www.blagdonpump.comwww.blagdonpump.com2
Blagdon – The Company
BLAGDON PUMP (IDEX ECO - European Commercial Operations) IDEX LACO (Latin America Commercial Operations)IDEX ACO (Asian Commercial Operations)
Our BackgroundBlagdon Pump was founded in the early 1950’s in the North East of England as a specialist pump manufacturer. In 1979 production of AIR OPERATED DOUBLE DIAPHRAGM PUMPS commenced and we soon became the market leader. In 1997 the US based multinational “IDEX Corporation” acquired Blagdon Pump to strengthen their global position in the double diaphragm market. Blagdon Pump transferred operations to Ireland in 2009.
We are committed to offering a dedicated sales and after sales service that is second to none and you can keep up to date with developments on our website, www.blagdonpump.com.
Blagdon Pump is dynamic and evolving. Our aim is make dealing with us an easy and efficient experience – a service you can rely on for all your pump requirements.
Our MissionThe one company that will deliver highly engineered fluid moving solutions and service in niche markets and extreme condition environments.
Our WebsiteWe are committed to offering you a dedicated sales and after sales service which is second to none. Now you can keep up to date with developments as they happen with our WEBSITE.
There is a lot happening at Blagdon Pump.We aim to make dealing with us a more efficient experience. A service you can rely on for all your pump requirements.
We look forward to dealing with you.
Our Locations
www.blagdonpump.comwww.blagdonpump.com 3
The Products
Download individual specificationsheets from our website.
Air operated double diaphragm pumps have long been recognised as the "work horse" of industry for handling "difficult" liquids at relatively low pressures and flows. The range of applications is virtually limitless. Blagdon AODD pumps come in many sizes and choices of materials of construction. Almost every type of liquid from highly corrosive acids through high viscosity paints and adhesives, to food and drink products can be pumped.
Blagdon 1/2 ", 1" and 2" EHEDG Approved Hygienic Pumps in Polished 316L Stainless Steel
Blagdon 1" and 2" High Pressure 2:1 Pumps availablein Aluminium, Stainless Steel
BLAGDON 1/2”, 1”, 1 1/2”, 2” FDA Compliant Pumps inPolished Steel plus assorted standard fluid fittings
Blagdon Non-metallic Pumps available in Conductive Polypropylene,Polypropylene and Kynar (PVDF) from 1/4" to 2”
Blagdon Metallic Pumps available in Aluminium,Cast Iron, Stainless Steel from 1/4" to 3”
www.blagdonpump.comwww.blagdonpump.com4
The benefits you get from Blagdon Pump
How the double diaphragm system worksThe Blagdon pump is basically two pumps in one. Chambers A&B are alternatively filled and emptied by drawing fluid in through a common inlet (C) and out through a common outlet (D). The diaphragms in each chamber are linked by a common shaft so that they move backwards and forwards in unison. Compressed air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flowrate can be infinitely controlled by increasing or decreasing air pressure and / or volume.
Operation sequenceThe red arrows show the pump cycle. Fluid is being drawn into inlet (C) by the suction stroke of the diaphragm in chamber B, which opens the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is closed by the diaphragm suction.
In chamber (A) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (3) to the liquid outlet (D). This discharge stroke closes ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow to outlet D.
Standard Blagdon pumps are 1:1 ratio. Maximum outlet pressure cannot exceed air supply pressure. Blagdon also offer 2:1 ratio high pressure pumps.
Blagdon offer an extensive pump range for handling fluid media safely and cost effectively. We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A flexible modular design of pumps means we can offer short lead times and a high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintenance or a technical enquiry. We offer a fast spares delivery service, many items being in stock for immediate delivery.
11 key features and benefits of a Blagdon Pump 1. Blagdon pumps can run dry without damage or danger.2. They are fully submersible.3. They are designed to operate at low noise levels.4. They have leak-free air valves that are easily removed for servicing.5. They can be easily maintained. They can be stripped down quickly without
any specialist tools.6. They are self-priming to over 6 metres.7. They are pressure balanced. They stall if discharge is closed and restart
when discharge is opened so avoiding heat build up and wearing of components.8. They have minimum product agitation.9 . They have long stroke, slow speed cycling capability for low initial break out.10. They are portable and compact, can be remotely controlled and fully packaged.11. Safe in hazardous areas, no sparking, air-driven.
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com
A full list of chemicals and recommended elastomers is available on request, or our sales office can advise on the best pump and materials for specific media.
Typical range of products you can pump.
Clay slip, titanium dioxide, mill scale.
All mineral and organic acids.Solvent and water based. Chemicals.Acids.
Cement, mortar.Slip, glazes, clay.
Creams, emulsions, detergents.
Mud, grout, lubricants.Soft drinks, spirits, beer, wine,
milk.Suspensions of gun
powder, explosives, etc.Liquid and semi-solid foods,
flavourings.Printing inks, dryers, dyes,
sizes and solvents.Petrol, diesel, hydraulic and cutting
oils, lube oils, animal and vegetable oils and greases.
Emulsions, latexes, pigments, solvents, resins, thinners.
Liquids, creams and compounds.
Aggressive acids, salts, sludge and effluents.
Paper, wood, sizes, bleaches.Natural and synthetics, water
and solvent based, monomeric and polymeric plastics.
Gum, latex.Sewage, effluents,
coal and lime slurry.Aromatic and aliphatics,
ketones, aldehydes, esters and chlorinated hydrocarbons, de-icing fluids.
Creosote, turpentine, copper napthenate.
All types.
ABRASIVES:
ACIDS: ADHESIVE: ALCOHOLS: CAUSTICS: CEMENT: CERAMICS: COSMETICS:
DRILLING: DRINKS:
EXPLOSIVES:
FOODS:
INKS & DYES:
OILS:
PAINT:
PHARMACEUTICALS:
PLATING:
PULPS: RESINS:
RUBBER: SLUDGE & WASTE:
SOLVENTS:
TIMBER PRESERVATIVES:
WATER:
Pump DutiesBlagdon pumps can be installed in any of the models illustrated to perform the following duties: Liquid Transfer, Slurry Handling, Filter Feeding, Circulation, De-watering, Low Pressure Spray Supply, Tank/Sump/Barrel/Drum Filling and emptying, Batching/Mixing/Metering/Dosing, and Chemical Injection etc.
