Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
ZIP52FINISHING
marketing plan
UNIT COMPOSITION
ZIP52 FINISHING
THE BASIC VERSION IS COMPLETE WITH:
1) Frame with three air regulators and three gauges (pump – atomization – fluid)
2) Pump model ZIP 52
3) Cock and recycle hose
4) FINE FLOW CONTROLLER with 100 mesh filter
5) Air inlet intercepting valve
6) Flexible suction hose with stainless steel rigid pipe
2
1 4
5
3
6
Technical Specifications
ZIP52 FINISHING
max. fluid pressure bar 7,8
air feeding pressure bar 1-8
max. delivery of bare pump lpm 52
noise level* dB(A) 76
max. temperature** in operation °C 85
air fitting diameter ¼” BSP
* LAeq - working at 4,8 bar and 50 cycles/min.
** Metallic pump with PTFE diaphragm and metallic valves
pressure ratio 1:1
The Advantages • INNOVATIVE PUMP ZIP 52, state of the art in the field for its characteristics,
performances and reliability. Motor RUNNER: higher exchange speed, reduced air consumption, antistalling valve; fluid OR in PTFE, max. delivery over 50 lt/min, over-pressure integrated valve, limited pump dimensions (less space and quicker washing), more suction power.
• COMPLETE EQUIPMENT: to satisfy every application requirement.
• NO PULSATIONS: perfect control of the pumped fluid thanks to the exclusive system FINE FLOW CONTROLLER 3 in1 (WAGNERCOLORA PATENT)
• EASY TO USE: air and paint regulation are placed in a convenient and easy-to-see position on the front dashboard
• NO DEAD SPACES to facilitate the cleaning and the colour change reducing the waste of solvent and time
• MODULARITY: 3 different kits to equip the System according to the most specific requirements: wall mounted, on stand and on trolley with wheels.
ZIP52 FINISHING
The Advantages
• MAXIMUM FLEXIBILITY OF USE: suitable to feed one or several guns, both manual or automatic (carousels, automatic spraying machines, etc...)
• LOWER MAINTENANCE COSTS thanks to the extreme reliability of all the components and especially to the special “long-life” reinforced diaphragms (tested for more than 5 millions strokes with empty pump, at maximum speed with no breakages)
• WIDE RANGE of models and versions available: aluminium, conductive plastics and stainless steel
• NOISELESS : noise below the average
• BETTER QUALITY/PRICE RATIO: there are for sure cheaper pumps on the market, but no one can compare qualitatively to the ZIP52 finishing. The most qualified competitors offering a product based on both price and quality are more expensive, compared with the same accessories ( ex. triton - graco)
ZIP52 FINISHING
The Market
products:• paints• glues• detachers• oils• latex paints• waxes• enamel• stains• emulsion paints• etc…
ZIP52 FINISHING
Application fields:• woodworking• furniture factories• metallic carpentries• body shops and
industrial vehicles• plastic industries• metal industries• textile industries• tanneries• etc…
technologies:• air atomization• HVLP technology• MicroCoat System• electrostatic systems
Versions
PUMP BODY FINE FLOW CONTROLLER P/N
ALUMINUM Consistal U760.00 (3825547)
INOX AISI 316 inox U765.00 (3826338)
POLYPROPYLENE CONDUCTIVE Consistal U770.00
(3826204)
POLYPROPYLENE CONDUCTIVE inox U771.00
(3826311)
ZIP52 FINISHING
ZIP52 FINISHING BASIC VERSION
(Stand, Trolley or wall brackets not included)
THE SUPPORTSZIP52 FINISHING
Basic version + wall brackets=
wall mounted version
Basic version + stand kit=
version on stand
Basic Version + trolley kit=
version on trolley with wheels
BASIC VERSIONS:
•U760.00 (3825547)
•U765.00 (3826338)
•U770.00 (3826204)
•U771.00 (3826311)
WALL BRACKETS KIT T760.00M
STAND KIT T760.00S
