Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Measuring and Testing Equipment
Road Markings - Traffic Signs
PRO
DU
CT O
VER
VIEW
SWISS MADE
ZEHNTNERT E S T I N G I N S T R U M E N T S
Peter Zehntner
Editorial
ZEHNTNERT E S T I N G I N S T R U M E N T S
The Zehntner brand has been standing for Swiss made high quality electronic and physical measuring and testing instruments for decades.
We believe in attention to detail: in our long-standing company we don‘t do things by halves.
Our experience of many years combined with the consistent and fast implementation of sug-gestions from our customers result in instru-ments meeting all our clients‘ requirements. We are committed to responding to your individual needs and are only satisfied if you are too.
Active membership in various standards com-mittees as well as our in-house development and manufacturing departments play a crucial role: innovative visions and latest technologies are im-plemented quickly and efficiently.
Our approach has stood the test of time and we take pride in the loyalty of our customers: once a Zehntner customer, always a Zehntner customer.We strive to extend our product range continu-ously and look forward to developing our busi-ness relationship.
“Innovative visions and latest technologies are implemented quickly and efficiently.“
Foundation „G. Zehntner Electronic“, Rei-goldswil. The company was active in the fields consumer and industrial electronics, medical technics including development and produc-tion of measuring and testing instruments.
Hand over to second generation. Peter Zehnt- ner, the current owner and Managing Director, runs the business initially under „P. Zehnt-ner Testing Instruments“. Concentration on measuring and testing instruments.
Change of the legal form into „Zehntner GmbH Testing Instruments“ and move to Hölstein in more spacious manufacturing premises.
„Seven in one go“: significant extension of physical test equipment range. Launch of the worldwide very first retroreflectometer for the combined determination of the night and day visibility with one handy unit.
Introduction of a new combined retroreflec-tometer RL/Qd additionally equipped with wet timer, detailed test report on A4/letter size paper and high long-term stability with auto-matic self-diagnosis.
Human reinforcement of the development department for a continuous enlargement of the product range.
40th anniversary and move to more spacious premises in Sissach.
Launch of a dynamic retroreflectometer RL for continuous measurement of the night visibility of road markings at normal traffic speed.
Launch of the very first retroreflectometer RL/Qd with colour touchscreen and auto- matic calibration standard recognition and with unique options such as camera.
Launch of the first budget priced retroreflec-tometer for fast and precise RL/Qd measure-ments and introduction of a new scratching tool as well as our improved hardness testers and mar resistance tester.
Launch of the first retroreflectometer for traffic signs and safety garments with LED illumination system and measurement of three different observation angles at the same time, colour recognition and colour touchscreen with adjustable display inclina-tion.
Launch of the ZRM 6013+ an optimised re-issue of the classic ZRM 6013 Retrore-flectometer RL/ Qd with touchscreen and faster measuring procedure.
1966
1992
1997
1999
2001
2004
2006
2007
2010
2011
2012
2014
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Unique features Year Picture Version Distance
• electrical standard positioning system 1981 ZRM 1011 15 m
1987ZRM 1012
15 m
1998 30 m
new generation:• the very first combined instrument for RL
and Qd• only 1 standard for calibration
1999 ZRM 1013 30 m
additionally with:• wet-timer• detailed test report on A4/letter size paper• measuring system with high long-term
stability; automatic self-diagnosis avoids mismeasurements
2001 ZRM 1013+ 30 m
additionally with:• ambient temperature (°C/°F)• relative humidity (rH %)• LED illumination
2006 ZRM 6013 30 m
additionally with:• 5.7“ colour touchscreen• fold-away telescopic handle• fixed mounted wheels• automatic calibration standard recognitionwith unique options such as:• a camera for pictures in the same geometry• level-meter & compass
2010 ZRM 6014 30 m
budget priced basic retroreflectometer fo- cused on the core functions to keep it simple and inexpensive
2011 ZRM 6006 30 m
relaunch of the classic ZRM 6013 2014 ZRM 6013+ 30 m
Zehntner products have a warranty period of two years, except where indicated otherwise. Some options, spare parts as well asmaintenance and calibration are without warranty.
Standard Products PageASTM D 711 ZTR 5080 13
ASTM D 713 ZMK 5050-54 ZND 2050-54
10 12
ASTM D 823ZAA 2300ZAF 2010ZUA 2000
101111
ASTM D 1200 ZFC 3015 10ASTM D 2794 ZIT 2440 14
ASTM D 3359 ZCC 2080ZCF 2088
1313
ASTM D 4414ZMK 5050-54ZND 2050-54
ZNW 2055
101212
ASTM D 5125 ZFC 3014 10ASTM D 7539 ZTR 5080 13ASTM E 1696 ZRP 6030 7ASTM E 1709 ZRS 6060 8
ASTM E 1710
ZDR 6020ZRM 6006
ZRM 6013+ZRM 6014ZVR 6000
46546
ASTM E 1809 ZRS 6060 8ASTM E 2176 ZDR 6020 4