SAFE FOR HAZARDOUS AREASSAFE FOR HAZARDOUS AREASPERMANENT OR PORTABLE OPTIONSPERMANENT OR PORTABLE OPTIONS
SUBMERGED OPERATIONSUBMERGED OPERATION
SELF PRIMINGSELF PRIMING FILLING/INJECTION/DOSINGFILLING/INJECTION/DOSING
HOPPER TYPE FOR HIGH VISCOSITYHOPPER TYPE FOR HIGH VISCOSITY
5
The media Blagdon Pump can handle
How the double diaphragm system worksThe Blagdon pump is basically two pumps in one. Chambers A&B are alternatively filled and emptied by drawing fluid in through a common inlet (C) and out through a common outlet (D). The diaphragms in each chamber are linked by a common shaft so that they move backwards and forwards in unison. Compressed air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flowrate can be infinitely controlled by increasing or decreasing air pressure and / or volume.
Operation sequenceThe red arrows show the pump cycle. Fluid is being drawn into inlet (C) by the suction stroke of the diaphragm in chamber B, which opens the ball valve (2) to allow liquid to enter the chamber. Ball valve (4) is closed by the diaphragm suction.
In chamber (A) air has been applied to the rear of the diaphragm to force out the liquid in the chamber through the ball valve (3) to the liquid outlet (D). This discharge stroke closes ball valve (1) to prevent further liquid entering the chamber. This cycle is repeated to provide a continuous flow to outlet D.
Standard Blagdon pumps are 1:1 ratio. Maximum outlet pressure cannot exceed air supply pressure. Blagdon also offer 2:1 ratio high pressure pumps.
Blagdon offer an extensive pump range for handling fluid media safely and cost effectively. We offer low cost ownership, by combining high quality wear parts with low price spares and a vast array of accessories. A flexible modular design of pumps means we can offer short lead times and a high degree of customising opportunities. Our experienced staff can provide instant support for installation, servicing, maintenance or a technical enquiry. We offer a fast spares delivery service, many items being in stock for immediate delivery.
11 key features and benefits of a Blagdon Pump 1. Blagdon pumps can run dry without damage or danger.2. They are fully submersible.3. They are designed to operate at low noise levels.4. They have leak-free air valves that are easily removed for servicing.5. They can be easily maintained. They can be stripped down quickly without
any specialist tools.6. They are self-priming to over 6 metres.7. They are pressure balanced. They stall if discharge is closed and restart
when discharge is opened so avoiding heat build up and wearing of components.8. They have minimum product agitation.9 . They have long stroke, slow speed cycling capability for low initial break out.10. They are portable and compact, can be remotely controlled and fully packaged.11. Safe in hazardous areas, no sparking, air-driven.
BlagdonPortfolio Information
Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specific Gravity
Aggressive chemicals and most solvents. High temperature uses
N/A
Caustic solutions and dilute acids. Excellent abrasion resistance
Aggressive chemicals and solvents but with low abrasion resistance
Excellent abrasion resistance, dirty water, oils and hydrocarbons
High mechanical strength. Suitable with most oils, solvents and hydrocarbons
Excellent abrasion resistance. Widely used in the ceramics industry on dirty water, clays, grout etc
General purpose for use on water, most hydrocarbons and mild chemicals
Caustic solutions and dilute acids. Poor on oils and solvents
General purpose for use on water, most hydrocarbons and mild chemicals
Main Properties and Uses Min Optimum
Operating Temperatures
DiaphragmPump Model/Size/Material
-18F-28C-11F-24C
50 to 140F10 to 60C50 to 140F10 to 60C50 to 140F10 to 60C50 to 130F10 to 54C50 to 130F10 to 54C50 to 130F10 to 54C50 to 212F10 to 100C50 to 140F10 to 60C
-10F-23C-4F
-20C-40F-40C-40F-40C32F0C
-10F-23CN/A N/A
0F-18C
Elastomer
Buna-N
EPDM
Geolast
Neoprene
Polyester
Polyurethane
PTFE
Santoprene
Stainless Steel
Viton
B06 - 1/4" Stainless Steel
B25 - 1” Aluminium
B40 - 1 1/2” Stainless Steel
X75 - 3” Cast Iron
B15 - 1/2” Polypropylene
B50 - 2” PVDF
B25 - 1” Full Flow 2:1
B50 - 2” Stainless Steel
B15 - 1/2” Aluminium
Met
allic
Pum
psN
on-M
etal
lic P
umps
Hygi
enic
Pum
psFD
APu
mps
High
Pres
sure
Pum
ps
PTFE
Pu
mps
B40 - 1 1/2” Aluminium
B50 - 2” Stainless Steel
B06 - 1/4" PVDF
B25 - 1” PVDF
B50 - 2” Hygienic
B25 - 1” Stainless Steel
B25 - 1” Conductive PTFE
B25 - 1” Cast Iron
B50 - 2” Aluminium
X75 - 3” Stainless Steel
B15 - 1/2” PVDF
B15 - 1/2” Hygienic
B50 - 2” Full Flow 2:1
B15 - 1/2” Conductive PTFE
B15 - 1/2” Stainless Steel
B40 - 1 1/2” Cast Iron
X75 - 3” Aluminium
B10 - 3/8” Polypropylene
B50 - 2” Polypropylene
B25 - 1” Standard 2:1
B40 - 1 1/2” Stainless Steel
B25 - 1” Stainless Steel
B50 - 2” Cast Iron
B06 - 1/4" Polypropylene
B25 - 1” Polypropylene
B25 - 1” Hygienic
B15 - 1/2” Stainless Steel
B15 - 1/2” Virgin PTFE
75 to 212F24 to 100C
B25 - 1” Virgin PTFE
