Komponenten aus Edelstahl & GlasIhr zuverlässiger Partner für Systemkomponenten
a s e p t e CHcomponents for hygienic processing
Wir liefern aus Edelstahl
• Rohre und Rohrformstücke• Sterilverbindungen• Ventile und Kugelhähne• Sonderkonstruktionen
in den (Innen)Oberfl ächenqualitäten
HQ-line©
made for High End SolutionsRa ≤ 0,25-0,4µm (1.4435/316L - BN2) STERI-line©
made for PharmaRa ≤ 0,5-0,8µm (1.4435/316L - BN2)
MEDI-line©
made for FoodRa ≤ 0,8/1,6µm (1.4404/316L)
sowie auf Anfrage in den Sonderwerkstoffen
• 1.4539 • Hastelloy C4/C22• Titan
+
asepteCH AG Industriestrasse 130 CH-4600 Olten Fon +41 (0) 62 286 6060 Fax +41 (0) 62 286 6066 [email protected]
Ihre Vorteile
Hohe Prozess- und Produktsicherheit für Ihre Anlagen durch QHD-zertifi zierte Komponenten, Einhaltung der GMP-/FDA-Kriterien, innovative Problemlösungen und Lagerhaltung in der Schweiz.
www.aseptech.ch
a s e p t e CHcomponents for hygienic processing
Wir liefern aus Glas Systemkomponenten wie
• Rohre und Rohrformstücke
• Gefäße und Kolonnen
• Ventile und Filter
aus dem Werkstoff
Borosilikatglas 3.3
für alle gängigen Verbindungssysteme
Flansche nach Schott, QVF, Büchi
und komplette Prozesssysteme für
• Destillation
• Reaktion
• Wärmeübertragung
+Komponenten aus Edelstahl & GlasIhr zuverlässiger Partner für Systemkomponenten
asepteCH AG Industriestrasse 130 CH-4600 Olten Fon +41 (0) 62 286 6060 Fax +41 (0) 62 286 6066 [email protected]
www.aseptech.ch
Ihre Vorteile
Hohe Prozess- und Produktsicherheit für Ihre Anlagen durch QHD-zertifi zierte Komponenten, Einhaltung der GMP-/FDA-Kriterien, innovative Problemlösungen und Lagerhaltung in der Schweiz.
seal qualities | Dichtungsqualitäten
FDA-konform FDA approved
Werkstoff / Farbe HärteTemperatur-
beständigkeit Anwendungsbereich Bemerkungen
APTK/EPDM (Dutral) grün, grau, schwarz
70° - 80° ± 5°Shore A - 30°C bis + 150°C
Heißwasser, Dampf (bis 180°C), elektrisch isolierend, extrem niedrige Temperaturen
Ozon beständig, Lebensmittel- und Pharmaindustrie
EPDM schwarz
70° - 75° ± 5°Shore A - 40°C bis + 150°C Heißwasser, Dampf (bis 180°C)
Lebensmittel- und Pharmaindustrie
FKM (Viton)schwarz
70° - 80° ± 5°Shore A - 40°C bis + 200°C
ausgezeichnete Beständigkeit bei aromat-ischen Lösungsmitteln, Chemikalien, etc., bei hohen Temperaturen
Lösungsmittel, Chemie, Lebensmittelindustrie
H-NBR 70° - 80° ± 5°
Shore A + 20°C bis + 140°CHeißwasser, Dampf, tierische Öle und Fette
Lebensmittel- und Pharmaindustrie
MFQ (Fluor-Silikon)rot, blau, transparent
70° - 80° ± 5°Shore A - 50°C bis + 150°C
besondere Beständigkeit gegenüber Aromaten, Ölen, etc.,bei tiefenTemperaturen Lebensmittelindustrie
MVQ (Silikon-Kautschuk) milchig weiß, transparent
70° - 80° ± 5°Shore A - 40°C bis + 200°C
extreme Beständigkeit gegen hohe und tiefe Temperaturen, physiologisch einwandfrei, nur statisch verwendbar, geringe Festigkeit
empfehlenswert bei Lebensmittel- und Pharmaindustrie
NBR (Perbunan)blau
70° - 80° ± 5°Shore A - 25°C bis + 90°C
Heißwasser, Dampf, Druckluft, Benzin, Öle, schwache Säuren, Alkalien Lebensmittelindustrie
PTFE (Tefl on)weiß
51° - 60° ± 5°Shore D - 200°C bis + 260°C
lebensmittelecht, extrem hohe Temperaturen, beste chemische Beständigkeit, gute Gleiteigenschaften
kaltfl ießend, Lebensmittel- und Pharmaindustrie
Viton/FEP- ummanteltschwarz / transparent
70° - 80° ± 5°Shore A - 20°C bis + 200°C siehe PTFE
vergleichbar mit PTFE, jedoch nicht kaltfl ießend
material / colour hardnesstemperature resistance fi eld of application remarks
APTK/EPDM (dutral) green, grey, black
70° - 80° ± 5°Shore A - 30°C thru + 150°C
hot water, steam (thru 180°C), electrically insulating, extremely low temperatures
ozone resistant, food- and pharmaceutical industry
EPDMblack
70° -75 ° ± 5°Shore A - 40°C thru + 150°C hot water, steam (thru 180°C)
food- and pharmaceutical industry
FKM (Viton)black
70° - 80° ± 5°Shore A - 40°C thru + 200°C
excellent resistance against aromatic solvent, chemicals, etc., at high temperatures
solvent, chemical- and food industry
H-NBR 70° - 80° ± 5°
Shore A + 20°C thru + 140°C hot water, steam, animal oils and fatfood- and pharmaceutical industry
MFQ (fl uorine silicone) red, blue or transparent
70° - 80° ± 5°Shore A - 50°C thru + 150°C
special resistance against aromatic hydrocarbon compounds, oils, etc., at low temperatures food industry
MVQ (silicone-rubber) milky white, transparent
70° - 80° ± 5°Shore A - 40°C thru + 200°C
extreme resistance against high and low temperatures, physiologically fl owless, only statically usable, low strength
recommendable for food- and pharmaceutical industry
NBR (Perbunan) blue
70° - 80° ± 5°Shore A - 25°C thru + 90°C
hot water, steam, compressed air, petrol, oils, weak acids, alkalis food industry
PTFE (Tefl on)white
51° - 60° ± 5°Shore D - 200°C thru + 260°C
food proof, extremly high temperatures, best chemical resistance, good gliding quality
creeping, food- and pharmaceutical industry
Viton/FEP coatedblack / transparent
70° - 80° ± 5°Shore A - 20°C thru + 200°C refer to PTFE
comparable with PTFE,but not creeping
Standard-Werkstoff
1.4435/316L
Normen
1.4435/1.4404 (316L)
DIN 11850
DIN EN ISO 1127
ASME-BPE 1997 (2002)
weitere Werkstoffe
- 1.4539
- HC 22/HC 4, etc.
Elastomere (FDA-konform)
- EPDM
weitere Werkstoffe
- PTFE
- Silikon
- Viton (FEP- ummantelt)
Rauheitswerte der Innenoberfl äche
- Ra ≤ 0,8/0,8µm bis Ra ≤ 0,25µm (1.4435)
- Ra ≤ 0,8/1,6µm (1.4404)
∂-Ferritgehalt
mit verringertem Ferritgehalt
nach Basler Norm BN2 (max. 0,5%)
Oberfl ächenqualität
innen und außen metallblank oder gebeizt
mögliche Veredelungen
- innen elektropoliert
- innen geschliffen mit Korn 400
- außen geschliffen mit Korn 400
Diese Veredelungen sind durch Lagerhaltung und
hauseigene Fertigung kurzfristig lieferbar.
Ausführungen | types
standard material
1.4435/316L
standards
1.4435/1.4404 (316L)
DIN 11850
DIN EN ISO 1127
ASME-BPE 1997 (2002)
additional materials
- 1.4539
- HC 22/HC 4, etc.
elastomere (FDA approved)
- EPDM
additional materials
- PTFE
- silicone
- Viton (FEP coated)
internal surface-roughness
- Ra ≤ 0,8/0,8µm thru Ra ≤ 0,25µm (1.4435)
- Ra ≤ 0,8/1,6µm (1.4404)
∂-Ferrit concentration
with controlled ferritic concentration according
to regulation Basel BN2 (max. 0,5%)
surface fi nish
inside and outside bright annealed or pickled
possible refi nements
- inside electropolished
- inside ground with grain 400
- outside ground with grain 400
Due to our stock capacity and company owned
production, these refi nements can be delivered
at short notice.
standard sheet | Normblatt
Dieses Foto wurde uns freundlicherweise von Roche Diagnostics GmbH zur Verfügung gestellt.
DINDIN 11850
ISODIN EN ISO 1127
OD-tubingASME-BPE 1997 (2002)
DN A B S DN A B S DN A B S
6 8 6 1,0 8 13,5 10,3 1,6 ¼” 6,35 4,53 0,91
8 10 8 1,0 10 17,2 14,0 1,6 ³⁄8” 9,53 7,71 0,91
10 12 10 1,0 15 21,3 18,1 1,6 ½” 12,7 9,4 1,65
10 13 10 1,5 20 26,9 23,7 1,6 ¾” 19,05 15,75 1,65
15 19 16 1,5 25 33,7 29,7 2,0 1” 25,4 22,1 1,65
20 23 20 1,5 32 42,4 38,4 2,0 1½” 38,1 34,8 1,65
25 29 26 1,5 40 48,3 44,3 2,0 2” 50,8 47,5 1,65
32 35 32 1,5 50 60,3 56,3 2,0 2½” 63,5 60,2 1,65
40 41 38 1,5 65 76,1 72,1 2,0 3” 76,2 72,9 1,65
50 53 50 1,5 80 88,9 84,3 2,3 4” 101,6 97,38 2,11
65 70 66 2,0 100 114,3 109,7 2,3 6” 152,4 146,96 2,77
80 85 81 2,0 125 139,7 134,5 2,6
100 104 100 2,0 150 168,3 163,1 2,6
125 129 125 2,0
150 154 150 2,0
Standard-Nennweitenstandard dimensions
DIN DN006 - DN100ISO DN008 - DN100ASME-BPE DN ½” - DN 4”
DN Abmessung dimensionA Rohr-Außendurchmesser outer tube diameterB Rohr-Innendurchmesser inner tube diameterS Wandstärke wall thickness
Werkstoffe | materials
DIN 1.4301 1.4307 1.4404 1.4435 1.4571 1.4539
AISI 304 304L 316L 316L 316Ti 904L
Stahlsortesteel grade
X5CRN1810
X5NRI1911
X2CRNIMO 17122
X2CRNIMO 18133
X6CRNIMOTI 17122
X1NICRMOCU 25205
C ≤ 0,07% ≤ 0,03% ≤ 0,03% ≤ 0,03% ≤ 0,05% ≤ 0,02%
Si ≤ 1% ≤ 1% ≤ 1% ≤ 1% ≤ 1% ≤ 0,7%
CR 17-19,5 18-20 16,5-18,5 17-19 16,5-18,5 19-21
MO ----- ----- 2-2,5 2,5-3,0 2-2,5 4-5
NR 8-10,5 10-12,5 10-13 12,5-15 10-13,5 24-26
P 0,045 0,045 0,045 0,045 0,045 0,030
S 0,015-0,030 0,015-0,030 0,015-0,030 0,015-0,030 0,015-0,030 ≤ 0,01
Sonstigeothers N ≤ 0,11 N ≤ 0,11 N ≤ 0,11 N ≤ 0,11 Ti 5 Cu 1,2-2,0 N ≤ 0,1
Technische Änderungen und Druckfehler, sowie alle Rechte vorbehalten.
Subject to alteration and misprint, all rights are reserved.
HQ-line (HQ)Metallblank | bright annealed
Ra ≤ 0,4µm (1.4435)
HQ-line (HQ+)elektrochemisch poliert | electrochemically polished
Ra ≤ 0,25µm (1.4435)
MEDI-lineMetallblank | bright annealed
Ra ≤ 0,8/1,6µm (1.4404)
STERI-lineMetallblank | bright annealed
Ra ≤ 0,8µm (1.4435)
elektrochemisch poliert | electrochemically polished
Ra ≤ 0,5-0,6µm (1.4435)
contents | Inhaltsverzeichnis
2. Rohrverbindungen | fi ttings
2.1 Steril-Verschraubung | aseptic union - STERI-Connect©
2.2 Steril-Verschraubung | aseptic union - DIN 11864-1-A-N
2.3 Steril-Flanschverbindung | aseptic fl ange connection - STERI-Connect©
2.4 Steril-Flanschverbindung | aseptic fl ange connection - DIN 11864-2-A-N
2.5 Steril-Clampverbindung | aseptic clamp connection - STERI-Connect©
2.6 Steril-Clampverbindung | aseptic clamp connection - DIN 11864-3-A-N
2.7 Clampverbindung | clamp connection - (ähnlich | similiar) DIN 32676
2.8 Zubehör (Dichtringe/Clampklammer, etc.) | accessories (seals/clamp ring, etc.)
2.9 S-Nippel -orbitalschweißfähig- | nipple -prepared for orbital welding-
2.10 S-Muffe -orbitalschweißfähig- | sleeve -prepared for orbital welding-
2.11 STERI-Cap© -orbitalschweißfähig- | -prepared for orbital welding-
3. Reduzierungen | reducers
3.1 STERI-Red© K (konzentrisch | concentric) - DIN 11865-RK
3.2 STERI-Red© E (exzentrisch | eccentric) - DIN 11865-RE
3.3 Red-Stück K (konzentrisch | concentric) - DIN 11852-RK
3.4 Red-Stück E (exzentrisch | eccentric) - DIN 11852-RE
4. Bogen | bends
4.1 STERI-Bo© 90° - DIN 11865-BL-90°
4.2 STERI-Bo© 45° - DIN 11865-BL-45°
4.3 MEDI-Bo© 90°/45° - DIN 11852 BL - 90°/45°, IIa
1. Rohre | tubes
1.1 STERI-Tube© - DIN 11866
1.2 MEDI-Tube© - DIN 17457 (EN 10217-7)
Inhaltsverzeichnis | contents
5. T-Stücke und Kreuzstücke | tees and cross pieces
5.1 STERI-T© egal | equal - DIN 11865-T
5.2 STERI-T© kurz | short - DIN 11865-TK
5.3 STERI-T© reduziert | reduced - DIN 11865-T
5.4 STERI-T© reduziert und kurz | reduced and short - DIN 11865-TK
5.5 MEDI-T© egal/kurz | equal/short - DIN 11852-T/TK
5.6 STERI-Cross© egal | equal
5.7 STERI-Cross© kurz | short
6. Schaugläser | inspection glasses
6.1 Durchgangsschauglas | straight way sight glass
6.2 Bullaugenschauglas | sight glass
7. Ventile | valves
7.1 Ecküberströmventil | overfl ow valve
7.2 Bodensitzventil | bottom seat valve
7.3 Tellerrückschlagventil | non return disk valve
7.4 Probenahmeventil | sampling valve
8. Kugelhähne | ball valves
8.1 3-teiliger Kugelhahn | tripartite ball valve
9. Montagezubehör | assembly accessories
9.1 Rohrschelle ohne Schaft | pipe clamp without shank
9.2 Rohrschelle mit Schweißschaft | pipe clamp with shank
9.3 Rohrschelle mit Gewindeschaft | pipe clamp with screwed shank
unsere Liefer- und Zahlungsbedingungen können Sie unter www.kiesel-steriltechnik.de einsehen, bzw. werden wir Ihnen gerne auf Anfrage zusenden
our terms of delivery/payment can be noticed under www.kiesel-steriltechnik.de, or will be sent on demand
1. Rohre | tubes
1.1 STERI-Tube© - DIN 11866
1.2 MEDI-Tube© - DIN 17457 (EN 10217-7)
tubes | Rohre 1.
STERI-Tube©1.1
Legende
A Rohr-AußendurchmesserB Rohr-Innendurchmesser
key
A outer tube diameterB inner tube diameter
Rohre für die Reintechnik - DIN 11866,geschweißt nach DIN 17457 Tab. 6 K2G (EN 10217-7) /nahtlos nach DIN 17458 PK1/2(Anforderung DIN 17457 PK2 / ASTM A269/270)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Abmessungen
DIN 11850 (A)DIN EN ISO 1127 (B)ASME-BPE 1997 (2002) (C)
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
Toleranzen
DIN 11866 / DIN EN ISO 1127
Verpackung
Rohrenden mit Kunststoffkappen verschlossen,auf Wunsch einzeln in Folie verpackt.
Werkstoff (DIN) 1.4435
tubes for the aseptic technology - DIN 11866,welded acc. to DIN 17457 tab. 6 K2G (EN 10217-7) /seamless according to DIN 17458 tc1/2(requirement DIN 17457 tc2 / ASTM A269/270)
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 dimensions
DIN 11850 (A)DIN EN ISO 1127 (B)ASME-BPE 1997 (2002) (C) labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
tolerances
DIN 11866 / DIN EN ISO 1127
packaging
Tube ends covered with plastic caps, on demand wrapped separately in plastic sheet.
material (AISI)
316L
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11866
STERI-Tube©
DINRohr-Øtube-Ø A B kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./MBArt.-Nr.
e-pol./K400item No
DN006 8 x 1,0 8 6 0,175 700619 701105 704404 704405
DN008 10 x 1,0 10 8 0,225 700620 700632 704402 704403
DN010 12 x 1,0 12 10 0,275 700621 700633 700597 703884
DN010 13 x 1,5 13 10 0,430 704063 704064 704406 700609
DN015 19 x 1,5 19 16 0,625 700622 700634 700598 703881
DN020 23 x 1,5 23 20 0,805 700623 700635 700599 704081
DN025 29 x 1,5 29 26 1,035 700624 700636 700600 703555
DN032 35 x 1,5 35 32 1,260 700625 700637 700601 703556
DN040 41 x 1,5 41 38 1,485 700626 700638 700602 703879
DN050 53 x 1,5 53 50 1,935 700627 700639 700603 704202
DN065 70 x 2,0 70 66 3,405 700628 700640 700604 700616
DN080 85 x 2,0 85 81 4,155 700629 700641 700605 704203
DN100 104 x 2,0 104 100 5,110 700630 700642 700606 700618
ISORohr-Øtube-Ø A B kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./MBArt.-Nr.
e-pol./K400item No
DN008 13,5 x 1,6 13,5 10,3 0,477 701115 701113 701114 701112
DN010 17,2 x 1,6 17,2 14,0 0,625 701075 701073 701074 701072
DN015 21,3 x 1,6 21,3 18,1 0,789 701083 701081 701082 701080
DN020 26,9 x 1,6 26,9 23,7 1,014 701087 701085 701086 701084
DN025 33,7 x 2,0 33,7 29,7 1,585 701091 701089 701090 701088
DN032 42,4 x 2,0 42,4 38,4 2,025 701095 701093 701094 701092
DN040 48,3 x 2,0 48,3 44,3 2,320 701099 701097 701098 701096
DN050 60,3 x 2,0 60,3 56,3 2,920 701103 701101 701102 701100
DN065 76,1 x 2,0 76,1 72,1 3,710 701111 701109 701110 701108
DN080 88,9 x 2,3 88,9 84,3 4,985 701119 701117 701118 701116
DN100 114,3 x 2,3 114,3 109,7 6,610 701079 701077 701078 701076
ASME-BPE
Rohr-Øtube-Ø A B kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./MBArt.-Nr.
e-pol./K400item No
DN ¼” 9,53 x 0,91 9,53 7,71 0,196 701024 701025 701026 701027
DN ½” 12,7 x 1,65 12,7 9,4 0,455 701028 701029 701030 701031
DN ¾” 19,05 x 1,65 19,05 15,75 0,720 701032 701033 701034 701035
DN 1” 25,4 x 1,65 25,4 22,1 0,980 701036 701037 701038 701039
DN 1½” 38,1 x 1,65 38,1 34,8 1,505 701040 701041 701042 701043
DN 2” 50,8 x 1,65 50,8 47,5 2,030 701044 701045 701046 701047
DN 2½” 63,5 x 1,65 63,5 60,2 2,555 701048 701049 701050 701051
DN 3” 76,2 x 1,65 76,2 72,9 3,075 701052 701053 701054 701055
DN 4” 101,6 x 2,11 101,6 97,38 5,265 701056 701057 701058 701059
1.1
MB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
MEDI-Tube© - DIN 174571.2
Legende
A Rohr-AußendurchmesserB Rohr-Innendurchmesser
key
A outer tube diameterB inner tube diameter
Rohre für die Lebensmitteltechnik - DIN 17457,geschweißt nach DIN 17457 Tab. 6 K2G (EN 10217-7)(Anforderung DIN 17457 PK1/2)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Abmessungen
DIN 11850 Reihe 2DIN EN ISO 1127
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/1,6µmaußen: metallblank, gebeizt
Toleranzen
DIN EN ISO 1127
Verpackung
auf Wunsch:
Rohrenden mit Kunststoffkappen verschlossen,auf Wunsch einzeln in Folie verpackt.
Werkstoff (DIN) 1.4404
tubes for food industry - DIN 17457,welded according to DIN 17457 tab. 6 K2G (EN 10217-7)(requirement DIN 17457 tc1/2)
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 dimensions
DIN 11850 series 2DIN EN ISO 1127 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/1,6µmoutside: bright annealed, pickled
tolerances
DIN EN ISO 1127
packaging
on demand: Tube ends covered with plastic caps, on demand wrapped separately in plastic sheet.
material (AISI)
316L
DIN 17457
MEDI-Tube©
DINRohr-Øtube-Ø A B kg
BCArt.-Nr.
BDitem No
DN010 13 x 1,5 13 10 0,430 704065 704066
DN015 19 x 1,5 19 16 0,625 700550 700551
DN020 23 x 1,5 23 20 0,805 700552 700553
DN025 29 x 1,5 29 26 1,035 700554 700555
DN032 35 x 1,5 35 32 1,260 700556 700557
DN040 41 x 1,5 41 38 1,485 700558 700559
DN050 53 x 1,5 53 50 1,935 700560 700561
DN065 70 x 2,0 70 66 3,405 700564 700565
DN080 85 x 2,0 85 81 4,155 700568 700569
DN100 104 x 2,0 104 100 5,110 700549 700570
ISORohr-Øtube-Ø A B kg
BCArt.-Nr.
BDitem No
DN008 13,5 x 1,6 13,5 10,3 0,490 706301 706314
DN010 17,2 x 1,6 17,2 14,0 0,640 706302 706315
DN015 21,3 x 1,6 21,3 18,1 0,810 706303 706316
DN020 26,9 x 1,6 26,9 23,7 1,045 706304 706317
DN025 33,7 x 2,0 33,7 29,7 1,585 706305 706318
DN032 42,4 x 2,0 42,4 38,4 2,025 706306 706319
DN040 48,3 x 2,0 48,3 44,3 2,320 706307 706320
DN050 60,3 x 2,0 60,3 56,3 2,920 706308 706321
DN065 76,1 x 2,0 76,1 72,1 3,710 706309 706322
DN080 88,9 x 2,3 88,9 84,3 4,985 706310 706223
DN100 114,3 x 2,3 114,3 109,7 6,610 706311 706324
1.2
BC - geglüht, innen und außen gebeizt | annealed, inside and outside pickled
BD - geglüht, innen gebeizt / außen geschliffen | annealed, inside pickled / ground outside
weitere Abmessungen auf Anfrage | more dimensions on demand
fi ttings | Rohrverbindungen 2.