ASTM E 2177 ZDR 6020ZRM 6006
4 6
Standard Products Page
ASTM E 2177 ZRM 6013+ZRM 6014
54
ASTM E 2302ZRM 6006
ZRM 6013+ZRM 6014
654
ASTM E 2540 ZRS 6060 8DIN 53211 ZFC 3012 10DIN 55984 ZRM 1021 7DIN 67520 ZRS 6060 8ECCA-T14 ZHC 1200 8ECE 104 ZRS 6060 8
EN 1436
SRT 5800ZDR 6020ZRM 1021ZRM 6006
ZRM 6013+ZRM 6014ZVR 6000
14476546
EN 1463-2 ZRP 6030 7
EN ISO 2409 ZCC 2080ZCF 2088
1313
EN ISO 2431 ZFC 3014 10
EN ISO DIN 2808ZMK 5050-54ZND 2050-54
ZNW 2055
101212
EN ISO 2814 ZRM 1021 7
Standard Products PageEN ISO DIN 4628-6 ZHC 1200 8
ISO 6272-1 ZIT 2440 14ISO 6272-2 ZIT 2440 14
EN 12899-1 ZIT 2440ZRS 6060
148
EN 13036-3 ZAM 5090 14EN 13036-4 SRT 5800 14
EN 13197
ZAP 5030ZMK 5050-54
ZMM 5000ZMP 5010
91099
EN DIN 13523-14 ZHC 1200 8EN DIN 20471 ZRS 6060 8
FGSV 387 App 7HK 715 spec. D2000 ZTR 5080 13
MUTCD MappingToolsZRS 6060
58
SN 640 511-3a ZAM 5090 14
ZTV M 13
AppSRT 5800ZAP 5030
ZMK 5050-54ZMM 5000ZMP 5010ZND 2052
ZNW 2055.50
7149
1099
1212
�
Portable handheld top class retroreflectometer for determination of night visibility (RL) and/or day visibil-ity (Qd) of all types of road markings as well as ambient temperature (°C/°F) and relative humidity (rH %) com-bined in one compact instrument
5.7“ high resolution colour touchscreen with excellent visibility under all light conditions
Fold-away telescopic handle and wheels for the first time included in the standard delivery for easy field and laboratory operation
Ultrafast measurement of RL and Qd in about 2 seconds Innovative options to customize the instrument to per-
sonal requirements. World first camera in the perspec-tive of the measuring geometry, compass and levelmeter, GPS unit and various printer versions
Getting the best value - vehicle mounted retroreflecto-meter for efficient and safe continuous measurements of the night visibility (RL) of all types of road markings
Handheld precision at up to 150 km/h (93 mph) Double and even triple lines are being recognized
automatically and stored separately Industrial grade touchscreen laptop and convenient
touchscreen driver display For all light conditions even bright sunlight GPS with dead reckoning (DR) providing accurate GPS
signals even in urban canyons and tunnels Measurements can be evaluated with the included map-
ping and data analysis software “MappingTools” thus providing a comprehensive solution
Equivalent observation distance 30 m, according to true CEN-geometryObservation angle EN 1436: 2.29°, ASTM E 1710: 1.05°Illumination angle RL: EN 1436: 1.24°, RL: ASTM E 1710: 88.76°Measuring area (WxL) ≥ 1‘000 mm x 880 mm (≥ 39.4“ x 34.65“), 6 m (19.7 ft) in front of the measuring headSpeed while measuring max. 150 km/h (93.21 mph)Measuring ranges RL: 0 - 4’000 mcd•m-2•lx-1, profiled markings: up to 20 mm (0.79“) Driver display 7“ touchscreenPicture interval 10 m (32.81 ft)Light source halogen lamp, working life approx. 1‘500 operating hoursAmbient conditions humidity: non condensing, operating: 0°C to +55°C (32°F-131°F), storage: -15°C to +60°C (5°F-140°F)Dimensions (LxWxH) measuring head: 270 mm x 207 mm x 310 mm (10.6“ x 8.2“ x 12.2“)Weight measuring head: 10.5 kg (23.1 lbs)Standards EN 1436 (RL), ASTM E 1710 (RL), ASTM E 2177 (RL wet), ASTM E 2176 (RL continuous wetting, withdrawn) EG directives EN 60950-1, EN 50371, EN 55022, EN 55024:1998 +A1:2001 + A2 2003Approval StrAus-Zert, Germany (test No. 0913-2009-05)
ZDR 6020 Dynamic Retroreflectometer RL
Retroreflectometer RL/Qd
Equivalent observation distance 30 m, according to CEN-geometryObservation angle EN 1436: 2.29°, ASTM E 1710: 1.05°Illumination angle RL: EN 1436: 1.24°, RL: ASTM E 1710: 88.76°, Qd: diffuseMeasuring area (WxL) 52 mm x 218 mm (2.05“ x 8.58“)Measuring sensor adaption V(l)Measuring range RL: 0 to 4’000 mcd•m-2•lx-1, Qd: 0 to 400 mcd•m-2•lx-1,
profiled markings: 5 mm (0.20“), up to 12 mm (0.47“) with instructionMeasuring time about 2 s (RL and Qd), single about 1 s, each without picturesMemory 1 GB SD flash memory, about 50‘000 measurements without pictures or about 25‘000 with pictures;
a bigger flash memory card is available as an optionInterfaces host USB (type A), client Mini USB (type B), optional: Bluetooth®
Touchscreen display 5.7“ colour TFT (LCD), LED backlight, VGA resolutionBattery Li-Ion-Mn 14,8 V / 6,3 AhAmbient conditions humidity: non condensing, operating: -10°C to +50°C (14°F-122°F), storage: -20°C to +60°C (5°F-140°F)Calibration traceable to the independent accreditation body METAS Switzerland (No. 116-02242)Dimensions (LxWxH) 560 mm x 190 mm x 280 mm (22.05“ x 7.48“ x 11.02“)Weight 7.6 kg (16.76 lbs)Standards EN 1436 (RL/Qd), ASTM E 1710 (RL), ASTM E 2302 (Qd), ASTM E 2177 (RL wet)
ZRM 6014
4
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Free versatile mapping and data analysis software for the models ZDR 6020 Dynamic retroreflectometer RL, ZRM 6013+ Retroreflectometer RL/Qd, ZRM 6014 Retro- reflectometer RL/Qd and ZRS 6060 Retroreflectometer
Makes your administration and analysis of road mark-ings, traffic signs and/or safety garments measurements simple and easy
