435 Aluminium Foil Sound Damping Tape
Product Data SheetUpdated : March 1996Supersedes : October 1993
Product Description A pressure sensitiveadhesive coated on a thicksoft aluminium foil with anexceptional ability to dampresonant vibrations over awide temperature range.
Physical PropertiesNot for specification purposes
Adhesive Type Synthetic rubber
Backing Aluminium foil
Thickness (ASTM D-3652) 200 µm
Weight 0.067 g/cm²
Release Liner Polyethylene
Tape Colour Silver
Shelf Life 12 months from date of despatch by 3M when stored in theoriginal carton at 21°C (70°F) & 50 % Relative Humidity
PerformanceCharacteristicsNot for specification purposes
Adhesion to StainlessSteel ASTM D-3330
7.2 N/10mm
Tensile StrengthASTM D-3759
142 N/10mm
Elongation at BreakASTM D-3759
13.0 %
Temperature RangeMaximumMinimum
120 °C-55 °C
2
Date : March 1996Y435 Aluminium Foil Sound Damping Tape
Application Techniques The tape should always beapplied to a clean drysurface. All edges must befirmly pressed down. Thepolyethylene liner eliminateswrinkles on unwind thusimproving the smoothnessof the tape on applicationand its handlingcharacteristics.
Tape can be applied downto -20°C but poor results willoccur below 5°C unlessspecial precautions aretaken to eliminate the thinfilm of condensed moisturefound on surfaces at suchtemperatures.
Applications These tapes are designed tomeet the increasing demandfor noise reduction. Basedupon aluminium foil they arespecifically suitable forapplications where a highratio of noise reduction tounit weight is required.Even when exposed torelatively high operatingtemperatures and usualaircraft solvents the longageing adhesive retains itsdamping characteristics.With the added feature of aliner the tape can be die cut.
Damping performance canbe improved by applyingmulti-layers of tape therebyincreasing the overallthickness of the constrainedlayers.
The sound damping tapesperform over a relativelybroad temperature rangebetween -50°C to +30°C.
These tapes arepredominantly used invibration dampingapplications. They are usedto eliminate fatigue cracksdue to vibration of skins,panels etc. Specifically thetapes are used on aircraft,cars, dishwashers andrefrigerators.
Additionally they are usedfor sealing and joining in theconstruction industry and asa moisture vapour barrier.
3M is a trademark of the 3M Company.
Values presented have been determined by standard test methods and are average values not to be used for specification purposes.Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests todetermine their suitability for your applications.This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of ourrecommendations.
Specialty Tapes & Adhesives 3M United Kingdom PLC 1996
3M United Kingdom PLC3M House,28 Great Jackson Street,Manchester,M15 4PA
Customer Service :
Tel 0161 236 8500Fax 0161 237 1105
3M Ireland3M House, Adelphi Centre,Upper Georges Street,Dun Laoghaire,Co. Dublin,Ireland
Customer Service :
Tel (01) 280 3555Fax (01) 280 3509