2. Rohrverbindungen | fi ttings
2.1 Steril-Verschraubung | aseptic union - STERI-Connect©
2.2 Steril-Verschraubung | aseptic union - DIN 11864-1-A-N
2.3 Steril-Flanschverbindung | aseptic fl ange connection - STERI-Connect©
2.4 Steril-Flanschverbindung | aseptic fl ange connection - DIN 11864-2-A-N
2.5 Steril-Clampverbindung | aseptic clamp connection - STERI-Connect©
2.6 Steril-Clampverbindung | aseptic clamp connection - DIN 11864-3-A-N
2.7 Clampverbindung | clamp connection - (ähnlich | similiar) DIN 32676
2.8 Zubehör (Dichtringe/Clampklammer, etc.) | accessories (seals/clamp ring, etc.)
2.9 S-Nippel -orbitalschweißfähig- | nipple -prepared for orbital welding-
2.10 S-Muffe -orbitalschweißfähig- | sleeve -prepared for orbital welding-
2.11 STERI-Cap© -orbitalschweißfähig- | -prepared for orbital welding-
Steril-Verschraubung | aseptic union2.1
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE GewindeSW Schlüsselweite
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE threadSW spanner gap
Steril-Verschraubung STERI-Connect© (metrisches Gewinde), gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435 (Blind-) Gewinde-/ Bundstutzen1.4301 NutmutterEPDM-FDA Dichtring
aseptic union STERI-Connect© (metric thread), made of tubular steel according to DIN EN 10088-3, blanks according to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) male part / liner304 nutEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
Steril-Verschraubung | aseptic union
DINRohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 67 SW19 M16 x 1,5 0,030 705207
DN008 10 x 1,0 10 8 67 SW22 M18 x 1,5 0,050 705206
DN010 12 x 1,0 12 10 68 SW27 M22 x 1,5 0,080 700307
DN015 19 x 1,5 19 16 68 42 M30 x 1,5 0,145 700311
DN020 23 x 1,5 23 20 70 48 M36 x 2,0 0,195 700313
DN025 29 x 1,5 29 26 81 55 M42 x 2,0 0,275 700315
DN032 35 x 1,5 35 32 82 65 M52 x 2,0 0,395 700318
DN040 41 x 1,5 41 38 83 70 M56 x 2,0 0,455 700320
DN050 53 x 1,5 53 50 84 82 M68 x 2,0 0,570 700322
DN065 70 x 2,0 70 66 112 105 M90 x 3,0 1,080 700325
DN080 85 x 2,0 85 81 112 115 M100 x 3,0 1,360 700328
DN100 104 x 2,0 104 100 114 145 M130 x 4,0 1,810 700309
ISORohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 67 SW27 M22 x 1,5 0,090 700327
DN010 17,2 x 1,6 17,2 14,0 68 SW30 M26 x 1,5 0,120 700308
DN015 21,3 x 1,6 21,3 18,1 68 42 M30 x 1,5 0,160 700312
DN020 26,9 x 1,6 26,9 23,7 70 48 M36 x 2,0 0,215 700314
DN025 33,7 x 2,0 33,7 29,7 81 55 M42 x 2,0 0,320 700317
DN032 42,4 x 2,0 42,4 38,4 82 65 M52 x 2,0 0,450 700319
DN040 48,3 x 2,0 48,3 44,3 83 70 M56 x 2,0 0,505 700321
DN050 60,3 x 2,0 60,3 56,3 84 82 M68 x 2,0 0,730 700323
DN065 76,1 x 2,0 76,1 72,1 112 105 M90 x 3,0 1,200 700326
DN080 88,9 x 2,3 88,9 84,3 112 115 M100 x 3,0 1,445 700329
DN100 114,3 x 2,3 114,3 109,7 114 145 M130 x 4,0 1,965 700310
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect© 2.1
Steril-Gewindestutzen (metrisches Gewinde) I aseptic male part (metric thread)
DINRohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 36 M16 x 1,5 0,010 705205
DN008 10 x 1,0 10 8 36 M18 x 1,5 0,020 704503
DN010 12 x 1,0 12 10 37 M22 x 1,5 0,030 700059
DN015 19 x 1,5 19 16 37 M30 x 1,5 0,045 703799
DN020 23 x 1,5 23 20 39 M36 x 2,0 0,060 700064
DN025 29 x 1,5 29 26 44 M42 x 2,0 0,085 700066
DN032 35 x 1,5 35 32 45 M52 x 2,0 0,140 700068
DN040 41 x 1,5 41 38 46 M56 x 2,0 0,160 700070
DN050 53 x 1,5 53 50 47 M68 x 2,0 0,185 700072
DN065 70 x 2,0 70 66 64 M90 x 3,0 0,450 700075
DN080 85 x 2,0 85 81 64 M100 x 3,0 0,545 700078
DN100 104 x 2,0 104 100 66 M130 x 4,0 0,710 700061
ISORohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 37 M22 x 1,5 0,035 700077
DN010 17,2 x 1,6 17,2 14,0 37 M26 x 1,5 0,040 700060
DN015 21,3 x 1,6 21,3 18,1 37 M30 x 1,5 0,055 700063
DN020 26,9 x 1,6 26,9 23,7 39 M36 x 2,0 0,075 700065
DN025 33,7 x 2,0 33,7 29,7 44 M42 x 2,0 0,115 700067
DN032 42,4 x 2,0 42,4 38,4 45 M52 x 2,0 0,180 700069
DN040 48,3 x 2,0 48,3 44,3 46 M56 x 2,0 0,195 700071
DN050 60,3 x 2,0 60,3 56,3 47 M68 x 2,0 0,320 700073
DN065 76,1 x 2,0 76,1 72,1 64 M90 x 3,0 0,540 700076
DN080 88,9 x 2,3 88,9 84,3 64 M100 x 3,0 0,605 700079
DN100 114,3 x 2,3 114,3 109,7 66 M130 x 4,0 0,785 700062
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect©2.1
Steril-Bundstutzen I aseptic liner
DINRohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 31 13 0,005 705204
DN008 10 x 1,0 10 8 33 15 0,010 700033
DN010 12 x 1,0 12 10 33 19 0,015 700102
DN015 19 x 1,5 19 16 33 27 0,025 700104
DN020 23 x 1,5 23 20 33 33 0,035 700105
DN025 29 x 1,5 29 26 39 39 0,060 700106
DN032 35 x 1,5 35 32 39 49 0,080 700107
DN040 41 x 1,5 41 38 39 53 0,090 700108
DN050 53 x 1,5 53 50 39 65 0,125 700109
DN065 70 x 2,0 70 66 50 85 0,205 700110
DN080 85 x 2,0 85 81 50 95 0,255 700111
DN100 104 x 2,0 104 100 50 124 0,310 700103
ISORohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 33 19 0,020 700035
DN010 17,2 x 1,6 17,2 14,0 33 23 0,025 700025
DN015 21,3 x 1,6 21,3 18,1 33 27 0,030 700027
DN020 26,9 x 1,6 26,9 23,7 33 33 0,040 700028
DN025 33,7 x 2,0 33,7 29,7 39 39 0,075 700029
DN032 42,4 x 2,0 42,4 38,4 39 49 0,095 700030
DN040 48,3 x 2,0 48,3 44,3 39 53 0,105 702499
DN050 60,3 x 2,0 60,3 56,3 39 65 0,150 700032
DN065 76,1 x 2,0 76,1 72,1 50 85 0,235 700034
DN080 88,9 x 2,3 88,9 84,3 50 95 0,280 700036
DN100 114,3 x 2,3 114,3 109,7 50 124 0,390 700026
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect© 2.1
Steril-Blindgewindestutzen (metrisches Gewinde) I aseptic blind male part (metric thread)
DINRohr-Øtube-Ø A C E SW kg
Art.-Nr.item No
DN006 8 x 1,0 8 26 M16 x 1,5 10 0,015 700018
DN008 10 x 1,0 10 26 M18 x 1,5 10 0,025 700020
DN010 12 x 1,0 12 27 M22 x 1,5 14 0,040 700022
DN015 19 x 1,5 19 27 M30 x 1,5 16 0,075 700011
DN020 23 x 1,5 23 27 M36 x 2,0 20 0,125 700012
DN025 29 x 1,5 29 27 M42 x 2,0 24 0,185 700013
DN032 35 x 1,5 35 29 M52 x 2,0 30 0,295 700015
DN040 41 x 1,5 41 30 M56 x 2,0 36 0,375 700016
DN050 53 x 1,5 53 30 M68 x 2,0 36 0,555 700017
DN065 70 x 2,0 70 38 M90 x 3,0 36 1,085 700019
DN080 85 x 2,0 85 38 M100 x 3,0 36 1,290 700021
DN100 104 x 2,0 104 40 M130 x 4,0 36 2,050 700010
ISORohr-Øtube-Ø A C E SW kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 27 M22 x 1,5 10 0,030 700024
DN010 17,2 x 1,6 17,2 27 M26 x 1,5 14 0,040 700009
DN015 21,3 x 1,6 21,3 26 M30 x 1,5 16 0,080 703794
DN020 26,9 x 1,6 26,9 28 M36 x 2,0 20 0,115 703116
DN025 33,7 x 2,0 33,7 29 M42 x 2,0 24 0,195 703117
DN032 42,4 x 2,0 42,4 30 M52 x 2,0 30 0,330 703121
DN040 48,3 x 2,0 48,3 30 M56 x 2,0 36 0,410 703119
DN050 60,3 x 2,0 60,3 31 M68 x 2,0 36 0,495 703118
DN065 76,1 x 2,0 76,1 38 M90 x 3,0 36 1,045 703120
DN080 88,9 x 2,3 88,9 38 M100 x 3,0 36 1,245 703115
DN100 114,3 x 2,3 114,3 40 M130 x 4,0 36 1,825 703114
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect©2.1
Steril-Blindbundstutzen I aseptic blind liner
DINRohr-Øtube-Ø A C D kg
Art.-Nr.item No
DN006 8 x 1,0 8 9,5 13 0,005 705215
DN008 10 x 1,0 10 9,5 15 0,010 705216
DN010 12 x 1,0 12 9,5 19 0,015 700080
DN015 19 x 1,5 19 9,5 27 0,025 700084
DN020 23 x 1,5 23 9,5 33 0,040 700086
DN025 29 x 1,5 29 10,5 39 0,075 700088
DN032 35 x 1,5 35 10,5 49 0,110 700090
DN040 41 x 1,5 41 10,5 53 0,150 700092
DN050 53 x 1,5 53 10,5 65 0,225 700094
DN065 70 x 2,0 70 11,5 85 0,380 700097
DN080 85 x 2,0 85 11,5 95 0,575 700100
DN100 104 x 2,0 104 11,5 124 0,810 700082
ISORohr-Øtube-Ø A C D kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 9,5 19 0,015 700099
DN010 17,2 x 1,6 17,2 9,5 23 0,025 700081
DN015 21,3 x 1,6 21,3 9,5 27 0,035 700085
DN020 26,9 x 1,6 26,9 9,5 33 0,050 700087
DN025 33,7 x 2,0 33,7 10,5 39 0,085 700089
DN032 42,4 x 2,0 42,4 10,5 49 0,135 700091
DN040 48,3 x 2,0 48,3 10,5 53 0,165 700093
DN050 60,3 x 2,0 60,3 10,5 65 0,255 700095
DN065 76,1 x 2,0 76,1 11,5 85 0,410 700098
DN080 88,9 x 2,3 88,9 11,5 95 0,600 700101
DN100 114,3 x 2,3 114,3 11,5 124 0,900 700083
STERI-Connect© 2.1
weitere Abmessungen auf Anfrage | more dimensions on demand
Sechskantmutter/Nutmutter (metrisches Gewinde) I hexagonal nut/nut (metric thread)
DINRohr-Øtube-Ø C D D1 E kg
Art.-Nr.item No
DN006 8 x 1,0 14,0 SW19 8,5 M16 x 1,5 0,015 705213
DN008 10 x 1,0 14,0 SW22 10,5 M18 x 1,5 0,020 705212
DN010 12 x 1,0 15,0 SW27 12,5 M22 x 1,5 0,035 700260
DN015 19 x 1,5 15,5 42 19,5 M30 x 1,5 0,075 700264
DN020 23 x 1,5 17,0 48 23,5 M36 x 2,0 0,100 700266
DN025 29 x 1,5 18,0 55 29,5 M42 x 2,0 0,130 700268
DN032 35 x 1,5 19,0 65 35,5 M52 x 2,0 0,175 700270
DN040 41 x 1,5 21,0 70 41,5 M56 x 2,0 0,205 700272
DN050 53 x 1,5 21,0 82 53,5 M68 x 2,0 0,260 700274
DN065 70 x 2,0 27,0 105 70,5 M90 x 3,0 0,425 700277
DN080 85 x 2,0 27,0 115 85,5 M100 x 3,0 0,560 700280
DN100 104 x 2,0 29,0 145 104,5 M130 x 4,0 0,790 700262
ISORohr-Øtube-Ø C D D1 E kg
Art.-Nr.item No
DN008 13,5 x 1,6 15,0 SW27 14,0 M22 x 1,5 0,035 700279
DN010 17,2 x 1,6 15,5 SW30 17,7 M26 x 1,5 0,055 700261
DN015 21,3 x 1,6 15,5 42 21,8 M30 x 1,5 0,075 700265
DN020 26,9 x 1,6 17,0 48 27,4 M36 x 2,0 0,100 700267
DN025 33,7 x 2,0 18,0 55 34,2 M42 x 2,0 0,130 700269
DN032 42,4 x 2,0 19,0 65 42,9 M52 x 2,0 0,175 700271
DN040 48,3 x 2,0 21,0 70 48,8 M56 x 2,0 0,205 700273
DN050 60,3 x 2,0 21,0 82 60,8 M68 x 2,0 0,260 700275
DN065 76,1 x 2,0 27,0 105 76,6 M90 x 3,0 0,425 700278
DN080 88,9 x 2,3 27,0 115 89,4 M100 x 3,0 0,560 700281
DN100 114,3 x 2,3 29,0 145 114,8 M130 x 4,0 0,790 700263
D1 Innen-Durchmesser
D1 inner diameter
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect©2.1
Steril-Verschraubung | aseptic union2.2
Steril-Verschraubung DIN 11864-1-A-N(Rundgewinde DIN 405), gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1, DIN 405-2 (Rundgewinde)
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435/1.4404 (Blind-) Gewinde-/ Bundstutzen1.4301 NutmutterEPDM-FDA Dichtring
aseptic union DIN 11864-1-A-N (round thread DIN 405), made of tubular steel according to DIN EN 10088-3, blanks acc. to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1, DIN 405-2 (round thread)
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) male part / liner304 nutEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE GewindeSW Schlüsselweite
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE threadSW spanner gap
Steril-Verschraubung I aseptic union
DINRohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.- Nr.1.4404
DN010 13 x 1,5 13 10 38 Rd28 x ¹⁄8” 76 0,140 704277 705156 32 0,120 705840
DN015 19 x 1,5 19 16 44 Rd34 x ¹⁄8” 76 0,225 704279 705157 32 0,190 705841
DN020 23 x 1,5 23 20 54 Rd44 x ¹⁄6” 76 0,315 704281 705158 34 0,265 705842
DN025 29 x 1,5 29 26 63 Rd52 x ¹⁄6” 77 0,430 704283 705159 42 0,360 705843
DN032 35 x 1,5 35 32 70 Rd58 x ¹⁄6” 88 0,500 704285 705160 48 0,440 705844
DN040 41 x 1,5 41 38 78 Rd65 x ¹⁄6” 88 0,625 704287 705161 50 0,540 705845
DN050 53 x 1,5 53 50 92 Rd78 x ¹⁄6” 89 0,875 704289 705162 54 0,750 705846
DN065 70 x 2,0 70 66 112 Rd95 x ¹⁄6” 113 1,580 704292 705163 62 1,250 705847
DN080 85 x 2,0 85 81 127 Rd110 x ¼” 117 2,175 704293 705164 72 1,690 705848
DN100 104 x 2,0 104 100 148 Rd130 x ¼” 120 3,210 704295 705165 86 2,180 705849
ISORohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 38 Rd28 x ¹⁄8” 76 0,155 704635 a. A.* 34 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 44 Rd34 x ¹⁄8” 76 0,215 704278 a. A.* 34 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 54 Rd44 x ¹⁄6” 78 0,315 704280 705166 34 0,265 706252
DN020 26,9 x 1,6 26,9 23,7 63 Rd52 x ¹⁄6” 78 0,455 704282 705167 42 0,375 706253
DN025 33,7 x 2,0 33,7 29,7 70 Rd58 x ¹⁄6” 88 0,565 704284 705168 48 0,460 706254
DN032 42,4 x 2,0 42,4 38,4 78 Rd65 x ¹⁄6” 88 0,735 704286 705169 50 0,620 706255
DN040 48,3 x 2,0 48,3 44,3 92 Rd78 x ¹⁄6” 90 0,995 704288 704920 50 0,815 706256
DN050 60,3 x 2,0 60,3 56,3 112 Rd95 x ¹⁄6” 114 1,640 704290 705170 54 1,270 706257
DN065 76,1 x 2,0 76,1 72,1 127 Rd110 x ¼” 117 2,240 704276 705171 72 1,840 706258
DN080 88,9 x 2,3 88,9 84,3 148 Rd130 x ¼” 122 2,970 704294 705172 86 2,370 706259
DN100 114,3 x 2,3 114,3 109,7 178 Rd160 x ¼” 130 4,030 704296 705173 86 a. A.* a. A.*
ASME-BPE
Rohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 38 Rd28 x ¹⁄8” 76 0,145 704648 a. A.* 42 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 44 Rd34 x ¹⁄8” 76 0,235 704649 a. A.* 42 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 63 Rd52 x ¹⁄6” 77 0,420 704650 705174 42 0,375 706260
DN 1½” 38,1 x 1,65 38,1 34,8 78 Rd65 x ¹⁄6” 88 0,600 704651 705175 50 0,530 706261
DN 2” 50,8 x 1,65 50,8 47,5 92 Rd78 x ¹⁄6” 89 0,845 704652 705176 54 0,725 706262
DN 2½” 63,5 x 1,65 63,5 60,2 112 Rd95 x ¹⁄6” 115 1,785 704653 705177 62 1,220 706263
DN 3” 76,2 x 1,65 76,2 72,9 127 Rd110 x ¼” 117 2,040 704654 705178 72 1,680 706264
DN 4” 101,6 x 2,11 101,6 97,38 148 Rd130 x ¼” 119 3,230 704655 705179 86 2,330 706265
DIN 11864-1-A-N 2.2
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Gewindestutzen | aseptic male part
DINRohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 Rd28 x ¹⁄8” 41 0,050 703280 705142 19 0,035 706275
DN015 19 x 1,5 19 16 Rd34 x ¹⁄8” 41 0,085 703002 705076 19 0,065 704092
DN020 23 x 1,5 23 20 Rd44 x ¹⁄6” 43 0,125 703260 705141 21 0,095 704095
DN025 29 x 1,5 29 26 Rd52 x ¹⁄6” 43 0,160 703276 704921 26 0,130 704048
DN032 35 x 1,5 35 32 Rd58 x ¹⁄6” 48 0,190 703277 704046 30 0,150 704974
DN040 41 x 1,5 41 38 Rd65 x ¹⁄6” 48 0,235 703278 704949 31 0,190 704950
DN050 53 x 1,5 53 50 Rd78 x ¹⁄6” 48 0,305 703279 704963 31 0,250 705631
DN065 70 x 2,0 70 66 Rd95 x ¹⁄6” 60 0,480 703282 704962 36 0,420 705632
DN080 85 x 2,0 85 81 Rd110 x ¼” 64 0,655 703283 704961 42 0,580 706276
DN100 104 x 2,0 104 100 Rd130 x ¼” 64 1,280 703284 705143 50 0,710 706277
ASME-BPE
Rohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 Rd28 x ¹⁄8” 41 0,055 704640 a. A.* 26 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 Rd34 x ¹⁄8” 41 0,095 704639 a. A.* 26 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 Rd52 x ¹⁄6” 43 0,160 703292 705150 26 0,135 706281
DN 1½” 38,1 x 1,65 38,1 34,8 Rd65 x ¹⁄6” 48,5 0,220 703269 705151 31 0,175 706282
DN 2” 50,8 x 1,65 50,8 47,5 Rd78 x ¹⁄6” 48,5 0,285 703293 705152 31 0,235 706283
DN 2½” 63,5 x 1,65 63,5 60,2 Rd95 x ¹⁄6” 60 0,605 703294 705153 36 0,390 706284
DN 3” 76,2 x 1,65 76,2 72,9 Rd110 x ¼” 64 0,740 703295 705154 42 0,580 706285
DN 4” 101,6 x 2,11 101,6 97,38 Rd130 x ¼” 64 1,240 703296 705155 50 0,705 706286
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-1-A-N2.2
ISORohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 Rd28 x ¹⁄8” 41 0,060 704642 a. A.* 21 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 Rd34 x ¹⁄8” 41 0,085 704641 a. A.* 21 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 Rd44 x ¹⁄6” 43 0,130 703281 705046 21 0,100 704966
DN020 26,9 x 1,6 26,9 23,7 Rd52 x ¹⁄6” 43 0,190 703285 705491 26 0,140 704945
DN025 33,7 x 2,0 33,7 29,7 Rd58 x ¹⁄6” 48 0,245 703286 705144 30 0,160 705621
DN032 42,4 x 2,0 42,4 38,4 Rd65 x ¹⁄6” 48 0,315 703287 705145 31 0,240 705606
DN040 48,3 x 2,0 48,3 44,3 Rd78 x ¹⁄6” 49 0,420 703288 704985 31 0,305 706278
DN050 60,3 x 2,0 60,3 56,3 Rd95 x ¹⁄6” 60 0,620 703289 705146 36 0,410 705607
DN065 76,1 x 2,0 76,1 72,1 Rd110 x ¼” 64 0,860 703290 705147 42 0,700 706279
DN080 88,9 x 2,3 88,9 84,3 Rd130 x ¼” 64 1,100 703291 705148 50 0,860 706280
DN100 114,3 x 2,3 114,3 109,7 Rd160 x ¼” 68 1,450 700039 705149 50 a. A.* a. A.*
ISORohr-Øtube-Ø A B D
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 21,9 39 0,035 704645 a. A.* 18 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 27,9 39 0,050 704646 a. A.* 18 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 35,9 40 0,075 703261 705028 18 0,055 705608
DN020 26,9 x 1,6 26,9 23,7 42,9 41 0,105 703262 705128 22 0,075 706036
DN025 33,7 x 2,0 33,7 29,7 48,9 47 0,130 703263 705129 25 0,110 705609
DN032 42,4 x 2,0 42,4 38,4 54,9 47 0,180 703264 705130 26 0,140 705610
DN040 48,3 x 2,0 48,3 44,3 66,9 48 0,255 703265 705036 30 0,190 705611
DN050 60,3 x 2,0 60,3 56,3 84,9 62 0,490 703266 705131 34 0,330 705027
DN065 76,1 x 2,0 76,1 72,1 98,9 61 0,660 703267 705132 38 0,420 706289
DN080 88,9 x 2,3 88,9 84,3 118,9 68 0,900 703268 705133 46 0,540 706290
DN100 114,3 x 2,3 114,3 109,7 147,9 72 1,200 704647 a. A.* 46 a. A.* a. A.*
ASME-BPE
Rohr-Øtube-Ø A B D
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 21,9 39 0,030 704644 a. A.* 22 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 27,9 39 0,060 704643 a. A.* 22 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 42,9 40 0,100 703270 705135 22 0,080 706291
DN 1½” 38,1 x 1,65 38,1 34,8 54,9 46,5 0,140 703271 705136 26 0,115 706292
DN 2” 50,8 x 1,65 50,8 47,5 66,9 47,5 0,240 703272 705137 30 0,170 706293
DN 2½” 63,5 x 1,65 63,5 60,2 84,9 63 0,460 703273 705138 34 0,300 706294
DN 3” 76,2 x 1,65 76,2 72,9 98,9 61 0,580 703274 705139 38 0,380 706295
DN 4” 101,6 x 2,11 101,6 97,38 118,9 65 1,020 703275 705140 46 0,655 706296
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-1-A-N 2.2
Steril-Bundstutzen I aseptic liner
DINRohr-Øtube-Ø A B D
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 21,9 39 0,030 703250 705123 17 0,025 704234
DN015 19 x 1,5 19 16 27,9 39 0,060 703251 705602 17 0,045 704037
DN020 23 x 1,5 23 20 35,9 38 0,080 703252 704045 18 0,060 704089
DN025 29 x 1,5 29 26 42,9 40 0,110 703253 704978 22 0,070 704233
DN032 35 x 1,5 35 32 48,9 47 0,120 703254 705124 25 0,100 704047
DN040 41 x 1,5 41 38 54,9 47 0,150 703255 705086 26 0,110 704793
DN050 53 x 1,5 53 50 66,9 48 0,250 703256 705125 30 0,180 705633
DN065 70 x 2,0 70 66 84,9 61 0,570 703257 704975 34 0,300 705634
DN080 85 x 2,0 85 81 98,9 61 0,800 703258 705126 38 0,390 706287
DN100 104 x 2,0 104 100 118,9 66 0,960 703259 705025 46 0,500 706288
ASME-BPE
Rohr-Øtube-Ø C D E kg
SW1.4435
Art.-Nr.1.4435
SW1.4404
item No1.4404
DN ½” 12,7 x 1,65 24 23 Rd28 x ¹⁄8” 0,095 SW19 704727 SW27 a. A.*
DN ¾” 19,05 x 1,65 24 28 Rd34 x ¹⁄8” 0,150 SW24 702728 SW27 a. A.*
DN 1” 25,4 x 1,65 24 44 Rd52 x ¹⁄6” 0,200 SW41 704729 SW27 705180
DN 1½” 38,1 x 1,65 24 60 Rd65 x ¹⁄6” 0,330 SW50 704730 SW27 705181
DN 2” 50,8 x 1,65 24 72 Rd78 x ¹⁄6” 0,480 SW65 704731 SW27 705182
DN 2½” 63,5 x 1,65 28 87 Rd95 x ¹⁄6” 0,620 SW80 704732 SW27 705183
DN 3” 76,2 x 1,65 28 100 Rd110 x ¼” 0,925 SW95 704733 SW27 705184
DN 4” 101,6 x 2,11 30 120 Rd130 x ¼” 1,270 SW115 704734 SW27 705185
Steril-Blindgewindestutzen | aseptic blind male part
DINRohr-Øtube-Ø C D E kg
SW1.4435
Art.-Nr.1.4435
SW1.4404
item No1.4404
DN010 13 x 1,5 24 23 Rd28 x ¹⁄8” 0,110 SW19 703403 SW19 705122
DN015 19 x 1,5 24 28 Rd34 x ¹⁄8” 0,150 SW24 703404 SW22 705186
DN020 23 x 1,5 24 34 Rd44 x ¹⁄6” 0,180 SW30 703405 SW22 705187
DN025 29 x 1,5 24 44 Rd52 x ¹⁄6” 0,250 SW41 703406 SW27 705188
DN032 35 x 1,5 24 53 Rd58 x ¹⁄6” 0,275 SW46 703407 SW27 705189
DN040 41 x 1,5 24 60 Rd65 x ¹⁄6” 0,375 SW50 703408 SW27 705190
DN050 53 x 1,5 24 72 Rd78 x ¹⁄6” 0,520 SW65 703409 SW27 705191
DN065 70 x 2,0 28 87 Rd95 x ¹⁄6” 0,705 SW80 703410 SW27 705192
DN080 85 x 2,0 28 100 Rd110 x ¼” 1,040 SW95 703411 SW27 705193
DN100 104 x 2,0 30 120 Rd130 x ¼” 1,330 SW115 703412 SW27 705194
ISORohr-Øtube-Ø C D E kg
SW1.4435
Art.-Nr.1.4435
SW1.4404
item No1.4404
DN008 13,5 x 1,6 24 23 Rd28 x ¹⁄8” 0,105 SW19 704717 SW22 a. A.*
DN010 17,2 x 1,6 24 28 Rd34 x ¹⁄8” 0,135 SW24 704716 SW22 a. A.*
DN015 21,3 x 1,6 24 34 Rd44 x ¹⁄6” 0,160 SW30 704718 SW22 705195
DN020 26,9 x 1,6 24 44 Rd52 x ¹⁄6” 0,230 SW41 704719 SW27 705196
DN025 33,7 x 2,0 24 53 Rd58 x ¹⁄6” 0,280 SW46 704720 SW27 705197
DN032 42,4 x 2,0 24 60 Rd65 x ¹⁄6” 0,425 SW50 704721 SW27 705198
DN040 48,3 x 2,0 24 72 Rd78 x ¹⁄6” 0,495 SW65 704722 SW27 705199
DN050 60,3 x 2,0 28 87 Rd95 x ¹⁄6” 0,620 SW80 704723 SW27 705200
DN065 76,1 x 2,0 28 100 Rd110 x ¼” 0,975 SW95 704724 SW27 705201
DN080 88,9 x 2,3 30 120 Rd130 x ¼” 1,150 SW115 704725 SW27 705202
DN100 114,3 x 2,3 38 150 Rd160 x ¼” 1,690 SW145 704726 SW27 a. A.*
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-1-A-N2.2
Steril-Blindbundstutzen | aseptic blind liner
DINRohr-Øtube-Ø A C D kg
Art.-Nr.1.4435
item No1.4404
DN010 13 x 1,5 18 9 21,9 0,080 703413 705110
DN015 19 x 1,5 24 9 27,9 0,115 703414 705109
DN020 23 x 1,5 30 10 35,9 0,125 703415 705108
DN025 29 x 1,5 35 12 42,9 0,190 703416 705021
DN032 35 x 1,5 41 13 48,9 0,210 703417 705107
DN040 41 x 1,5 48 13 54,9 0,310 703418 705023
DN050 53 x 1,5 61 14 66,9 0,440 703419 705059
DN065 70 x 2,0 79 16 84,9 0,620 703420 704965
DN080 85 x 2,0 93 16 98,9 0,860 703421 704964
DN100 104 x 2,0 114 20 118,9 1,180 703422 705024
ISORohr-Øtube-Ø A C D kg
Art.-Nr.1.4435
item No1.4404
DN008 13,5 x 1,6 18 9 21,9 0,085 704700 a. A.*
DN010 17,2 x 1,6 24 9 27,9 0,100 704701 a. A.*
DN015 21,3 x 1,6 30 10 35,9 0,120 704594 705029
DN020 26,9 x 1,6 35 12 42,9 0,170 704702 705111
DN025 33,7 x 2,0 41 13 48,9 0,200 704534 704967
DN032 42,4 x 2,0 48 13 54,9 0,330 704703 705112
DN040 48,3 x 2,0 61 14 66,9 0,380 704704 705022
DN050 60,3 x 2,0 79 16 84,9 0,500 704548 704992
DN065 76,1 x 2,0 93 16 98,9 0,790 704705 705113
DN080 88,9 x 2,3 114 20 118,9 0,945 704706 705114
DN100 114,3 x 2,3 137 22 147,9 1,450 704707 a. A.*
ASME-BPE
Rohr-Øtube-Ø A C D kg
Art.-Nr.1.4435
item No1.4404
DN ½” 12,7 x 1,65 18 9 21,9 0,075 704708 a. A.*
DN ¾” 19,05 x 1,65 24 9 27,9 0,120 704709 a. A.*
DN 1” 25,4 x 1,65 35 12 42,9 0,160 704710 705116
DN 1½” 38,1 x 1,65 48 13 54,9 0,270 704711 705117
DN 2” 50,8 x 1,65 61 14 66,9 0,405 704712 705118
DN 2½” 63,5 x 1,65 79 16 84,9 0,520 704713 705119
DN 3” 76,2 x 1,65 93 16 98,9 0,760 704714 705120
DN 4” 101,6 x 2,11 114 20 118,9 1,095 704715 705121
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-1-A-N 2.2
Nutmutter I nut
DINRohr-Øtube-Ø C D D1 E kg
Art.-Nr.1.4301
item No1.4404
DN010 13 x 1,5 18 38 19 Rd28 x ¹⁄8” 0,060 1182 701474
DN015 19 x 1,5 18 44 25 Rd34 x ¹⁄8” 0,080 1183 701475
DN020 23 x 1,5 20 54 31 Rd44 x ¹⁄6” 0,110 1185 701476
DN025 29 x 1,5 21 63 36 Rd52 x ¹⁄6” 0,160 1186 701477
DN032 35 x 1,5 21 70 42 Rd58 x ¹⁄6” 0,190 1187 701478
DN040 41 x 1,5 21 78 49 Rd65 x ¹⁄6” 0,240 1188 701479
DN050 53 x 1,5 22 92 62 Rd78 x ¹⁄6” 0,320 1189 701480
DN065 70 x 2,0 25 112 80 Rd95 x ¹⁄6” 0,530 1191 701481
DN080 85 x 2,0 29 127 94 Rd110 x ¼” 0,720 1192 701482
DN100 104 x 2,0 31 148 115 Rd130 x ¼” 0,970 1193 701483
ISORohr-Øtube-Ø C D D1 E kg
Art.-Nr.1.4301
item No1.4404
DN008 13,5 x 1,6 18 38 19 Rd28 x ¹⁄8” 0,060 1182 701474
DN010 17,2 x 1,6 18 44 25 Rd34 x ¹⁄8” 0,080 1183 701475
DN015 21,3 x 1,6 20 54 31 Rd44 x ¹⁄6” 0,110 1185 701476
DN020 26,9 x 1,6 21 63 36 Rd52 x ¹⁄6” 0,160 1186 701477
DN025 33,7 x 2,0 21 70 42 Rd58 x ¹⁄6” 0,190 1187 701478
DN032 42,4 x 2,0 21 78 49 Rd65 x ¹⁄6” 0,240 1188 701479
DN040 48,3 x 2,0 22 92 62 Rd78 x ¹⁄6” 0,320 1189 701480
DN050 60,3 x 2,0 25 112 80 Rd95 x ¹⁄6” 0,530 1191 701481
DN065 76,1 x 2,0 29 127 94 Rd110 x ¼” 0,720 1192 701482
DN080 88,9 x 2,3 31 148 115 Rd130 x ¼” 0,970 1193 701483
DN100 114,3 x 2,3 35 178 138 Rd160 x ¼” 1,380 1194 701484
ASME-BPE
Rohr-Øtube-Ø C D D1 E kg
Art.-Nr.1.4301
item No1.4404
DN ½” 12,7 x 1,65 18 38 19 Rd28 x ¹⁄8” 0,060 1182 701474
DN ¾” 19,05 x 1,65 18 44 25 Rd34 x ¹⁄8” 0,080 1183 701475
DN 1” 25,4 x 1,65 21 63 36 Rd52 x ¹⁄6” 0,160 1186 701477
DN 1½” 38,1 x 1,65 21 78 49 Rd65 x ¹⁄6” 0,240 1188 701479
DN 2” 50,8 x 1,65 22 92 62 Rd78 x ¹⁄6” 0,320 1189 701480
DN 2½” 63,5 x 1,65 25 112 80 Rd95 x ¹⁄6” 0,530 1191 701481
DN 3” 76,2 x 1,65 29 127 94 Rd110 x ¼” 0,720 1192 701482
DN 4” 101,6 x 2,11 31 148 115 Rd130 x ¼” 0,970 1193 701483
weitere Abmessungen auf Anfrage | more dimensions on demand
D1 Innen-Durchmesser
D1 inner diameter
DIN 11864-1-A-N2.2
Steril-Flanschverbindung | aseptic fl ange connection 2.3
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Flansch-AußendurchmesserLK Lochkreis
key
A outer tube diameterB inner tube diameterC total lengthD outer fl ange diameterLK diameter of the bolt hole circle
Steril-Flanschverbindung STERI-Connect©, gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435 (Blind-) Flansch mit Vor-/ Rücksprung1.4301 SechskantschraubensatzEPDM-FDA Dichtring