Fluid Contact Materials Air Chamber Materials
Sta
inle
ss S
teel
Pol
ishe
d S
tain
less
Alu
min
ium
Cas
t Iro
n
Nic
kel P
late
d A
lum
iniu
m
Pol
ypro
pyle
ne
Sta
inle
ss S
teel
Epo
xy C
oate
d A
lum
iniu
m
Epo
xy C
oate
d S
tain
less
Ste
el
Con
duct
ive
PTF
E
Bun
a-N
EP
DM
(Inc
. Foo
d G
rade
)
Geo
last
Pol
yest
er (H
ytel
)
Neo
pren
e
Con
duct
ive
PTF
E
Virg
in P
TFE
Alu
min
ium
Cas
t Iro
n
PV
DF
Pol
ypro
pyle
ne
Con
duct
ive
Pol
ypro
pyle
ne
BlagdonPortfolio Information
Diaphragm & Ball Valve Options - Uses, Temperature Limits & Specific Gravity
Aggressive chemicals and most solvents. High temperature uses
N/A
Caustic solutions and dilute acids. Excellent abrasion resistance
Aggressive chemicals and solvents but with low abrasion resistance
Excellent abrasion resistance, dirty water, oils and hydrocarbons
High mechanical strength. Suitable with most oils, solvents and hydrocarbons
Excellent abrasion resistance. Widely used in the ceramics industry on dirty water, clays, grout etc
General purpose for use on water, most hydrocarbons and mild chemicals
Caustic solutions and dilute acids. Poor on oils and solvents
General purpose for use on water, most hydrocarbons and mild chemicals
Main Properties and Uses Min Optimum
Operating Temperatures
DiaphragmPump Model/Size/Material
-18F-28C-11F-24C
50 to 140F10 to 60C50 to 140F10 to 60C50 to 140F10 to 60C50 to 130F10 to 54C50 to 130F10 to 54C50 to 130F10 to 54C50 to 212F10 to 100C50 to 140F10 to 60C
-10F-23C-4F
-20C-40F-40C-40F-40C32F0C
-10F-23CN/A N/A
0F-18C
Elastomer
Buna-N
EPDM
Geolast
Neoprene
Polyester
Polyurethane
PTFE
Santoprene
Stainless Steel
Viton
B06 - 1/4" Stainless Steel
B25 - 1” Aluminium
B40 - 1 1/2” Stainless Steel
X75 - 3” Cast Iron
B15 - 1/2” Polypropylene
B50 - 2” PVDF
B25 - 1” Full Flow 2:1
B50 - 2” Stainless Steel
B15 - 1/2” Aluminium
Met
allic
Pum
psN
on-M
etal
lic P
umps
Hygi
enic
Pum
psFD
APu
mps
High
Pres
sure
Pum
ps
PTFE
Pu
mps
B40 - 1 1/2” Aluminium
B50 - 2” Stainless Steel
B06 - 1/4" PVDF
B25 - 1” PVDF
B50 - 2” Hygienic
B25 - 1” Stainless Steel
B25 - 1” Conductive PTFE
B25 - 1” Cast Iron
B50 - 2” Aluminium
X75 - 3” Stainless Steel
B15 - 1/2” PVDF
B15 - 1/2” Hygienic
B50 - 2” Full Flow 2:1
B15 - 1/2” Conductive PTFE
B15 - 1/2” Stainless Steel
B40 - 1 1/2” Cast Iron
X75 - 3” Aluminium
B10 - 3/8” Polypropylene
B50 - 2” Polypropylene
B25 - 1” Standard 2:1
B40 - 1 1/2” Stainless Steel
B25 - 1” Stainless Steel
B50 - 2” Cast Iron
B06 - 1/4" Polypropylene
B25 - 1” Polypropylene
B25 - 1” Hygienic
B15 - 1/2” Stainless Steel
B15 - 1/2” Virgin PTFE
75 to 212F24 to 100C
B25 - 1” Virgin PTFE
Fluid Contact Materials Air Chamber Materials
Sta
inle
ss S
teel
Pol
ishe
d S
tain
less
Alu
min
ium
Cas
t Iro
n
Nic
kel P
late
d A
lum
iniu
m
Pol
ypro
pyle
ne
Sta
inle
ss S
teel
Epo
xy C
oate
d A
lum
iniu
m
Epo
xy C
oate
d S
tain
less
Ste
el
Con
duct
ive
PTF
E
Bun
a-N
EP
DM
(Inc
. Foo
d G
rade
)
Geo
last
Pol
yest
er (H
ytel
)
Neo
pren
e
Con
duct
ive
PTF
E
Virg
in P
TFE
Alu
min
ium
Cas
t Iro
n
PV
DF
Pol
ypro
pyle
ne
Con
duct
ive
Pol
ypro
pyle
ne
Viscosity Guide This table is a guide only – cps = centipoise
SAE
70 O
il17
640
cps
Wat
er1
cps
Tom
ato
Juice
176 c
ps
SAE
30 O
il35
2 cp
s
Gly
cerin
e88
0 cp
s
SAE
50 O
il15
61 c
ps
Glu
e30
00 c
ps
May
onna
ise
5000
cps
Mol
asse
s B
8640
cps
Sour
Cre
am15
200
cps
Ball Valve S.G.
Materials Ball Valve Materials Max. Flow Max. Op PressureAir Inlet Max. SolidSize (mm)Fluid Connections
Max Standard Weighted
B50 - 2” Pumps Maximum 12000
X75 - 3” Pumps Maximum 25000
B06 - 1/4” Pumps
B10 - 3/8” Pumps
Maximum 2000
1 200 500 1000 2000 4000 10000 15000
Maximum 2000
B40 - 1 1/2” Pumps Maximum 12000
B15 - 1/2” Pumps Maximum 5000
B25 - 1” Pumps Maximum 5000
7.80 N/AN/A
1.80 3.2
0.98 N/A
N/A N/A
N/A N/A
N/A N/A
1.23 2.64
1.0 N/A
1.23 2.64
1.23 2.64
356F180C
212F100C
356F180C
158F70C
158F70C
212F100C
212F100C
212F100C
176F80C
34341111
120764014802820114311712012034341111644
20220220212012012076767640404014144
13613648485303201806035012586500136755305301521524848261616889889889530530530320320320180180180606018
2”1 1/2”
1”1/2”2”1”1”
3/8”1/4”1/4”3”3”3”2”2”2”
1 1/2”1 1/2”1 1/2”
1”1”1”
1/2”1/2”1/4”
2” 150 RF2” 150 RF1” 150 RF1” 150 RF
1/2” 150 RF1/2” 150 RF
2”1”1”
3/8”3/8”1/4”1/4”3/4”3/8”3/8”1/4”3/4”3/8”1/4”3/4”3/8”1/4”3/4”3/4”3/8”3/8”1/4”1/4”1/4”1/4”1/4”3/4”3/4”3/4”3/4”3/4”3/4”3/8”3/8”3/8”3/8”3/8”3/8”1/4”1/4”1/4”
7777
8.68.68.68.61616168.68.68.68.68.68888755
8.68.68.68.68.68.68.68.68.68.68.68.68.68.68.6
1001001001001251251251252322322321251251251251251161161161161007272125125125125125125125125125125125125125125125
332266326331032663322222101010666666333222
PTF
E (O
ne P
iece
)
Pol
yure
than
e
San
tropr
ene
PTF
E
Vito
n
Bun
a-N
EP
DM
(Inc
. Foo
d G
rade
)
Neo
pren
e
San
topr
ene
Sta
inle
ss S
teel
PTF
E
Vito
n
UK
GP
M
L/M
in
BS
P(F
)
AN
SI F
lang
e
RJT
(M)
BS
P(F
)
Bar
PS
I
1/2” 150 RF1/2” 150 RF1” 150 RF1” 150 RF
www.blagdonpump.comwww.blagdonpump.com
An ink pumping and mixing plant at Amcor Packaging in Australia using Blagdon 15 moulded pumps.