Measurements containing GPS coordinates can be displayed on a map in different colours using adjustable profiles as well as alternatively exported to Google Earth™
Generating of measuring reports as PDF- or XLS-files Menu-guided in several languages: English, Czech,
French, Dutch, German, Italian, Polish, Portuguese, Romanian, Spanish, Swedish and Thai (at the time of printing, further languages are continuously implemented)
Software for ZDR 6020, ZRM 601�+, ZRM 6014and ZRS 6060MappingTools
The classic portable handheld retroreflectometer with memory for determination of night visibility (RL) and/or day visibility (Qd) of road markings as well as ambient temperature (°C/°F) and relative humidity (rH %)
5.7” high resolution colour touchscreen with excellent visibility under all light conditions
Ultrafast retroreflection measurement (RL and Qd) in about 2 seconds
For all types of road markings The ZRM 6013+ Retroreflectometer is in accordance
with EN 1436 (RL/Qd), ASTM E 1710 (RL), ASTM E 2302 (Qd) and ASTM E 2177 (RL wet)
Factory calibration traceable to the independent accreditation body METAS, Switzerland
Approved by independent test laboratory BASt (Federal Highway Research Institute, DE) (test No. BASt-V4 22/2006)
Retroreflectometer RL/Qd
Equivalent observation distance 30 m, according to CEN-geometryObservation angle EN 1436: 2.29°, ASTM E 1710: 1.05°Illumination angle RL: EN 1436: 1.24°, RL: ASTM E 1710: 88.76°, Qd: diffuseMeasuring area (WxL) 52 mm x 218 mm (2.05“ x 8.58“)Measuring sensor adaption V(λ)Measuring range RL: 0 to 4’000 mcd•m-2•lx-1, Qd: 0 to 400 mcd•m-2•lx-1,
profiled markings: 5 mm (0.20“), up to 12 mm (0.47“) with instructionMeasuring time about 2 s (RL and Qd), single about 1 sMemory 1 GB SD flash memory, about 50‘000 measurements,
a bigger flash memory card is available as an optionInterfaces host USB (type A), client Mini USB (type B)Touchscreen display 5.7“ colour TFT (LCD), LED backlight, VGA resolutionBattery Li-Ion-Mn 14,8 V / 6,3 AhAmbient conditions humidity: non condensing, operating: -10°C to +50°C (14°F-122°F), storage: -20°C to +60°C (5°F-140°F)Dimensions (LxWxH) 560 mm x 190 mm x 280 mm (22.05“ x 7.48“ x 11.02“)Weight 6.8 kg (14.99 lbs)Standards EN 1436 (RL/Qd), ASTM E 1710 (RL), ASTM E 2302 (Qd), ASTM E 2177 (RL wet)
ZRM 601�+
Can be used with ZDR 6020, ZRM 6013+, ZRM 6014 and ZRS 6060Operating system Windows® 8, Windows® 7, Windows Vista®, Windows® XP SP2System requirement memory (RAM) min. 512 MB, 1 GB recommendedSystem requirement hard disc space min. 20 MB plus space for measurementsStandards MUTCD
�
Mobile, user-friendly retroreflectometer for visual determination of night visibility of road markings using comparison standards
Multifunctional, sturdy arm for operation with carrying handle; wheels
Splash-proof for testing in wet condition Easy to handle Sturdy construction
Equivalent observation distance 30 m, according to CEN-geometryObservation angle EN 1436: 2.29°, ASTM E 1710: 1.05°Illumination angle EN 1436: 1.24°, ASTM E 1710: 88.76°Test area (WxL) 50 mm x 160 mm (2“ x 6.3“)Comparison standards (WxL) 50 mm x 150 mm (2“ x 5.9“)Testing principle according to MuenchDimensions (LxWxH) 550 mm x 165 mm x 730 mm (21.7“ x 6.5“ x 28.8“)Battery 4 Alkaline type AAWeight 3.6 kg (7.9 lbs)Standards EN 1436, ASTM E 1710
ZVR 6000 Visual Retroreflectometer RL
Budget priced user-friendly entry level retroreflecto- meter with one button operation for measuring night visibility (RL) and day visibility (Qd) of road markings as well as ambient temperature (°C/°F) and relative humidity (rH %)
Focussed on the core functions to keep it simple and inexpensive
Ultrafast measurement of RL and Qd in about 2 seconds For all types of road markings In accordance with EN 1436 (RL/Qd), ASTM E 1710 (RL),
ASTM E 2302 (Qd), ASTM E 2177 (RL wet) Factory calibration traceable to the independent
accreditation body METAS, Switzerland Approved by the accredited association StrAus-Zert,
Germany (test No. 0913-2011-03)
Equivalent observation distance 30 m, according to CEN-geometryObservation angle EN 1436: 2.29°, ASTM E 1710: 1.05°Illumination angle RL: EN 1436: 1.24°, RL: ASTM E 1710: 88.76°, Qd: diffuseMeasuring sensor adaption V(λ)Measuring area (WxL) 52 mm x 218 mm (2.05“ x 8.58“)Measuring ranges RL: 0 to 4’000 mcd•m-2•lx-1, Qd: 0 to 400 mcd•m-2•lx-1,
profiled markings: up to 5 mm (0.20“); up to 12 mm (0.47“) with instructionMeasuring time about 2 s (RL and Qd)Memory noneDisplay transflective luminous graphical LCD display with LED backlightBattery Li-Ion-Mn 14.8 V / 6.3 AhAmbient conditions humidity: non condensing, operating: -10°C to +50°C (14°F to 122°F),
storage: -20°C to +60°C (-4°F to 140°F)Dimensions (LxWxH) 560 mm x 190 mm x 280 mm (22“ x 7.5“ x 11“)Weight 6.4 kg (14.11 lbs)Standards EN 1436 (RL/Qd), ASTM E 1710 (RL), ASTM E 2302 (Qd), ASTM E 2177 (RL wet)
ZRM 6006 Retroreflectometer RL/Qd
6
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Portable handheld retroreflectometer for determination of the retroreflection value R of road studs, ambient tem-perature (°C/°F) as well as relative humidity (rH %) com-bined in one compact instrument