aseptic fl ange connection STERI-Connect©, made of tubular steel according to DIN EN 10088-3, blanks acc. to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) fl ange with projection/ -backward move304 hexagonal screw setEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
STERI-Connect©
Steril-Flanschverbindung | aseptic fl ange connection
DINRohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 10 x 1,0 10 8 88 60 40 0,520 705214
DN010 12 x 1,0 12 10 88 65 45 0,645 700439
DN015 19 x 1,5 19 16 88 75 55 0,885 700443
DN020 23 x 1,5 23 20 92 80 60 0,995 700445
DN025 29 x 1,5 29 26 102 85 65 1,150 700447
DN032 35 x 1,5 35 32 102 95 75 1,265 700449
DN040 41 x 1,5 41 38 102 100 80 1,385 700451
DN050 53 x 1,5 53 50 106 110 90 1,830 700453
DN065 70 x 2,0 70 66 130 140 115 3,120 700456
DN080 85 x 2,0 85 81 130 150 125 3,835 700459
DN100 104 x 2,0 104 100 134 175 150 4,740 700441
ISORohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 88 60 40 0,605 700458
DN010 17,2 x 1,6 17,2 14,0 88 65 45 0,685 700440
DN015 21,3 x 1,6 21,3 18,1 88 75 55 0,770 700444
DN020 26,9 x 1,6 26,9 23,7 92 80 60 0,915 700446
DN025 33,7 x 2,0 33,7 29,7 102 85 65 1,035 700448
DN032 42,4 x 2,0 42,4 38,4 102 95 75 1,310 700450
DN040 48,3 x 2,0 48,3 44,3 102 100 80 1,650 700452
DN050 60,3 x 2,0 60,3 56,3 106 110 90 2,155 700454
DN065 76,1 x 2,0 76,1 72,1 130 140 115 3,085 700457
DN080 88,9 x 2,3 88,9 84,3 130 150 125 3,520 700460
DN100 114,3 x 2,3 114,3 109,7 134 175 150 4,470 700442
2.3
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect©
Steril-Flansch mit Vorsprung | aseptic fl ange with projection
DINRohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 10 x 1,0 10 8 45 60 40 0,175 704205
DN010 12 x 1,0 12 10 45 65 45 0,255 700417
DN015 19 x 1,5 19 16 45 75 55 0,355 700421
DN020 23 x 1,5 23 20 47 80 60 0,400 700423
DN025 29 x 1,5 29 26 52 85 65 0,470 700425
DN032 35 x 1,5 35 32 52 95 75 0,545 700427
DN040 41 x 1,5 41 38 52 100 80 0,625 700429
DN050 53 x 1,5 53 50 54 110 90 0,790 703007
DN065 70 x 2,0 70 66 66 140 115 1,480 700434
DN080 85 x 2,0 85 81 66 150 125 1,765 700437
DN100 104 x 2,0 104 100 68 175 150 2,180 700419
ISORohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 45 60 40 0,210 700436
DN010 17,2 x 1,6 17,2 14,0 45 65 45 0,255 700418
DN015 21,3 x 1,6 21,3 18,1 45 75 55 0,290 700422
DN020 26,9 x 1,6 26,9 23,7 47 80 60 0,365 700424
DN025 33,7 x 2,0 33,7 29,7 52 85 65 0,440 700426
DN032 42,4 x 2,0 42,4 38,4 52 95 75 0,550 700428
DN040 48,3 x 2,0 48,3 44,3 52 100 80 0,585 700430
DN050 60,3 x 2,0 60,3 56,3 54 110 90 0,780 700432
DN065 76,1 x 2,0 76,1 72,1 66 140 115 1,345 700435
DN080 88,9 x 2,3 88,9 84,3 66 150 125 1,560 700438
DN100 114,3 x 2,3 114,3 109,7 68 175 150 2,055 700420
2.3
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Flansch mit Rücksprung | aseptic fl ange with backward move
DINRohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 10 x 1,0 10 8 45 60 40 0,205 704054
DN010 12 x 1,0 12 10 45 65 45 0,250 700395
DN015 19 x 1,5 19 16 45 75 55 0,390 700399
DN020 23 x 1,5 23 20 47 80 60 0,455 700401
DN025 29 x 1,5 29 26 52 85 65 0,540 700403
DN032 35 x 1,5 35 32 52 95 75 0,630 700405
DN040 41 x 1,5 41 38 52 100 80 0,680 700407
DN050 53 x 1,5 53 50 54 110 90 0,880 700409
DN065 70 x 2,0 70 66 66 140 115 1,430 700412
DN080 85 x 2,0 85 81 66 150 125 1,860 700415
DN100 104 x 2,0 104 100 68 175 150 2,350 700397
ISORohr-Øtube-Ø A B C D LK kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 45 60 40 0,255 700414
DN010 17,2 x 1,6 17,2 14,0 45 65 45 0,290 700396
DN015 21,3 x 1,6 21,3 18,1 45 75 55 0,340 700400
DN020 26,9 x 1,6 26,9 23,7 47 80 60 0,410 700402
DN025 33,7 x 2,0 33,7 29,7 52 85 65 0,515 700404
DN032 42,4 x 2,0 42,4 38,4 52 95 75 0,620 700406
DN040 48,3 x 2,0 48,3 44,3 52 100 80 0,855 700408
DN050 60,3 x 2,0 60,3 56,3 54 110 90 1,165 700410
DN065 76,1 x 2,0 76,1 72,1 66 140 115 1,530 700413
DN080 88,9 x 2,3 88,9 84,3 66 150 125 1,710 700416
DN100 114,3 x 2,3 114,3 109,7 68 175 150 2,205 700398
STERI-Connect© 2.3
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindfl ansch mit Vorsprung | aseptic blind fl ange with projection
DINRohr-Øtube-Ø C D LK kg
Art.-Nr.item No
DN008 10 x 1,0 10 60 40 0,195 700393
DN010 12 x 1,0 10 65 45 0,250 700383
DN015 19 x 1,5 10 75 55 0,365 700385
DN020 23 x 1,5 12 80 60 0,420 700386
DN025 29 x 1,5 12 85 65 0,480 700387
DN032 35 x 1,5 12 95 75 0,635 700388
DN040 41 x 1,5 12 100 80 0,775 700389
DN050 53 x 1,5 14 110 90 0,940 700390
DN065 70 x 2,0 16 140 115 1,540 700392
DN080 85 x 2,0 16 150 125 1,845 700394
DN100 104 x 2,0 18 175 150 2,585 700384
ISORohr-Øtube-Ø C D LK kg
Art.-Nr.item No
DN008 13,5 x 1,6 10 60 40 0,195 705244
DN010 17,2 x 1,6 10 65 45 0,250 705245
DN015 21,3 x 1,6 10 75 55 0,360 705246
DN020 26,9 x 1,6 12 80 60 0,450 705247
DN025 33,7 x 2,0 12 85 65 0,485 704204
DN032 42,4 x 2,0 12 95 75 0,615 704609
DN040 48,3 x 2,0 12 100 80 0,735 705248
DN050 60,3 x 2,0 14 110 90 0,940 705249
DN065 76,1 x 2,0 16 140 115 1,540 705250
DN080 88,9 x 2,3 16 150 125 1,810 705251
DN100 114,3 x 2,3 18 175 150 2,585 705252
STERI-Connect©2.3
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindfl ansch mit Rücksprung | aseptic blind fl ange with backward move
DINRohr-Øtube-Ø C D LK kg
Art.-Nr.item No
DN008 10 x 1,0 10 60 40 0,195 700381
DN010 12 x 1,0 10 65 45 0,250 700371
DN015 19 x 1,5 10 75 55 0,360 700373
DN020 23 x 1,5 12 80 60 0,440 700374
DN025 29 x 1,5 12 85 65 0,505 700375
DN032 35 x 1,5 12 95 75 0,635 700376
DN040 41 x 1,5 12 100 80 0,670 700377
DN050 53 x 1,5 14 110 90 0,940 700378
DN065 70 x 2,0 16 140 115 1,545 700380
DN080 85 x 2,0 16 150 125 1,840 700382
DN100 104 x 2,0 18 175 150 2,615 700372
ISORohr-Øtube-Ø C D LK kg
Art.-Nr.item No
DN008 13,5 x 1,6 10 60 40 0,190 703464
DN010 17,2 x 1,6 10 65 45 0,245 703465
DN015 21,3 x 1,6 10 75 55 0,335 703466
DN020 26,9 x 1,6 12 80 60 0,450 703467
DN025 33,7 x 2,0 12 85 65 0,500 702564
DN032 42,4 x 2,0 12 95 75 0,620 703468
DN040 48,3 x 2,0 12 100 80 0,670 703469
DN050 60,3 x 2,0 14 110 90 0,930 703470
DN065 76,1 x 2,0 16 140 115 1,540 703471
DN080 88,9 x 2,3 16 150 125 1,870 703472
DN100 114,3 x 2,3 18 175 150 2,690 702563
STERI-Connect© 2.3
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Flanschverbindung | aseptic fl ange connection2.4
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Flansch-AußendurchmesserLK Lochkreis
key
A outer tube diameterB inner tube diameterC total lengthD outer fl ange diameterLK diameter of the bolt hole circle
Steril-Flanschverbindung DIN 11864-2-A-N, gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435/1.4404 (Blind-) Nut-/ Bundfl ansch1.4301 SechskantschraubensatzEPDM-FDA Dichtring
aseptic fl ange connection DIN 11864-2-A-N, made of tubular steel according to DIN EN 10088-3, blanks acc. to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) round-/ groove fl ange304 hexagonal screw setEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
DIN 11864-2-A-N
Steril-Flanschverbindung | aseptic fl ange connection
DINRohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 54 37 80 0,400 703321 705253 48 0,340 706177
DN015 19 x 1,5 19 16 59 42 80 0,500 703323 705084 48 0,425 705254
DN020 23 x 1,5 23 20 64 47 80 0,565 703324 705255 48 0,475 706178
DN025 29 x 1,5 29 26 70 53 80 0,675 703325 703140 48 0,575 706179
DN032 35 x 1,5 35 32 76 59 90 0,740 703326 705256 48 0,640 706180
DN040 41 x 1,5 41 38 82 65 90 0,815 703327 703141 48 0,775 706181
DN050 53 x 1,5 53 50 94 77 90 0,965 703328 704619 48 0,800 706182
DN065 70 x 2,0 70 66 113 95 108 1,460 703329 705257 48 1,120 706183
DN080 85 x 2,0 85 81 133 112 116 2,075 703330 704549 52 1,700 706184
DN100 104 x 2,0 104 100 159 137 116 3,215 703331 705258 52 2,665 706185
DN125 129 x 2,0 129 125 183 161 120 3,670 703332 704603 56 3,060 706186
DN150 154 x 2,0 154 150 213 188 120 4,820 703333 704604 56 4,340 706187
ISORohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 54 37 80 0,435 703886 a. A.* 48 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 59 42 80 0,460 704098 a. A.* 48 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 62 45 80 0,550 703334 705259 48 0,410 706188
DN020 26,9 x 1,6 26,9 23,7 69 52 80 0,630 703335 705260 48 0,495 706189
DN025 33,7 x 2,0 33,7 29,7 74 57 90 0,725 703336 705261 48 0,560 706190
DN032 42,4 x 2,0 42,4 38,4 82 65 90 0,845 703337 705079 48 0,650 705262
DN040 48,3 x 2,0 48,3 44,3 88 71 90 0,930 703338 705263 48 0,735 706191
DN050 60,3 x 2,0 60,3 56,3 103 85 108 1,230 703339 705264 48 0,945 705636
DN065 76,1 x 2,0 76,1 72,1 125 104 112 2,000 703340 705265 48 1,400 706192
DN080 88,9 x 2,3 88,9 84,3 137 116 116 2,470 703341 705266 52 1,695 706193
DN100 114,3 x 2,3 114,3 109,7 168 146 116 3,830 703342 705267 52 2,790 706194
ASME-BPE
Rohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 52 35 80 0,420 704637 a. A.* 48 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 57 40 80 0,530 704636 a. A.* 48 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 66 49 80 0,595 703343 705268 48 450 706195
DN 1½” 38,1 x 1,65 38,1 34,8 79 62 90 0,760 703344 705269 48 605 706196
DN 2” 50,8 x 1,65 50,8 47,5 92 75 90 0,970 703345 705270 48 770 706197
DN 2½” 63,5 x 1,65 63,5 60,2 107 89 108 1,275 703346 705271 48 945 706198
DN 3” 76,2 x 1,65 76,2 72,9 125 104 112 1,850 703347 705272 48 1425 706199
DN 4” 101,6 x 2,11 101,6 97,38 157 135 116 3,185 703348 705273 52 2530 706200
2.4
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Nutfl ansch | aseptic groove fl ange
DINRohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 54 37 41,5 0,190 703376 704948 25,5 0,160 706202
DN015 19 x 1,5 19 16 59 42 41,5 0,245 703377 705085 25,5 0,210 706203
DN020 23 x 1,5 23 20 64 47 41,5 0,285 703378 705291 25,5 0,235 706204
DN025 29 x 1,5 29 26 70 53 41,5 0,345 703379 705033 25,5 0,290 705658
DN032 35 x 1,5 35 32 76 59 46,5 0,380 703380 705292 25,5 0,330 706205
DN040 41 x 1,5 41 38 82 65 46,5 0,415 703381 705293 25,5 0,335 706206
DN050 53 x 1,5 53 50 94 77 46,5 0,495 703382 705058 25,5 0,400 704494
DN065 70 x 2,0 70 66 113 95 55,5 0,740 703383 705294 25,5 0,540 705035
DN080 85 x 2,0 85 81 133 112 59,5 1,035 703384 703960 27,5 0,820 705677
DN100 104 x 2,0 104 100 159 137 59,5 1,595 703385 703584 27,5 1,300 706207
DN125 129 x 2,0 129 125 183 161 61,5 1,750 703386 705627 29,5 1,550 706208
DN150 154 x 2,0 154 150 213 188 61,5 2,440 706201 703387 29,5 2,205 706209
ISORohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 54 37 41,5 0,205 704297 a. A.* 25,5 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 59 42 41,5 0,220 704662 a. A.* 25,5 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 62 45 41,5 0,270 703388 705301 25,5 0,200 706210
DN020 26,9 x 1,6 26,9 23,7 69 52 41,5 0,310 703389 704976 25,5 0,250 706211
DN025 33,7 x 2,0 33,7 29,7 74 57 46,5 0,360 703390 705302 25,5 0,290 706212
DN032 42,4 x 2,0 42,4 38,4 82 65 46,5 0,425 703391 705303 25,5 0,330 706213
DN040 48,3 x 2,0 48,3 44,3 88 71 46,5 0,480 703392 704947 25,5 0,370 706214
DN050 60,3 x 2,0 60,3 56,3 103 85 55,5 0,630 703393 705304 25,5 0,480 706215
DN065 76,1 x 2,0 76,1 72,1 125 104 57,5 0,980 703394 705305 25,5 0,760 706216
DN080 88,9 x 2,3 88,9 84,3 137 116 59,5 1,210 703395 705306 27,5 0,860 706217
DN100 114,3 x 2,3 114,3 109,7 168 146 59,5 1,885 703396 705307 27,5 1,410 706218
ASME-BPE
Rohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 52 35 41,5 0,200 704663 a. A.* 25,5 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 57 40 41,5 0,260 704664 a. A.* 25,5 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 66 49 41,5 0,295 703397 705295 25,5 0,230 706219
DN 1½” 38,1 x 1,65 38,1 34,8 79 62 46,5 0,380 703398 705296 25,5 0,310 706220
DN 2” 50,8 x 1,65 50,8 47,5 92 75 46,5 0,490 703400 705297 25,5 0,395 706221
DN 2½” 63,5 x 1,65 63,5 60,2 107 89 55,5 0,635 703399 705298 25,5 0,480 706222
DN 3” 76,2 x 1,65 76,2 72,9 125 104 57,5 0,920 703401 705299 25,5 0,730 706223
DN 4” 101,6 x 2,11 101,6 97,38 157 135 59,5 1,595 703402 705300 27,5 1,290 706224
DIN 11864-2-A-N2.4
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-2-A-N
Steril-Bundfl ansch | aseptic round fl ange
DINRohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 54 37 40 0,170 703349 704946 24 0,140 706226
DN015 19 x 1,5 19 16 59 42 40 0,215 703350 705309 24 0,175 706227
DN020 23 x 1,5 23 20 64 47 40 0,240 703351 705310 24 0,200 706228
DN025 29 x 1,5 29 26 70 53 40 0,290 703352 705032 24 0,245 705659
DN032 35 x 1,5 35 32 76 59 45 0,320 703353 705311 24 0,270 706229
DN040 41 x 1,5 41 38 82 65 45 0,360 703354 704581 24 0,300 706230
DN050 53 x 1,5 53 50 94 77 45 0,430 703355 705057 24 0,360 706231
DN065 70 x 2,0 70 66 113 95 54 0,640 703356 705312 24 0,500 706232
DN080 85 x 2,0 85 81 133 112 58 0,920 703357 704580 26 0,760 706233
DN100 104 x 2,0 104 100 159 137 58 1,480 703358 705313 26 1,245 706234
DN125 129 x 2,0 129 125 183 161 60 1,745 703359 705628 28 1,500 706235
DN150 154 x 2,0 154 150 213 188 60 2,440 703360 706225 28 2,140 706236
ISORohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN008 13,5 x 1,6 13,5 10,3 54 37 40 0,190 704298 a. A.* 24 a. A.* a. A.*
DN010 17,2 x 1,6 17,2 14,0 59 42 40 0,200 704659 a. A.* 24 a. A.* a. A.*
DN015 21,3 x 1,6 21,3 18,1 62 45 40 0,240 703361 705314 24 0,195 706237
DN020 26,9 x 1,6 26,9 23,7 69 52 40 0,280 703362 704977 24 0,250 706238
DN025 33,7 x 2,0 33,7 29,7 74 57 45 0,325 703363 705315 24 0,270 706239
DN032 42,4 x 2,0 42,4 38,4 82 65 45 0,380 703364 705316 24 0,320 706240
DN040 48,3 x 2,0 48,3 44,3 88 71 45 0,410 703365 705317 24 0,350 706241
DN050 60,3 x 2,0 60,3 56,3 103 85 54 0,560 703366 705318 24 0,460 706242
DN065 76,1 x 2,0 76,1 72,1 125 104 56 0,900 703367 705319 24 0,640 706243
DN080 88,9 x 2,3 88,9 84,3 137 116 58 1,120 703368 705320 26 0,830 706244
DN100 114,3 x 2,3 114,3 109,7 168 146 58 1,765 703369 705321 26 1,375 706245
ASME-BPE
Rohr-Øtube-Ø A B D LK
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN ½” 12,7 x 1,65 12,7 9,4 52 35 40 0,180 704661 a. A.* 24 a. A.* a. A.*
DN ¾” 19,05 x 1,65 19,05 15,75 57 40 40 0,230 704660 a. A.* 24 a. A.* a. A.*
DN 1” 25,4 x 1,65 25,4 22,1 66 49 40 0,260 703370 705322 24 0,230 706246
DN 1½” 38,1 x 1,65 38,1 34,8 79 62 45 0,340 703371 705323 24 0,295 706247
DN 2” 50,8 x 1,65 50,8 47,5 92 75 45 0,440 703372 705324 24 0,370 706248
DN 2½” 63,5 x 1,65 63,5 60,2 107 89 54 0,560 703373 705325 24 0,460 706249
DN 3” 76,2 x 1,65 76,2 72,9 125 104 56 0,830 703374 705326 24 0,700 706250
DN 4” 101,6 x 2,11 101,6 97,38 157 135 58 1,470 703375 705327 26 1,255 706251
2.4
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindnutfl ansch | aseptic blind groove fl ange
DINRohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN010 13 x 1,5 11,5 54 37 0,040 703423 705426
DN015 19 x 1,5 11,5 59 42 0,060 703424 705427
DN020 23 x 1,5 11,5 64 47 0,080 703425 705428
DN025 29 x 1,5 11,5 70 53 0,110 703426 705429
DN032 35 x 1,5 11,5 76 59 0,140 703427 705430
DN040 41 x 1,5 11,5 82 65 0,180 703428 704927
DN050 53 x 1,5 11,5 94 77 0,260 703429 704928
DN065 70 x 2,0 11,5 113 95 0,380 703430 705431
DN080 85 x 2,0 13,5 133 112 0,630 703431 705432
DN100 104 x 2,0 15,5 159 137 1,090 703432 705433
DN125 129 x 2,0 15,5 183 161 1,590 706268 705434
DN150 154 x 2,0 17,5 213 188 2,520 706269 705435
ISORohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN008 13,5 x 1,6 11,5 54 37 0,190 704697 a. A.*
DN010 17,2 x 1,6 11,5 59 42 0,210 704696 a. A.*
DN015 21,3 x 1,6 11,5 62 45 0,220 704695 705436
DN020 26,9 x 1,6 11,5 69 52 0,270 704694 705437
DN025 33,7 x 2,0 11,5 74 57 0,310 704693 705438
DN032 42,4 x 2,0 11,5 82 65 0,370 704692 705439
DN040 48,3 x 2,0 11,5 88 71 0,430 704691 705440
DN050 60,3 x 2,0 11,5 103 85 0,590 704497 705441
DN065 76,1 x 2,0 13,5 125 104 1,010 704498 705442
DN080 88,9 x 2,3 13,5 137 116 1,220 704499 705443
DN100 114,3 x 2,3 15,5 168 146 2,210 704698 705444
ASME-BPE
Rohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN ½” 12,7 x 1,65 11,5 52 35 0,170 704684 a. A.*
DN ¾” 19,05 x 1,65 11,5 57 40 0,190 704685 a. A.*
DN 1” 25,4 x 1,65 11,5 66 49 0,240 704686 705447
DN 1½” 38,1 x 1,65 11,5 79 62 0,340 704687 705448
DN 2” 50,8 x 1,65 11,5 92 75 0,460 704688 705449
DN 2½” 63,5 x 1,65 11,5 107 89 0,600 704699 705450
DN 3” 76,2 x 1,65 13,5 125 104 1,000 704689 705451
DN 4” 101,6 x 2,11 15,5 157 135 1,900 704690 705452
DIN 11864-2-A-N2.4
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindbundfl ansch | aseptic blind round fl ange
DINRohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN010 13 x 1,5 10 54 37 0,160 703587 705399
DN015 19 x 1,5 10 59 42 0,190 703588 705400
DN020 23 x 1,5 10 64 47 0,220 703589 705401
DN025 29 x 1,5 10 70 53 0,270 703590 704988
DN032 35 x 1,5 10 76 59 0,320 703591 704989
DN040 41 x 1,5 10 82 65 0,370 703592 705402
DN050 53 x 1,5 10 94 77 0,480 703593 705403
DN065 70 x 2,0 10 113 95 0,690 703594 705404
DN080 85 x 2,0 12 133 112 1,150 703595 705405
DN100 104 x 2,0 14 159 137 1,970 703596 705406
DN125 129 x 2,0 14 183 161 2,625 706266 705407
DN150 154 x 2,0 16 213 188 4,120 706267 705408
ISORohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN008 13,5 x 1,6 10 54 37 0,170 704665 a. A.*
DN010 17,2 x 1,6 10 59 42 0,190 704666 a. A.*
DN015 21,3 x 1,6 10 62 45 0,210 704667 705409
DN020 26,9 x 1,6 10 69 52 0,260 704668 705410
DN025 33,7 x 2,0 10 74 57 0,300 704669 705411
DN032 42,4 x 2,0 10 82 65 0,360 704670 705412
DN040 48,3 x 2,0 10 88 71 0,420 704671 705413
DN050 60,3 x 2,0 10 103 85 0,580 704672 705414
DN065 76,1 x 2,0 12 125 104 0,995 704673 705415
DN080 88,9 x 2,3 12 137 116 1,200 704674 705416
DN100 114,3 x 2,3 14 168 146 2,170 704675 705417
ASME-BPE
Rohr-Øtube-Ø C D LK kg
Art.-Nr.1.4435
item No1.4404
DN ½” 12,7 x 1,65 10 52 35 0,160 704676 a. A.*
DN ¾” 19,05 x 1,65 10 57 40 0,180 704677 a. A.*
DN 1” 25,4 x 1,65 10 66 49 0,240 704678 705419
DN 1½” 38,1 x 1,65 10 79 62 0,340 704679 705420
DN 2” 50,8 x 1,65 10 92 75 0,460 704680 705421
DN 2½” 63,5 x 1,65 10 107 89 0,610 704681 705423
DN 3” 76,2 x 1,65 12 125 104 1,010 704682 705424
DN 4” 101,6 x 2,11 14 157 135 1,920 704683 705425
DIN 11864-2-A-N 2.4
* auf Anfrage | on demand weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Clampverbindung | aseptic clamp connection2.5
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE Flansch-Außendurchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE outer fl ange diameter
Steril-Clampverbindung STERI-Connect©, gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435 (Blind-) Clampstutzen mit Vor-/ -Rücksprung1.4308 ClampklammerEPDM-FDA Dichtring
aseptic clamp connection STERI-Connect©, made of tubular steel according to DIN EN 10088-3, blanks according to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) clamp with projection/ -backward move304 clamp ringEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
STERI-Connect©
Steril-Clampverbindung | aseptic clamp connection
DINRohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 68 39 Ø 25 0,185 705243
DN008 10 x 1,0 10 8 68 39 Ø 25 0,195 700218
DN010 12 x 1,0 12 10 68 39 Ø 25 0,195 700202
DN015 19 x 1,5 19 16 68 39 Ø 25 0,205 700206
DN020 23 x 1,5 23 20 68 63 Ø 50,5 0,415 700208
DN025 29 x 1,5 29 26 76 63 Ø 50,5 0,405 700210
DN032 35 x 1,5 35 32 76 63 Ø 50,5 0,390 700212
DN040 41 x 1,5 41 38 76 76 Ø 64 0,575 700214
DN050 53 x 1,5 53 50 76 90 Ø 77,5 0,735 700216
DN065 70 x 2,0 70 66 96 104 Ø 91 0,895 700219
DN080 85 x 2,0 85 81 96 118 Ø 106 1,165 700222
DN100 104 x 2,0 104 100 96 130 Ø 119 1,415 700204
ISORohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 68 39 Ø 25 0,195 700221
DN010 17,2 x 1,6 17,2 14,0 68 39 Ø 25 0,185 700203
DN015 21,3 x 1,6 21,3 18,1 68 63 Ø 50,5 0,430 700207
DN020 26,9 x 1,6 26,9 23,7 68 63 Ø 50,5 0,420 700209
DN025 33,7 x 2,0 33,7 29,7 76 63 Ø 50,5 0,425 700211
DN032 42,4 x 2,0 42,4 38,4 76 76 Ø 50,5 0,400 700213
DN040 48,3 x 2,0 48,3 44,3 76 76 Ø 64 0,575 700215
DN050 60,3 x 2,0 60,3 56,3 76 90 Ø 77,5 0,730 700217
DN065 76,1 x 2,0 76,1 72,1 96 104 Ø 91 0,885 700220
DN080 88,9 x 2,3 88,9 84,3 96 118 Ø 106 1,160 700223
DN100 114,3 x 2,3 114,3 109,7 96 145 Ø 130 1,680 700205
2.5
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Clampstutzen mit Vorsprung | aseptic clamp with projection
DINRohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 35 Ø 25 0,020 700196
DN008 10 x 1,0 10 8 35 Ø 25 0,025 705241
DN010 12 x 1,0 12 10 35 Ø 25 0,025 700180
DN015 19 x 1,5 19 16 35 Ø 25 0,030 700184
DN020 23 x 1,5 23 20 35 Ø 50,5 0,090 700186
DN025 29 x 1,5 29 26 39 Ø 50,5 0,090 700188
DN032 35 x 1,5 35 32 39 Ø 50,5 0,085 700190
DN040 41 x 1,5 41 38 39 Ø 64 0,130 700192
DN050 53 x 1,5 53 50 39 Ø 77,5 0,180 700194
DN065 70 x 2,0 70 66 49 Ø 91 0,205 700197
DN080 85 x 2,0 85 81 49 Ø 106 0,375 700200
DN100 104 x 2,0 104 100 49 Ø 119 0,500 700182
ISORohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 35 Ø 25 0,025 700199
DN010 17,2 x 1,6 17,2 14,0 35 Ø 25 0,020 700181
DN015 21,3 x 1,6 21,3 18,1 35 Ø 50,5 0,095 700185
DN020 26,9 x 1,6 26,9 23,7 35 Ø 50,5 0,090 700187
DN025 33,7 x 2,0 33,7 29,7 39 Ø 50,5 0,100 700189
DN032 42,4 x 2,0 42,4 38,4 39 Ø 50,5 0,090 700191
DN040 48,3 x 2,0 48,3 44,3 39 Ø 64 0,135 700193
DN050 60,3 x 2,0 60,3 56,3 39 Ø 77,5 0,185 700195
DN065 76,1 x 2,0 76,1 72,1 49 Ø 91 0,210 700198
DN080 88,9 x 2,3 88,9 84,3 49 Ø 106 0,385 700201
DN100 114,3 x 2,3 114,3 109,7 49 Ø 130 0,510 700183
STERI-Connect©2.5
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Connect©
Steril-Clampstutzen mit Rücksprung | aseptic clamp with backward move
DINRohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 35 Ø 25 0,020 705242
DN008 10 x 1,0 10 8 35 Ø 25 0,025 700174
DN010 12 x 1,0 12 10 35 Ø 25 0,025 700158
DN015 19 x 1,5 19 16 35 Ø 25 0,030 700162
DN020 23 x 1,5 23 20 35 Ø 50,5 0,110 700164
DN025 29 x 1,5 29 26 39 Ø 50,5 0,100 700166
DN032 35 x 1,5 35 32 39 Ø 50,5 0,090 700168
DN040 41 x 1,5 41 38 39 Ø 64 0,150 700170
DN050 53 x 1,5 53 50 39 Ø 77,5 0,205 700172
DN065 70 x 2,0 70 66 49 Ø 91 0,295 700175
DN080 85 x 2,0 85 81 49 Ø 106 0,355 700178
DN100 104 x 2,0 104 100 49 Ø 119 0,420 700160
ISORohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 35 Ø 25 0,025 700177
DN010 17,2 x 1,6 17,2 14,0 35 Ø 25 0,020 700159
DN015 21,3 x 1,6 21,3 18,1 35 Ø 50,5 0,120 700163
DN020 26,9 x 1,6 26,9 23,7 35 Ø 50,5 0,115 700165
DN025 33,7 x 2,0 33,7 29,7 39 Ø 50,5 0,110 700167
DN032 42,4 x 2,0 42,4 38,4 39 Ø 50,5 0,095 700169
DN040 48,3 x 2,0 48,3 44,3 39 Ø 64 0,145 700171
DN050 60,3 x 2,0 60,3 56,3 39 Ø 77,5 0,195 700173
DN065 76,1 x 2,0 76,1 72,1 49 Ø 91 0,280 700176
DN080 88,9 x 2,3 88,9 84,3 49 Ø 106 0,340 700179
DN100 114,3 x 2,3 114,3 109,7 49 Ø 130 0,590 700161
2.5
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindclampstutzen mit Vorsprung | aseptic blind clamp with projection
DINRohr-Øtube-Ø C E kg
Art.-Nr.item No
DN006 8 x 1,0 8 Ø 25 0,020 700154
DN008 10 x 1,0 8 Ø 25 0,020 700156
DN010 12 x 1,0 8 Ø 25 0,020 700146
DN015 19 x 1,5 8 Ø 25 0,025 700148
DN020 23 x 1,5 10 Ø 50,5 0,105 700149
DN025 29 x 1,5 10 Ø 50,5 0,100 700150
DN032 35 x 1,5 10 Ø 50,5 0,100 700151
DN040 41 x 1,5 10 Ø 64 0,115 700152
DN050 53 x 1,5 10 Ø 77,5 0,180 700153
DN065 70 x 2,0 10 Ø 91 0,385 700155
DN080 85 x 2,0 11 Ø 106 0,880 700157
DN100 104 x 2,0 11 Ø 119 0,995 700147
ISORohr-Øtube-Ø C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 8 Ø 25 0,020 704971
DN010 17,2 x 1,6 8 Ø 25 0,020 705281
DN015 21,3 x 1,6 8 Ø 50,5 0,080 705282
DN020 26,9 x 1,6 10 Ø 50,5 0,105 705283
DN025 33,7 x 2,0 10 Ø 50,5 0,100 705284
DN032 42,4 x 2,0 10 Ø 50,5 0,100 705285
DN040 48,3 x 2,0 10 Ø 64 0,115 705286
DN050 60,3 x 2,0 10 Ø 77,5 0,180 705287
DN065 76,1 x 2,0 10 Ø 91 0,380 705288
DN080 88,9 x 2,3 11 Ø 106 0,875 705289
DN100 114,3 x 2,3 11 Ø 130 0,980 705290
STERI-Connect©
weitere Abmessungen auf Anfrage | more dimensions on demand
2.5
Steril-Blindclampstutzen mit Rücksprung | aseptic blind clamp with backward move
DINRohr-Øtube-Ø C E kg
Art.-Nr.item No
DN006 8 x 1,0 8 Ø 25 0,020 700142
DN008 10 x 1,0 8 Ø 25 0,020 700144
DN010 12 x 1,0 8 Ø 25 0,020 700134
