Embed Size (px)
Citation preview
onlineUPSZP120N
•LOCALAREANETWORKS(LAN)
•SERVERS
•DATACENTERS
•INTERNETCENTERS(ISP/ASP/POP)
•INDUSTRIALPLCS
•EMERGENCYDEVICES(LIGHTS,ALARM)
•ELECTROMEDICALDEVICES
•TELECOMMUNICATIONDEVICES
•INDUSTRIALAPPLICATION
1,2,3,6,10,20kVA
COMMON FEATURES:
G-TECisproudtointroducetheupgradedsuperiorZP120NUPSthatcandeliverclean,safeandregulatedpowersupplytoprotectyourcriticalmissionequipment,soastosafeguardyourvaluableequipmentandcriticaldatafrom
anyabnormalpowerdisturbances,suchassurges,blackoutsandlightningstrikes.ZP120N UPSpowercapacityisavailablefrom 1kVA to 3kVA 1/1(1/1standsforsinglephaseinputandsinglephaseoutput);from 6kVA to 10kVA 1/1andfrom 10kVA to 20kVA 3/1 (3/1standsforthreephaseinputandsinglephaseoutput).
ZP120N
•DigitalSignalProcessor(DSP)Control
•ColdStartFunction
•Strongestperformance
•HighPowerDensity
•FlexibleSettings
• Internalcomponentsdesignedforstressing environment
•Highestefficiencywithlowheatdissipation
•LongruntimeModelwithoptionalbatteryanddedicated
supercharger(KSVersion)
series
1-3kVA 1/1 6-10kVA 1/1 10-20kVA 1/1-3/1
1kVA to 3kVA 1/1
STRONGEST PERFORMANCE•DSPtechnologyfullycontrolled•Selfmonitoringandfaultdiagnosis•Dualinternalcommunicationsbus•Lowestoutputvoltagedistortion
HiGH POwER DENSiTy•Wideinputvoltagerange•0.8outputpowerfactor• Inputpowerfactorcorrectionand
lowestcurrentdistortion
FlExiblE SETTiNGS•SelectableconfigurationviaLCD: online, eco-mode, frequency/voltage convertermode(CVCF)
•EPOconnectorforremoteemergencypoweroff•Standardexternalbatteryconnector
•Simplifiedinstallation
• OperatiOnMOde• MiMic• SettingS• StatuS/alarMcOde
• inputMeaSureS• Batterycapacity• OutputMeaSureS
MENU:
USBEPO
Breaker
AC Input
Fan
Ext Battery
AC Output
AC Output
RJ45
Intelligent Slot
6kVA to 10kVA 1/1
10kVA to 20kVA 3/1
STRONGEST PERFORMANCE•DSPtechnologyfullycontrolled
•LCDdisplaymultilanguage
•Realtimeeventlogs
•Dualinternalcommunicationsbus
•Reducedaudiblenoise
HiGH POwER DENSiTy•0,9outputpowerfactor
•Minimumacceptableinputvoltage110Vac
FlExiblE SETTiNGS•SelectableconfigurationviaLCD:online,parallel,
eco-mode and frequency/voltage converter
mode(CVCF)
•Parallelableupto4unitswithoptionalparallelkit
•Standardmechanicalmaintenancebypass
•Optionalinternalinsulationtransformer
•EPOconnectorforremoteemergencypoweroff
•Standardexternalbatteryconnector
•Back-feedprotection
The10-20kVAthreephaseinputandsinglephaseoutputisanupgradeoftheZP120N-10K-11.Theyhavethesametechnicalperformancewiththefollowingadvantages:
• Inputvoltageautosensing(3phor1ph)
•Largecabinetsuitableformoreinternalbatterystrings
•Dualinputswithseparatebypasslineasstandard
• inputinfOrMatiOn
• OperatingStatuS
• BatteryinfOrMatiOn
• lOadinfOrMatiOn
• OutputinfOrMatiOn
MENU:EPO
Dry Contact
USB
Fan
Intelligent Slot
Parallel Port
Fan
Input Breaker
Fan
EPO
RS232
Back FeedConnector
IntelligentSlot
InputBreaker
NeutralSwitch Cover
Terminal Blocks Cover
USB
USBDry ContactIntelligent SlotParallel Port
Parallel Port (Optional)
Maintenance Switch
Terminal BlocksCover
Maintenance Switch
EPO
ZP120N-10K-11 ZP120N-20K
CommunicationandPowerManagementSolutionsWinPowerCDispackedwithUPS,andcanalsobedownloadedfromtheinternet.Ithasthefunctiontoremote
monitorandcontrolUPS,warningnotifications throughbroadcastandmobilephone,multi-shutdownPCs,and
scheduleUPSself-test.Thisuniquesoftwareprovidescompletepowerprotectionforcomputersystemduringpo-
werfailure.ThesoftwaresupportslotsofO/SincludingWindowsfamily,Linux,SunSolaris7/8/9,FreeBSD,IBMAix
4.3x,5.1x,andHP-UX11.x.Morethanthat,toofferincreasedbenefitsforourcustomers,wehavealsoreleased
USBversionMACversionontheinternet.
