ZIXIN CYLINDERS PVTLTD

ZIXIN CYLINDERS PVT LTD

ZIXIN CYLINDERS PVT LTD

ABOUT COMPANY “ZIXIN” stands for Self confidence M/S Zixin cylinders pvt ltd is a registered company under company’s act 1956 on14.12.2015 at Registered survey No's 8/5, 9/1, 9/2B, 10/1 and 10/3 for extent of 10.14 acresat Chervumadhavaram village, G Kondur Mandal, Krishna Dist 521 229. Manufacturingunit constructed in a area of 2 acres out of 13.00 acres. All pre and post establishmentlicenses were obtained from state and central government. The company is SSI unit underregistered with MSME act (Udyog Adhhar). The company installed capacity is 7.2 lacscylinders per annum and capable of producing different cylinder capacities ranging from12kgs to 33kgs.The company is connected to Railway station, Bus stand and State Capital. All state andcentral government offices are within reachable. Our company has come under AP CRDA(Capital Region Development Authority). Managing Director – Mr. Rahul Karanam, holding Masters of Science fromWindsor University , Canada.

ZIXIN CYLINDERS PVT LTD - PROFILE

Name of company ZIXIN CYLINDERS PVT LTD

Top Management Mr. Rahul Karanam, Managing DirectorMr. Vijay Kumar, Director

Factory Address R.S No. 8/5, G.Konduru Mandal, Krishna DistAndhra Pradesh-521229.India

Office Address(for Communication) Flat NO.303, Sohan Constructions, Guntupalli-521241, KrishnaDist.Andhra Pradesh, India.

Year of Establishment with date 14-12- 2015

G S T No.

37AAACZ9041P1ZM

ISO-9001-2015 License no. QM/L-6007609 valid upto 13-09-2020

Imports Exports Code 0916902528

EEPC-RCMC Regn No. 401/M27854 valid up to 31-03-19

FTAPCCI membership No. 9241 valid upto 31-03-2019

Pollution Control Board Permission No Kr-527/APPCB/ZO-VJA/CFO/W&A

ZIXIN CYLINDERS PVT LTD

CUSTOMERS

Indian Oil Corporation

ZIXIN CYLINDERS PVT LTD

MANUFACTURING PROCESS

MATERIAL RECEIPT D COILING AND CIRCLECUTTING DEEP DRAW TRIMMING

DEGREASINGBUNG HOLE

FOOTRING WELDING

BUNG WELDING

ASSEMBLY

C WELDING BODY WELDING NO. PUNCHING FURNACE

HSTGRIT BLASTINGMETALLIZINGPAINTING

INTERNAL CLEANING VALVE FIXING TARE WEIGHT ANDPUNCHING STENCILING

AIR FILLINGPNEUMATIC TESTINGAIR REMOVINGOFFER FOR BIS

DISPATCH

Note : Inspection to be followed as per latest standards IS 3196 Part 1, Part 3 and STI for new cylinders.

ZIXIN CYLINDERS PVT LTD

COMPANY POLICY

“Zixin” is committed to providing Superior quality products andservices that meet applicable regulatory, statutory and customerrequirements by adhering to a Quality Management system thatbenefits our customers, employees and suppliers. To meet our commitment, ➢ Value our customers through open communications, timely

responses and continual improvements. ➢ Appreciate, environment of trust, integrity, challenge and

reward that attracts to retains the best employees in allpositions in the company.

ZIXIN CYLINDERS PVT LTD

MANUFACTURING STANDARDS FOLLOWED

Sl No. STANDARD NO. STANDARD DESCRIPTION

1 IS 3196 (PART 1) : 2013 LPG cylinder specifications

2 IS 3196 (PART 3) : 2012 Welded low carbon steel cylinders exceeding 5 ltrs water capacity - Method of tests

3 STI 3196 (PART 1) 2014 New cylinder testing and Inspections

4 IS 6240 : 2008 Raw Material – Hot rolled steel manufactured for LPG cylinders

5 IS 1079 : 2009 “O” grade steel standards

6 IS 9121 : 2005 L1, L 9 & L 8 specifications

7 IS 2062 : 2011 Steel for general structural purpose

8 IS 1608 : 2005 Metallic Material – Tensile testing

9 IS 8737 : 1995 Valve fitting

10 IS 2074 : 1992 Red oxide zinc chromate primer

11 IS 2932 : 2003 Enamel Paint

12 IS 12447 : 1988 Zinc wire for sprayed zinc coating

13 IS 2 : 1960 Rules for rounding off numerical values

14 IS 6789 : 2003 Torque tool requirements

15 IS 9954 : 1981 Pictorial surface preparation standard

16 IS 1239 (PART 2) : 1992 Steel tubes, tubular

17 IS 55 :2007 Color coding

ZIXIN CYLINDERS PVT LTD

TESTING FACILITIES

Sl No. TESTING REMARK

1 Tensile testing, Bend test, Yield test and Elongation Test

2 Hydro static testing

3 Pneumatic Testing

4 Burst test

5 Cyclic Test

6 Torque test

7 Drop Test

8 Lift Test

9 Weld Penetration test

Testing Details

ZIXIN CYLINDERS PVT LTD

ZIXIN CYLINDERS PVT LTD