For all types of retroreflective road studs Usable at any time of the day or night With intelligent memory, interfaces for PC and printer Measuring system with high long-term stability ensures
constant measuring accuracy and thus reliable measuring results; automatic self-diagnosis avoids mismeasurements
ZRP 60�0 Retroreflectometer R
Versions Observation angle
Illumination angle Standards Measuring range Measuring area
(WxH) Weight
ZRP 6030.2 0.2° 1° ASTM E 16960 to 2’000 mcd•lx-1 130 mm x 30 mm
(5.12“ x 1.18“)7.1 kg (15.7 lbs) / 8.4 kg
(18.5 lbs) incl. remote controlZRP 6030.3 0.3° 1° EN 1463-2
Measuring sensor adaption V(l)Memory over 1‘000 single or average valuesDisplay luminous graphical displayBattery Li-Ion-Mn 14.8 V / 6.3 AhDimensions (LxWxH) 560 mm x 190 mm x 280 mm (22“ x 7.5“ x 11“),
max. road studs: 140 mm x 160 mm x 60 mm (5.5“ x 6.3“ x 2.4“)
Digital picture analysis software for determination of the degree of surface coverage of agglomerate road mark-ings at vertical observation
The Zehntner App can take new pictures and carry out an analysis of the surface cover ratio on the spot as well as analyse existing pictures
For easy access all test results are stored in the separate Zehntner App gallery
Easy to handle Reliable test results
Can be used with iPhone®, iPad®, iPad mini®, Android Smartphones and Android TabletsStandards FGSV code of practice No. 387 2006, ZTV M 13
Zehntner App Software for Smartphones and Tablets
Sturdy, portable and battery-powered precision reflectometer for determination of whiteness, lightness, opacity and hiding power of paints, inks and coatings
For determination of day visibility (luminance factor β) of dry road markings
Easy to handle Reliable measuring values
Geometry 45/0°Measuring accuracy ± 1 %Measuring sensor adaption V(l)Display LCD, 3 ½ digitsLight source halogen lamp, standard illuminant C Power supply integrated, rechargeable batteryDimensions (LxWxH) 190 mm x 53 mm x 110 mm (7.48“ x 2.09“ x 4.33“)Weight 1 kg (2.20 lbs)Standards DIN 55984, EN 1436, EN ISO 2814 (withdrawn in 2013)
ZRM 1021 Reflectometer 4�/0°
�
Unique measuring instrument for quantitative determi-nation of degree of chalking resulting from natural or artificial weathering of coatings
Direct measurement of light-transmitting properties (lu-minous transmittance) of samples
The very first chalking tester with a touchscreen where you can immediately read off the degree of chalking
Superior sensitivity at the most crucial initial chalking stages and high accuracy also with regard to coloured pigments
Reliable and objective measuring results Reproducible results independent of the individual person
ZHC 1200 HELMEN®-Chalking Tester
Measuring range 0 % to 100 % chalking (relative)Measuring area 14 mm (0.55“) in diameterAccuracy ± 1%Touchscreen display monochrome, 128 x 64 pixel white luminous graphical displayPower supply 2 batteries AA or USB-poweredDimensions (LxWxH) 154 mm x 105 mm x 33.2 mm (6.06“ x 4.13“ x 1.31“), specimen for transmittance: length: min. 32 mm
(1.26“), width: min. 16 mm - max. 25 mm (min. 0.63“ - max. 0.98“), thickness: max. 3 mm (0.12“)Weight 613 g (1.35 lbs)Standards EN DIN 13523-14, EN ISO DIN 4628-6, ECCA-T14
New generation of ergonomic retroreflectometer for determination of night visibility (coefficient of retroreflec-tion RA and R’) of traffic signs, safety garments and other reflexive materials with measurement of three different observation angles at the same time
The very first retroreflectometer with LED illumination system and with a 3.5” high resolution colour touchscreen with adjustable display inclination for excellent visibility under all light conditions also in bright sunlight
For all kinds of retroreflective materials and colours, with automatic colour indication
Continuously updated average value; additionally each single measurement is stored
Measurements can be evaluated with the included mapping and data analysis software “MappingTools”
Easy to operate with polyglot menu navigation Sturdy construction and ergonomic design Factory calibration traceable to the independent accredi-
tation body METAS, Switzerland
RetroreflectometerZRS 6060
Measuring sensor adaption V(l)Measuring time about 3 sMemory 1 GB SD flash memory, about 1‘000‘000 measurementsInterfaces host USB (type A), client Mini USB (type B), optional: Bluetooth®
Touchscreen display 3.5“ colour TFT (LCD), LED backlight, HVGA resolutionBattery Li-Ion-Mn 14,8 V / 6,3 AhAmbient conditions humidity: non condensing, operating: 0°C - +50°C (32°F-122°F), storage: -20°C - +55°C (-4°F-131°F)Dimensions (LxWxH), Weight 220 mm x 85 mm x 290 mm (8.66“x3.35“x11.42“), 1.9 kg (4.19 lbs)
Versions Illumination angle β
Observation angle α Application Standards Measuring
rangeMeasu-
ring area
6060.ASTM -4° 0.2°, 0.5°, 1°
ASTM E 1709, ASTM E 1809 (with-drawn in 2010), ASTM E 2540, MUTCD
0 - 2‘000 cd•lx-1•m-2
Ø 25 mm (0.98“)
6060.CD 5° 0.2°, 0.33°, 0.5°
DIN 67 520, EN 12899-1, EN DIN 204716060.DE 5° 0.2°, 0.33°, 1°
6060.EN 5° 0.2°, 0.33°, 2°
6060.CEN 5° 0.33°, 0.5°, 1°
DIN 67 520, EN 12899-1
