Acid Mine Drainage Excercise11.12.2014
H-ESD : Environmental and Sustainable Development
Michael Staudt, GTK
4BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Acid Drainage• Caused by the oxidation of sulphide minerals, especially iron sulphides,
associated with mining– Oxidation produces sulphate ion which when dissolved in water
forms sulphuric acid• Some effects:
– Acid drainage affects water quality downstream– Rehabilitation becomes more difficult– Metal ions are released
• Acid drainage is one of the most significant environmental issues facing the mining industry. – Canadian liability estimated as C$ 2-5 billion– Australian liability estimated as A$ 60M/year– in the USA 20,000 km of streams and rivers adversely affected
5BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• Acid drainage may not develop immediately
• Acid drainage can continue for tens to thousands of years– Rio Tinto region, Spain;
for more than 2000 years
– Many examples more than 50 years with little reduction in rate of acidic drainage
Longevity of the Problem
6BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• Oxidation of sulphidic minerals, especially in connection with mining– Exposure to air and water– Increase in surface area– Reactive minerals
• Pyrite (iron sulphide) most common sulphide mineral associated with mines
• Other iron and other metal sulphides
• Drainage of acid away from its source
What is Acid Drainage?
FeS2 + 3.75 O2 + 3.5 H2O = Fe(OH)3 + 2 SO42- + 4 H+
(Iron sulphide + Oxygen + Water = Ferric Hydroxide + Aqueous sulphuric acid)
7BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• Water (required for oxidation and transport)• Oxygen availability• Physical characteristics of the material• Temperature, pH• Ferric (Fe+3)/ferrous (Fe+2) ion equilibrium• Microbiological activity• Presence of neutralising minerals
– Carbonates are most effective– Silicates & aluminosilicates may contribute
• Chemistry of receiving waters
Factors Influencing Acid Drainage
8BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• Potential for reuse of water on mine is limited– corrosion problems for equipment
• Toxic effects to aquatic ecosystems– acidity and dissolved metals
• Toxic effects on downstream vegetation• Adverse impacts on ground water• Limits uses of downstream water
– Irrigation, stock watering, recreation, fishing
• Causes difficulties in revegetation and stabilising mine wastes
Impacts of Acid Drainage
9BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• During feasibility stages:– Characterise acid
generating potential of materials
– Characterise mobility of potential contaminants such as heavy metals
– Estimate the potential for oxidation products to migrate to the environment
– Estimate effects on host environment
Best Practice Approach
10BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
• When characterising rock types at site important characteristics include:– Geological description– Mineralogy of both ore and waste– Fracturing
• Sampling and analysis:– Acid-base accounting– Simulated oxidation, usually with hydrogen peroxide – pH and conductivity tests of paste or slurry – Total and soluble metal analysis – Geochemical Kinetic Tests
• Humidity cells• Column Leach Tests
Identifying and Predicting Acid Drainage
11BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Acid Drainage Control Strategies
• Control requires:– Data on physical and chemical properties of materials– Risk assessment– Strategies to minimise oxidation
• Control strategies– Containment and isolation– Treatment of acid drainage
12BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Soil Covers
• Materials– Imported materials e.g. clay, soil– Low-sulphide waste rock, if compactable– Geotextile fabrics– Covers may require zones
• Base (main sealing) layer - high water retention, low permeability
• Middle layer - water reservoir (may have higher permeability)• Surface layer (barrier zone) - erosion protection and/or
substrate for plant growth
13BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Isolation
Sulphidic waste
Top non-sulphidic waste layer
Basal layer
Revegetated and contoured cover material(surface capping and water storage medium)
Original ground surface
Freedumpednon-sulphidicwaste
Freedumpednon-sulphidicwaste
14BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Water Covers Blending
• Most readily used in high rainfall, low evaporation areas
• Creation of a permanent lake or swamp
• Use of an existing lake or the sea
• Flooding of underground tunnels and pits
• Mixing of acid and non-acid forming waste rock• Incorporation of alkaline materials
• Lime• Fly ash• Kiln dust
15BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Bacterial Inhibition
• Bacteria can catalyse sulphide oxidation• Applying bactericides can slow the process• Effect may be short-term only• Some success claimed in USA coal industry• Used in establishing a vegetation cover before acid
production starts
16BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Treatment Systems
• Collection of acid drainage followed by neutralisation– Passive Anoxic Limestone Drains (PALID)
• Drainage passed through a channel of coarse limestone gravel in the absence of oxygen
– Successive Alkalinity Producing Systems (SAPS)• Variation on PALID
– Wetland treatment systems
• Newer treatments, moving from experimental to operational– Bioreactors– KAD (kaolin amorphous derivative)– Bauxite derivatives– ‘Green rust’ precipitation
17BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Passive Treatment Systems
Cross section through an anoxic limestone drain
18BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Treatment Systems
Conceptual design of a wetland system for treating Acid Mine Drainage
19BEST PRACTICE ENVIRONMENTAL MANAGEMENT IN MINING
Monitoring• An essential component of sulphidic waste management
– Classification of materials– Point source monitoring – Monitoring surface water and ground water in both up- and
down-stream gradients– Monitoring of effectiveness of control measures
Waters:•pH, conductivity, SO4-2 •Other major ions (Ca+2, Mg+2, Al+3, Na+, K+)•Alkalinity•Metals/metalloids (Fe, Al, As, Cd, Cu, Zn, Mn, Pb)•Toxicity to organisms
Rock materials:•Static and kinetic geochemical tests•Water flux through stockpiles•Physical stability: cracking, erosion
Step 3: Calculate sulfate release from pyrite , accounting for sulfate release
from chalcopyrite (2 S for each Cu in CuFeS2
Equations
2.1. 2FeS2 + 7O2 + 2H2O -> 2Fe 2+ + 4 SO4
2- + 4H+
2.2 2Fe2+ + 1/2 O2 + 2H+ -> 2Fe3+ + H2O
3. 2 Fe3+ + 6H2O -> 2 Fe(OH)3 + 6H+
Recommended