•PowerflowdisplayformonitoringUPSstatus•Scheduledsystemshutdown/restart•ScheduledUPStest•WarningnotificationviaE-mail/Pager•WarningnotificationviaBroadcast•Passwordsecurityprotection•RemoteMonitor/ControlviaLAN
•Multi-languageversions:English,Germanic,French,Italian,Spanish,PortugueseandChinese•SelectableUserInterface(Background)•UPSParametersetting•Recordlogsforanalysis•SNMPNetworkcardallowsmanagementofUPSacrossLANusinganyofthemainnetworkcommunicationprotocols–TCP/IPandnetworkinterfaceviaSNMP.
INPUT SWITCHBOARD
OUTPUT SWITCHBOARD
LOAD LOAD LOAD LOAD
ZP120N 6kVA to 20kVA UPS with optional parallel kit fittedin parallel configuration, can meet most demanding powerrequirement.Increasepoweravailabilityandflexibility.
Parallel Redundancy feature provides economic power solutionforsystemintegration.Furthermore,parallelredundancyfeatureequallysharestheloadtomaximizeUPSperformance,andmoresecureUPScontinuousoperation.
RELAYCARD/AS400SNMPCARD MODBUSINTERFACE
iNTERFACE OPTiON:
ETH
ERN
ET N
ETW
ORK
POWER SUPPLY
Technical SpecificationModel ZP120N-1K ZP120N-1K-KS* ZP120N-2K ZP120N-2K-KS* ZP120N-3K ZP120N-3K-KS*
Power Rating 1000VA/800W 2000VA/1600W 3000VA/2400W INPUT
Rated Voltage 220Vac/230Vac/240VacVoltage Tolerance 110Vac-300Vac
Voltage Range 110Vac-300Vac (± 3 %) at 50% load165Vac-300Vac (± 3 %) at 75% load
176Vac-300Vac (± 3 %) at 100% loadFrequency Range 50Hz or 60Hz auto sensing, 45-55Hz / 54-66Hz
THDi % <5% with full loadPower Factor ≥0.99 (I/P:220V, FULL RCD LOAD)
Input connection IEC 320, C13 10A/ 250V power cord
IEC 320, C19 16A/ 250V power cord Connectors
OUTPUT Rated voltage 200VAC**/208VAC**/220VAC/230VAC/240VACVoltage regulation ± 2 %Rated Frequency (free running) 50/60 Hz ± 0.2 HzCrest Ratio 3:1Harmonic distortion < 3% THD, linear loadOutput Waveform Pure SinewaveOverload Capability 105%-110%: 1 min; 110%-125%: 30 sec ; 125%-150%: 10 Sec; >150%: 1 secPower factor 0,8
Output connection 3 x IEC320, C13 10A/ 250V output receptacles
4 x IEC320, C13 10A/ 250V output receptacles
4 x IEC320, C13 10A/ 250V output receptacles
BATTERIES
Type Sealed lead acid battery, maintenance freeRating 12V/7Ah Depend on
external battery
12V/7Ah Depend on external battery
12V/7Ah Depend on external battero
Numbers of batteries 3 8 8Back-up Time (typical load) >10 minutes >18 minutes >10 minutesRecharge time < 5 hours
GENERAL CHARACTERISTICS
Transfer Time 0 msEfficiency (online mode / Eco-mode) 88% / up to 94%
LCD Mimic Panel Status & Information
Information: Battery Status / UPS status & alarm / Load statusMeasurement: Battery voltage & current, Input / Output voltage, current & frequency
Control 4 Buttons: UPS ON / UPS OFF / SELECT / ENTER for selection of UPS voltage, Bypass (enable or disable) CVCF mode
Dimensions (mm) L x D x H 145x400x220 192x460x347
Net Weight (kg) 13 7 31 13 31 13
Operating Temperature 0°C ~ 45 °C
Noise Level (@ 1m) 50dB
Humidity 0-95% (no condensing)
Interface standard via Smart USB Support Windows family; Linux; Sun Solaris; IBM AIX; Compaq True 64; SGI IRIX; Free BSB; HP-UX; MAC
Interface for Intelligent Slot SNMP / RS485 / AS400 Card/ ModBus
Compliance IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 62040-1-1, IEC 62040-2, IEC 60950-1
ZP120N 1kVA to 3kVA
* ks version are provided with battery extra charger** Derate to 90% with 208Vac output voltage. Derate to 80% with 200Vac output voltage, derate to 60% automatically when at converter modeNote: product specifications are subject to change without further notice.