Fully automated Rexson ink manufacturing plant. Blagdon 25 metallic pumps are used for mixing and recirculation.
Blagdon 75 pump transferring paint from dispenser toblending vessel.
8
The Products – Blagdon Pumps in action
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com
Blagdon 06 moulded pumps being used by DuracoIndustries, Singapore, for chemical injection at a waste treatment plant.
Blagdon 50 pumps feeding a ring main for final blending at a coatings producer.
Part of the filtration process at a major multi-national paint manufacturer where Blagdon 50 pumps are used to supply the fully automated filling line.
This Blagdon 25 metallic pump at Caradon Bathroom is feeding a robotic spray glazing operation.
2 Blagdon pumps at Royal Doulton pottery works. The unit at the rear pumped clay slip for 8 years without change of diaphragm, ball valves or valve seats.
Blagdon 25 moulded Kynar pumps transferring hydroflouric acid.
Blagdon 25 metallic pump at a major chemical plant in Northern England.
9
www.blagdonpump.comwww.blagdonpump.com
TECHNICAL DATA;
NON METALLIC SERIES B06POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 16 ltrs/minMax. working Pressure: 5 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m.Suction Lift (Wet): 4.1 m.Fluid Inlet/Outlet: 1/4" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Polypropylene 1.7 kg.PVDF 1.9 kg.
240 x 180 x 200 mm.
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Example above: B06.04.PP.BB.TTP refers to B06 model, design level 4 with Polypropylene wetted components, Glass filled Polypropylene non-wetted components, with PTFE Diaphragms and Valve Balls and Polypropylene Seats.
MODEL - BO6
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE SEATSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE BALLST : PTFE
®V : VITONS : 316 STAINLESS STEEL
DIAPHRAGMSE : EPDMH : POLYESTER
®R : SANTOPRENET : PTFE
®V : VITONO : ONE PIECE PTFE
NON-WETTED COMPONENTSP : POLYPROPYRENE (Glass filled)
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B06. 04. PP. BB. TTP
Performance curve
ps(14.
)5 i
0 Bar1.
( 9 i2 p )s
02 ar. B
(4 . 3 5 psi)
4.0 Bar5)
8 p i(
s
A0 ar
PS
5. BIR RES URE
( 2.5)
7 psi
10
0 2
0.4
4
0.8
6
1.3
8
1.7
10
2.2
12
2.6
14
3.0
20
20
0
30
40
40
60
80
50
ME
TRE
S H
EA
D
(2 CFM)33.5 M /hr
32 M /hr AIR CONSUMPTION(1.2 CFM)
(3.5 CFM)
36 M /hr
(5.8 CFM)
310 M /hr
(7.6 CFM)
313 M /hr
16
3.5
18
3.9 UK Gall/min
L/min
PS
I HE
AD
FEE
T H
EA
D
FLUID FLOW RATE
33
66
98
131
164
3.0 arB
1269684
154
80.5
138
63
SILENCER
120 (WITH SILENCER FITTED)
17194
107
59 188
BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD
4 MOUNTING HOLES Ø 6.0 IN
POSITION SHOWN
23
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 5 barFlow rates up to 16 litres/minuteBolted construction for safetyLow break out pressure requirementReliable pneumatic air valve system
DESIGN LEVEL
10
Moulded Non Metallic Series
Air Operated Diaphragm Pump RangeB 06
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com
Simple construction, easy to maintainSelf priming, ideal for emptying containersHigh quality investment cast designPressures to 8.6 barFlow rates up to 18 litres/minuteBolted construction for safetyReliable pneumatic air valve systemConstructed from 316L Stainless steel
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES B06STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 18 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m.Suction Lift (Wet): 4.1 m.Fluid Inlet/Outlet: 1/4" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel 3.7 kg.
240 x 180 x 200 mm.
MODEL - B06:Standard X06:ATEX approved
DESIGN LEVELVALVE SEATSS : 316L STAINLESS STEEL
VALVE BALLST : PTFEV : VITONS : 316 STAINLESS STEEL
DIAPHRAGMSE : EPDMH : POLYESTERR : SANTOPRENET : PTFEV : VITONO : ONE PIECE PTFE
WETTED COMPONENTSS : 316L STAINLESS STEEL
NON-WETTED COMPONENTSS : 316L STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B06. 04. SS. BB. TTS
Performance curve
(3.5 CFM)6 3M /hr
30
0
10
20
( psi14.5 )
1.0 Bar
2
0.4
4
0.7 1.0
( 9 i2 s )p Ba.02
r
4( si)3.5 p.0 B r
3 a
6
1.4
8
1.8
i ps )(87
40
50
60
70
90
(2 CFM)
33.5 M /hr
( )ps58 i
(1i
01)
ps
0 ar7B.
5 psi)
(12
2 AIR CONSUMPTION3M /hr(1.2 CFM)
L/min
4.0
14
2.5
10
2.2
12
2.9
16
3.3
18
3.7
(7.6 CFM)13 3M /hr
Gall/min
(5.8 CFM)10 3M /hr
PS
I HE
AD
0
40
20
60
80
100
120
33
0
66
99
131
197
164
230
262
FLUID FLOW RATE
ME
TRE
S H
EA
D
FEE
T H
EA
D
i7 5 p
( 2. s )4. ar B0
5 0 B. ar
6. a0 B r
80
B6 ar I
PE
URE
8.