DN015 19 x 1,5 8 Ø 25 0,025 700136
DN020 23 x 1,5 10 Ø 50,5 0,125 700137
DN025 29 x 1,5 10 Ø 50,5 0,120 700138
DN032 35 x 1,5 10 Ø 50,5 0,120 700139
DN040 41 x 1,5 10 Ø 64 0,160 700140
DN050 53 x 1,5 10 Ø 77,5 0,230 700141
DN065 70 x 2,0 10 Ø 91 0,455 700143
DN080 85 x 2,0 11 Ø 106 0,915 700145
DN100 104 x 2,0 11 Ø 119 1,010 700135
ISORohr-Øtube-Ø C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 8 Ø 25 0,020 704972
DN010 17,2 x 1,6 8 Ø 25 0,020 704957
DN015 21,3 x 1,6 8 Ø 50,5 0,100 703066
DN020 26,9 x 1,6 10 Ø 50,5 0,125 705274
DN025 33,7 x 2,0 10 Ø 50,5 0,125 705275
DN032 42,4 x 2,0 10 Ø 50,5 0,120 705276
DN040 48,3 x 2,0 10 Ø 64 0,150 705277
DN050 60,3 x 2,0 10 Ø 77,5 0,225 703065
DN065 76,1 x 2,0 10 Ø 91 0,435 705278
DN080 88,9 x 2,3 11 Ø 106 0,900 705279
DN100 114,3 x 2,3 11 Ø 130 0,990 705280
STERI-Connect© 2.5
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Clampverbindung | aseptic clamp connection2.6
Steril-Clampverbindung DIN 11864-3-A-N, gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435/1.4404 (Blind-) Nut-/ Bundclampstutzen1.4308 ClampklammerEPDM-FDA Dichtring
aseptic clamp connection DIN 11864-3-A-N, made of tubular steel according to DIN EN 10088-3,blanks acc. to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L (blind) round-/ groove clamp304 clamp ringEPDM-FDA seal
Zubehör siehe 2.8
accessories refer to 2.8
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE Flansch-Außendurchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE outer fl ange diameter
DIN 11864-3-A-N
ISORohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 76 43 Ø 34 0,325 704842
DN010 17,2 x 1,6 17,2 14,0 76 43 Ø 34 0,345 704843
DN015 21,3 x 1,6 21,3 18,1 78 43 Ø 34 0,435 704844
DN020 26,9 x 1,6 26,9 23,7 78 57 Ø 50,5 0,570 704845
DN025 33,7 x 2,0 33,7 29,7 88 57 Ø 50,5 0,665 704846
DN032 42,4 x 2,0 42,4 38,4 88 73 Ø 64 0,855 704847
DN040 48,3 x 2,0 48,3 44,3 90 73 Ø 64 0,935 704848
DN050 60,3 x 2,0 60,3 56,3 114 99 Ø 91 1,425 704849
DN065 76,1 x 2,0 76,1 72,1 117 118 Ø 106 1,765 704850
DN080 88,9 x 2,3 88,9 84,3 122 127 Ø 119 2,165 704851
DN100 114,3 x 2,3 114,3 109,7 130 155 Ø 144,4 3,335 704852
ASME-BPE
Rohr-Øtube-Ø A B C D E kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 76 43 Ø 34 0,305 704834
DN ¾” 19,05 x 1,65 19,05 15,75 76 43 Ø 34 0,395 704835
DN 1” 25,4 x 1,65 25,4 22,1 77 57 Ø 50,5 0,530 704836
DN 1½” 38,1 x 1,65 38,1 34,8 88 73 Ø 64 0,775 704837
DN 2” 50,8 x 1,65 50,8 47,5 89 89 Ø 77,5 1,020 704838
DN 2½” 63,5 x 1,65 63,5 60,2 115 99 Ø 91 1,380 704839
DN 3” 76,2 x 1,65 76,2 72,9 117 118 Ø 106 1,685 704840
DN 4” 101,6 x 2,11 101,6 97,38 119 145 Ø 130 2,590 704841
2.6
Steril-Clampverbindung | aseptic clamp connection
DINRohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 43 Ø 34 76 0,285 704824 706098 32 0,230 706108
DN015 19 x 1,5 19 16 43 Ø 34 76 0,285 704825 706099 32 0,225 706109
DN020 23 x 1,5 23 20 57 Ø 50,5 76 0,525 704826 706100 34 0,370 706110
DN025 29 x 1,5 29 26 57 Ø 50,5 77 0,495 704827 706101 42 0,355 706111
DN032 35 x 1,5 35 32 57 Ø 50,5 88 0,580 704828 706102 48 0,355 706112
DN040 41 x 1,5 41 38 73 Ø 64 88 0,700 704829 706103 50 0,495 706113
DN050 53 x 1,5 53 50 89 Ø 77,5 89 0,830 704830 706104 54 0,620 706114
DN065 70 x 2,0 70 66 99 Ø 91 113 1,130 704831 706105 62 0,765 706115
DN080 85 x 2,0 85 81 118 Ø 106 117 1,400 704832 706106 72 0,905 706116
DN100 104 x 2,0 104 100 145 Ø 130 120 2,045 704833 706107 86 1,150 706117
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11864-3-A-N
Steril-Bundclampstutzen | aseptic round clamp
DINRohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.item No
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 Ø 34 38,0 0,060 704740 706137 16 0,030 706147
DN015 19 x 1,5 19 16 Ø 34 38,0 0,060 704308 706138 16 0,030 706148
DN020 23 x 1,5 23 20 Ø 50,5 38,0 0,140 704309 706139 17 0,070 706149
DN025 29 x 1,5 29 26 Ø 50,5 38,5 0,125 704310 706140 21 0,060 706150
DN032 35 x 1,5 35 32 Ø 50,5 44,0 0,185 704741 706141 24 0,065 706151
DN040 41 x 1,5 41 38 Ø 64 44,0 0,200 704742 706142 25 0,090 706152
DN050 53 x 1,5 53 50 Ø 77,5 44,5 0,240 704743 706143 27 0,130 706153
DN065 70 x 2,0 70 66 Ø 91 56,5 0,355 704744 706144 31 0,180 706154
DN080 85 x 2,0 85 81 Ø 106 58,5 0,470 704745 706145 36 0,230 706155
DN100 104 x 2,0 104 100 Ø 130 60,0 0,725 704746 706146 42 0,280 706156
ISORohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 38,0 Ø 34 0,070 704586
DN010 17,2 x 1,6 17,2 14,0 38,0 Ø 34 0,080 704755
DN015 21,3 x 1,6 21,3 18,1 39,0 Ø 34 0,120 704756
DN020 26,9 x 1,6 26,9 23,7 39,0 Ø 50,5 0,160 704757
DN025 33,7 x 2,0 33,7 29,7 44,0 Ø 50,5 0,210 704758
DN032 42,4 x 2,0 42,4 38,4 44,0 Ø 64 0,255 704559
DN040 48,3 x 2,0 48,3 44,3 45,0 Ø 64 0,285 704759
DN050 60,3 x 2,0 60,3 56,3 57,0 Ø 91 0,480 704760
DN065 76,1 x 2,0 76,1 72,1 58,5 Ø 106 0,625 704761
DN080 88,9 x 2,3 88,9 84,3 61,0 Ø 119 0,780 704762
DN100 114,3 x 2,3 114,3 109,7 65,0 Ø 144,4 1,220 704763
ASME-BPE
Rohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 38,0 Ø 34 0,060 704747
DN ¾” 19,05 x 1,65 19,05 15,75 38,0 Ø 34 0,100 704748
DN 1” 25,4 x 1,65 25,4 22,1 38,5 Ø 50,5 0,140 704749
DN 1½” 38,1 x 1,65 38,1 34,8 44,0 Ø 64 0,220 704750
DN 2” 50,8 x 1,65 50,8 47,5 44,5 Ø 77,5 0,310 704751
DN 2½” 63,5 x 1,65 63,5 60,2 57,5 Ø 91 0,455 704752
DN 3” 76,2 x 1,65 76,2 72,9 58,5 Ø 106 0,580 704753
DN 4” 101,6 x 2,11 101,6 97,38 59,5 Ø 130 0,985 704754
2.6
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Nutclampstutzen | aseptic groove clamp
DINRohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
item No1.4404
Ckurz
kgshort
Art.-Nr.1.4404
DN010 13 x 1,5 13 10 Ø 34 39,5 0,060 704775 706118 18 0,035 706127
DN015 19 x 1,5 19 16 Ø 34 39,5 0,060 704776 706119 18 0,030 706128
DN020 23 x 1,5 23 20 Ø 50,5 39,5 0,170 704777 706120 19 0,085 706129
DN025 29 x 1,5 29 26 Ø 50,5 40,0 0,155 704778 705127 23 0,080 706130
DN032 35 x 1,5 35 32 Ø 50,5 45,5 0,180 704779 706121 26 0,075 706131
DN040 41 x 1,5 41 38 Ø 64 45,5 0,205 704780 706122 27 0,110 706132
DN050 53 x 1,5 53 50 Ø 77,5 46,0 0,240 704781 706123 29 0,140 706133
DN065 70 x 2,0 70 66 Ø 91 58,0 0,380 704782 706124 33 0,190 706134
DN080 85 x 2,0 85 81 Ø 106 60,0 0,495 704783 706125 38 0,240 706135
DN100 104 x 2,0 104 100 Ø 130 61,5 0,740 704784 706126 45 0,290 706136
ISORohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 39,5 Ø 34 0,090 704585
DN010 17,2 x 1,6 17,2 14,0 39,5 Ø 34 0,100 704765
DN015 21,3 x 1,6 21,3 18,1 40,5 Ø 34 0,150 704766
DN020 26,9 x 1,6 26,9 23,7 40,5 Ø 50,5 0,195 704767
DN025 33,7 x 2,0 33,7 29,7 45,5 Ø 50,5 0,240 704768
DN032 42,4 x 2,0 42,4 38,4 45,5 Ø 64 0,305 704769
DN040 48,3 x 2,0 48,3 44,3 46,5 Ø 64 0,355 704770
DN050 60,3 x 2,0 60,3 56,3 58,5 Ø 91 0,550 704771
DN065 76,1 x 2,0 76,1 72,1 60,0 Ø 106 0,705 704772
DN080 88,9 x 2,3 88,9 84,3 62,5 Ø 119 0,890 704773
DN100 114,3 x 2,3 114,3 109,7 66,5 Ø 144,4 1,345 704774
ASME-BPE
Rohr-Øtube-Ø A B C E kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 39,5 Ø 34 0,080 704785
DN ¾” 19,05 x 1,65 19,05 15,75 39,5 Ø 34 0,130 704786
DN 1” 25,4 x 1,65 25,4 22,1 40,5 Ø 50,5 0,175 704787
DN 1½” 38,1 x 1,65 38,1 34,8 45,5 Ø 64 0,260 704788
DN 2” 50,8 x 1,65 50,8 47,5 46,0 Ø 77,5 0,360 704789
DN 2½” 63,5 x 1,65 63,5 60,2 59,0 Ø 91 0,530 704790
DN 3” 76,2 x 1,65 76,2 72,9 60,0 Ø 106 0,670 704791
DN 4” 101,6 x 2,11 101,6 97,38 61,0 Ø 130 1,110 704792
DIN 11864-3-A-N 2.6
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindbundclamp | aseptic blind round clamp
DINRohr-Øtube-Ø C E kg
Art.-Nr.1.4435
item No1.4404
DN010 13 x 1,5 10 Ø 34 0,040 704795 706167
DN015 19 x 1,5 10 Ø 34 0,040 704796 706168
DN020 23 x 1,5 10 Ø 50,5 0,085 704797 706169
DN025 29 x 1,5 10 Ø 50,5 0,085 704798 706170
DN032 35 x 1,5 10 Ø 50,5 0,085 704799 706171
DN040 41 x 1,5 10 Ø 64 0,140 704800 706172
DN050 53 x 1,5 10 Ø 77,5 0,200 704801 706173
DN065 70 x 2,0 10 Ø 91 0,270 704802 706174
DN080 85 x 2,0 12 Ø 106 0,385 704803 706175
DN100 104 x 2,0 14 Ø 130 0,500 704804 706176
ISORohr-Øtube-Ø C E kg
Art.-Nr. | item No1.4435
DN008 13,5 x 1,6 10 Ø 34 0,040 704813
DN010 17,2 x 1,6 10 Ø 34 0,040 704814
DN015 21,3 x 1,6 10 Ø 34 0,040 704815
DN020 26,9 x 1,6 10 Ø 50,5 0,085 704816
DN025 33,7 x 2,0 10 Ø 50,5 0,085 704817
DN032 42,4 x 2,0 10 Ø 64 0,140 704818
DN040 48,3 x 2,0 10 Ø 64 0,140 704819
DN050 60,3 x 2,0 10 Ø 91 0,270 704820
DN065 76,1 x 2,0 12 Ø 106 0,385 704821
DN080 88,9 x 2,3 12 Ø 119 0,500 704822
DN100 114,3 x 2,3 14 Ø 144,4 0,710 704823
ASME-BPE
Rohr-Øtube-Ø C E kg
Art.-Nr. | item No1.4435
DN ½” 12,7 x 1,65 10 Ø 34 0,040 704805
DN ¾” 19,05 x 1,65 10 Ø 34 0,040 704806
DN 1” 25,4 x 1,65 10 Ø 50,5 0,085 704807
DN 1½” 38,1 x 1,65 10 Ø 64 0,140 704808
DN 2” 50,8 x 1,65 10 Ø 77,5 0,200 704809
DN 2½” 63,5 x 1,65 10 Ø 91 0,270 704810
DN 3” 76,2 x 1,65 12 Ø 106 0,385 704811
DN 4” 101,6 x 2,11 14 Ø 130 0,500 704812
DIN 11864-3-A-N2.6
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Blindnutclamp | aseptic blind groove clamp
DINRohr-Øtube-Ø C E kg
Art.-Nr.1.4435
item No1.4404
DN010 13 x 1,5 11,5 Ø 34 0,050 704853 706157
DN015 19 x 1,5 11,5 Ø 34 0,050 704854 706158
DN020 23 x 1,5 11,5 Ø 50,5 0,100 704855 706159
DN025 29 x 1,5 11,5 Ø 50,5 0,100 704856 706160
DN032 35 x 1,5 11,5 Ø 50,5 0,100 704857 706161
DN040 41 x 1,5 11,5 Ø 64 0,155 704858 706162
DN050 53 x 1,5 11,5 Ø 77,5 0,220 704859 706163
DN065 70 x 2,0 11,5 Ø 91 0,285 704860 706164
DN080 85 x 2,0 13,5 Ø 106 0,410 704861 706165
DN100 104 x 2,0 15,5 Ø 130 0,530 704862 706166
ISORohr-Øtube-Ø C E kg
Art.-Nr. | item No1.4435
DN008 13,5 x 1,6 11,5 Ø 34 0,050 704871
DN010 17,2 x 1,6 11,5 Ø 34 0,050 704872
DN015 21,3 x 1,6 11,5 Ø 34 0,050 704873
DN020 26,9 x 1,6 11,5 Ø 50,5 0,100 704874
DN025 33,7 x 2,0 11,5 Ø 50,5 0,100 704875
DN032 42,4 x 2,0 11,5 Ø 64 0,155 704876
DN040 48,3 x 2,0 11,5 Ø 64 0,155 704877
DN050 60,3 x 2,0 11,5 Ø 91 0,285 704878
DN065 76,1 x 2,0 13,5 Ø 106 0,410 704879
DN080 88,9 x 2,3 13,5 Ø 119 0,530 704880
DN100 114,3 x 2,3 15,5 Ø 144,4 0,745 704881
ASME-BPE
Rohr-Øtube-Ø C E kg
Art.-Nr. | item No1.4435
DN ½” 12,7 x 1,65 11,5 Ø 34 0,050 704863
DN ¾” 19,05 x 1,65 11,5 Ø 34 0,050 704864
DN 1” 25,4 x 1,65 11,5 Ø 50,5 0,100 704865
DN 1½” 38,1 x 1,65 11,5 Ø 64 0,155 704866
DN 2” 50,8 x 1,65 11,5 Ø 77,5 0,220 704867
DN 2½” 63,5 x 1,65 11,5 Ø 91 0,285 704868
DN 3” 76,2 x 1,65 13,5 Ø 106 0,410 704869
DN 4” 101,6 x 2,11 15,5 Ø 130 0,530 704870
DIN 11864-3-A-N 2.6
weitere Abmessungen auf Anfrage | more dimensions on demand
Clampverbindung | clamp connection2.7
Clampverbindung (ähnlich) DIN 32676, gefertigt aus Rundstahl nach DIN EN 10088-3, bzw. Rohlingen nach DIN EN 10222-5 Tab. 1 Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoffe (DIN)
1.4435/1.4404 (Blind-) Clampstutzen1.4308 ClampklammerEPDM-FDA Clampdichtung
clamp connection (similar) DIN 32676,made of tubular steel according to DIN EN 10088-3, blanks acc. to DIN EN 10222-5 tab. 1 respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
materials (AISI)
316L ferrule / blind clamp304 clamp ringEPDM-FDA TC-gasket
Zubehör siehe 2.8
accessories refer to 2.8
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE Flansch-Außendurchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE outer fl ange diameter
Clampverbindung | clamp connection
DINRohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN010 12 x 1,0 12 10 43 Ø 34 72 0,235 705667 38 0,225 705965
DN010 13 x 1,5 13 10 43 Ø 34 72 0,245 700931 38 0,225 705966
DN015 19 x 1,5 19 16 43 Ø 34 72 0,245 700932 38 0,225 705967
DN020 23 x 1,5 23 20 43 Ø 34 72 0,245 700933 38 0,225 705968
DN025 29 x 1,5 29 26 57 Ø 50,5 81 0,385 700934 46 0,315 705969
DN032 35 x 1,5 35 32 57 Ø 50,5 81 0,375 700935 46 0,315 705970
DN040 41 x 1,5 41 38 57 Ø 50,5 81 0,365 700936 46 0,315 705971
DN050 53 x 1,5 53 50 73 Ø 64 85 0,515 700937 46 0,435 705972
DN065 70 x 2,0 70 66 99 Ø 91 102 0,835 700938 60 0,755 705973
DN080 85 x 2,0 85 81 118 Ø 106 102 1,055 700939 60 0,835 705974
DN100 104 x 2,0 104 100 127 Ø 119 102 1,195 700940 60 0,935 705975
DN125 129 x 2,0 129 125 159 Ø 155 102 2,550 706082 60 2,320 706085
DN150 154 x 2,0 154 150 187 Ø 183 102 3,115 706083 60 2,875 706086
DN200 204 x 2,0 204 200 238 Ø 233,5 102 3,770 706084 60 3,420 706087
ISORohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN008 13,5 x 1,6 13,5 10,3 43 Ø 34 72 0,245 705487 38 0,225 705976
DN010 17,2 x 1,6 17,2 14,0 43 Ø 34 72 0,255 702431 38 0,225 705977
DN015 21,3 x 1,6 21,3 18,1 43 Ø 34 72 0,245 702439 38 0,225 705978
DN020 26,9 x 1,6 26,9 23,7 57 Ø 50,5 81 0,395 702438 46 0,315 705979
DN025 33,7 x 2,0 33,7 29,7 57 Ø 50,5 81 0,405 702437 46 0,325 705980
DN032 42,4 x 2,0 42,4 38,4 57 Ø 50,5 81 0,395 702436 46 0,315 705981
DN040 48,3 x 2,0 48,3 44,3 73 Ø 64 85 0,555 702435 46 0,465 705982
DN050 60,3 x 2,0 60,3 56,3 89 Ø 77,5 89 0,710 702434 59 0,590 705983
DN065 76,1 x 2,0 76,1 72,1 99 Ø 91 102 0,885 702433 59 0,695 705984
DN080 88,9 x 2,3 88,9 84,3 118 Ø 106 102 1,085 702432 60 0,825 705985
DN100 114,3 x 2,3 114,3 109,7 145 Ø 130 102 1,360 702440 60 1,070 705986
ASME-BPE
Rohr-Øtube-Ø A B D E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN ½” 12,7 x 1,65 12,7 9,4 33 Ø 25 72 0,195 703987 45 0,185 705987
DN ¾” 19,05 x 1,65 19,05 15,75 33 Ø 25 72 0,205 703988 45 0,195 705988
DN 1” 25,4 x 1,65 25,4 22,1 57 Ø 50,5 81 0,405 703989 46 0,325 705989
DN 1½” 38,1 x 1,65 38,1 34,8 57 Ø 50,5 81 0,375 703990 46 0,315 705990
DN 2” 50,8 x 1,65 50,8 47,5 73 Ø 64 85 0,525 703991 46 0,435 705991
DN 2½” 63,5 x 1,65 63,5 60,2 89 Ø 77,5 89 0,695 703992 60 0,515 705992
DN 3” 76,2 x 1,65 76,2 72,9 99 Ø 91 102 0,845 705489 60 0,755 705993
DN 4” 101,6 x 2,11 101,6 97,38 127 Ø 119 102 1,215 705490 60 0,975 705994
(similiar | ähnlich) DIN 32676 2.7
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 32676 (ähnlich | similiar)
Clampstutzen | ferrule
DINRohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN010 12 x 1,0 12 10 Ø 34 35 0,035 701776 18,0 0,030 700871
DN010 13 x 1,5 13 10 Ø 34 35 0,040 703938 18,0 0,030 705455
DN015 19 x 1,5 19 16 Ø 34 35 0,040 702457 18,0 0,030 700872
DN020 23 x 1,5 23 20 Ø 34 35 0,040 702458 18,0 0,030 700873
DN025 29 x 1,5 29 26 Ø 50,5 39 0,085 701786 21,5 0,050 700874
DN032 35 x 1,5 35 32 Ø 50,5 39 0,080 700865 21,5 0,050 700875
DN040 41 x 1,5 41 38 Ø 50,5 39 0,075 702477 21,5 0,050 700876
DN050 53 x 1,5 53 50 Ø 64 41 0,110 700867 21,5 0,070 700877
DN065 70 x 2,0 70 66 Ø 91 49 0,220 700868 28,0 0,180 700878
DN080 85 x 2,0 85 81 Ø 106 49 0,310 700869 28,0 0,200 700879
DN100 104 x 2,0 104 100 Ø 119 49 0,330 700870 28,0 0,220 700880
DN125 129 x 2,0 129 125 Ø 155 49 0,625 706088 28,0 0,510 703497
DN150 154 x 2,0 154 150 Ø 183 49 0,790 706089 28,0 0,670 703553
DN200 204 x 2,0 204 200 Ø 233,5 49 0,875 706090 28,0 0,700 704460
ISORohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN008 13,5 x 1,6 13,5 10,3 Ø 34 35 0,040 702473 18,0 0,030 703127
DN010 17,2 x 1,6 17,2 14,0 Ø 34 35 0,045 702474 18,0 0,030 700921
DN015 21,3 x 1,6 21,3 18,1 Ø 34 35 0,040 700912 18,0 0,030 700922
DN020 26,9 x 1,6 26,9 23,7 Ø 50,5 39 0,090 700913 21,5 0,050 700923
DN025 33,7 x 2,0 33,7 29,7 Ø 50,5 39 0,095 700914 21,5 0,055 700924
DN032 42,4 x 2,0 42,4 38,4 Ø 50,5 39 0,090 700915 21,5 0,050 700925
DN040 48,3 x 2,0 48,3 44,3 Ø 64 41 0,130 702475 21,5 0,085 700926
DN050 60,3 x 2,0 60,3 56,3 Ø 77,5 43 0,180 700917 28,0 0,120 700927
DN065 76,1 x 2,0 76,1 72,1 Ø 91 49 0,245 700918 28,0 0,150 700928
DN080 88,9 x 2,3 88,9 84,3 Ø 106 49 0,325 700919 28,0 0,195 700929
DN100 114,3 x 2,3 114,3 109,7 Ø 130 49 0,390 700920 28,0 0,245 700930
ASME-BPE
Rohr-Øtube-Ø A B E
Clang
kglong
Art.-Nr.1.4435
Ckurz
kgshort
item No1.4404
DN ½” 12,7 x 1,65 12,7 9,4 Ø 25 35 0,025 704103 21,5 0,020 701599
DN ¾” 19,05 x 1,65 19,05 15,75 Ø 25 35 0,030 704104 21,5 0,025 701600
DN 1” 25,4 x 1,65 25,4 22,1 Ø 50,5 39 0,095 703969 21,5 0,055 701601
DN 1½” 38,1 x 1,65 38,1 34,8 Ø 50,5 39 0,080 702560 21,5 0,050 704001
DN 2” 50,8 x 1,65 50,8 47,5 Ø 64 41 0,115 702561 21,5 0,070 701603
DN 2½” 63,5 x 1,65 63,5 60,2 Ø 77,5 43 0,150 704258 28,0 0,110 704380
DN 3” 76,2 x 1,65 76,2 72,9 Ø 91 49 0,205 704537 28,0 0,160 704602
DN 4” 101,6 x 2,11 101,6 97,38 Ø 119 49 0,360 704538 28,0 0,240 704632
2.7
Blindclamp | blind clamp
C E kgArt.-Nr.1.4435
item No1.4404
6 Ø 25 0,015 700896 700881
6 Ø 34 0,030 700894 700882
6 Ø 50,5 0,080 701499 700884
6 Ø 64 0,120 701502 700887
6 Ø 77,5 0,195 701501 700886
7 Ø 91 0,310 701503 700888
8 Ø 106 0,465 701505 700889
8 Ø 119 0,575 700895 700890
8 Ø 130 0,740 705488 704925
12 Ø 155 1,480 703549 703550
12 Ø 183 2,115 706091 706093
12 Ø 233,5 3,195 706092 706094
(similiar | ähnlich) DIN 32676 2.7
weitere Abmessungen auf Anfrage | more dimensions on demand
Clampdichtung | TC-gasket
DINRohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton-PTFEitem No
DN010 13 x 1,5 700901 34,0 10,2 705456
DN015 19 x 1,5 700902 34,0 16,2 705457
DN020 23 x 1,5 700903 34,0 20,2 705458
DN025 29 x 1,5 700904 50,5 26,2 705459
DN032 35 x 1,5 700905 50,5 32,2 705460
DN040 41 x 1,5 700906 50,5 38,2 705461
DN050 53 x 1,5 700907 64,0 50,2 705462
DN065 70 x 2,0 700908 91,0 66,2 705463
DN080 85 x 2,0 700909 106,0 81,2 705464
DN100 104 x 2,0 700910 119,0 100,2 705465
DN125 129 x 2,0 703552 155,0 125,2 706095
DN150 154 x 2,0 703541 183,0 150,2 706096
DN200 204 x 2,0 703977 233,5 200,2 706097
ISORohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton-PTFEitem No
DN008 13,5 x 1,6 701785 34,0 10,3 705466
DN010 17,2 x 1,6 701787 34,0 14,0 705467
DN015 21,3 x 1,6 701788 34,0 18,1 705468
DN020 26,9 x 1,6 701789 50,5 23,7 705469
DN025 33,7 x 2,0 701790 50,5 29,7 705470
DN032 42,4 x 2,0 701791 50,5 38,4 705471
DN040 48,3 x 2,0 701792 64,0 44,3 705472
DN050 60,3 x 2,0 701793 77,5 56,3 705473
DN065 76,1 x 2,0 701794 91,0 72,1 705474
DN080 88,9 x 2,3 701795 106,0 84,9 705475
DN100 114,3 x 2,3 701796 130,0 110,3 705476
ASME-BPE
Rohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton-PTFEitem No
DN ½” 12,7 x 1,65 702441 21,8 9,5 705477
DN ¾” 19,05 x 1,65 702443 21,8 15,8 705478
DN 1” 25,4 x 1,65 702445 50,5 23,1 704610
DN 1½” 38,1 x 1,65 702447 50,5 35,3 704611
DN 2” 50,8 x 1,65 702449 64,0 48,0 704612
DN 2½” 63,5 x 1,65 702451 77,5 60,7 705479
DN 3” 76,2 x 1,65 702453 91,0 72,3 704613
DN 4” 101,6 x 2,11 702455 119,0 97,8 704614
½” / ¾”
DIN 32676 (ähnlich | similiar)2.7
Legende
A AußendurchmesserB Innendurchmesser
key
A outer diameterB inner diameter
Clampklammer (Standard) | clamp ring (standard), 1.4308/304
Druckpressure E C D D1 kg
Art.-Nr.item No
15 Ø 25 51 33 28 0,145 700891
15 Ø 34 70 43 37 0,165 700892
15 Ø 50,5 90 57 53 0,215 700893
15 Ø 64 106 73 66,5 0,295 700897
15 Ø 77,5 120 89 80 0,350 701504
10 Ø 91 135 99 93,5 0,395 700898
10 Ø 106 149 118 109 0,435 700899
10 Ø 119 162 127 121,5 0,495 700900
10 Ø 130 180 145 134 0,580 704546
10 Ø 144,4 200 158 148 0,770 705486
10 Ø 155 220 169 159 1,300 703551
10 Ø 183 250 197 187 1,535 702919
10 Ø 233,5 305 249 238 2,020 705720
Druck (bar) | pressure (bar)
clamp ring | Clampklammer 2.8
weitere Abmessungen auf Anfrage | more dimensions on demand
Legende
C GesamtlängeD größter DurchmesserD1 innerer Klammer-DurchmesserE Flansch-Außendurchmesser
key
C total lengthD biggest diameterD1 inner clamp ring diameterE outer fl ange diameter
Clampklammer (2-teilig) | clamp ring (two-part) 316/316L
Druckpressure E C D D1 kg
Art.-Nr.item No
50 Ø 25 59 36 28 0,140 705482
50 Ø 34 70 42 37 0,170 705483
50 Ø 50,5 87 59 53 0,240 705713
50 Ø 64 104 72 67 0,260 705714
50 Ø 77,5 113 89 80 0,350 705715
50 Ø 91 122 101 94 0,410 705716
50 Ø 106 145 116 109 0,430 705717
50 Ø 119 153 129 122 0,560 705718
50 Ø 130 175 144 133 0,580 705719
Clampklammer (schwer) | heavy duty clamp 1.4308/3043
Druckpressure E C D1 kg
Art.-Nr.item No
16 Ø 50,5 105 52 0,600 705484
16 Ø 64 115 65,5 0,720 704007
16 Ø 77,5 130 79 0,820 704019
16 Ø 91 140 92,5 0,915 704018
16 Ø 106 152 109 0,950 704017
16 Ø 119 165 120 1,000 705485
Druck (bar) | pressure (bar)
Clampklammer | clamp ring2.8
weitere Abmessungen auf Anfrage | more dimensions on demand
hexagonal screw set | Sechskantschraubensatz
Sechskantschraubensatz für Flanschverbindung DIN 11864-2-A-N
hexagonal screw set for aseptic fl ange connection DIN 11864-2-A-N
Abmessung | dimensionDIN / ISO / ASME
CSchraube
Dscrew
DMutter | nut
Anzahlnumber
Art.-Nr.item No
010-050 / 008-050 / ½”-2” 30 M8 M8 4 700944
065 / --- / 2½” 30 M8 M8 8 700945
--- / 065 / 3” 30 M10 M10 8 700947
080 / 080 / 4” 35 M10 M10 8 700948
100 / 100 / --- 40 M10 M10 8 700949
2.8
Sechskantschraubensatz für Flanschverbindung STERI-Connect©
hexagonal screw set for aseptic fl ange connection STERI-Connect©
Abmessung | dimensionDIN / ISO
CSchraube
Dscrew
DMutter | nut
Anzahlnumber
Art.-Nr.item No
008-040 / 008-040 30 M8 M8 4 700944
050 / 050 35 M8 M8 4 700946
065-080 / 065-080 40 M10 M10 4 700949
100 / 100 45 M10 M10 4 700950
Normen | standards
Schraube | screw DIN 933
Mutter | nut DIN 934
Legende
C GewindelängeD Gewinde
key
C length of threadD thread
Dichtring | seal
DINRohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton/FEPitem No
DN006 8 x 1,0 705218 6 2,0 nicht lieferbar
DN008 10 x 1,0 700970 8 2,0 not available
DN010 12 x 1,0 700954 11 2,5 705221
DN015 19 x 1,5 700958 17 2,5 705222
DN020 23 x 1,5 700960 21 2,5 705223
DN025 29 x 1,5 700962 27 3,0 705224
DN032 35 x 1,5 700964 33 3,0 705225
DN040 41 x 1,5 700966 39 3,0 705226
DN050 53 x 1,5 700968 51 3,0 705227
DN065 70 x 2,0 700971 67 3,0 705228
DN080 85 x 2,0 700975 82 3,0 705229
DN100 104 x 2,0 700956 100 3,0 704472
ISORohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton/FEPitem No
DN008 13,5 x 1,6 700974 11 2,0 705230
DN010 17,2 x 1,6 700955 15 2,5 705231
DN015 21,3 x 1,6 700959 19 2,5 705232
DN020 26,9 x 1,6 700961 24 2,5 705233
DN025 33,7 x 2,0 700963 30 3,0 705234
DN032 42,4 x 2,0 700965 39 3,0 705235
DN040 48,3 x 2,0 700967 45 3,0 705236
DN050 60,3 x 2,0 700969 57 3,0 705237
DN065 76,1 x 2,0 700972 72,5 3,0 705238
DN080 88,9 x 2,3 700976 85 3,0 705239
DN100 114,3 x 2,3 700957 109,5 3,0 705240
STERI-Connect© 2.8
weitere Abmessungen auf Anfrage | more dimensions on demand
Legende
A InnendurchmesserB Schnurstärke
key
A inner diameterB thickness of seal
Dichtring | seal
DINRohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton/FEPitem No
DN010 13 x 1,5 703297 12 3,5 705087
DN015 19 x 1,5 703298 18 3,5 704162
DN020 23 x 1,5 703299 22 3,5 705088
DN025 29 x 1,5 703300 28 3,5 704160
DN032 35 x 1,5 703301 34 5,0 705089
DN040 41 x 1,5 703302 40 5,0 704161
DN050 53 x 1,5 703303 52 5,0 704521
DN065 70 x 2,0 703304 68 5,0 704638
DN080 85 x 2,0 703305 83 5,0 705090
DN100 104 x 2,0 703306 102 5,0 704504
ISORohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton/FEPitem No
DN008 13,5 x 1,6 704739 12 3,5 705091
DN010 17,2 x 1,6 704738 16 3,5 705092
DN015 21,3 x 1,6 703307 20 3,5 705093
DN020 26,9 x 1,6 703308 26 3,5 705094
DN025 33,7 x 2,0 703309 32 5,0 705095
DN032 42,4 x 2,0 703310 40,5 5,0 705096
DN040 48,3 x 2,0 703311 46,5 5,0 704884
DN050 60,3 x 2,0 703312 58,5 5,0 704522
DN065 76,1 x 2,0 703313 73,5 5,0 705097
DN080 88,9 x 2,3 703314 86,5 5,0 705098
DN100 114,3 x 2,3 703887 111 5,0 701497
ASME-BPE
Rohr-Øtube-Ø
EPDMArt.-Nr. A B
Viton/FEPitem No
DN ½” 12,7 x 1,65 704737 12 3,5 705099
DN ¾” 19,05 x 1,65 704736 18 3,5 705100
DN 1” 25,4 x 1,65 703315 24 3,5 705101
DN 1½” 38,1 x 1,65 703316 37 5,0 705102
DN 2” 50,8 x 1,65 703317 50 5,0 705103
DN 2½” 63,5 x 1,65 703318 62 5,0 705104
DN 3” 76,2 x 1,65 703319 75 5,0 705105
DN 4” 101,6 x 2,11 703320 100 5,0 705106
DIN 11864 2.8
weitere Abmessungen auf Anfrage | more dimensions on demand
S-Nippel | nipple
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeDN Gewinde
key
A outer tube diameterB inner tube diameterC total lengthDN thread
S-Nippel (ähnlich) DIN 2982, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435
s-nipple (similar) DIN 2982, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µmoutside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding end covered with plastic cap,wrapped separately in plastic bag.