6060.A.S* -4° 0.2°, 0.33°, 0.5°, 1°, 1.5° or 2°*
depending on choosen specifications*(please choose 3 observation angles)6060.C.S* 5°
�
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Inexpensive wedge gauge for quick determination of dry film thickness of road markings and similar coatings
Test results are easily readable Easy to operate Sturdy construction Made of red hard finish solvent-resistant aluminium
ZMP �010 Marking-wedge Gauge
Test range 0 mm to 10 mm (0“ to 0.4“)Resolution 0.1 mm (3.94 mil)Dimensions length of the wedge: 220 mm (8.7“),
length of the gauge: 200 mm (7.9“)Weight 400 g (0.88 lbs)Standards EN 13197, ZTV M 13
Unique precision marking gauge with digital display for rapid determination of dry film thickness of road markings and similar coatings
Measurements relative to the substrate or to the marking itself are possible
Optional measuring bridge for measurements over the whole width of the marking for representative measurements on wide road markings as well as for drawing up cross-sections
Always ready for use thanks to solar-cell power Digital display providing reliable measuring results
within seconds Made of red anodised aluminium
ZMM �000 Digital Marking Gauge
Measuring range -12.5 mm to +12.5 mm, optional: -0.5“ to +0.5“Resolution 10 µm (0.4 mil)Bearing area (WxL) min. 67 mm x 100 mm (2.64“ x 3.94“)Display digitalDimensions (LxWxH) 180 mm x 70 mm x 80 mm (7.1“ x 2.8“ x 3.15“)Weight 880 g (1.9 lbs)Standards EN 13197, ZTV M 13Warranty 2 years, digimatic indicator: 1 year
Sturdy marking wedge gauge for fast determining the dry film thickness of road markings and especially audio tactile profiled road markings
Testing over the whole width of the marking for repre-sentative test results on wide road markings as well as for drawing up cross-sections
Test results are easily readable Easy to operate Sturdy construction Made of red hard finish solvent-resistant aluminium
(wedge) and anodised aluminium (measuring bridge)
ZAP �0�0 Marking-wedge Gauge
Test range 0 mm to 13 mm (0“ to 0.51“)Resolution 0.1 mm (3.94 mil)Dimensions (LxWxH) wedge: 282 mm x 18 mm x 28 mm (11.10“ x 0.71“ x 1.10“),
measuring bridge: 500 mm x 40 mm x 70 mm (19.69“ x 1.57“ x 2.76“)Weight wedge: 292 g (0.64 lbs), measuring bridge: 767 g (1.69 lbs)Standards EN 13197, ZTV M 13
�
Handy kits, specially designed for the quality control of road markings with the entire range of measuring and test equipment for determination of the wet film thickness, dry film thickness (only ZMK 5051-5053), temperature, relative humidity as well as the amount and embedding of drop-on-materials
Comprehensive set of tools for self-monitoring or supervision of contractors
Easy to handle Reliable and rapid results
ZMK �0�0 - �0�4 Road Marking Control Kits
Standards ASTM D 713, ASTM D 4414, EN ISO DIN 2808, EN DIN 13197, ZTV M 13Warranty Zehntner-products: 2 years, trade products: 1 year
Useful test devices for rapid determination of flow time of paints, varnishes and similar liquids
Easy to handle Easy to clean Made of anodised aluminium (cup) and stainless steel
(jet)
ZFC �012 - �01� Immersion Flow Cups
Versions Cup With fixed jet Standards Image
ZFC 3012 immersion flow cup No. 1, 2, 3, 4, 5, 6, 7 or 8 based on DIN 53211 (withdrawn in October 1996)
ZFC 3014 immersion flow cup No. 3, 4, 5 or 6 EN ISO 2431, ASTM D 5125
ZFC 3015 immersion flow cup (Ford) No. 1, 2, 3, 4 or 5 ASTM D 1200
Automatic laboratory equipment for accurate and re- producible application of coating materials, adhesives and similar products with almost all film applicators, independent of the operator
Multifunctional use with reversible, double sided glass plate (glass/printing blanket), easy to turn over or to change
Adjustable application area with moveable start and stop positions
Optional versions equipped with isolation plate for use with heatable vacuum plates or heating plates
Made of red anodised aluminium (housing), glass (glass surface of glass plate) and rubber coated cotton (printing blanket)
ZAA 2�00 Automatic Film Applicator Coater
Versions Drawing speed Resolution DimensionsZAA 2300 0 - 99 mm/s
(0 - 3.90“/s) 1 mm/s (0.04“/s) unit: 565 x 382 x 190 mm (22.24“ x 15.04“ x 7.48“); glass plate: 553 x 300 x 15 mm (21.77“ x 11.81“ x 0.59“);
application length: 1 mm - 400 mm (0.04“ - 15.75“); application width: 1 mm - 300 mm (0.04“ - 11.81“);
substrate thickness up to 11 mm (0.43“)
ZAA 2300.H for heatable platesZAA 2300.F 0 - 247.5 mm/s
(0 - 9.74“/s) 2.5 mm/s (0.10“/s)ZAA 2300.FH for heatable platesZAA 2300.FF 0 - 495 mm/s
(0 - 19.49“/s) 5 mm/s (0.20“/s)ZAA 2300.FFH for heatable plates
Tolerance of drawing speed 2300 and 2300.H: 0 - 90 mm/s (0 - 3.54“/s): ± 1 %, > 90 mm/s (> 3.54“/s): ± 3 %2300.F and 2300.FH: 0 - 225 mm/s (0 - 8.86“/s): ± 1 %, > 225 mm/s (> 8.86“/s): ± 3 %2300.FF and 2300.FFH: 0 - 450 mm/s (0 - 17.72“/s): ± 1 %, > 450 mm/s (> 17.72“/s): ± 3 %
Power supply 100 V - 240 V, 50 Hz - 60 HzWeight, total 20 kg (44.09 lbs), versions for heatable plates 22.8 kg (50.27 lbs)Weight glass plate 6.4 kg (14.11 lbs)Standards ASTM D 823
10