TROLLEY KIT T760.00SR
AccessoriesZIP52 FINISHING
Standard filter for 200lt drums suction pipe9207256 (9207256)
SS filter 1,25M for 200lt drums suction pipe250245 (250245)
SS filter 0,8M for 200lt drums suction pipe250243 (250243)
FFC 150 mesh filter redT500.00B (ND)
FFC 100 mesh filter whiteT500.00A (3825317)
FFC 60 mesh filter BlackT500.00 (3825316)
FINE FLOW CONTROLLER SS with 100mesh filterT0180.00AI (3826173)
FINE FLOW CONTROLLER consistal with 100mesh filterT0180.00A (3825542)
FFC and Filters
trolley kitT760.00SR (3825546)
handle and wheels kitT760.00R (3825551)
stand kitT760.00S (3825548)
wall brackets kitT760.00M (3825964)
SupportsACCESSORIES AND SPARES
ITEMP/N
Accessories & SparesZIP52 FINISHING
service set FFCT9086.00 (3826203)
PTFE diaphragm zip 52 G921.07AC (3823313)
Service set AIR zip 52P4003.00 (3823195)
Service set fluid zip 52 (ss balls and seats)T9080.00 (3824883)
Service sets
double hose low pressure D6x8 low pressure/mt (in sleeve)S127.00A (3825940)
200 lt drums suction system flex. hose2,0 mt D25 (fitting excluded)T4009.00 (3826552)
double hose low pressure D6x8 low pressure/mt 7,5 (in sleeve) 1/4" sspaired fittings S419.00GPI (3826551)
double hose low pressure D6x8 low pressure/mt 7,5 (in sleeve) 1/4" ssfittingsS419.00GI (3826550.)
double hose low pressure D6x8 low pressure/mt 7,5 (in sleeve) 1/4" paired fittings S419.00GP (3825943)
double hose low pressure D6x8 low pressure/mt 7,5 (in sleeve) 1/4"fittingsS419.00G (3825942)
hoses
ITEMP/N
ZIP52 FINISHING
New Zip52 low pulsations
GENERAL INFORMATION• Modified components: motor shaft, air inlet nipple
• Delivery limit 28 l/min
• Reduced pulsations in comparison with the tradizional models
• Lower start pressure
APPLICATIONSSuitable when no high delivery is required and in case you wish to limit the
pulsations to the minimum. For instance: “flexo” applications, feeding for Intellimix,
applications without flow regulator, applications requiring a start pressure value at
the minimum level.
BARE PUMP: AVAILABLE VERSIONS
A = Aluminium; P = Polypropylene; C = Conductive PolypropyleneH = PE UHMW; R = PPS ; D = Acetal ; S = Stainless Steel
Pum
p Bo
dy
Dia
phra
gms
Seat
s
Balls
Fitti
ngs
Con
fig.
Prices
U551. A H R D 1U551. A H R D 7U551. A H S S 1U551. A H S S 7U551. A H S S 8
U551. P T S S 1U551. P T S S 7U551. P H S D 1U551. P H S D 7
U551. C H S D 1U551. C H S D 7
PRICES AS PER THE STANDARD VERSIONS (U550.xxxx)
TECHNICAL FEATURES
Max fluid pressure 7,8 barAir feeding pressure 1-8 barMaxiumum delivery 28 l/minDelivery per cycle 65 ccMax recommended speed 450 cycles/minMax working temperature 85 °CFluid fittings diameter 1/2" BSPAir fittings diameter 1/4” BSPWeight (Alumimium version) 8,9KgWeight (PP version) 8,2 Kg
SprayPack
New Antipulsation Tank Filter- Made of Consistal- Outside/inside filtering: easy cleaning
- Side position: no drops duringcleaning operations
- Recycle valve
Flexible Suction Hose
New Zip52 Perfect Flow- 28 l/min; low pulsations- Perfectly suitable forworking also without fluidpressure regulator or FFC
Air atomization adjustment, complete with gauge
Air feeding adjustment , complete with gauge
AVAILABLE VERSIONS
Cod. U731.00 – Zip52 ECO Perfect FlowComplete with: • Pump Zip52 Perfect Flow Aluminium version (U551.AHSS1)• Antipulsation Tank Filter• Pump stand• Flexible suction hose
Cod. U731.PACK/SP4 – Zip52 ECO Perfect FlowComplete with: • Pump Zip52 Perfect Flow Aluminium version (U551.AHSS1)• Antipulsation Tank Filter• Pump stand• Flexible suction hose• Product hose• Spray gun model SP4 - 1,2mm ø
ZIP52 FINISHING
THANKS FOR THE ATTENTION