material (AISI)
316L
2.9
(similar | ähnlich) DIN 2982
Nippel, orbitalschweißfähig | nipple, for orbital welding
DINRohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN010 12 x 1,0 ¼” 12 10 40 0,015 701327
DN010 13 x 1,5 ³/8” 13 10 40 0,020 705078
DN015 19 x 1,5 ½” 19 16 50 0,035 701330
DN020 23 x 1,5 ¾” 23 20 50 0,055 701329
DN025 29 x 1,5 1” 29 26 50 0,065 701331
DN032 35 x 1,5 1¼” 35 32 58 0,100 701332
DN040 41 x 1,5 1½” 41 38 55 0,110 701333
DN050 53 x 1,5 2” 53 50 58 0,130 701334
ISORohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN008 13,5 x1,6 ¼” 13,5 10,3 40 0,025 703978
DN010 17,2 x 1,6 ³⁄8” 17,2 14,0 40 0,030 703979
DN015 21,3 x 1,6 ½” 21,3 18,1 40 0,060 703980
DN020 26,9 x 1,6 ¾” 26,9 23,7 58 0,070 703981
DN025 33,7 x 2,0 1” 33,7 29,7 58 0,090 703982
DN032 42,4 x 2,0 1¼” 42,4 38,4 58 0,105 703983
DN040 48,3 x 2,0 1½” 48,3 44,3 55 0,110 703984
DN050 60,3 x 2,0 2” 60,3 56,3 58 0,150 703985
ASME-BPE
Rohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 ¼” 12,7 9,4 40 0,025 705370
DN ¾” 19,05 x 1,65 ½” 19,05 15,75 40 0,040 705371
DN 1” 25,4 x 1,65 ¾” 25,4 22,1 45 0,060 705372
DN 1½” 38,1 x 1,65 1½” 38,1 34,8 55 0,105 705373
DN 2” 50,8 x 1,65 2” 50,8 47,5 58 0,125 705374
2.9
weitere Abmessungen auf Anfrage | more dimensions on demand
S-Muffe | sleeve2.10
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeDN Gewinde
key
A outer tube diameterB inner tube diameterC total lengthDN thread
S-Muffe ähnlich DIN 2986, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435
s-sleeve (similar) DIN 2986, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µmoutside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding end covered with plastic cap,wrapped separately in plastic bag.
material (AISI)
316L
(similar | ähnlich) DIN 2986
Muffe, orbitalschweißfähig | sleeve, for orbital welding
DINRohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN010 12 x 1,0 ¼” 12 10 40 0,030 701373
DN010 13 x 1,5 ³/8” 13 10 40 0,035 701374
DN015 19 x 1,5 ½” 19 16 40 0,050 701375
DN020 23 x 1,5 ¾” 23 20 45 0,075 701376
DN025 29 x 1,5 1” 29 26 50 0,125 701377
DN032 35 x 1,5 1¼” 35 32 58 0,165 701378
DN040 41 x 1,5 1½” 41 38 55 0,200 701379
DN050 53 x 1,5 2” 53 50 58 0,235 701380
ISORohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN008 13,5 x 1,6 ¼” 13,5 10,3 40 0,035 703448
DN010 17,2 x 1,6 ³/8” 17,2 14,0 40 0,040 703449
DN015 21,3 x 1,6 ½” 21,3 18,1 40 0,050 703095
DN020 26,9 x 1,6 ¾” 26,9 23,7 45 0,085 703451
DN025 33,7 x 2,0 1” 33,7 29,7 50 0,120 703452
DN032 42,4 x 2,0 1¼” 42,4 38,4 58 0,180 703453
DN040 48,3 x 2,0 1½” 48,3 44,3 55 0,200 703454
DN050 60,3 x 2,0 2” 60,3 56,3 58 0,240 703455
ASME-BPE
Rohr-Øtube-Ø DN A B C kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 ¼” 12,7 9,4 40 0,035 705390
DN ¾” 19,05 x 1,65 ½” 19,05 15,75 40 0,055 705391
DN 1” 25,4 x 1,65 ¾” 25,4 22,1 45 0,085 705392
DN 1½” 38,1 x 1,65 1½” 38,1 34,8 55 0,165 705393
DN 2” 50,8 x 1,65 2” 50,8 47,5 58 0,205 705394
2.10
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Cap©2.11
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC Gesamtlänge
key
A outer tube diameterB inner tube diameterC total length
Endkappe für Sterilrohre, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435
end cap for aseptic tubes, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µmoutside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding end covered with plastic cap,wrapped separately in plastic bag.
material (AISI)
316L
* auf Anfrage | on demand
end cap for tubes | Rohrendkappe
sterile Rohrendkappe, orbitalschweißfähig | aseptic end cap for tubes, for orbital welding
DINRohr-Øtube-Ø A B C kg
Art.-Nr.item No
DN006 8 x 1,0 8 6 25 0,010 704129
DN008 10 x 1,0 10 8 25 0,010 704130
DN010 12 x 1,0 12 10 25 0,015 704131
DN010 13 x 1,5 13 10 25 0,015 705398
DN015 19 x 1,5 19 16 25 0,035 704132
DN020 23 x 1,5 23 20 26 0,075 704021
DN025 29 x 1,5 29 26 30 0,115 704133
DN032 35 x 1,5 35 32 30 0,200 704022
DN040 41 x 1,5 41 38 31 0,220 704134
DN050 53 x 1,5 53 50 31 0,305 704135
DN065 70 x 2,0 70 66 41 0,955 704136
DN080 85 x 2,0 85 81 41 1,060 704137
DN100 104 x 2,0 104 100 41 1,295 703203
DN125 129 x 2,0 129 125 41 a. A.* 704138
DN150 154 x 2,0 154 150 41 a. A.* 704139
ISORohr-Øtube-Ø A B C kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 25 0,015 704140
DN010 17,2 x 1,6 17,2 14,0 25 0,025 704141
DN015 21,3 x 1,6 21,3 18,1 25 0,040 704142
DN020 26,9 x 1,6 26,9 23,7 25 0,080 703995
DN025 33,7 x 2,0 33,7 29,7 30 0,125 704117
DN032 42,4 x 2,0 42,4 38,4 30 0,195 704143
DN040 48,3 x 2,0 48,3 44,3 25 0,265 704144
DN050 60,3 x 2,0 60,3 56,3 31 0,400 704118
DN065 76,1 x 2,0 76,1 72,1 41 0,990 704145
DN080 88,9 x 2,3 88,9 84,3 41 1,355 704146
DN100 114,3 x 2,3 114,3 109,7 34 1,385 703913
DN125 139,7 x 2,6 139,7 134,5 41 a. A.* 704114
DN150 168,3 x 2,6 168,3 163,1 41 a. A.* 703967
ASME-BPE
Rohr-Øtube-Ø A B C kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 25 0,015 705328
DN ¾” 19,05 x 1,65 19,05 15,75 25 0,040 705329
DN 1” 25,4 x 1,65 25,4 22,1 30 0,105 705330
DN 1½” 38,1 x 1,65 38,1 34,8 30 0,145 705331
DN 2” 50,8 x 1,65 50,8 47,5 35 0,260 705332
DN 2½” 63,5 x 1,65 63,5 60,2 35 0,385 705333
DN 3” 76,2 x 1,65 76,2 72,9 40 1,030 705334
DN 4” 101,6 x 2,11 101,6 97,38 40 1,280 705335
2.11
weitere Abmessungen auf Anfrage | more dimensions on demand
reducers | Reduzierungen 3.
3. Reduzierungen | reducers
3.1 STERI-Red© K (konzentrisch | concentric) - DIN 11865-RK
3.2 STERI-Red© E (exzentrisch | eccentric) - DIN 11865-RE
3.3 Red-Stück K (konzentrisch | concentric) - DIN 11852-RK
3.4 Red-Stück E (exzentrisch | eccentric) - DIN 11852-RE
Legende
A/A1 Rohr-AußendurchmesserB/B1 Rohr-InnendurchmesserC Gesamtlänge
key
A/A1 outer tube diameterB/B1 inner tube diameterC total length
Steril-Reduzierung -konzentrisch-, DIN 11865-RK,gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435
aseptic reducer -concentric-, DIN 11865-RK, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
material (AISI)
316L
STERI-Red© K (konzentrisch | concentric)3.1
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11865 3.1
sterile Reduzierung (konzentrisch) | aseptic reducer (concentric)
DIN A B A1 B1 C kgArt.-Nr.item No
DN008 / DN006 10 8 8 6 38 0,010 703784
DN010 / DN008 12 10 10 8 38 0,015 702678
DN010 / DN008 13 10 10 8 38 0,015 705708
DN015 / DN008 19 16 10 8 60 0,045 702681
DN015 / DN010 19 16 12 10 60 0,035 702000
DN015 / DN010 19 16 13 10 60 0,040 703892
DN020 / DN010 23 20 12 10 60 0,050 702001
DN020 / DN010 23 20 13 10 60 0,045 703891
DN020 / DN015 23 20 19 16 60 0,050 702002
DN025 / DN010 29 26 12 10 70 0,085 702003
DN025 / DN010 29 26 13 10 70 0,090 703890
DN025 / DN015 29 26 19 16 70 0,085 702004
DN025 / DN020 29 26 23 20 70 0,080 702005
DN032 / DN010 35 32 12 10 80 0,130 702006
DN032 / DN010 35 32 13 10 80 0,140 705709
DN032 / DN015 35 32 19 16 80 0,175 702007
DN032 / DN020 35 32 23 20 80 0,150 702008
DN032 / DN025 35 32 29 26 80 0,120 702009
DN040 / DN010 41 38 13 10 90 0,230 704127
DN040 / DN015 41 38 19 16 90 0,195 702010
DN040 / DN020 41 38 23 20 90 0,180 702011
DN040 / DN025 41 38 29 26 90 0,175 702012
DN040 / DN032 41 38 35 32 90 0,150 702013
DN050 / DN015 53 50 19 16 90 0,235 702014
DN050 / DN020 53 50 23 20 90 0,315 702015
DN050 / DN025 53 50 29 26 90 0,285 702016
DN050 / DN032 53 50 35 32 90 0,220 702017
DN050 / DN040 53 50 41 38 90 0,245 702018
DN065 / DN020 70 66 23 20 110 0,390 702019
DN065 / DN025 70 66 29 26 110 0,370 702020
DN065 / DN032 70 66 35 32 110 0,380 702021
DN065 / DN040 70 66 41 38 110 0,390 702022
DN065 / DN050 70 66 53 50 110 0,500 702023
DN080 / DN025 85 81 29 26 110 0,340 703563
DN080 / DN032 85 81 35 32 110 0,370 702024
DN080 / DN040 85 81 41 38 110 0,445 702025
DN080 / DN050 85 81 53 50 110 0,495 702026
DN080 / DN065 85 81 70 66 110 0,655 702027
DN100 / DN025 104 100 29 26 135 0,605 702029
DN100 / DN032 104 100 35 32 135 0,635 702030
DN100 / DN040 104 100 41 38 135 0,580 702031
DN100 / DN050 104 100 53 50 135 0,545 702069
DN100 / DN065 104 100 70 66 135 0,585 702034
DN100 / DN080 104 100 85 81 135 0,990 702033
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 118653.1
sterile Reduzierung (konzentrisch) | aseptic reducer (concentric)
ISO A B A1 B1 C kgArt.-Nr.item No
DN010 / DN008 17,2 14,0 13,5 10,3 60 0,040 701859
DN015 / DN008 21,3 18,1 13,5 10,3 60 0,050 701819
DN015 / DN010 21,3 18,1 17,2 14,0 60 0,050 701818
DN020 / DN008 26,9 23,7 13,5 10,3 60 0,075 701820
DN020 / DN010 26,9 23,7 17,2 14,0 60 0,065 701821
DN020 / DN015 26,9 23,7 21,3 18,1 60 0,070 701822
DN025 / DN008 33,7 29,7 13,5 10,3 70 0,135 701823
DN025 / DN010 33,7 29,7 17,2 14,0 70 0,085 703855
DN025 / DN015 33,7 29,7 21,3 18,1 70 0,125 701825
DN025 / DN020 33,7 29,7 26,9 23,7 70 0,115 701826
DN032 / DN008 42,4 38,4 13,5 10,3 80 0,160 701902
DN032 / DN010 42,4 38,4 17,2 14,0 80 0,185 701828
DN032 / DN015 42,4 38,4 21,3 18,1 80 0,210 701829
DN032 / DN020 42,4 38,4 26,9 23,7 80 0,195 701903
DN032 / DN025 42,4 38,4 33,7 29,7 80 0,190 701831
DN040 / DN008 48,3 44,3 13,5 10,3 90 0,285 705042
DN040 / DN010 48,3 44,3 17,2 14,0 90 0,170 701905
DN040 / DN015 48,3 44,3 21,3 18,1 90 0,325 701833
DN040 / DN020 48,3 44,3 26,9 23,7 90 0,335 701906
DN040 / DN025 48,3 44,3 33,7 29,7 90 0,255 701835
DN040 / DN032 48,3 44,3 42,4 38,4 90 0,230 701836
DN050 / DN015 60,3 56,3 21,3 18,1 100 0,360 701837
DN050 / DN020 60,3 56,3 26,9 23,7 100 0,405 701838
DN050 / DN025 60,3 56,3 33,7 29,7 100 0,440 701839
DN050 / DN032 60,3 56,3 42,4 38,4 100 0,485 701840
DN050 / DN040 60,3 56,3 48,3 44,3 100 0,560 701841
DN065 / DN020 76,1 72,1 26,9 23,7 110 0,450 701843
DN065 / DN025 76,1 72,1 33,7 29,7 110 0,605 701844
DN065 / DN032 76,1 72,1 42,4 38,4 110 0,575 701845
DN065 / DN040 76,1 72,1 48,3 44,3 110 0,695 701846
DN065 / DN050 76,1 72,1 60,3 56,3 110 0,585 701847
DN080 / DN025 88,9 84,3 33,7 29,7 110 1,110 701848
DN080 / DN032 88,9 84,3 42,4 38,4 110 1,075 701849
DN080 / DN040 88,9 84,3 48,3 44,3 110 0,980 701850
DN080 / DN050 88,9 84,3 60,3 56,3 110 1,240 704126
DN080 / DN065 88,9 84,3 76,1 72,1 110 1,405 701851
DN100 / DN025 114,3 109,7 33,7 29,7 135 1,040 701853
DN100 / DN032 114,3 109,7 42,4 38,4 135 1,280 701854
DN100 / DN040 114,3 109,7 48,3 44,3 135 1,785 701855
DN100 / DN050 114,3 109,7 60,3 56,3 135 1,830 701856
DN100 / DN065 114,3 109,7 76,1 72,1 135 1,860 701857
DN100 / DN080 114,3 109,7 88,9 84,3 135 1,360 701858
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11865
sterile Reduzierung (konzentrisch) | aseptic reducer (concentric)
ASME- BPE A B A1 B1 C kg
Art.-Nr.item No
DN ¾” / DN ³⁄8” 19,05 15,75 9,53 7,75 60 0,035 705640
DN ¾” / DN ½” 19,05 15,75 12,7 9,4 60 0,040 702638
DN 1” / DN ½” 25,4 22,1 12,7 9,4 60 0,065 702640
DN 1” / DN ³⁄8” 25,4 22,1 9,53 7,75 60 0,050 705639
DN 1” / DN ¾” 25,4 22,1 19,05 15,75 60 0,050 702639
DN 1½” / DN ½” 38,1 34,8 12,7 9,4 80 0,230 705642
DN 1½” / DN ¾” 38,1 34,8 19,05 15,75 80 0,250 702642
DN 1½” / DN 1” 38,1 34,8 25,4 22,1 80 0,185 702641
DN 2” / DN ¾” 50,8 47,5 19,05 15,75 90 0,290 702645
DN 2” / DN 1” 50,8 47,5 25,4 22,1 90 0,335 702644
DN 2” / DN 1½” 50,8 47,5 38,1 34,8 90 0,230 702643
DN 2½” / DN 1” 63,5 60,2 25,4 22,1 100 0,490 702648
DN 2½” / DN 1½” 63,5 60,2 38,1 34,8 100 0,385 702647
DN 2½” / DN 2” 63,5 60,2 50,8 47,5 100 0,425 702646
DN 3” / DN 1” 76,2 72,9 25,4 22,1 110 0,535 702652
DN 3” / DN 1½” 76,2 72,9 38,1 34,8 110 0,440 702651
DN 3” / DN 2” 76,2 72,9 50,8 47,5 110 0,485 702650
DN 3” / DN 2½” 76,2 72,9 63,5 60,2 110 0,540 702649
DN 4” / DN 2” 101,6 97,38 50,8 34,8 135 0,910 702655
DN 4” / DN 2½” 101,6 97,38 63,5 47,5 135 1,085 702654
DN 4” / DN 3” 101,6 97,38 76,2 72,9 135 1,270 702653
3.1
weitere Abmessungen auf Anfrage | more dimensions on demand
Steril-Reduzierung -exzentrisch-, DIN 11865-RE, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435
aseptic reducer -eccentric-, DIN 11865-RE, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
material (AISI)
316L
STERI-Red© E (exzentrisch | eccentric)3.2
Legende
A/A1 Rohr-AußendurchmesserB/B1 Rohr-InnendurchmesserC Gesamtlänge
key
A/A1 outer tube diameterB/B1 inner tube diameterC total length
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
sterile Reduzierung (exzentrisch) | aseptic reducer (eccentric)
DIN A B A1 B1 C kgArt.-Nr.item No
DN008 / DN006 10 8 8 6 38 0,010 705995
DN010 / DN008 12 10 10 8 38 0,020 705996
DN010 / DN008 13 10 10 8 38 0,025 705997
DN015 / DN008 19 16 10 8 60 0,040 705998
DN015 / DN010 19 16 12 10 60 0,035 702041
DN015 / DN010 19 16 13 10 60 0,050 703860
DN020 / DN010 23 20 12 10 60 0,085 702042
DN020 / DN010 23 20 13 10 60 0,070 703862
DN020 / DN015 23 20 19 16 60 0,065 702043
DN025 / DN010 29 26 12 10 70 0,125 702044
DN025 / DN010 29 26 13 10 70 0,115 703861
DN025 / DN015 29 26 19 16 70 0,105 702045
DN025 / DN020 29 26 23 20 70 0,095 702046
DN032 / DN010 35 32 12 10 80 0,235 702047
DN032 / DN010 35 32 13 10 80 0,210 705999
DN032 / DN015 35 32 19 16 80 0,200 702048
DN032 / DN020 35 32 23 20 80 0,120 702049
DN032 / DN025 35 32 29 26 80 0,155 702492
DN040 / DN010 41 38 12 10 90 0,325 704035
DN040 / DN010 41 38 13 10 90 0,320 706000
DN040 / DN015 41 38 19 16 90 0,360 702097
DN040 / DN020 41 38 23 20 90 0,305 702052
DN040 / DN025 41 38 29 26 90 0,240 702098
DN040 / DN032 41 38 35 32 90 0,140 702099
DN050 / DN015 53 50 19 16 90 0,470 702100
DN050 / DN020 53 50 23 20 90 0,405 702056
DN050 / DN025 53 50 29 26 90 0,335 702057
DN050 / DN032 53 50 35 32 90 0,220 702058
DN050 / DN040 53 50 41 38 90 0,315 702059
DN065 / DN020 70 66 23 20 110 1,075 702060
DN065 / DN025 70 66 29 26 110 0,880 702061
DN065 / DN032 70 66 35 32 110 0,795 702062
DN065 / DN040 70 66 41 38 110 0,755 702140
DN065 / DN050 70 66 53 50 110 0,660 702064
DN080 / DN032 85 81 35 32 110 1,375 702101
DN080 / DN040 85 81 41 38 110 1,360 702102
DN080 / DN050 85 81 53 50 110 0,720 702103
DN080 / DN065 85 81 70 66 110 0,845 702104
DN100 / DN020 104 100 23 20 135 2,190 702035
DN100 / DN025 104 100 29 26 135 2,060 702036
DN100 / DN032 104 100 35 32 135 1,955 702037
DN100 / DN040 104 100 41 38 135 1,910 702038
DN100 / DN050 104 100 53 50 135 1,825 702070
DN100 / DN065 104 100 70 66 135 1,880 702039
DN100 / DN080 104 100 85 81 135 1,435 703565
DIN 11865 3.2
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11865
sterile Reduzierung (exzentrisch) | aseptic reducer (eccentric)
ISO A B A1 B1 C kgArt.-Nr.item No
DN010 / DN008 17,2 14,0 13,5 10,3 60 0,045 701867
DN015 / DN008 21,3 18,1 13,5 10,3 60 0,060 701868
DN015 / DN010 21,3 18,1 17,2 14,0 60 0,050 701951
DN020 / DN008 26,9 23,7 13,5 10,3 60 0,070 701871
DN020 / DN010 26,9 23,7 17,2 14,0 60 0,105 701869
DN020 / DN015 26,9 23,7 21,3 18,1 60 0,130 701870
DN025 / DN008 33,7 29,7 13,5 10,3 70 0,140 701875
DN025 / DN010 33,7 29,7 17,2 14,0 70 0,120 701872
DN025 / DN015 33,7 29,7 21,3 18,1 70 0,105 702491
DN025 / DN020 33,7 29,7 26,9 23,7 70 0,135 701874
DN032 / DN008 42,4 38,4 13,5 10,3 80 0,360 701880
DN032 / DN010 42,4 38,4 17,2 14,0 80 0,330 701876
DN032 / DN015 42,4 38,4 21,3 18,1 80 0,275 701877
DN032 / DN020 42,4 38,4 26,9 23,7 80 0,190 701878
DN032 / DN025 42,4 38,4 33,7 29,7 80 0,210 701879
DN040 / DN008 48,3 44,3 13,5 10,3 90 0,615 705030
DN040 / DN010 48,3 44,3 17,2 14,0 90 0,500 701881
DN040 / DN015 48,3 44,3 21,3 18,1 90 0,430 701882
DN040 / DN020 48,3 44,3 26,9 23,7 90 0,320 701883
DN040 / DN025 48,3 44,3 33,7 29,7 90 0,225 703911
DN040 / DN032 48,3 44,3 42,4 38,4 90 0,285 701885
DN050 / DN015 60,3 56,3 21,3 18,1 100 0,600 701886
DN050 / DN020 60,3 56,3 26,9 23,7 100 0,580 701887
DN050 / DN025 60,3 56,3 33,7 29,7 100 0,545 701888
DN050 / DN032 60,3 56,3 42,4 38,4 100 0,510 701889
DN050 / DN040 60,3 56,3 48,3 44,3 100 0,555 701890
DN065 / DN015 76,1 72,1 21,3 18,1 110 1,170 701891
DN065 / DN020 76,1 72,1 26,9 23,7 110 1,110 701892
DN065 / DN025 76,1 72,1 33,7 29,7 110 0,700 701893
DN065 / DN032 76,1 72,1 42,4 38,4 110 0,845 701894
DN065 / DN040 76,1 72,1 48,3 44,3 110 1,005 701895
DN065 / DN050 76,1 72,1 60,3 56,3 110 0,790 701896
DN080 / DN025 88,9 84,3 33,7 29,7 110 1,660 701897
DN080 / DN032 88,9 84,3 42,4 38,4 110 1,,390 701898
DN080 / DN040 88,9 84,3 48,3 44,3 110 1,445 701899
DN080 / DN050 88,9 84,3 60,3 56,3 110 1,050 701900
DN080 / DN065 88,9 84,3 76,1 72,1 110 1,235 701901
DN100 / DN025 114,3 109,7 33,7 29,7 135 2,185 701860
DN100 / DN032 114,3 109,7 42,4 38,4 135 2,120 701861
DN100 / DN040 114,3 109,7 48,3 44,3 135 2,075 701862
DN100 / DN050 114,3 109,7 60,3 56,3 135 1,990 701863
DN100 / DN065 114,3 109,7 76,1 72,1 135 2,040 701864
DN100 / DN080 114,3 109,7 88,9 84,3 135 1,770 701865
3.2
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11865
sterile Reduzierung (exzentrisch) | aseptic reducer (eccentric)
ASME-BPE A B A1 B1 C kg
Art.-Nr.item No
DN ¾” / DN ½” 19,05 15,75 12,7 9,4 60 0,045 702620
DN 1” / DN ½” 25,4 22,1 12,7 9,4 60 0,065 702622
DN 1” / DN ¾” 25,4 22,1 19,05 15,75 60 0,070 702621
DN 1½” / DN ½” 38,1 34,8 12,7 9,4 80 0,260 705638
DN 1½” / DN ¾” 38,1 34,8 19,05 15,75 80 0,225 702624
DN 1½” / DN 1” 38,1 34,8 25,4 22,1 80 0,190 702623
DN 2” / DN ¾” 50,8 47,5 19,05 15,75 90 0,420 702627
DN 2” / DN 1” 50,8 47,5 25,4 22,1 90 0,395 702626
DN 2” / DN 1½” 50,8 47,5 38,1 34,8 90 0,310 702625
DN 2½” / DN 1” 63,5 60,2 25,4 22,1 100 0,485 702630
DN 2½” / DN 1½” 63,5 60,2 38,1 34,8 100 0,475 702629
DN 2½” / DN 2” 63,5 60,2 50,8 47,5 100 0,460 702628
DN 3” / DN 1” 76,2 72,9 25,4 22,1 110 0,580 702634