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Applicator for universal use, with gap height adjustable from 0 µm - 3‘000 µm (0 mil - 118.11 mil), for preparing uniform films or wedge-shaped layers up to a difference of 3‘000 µm (118.11 mil) of coating materials, adhesives and similar products on flat substrates
Easy to handle Easy to dismantle and reassemble for cleaning Made of red hard finish solvent-resistant aluminium
ZUA 2000 Universal Applicator
Versions Film width Gap heights / wedge-shaped layer Dimensions (LxWxH) Weight Standards
ZUA 2000.60 60 mm (2.36“) 0 µm - 3‘000 µm (0 mil - 118.11 mil)
in steps of 5 µm (0.20 mil)
Tolerance:±10 µm (0.39 mil)
100 mm x 60 mm x 40 mm (3.94“ x 2.36“ x 1.58“) 229 g (0.50 lbs)
ASTM D 823
ZUA 2000.80 80 mm (3.15“) 120 mm x 60 mm x 40 mm (4.72“ x 2.36“ x 1.58“) 258 g (0.57 lbs) ZUA 2000.100 100 mm (3.94“) 140 mm x 60 mm x 40 mm (5.51“ x 2.36“ x 1.58“) 286 g (0.63 lbs) ZUA 2000.150 150 mm (5.90“) 190 mm x 60 mm x 40 mm (7.48“ x 2.36“ x 1.58“) 358 g (0.79 lbs) ZUA 2000.200 200 mm (7.90“) 240 mm x 60 mm x 40 mm (9.45“ x 2.36“ x 1.58“) 445 g (0.98 lbs) ZUA 2000.220 220 mm (8.70“) 260 mm x 60 mm x 40 mm (10.24“ x 2.36“ x 1.58“) 476 g (1.05 lbs)
ZUA 2000.S on request depending on version
High quality test charts in various sizes and designs, UV lacquered or unlacquered, with or without optical brightener
Test charts are a perfect substrate for preparing uniform films or wedge-shaped layers of coating materials, adhesives and similar products on flat substrates
Determination of hiding power by visual inspection or with a reflectometer 45/0°
ZTC 2200 Test Charts
Versions Design: square foot horizontally half/half zebra
Dimensions:
A3 (297 mm x 420 mm x 0.05 mm) (11.69“ x 16.54“ x 0.002“), A4 (210 mm x 297 mm x 0.05 mm) (8.27“ x 11.69“ x 0.002“), A5 (148 mm x 210 mm x 0.05 mm) (5.83“ x 8.27“ x 0.002“) or A6 (105 mm x 148 mm x 0.05 mm) (4.13“ x 5.83“ x 0.002“)
Optical brightener:
with, not suitable for colour measurements or without, suitable for colour measurements
Lacquering: UV lacquered or unlacqueredColour white: 80-90 L-values, black: <7 L-valuesWarranty none
Applicator frame for applying uniform films of coating materials, adhesives and similar products on flat substrates
The 4-sided applicator frame has the big advantage that the coating material filled in cannot get below the guide surfaces resulting in clean and accurate applications
Easy to handle Made of stainless steel
ZAF 2010 4-sided Applicator Frame
Versions Gap heights Film width Dimensions (LxWxH) Weight Standards ZAF 2010.6030 30, 60, 90 and 120 µm (1.18, 2.36, 3.54 and 4.72 mil)
60 mm (2.36“)70 mm x 29 mm
x 14 mm (2.76“ x 1.14“ x 0.55“)
174 g(0.38 lbs)
ASTM D 823
ZAF 2010.6050 50, 100, 150 and 200 µm (1.97, 3.94, 5.91 and 7.87 mil)ZAF 2010.60S on request from 5 µm to 2‘000 µm (0.20 - 78.74 mil)
ZAF 2010.8030 30, 60, 90 and 120 µm (1.18, 2.36, 3.54 and 4.72 mil)80 mm (3.15“)
90 mm x 29 mm x 14 mm
(3.54“ x 1.14“ x 0.55“)
186 g(0.41 lbs) ZAF 2010.8050 50, 100, 150 and 200 µm (1.97, 3.94, 5.91 and 7.87 mil)
ZAF 2010.80S on request from 5 µm to 2‘000 µm (0.20 - 78.74 mil)
ZAF 2010.2S on request from 5 µm to 2‘000 µm (0.20 - 78.74 mil)on request from 10 mm - 200 mm
(0.39“ - 7.87“)depending on film width
11
Comb gauges for determining the thickness of all types of liquid coatings
An alternative to ZNW 2055 Wet film thickness wheel and ZWW 2100 - 2108 Wet film wheels
Can be ordered with individual company logo for orders of 40 pieces or more
Easy to clean Made of stainless steel except ZND 2050.A which is made
of aluminium
Versions Test range Resolution Standards
ZND 205025 µm - 2‘000 µm
(1 mil - 80 mil) (hexagonal)
25 - 300 µm (1 mil - 12 mil): 25 µm (1 mil); 300 - 1‘000 µm (12 mil - 40 mil): 50 µm (2 mil);
1‘000 - 2‘000 µm (40 mil - 80 mil): 100 µm (4 mil)
EN ISO DIN 2808, ASTM D 4414, ASTM D 713 ZND 2052:
additional ZTV M 13
ZND 2050.A25 µm - 2‘000 µm
(1 mil - 80 mil) (hexagonal)
25 - 300 µm (1 mil - 12 mil): 25 µm (1 mil); 300 - 1‘000 µm (12 mil - 40 mil): 50 µm (2 mil);
1‘000 - 2‘000 µm (40 mil - 80 mil): 100 µm (4 mil)
ZND 20515 µm - 150 µm
(0.20 mil - 5.91 mil) (hexagonal)
5 µm - 45 µm (0.20 mil - 1.77 mil): 5 µm (0.20 mil);50 µm - 110 µm (1.97 mil - 4.33 mil): 10 µm (0.39 mil);110 µm - 150 µm (4.33 mil - 5.91 mil): 20 µm (0.79 mil)
ZND 2052100 µm - 950 µm
(3.94 mil - 37.40 mil) (pentagonal)
25 µm (0.98 mil)
ZND 20532 mm - 10 mm (0.08“ - 0.39“)(pentagonal)
2 mm - 6 mm (0.08“ - 0.24“): 0.2 mm (7.87 mil)6 mm - 10 mm (0.24“ - 0.39“): 0.5 mm (19.69 mil)
ZND 2054 on request on request
ZND 20�0 - 20�4 Wet Film Thickness Gauges
Thickness wheel for checking the thickness of all types of liquid coatings also on convex and concave surfaces
An alternative to ZND 2050 - 2054 Wet film thickness gauges and ZWW 2100 - 2108 Wet film wheels
Can be ordered with individual company logo for orders of 40 pieces or more
Easy to clean Made of stainless steel
Versions Test range Resolution Standards2055.05 5 µm - 180 µm (0.20 mil - 7.09 mil) 5 µm (0.20 mil)
EN ISO DIN 2808,ASTM D 4414,ZNW 2055.50:
additional ZTV M 13
2055.25 25 µm - 900 µm (0.98 mil - 35.43 mil) 25 µm (0.98 mil)
