PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY

18" FRAME WIDTH

13" FRAM

E HEIG

HT

Designer Series, Raised Style - 18" x 13" Height Double Drawer

13" Height Double DrawerItem No. DE-DD13

18" WIDTH x13" HEIGHT x23" DEPTH (PRODUCT SIZE) 16-1/2" WIDTH x11" HEIGHT x22" DEPTH (CUT-OUT)

Product Dimensions Product Features

16-1/2" WIDTH

HAVE 22" CLEARANCE

INSIDE DEPTH

INSERT CABINET

ISLAND WALL CUT-OUT SIZE IS 16-1/2" WIDTH BY 11" HEIGHT BY 22" DEPTH

USE DRILL TO SECURE SCREWSIN PLACE THROUGH HOLES

SCREW NOT INCLUDED

ADJUSTABLE LEG

USE GLOVE TO HAND SCREWPEG-LEG DOWN TO FLOORBASE - USE LEVELER TO CONFIRM ELEVATION

23" DEPTH

ROD HANDLE

11" HEIGHT

REMOVE ALLDRAWERSSee SUNSTONE website for drawer removal tutorial

SOFT-CLOSING DRAWER TRACK

COMPONET FEATURESA 1/16" RAISED FRAMEVISIBLE EDGE ENABLINGYOU TO PLACE TWO OR MORE COMPONETS SIDEBY SIDE OR ONTOP OF ONE ANOTHER CREATINGONE SINGLE LARGERFUNCTIONING COMPONETOF YOUR OWN CHOOSING

DRAWERS STACK ONTOP OF ONE ANOTHER, ADJUSTPEG-LEGS BETWEEN EACH DRAWER BOX

DE-DD13ON TOP

DE-DD13ON BOTTOM

COMBINE MULTIPLE COMPONENTS TOGETHERINTO UNLIMITED COMBINATIONS

2. REMOVE DRAWERS 3. MOUNT DRAWER & LOWER LEGS1 . INSERT COMPONET

REMOVE DRAWERS IN ORDER TO MOUNT BOX• Pull the drawer fully

open so Levers are visible.

• Push "DOWN" on the right lever, and "UP" on the left lever.

• Holding levers in place, pull drawer toward you.

Product Installation See SUNSTONE manufacture website for additional product support and product tutorials: www.sunstonemetalproducts.com

IMPORTANT!! - ROD HANDLES ARE MOUNTED TO INSIDE OF EACH PANEL, YOU MUST UNSCREW EACH ONE AND MOUNT ON OUTSIDE OF DRAWER OR DOOR PANEL.

Frame is made from 16 gauge 304 SS, and panel's are made from 18 gauge 304 SS. Inside Drawer Box is made with 20 gauge 201 SS. Handle is Solid 304 SS.

• EXTERIOR FINISH -----------------3 YEARS• ROD HANDLES---------------------3 YEARS • DRAWER TRACK------------------ 1 YEAR• PEG-LEGS--------------------------- 1 YEAR