Einbauanleitung Installation Manual
Instruction de montageManuale di installazione
33301 Graupner HoTT mx-16 / mx-16 iFS Module 1. 2.
3. 4.
x
x 5. 6.
mx-16smx-16 iFS
rot - gelb - schwarz red - yellow - blackrouge - vert - noirrosso - giallo - nero
1:1
ablötendesolderdessoudersaldare
lötensoldersoudersaldare
7. 8.
9. 10.
11. 12.
13. INITIALISIERUNG - INITIALISATION - INIZIALIZZIONEInitialisierung: Um eine Initialisierung bzw. ein Zurücksetzen auf die Werkseinstellungen durchzuführen, drücken und halten Sie den BIND/RAN-GE-Taster auf der Rückseite des Senders, während Sie den Sender einschalten. Lassen Sie anschließend den BIND/RANGE-Taster wieder los.Lesen Sie dazu auch das entsprechende Kapitel in der Fernsteuerungsanleitung!
Initialisation: To initialise the system, i.e. to reset it to the factory default settings, locate the BIND / RANGE button on the back of the transmitter, hold it pressed in while you switch the transmitter on, then release the BIND / RANGE button again.Please refer to the appropriate section in your RC system instructions for the procedure.
Initialisation: Pour effectuer un réinitialisation et pour revenir aux réglages d’origine (d’usine) appuyez sur la touche BIND/RANGE située au dos de votre émetteur et maintenez-la enfoncée pendant que vous allumez votre émetteur. Relâchez en suite la touche.Reportez-vous au chapitre de la notice de votre émetteur qui traite ce sujet!
Inizializzazione: Per l’inizializzazione premete e tenete premuto il tasto BIND/RANGE sul retro della trasmittente mentre accendete la trasmittente. Rilasciate poi di nuovo il tasto BIND/RANGE.A tal fi ne leggere anche il rispettivo capitolo nelle istruzioni del telecomando!
1
2
3
54
6
1 6