2055.50 25 µm - 2‘000 µm (1 mil - 80 mil)
25 - 300 µm (1 mil - 12 mil): 25 µm (1 mil); 300 - 1‘000 µm (12 mil - 40 mil): 50 µm (2 mil);
1‘000 - 2‘000 µm (40 mil - 80 mil): 100 µm (4 mil)
2055.01 100 µm - 3‘600 µm (3.94 mil - 141.73 mil) 100 µm (3.94 mil)
2055.S on request on request
ZNW 20�� Wet Film Thickness Wheel
Gauges for testing coating materials and fillers for drying properties, shrinking, mud-crack, cracking and porosity
Easy to handle Reliable results Easy to clean Made of red hard finish solvent-resistant aluminium
(gauge) and hardened stainless steel (scraper)
Versions Test range Graduation Test area (LxW)ZTK 2060 0 mm to 3.0 mm (0“ to 0.12“) 0.1 mm (3.94 mil) 300 mm x 60 mm (11.81“ x 2.36“)ZTK 2061 0 mm to 2.0 mm (0“ to 0.08“) 0.1 mm (3.94 mil) 200 mm x 60 mm (7.87“ x 2.36“)ZTK 2062 on request on request on request
ZTK 2060 - 2062 Drying Gauges
12
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Laboratory test equipment for determination of drying time after application of road markings
This laboratory test method determines the no-pick-up time required for the tire of an automobile to not leave marking traces
Reliable results Easy to assemble and to clean Made of stainless steel (cylinder) and red anodised
aluminium (ramp)
Drying Time Wheel
Dimensions (ØxH) cylinder 160 mm x 95 mm (6.3“ x 3.7“)Dimensions (LxWxH) ramp 152 mm x 90 mm x 25 mm (6“ x 3.5“ x 1.0“)Weight cylinder 5‘386 g (11.87 lbs)Weight ramp 445 g (0.98 lbs)Slope of ramp 1:6Standards ASTM D 711, ASTM D 7539, rings meeting the requirements of HK 715 spec. D2000
ZTR �0�0
Sturdy test equipment with ergonomic handle for deter-mination of adhesion of thin and thick single or multi-coat systems
The unit is equipped with shims for cutting spaces of 1 mm (0.04”), 2 mm (0.08”) and 3 mm (0.12”) and is hence suitable for all film thicknesses
An alternative to our ZCC 2080 Cross-cut tester with ergonomic handle for more comfortable and less tiring handling
Easy to handle Made of red anodised aluminium (main body),
stainless steel (shims) and plastic (handle)
Sturdy cross-cut tester with stainless steel shims for adhesion tests of single or multi-coat systems
Easy to handle Made of red anodised aluminium (main body),
stainless steel (shims)
ZCF 20�� Cross-cut Tester
ZCC 20�0 Cross-cut Tester
Versions Shims Standards SetZCC 2080.1K 10 x 1 mm (0.04“) ASTM D 3359, EN ISO 2409
with NT-cutter, adhesive tapeZCC 2080.3K 6 x 3 mm (0.12“) EN ISO 2409ZCC 2080.1G 10 x 1 mm (0.04“) ASTM D 3359, EN ISO 2409
with NT-cutter, adhesive tape, brush and magnifierZCC 2080.3G 6 x 3 mm (0.12“) EN ISO 2409
Dimensions (LxWxH) 65 mm x 60 mm x 15 mm (2.56“ x 2.36“ x 0.59“)Weight 285 g (0.63 lbs)
Versions Shims Standards SetZCF 2088.K 11 x 1 mm (0.04“), 6 x 2 mm (0.08“)
and 6 x 3 mm (0.12“)ASTM D 3359, EN ISO 2409
with NT-cutter and adhesive tapeZCF 2088.G with NT-cutter, adhesive tape, brush and magnifier
Dimensions (LxWxH) 90 mm x 90 mm x 42 mm (3.54“ x 3.54“ x 1.65“)Weight 440 g (0.97 lbs)
1�
Portable Skid Resistance Tester for determining slip resistance and friction (pendulum test value PTV) of road markings and all kind of flooring materials
Comes now also with conditioning and/or verification surfaces ensuring correct test results and a multi- purpose sample holder
A special ABS flight case with wheels is optionally available for superior protection and easy transportation
This reference instrument has been used all over the world for many years
SRT ��00 Portable Skid Resistance Tester
Dimensions (LxWxH) 830 mm x 750 mm x 350 mm (32.7“ x 29.5“ x 13.8“)Weight 28 kg (61.7 lbs)Standards EN 1436, EN 13036-4, ZTV M 13Warranty 1 year
Flow measuring unit according to Moore for determina-tion of the horizontal drainability of a pavement surface and for checking the macro texture (roughness)
The ideal addition to our SRT 5800 Portable Skid Resistance Tester
Easy to handle Reliable results Made of acrylic glass (cylinder), brass (carrier /
weighting ring) and rubber (guide ring and seal)
ZAM �0�0 Flow Measuring Unit according to Moore
Production tolerance ± 10 g (± 0.35 oz)Dimensions flow measuring unit: Ø 160 mm x 410 mm (6.3“ x 16.1“),
with storage box: 500 mm x 250 mm x 250 mm (19.7“ x 9.8“ x 9.8“)Weight flow measuring unit: 3.5 kg (7.7 lbs), with storage box: 5.0 kg (11 lbs)Standards EN 13036-3, SN 640 511-3a
Impact tester for determination of impact resistance, deformability and elongation of coatings and substrates as well as adhesion of the coating
A quick clamping device for fast and easy insertion and fixing of the sample
The indenter can easily be lifted after the test in order to facilitate removal of the sample
Suitable for single- and multiple-layer systems No maintenance necessary Easy and safe to handle Made of anodised aluminium As an option we offer additional testing kits according to
EN 12899-1 for testing traffic signs and ISO 6272-2
ZIT 2440 Impact Tester
Versions Dimensions Weights Standards
Basic set ZIT 2440.G adjustable falling height:graduation resolution:total length guide tube:
max. 101.6 cm (40.00”)1 cm (0.39“) and 0.50“137 cm (53.94“)