A RR
S
S
SILENCER
112
98
123 33
15.5
122 148.5
189 (MANIFOLDS IN–LINE)
94.5
171110
76.5 AIR INLET
4 MOUNTING HOLESØ 6.5
AIR INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
FLUID INLET1/4” BSP(F)
TECHNICAL DATA;
NON METALLIC SERIES B06POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 16 ltrs/minMax. working Pressure: 5 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 1.5 m.Suction Lift (Wet): 4.1 m.Fluid Inlet/Outlet: 1/4" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Polypropylene 1.7 kg.PVDF 1.9 kg.
240 x 180 x 200 mm.
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Example above: B06.04.PP.BB.TTP refers to B06 model, design level 4 with Polypropylene wetted components, Glass filled Polypropylene non-wetted components, with PTFE Diaphragms and Valve Balls and Polypropylene Seats.
MODEL - BO6
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE SEATSP : POLYPROPYLENEK : KYNAR (PVDF)
VALVE BALLST : PTFE
®V : VITONS : 316 STAINLESS STEEL
DIAPHRAGMSE : EPDMH : POLYESTER
®R : SANTOPRENET : PTFE
®V : VITONO : ONE PIECE PTFE
NON-WETTED COMPONENTSP : POLYPROPYRENE (Glass filled)
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B06. 04. PP. BB. TTP
Performance curve
ps(14.
)5 i
0 Bar1.
( 9 i2 p )s
02 ar. B
(4 . 3 5 psi)
4.0 Bar5)
8 p i(
s
A0 ar
PS
5. BIR RES URE
( 2.5)
7 psi
10
0 2
0.4
4
0.8
6
1.3
8
1.7
10
2.2
12
2.6
14
3.0
20
20
0
30
40
40
60
80
50
ME
TRE
S H
EA
D
(2 CFM)33.5 M /hr
32 M /hr AIR CONSUMPTION(1.2 CFM)
(3.5 CFM)
36 M /hr
(5.8 CFM)
310 M /hr
(7.6 CFM)
313 M /hr
16
3.5
18
3.9 UK Gall/min
L/min
PS
I HE
AD
FEE
T H
EA
D
FLUID FLOW RATE
33
66
98
131
164
3.0 arB
1269684
154
80.5
138
63
SILENCER
120 (WITH SILENCER FITTED)
17194
107
59 188
BLAGDON LABEL INCLUDING PUMP MODEL & SERIAL NO. FASTENEDTO MANIFOLD
4 MOUNTING HOLES Ø 6.0 IN
POSITION SHOWN
23
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 5 barFlow rates up to 16 litres/minuteBolted construction for safetyLow break out pressure requirementReliable pneumatic air valve system
DESIGN LEVEL
11
Metallic Series
Air Operated Diaphragm Pump Range B 06
www.blagdonpump.comwww.blagdonpump.com12
Moulded Non Metallic Series
Air Operated Diaphragm Pump RangeB 15
Simple construction, easy to maintainSelf priming, ideal for emptying containersStrong, robust designPressures to 8 barFlow rates up to 48 litres/minuteFlanged or screwed end connectionsPneumatic air valve, reliable and easy
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLICSERIES B15 POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 48 Itrs/minMax. Working Pressure: 8 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1/2" ANSI #150 RF FlangedInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Polypropylene/Aluminium 5.3kg.PVDF/Aluminium 7kg.Polypropylene/Stainless 12kg.Steel PVDF/Stainless Steel 13.5kg.
320 x 200 x 340 mm.
MODEL - B15 : Standard X15 : ATEX approved
DESIGN LEVEL
VALVE SEATSB : BUNA-N K : KYNAR (PVDF)E : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE
VALVE BALLSB : BUNA-NE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
T : PTFE
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)G : CONDUCTIVE POLYPROPYLENE
NON-WETTED COMPONENTST : EPOXY COATED ALUMINIUMW: EPOXY COATED STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B15. 01. PT. BB. TTP -LF
Performance curve
B8 ar(11 p i6
s )B7 ar(
ps )
101.5 i6 B r a(87 s ) p i5 Bar7
p( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 si.5 p )2 Bar2( 9 psi)
1. Bar R R S5 AI P E SURE
21.7psi(
)
ME
TRE
S H
EA
D
30
0
10
20
2 4
FLUID FLOWRATE
6 8
60
40
50
70
80
(5.3 CFM)9 M /hr3
(6.5 CFM)11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)30 M /hr3
FEE
T H
EA
D
99
12 - UK GPM10
0
33
66
197
131
164
230
266
PS
I HE
AD
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 40 50 L/MIN
287 IN–LINE MANIFOLDS
208 304
51
133
260210
77
143.5
9
2085
170
20
84
MOUNTINGSLOTS
259
155 AIR INLET
AIR EXHAUST1/4” BSP
SUCTION INLET1/2” ANSI
150 FLANGE
DISCHARGEOUTLET
1/2” ANSI150 FLANGE
LUBE FREE
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 13
Metallic Series
Air Operated Diaphragm Pump Range B 15
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 60 litres/minuteBolted construction for greater integrityReliable pneumatic air valve designPortable
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES B15ALUMINIUM
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 60 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1/2" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Aluminium 5.9 kg.
320 x 200 x 340 mm.
TYPICAL CODE = B15. 01. AA. BB. TTS - LF
Performance curve
MODEL - B15 : Standard X15 :ATEX approved
DESIGN LEVELVALVE SEATSA : ALUMINIUMB : BUNA-NE : EPDMN : NEOPRENEV : VITONS : 316 STAINLESS STEEL
VALVE BALLSB : BUNA-N V : VITONE : EPDM T : PTFEN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSA : ALUMINUM
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
ME
TRE
S H
EA
D
30
20
20
40
10
10
2
6
20
4
30
8
85
80
70
50
4060
80
100
120
60
FEE
T H
EA
D
- UK GPM10 12 14
L/MIN
50
100
250
150
200
PS
I HE
AD
0
277
40 50 60 70 -
100 83
25
245.5
127.583 44
203.5
89
120233160
127.5
124.5AIR INLET
FLUID DISCHARGE1/2” BSP
AIR INLET1/4” BSP
AIR EXHAUST1/4” BSP
FLUID SUCTION1/2” BSP
Ø 7mmMOUNTING HOLES
8.0 Bar AIR PRESSURE
(116 psi)
7 0r
. Ba( 0 . 1 1 5 psi)
6.0 Bar(87 psi)
0 B5. ar72.)
( 5 psi4 0 B. ar58 i)
( ps
3.0 Bar43. p )( 5 si
2.0 Bar29.)
( 0 psi1.5 Bar
7(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
LUBE FREE
www.blagdonpump.comwww.blagdonpump.com14
Metallic Series
Air Operated Diaphragm Pump RangeB 15
Simple construction, easy to maintainSelf priming, ideal for emptyingPressures to 8.6 barFlow rates up to 60 litres/minuteBolted construction for greater integrity316L Stainless steel
TECHNICAL DATA;
METALLIC SERIES B15STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 60 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1/2" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 9.7 kg.Stainless Steel 15 kg.