Technical SpecificationModel ZP120N-6K ZP120N-6K-KS* ZP120N-10K-11 ZP120N -10K-11-KS*Power Rating 6000VA/5400W 10000VA/9000W
INPUT Rated Voltage 220Vac/230Vac/240VacVoltage Tolerance 110Vac-276Vac
Voltage Range 110Vac-276Vac (± 3 %) at 50% load
176Vac-276Vac (± 3 %) at 100% loadFrequency Range 45-55Hz / 54-66HzTHDi % <5% with full loadPower Factor ≥0.99 (I/P:220V, FULL RCD LOAD)
OUTPUT Rated voltage 208Vac**/220Vac/230Vac/240VacVoltage regulation ± 1 %Rated Frequency AC Mode 50/60 Hz ± 0.05 HzCrest Ratio 3:1Harmonic distortion < 0,2% THD, linear load Output Waveform Pure Sinewave
Overload Capability 105%-125%: 10 mins ; 125%-150%: 1 min ; 150%-170%: 10 sec ; >170%: 100 ms
Parallel (with optional parallel kit) Up to 4Power factor 0,9
BATTERY Type Sealed lead acid battery, maintenance freeRating 12V/7Ah
***Depend on external battery
12V/9Ah***Depend on
external batteryNumbers of batteries 20 20Back-up Time (typical load) > 10 minutes >10 minutesRecharge time < 5 hours
GENERAL CHARACTERISTICS Transfer Time (Inverter to bypass) 0 msEfficiency (online mode / Eco-mode) >92% / >96%
LCD Mimic Panel Status & Information
Information: Battery Status / UPS status & alarm / Load statusMeasurement: Battery voltage & current, Input / Output voltage,
current & frequency
Control 4 Buttons: UPS ON / UPS OFF / SELECT / ENTER for selection of UPS voltage, Bypass (enable or disable) CVCF mode
Dimensions (mm) LxDxH 260x560x708Net Weight (kg) 86 34 92 37Operating Temperature 0°C ~ 45 °CNoise Level (@ 1m) < 50dBHumidity 0-95% (no condensing)
Interface standard via Smart USB Support Windows family; Linux; Sun Solaris; IBM AIX; Compaq True 64; SGI IRIX; Free BSB; HP-UX; MAC
Interface for Intelligent Slot SNMP / RS485 / AS400 Card/ USB / ModBus
Compliance IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 62040-1-1, IEC 62040-2, IEC 60950-1, ETS 300019-2-2
ZP120N 6kVA to 10kVA
* ks version are provided with battery extra charger** Derate to 90% with 208Vac output voltage, derate to 60% automatically when at converter mode *** Optional external battery cabinet with or without battery is available upon requestNote: product specifications are subject to change without further notice.
ZP120N 10kVA to 20kVA
Technical SpecificationModel ZP120N-10K-31 ZP120N-10K-31-KS* ZP120N-20K-31 ZP120N-20K-31-KS*Power Rating 10000VA/9000W 20000VA/18000W
INPUT Rated voltage 220VAC/230VAC/240VAC 1ph or 380/400/415 3ph (autosensing)
1 phase input voltage range110Vac-276Vac (± 3%) at 50% load
176Vac-276Vac (± 3%) at 100% load
3 phase input voltage range190Vac-478Vac (± 3%) at 50% load322Vac-478Vac (± 3%) at 100% load
Frequency Range 45-55Hz / 54-66HzTHDi % <5% with full loadPower Factor ≥0.99 (FULL LOAD)
OUTPUT Rated voltage 208VAC**/220VAC/230VAC/240VACVoltage regulation ± 1 %Rated Frequency (free running) 50/60 Hz ± 0.05 HzCrest Ratio 3:1Harmonic distortion ≤ 2% THD, linear load Output Waveform Pure SinewaveOverload Capability 100%-110%: 5 min; 110%-130%: 1 min ; 130%-150%: 10 sec; >150%: 2 secParallel (with optional parallel kit) Up to 4Power factor 0,9
BATTERY Type Sealed lead acid battery, maintenance freeRating 12V/9Ah
***Depend on external battery
12V/9Ah***Depend on
external batteryNumbers of batteries in-built 24 + 24(optional) 24 + 24
Back-up Time (typical load) > 12 minutes + 12 minutes(optional) > 12 minutes
Recharge time < 5 hours GENERAL CHARACTERISTICS
Transfer Time (Inverter to bypass) 0 msEfficiency (online mode / Eco-mode) >93% / up to 97%
Dimensions (mm) LxDxH 350x650x890Net Weight (kg) 127 37 188 39Operating Temperature 0°C ~ 45 °CNoise Level (@ 1m) 55dBHumidity 0-95% (no condensing)
Interface standard via Smart USB Support Windows family; Linux; Sun Solaris; IBM AIX; Compaq True 64; SGI IRIX; Free BSB; HP-UX; MAC
Interface for Intelligent Slot SNMP / RS485 / AS400 Card/ USB / ModBus
Compliance IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,IEC 62040-1-1, IEC 62040-2, IEC 60950-1
* ks version are provided with battery extra charger ** Derate to 90% with 208Vac output voltage*** Optional external battery cabinet with or without battery is available upon request Note: product specifications are subject to change without further notice.
G-Tec Companies are also present worldwide with Business Partners in several countries.
G-Tec Asia Pacific Pte Ltd
60 Kaki Bukit Place, #03-05, Eunos Techpark II, Singapore 415979
Tel. +65 6555.5014 - Fax +65 6555.4105
G-Tec Europe srl
Strada Marosticana, 81/13 - 36031 Povolaro (VI), Italia
Tel. +39 0444.361321 - Fax +39 0444.365191
www.gtec-power.com
Rev.30.12.2012