set: 4.9 kg (10.80 lbs)
Set ZIT 2440.A indenter Ø:die inside Ø:die outside Ø:thickness of test panel:
15.9 mm (0.63“)16.3 mm (0.64“)44 mm (1.73“)max. 1 mm (0.04“)
falling weight: 0.91 kg (2.01 lbs)set: 1.95 kg (4.30 lbs)total: 6.6 kg (14.55 lbs)
ASTM D 2794
Set ZIT 2440.I hemispherical head Ø:die inside Ø:die outside Ø:thickness of test panel:
20 mm (0.79“)27 mm (1.06“)44 mm (1.73“)max. 4 mm (0.16”)
falling weight: 1.0 kg (2.20 lbs)set: 1.95 kg (4.30 lbs)total: 6.85 kg (15.10 lbs)
ISO 6272-1
14
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
ZEHNTNERT E S T I N G I N S T R U M E N T S
Graphical illustration of the measuring principle of RL and Qd
Night visibility RL
Measures the coefficient of retroreflected luminance (night visibility) of road markings. The observation angle of 2,29° corresponds to the viewing distance of a vehicle driver of 30 m under normal conditions. The illumination angle is 1,24°.
Day visibility Qd
Measures the luminance coefficient under diffuse illumination (day visibility) of road markings. The observation angle of 2,29° corresponds to the viewing distance of a vehicle driver of 30 m under normal conditions. The illumination must be diffused light.
Different illustration of RL
Different illustration of the same angles in the standards EN 1436 and ASTM E 1710.
Alphabetical index
App ..................................................................................................7Automatic Film Applicator Coater - ZAA 2300 .............................10Cross-cut Tester - ZCC 2080, ZCF 2088 .......................................13Digital Marking Gauge - ZMM 5000 ................................................9Drying Gauges - ZTK 2060 - 2062 .................................................12Drying Time Wheel - ZTR 5080 .....................................................13Dynamic Retroreflectometer RL - ZDR 6020 ..................................4Flow Measuring Unit according to Moore - ZAM 5090 .................14Four-sided Applicator Frame - ZAF 2010 .....................................11Helmen®-Chalking Tester - ZHC 1200 ...........................................8Immersion Flow Cups - ZFC 3012, ZFC 3014, ZFC 3015 ..............10Impact Tester - ZIT 2440 ...............................................................14MappingTools ..................................................................................5
Marking Wedge-gauge - ZAP 5030, ZMP 5010 ...............................9Portable Skid Resistance Tester - SRT 5800 ................................14Reflectometer 45/0° - ZRM 1021 ....................................................7Retroreflectometer - ZRS 6060 ......................................................8Retroreflectometer R - ZRP 6030 ...................................................7Retroreflectometer RL/Qd - ZRM 6006, 6013+, 6014 .............. 6, 5, 4Road Marking Control Kits - ZMK 5050 - 5054 .............................10Software - App, MappingTools ....................................................7, 5Test Charts - ZTC 2200 .................................................................11Universal Applicator - ZUA 2000 ..................................................11Visual Retroreflectometer RL - ZVR 6000 .......................................6Wet Film Thickness Gauges - ZND 2050 - 2054 ...........................12Wet Film Thickness Wheel - ZNW 2055 .......................................12
Illustrations, descriptions as well as the technical specifications correspond to the brochure at hand for the time of printing. Subject to change resulting from technical improvement, modified construction or similar changes. This brochure has been issued with the utmost care. Nevertheless, errors can not entirely be eliminated. The author shall not be liable for errors contained herein or for incidental or consequential damages resulting from possible errors. We would therefore welcome any suggestions and references to errors. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. © Zehntner IcQ2014 Printed in Switzerland
1�
Our competence: Development, manufacturing and world-wide sales of Swiss precision optoelectronic and physi-cal measuring and testing instruments for all types of surfaces Our customers: Paint, varnish, paper and reprocessing industries, chemical industry, research institutes, traffic authorities, manufacturers of road construction materials Our sales agencies: Our products are distributed all over the world by independent sales agents and representatives Our speciality: Thanks to our own development team and manufacturing plant in Switzerland we can respond to individual special customer demands in addition to the whole range of standard equipment with the well known Swiss precision quality
ZEHNTNERT E S T I N G I N S T R U M E N T S
Zehntner GmbH Testing Instruments, Gewerbestrasse 4, CH-4450 Sissach, SwitzerlandTel. +41 (0)61 953 05 50, Fax +41 (0)61 953 05 51, [email protected], www.zehntner.com
The Swiss manufacturer of precision measuring and testing instruments for quality control of all types of surfaces