320 x 200 x 340 mm.
TYPICAL CODE = B15. 01. SA. BB. TTS - LF
Performance curve
MODEL - B15 : Standard X15 :ATEX approved
DESIGN LEVEL
VALVE SEATSS : 316 STAINLESS STEEL
VALVE BALLSB : BUNA-NE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
T : PTFE
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
261
188
94
25
201
288 IN–LINE MANIFOLD OPTION
241
126 AIR INLET
AIR INLET1/4” BSP
156
75FLUID DISCHARGE1/2” BSP
AIR EXHAUST1/4” BSP
FLUIDSUCTION1/2” BSP
172
Ø 7MOUNTING
HOLESNote: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
FLUID FLOW RATE
ME
TRE
S H
EA
D
30
20
20
40
10
10
2
6
20
4
30
8
85
80
70
50
4060
80
100
120
60
FEE
T H
EA
D
- UK GPM10 12 14
L/MIN
50
100
250
150
200
PS
I HE
AD
0
277
40 50 60 70 -
8.0 Bar AIR PRESSURE
(116 psi)
7 0r
. Ba( 0 . 1 1 5 psi)
6.0 Bar(87 psi)
0 B5. ar72.)
( 5 psi4 0 B. ar58 i)
( ps
3.0 Bar43. p )( 5 si
2.0 Bar29.)
( 0 psi1.5 Bar
7(21. psi)
310 M /hr(5.8 CFM)
335 M /hr(20.6 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
LUBE FREE
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 15
PTFE Non Metallic Series
Air Operated Diaphragm Pump Range B 15
Simple construction, easy to maintainAvailable in virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved - intrinsically safeReliable, proven pneumatic air valveStrong, robust design
MODEL - B15 : StandardX15 : ATEX approved
DESIGN LEVELVALVE SEATST : PTFE
VALVE BALLST : PTFE
DIAPHRAGMST : PTFEX : PTFE/VITON (HIGHT TEMP.)
WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE
NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)S : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
B7 ar(ps )
101.5 i6 B r a(87 s ) p i5 Bar7
p( 2.5 si)4 Bar( 8 p5 si)3 Bar(43 si.5 p )2 Bar2( 9 psi)
1. Bar R R S5 AI P E SURE
21.7psi(
)
ME
TRE
S H
EA
D
30
0
10
20
2 4
FLUID FLOWRATE
6 8
60
40
50
70
80
(5.3 CFM)9 M /hr3
(6.5 CFM)11 M /hr3 21 M /hr3
(12.4 CFM) (17.6 CFM)30 M /hr3
FEE
T H
EA
D
99
12 - UK GPM10
0
33
66
197
131
164
230
266
PS
I HE
AD
42.6
28.4
14.2
0
113.6
99.4
71.0
56.8
85.2
10 20 30 40 50 L/MIN
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitter.
Performance curve
TECHNICAL DATA;
NON METALLIC SERIES B15CONDUCTIVE / VIRGIN PTFE
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 48 Itrs/minMax. Working Pressure: 7 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1/2" ANSI #150 RF FlangedInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Conductive PTFE 16 kg.Virgin PTFE 16 kg.
335 x 215 x 335 mm.
TYPICAL CODE = B15. 00. TS. BB.TTT - LF
Ø 40 FASTENED THRO’ WITH M6
SOCKET CAP SCREWS
MOUNTING PADS 158
Ø93
31.5
311.5265
273.5
212
53
54108
150
160 BODY DIA.
AIR INLET1/4” BSP
88
159AIR
INLET
GROUNDING LEAD - ATTACHED TO OUTER COVER.(ATEX CERTIFIED MODELS ONLY)
169
285AIR EXHAUST1/4” BSP
90.5
LUBE FREE
www.blagdonpump.comwww.blagdonpump.com16
Hygienic Series
Air Operated Diaphragm Pump RangeB 15
Range of DIN/RJT and Ferrule connectionsSelf priming, for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCertified CIP cleanableEU Design approval
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B15STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 75 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 2 mm.Air Inlet: 1/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1" RJT (Standard)Installation: Wall or surface mountedAccessories Included: Exhaust air silencer
Stainless Steel/Aluminium 10.5 kg.Stainless Steel 15.8 kg.
320 x 210 x 390 mm.
TYPICAL CODE = B15.01. ZF. BB. EEE - LF
Performance curve
MODEL - B15 StandardX15: ATEX approved
DESIGN LEVEL
VALVE SEATSE : FOOD GRADE EPDM
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMT : PTFEO : ONE PIECE PTFE
WETTED COMPONENTSZ : 316 STAINLESS STEEL
(POLISHED)
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
50
100
150
20
40
60
80
100
120
PS
I HE
AD
FEE
T H
EA
D
200
250
280
ME
TRE
S H
EA
D
2
10
20
30
84 6
10 12 1814 16 - UK GAL/MIN
40
50
60
70
80
85
10 20 30 40 50 60 70 80 - L/MIN
112 130
33.5
296 160
83
288 342
132
4MOUNTINGHOLES Ø9
SUCTION INLET1” MALE RJT
170AIR INLET
AIR INLET1/4” BSP(F)
SILENCER1/4” BSP
DISCHARGE OUTLET1” MALE RJT
330 M /hr(17.6 CFM)
310 M /hr(5.8 CFM)
320 M /hr(11.7 CFM)
315 M /hr AIR CONSUMPTION(8.8 CFM)
a R PRES
UR
8 Br AI
SE
(1 6 ps )1
i7.0 Bar(101.5 p ) si6.0 Bar(87 psi)
a5.0 B r
)(72.5 psi
4 0 B r.
a(5 psi8
)
r3.0 Ba4( 3.5 psi)
0r
2. Ba2 0 i( 9. ps )
1.5 Bar21.7 ps
(i)
LUBE FREE
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 17
Moulded Non Metallic Series
Air Operated Diaphragm Pump Range B 25
Materials options suitable for a wide range of chemicalsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8 barFlow rates up to 152 litres/minuteFlanged or screwed end connectionsReliable, pneumatic air valveStrong, robust design, bolted construction
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLIC SERIES B25POLYPROPYLENE AND PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 152 Itrs/minMax. Working Pressure: 8 barMax. Solid Particle Size: 3 mm.Air Inlet: 3/8" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 1" ANSI # 150 Flanged RFInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Polypropylene/Aluminium 13.5 kg.PVDF/Aluminium 18 kg.Polypropylene/Stainless Steel 18 kg.PVDF/Stainless Steel 20 kg.