DN 3” / DN 1½” 76,2 72,9 38,1 34,8 110 0,545 702633
DN 3” / DN 2” 76,2 72,9 50,8 47,5 110 0,495 702632
DN 3” / DN 2½” 76,2 72,9 63,5 60,2 110 0,380 702631
DN 4” / DN 2” 101,6 97,38 50,8 34,8 135 1,080 702637
DN 4” / DN 2½” 101,6 97,38 63,5 47,5 135 0,960 702636
DN 4” / DN 3” 101,6 97,38 76,2 72,9 135 0,885 702635
3.2
weitere Abmessungen auf Anfrage | more dimensions on demand
Red-Stück K
Reduzierstück -konzentrisch- DIN 11852-RK,hergestellt aus Rohren gemäß DIN 11866, bzw. DIN 17457 Tab. 6 K2G (EN 10217-7)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen (1.4435)
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
Oberfl ächen (1.4404)
innen: metallblank, gebeizt - Ra ≤ 0,8/1,6µmaußen: metallblank, gebeizt
Toleranzen
DIN EN ISO 1127
Verpackung
einzeln in Folienbeutel verpackt
Werkstoff (DIN) 1.4435/1.4404
reduction piece -concentric- DIN 11852-RK,made of tubes according to DIN 11866, DIN 17457 tab. 6 K2G (EN 10217-7) respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces (1.4435)
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
surfaces (1.4404)
inside: bright annealed, pickled - Ra ≤ 0,8/1,6µmoutside: bright annealed, pickled
tolerances
DIN EN ISO 1127
packaging
wrapped separately in plastic bag
material (AISI)
316L
3.3
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Wandstärke
key
A outer tube diameterB inner tube diameterC total lengthD wall thickness
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11852
Reduzierstück (konzentrisch) | reduction piece (concentric)
DIN A B C DArt.-Nr.1.4435
item No1.4404
DN015 / DN010 19 13 11,0 1,5 703685 702112
DN020 / DN010 23 13 18,0 1,5 703686 702113
DN020 / DN015 23 19 7,0 1,5 703687 702114
DN025 / DN010 29 13 30,0 1,5 703688 702115
DN025 / DN015 29 19 22,0 1,5 703689 702116
DN025 / DN020 29 23 11,0 1,5 703690 702117
DN032 / DN015 35 19 41,0 1,5 703692 702119
DN032 / DN020 35 23 33,0 1,5 703693 702120
DN032 / DN025 35 29 11,0 1,5 703694 702121
DN040 / DN015 41 19 41,0 1,5 703695 702122
DN040 / DN020 41 23 33,0 1,5 703696 702123
DN040 / DN025 41 29 22,0 1,5 703697 702124
DN040 / DN032 41 35 11,0 1,5 703698 702125
DN050 / DN020 53 23 55,5 1,5 703700 702127
DN050 / DN025 53 29 44,0 1,5 703701 702128
DN050 / DN032 53 35 33,0 1,5 703702 702129
DN050 / DN040 53 41 22,0 1,5 703703 702130
DN065 / DN025 70 29 74,5 2,0 703705 702132
DN065 / DN032 70 35 63,5 2,0 703706 702133
DN065 / DN040 70 41 51,0 2,0 703707 702134
DN065 / DN050 70 53 29,0 2,0 703708 702135
DN080 / DN032 85 35 91,5 2,0 703709 702136
DN080 / DN040 85 41 80,2 2,0 703710 702137
DN080 / DN050 85 53 56,0 2,0 703711 702138
DN080 / DN065 85 70 27,0 2,0 703712 702139
DN100 / DN025 104 29 136,0 2,0 703714 702106
DN100 / DN032 104 35 125,0 2,0 703715 702107
DN100 / DN040 104 41 114,0 2,0 703716 702108
DN100 / DN050 104 53 93,0 2,0 703719 702109
DN100 / DN065 104 70 61,0 2,0 703720 702110
DN100 / DN080 104 85 34,0 2,0 703721 702111
3.3
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11852
Reduzierstück (konzentrisch) | reduction piece (concentric)
ISO A B C DArt.-Nr.1.4435
item No1.4404
DN010 / DN008 17,2 13,5 6,9 1,6 703722 701962
DN015 / DN008 21,3 13,5 14,6 1,6 703724 701963
DN015 / DN010 21,3 17,2 7,7 1,6 703723 701998
DN020 / DN008 26,9 13,5 25,0 1,6 703727 701966
DN020 / DN010 26,9 17,2 18,1 1,6 703725 701964
DN020 / DN015 26,9 21,3 10,4 1,6 703726 701965
DN025 / DN010 33,7 17,2 30,8 1,6 703728 701967
DN025 / DN015 33,7 21,3 23,1 1,6 703729 701968
DN025 / DN020 33,7 26,9 12,7 1,6 703730 701969
DN032 / DN015 42,4 21,3 39,4 1,6 703733 701972
DN032 / DN020 42,4 26,9 28,9 1,6 703734 701973
DN032 / DN025 42,4 33,7 16,2 2,0 703735 701974
DN040 / DN020 48,3 26,9 39,9 2,0 703739 701978
DN040 / DN025 48,3 33,7 27,2 2,0 703740 701979
DN040 / DN032 48,3 42,4 11,0 2,0 703741 701980
DN050 / DN025 60,3 33,7 49,6 2,0 702501 701983
DN050 / DN032 60,3 42,4 33,4 2,0 703745 701984
DN050 / DN040 60,3 48,3 22,4 2,0 703746 701985
DN065 / DN032 76,1 42,4 62,9 2,0 703752 701989
DN065 / DN040 76,1 48,3 51,9 2,0 703753 701990
DN065 / DN050 76,1 60,3 29,5 2,0 703754 701991
DN080 / DN032 88,9 42,4 86,8 2,0 703756 701993
DN080 / DN040 88,9 48,3 75,8 2,0 703757 701947
DN080 / DN050 88,9 60,3 53,4 2,0 703758 701994
DN080 / DN065 88,9 76,1 23,9 2,0 703759 701995
DN100 / DN050 114,3 60,3 100,8 2,0 703763 701959
DN100 / DN065 114,3 76,1 71,3 2,0 703764 701960
DN100 / DN080 114,3 88,9 47,4 2,3 703765 701961
3.3
ASME-BPE A B C D
Art.-Nr.1.4435
item No1.4404
DN 1” / DN ¾” 25,4 19,1 12,6 1,5 705727 705738
DN 1½” / DN 1” 38,1 25,4 22,8 1,5 705728 705739
DN 2” / DN 1” 50,8 25,4 46,5 1,5 706040 706041
DN 2” / DN 1½” 50,8 38,1 23,7 1,5 705729 705740
DN 2½” / DN 1½” 63,5 38,1 47,4 1,5 705730 705741
DN 2½” / DN 2” 63,5 50,8 23,7 1,5 705731 705742
DN 3” / DN 1½” 76,2 38,1 70,9 1,5 705732 705743
DN 3” / DN 2” 76,2 50,8 47,2 1,5 705733 705744
DN 3” / DN 2½” 76,2 63,5 23,5 2,0 705734 705745
DN 4” / DN 2” 101,6 50,8 92,9 2,0 705735 705746
DN 4” / DN 2½” 101,6 63,5 69,2 2,0 705736 705747
DN 4” / DN 3” 101,6 76,2 45,7 2,0 705737 705748
weitere Abmessungen auf Anfrage | more dimensions on demand
Red-Stück E3.4
Reduzierstück -exzentrisch- DIN 11852-RE,hergestellt aus Rohren gemäß DIN 11866, bzw. DIN 17457 Tab. 6 K2G (EN 10217-7)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen (1.4435)
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
Oberfl ächen (1.4404)
innen: metallblank, gebeizt - Ra ≤ 0,8/1,6µmaußen: metallblank, gebeizt
Toleranzen
DIN EN ISO 1127
Verpackung
einzeln in Folienbeutel verpackt
Werkstoff (DIN) 1.4435/1.4404
reduction piece -eccentric- DIN 11852-RE,made of tubes according to DIN 11866, DIN 17457 tab. 6 K2G (EN 10217-7) respectively
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces (1.4435)
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
surfaces (1.4404)
inside: bright annealed, pickled - Ra ≤ 0,8/1,6µmoutside: bright annealed, pickled
tolerances
DIN EN ISO 1127
packaging
wrapped separately in plastic bag
material (AISI)
316L
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Wandstärke
key
A outer tube diameterB inner tube diameterC total lengthD wall thickness
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11852
Reduzierstück (exzentrisch) | reduction piece (eccentric)
DIN A B C DArt.-Nr.1.4435
item No1.4404
DN015 / DN010 19 13 16,5 1,5 703606 702077
DN020 / DN010 23 13 27,5 1,5 703607 702078
DN020 / DN015 23 19 11,0 1,5 703608 702079
DN025 / DN010 29 13 44,0 1,5 703609 702080
DN025 / DN015 29 19 27,5 1,5 703610 702081
DN025 / DN020 29 23 16,5 1,5 703611 702082
DN032 / DN015 35 19 44,0 1,5 703613 702084
DN032 / DN020 35 23 33,0 1,5 703614 702085
DN032 / DN025 35 29 16,5 1,5 703615 702050
DN040 / DN015 41 19 60,4 1,5 703616 702051
DN040 / DN020 41 23 49,5 1,5 703617 702086
DN040 / DN025 41 29 33,0 1,5 703618 702053
DN040 / DN032 41 35 16,5 1,5 703619 702054
DN050 / DN025 53 29 66,0 1,5 703622 702088
DN050 / DN032 53 35 49,5 1,5 703623 702089
DN050 / DN040 53 41 33,0 1,5 703624 702090
DN065 / DN040 70 41 77,0 2,0 703628 702063
DN065 / DN050 70 53 44,0 2,0 703629 702094
DN080 / DN050 85 53 85,2 2,0 703632 702067
DN080 / DN065 85 70 41,2 2,0 703633 702068
DN100 / DN050 104 53 137,4 2,0 703638 702075
DN100 / DN065 104 70 93,4 2,0 703639 702076
DN100 / DN080 104 85 52,5 2,0 703640 702040
3.4
weitere Abmessungen auf Anfrage | more dimensions on demand
ASME-BPE A B C D
Art.-Nr.1.4435
item No1.4404
DN 1” / DN ¾” 25,4 19,1 18,7 1,5 705869 706299
DN 1½” / DN 1” 38,1 25,4 33,5 1,5 705749 705762
DN 2” / DN 1” 50,8 25,4 68,4 1,5 705750 705763
DN 2” / DN 1½” 50,8 38,1 34,9 1,5 705751 705764
DN 2½” / DN 1” 63,5 25,4 102,3 1,5 705752 705765
DN 2½” / DN 1½” 63,5 38,1 69,8 1,5 705753 705766
DN 2½” / DN 2” 63,5 50,8 34,9 1,5 705754 705767
DN 3” / DN 1” 76,2 25,4 136,9 1,5 705755 705768
DN 3” / DN 1½” 76,2 38,1 104,4 1,5 705756 705769
DN 3” / DN 2” 76,2 50,8 69,5 1,5 705757 705770
DN 3” / DN 2½” 76,2 63,5 34,6 2,0 705758 705771
DN 4” / DN 2” 101,6 50,8 136,8 2,0 705759 705772
DN 4” / DN 2½” 101,6 63,5 101,9 2,0 705760 705773
DN 4” / DN 3” 101,6 76,2 67,3 2,0 705761 705774
DIN 118523.4
Reduzierstück (exzentrisch) | reduction piece (eccentric)
ISO A B C DArt.-Nr.1.4435
item No1.4404
DN010 / DN008 17,2 13,5 10,2 1,6 703641 701914
DN015 / DN008 21,3 13,5 21,4 1,6 703643 701916
DN015 / DN010 21,3 17,2 11,3 1,6 703642 701996
DN020 / DN008 26,9 13,5 36,8 1,6 703646 701919
DN020 / DN010 26,9 17,2 26,7 1,6 703644 701917
DN020 / DN015 26,9 21,3 15,4 1,6 703645 701918
DN025 / DN010 33,7 17,2 45,3 1,6 703647 701920
DN025 / DN015 33,7 21,3 34,1 1,6 703866 701921
DN025 / DN020 33,7 26,9 18,7 1,6 703648 701922
DN032 / DN015 42,4 21,3 57,4 1,6 703651 701925
DN032 / DN020 42,4 26,9 42,0 1,6 703652 701926
DN032 / DN025 42,4 33,7 23,9 2,0 703653 701927
DN040 / DN020 48,3 26,9 58,8 2,0 703657 701931
DN040 / DN025 48,3 33,7 40,1 2,0 703658 701932
DN040 / DN032 48,3 42,4 16,2 2,0 703659 701933
DN050 / DN032 60,3 42,4 49,2 2,0 703663 701937
DN050 / DN040 60,3 48,3 33,0 2,0 703664 701938
DN065 / DN040 76,1 48,3 76,4 2,0 703670 701943
DN065 / DN050 76,1 60,3 43,4 2,0 703672 701944
DN080 / DN040 88,9 48,3 111,5 2,0 703675 701948
DN080 / DN050 88,9 60,3 78,6 2,0 703676 701997
DN080 / DN065 88,9 76,1 35,2 2,0 703677 701949
DN100 / DN065 114,3 76,1 105,0 2,0 703683 701912
DN100 / DN080 114,3 88,9 69,5 2,3 703684 701913
weitere Abmessungen auf Anfrage | more dimensions on demand
Sterile Bogen 4.
4. Bogen | bends
4.1 STERI-Bo© 90° - DIN 11865-BL-90°
4.2 STERI-Bo© 45° - DIN 11865-BL-45°
4.3 MEDI-Bo© 90°/45° - DIN 11852 BL - 90°/45°, IIa
STERI-Bo© 90°4.1
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeC1 zylindrische LängeR Radius
key
A outer tube diameterB inner tube diameterC total lengthC1 cylindrical lengthR radius
sterile Bogen 90° - DIN 11865-BL-90° ,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic bends 90° - DIN 11865-BL-90°,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
DIN 11865
sterile Bogen 90° | aseptic bends 90°
DINRohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN006 8 x 1,0 8 6 45 25 20 0,015 700499 702156 701197
DN008 10 x 1,0 10 8 50 25 25 0,020 702154 701196 702155
DN010 12 x 1,0 12 10 51 25 26 0,025 700483 701164 701165
DN010 13 x 1,5 13 10 51 25 26 0,040 703823 704366 704367
DN015 19 x 1,5 19 16 60 25 35 0,070 700487 701172 701173
DN020 23 x 1,5 23 20 65 25 40 0,090 700489 701176 701177
DN025 29 x 1,5 29 26 90 40 50 0,160 700491 701180 701181
DN032 35 x 1,5 35 32 95 40 55 0,210 700493 701184 701185
DN040 41 x 1,5 41 38 100 40 60 0,255 700495 701188 701189
DN050 53 x 1,5 53 50 110 40 70 0,365 700497 701192 701193
DN065 70 x 2,0 70 66 120 40 80 0,700 700500 701198 701199
DN080 85 x 2,0 85 81 145 55 90 1,045 700503 701204 701205
DN100 104 x 2,0 104 100 155 55 100 1,365 700485 701168 702170
ISORohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN008 13,5 x 1,6 13,5 10,3 45,0 25 20,0 0,040 700502 701202 701203
DN010 17,2 x 1,6 17,2 14,0 53,0 25 28,0 0,060 700484 701166 701167
DN015 21,3 x 1,6 21,3 18,1 55,0 25 30,0 0,075 701174 700488 701175
DN020 26,9 x 1,6 26,9 23,7 68,5 40 28,5 0,125 700490 701178 701179
DN025 33,7 x 2,0 33,7 29,7 78,0 40 38,0 0,220 700492 701182 701183
DN032 42,4 x 2,0 42,4 38,4 87,5 40 47,5 0,315 700494 701186 701187
DN040 48,3 x 2,0 48,3 44,3 97,0 40 57,0 0,395 700496 701190 701191
DN050 60,3 x 2,0 60,3 56,3 116,0 40 76,0 0,585 700498 701194 701195
DN065 76,1 x 2,0 76,1 72,1 150,0 55 95,0 0,965 700501 701200 701201
DN080 88,9 x 2,3 88,9 84,3 169,5 55 114,5 1,445 700504 701206 701207
DN100 114,3 x 2,3 114,3 109,7 207,5 55 152,5 2,250 702146 701170 701171
ASME-BPE
Rohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN ½” 12,7 x 1,65 12,7 9,4 76,2 50,8 25,4 0,065 702584 703103 703104
DN ¾” 19,05 x 1,65 19,05 15,75 76,2 50,8 25,4 0,100 702585 703111 703112
DN 1” 25,4 x 1,65 25,4 22,1 76,2 38,1 38,1 0,135 702586 703099 703100
DN 1½” 38,1 x 1,65 38,1 34,8 95,3 38,1 57,2 0,245 702587 703101 703102
DN 2” 50,8 x 1,65 50,8 47,5 120,7 44,5 76,2 0,460 702588 703105 703106
DN 2½” 63,5 x 1,65 63,5 60,2 139,7 44,4 95,3 0,600 702589 703107 703108
DN 3” 76,2 x 1,65 76,2 72,9 158,8 44,5 114,3 0,815 702590 703109 703110
DN 4” 101,6 x 2,11 101,6 97,38 203,2 50,8 152,4 1,790 705012 705013 705015
4.1
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
STERI-Bo© 45°
sterile Bogen 45° - DIN 11865-BL-45°,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic bends 45° - DIN 11865-BL-45°,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
4.2
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeC1 zylindrische LängeR Radius
key
A outer tube diameterB inner tube diameterC total lengthC1 cylindrical lengthR radius
DIN 11865
sterile Bogen 45° | aseptic bends 45°
DINRohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN006 8 x 1,0 8 6 33,3 25 20 0,010 700477 701152 702152
DN008 10 x 1,0 10 8 35,4 25 25 0,015 702143 702153 701153
DN010 12 x 1,0 12 10 35,8 25 26 0,020 700461 701120 701121
DN010 13 x 1,5 13 10 35,8 25 26 0,030 704368 704369 704370
DN015 19 x 1,5 19 16 39,5 25 35 0,045 700465 701128 701129
DN020 23 x 1,5 23 20 41,6 25 40 0,060 700467 701132 701133
DN025 29 x 1,5 29 26 60,7 40 50 0,120 700469 701136 701137
DN032 35 x 1,5 35 32 62,8 40 55 0,145 700471 701140 701141
DN040 41 x 1,5 41 38 64,9 40 60 0,185 700473 701144 701145
DN050 53 x 1,5 53 50 69,0 40 70 0,265 700475 701148 701149
DN065 70 x 2,0 70 66 73,1 40 80 0,485 700478 701154 701155
DN080 85 x 2,0 85 81 92,3 55 90 0,750 700481 701160 701161
DN100 104 x 2,0 104 100 96,4 55 100 0,965 700463 701124 701125
ISORohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN008 13,5 x 1,6 13,5 10,3 33,3 25 20,0 0,030 700480 701158 701159
DN010 17,2 x 1,6 17,2 14,0 36,6 25 28,0 0,045 700462 701122 701123
DN015 21,3 x 1,6 21,3 18,1 37,4 25 30,0 0,060 700466 701130 701131
DN020 26,9 x 1,6 26,9 23,7 51,8 40 28,5 0,105 700468 701134 701135
DN025 33,7 x 2,0 33,7 29,7 55,7 40 38,0 0,175 700470 701138 701139
DN032 42,4 x 2,0 42,4 38,4 59,7 40 47,5 0,235 700472 701142 701143
DN040 48,3 x 2,0 48,3 44,3 63,6 40 57,0 0,290 700474 701146 701147
DN050 60,3 x 2,0 60,3 56,3 71,5 40 76,0 0,410 700476 701150 701151
DN065 76,1 x 2,0 76,1 72,1 94,4 55 95,0 0,685 700479 701156 701157
DN080 88,9 x 2,3 88,9 84,3 102,4 55 114,5 0,995 700482 701162 701163
DN100 114,3 x 2,3 114,3 109,7 118,2 55 152,5 1,485 702161 701126 701127
ASME-BPE
Rohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN ½” 12,7 x 1,65 12,7 9,4 57,2 46,7 25,4 0,055 703221 703222 703223
DN ¾” 19,05 x 1,65 19,05 15,75 57,2 46,7 25,4 0,085 703233 703234 703235
DN 1” 25,4 x 1,65 25,4 22,1 57,2 41,4 38,1 0,105 703215 703216 703217
DN 1½” 38,1 x 1,65 38,1 34,8 63,5 39,8 57,2 0,220 703218 703220 703219
DN 2” 50,8 x 1,65 50,8 47,5 76,2 44,6 76,2 0,300 703224 703226 703225
DN 2½” 63,5 x 1,65 63,5 60,2 85,7 47,0 95,3 0,420 703227 703229 703228
DN 3” 76,2 x 1,65 76,2 72,9 92,1 44,8 114,3 0,550 703230 703232 703231
DN 4” 101,6 x 2,11 101,6 97,38 114,3 51,2 152,4 1,165 705011 705014 705016
4.2
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
Bogen 90°/45° - DIN 11852 BL - 90°/45°, IIa,hergestellt aus geschweißten Rohren nach DIN 17457 Tab. 6 K2G (EN 10217-7)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/1,6µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN EN ISO 1127
Verpackung
in Folienbeutel verpackt
auf Wunsch:
Schweißenden mit Kunststoffkappen verschlossen
Werkstoff (DIN) 1.4404
bends 90°/45° - DIN 11852 BL - 90°/45°, IIa,made of welded tubes according to DIN 17457 tab. 6 K2G (EN 10217-7)
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/1,6µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN EN ISO 1127
packaging
wrapped in plastic bag
on demand: welding ends covered with plastic caps
material (AISI)
316L
MEDI-Bo© 90°/45°4.3
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeC1 zylindrische LängeR Radius
key
A outer tube diameterB inner tube diameterC total lengthC1 cylindrical lengthR radius
Bogen 90° | bends 90°
DINRohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN010 13 x 1,5 13 10 51 25 26 0,040 704122 705346 705350
DN015 19 x 1,5 19 16 60 25 35 0,070 704424 702978 705352
DN020 23 x 1,5 23 20 65 25 40 0,090 702900 705347 705354
DN025 29 x 1,5 29 26 90 40 50 0,160 702894 702864 705356
DN032 35 x 1,5 35 32 95 40 55 0,210 702901 705348 705358
DN040 41 x 1,5 41 38 100 40 60 0,255 703013 704502 705360
DN050 53 x 1,5 53 50 110 40 70 0,365 702895 703490 705362
DN065 70 x 2,0 70 66 120 40 80 0,700 702897 704431 705364
DN080 85 x 2,0 85 81 145 55 90 1,045 702896 704201 705366
DN100 104 x 2,0 104 100 155 55 100 1,365 703034 705349 705368
DIN 11852 4.3
Bogen 45° | bends 45°
DINRohr-Øtube-Ø A B C C1 R kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN010 13 x 1,5 13 10 35,8 25 26 0,030 705336 705337 705351
DN015 19 x 1,5 19 16 39,5 25 35 0,045 702893 705338 705353
DN020 23 x 1,5 23 20 41,6 25 40 0,060 702891 705339 705355
DN025 29 x 1,5 29 26 60,7 40 50 0,120 702887 705340 705357
DN032 35 x 1,5 35 32 62,8 40 55 0,145 702888 705341 705359
DN040 41 x 1,5 41 38 64,9 40 60 0,185 702583 704554 705361
DN050 53 x 1,5 53 50 69,0 40 70 0,265 702889 705342 705363
DN065 70 x 2,0 70 66 73,1 40 80 0,485 703060 705343 705365
DN080 85 x 2,0 85 81 92,3 55 90 0,750 702892 705344 705367
DN100 104 x 2,0 104 100 96,4 55 100 0,965 702591 705345 705369
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
Sterile T-Stücke 5.