440 x 260 x 470 mm.
TYPICAL CODE = B25.05. PT. BB. EEP - LF
Performance curve
MODEL - B25 : Standard X25 : ATEX approved
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)G : CONDUCTIVE POLYPROPYLENE
VALVE SEATSB : BUNA-N N : NEOPRENEE : EPDMK : KYNAR (PVDF)P : POLYPROPYLENE
VALVE BALLSBE : EPDM V : VITONN : NEOPRENES : STAINLESS STEEL
: BUNA-N T : PTFE
DIAPHRAGMSBE : EPDM V : VITONH : POLYESTER (HYTREL)N : NEOPRENEP : POLYURETHENER : SANTOPRENEO : ONE-PIECE PTFE
: BUNA-N T : PTFE
NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: STAINLESS STEEL/EPOXY PAINTED
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
ME
TRE
S H
EA
D
99 FEE
T H
EA
D
3042.6
0
14.2
0
28.4
0
10
20
FLUID FLOWRATE
5 10 15 - UK GPM20
0
33
66
60 85.2
PS
I HE
AD
56.8
71.0
40
50
99.4
113.6
70
80
197
131
164
230
262
20 40 60 80 100 120 140 160 - L/MIN
25 30 35
MOUNTINGSLOTS
64
317 CRS
108
DISCHARGE OUTLET1” ANSI 150 FLANGE
AIR INLET3/8” BSP(F)
AIR EXHAUST1/2” BSP(F)
SUCTIONINLET1” ANSI 150 FLANGE
230
115
20 20
205
9222
394432
105
435
8 Bar1 (1 6 psi)
7 Bar(1 .5 ps )01 i
75 M /hr(44 CFM)
358 M /hr(34 CFM)
339 M /hr(23 CFM)
319 M /hr(11 CFM)
3
12 (7 CFM)
3M /hr
6 Bar8 )( 7 psi
5 Bar(72. ps5 i)4 Bar
)(58 psi3 Bar(4 .5 p )3 si2 Bar (2 )9 psi1 r R PRESSU E
Ba AI R(14. s )5 p i
DESIGN LEVEL
LUBE FREE
www.blagdonpump.comwww.blagdonpump.com18
Metallic Series
Air Operated Diaphragm Pump RangeB 25
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Material options suitable for a wide range of applicationsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 180 litres/minuteBolted construction for greater integrityWeighted Valve Balls for high S.G. and viscous fluidsReliable, pneumatic air valve
TECHNICAL DATA;
METALLIC SERIES B2504ALUMINIUM, STAINLESS STEEL, CAST IRON
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 180 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 3 mm.Air Inlet: 3/8” BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 1" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Aluminium 16 kg.Cast Iron/Aluminium 25 kg.Stainless Steel/Aluminium 25 kg.
400 x 300 x 470 mm.
TYPICAL CODE = B25. 05. AA. BB. BBS - LF
Performance curve
MODEL - B2505 :StandardX2505 :ATEX approved
WETTED COMPONENTSA : ALUMINIUMS : 316L STAINLESS STEELC : CAST IRON
VALVE SEATSS : 316L STAINLESS STEEL
VALVE BALLSTN : NEOPRENE V : VITONB : BUNA-N S : STAINLESS STEELD : DELRIN
: PTFE E : EPDM
DIAPHRAGMSNP : POLYESTER B : BUNA-NR : SANTROPRENE T : PTFEP : POLYURETHANE E : EPDMO : ONE-PIECE PTFE
: NEOPRENE V : VITON
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
30 FEE
T H
EA
D
ME
TRE
S H
EA
D
0 0
10
20
FLUID FLOWRATE
0
PS
I HE
AD
60
40
50
70
80
90
42.6
28.4
14.2
113.6
99.4
71.0
56.8
85.2
PS
I HE
AD
99
33
66
197
131
164
230
262
127.8 295
200 40 60 100 140 160 200 - L/MIN18012080
5 10 15 20 25 - UK GPM4030 35
7 Bar10 .5 s )( 1 p i6 Bar(87 psi)
4 Barp(58 si)
3 B ra(4 . psi)
3 5
2 Bar(29 psi)1 AI PRESSURE
Bar R 14.5 )( psi
5 Bar72.5 psi)
(
8 BAR(116 si)p
8.6 Bar
(125 psi)
19 M /hr(11 CFM)
3 39 (23 CFM)
3M /hr 58 (34 CFM)
3M /hr 75 (44 CFM)
3M /hr 100 (59 CFM)
3M /hr
12 (7 CFM)
3M /hr
358210
105
226
AIR INLET3/8” BSPPARALLEL
FLUIDOUTLET1” BSPPARALLEL
EXHAUSTSILENCER1/2” BSP
192
50
215
AIR
INLE
T
215
AIR
EX
HA
US
T 329
CR
S
405
FLUIDINLET1” BSPPARALLEL
S : 316L STAINLESS STEEL
LUBE FREE
MODEL - B25 : SERIES 00
WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE
VALVE SEATST : PTFE
VALVE BALLST : PTFE
DIAPHRAGMST : PTFEX : PTFE/VITON (HIGH TEMP.)
NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B25.00.T5.BB.TTT-LF
Simple construction, easy to maintainAvailable in Virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved – intrinsically safeReliable, proven pneumatic air valveStrong, robust design
60 281 188
63
298
137 1” BSP PARALLELFLUID OUTLET
1” BSP PARALLELFLUID INLET
AIR EXHAUST1/2” BSP
201386
411
230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)
212AIR INLET
AIR INLET3/8” BSP
391
TECHNICAL DATA;
NON METALLIC SERIES B25 VIRGIN PTFE, CONDUCTIVE PTFE
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 ltrs/minMax. Working Pressure: 7 BarMax. Solid Particle Size: 3 mm.Air Inlet: 3/8" BSP (F)
3/8" NPT (F)OTemperature Limits: 100 C
Suction Lift (Dry): 6.1 mSuction Lift (Wet): 7.6 m Inlet/Outlet: 1" BSP/ANSI
150 FlangeInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Virgin PTFE: 37 kg.Conductive PTFE: 40 kg.
500 x 300 x 450 mm.