5. T-Stücke und Kreuzstücke | tees and cross pieces
5.1 STERI-T© egal | equal - DIN 11865-T
5.2 STERI-T© kurz | short - DIN 11865-TK
5.3 STERI-T© reduziert | reduced - DIN 11865-T
5.4 STERI-T© reduziert und kurz | reduced and short - DIN 11865-TK
5.5 MEDI-T© egal/kurz | equal/short - DIN 11852-T/TK
5.6 STERI-Cross© egal | equal
5.7 STERI-Cross© kurz | short
STERI-T© egal | equal
Legende
A Rohr-AußendurchmesserB Rohr-Innendurchmesser C Gesamtlänge C/2 Länge Abgang
key
A outer tube diameterB inner tube diameterC total length C/2 branch length
steriles T-Stück -egal-, DIN 11865-T,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic tee -equal-, DIN 11865-T,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
5.1
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11865
sterile T-Stücke (egal) | aseptic tees (equal)
DINRohr-Øtube-Ø A B C C/2 kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN010 12 x 1,0 12 10 70 35 0,030 700505 701208 701209
DN010 13 x 1,5 13 10 70 35 0,045 705380 705383 705384
DN015 19 x 1,5 19 16 70 35 0,065 700509 701216 701217
DN020 23 x 1,5 23 20 80 40 0,090 700511 701220 701221
DN025 29 x 1,5 29 26 100 50 0,135 700513 701224 701225
DN032 35 x 1,5 35 32 110 55 0,180 700515 701228 701229
DN040 41 x 1,5 41 38 120 60 0,225 700517 701232 701233
DN050 53 x 1,5 53 50 160 80 0,450 700519 701236 701237
DN065 70 x 2,0 70 66 210 105 0,905 700522 701242 701243
DN080 85 x 2,0 85 81 260 130 1,470 700525 701248 701249
DN100 104 x 2,0 104 100 310 155 1,730 700507 701212 701213
ISORohr-Øtube-Ø A B C C/2 kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN008 13,5 x 1,6 13,5 10,3 64 32 0,045 700524 701246 701247
DN010 17,2 x 1,6 17,2 14,0 68 34 0,060 700506 701210 701211
DN015 21,3 x 1,6 21,3 18,1 72 36 0,085 700510 701218 701219
DN020 26,9 x 1,6 26,9 23,7 110 55 0,165 700512 701222 701223
DN025 33,7 x 2,0 33,7 29,7 120 60 0,260 700514 701226 701227
DN032 42,4 x 2,0 42,4 38,4 130 65 0,355 700516 701230 701231
DN040 48,3 x 2,0 48,3 44,3 130 65 0,430 700518 701234 701235
DN050 60,3 x 2,0 60,3 56,3 180 90 0,745 700520 701238 701239
DN065 76,1 x 2,0 76,1 72,1 220 110 1,160 700523 701244 701245
DN080 88,9 x 2,3 88,9 84,3 260 130 1,750 700526 701250 701251
DN100 114,3 x 2,3 114,3 109,7 320 160 2,700 702184 702199 701215
ASME-BPE
Rohr-Øtube-Ø A B C C/2 kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN ½” 12,7 x 1,65 12,7 9,4 95,2 47,6 0,060 702592 704995 705003
DN ¾” 19,05 x 1,65 19,05 15,75 101,6 50,8 0,105 702593 704996 705004
DN 1” 25,4 x 1,65 25,4 22,1 108,0 54,0 0,150 702594 704997 705005
DN 1½” 38,1 x 1,65 38,1 34,8 120,6 60,3 0,260 702595 704998 705006
DN 2” 50,8 x 1,65 50,8 47,5 146,0 73,0 0,440 702596 704999 705007
DN 2½” 63,5 x 1,65 63,5 60,2 159,8 79,4 0,590 702597 705000 705008
DN 3” 76,2 x 1,65 76,2 72,9 171,4 85,7 0,755 702598 705001 705009
DN 4” 101,6 x 2,11 101,6 97,38 209,6 104,8 1,590 704994 705002 705010
5.1
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
STERI-T© kurz | short5.2
steriles T-Stück -kurz-, DIN 11865-TK,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic tee -short-, DIN 11865-TK,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Länge Abgang
key
A outer tube diameterB inner tube diameterC total lengthD branch length
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11865
sterile T-Stücke (kurz) | aseptic tees (short)
DINRohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN010 12 x 1,0 12 10 70 0,020 702701
DN010 13 x 1,5 13 10 70 0,030 705382
DN015 19 x 1,5 19 16 70 11,0 0,040 702703
DN020 23 x 1,5 23 20 80 13,0 0,060 702705
DN025 29 x 1,5 29 26 100 16,0 0,100 702707
DN032 35 x 1,5 35 32 110 19,5 0,135 702709
DN040 41 x 1,5 41 38 120 23,0 0,175 702711
DN050 53 x 1,5 53 50 160 30,0 0,310 702713
DN065 70 x 2,0 70 66 210 40,0 0,710 702715
DN080 85 x 2,0 85 81 260 47,5 1,080 702717
DN100 104 x 2,0 104 100 310 58,0 1,580 702719
ISORohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 64 0,030 702700
DN010 17,2 x 1,6 17,2 14,0 68 10,1 0,040 702702
DN015 21,3 x 1,6 21,3 18,1 72 12,2 0,060 702704
DN020 26,9 x 1,6 26,9 23,7 110 15,0 0,115 702706
DN025 33,7 x 2,0 33,7 29,7 120 18,4 0,180 702708
DN032 42,4 x 2,0 42,4 38,4 130 23,2 0,260 702710
DN040 48,3 x 2,0 48,3 44,3 130 26,7 0,300 702712
DN050 60,3 x 2,0 60,3 56,3 180 33,7 0,520 702714
DN065 76,1 x 2,0 76,1 72,1 220 43,1 0,815 702716
DN080 88,9 x 2,3 88,9 84,3 260 49,5 1,295 702718
DN100 114,3 x 2,3 114,3 109,7 320 63,2 2,100 702720
ASME-BPE
Rohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 95,2 0,040 702727
DN ¾” 19,05 x 1,65 19,05 15,75 101,6 11,0 0,075 702731
DN 1” 25,4 x 1,65 25,4 22,1 108,0 14,2 0,105 702725
DN 1½” 38,1 x 1,65 38,1 34,8 120,6 21,1 0,180 702726
DN 2” 50,8 x 1,65 50,8 47,5 146,0 28,9 0,295 702728
DN 2½” 63,5 x 1,65 63,5 60,2 159,8 35,3 0,405 702729
DN 3” 76,2 x 1,65 76,2 72,9 171,4 43,1 0,525 702730
DN 4” 101,6 x 2,11 101,6 97,38 209,6 56,8 1,100 704993
5.2
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-T© reduziert | reduced5.3
steries T-Stück -reduziert-, DIN 11865-T,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic tee -reduced-, DIN 11865-T,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
Legende
A Rohr-Außendurchmesser (Durchgang)A1 Rohr-Außendurchmesser (Abzweig)B Rohr-Innendurchmesser (Durchgang)B1 Rohr-Innendurchmesser (Abzweig)C GesamtlängeD Länge Abgang
key
A outer tube diameter (throughput)A1 outer tube diameter (branch)B inner tube diameter (throughput)B1 inner tube diameter (branch)C total lengthD branch length
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11865 5.3
sterile T-Stücke (reduziert) | aseptic tees (reduced)
DIN A B A1 B1 C D kgMB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN015 / DN010 19 16 12 10 70 35 0,060 705775 705776 705777
DN015 / DN010 19 16 13 10 70 35 0,060 700527 701252 701253
DN020 / DN010 23 20 12 10 80 40 0,075 700531 701260 701261
DN020 / DN010 23 20 13 10 80 40 0,075 706355 706356 706357
DN020 / DN015 23 20 19 16 80 40 0,085 700533 701264 701265
DN025 / DN010 29 26 12 10 100 50 0,115 700535 702196 701269
DN025 / DN010 29 26 13 10 100 50 0,115 706359 706361 706360
DN025 / DN015 29 26 19 16 100 50 0,125 702194 701268 702204
DN025 / DN020 29 26 23 20 100 50 0,130 702245 702244 702246
DN032 / DN010 35 32 12 10 110 55 0,160 700537 701272 701273
DN032 / DN010 35 32 13 10 110 55 0,160 706363 706364 706365
DN032 / DN015 35 32 19 16 110 55 0,160 702247 702254 702255
DN032 / DN020 35 32 23 20 110 55 0,165 702250 702249 702248
DN032 / DN025 35 32 29 26 110 55 0,175 702253 702251 702252
DN040 / DN010 41 38 12 10 120 60 0,205 702600 702601 702602
DN040 / DN010 41 38 13 10 120 60 0,205 706367 706368 706369
DN040 / DN015 41 38 19 16 120 60 0,205 700539 701276 701277
DN040 / DN020 41 38 23 20 120 60 0,210 702280 702282 702281
DN040 / DN025 41 38 29 26 120 60 0,215 702285 702283 702284
DN040 / DN032 41 38 35 32 120 60 0,220 702286 702288 702287
DN050 / DN015 53 50 19 16 160 80 0,350 700541 701280 701281
DN050 / DN020 53 50 23 20 160 80 0,360 702289 702290 702291
DN050 / DN025 53 50 29 26 160 80 0,370 702294 702293 702292
DN050 / DN032 53 50 35 32 160 80 0,395 702296 702297 702298
DN050 / DN040 53 50 41 38 160 80 0,425 702301 702300 702299
DN065 / DN020 70 66 23 20 210 80 0,735 700543 701284 701285
DN065 / DN025 70 66 29 26 210 80 0,750 702330 702332 702331
DN065 / DN032 70 66 35 32 210 80 0,765 702334 702333 702335
DN065 / DN040 70 66 41 38 210 80 0,780 702336 702338 702337
DN065 / DN050 70 66 53 50 210 80 0,840 702341 702339 702340
DN080 / DN032 85 81 35 32 260 105 1,135 700545 701288 701289
DN080 / DN040 85 81 41 38 260 105 1,180 702342 702343 702344
DN080 / DN050 85 81 53 50 260 105 1,280 702347 702346 702345
DN080 / DN065 85 81 70 66 260 105 1,375 702348 702349 702350
DN100 / DN025 104 100 29 26 310 130 1,395 702216 701256 702215
DN100 / DN032 104 100 35 32 310 130 1,425 702201 702203 702202
DN100 / DN040 104 100 41 38 310 130 1,460 702205 702206 702207
DN100 / DN050 104 100 53 50 310 130 1,525 702182 702208 702209
DN100 / DN065 104 100 70 66 310 130 1,590 702210 702211 702186
DN100 / DN080 104 100 85 81 310 130 1,660 702212 702213 701257
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
DIN 11865
sterile T-Stücke (reduziert) | aseptic tees (reduced)
ISO A B A1 B1 C D kgMB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN010 / DN008 17,2 14,0 13,5 10,3 68 34 0,055 700530 702198 702197
DN015 / DN008 21,3 18,1 13,5 10,3 72 36 0,075 700532 701262 701263
DN015 / DN010 21,3 18,1 17,2 14,0 72 36 0,080 700528 701254 701255
DN020 / DN008 26,9 23,7 13,5 10,3 110 55 0,115 700534 701266 701267
DN020 / DN010 26,9 23,7 17,2 14,0 110 55 0,135 702229 702230 702231
DN020 / DN015 26,9 23,7 21,3 18,1 110 55 0,145 702234 702233 702232
DN025 / DN008 33,7 29,7 13,5 10,3 120 60 0,195 700536 701270 701271
DN025 / DN010 33,7 29,7 17,2 14,0 120 60 0,210 702235 702236 702237
DN025 / DN015 33,7 29,7 21,3 18,1 120 60 0,220 702240 702239 702238
DN025 / DN020 33,7 29,7 26,9 23,7 120 60 0,235 702241 702242 702243
DN032 / DN008 42,4 38,4 13,5 10,3 130 65 0,265 700538 701274 701275
DN032 / DN010 42,4 38,4 17,2 14,0 130 65 0,275 702256 702258 702257
DN032 / DN015 42,4 38,4 21,3 18,1 130 65 0,295 702261 702259 702260
DN032 / DN020 42,4 38,4 26,9 23,7 130 65 0,300 702262 702263 702264
DN032 / DN025 42,4 38,4 33,7 29,7 130 65 0,330 702265 702267 702266
DN040 / DN010 48,3 44,3 17,2 14,0 130 65 0,305 702279 701278 701279
DN040 / DN015 48,3 44,3 21,3 18,1 130 65 0,320 702268 702270 702269
DN040 / DN020 48,3 44,3 26,9 23,7 130 65 0,335 702273 702271 702272
DN040 / DN025 48,3 44,3 33,7 29,7 130 65 0,365 702274 702276 702275
DN040 / DN032 48,3 44,3 42,4 38,4 130 65 0,400 700540 702277 702278
DN050 / DN015 60,3 56,3 21,3 18,1 180 90 0,515 700542 701282 701283
DN050 / DN020 60,3 56,3 26,9 23,7 180 90 0,550 702303 702304 702305
DN050 / DN025 60,3 56,3 33,7 29,7 180 90 0,590 702308 702307 702306
DN050 / DN032 60,3 56,3 42,4 38,4 180 90 0,645 702309 702310 702311
DN050 / DN040 60,3 56,3 48,3 44,3 180 90 0,680 702314 702313 702312
DN065 / DN015 76,1 72,1 21,3 18,1 220 90 0,800 700544 701286 701287
DN065 / DN020 76,1 72,1 26,9 23,7 220 90 0,835 702315 702317 702316
DN065 / DN025 76,1 72,1 33,7 29,7 220 90 0,880 702320 702318 702319
DN065 / DN032 76,1 72,1 42,4 38,4 220 90 0,940 702321 702323 702322
DN065 / DN040 76,1 72,1 48,3 44,3 220 90 0,985 702324 702328 702326
DN065 / DN050 76,1 72,1 60,3 56,3 220 90 1,080 702325 702329 702327
DN080 / DN025 88,9 84,3 33,7 29,7 260 110 1,300 700546 701290 701291
DN080 / DN032 88,9 84,3 42,4 38,4 260 110 1,365 702351 702353 702352
DN080 / DN040 88,9 84,3 48,3 44,3 260 110 1,410 702362 702354 702355
DN080 / DN050 88,9 84,3 60,3 56,3 260 110 1,505 702358 702357 702356
DN080 / DN065 88,9 84,3 76,1 72,1 260 110 1,595 702359 702361 702360
DN100 / DN025 114,3 109,7 33,7 29,7 320 130 2,150 702200 702187 702227
DN100 / DN032 114,3 109,7 42,4 38,4 320 130 2,245 702222 701258 702228
DN100 / DN040 114,3 109,7 48,3 44,3 320 130 2,300 702219 702217 702218
DN100 / DN050 114,3 109,7 60,3 56,3 320 130 2,380 702183 702220 702221
DN100 / DN065 114,3 109,7 76,1 72,1 320 130 2,465 702224 702223 702188
DN100 / DN080 114,3 109,7 88,9 84,3 320 130 2,580 702226 702225 701259
5.3
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
DIN 11865
sterile T-Stücke (reduziert) | aseptic tees (reduced)
ASME-BPE A B A1 B1 C D kg
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN ¾” / DN ½” 19,05 15,75 12,7 9,4 101,6 50,8 0,085 703475 705789 705790
DN 1” / DN ½” 25,4 22,1 12,7 9,4 108,0 54,0 0,115 705791 704422 705674
DN 1” / DN ¾” 25,4 22,1 19,05 15,75 108,0 54,0 0,130 705792 705707 705678
DN 1½” / DN ½” 38,1 34,8 12,7 9,4 120,6 60,3 0,190 702811 704419 705793
DN 1½” / DN ¾” 38,1 34,8 19,05 15,75 120,6 60,3 0,205 704437 705794 705679
DN 1½” / DN 1” 38,1 34,8 25,4 22,1 120,6 60,3 0,225 702815 705795 705680
DN 2” / DN ¾” 50,8 47,5 19,05 15,75 146,0 66,7 0,315 704485 705796 705706
DN 2” / DN 1” 50,8 47,5 25,4 22,1 146,0 66,7 0,340 702817 705797 705681
DN 2” / DN 1½” 50,8 47,5 38,1 34,8 146,0 66,7 0,385 702813 705798 705705
DN 2½” / DN ½” 63,5 60,2 12,7 9,4 159,8 73,0 0,430 705644 705799 705800
DN 2½” / DN ¾” 63,5 60,2 19,05 15,75 159,8 73,0 0,450 705645 705801 705802
DN 2½” / DN 1” 63,5 60,2 25,4 22,1 159,8 73,0 0,475 705803 705804 705682
DN 2½” / DN 1½” 63,5 60,2 38,1 34,8 159,8 73,0 0,510 705805 705806 705683
DN 2½” / DN 2” 63,5 60,2 50,8 47,5 159,8 73,0 0,550 705807 705808 705684
DN 3” / DN 1½” 76,2 72,9 38,1 34,8 171,4 79,4 0,610 705809 705810 705811
DN 3” / DN 2” 76,2 72,9 50,8 47,5 171,4 79,4 0,665 705812 705813 705814
DN 3” / DN 2½” 76,2 72,9 63,5 60,2 171,4 79,4 0,710 705815 705816 705817
DN 4” / DN 2” 101,6 97,38 50,8 47,5 209,6 98,4 1,185 705818 705819 705820
DN 4” / DN 2½” 101,6 97,38 63,5 60,2 209,6 98,4 1,270 705821 705822 705823
DN 4” / DN 3” 101,6 97,38 76,2 72,90 209,6 98,4 1,385 705824 705825 705826
5.3
weitere Abmessungen auf Anfrage | more dimensions on demandMB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
STERI-T© reduziert und kurz | reduced and short5.4
steriles T-Stück -reduziert und kurz-, DIN 11865-TK,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN 11865 / DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic tee -reduced-, DIN 11865-TK,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN 11865 / DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
Legende
A Rohr-Außendurchmesser (Durchgang)A1 Rohr-Außendurchmesser (Abzweig)B Rohr-Innendurchmesser (Durchgang)B1 Rohr-Innendurchmesser (Abzweig)C GesamtlängeD Länge Abgang
key
A outer tube diameter (throughput)A1 outer tube diameter (branch)B inner tube diameter (throughput)B1 inner tube diameter (branch)C total lengthD branch length
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
sterile T-Stücke (reduziert und kurz) | aseptic tees (reduced and short)
DIN A B A1 B1 C D kgArt.-Nr.item No.
DN015 / DN010 19 16 12 10 70 11,0 0,040 702734
DN015 / DN010 19 16 13 10 70 11,0 0,040 706354
DN020 / DN010 23 20 12 10 80 13,0 0,060 702737
DN020 / DN010 23 20 13 10 80 13,0 0,060 706358
DN020 / DN015 23 20 19 16 80 13,0 0,060 702739
DN025 / DN010 29 26 12 10 100 16,0 0,100 702742
DN025 / DN010 29 26 13 10 100 16,0 0,100 706362
DN025 / DN015 29 26 19 16 100 16,0 0,100 702744
DN025 / DN020 29 26 23 20 100 16,0 0,100 702746
DN032 / DN010 35 32 12 10 110 19,0 0,135 702749
DN032 / DN010 35 32 13 10 110 19,0 0,135 706366
DN032 / DN015 35 32 19 16 110 19,0 0,135 702751
DN032 / DN020 35 32 23 20 110 19,0 0,135 702753
DN032 / DN025 35 32 29 26 110 19,0 0,135 702755
DN040 / DN010 41 38 12 10 120 22,0 0,175 702757
DN040 / DN010 41 38 13 10 120 22,0 0,175 706370
DN040 / DN015 41 38 19 16 120 22,0 0,175 702759
DN040 / DN020 41 38 23 20 120 22,0 0,175 702761
DN040 / DN025 41 38 29 26 120 22,0 0,175 702763
DN040 / DN032 41 38 35 32 120 22,5 0,175 702765
DN050 / DN020 53 50 23 20 160 28,0 0,310 702769
DN050 / DN025 53 50 29 26 160 28,0 0,310 702771
DN050 / DN032 53 50 35 32 160 28,5 0,310 702773
DN050 / DN040 53 50 41 38 160 29,0 0,310 702776
DN065 / DN025 70 66 29 26 210 37,0 0,710 702781
DN065 / DN032 70 66 35 32 210 37,0 0,710 702783
DN065 / DN040 70 66 41 38 210 37,5 0,710 702785
DN065 / DN050 70 66 53 50 210 38,5 0,710 702787
DN080 / DN032 85 81 35 32 260 45,0 1,080 702790
DN080 / DN040 85 81 41 38 260 45,0 1,080 702792
DN080 / DN050 85 81 53 50 260 46,0 1080 702794
DN080 / DN065 85 81 70 66 260 47,5 1,080 702796
DN100 / DN025 104 100 29 26 310 55,5 1,580 702799
DN100 / DN032 104 100 35 32 310 55,5 1,580 702801
DN100 / DN040 104 100 41 38 310 55,5 1,580 702803
DN100 / DN050 104 100 53 50 310 55,5 1,580 702805
DN100 / DN065 104 100 70 66 310 57,0 1,580 702807
DN100 / DN080 104 100 85 81 310 57,0 1,580 702809
DIN 11865 5.4
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11865
sterile T-Stücke (reduziert und kurz) | aseptic tees (reduced and short)
ISO A B A1 B1 C D kgArt.-Nr.item No
DN010 / DN008 17,2 14,0 13,5 10,3 68 10,1 0,040 702732
DN015 / DN008 21,3 18,1 13,5 10,3 72 12,2 0,060 702733
DN015 / DN010 21,3 18,1 17,2 14,0 72 12,2 0,060 702735
DN020 / DN008 26,9 23,7 13,5 10,3 110 15,0 0,115 702736
DN020 / DN010 26,9 23,7 17,2 14,0 110 15,0 0,115 702738
DN020 / DN015 26,9 23,7 21,3 18,1 110 15,0 0,115 702740
DN025 / DN008 33,7 29,7 13,5 10,3 120 18,4 0,190 702741
DN025 / DN010 33,7 29,7 17,2 14,0 120 18,4 0,190 702743
DN025 / DN015 33,7 29,7 21,3 18,1 120 18,4 0,190 702745
DN025 / DN020 33,7 29,7 26,9 23,7 120 18,4 0,190 702747
DN032 / DN008 42,4 38,4 13,5 10,3 130 22,7 0,260 702748
DN032 / DN010 42,4 38,4 17,2 14,0 130 22,7 0,260 702750
DN032 / DN015 42,4 38,4 21,3 18,1 130 22,7 0,260 702752
DN032 / DN020 42,4 38,4 26,9 23,7 130 22,7 0,260 702754
DN032 / DN025 42,4 38,4 33,7 29,7 130 22,7 0,260 702756
DN040 / DN010 48,3 44,3 17,2 14,0 130 25,7 0,300 702758
DN040 / DN015 48,3 44,3 21,3 18,1 130 25,7 0,300 702760
DN040 / DN020 48,3 44,3 26,9 23,7 130 25,7 0,300 702762
DN040 / DN025 48,3 44,3 33,7 29,7 130 25,7 0,300 702764
DN040 / DN032 48,3 44,3 42,4 38,4 130 26,2 0,300 702766
DN050 / DN015 60,3 56,3 21,3 18,1 180 31,7 0,520 702768
DN050 / DN020 60,3 56,3 26,9 23,7 180 31,7 0,520 702770
DN050 / DN025 60,3 56,3 33,7 29,7 180 31,7 0,520 702772
DN050 / DN032 60,3 56,3 42,4 38,4 180 32,2 0,520 702775
DN050 / DN040 60,3 56,3 48,3 44,3 180 32,7 0,520 702777
DN065 / DN015 76,1 72,1 21,3 18,1 220 40,1 0,815 702778
DN065 / DN020 76,1 72,1 26,9 23,7 220 40,1 0,815 702780
DN065 / DN025 76,1 72,1 33,7 29,7 220 40,1 0,815 702782
DN065 / DN032 76,1 72,1 42,4 38,4 220 40,1 0,815 702784
DN065 / DN040 76,1 72,1 48,3 44,3 220 40,6 0,815 702786
DN065 / DN050 76,1 72,1 60,3 56,3 220 41,6 0,815 702788
DN080 / DN025 88,9 84,3 33,7 29,7 260 47,0 1,295 702789
DN080 / DN032 88,9 84,3 42,4 38,4 260 47,0 1,295 702791
DN080 / DN040 88,9 84,3 48,3 44,3 260 47,0 1,295 702793
DN080 / DN050 88,9 84,3 60,3 56,3 260 48,0 1,295 702795
DN080 / DN065 88,9 84,3 76,1 72,1 260 49,5 1,295 702797
DN100 / DN025 114,3 109,7 33,7 29,7 320 60,7 2,110 702800
DN100 / DN032 114,3 109,7 42,4 38,4 320 60,7 2,110 702802
DN100 / DN040 114,3 109,7 48,3 44,3 320 60,7 2,110 702804
DN100 / DN050 114,3 109,7 60,3 56,3 320 60,7 2,110 702806
DN100 / DN065 114,3 109,7 76,1 72,1 320 62,2 2,115 702808
DN100 / DN080 114,3 109,7 88,9 84,3 320 62,2 2,115 702810
5.4
weitere Abmessungen auf Anfrage | more dimensions on demand
DIN 11865
sterile T-Stücke (reduziert und kurz) | aseptic tees (reduced and short)
ASME-BPE A B A1 B1 C D kg
Art.-Nr.item No
DN ¾” / DN ½” 19,05 15,75 12,7 9,4 101,6 11,0 0,075 703237
DN 1” / DN ½” 25,4 22,1 12,7 9,4 108,0 14,2 0,105 703435
DN 1” / DN ¾” 25,4 22,1 19,05 15,75 108,0 14,2 0,105 704571
DN 1½” / DN ½” 38,1 34,8 12,7 9,4 120,6 20,6 0,180 702812
DN 1½” / DN ¾” 38,1 34,8 19,05 15,75 120,6 20,6 0,180 703463
DN 1½” / DN 1” 38,1 34,8 25,4 22,1 120,6 20,6 0,180 702816
DN 2” / DN ½” 50,8 47,5 12,7 9,4 146,0 26,9 0,295 703434
DN 2” / DN ¾” 50,8 47,5 19,05 15,75 146,0 26,9 0,295 703433
DN 2” / DN 1” 50,8 47,5 25,4 22,1 146,0 26,9 0,295 702818
DN 2” / DN 1½” 50,8 47,5 38,1 34,8 146,0 27,4 0,295 702814
DN 2½” / DN ½” 63,5 60,2 12,7 9,4 159,8 33,8 0,405 704572
DN 2½” / DN ¾” 63,5 60,2 19,05 15,75 159,8 33,8 0,405 706448
DN 2½” / DN 1” 63,5 60,2 25,4 22,1 159,8 33,8 0,405 704573
DN 2½” / DN 1½” 63,5 60,2 38,1 34,8 159,8 33,8 0,405 704574
DN 2½” / DN 2” 63,5 60,2 50,8 47,5 159,8 35,3 0,405 704576
DN 3” / DN 1½” 76,2 72,9 38,1 34,8 171,4 40,1 0,525 705827
DN 3” / DN 2” 76,2 72,9 50,8 47,5 171,4 41,6 0,525 705828
DN 3” / DN 2½” 76,2 72,9 63,5 60,2 171,4 41,6 0,525 705829
DN 4” / DN 2” 101,6 97,38 50,8 47,5 209,6 54,3 1,100 705830
DN 4” / DN 2½” 101,6 97,38 63,5 60,2 209,6 54,3 1,100 705831
DN 4” / DN 3” 101,6 97,38 76,2 72,90 209,6 55,8 1,100 705832
5.4
weitere Abmessungen auf Anfrage | more dimensions on demand
MEDI-T© egal/kurz | equal/short5.5
T-Stück -egal/kurz-, DIN 11852-T/TK,hergestellt aus geschweißten Rohren nach DIN 17457 Tab. 6 K2G (EN 10217-7)
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/1,6µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN EN ISO 1127
Verpackung
in Folienbeutel verpackt
auf Wunsch:
Schweißenden mit Kunststoffkappen verschlossen
Werkstoff (DIN) 1.4404
tee -equal/short-, DIN 11852-T/TK,made of welded tubes according to DIN 17457 tab. 6 K2G (EN 10217-7)
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/1,6µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN EN ISO 1127
packaging
wrapped in plastic bag
on demand: welding ends covered with plastic caps
material (AISI)
316L
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC Gesamtlänge C/2 Länge AbgangD Länge Abgang
key
A outer tube diameterB inner tube diameterC total length C/2 branch lengthD branch length
nicht alle angegebenen Abmessungen sind in der DIN-Norm enthalten
several mentioned sizes are not included in the DIN-standard
DIN 11852
MEDI-T (egal | equal)
DINRohr-Øtube-Ø A B C C/2 kg
Art.-Nr.item No
DN010 12 x 1,0 12 10 60 30 0,030 705388
DN010 13 x 1,5 13 10 60 30 0,040 705387
DN015 19 x 1,5 19 16 70 35 0,060 702885
DN020 23 x 1,5 23 20 80 40 0,090 704425
DN025 29 x 1,5 29 26 100 50 0,150 703126
DN032 35 x 1,5 35 32 110 55 0,190 703771
DN040 41 x 1,5 41 38 120 60 0,260 702852
DN050 53 x 1,5 53 50 140 70 0,405 703767
DN065 70 x 2,0 70 66 160 80 0,810 703770
DN080 85 x 2,0 85 81 180 90 1,110 703768
DN100 104 x 2,0 104 100 200 100 1,530 703769
auch als reduzierte Ausführung erhältlich | reduced types are also available
MEDI-T (kurz | short)
DINRohr-Øtube-Ø A B C D kg
Art.-Nr.item No
DN015 19 x 1,5 19 16 70 11,0 0,040 702835
DN020 23 x 1,5 23 20 80 13,0 0,060 702956
DN025 29 x 1,5 29 26 100 16,0 0,100 702996
DN032 35 x 1,5 35 32 110 19,5 0,135 703022
DN040 41 x 1,5 41 38 120 23,0 0,175 703067
DN050 53 x 1,5 53 50 140 30,0 0,270 702945
DN065 70 x 2,0 70 66 160 40,0 0,540 702955
DN080 85 x 2,0 85 81 180 47,5 0,745 704249
DN100 104 x 2,0 104 100 200 58,0 1,020 705060
auch als reduzierte Ausführung erhältlich | reduced types are also available
5.5
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Cross© egal | equal5.6
steriles Kreuzstück -egal-,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic cross piece -equal-,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
Legende
A Rohr-AußendurchmesserB Rohr-Innendurchmesser C Gesamtlänge C/2 Länge Abgang
key
A outer tube diameterB inner tube diameterC total length C/2 branch length
STERI-Cross©
sterile Kreuzstücke -egal- | aseptic cross pieces -equal-
DINRohr-Øtube-Ø A B C C/2
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN010 12 x 1,0 12 10 70 35 705876 705900 705901
DN010 13 x 1,5 13 10 70 35 705877 705902 705903
DN015 19 x 1,5 19 16 70 35 704968 705904 705905
DN020 23 x 1,5 23 20 80 40 703460 705906 705907
DN025 29 x 1,5 29 26 100 50 702921 705908 705909
DN032 35 x 1,5 35 32 110 55 703032 705910 705911
DN040 41 x 1,5 41 38 120 60 702994 705912 705913
DN050 53 x 1,5 53 50 160 80 705878 705914 705915
DN065 70 x 2,0 70 66 210 105 705879 705916 705917
DN080 85 x 2,0 85 81 260 130 705880 705918 705919
DN100 104 x 2,0 104 100 310 155 705881 705920 705921
ISORohr-Øtube-Ø A B C C/2
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN008 13,5 x 1,6 13,5 10,3 64 32 704987 705922 705923
DN010 17,2 x 1,6 17,2 14,0 68 34 705882 705924 705925
DN015 21,3 x 1,6 21,3 18,1 72 36 705883 705926 705927
DN020 26,9 x 1,6 26,9 23,7 110 55 704112 705928 705929
DN025 33,7 x 2,0 33,7 29,7 120 60 704973 705930 705931
DN032 42,4 x 2,0 42,4 38,4 130 65 705884 705932 705933
DN040 48,3 x 2,0 48,3 44,3 130 65 704372 705934 705935
DN050 60,3 x 2,0 60,3 56,3 180 90 705885 705936 705937
DN065 76,1 x 2,0 76,1 72,1 220 110 705886 705938 705939
DN080 88,9 x 2,3 88,9 84,3 260 130 705887 705940 705941
DN100 114,3 x 2,3 114,3 109,7 320 160 705888 705942 705943
ASME-BPE
Rohr-Øtube-Ø A B C C/2
MB/MBArt.-Nr.
MB/K400item No
e-pol./K400Art.-Nr.
DN ½” 12,7 x 1,65 12,7 9,4 95 47,5 705889 705945 705946
DN ¾” 19,05 x 1,65 19,05 15,75 102 51,0 705890 705947 705948
DN 1” 25,4 x 1,65 25,4 22,1 108 54,0 704500 705949 705950
DN 1½” 38,1 x 1,65 38,1 34,8 120,5 60,25 705891 705951 705952
DN 2” 50,8 x 1,65 50,8 47,5 146 73,0 703598 705953 705954
DN 2½” 63,5 x 1,65 63,5 60,2 160 80,0 705892 705955 705956
DN 3” 76,2 x 1,65 76,2 72,9 170 85,0 705893 705957 705958
DN 4” 101,6 x 2,11 101,6 97,38 210 105,0 705894 705959 705960
5.6
MB - metallblank | bright shining
e-pol. - e-poliert | e-polished
K400 - geschliffen mit Korn 400 | ground with grain 400
weitere Abmessungen auf Anfrage | more dimensions on demand
STERI-Cross© kurz | short5.7
steriles Kreuzstück -kurz-,hergestellt aus Rohren gemäß DIN 11866
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: metallblank, gebeizt - Ra ≤ 0,8/0,8µmaußen: metallblank, gebeizt
für Orbitalschweißung vorbereitet
Toleranzen
DIN EN ISO 1127
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN) 1.4435
aseptic cross piece -short-,made of tubes according to DIN 11866
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2 labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: bright annealed, pickled - Ra ≤ 0,8/0,8µmoutside: bright annealed, pickled
prepared for orbital welding
tolerances
DIN EN ISO 1127
packaging
Welding ends covered with plastic caps, wrapped separately in plastic bag.
material (AISI)
316L
Legende
A Rohr-AußendurchmesserB Rohr-Innendurchmesser C Gesamtlänge D Länge Abgang
key
A outer tube diameterB inner tube diameterC total length D branch length
STERI-Cross©
sterile-Kreuzstücke -kurz- | aseptic cross pieces -short-
DINRohr-Øtube-Ø A B C D
Art.-Nr.item No
DN010 12 x 1,0 12 10 70 705850
DN010 13 x 1,5 13 10 70 705851
DN015 19 x 1,5 19 16 70 11,0 702984
DN020 23 x 1,5 23 20 80 13,0 702834
DN025 29 x 1,5 29 26 100 16,0 702929
DN032 35 x 1,5 35 32 110 19,5 703916
DN040 41 x 1,5 41 38 120 23,0 703532
DN050 53 x 1,5 53 50 160 30,0 705852
DN065 70 x 2,0 70 66 210 40,0 705853
DN080 85 x 2,0 85 81 260 47,5 705854
DN100 104 x 2,0 104 100 310 58,0 705855
ISORohr-Øtube-Ø A B C D
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 64 705856
DN010 17,2 x 1,6 17,2 14,0 68 10,1 705857
DN015 21,3 x 1,6 21,3 18,1 72 12,2 702907
DN020 26,9 x 1,6 26,9 23,7 110 15,0 705858
DN025 33,7 x 2,0 33,7 29,7 120 18,4 703093
DN032 42,4 x 2,0 42,4 38,4 130 23,2 703092
DN040 48,3 x 2,0 48,3 44,3 130 26,7 703096
DN050 60,3 x 2,0 60,3 56,3 180 33,7 705859
DN065 76,1 x 2,0 76,1 72,1 220 43,1 705860
DN080 88,9 x 2,3 88,9 84,3 260 49,5 704148
DN100 114,3 x 2,3 114,3 109,7 320 63,2 705861
ASME-BPE
Rohr-Øtube-Ø A B C D
Art.-Nr.item No
DN ½” 12,7 x 1,65 12,7 9,4 95,2 705862
DN ¾” 19,05 x 1,65 19,05 15,75 101,6 11,0 705863
DN 1” 25,4 x 1,65 25,4 22,1 108,0 14,2 704501
DN 1½” 38,1 x 1,65 38,1 34,8 120,6 21,1 705864
DN 2” 50,8 x 1,65 50,8 47,5 146,0 28,9 705865
DN 2½” 63,5 x 1,65 63,5 60,2 159,8 35,3 705866
DN 3” 76,2 x 1,65 76,2 72,9 171,4 43,1 705867
DN 4” 101,6 x 2,11 101,6 97,38 209,6 56,8 705868
5.7
weitere Abmessungen auf Anfrage | more dimensions on demand
6. Schaugläser | inspection glasses
6.1 Durchgangsschauglas | straight way sight glass
6.2 Bullaugenschauglas | sight glass
Schaugläser 6.
Durchgangsschauglas | straight way sight glass6.1
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD Flansch-Außendurchmesser
key
A outer tube diameterB inner tube diameterC total lengthD outer fl ange diameter
Durchgangsschauglas -Sterilausführung-, System KST, Flansch gefertigt aus Rundstahl nach DIN EN 10088-3, Borosilikat-Glas mit Kennzeichnung der Glasqualität und Abmessung
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen, einzeln in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435/1.4404
straight way sight glass -aseptic type-, system KST,fl ange made of tubular steel acc. to DIN EN 10088-3, borosilicate glass with labeling of the glass quality and the dimension
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: fi nely turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding ends covered with plastic caps,wrapped separately in plastic bag.
material (AISI) 316L
Abmessungen gemäß ASME-BPE sind ebenfalls erhältlich
dimensions according to ASME-BPE are also available
System KST
Durchgangsschauglas - Sterilausführung | straight way sight glass - aseptic type
DINRohr-Øtube-Ø A B C D
Art.-Nr.S-S
item NoG-G
Art.-Nr.G-B
DN010 13 x 1,5 13 10 144 65 700691 700701 700711
DN015 19 x 1,5 19 16 144 80 700692 700702 700712
DN020 23 x 1,5 23 20 148 80 700693 700703 700713
DN025 29 x 1,5 29 26 178 85 700694 700704 700714
DN032 35 x 1,5 35 32 178 100 700695 700705 700715
DN040 41 x 1,5 41 38 178 100 700696 700706 700716
DN050 53 x 1,5 53 50 181 110 700697 700707 700717
DN065 70 x 2,0 70 66 226 140 700698 700708 700718
DN080 85 x 2,0 85 81 246 150 700699 700709 700719
DN100 104 x 2,0 104 100 250 175 700700 700710 700720
ISORohr-Øtube-Ø A B C D
Art.-Nr.S-S
item NoG-G
Art.-Nr.G-B
DN008 13,5 x 1,6 13,5 10,3 144 65 700752 700764 700776
DN010 17,2 x 1,6 17,2 14,0 144 80 700753 700765 700777
DN015 21,3 x 1,6 21,3 18,1 144 80 700754 700766 700778
DN020 26,9 x 1,6 26,9 23,7 148 80 700755 700767 700779
DN025 33,7 x 2,0 33,7 29,7 178 85 700756 700768 700780
DN032 42,4 x 2,0 42,4 38,4 178 100 700757 700769 700781
DN040 48,3 x 2,0 48,3 44,3 178 100 700758 700770 700782
DN050 60,3 x 2,0 60,3 56,3 181 110 700759 700771 700783
DN065 76,1 x 2,0 76,1 72,1 226 140 700760 700772 700784
DN080 88,9 x 2,3 88,9 84,3 246 150 700761 700773 700785
DN100 114,3 x 2,3 114,3 109,7 250 175 700762 700774 700786
6.1
S-S beidseitig Orbitalschweißenden | orbital welding ends on both sides
G-G beidseitig Gewindestutzen | male part on both sides
G-B Gewindestutzen und Bundstutzen | male part and liner
weitere Abmessungen auf Anfrage | more dimensions on demand
Bullaugenschauglas | sight glass 6.2
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter DurchmesserE Sichtbereich-Durchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameterE visual range diameter
Bullaugenschauglas -Sterilausführung-, System KST, gefertigt aus Rundstahl nach DIN EN 10088-3, Borosilikat-Glas mit Kennzeichnung der Glasqualität und der Abmessung
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
für Orbitalschweißung vorbereitet
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen, in Folienbeutel verpackt.
Werkstoff (DIN)
1.4435/1.4404
sight glass -aseptic type-, system KST, made of tubular steel according to DIN EN 10088-3, borosilicate glass with labeling of the glass quality and the dimension
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
prepared for orbital welding
tolerances
DIN ISO 2768-1
packaging
Welding end covered with plastic cap,wrapped in plastic bag.
material (AISI) 316L
Abmessungen gemäß ASME-BPE sind ebenfalls erhältlich
dimensions according to ASME-BPE are also available
System KST
Bullaugenschauglas - Sterilausführung | sight glass - aseptic type
DINRohr-Øtube-Ø A B C D E
Art.-Nr.item No
DN025 29 x 1,5 29 26 51,5 55 21 700835
DN032 35 x 1,5 35 32 52,5 65 25 700836
DN040 41 x 1,5 41 38 53,5 70 25 700837
DN050 53 x 1,5 53 50 54,5 82 30 700838
DN065 70 x 2,0 70 66 72,0 105 35 700839
DN080 85 x 2,0 85 81 72,0 115 45 700840
DN100 104 x 2,0 104 100 75,0 145 55 700841
ISORohr-Øtube-Ø A B C D E
Art.-Nr.item No
DN025 33,7 x 2,0 33,7 29,7 51 55 21 700842
DN032 42,4 x 2,0 42,4 38,4 52 65 25 700843
DN040 48,3 x 2,0 48,3 44,3 53 70 25 700844
DN050 60,3 x 2,0 60,3 56,3 54 82 30 700845
DN065 76,1 x 2,0 76,1 72,1 82 105 35 700846
DN080 88,9 x 2,3 88,9 84,3 82 115 45 700847
DN100 114,3 x 2,3 114,3 109,7 84 145 55 700848
6.2
weitere Abmessungen auf Anfrage | more dimensions on demand
Ventile 7.
7. Ventile | valves
7.1 Ecküberströmventil | overfl ow valve
7.2 Bodensitzventil | bottom seat valve
7.3 Tellerrückschlagventil | non return disk valve
7.4 Probenahmeventil | sampling valve
Ecküberströmventil | overfl ow valve7.1
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeE EinbaumaßF Einbauhöhe
key
A outer tube diameterB inner tube diameterC total lengthE assembly dimensionF assembly level
Ecküberströmventil, System KST,gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen
Werkstoff (DIN)
1.4404
overfl ow valve, system KST, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
tolerances
DIN ISO 2768-1
packaging
welding end covered with plastic cap
material (AISI) 316L
weitere Anschlüsse und Einstellbereiche auf Anfrage
more connections and adjustment ranges on demand
System KST
Ecküberströmventil | overfl ow valve
DINRohr-Øtube-Ø A B C E F
Pbar
Art.-Nr.item No
DN010 13 x 1,5 13 10 200 26 174 0,5 - 6 704892
DN015 19 x 1,5 19 16 205 35 170 0,5 - 6 704893
DN020 23 x 1,5 23 20 210 40 170 0,5 - 6 704894
DN025 29 x 1,5 29 26 330 50 280 0,5 - 10 704895
DN032 35 x 1,5 35 32 335 55 280 0,5 - 10 704896
DN040 41 x 1,5 41 38 350 60 290 0,5 - 10 704897
DN050 53 x 1,5 53 50 365 70 295 0,5 - 8 704898
DN065 70 x 2,0 70 66 485 80 405 0,5 - 8 704899
DN080 85 x 2,0 85 81 545 90 455 0,5 - 6 704900
DN100 104 x 2,0 104 100 650 100 550 0,5 - 4 704901
ISORohr-Øtube-Ø A B C E F
Pbar
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,3 205 30 175 0,5 - 6 704902
DN010 17,2 x 1,6 17,2 14,0 200 30 170 0,5 - 6 704903
DN015 21,3 x 1,6 21,3 18,1 205 35 170 0,5 - 6 704904
DN020 26,9 x 1,6 26,9 23,7 320 40 280 0,5 - 6 704905
DN025 33,7 x 2,0 33,7 29,7 320 40 280 0,5 - 10 704906
DN032 42,4 x 2,0 42,4 38,4 340 50 290 0,5 - 10 704907
DN040 48,3 x 2,0 48,3 44,3 365 70 295 0,5 - 10 704908
DN050 60,3 x 2,0 60,3 56,3 485 80 405 0,5 - 8 704909
DN065 76,1 x 2,0 76,1 72,1 550 95 455 0,5 - 8 704910
DN080 88,9 x 2,3 88,9 84,3 570 115 455 0,5 - 6 704911
DN100 114,3 x 2,3 114,3 109,7 705 155 550 0,5 - 4 704912
7.1
P Druckeinstellbereich | pressure adjustment range weitere Abmessungen auf Anfrage | more dimensions on demand
Bodensitzventil | bottom seat valve
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größter Durchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameter
Bodensitzventil -Sterilausführung-, System KST, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen
Werkstoff (DIN)
1.4404
bottom seat valve -aseptic type-, system KST,made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: fi nely turned, Ra ≤ 1,6µm
tolerances
DIN ISO 2768-1
packaging
welding end covered with plastic cap
material (AISI)
316L
7.2
weitere Werkstoffe auf Anfrage
different materials on demand
weitere Abmessungen auf Anfrage | more dimensions on demand
System KST
Bodensitzventil - Sterilausführung | bottom seat valve - aseptic type
DINRohr-Øtube-Ø A B C D
Art.-Nr.item No
DN025 29 x 1,5 29 26 425 108 705497
DN032 35 x 1,5 35 32 430 108 705498
DN040 41 x 1,5 41 38 435 133 705499
DN050 53 x 1,5 53 50 450 146 705500
DN065 70 x 2,0 70 66 470 174 705501
DN080 85 x 2,0 85 81 620 186 705502
DN100 104 x 2,0 104 100 640 219 705503
ISORohr-Øtube-Ø A B C D
Art.-Nr.item No
DN020 26,9 x 1,6 26,9 23,7 425 108 705504
DN025 33,7 x 2,0 33,7 29,7 430 108 705505
DN032 42,4 x 2,0 42,4 38,4 435 133 705506
DN040 48,3 x 2,0 48,3 44,3 450 146 705507
DN050 60,3 x 2,0 60,3 56,3 470 174 705508
DN065 76,1 x 2,0 76,1 72,1 620 186 705509
DN080 88,9 x 2,3 88,9 84,3 640 219 705510
7.2
Tellerrückschlagventil | non return disk valve
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC GesamtlängeD größte Durchmesser
key
A outer tube diameterB inner tube diameterC total lengthD biggest diameter
Tellerrückschlagventil -Sterilausführung-, System KST, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen
Werkstoffe (DIN)
1.4435/1.4404 Gehäusehälften1.4435 Ventil1.4435 Führungsscheibe1.4401 Feder1.4308 ClampklammerEPDM-FDA Dichtung
non return disk valve -aseptic type-, system KST, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µm outside: refi ned turned, Ra ≤ 1,6µm
tolerances
DIN ISO 2768-1
packaging
welding end covered with plastic cap
materials (AISI)
316L valve halves316L valve316L valve holder316 plume304 clamp ringEPDM-FDA seal
7.3
Abmessungen gemäß ASME-BPE sind ebenfalls erhältlich
dimensions according to ASME-BPE are also available
System KST
Tellerrückschlagventil - Sterilausführung | non return disk valve - aseptic type
DINRohr-Øtube-Ø A B C D
Art.-Nr.S-S
item NoC-C
DN010 13 x 1,5 13 10 134 Ø 50,5 701604 701612
DN015 19 x 1,5 19 16 127 Ø 50,5 701605 701613
DN020 23 x 1,5 23 20 111 Ø 50,5 701606 701614
DN025 29 x 1,5 29 26 125 Ø 77,5 701607 701615
DN032 35 x 1,5 35 32 119 Ø 77,5 701608 701616
DN040 41 x 1,5 41 38 187 Ø 106 701609 701617
DN050 53 x 1,5 53 50 175 Ø 106 701610 701618
DN065 70 x 2,0 70 66 176 Ø 119 701611 701619
DN080 85 x 2,0 85 81 190 Ø 130 705049 705051
DN100 104 x 2,0 104 100 200 Ø 183 705050 705052
ISORohr-Øtube-Ø A B C D
Art.-Nr.S-S
item NoC-C
DN008 13,5 x 1,6 13,5 10,3 132 Ø 50,5 704623 704624
DN010 17,2 x 1,6 17,2 14,0 132 Ø 50,5 704607 704625
DN015 21,3 x 1,6 21,3 18,1 125 Ø 50,5 702497 703914
DN020 26,9 x 1,6 26,9 23,7 109 Ø 50,5 703773 703915
DN025 33,7 x 2,0 33,7 29,7 126 Ø 77,5 703774 704173
DN032 42,4 x 2,0 42,4 38,4 120 Ø 77,5 704622 704626
DN040 48,3 x 2,0 48,3 44,3 198 Ø 106 703772 704172
DN050 60,3 x 2,0 60,3 56,3 196 Ø 119 704621 704627
DN065 76,1 x 2,0 76,1 72,1 184 Ø 119 705492 704628
DN080 88,9 x 2,3 88,9 84,3 190 Ø 130 705493 705600
DN100 114,3 x 2,3 114,3 109,7 200 Ø 183 705494 705601
7.3
S-S beidseitig Orbitalschweißenden | orbital welding ends on both sides
C-C beidseitig Clampstutzen | ferrules on both sides
die Gehäusehälften können auch mittels Flanschen verbunden werden | the casing halves could also be connected by fl anges
weitere Anschlüsse auf Anfrage | more connections on demand
Probenahmeventil | sampling valve
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC Gesamtlänge
key
A outer tube diameterB inner tube diameterC total length
Probenahmeventil -Sterilausführung-, System KST, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißende mit Kunststoffkappe verschlossen
Werkstoffe (DIN)
1.4435/1.4404 VentilkörperPTFE Dichtung
sampling valve -aseptic type-, system KST,made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µmoutside: refi ned turned, Ra ≤ 1,6µm
tolerances
DIN ISO 2768-1
packaging
welding end covered with plastic cap
materials (AISI)
316L valve casingPTFE seal
7.4
abgebildete Variante mit „Ingold“-Stutzen
the shown type is made with „Ingold“-connection
System KST
Probenahmeventil – Sterilausführung | sampling valve - aseptic type
DINRohr-Øtube-Ø A B C
Art.-Nr.1.4435
item No1.4404
DN025 29 x 1,5 29 26 ca. 125 704109 704913
7.4
weitere Varianten auf Anfrage | more versions on demand
Kugelhähne 8.
8. Kugelhähne | ball valves
8.1 3-teiliger Kugelhahn | tripartite ball valve
3-teiliger Kugelhahn | tripartite ball valve8.1
Legende
A Rohr-AußendurchmesserB Rohr-InnendurchmesserC Gesamtlänge
key
A outer tube diameterB inner tube diameterC total length
3-teiliger Kugelhahn -Sterilausführung-, System KST, gefertigt aus Rundstahl nach DIN EN 10088-3
Abnahme
Abnahmeprüfzeugnis nach DIN EN 102043.1.B / 3.1.B AD (2000)-W2
Kennzeichnung
(Hersteller) (Werkstoff) (Abmessung) (Schmelze)
Oberfl ächen
innen: feinstgedreht, Ra ≤ 0,8µmaußen: feingedreht, Ra ≤ 1,6µm
Toleranzen
DIN ISO 2768-1
Verpackung
Schweißenden mit Kunststoffkappen verschlossen
Werkstoff (DIN)
1.4435
tripartite ball valve -aseptic type-, system KST, made of tubular steel according to DIN EN 10088-3
inspection
inspection certifi cate according to DIN EN 102043.1.B / 3.1.B AD (2000)-W2
labeling
(manufacturer) (material) (dimension) (heat)
surfaces
inside: ultra-fi ne turned, Ra ≤ 0,8µmoutside: refi ned turned, Ra ≤ 1,6µm
tolerances
DIN ISO 2768-1
packaging
welding ends covered with plastic caps
material (AISI) 316L
3-Wege Kugelhahn auf Anfrage
three-way ball valve on demand
weitere Abmessungen auf Anfrage | more dimensions on demand
System KST
3-teiliger Kugelhahn – Sterilausführung | tripartite ball valve - aseptic type
DINRohr-Øtube-Ø A B C
Art.-Nr.item No
DN010 13 x 1,5 13 10 97 705582
DN015 19 x 1,5 19 16 125 705583
DN020 23 x 1,5 23 20 133 705584
DN025 29 x 1,5 29 26 154 705585
DN032 35 x 1,5 35 32 154 705586
DN040 41 x 1,5 41 38 160 705587
DN050 53 x 1,5 53 50 180 705588
ISORohr-Øtube-Ø A B C
Art.-Nr.item No
DN008 13,5 x 1,6 13,5 10,2 97 705589
DN010 17,2 x 1,6 17,2 14,0 125 705590
DN015 21,3 x 1,6 21,3 18,1 133 705591
DN020 26,9 x 1,6 26,9 23,7 154 705592
DN025 33,7 x 2,0 33,7 29,7 154 705593
DN032 42,4 x 2,0 42,4 38,4 160 705594
DN040 48,3 x 2,0 48,3 44,3 180 705595
8.1
9. Montagezubehör | assembly accessories
9.1 Rohrschelle ohne Schaft | pipe clamp without shank
9.2 Rohrschelle mit Schweißschaft | pipe clamp with shank
9.3 Rohrschelle mit Gewindeschaft | pipe clamp with screwed shank
Montagezubehör 9.
Rohrschelle ohne Schaft | pipe clamp without shank9.1
Legende
A Rohr-AußendurchmesserE Bandbreite/-stärkeG Schraubengröße
key
A outer tube diameterE strip width/-strengthG bolt size
Rohrschelle ohne Schaft, poliert
Werkstoff (DIN)
1.4301
pipe clamp without shank, polished
material (AISI)
304
weitere Ausführungen auf Anfrage
different types on demand
weitere Abmessungen auf Anfrage | more dimensions on demand
pipe clamp without shank | Rohrschellen ohne Schaft
Rohrschelle ohne Schaft | pipe clamp without shank
DINRohr-Øtube-Ø A E G kg
Art.-Nr.item No
DN010 12 x 1,0 12 20 x 2 M6 0,030 703527
DN010 13 x 1,5 12 20 x 2 M6 0,030 703527
DN015 19 x 1,5 18 20 x 2 M6 0,040 703526
DN020 23 x 1,5 22 20 x 3 M6 0,060 704528
DN025 29 x 1,5 28 20 x 3 M6 0,070 705512
DN032 35 x 1,5 34 20 x 3 M6 0,080 705513
DN040 41 x 1,5 40 20 x 3 M6 0,090 705514
DN050 53 x 1,5 52 20 x 3 M6 0,120 702942
DN065 70 x 2,0 70 20 x 3 M6 0,150 705515
DN080 85 x 2,0 85 25 x 3 M6 0,190 705516
DN100 104 x 2,0 104 25 x 3 M6 0,240 705517
ISORohr-Øtube-Ø A E G kg
Art.-Nr.item No
DN008 13,5 x 1,6 12 20 x 2 M6 0,030 705518
DN010 17,2 x 1,6 18 20 x 2 M6 0,040 705670
DN015 21,3 x 1,6 22 20 x 3 M6 0,060 703009
DN020 26,9 x 1,6 26,9 25 x 3 M6 0,070 703015
DN025 33,7 x 2,0 33,7 25 x 3 M6 0,080 703008
DN032 42,4 x 2,0 42,4 25 x 3 M6 0,095 705062
DN040 48,3 x 2,0 48,3 25 x 3 M6 0,110 705063
DN050 60,3 x 2,0 60,3 25 x 3 M6 0,120 705064
DN065 76,1 x 2,0 76,1 25 x 3 M6 0,175 703014
DN080 88,9 x 2,3 88,9 25 x 3 M6 0,200 705065
DN100 114,3 x 2,3 114,3 25 x 3 M6 0,265 705066
ASME-BPE
Rohr-Øtube-Ø A E G kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12 20 x 2 M6 0,030 705521
DN ¾” 19,05 x 1,65 18 20 x 2 M6 0,040 705522
DN 1” 25,4 x 1,65 25,4 20 x 3 M6 0,050 705523
DN 1½” 38,1 x 1,65 38,1 20 x 3 M6 0,070 705524
DN 2” 50,8 x 1,65 50,8 20 x 3 M6 0,080 705525
DN 2½” 63,5 x 1,65 63,5 20 x 3 M6 0,090 705526
DN 3” 76,2 x 1,65 76,2 25 x 3 M6 0,150 705527
DN 4” 101,6 x 2,11 101,6 25 x 3 M6 0,225 705528
9.1
Rohrschelle mit Schweißschaft | pipe clamp with shank
Legende
A Rohr-AußendurchmesserB Schaft-DurchmesserC GesamtlängeE Bandbreite/-stärkeG Schraubengröße
key
A outer tube diameterB shank diameterC total lengthE strip width/-strengthG bolt size
Rohrschelle mit Schweißschaft, poliert
Werkstoff (DIN)
1.4301
pipe clamp with shank, polished
material (AISI)
304
9.2
weitere Ausführungen auf Anfrage
different types on demand
weitere Abmessungen auf Anfrage | more dimensions on demand
pipe clamp with shank | Rohrschellen mit Schweißschaft
Rohrschelle mit Schweißschaft | pipe clamp with shank
DINRohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN010 12 x 1,0 12 8 63 20 x 2 M6 0,060 705550
DN010 13 x 1,5 12 8 63 20 x 2 M6 0,060 705550
DN015 19 x 1,5 18 8 66 20 x 2 M6 0,070 705551
DN020 23 x 1,5 22 8 69 20 x 3 M6 0,090 705552
DN025 29 x 1,5 28 10 72 20 x 3 M6 0,110 705553
DN032 35 x 1,5 34 10 75 20 x 3 M6 0,120 705554
DN040 41 x 1,5 40 10 78 20 x 3 M6 0,130 705555
DN050 53 x 1,5 52 12 84 20 x 3 M6 0,160 705556
DN065 70 x 2,0 70 12 93 20 x 3 M6 0,190 705557
DN080 85 x 2,0 85 12 100 25 x 3 M6 0,250 705558
DN100 104 x 2,0 104 12 110 25 x 3 M6 0,290 705559
ISORohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN008 13,5 x 1,6 12 8 63 20 x 2 M6 0,060 705562
DN010 17,2 x 1,6 18 8 66 20 x 2 M6 0,070 705563
DN015 21,3 x 1,6 22 8 69 20 x 3 M6 0,090 705564
DN020 26,9 x 1,6 26,9 10 70 25 x 3 M6 0,110 705565
DN025 33,7 x 2,0 33,7 10 72 25 x 3 M6 0,130 705566
DN032 42,4 x 2,0 42,4 10 75 25 x 3 M6 0,155 705567
DN040 48,3 x 2,0 48,3 10 78 25 x 3 M6 0,175 705568
DN050 60,3 x 2,0 60,3 12 84 25 x 3 M6 0,190 705569
DN065 76,1 x 2,0 76,1 12 93 25 x 3 M6 0,240 705570
DN080 88,9 x 2,3 88,9 12 100 25 x 3 M6 0,280 705571
DN100 114,3 x 2,3 114,3 12 110 25 x 3 M6 0,355 705572
ASME-BPE
Rohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12 8 63 20 x 2 M6 0,060 705574
DN ¾” 19,05 x 1,65 18 8 66 20 x 2 M6 0,070 705575
DN 1” 25,4 x 1,65 25,4 10 72 20 x 3 M6 0,095 705576
DN 1½” 38,1 x 1,65 38,1 10 78 20 x 3 M6 0,110 705577
DN 2” 50,8 x 1,65 50,8 12 84 20 x 3 M6 0,125 705578
DN 2½” 63,5 x 1,65 63,5 12 93 20 x 3 M6 0,150 705579
DN 3” 76,2 x 1,65 76,2 12 100 25 x 3 M6 0,270 705580
DN 4” 101,6 x 2,11 101,6 12 110 25 x 3 M6 0,300 705581
9.2
Rohrschelle mit Gewindeschaft | pipe clamp with screwed shank
Legende
A Rohr-AußendurchmesserB Schaft-DurchmesserC GesamtlängeE Bandbreite/-stärkeG Schraubengröße
key
A outer tube diameterB shank diameterC total lengthE strip width/-strengthG bolt size
Rohrschelle mit Gewindeschaft, poliert
Werkstoff (DIN)
1.4301
pipe clamp with screwed shank, polished
material (AISI)
304
9.3
weitere Ausführungen auf Anfrage
different types on demand
weitere Abmessungen auf Anfrage | more dimensions on demand
pipe clamp with screwed shank | Rohrschellen mit Gewindeschaft
Rohrschelle mit Gewindeschaft | pipe clamp with screwed shank
DINRohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN010 12 x 1,0 12 M8 94 20 x 2 M6 0,040 701565
DN010 13 x 1,5 12 M8 94 20 x 2 M6 0,040 701565
DN015 19 x 1,5 18 M8 97 20 x 2 M6 0,065 701566
DN020 23 x 1,5 22 M8 99 20 x 3 M6 0,080 701620
DN025 29 x 1,5 28 M10 102 20 x 3 M6 0,100 701621
DN032 35 x 1,5 34 M10 105 20 x 3 M6 0,110 701622
DN040 41 x 1,5 40 M10 108 20 x 3 M6 0,115 701623
DN050 53 x 1,5 52 M12 114 20 x 3 M6 0,130 701624
DN065 70 x 2,0 70 M12 123 20 x 3 M6 0,160 701625
DN080 85 x 2,0 85 M12 130 25 x 3 M6 0,280 702508
DN100 104 x 2,0 104 M12 140 25 x 3 M6 0,320 702509
ISORohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN008 13,5 x 1,6 12 M8 95 20 x 2 M6 0,040 705529
DN010 17,2 x 1,6 18 M8 95 20 x 2 M6 0,065 705530
DN015 21,3 x 1,6 22 M8 100 20 x 3 M6 0,080 705531
DN020 26,9 x 1,6 28 M10 100 25 x 3 M6 0,100 705532
DN025 33,7 x 2,0 33,7 M10 102 25 x 3 M6 0,140 705533
DN032 42,4 x 2,0 42,4 M10 105 25 x 3 M6 0,150 705534
DN040 48,3 x 2,0 48,3 M10 108 25 x 3 M6 0,160 705535
DN050 60,3 x 2,0 60,3 M12 114 25 x 3 M6 0,200 705536
DN065 76,1 x 2,0 76,1 M12 123 25 x 3 M6 0,220 705537
DN080 88,9 x 2,3 88,9 M12 130 25 x 3 M6 0,300 705538
DN100 114,3 x 2,3 114,3 M12 140 25 x 3 M6 0,355 705539
ASME-BPE
Rohr-Øtube-Ø A B C E G kg
Art.-Nr.item No
DN ½” 12,7 x 1,65 12 M8 94 20 x 2 M6 0,040 705541
DN ¾” 19,05 x 1,65 18 M8 97 20 x 2 M6 0,065 705542
DN 1” 25,4 x 1,65 25,4 M10 102 20 x 3 M6 0,100 705543
DN 1½” 38,1 x 1,65 38,1 M10 108 20 x 3 M6 0,115 705544
DN 2” 50,8 x 1,65 50,8 M12 114 20 x 3 M6 0,130 705545
DN 2½” 63,5 x 1,65 63,5 M12 123 20 x 3 M6 0,160 705546
DN 3” 76,2 x 1,65 76,2 M12 130 25 x 3 M6 0,280 705547
DN 4” 101,6 x 2,11 101,6 M12 140 25 x 3 M6 0,320 705548
9.3