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Performance curve
ME
TRE
S H
EA
D
FEE
T H
EA
D
7.0 Bar1 p
(10 .5 si)
6.0 a B r(8 p i)7 s
5.0 rBa(72.5 psi)
. Bar4 0(5 p i)8 s
3 Bar.0(4 .5 p i3 s )
2.0 Bar(2 .0 psi)9.1 5 Bar
1(2 .7 psi)
40 M 3/hr
30 M3/hr AIR CONSUMPTION
20 M3/hr
(23.5 CFM)
(17.6 CFM)
(11.7 CFM)
(38 CFM)65 /hr3M
PS
I HE
AD
PS
I HE
AD
FLUID FLOWRATE
50
100
150
200
250
279
20
40
60
80
100
120
10
20
30
40
50
60
70
80
85
20 40 60 80 100 120 140 160 L/MIN
4 168 12 20 24 - UK GPM28 32
LUBE FREE
X25 : ATEX approved
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 19
PTFE – Non Metallic Series
Air Operated Diaphragm Pump Range B 25
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Material options suitable for a wide range of applicationsSimple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 180 litres/minuteBolted construction for greater integrityWeighted Valve Balls for high S.G. and viscous fluidsReliable, pneumatic air valve
TECHNICAL DATA;
METALLIC SERIES B2504ALUMINIUM, STAINLESS STEEL, CAST IRON
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 180 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 3 mm.Air Inlet: 3/8” BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 1" BSP(F)Installation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Aluminium 16 kg.Cast Iron/Aluminium 25 kg.Stainless Steel/Aluminium 25 kg.
400 x 300 x 470 mm.
TYPICAL CODE = B25. 05. AA. BB. BBS - LF
Performance curve
MODEL - B2505 :StandardX2505 :ATEX approved
WETTED COMPONENTSA : ALUMINIUMS : 316L STAINLESS STEELC : CAST IRON
VALVE SEATSS : 316L STAINLESS STEEL
VALVE BALLSTN : NEOPRENE V : VITONB : BUNA-N S : STAINLESS STEELD : DELRIN
: PTFE E : EPDM
DIAPHRAGMSNP : POLYESTER B : BUNA-NR : SANTROPRENE T : PTFEP : POLYURETHANE E : EPDMO : ONE-PIECE PTFE
: NEOPRENE V : VITON
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
30 FEE
T H
EA
D
ME
TRE
S H
EA
D
0 0
10
20
FLUID FLOWRATE
0
PS
I HE
AD
60
40
50
70
80
90
42.6
28.4
14.2
113.6
99.4
71.0
56.8
85.2
PS
I HE
AD
99
33
66
197
131
164
230
262
127.8 295
200 40 60 100 140 160 200 - L/MIN18012080
5 10 15 20 25 - UK GPM4030 35
7 Bar10 .5 s )( 1 p i6 Bar(87 psi)
4 Barp(58 si)
3 B ra(4 . psi)
3 5
2 Bar(29 psi)1 AI PRESSURE
Bar R 14.5 )( psi
5 Bar72.5 psi)
(
8 BAR(116 si)p
8.6 Bar
(125 psi)
19 M /hr(11 CFM)
3 39 (23 CFM)
3M /hr 58 (34 CFM)
3M /hr 75 (44 CFM)
3M /hr 100 (59 CFM)
3M /hr
12 (7 CFM)
3M /hr
358210
105
226
AIR INLET3/8” BSPPARALLEL
FLUIDOUTLET1” BSPPARALLEL
EXHAUSTSILENCER1/2” BSP
192
50
215
AIR
INLE
T
215
AIR
EX
HA
US
T 329
CR
S
405
FLUIDINLET1” BSPPARALLEL
S : 316L STAINLESS STEEL
LUBE FREE
MODEL - B25 : SERIES 00
WETTED COMPONENTST : PTFE4 : CONDUCTIVE PTFE
VALVE SEATST : PTFE
VALVE BALLST : PTFE
DIAPHRAGMST : PTFEX : PTFE/VITON (HIGH TEMP.)
NON-WETTED COMPONENTS4 : CONDUCTIVE PTFE5 : POLYETHYLENE (HDPE)
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
TYPICAL CODE = B25.00.T5.BB.TTT-LF
Simple construction, easy to maintainAvailable in Virgin and conductive PTFEChemically inertFlanged end connectionsAtex approved – intrinsically safeReliable, proven pneumatic air valveStrong, robust design
60 281 188
63
298
137 1” BSP PARALLELFLUID OUTLET
1” BSP PARALLELFLUID INLET
AIR EXHAUST1/2” BSP
201386
411
230GROUNDING LEADATTACHED TO BASE LEG.(ATEX CERTIFIED MODELS ONLY)
212AIR INLET
AIR INLET3/8” BSP
391
TECHNICAL DATA;
NON METALLIC SERIES B25 VIRGIN PTFE, CONDUCTIVE PTFE
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 ltrs/minMax. Working Pressure: 7 BarMax. Solid Particle Size: 3 mm.Air Inlet: 3/8" BSP (F)
3/8" NPT (F)OTemperature Limits: 100 C
Suction Lift (Dry): 6.1 mSuction Lift (Wet): 7.6 m Inlet/Outlet: 1" BSP/ANSI
150 FlangeInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Virgin PTFE: 37 kg.Conductive PTFE: 40 kg.
500 x 300 x 450 mm.
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
Performance curve
ME
TRE
S H
EA
D
FEE
T H
EA
D
7.0 Bar1 p
(10 .5 si)
6.0 a B r(8 p i)7 s
5.0 rBa(72.5 psi)
. Bar4 0(5 p i)8 s
3 Bar.0(4 .5 p i3 s )
2.0 Bar(2 .0 psi)9.1 5 Bar
1(2 .7 psi)
40 M 3/hr
30 M3/hr AIR CONSUMPTION
20 M3/hr
(23.5 CFM)
(17.6 CFM)
(11.7 CFM)
(38 CFM)65 /hr3M
PS
I HE
AD
PS
I HE
AD
FLUID FLOWRATE
50
100
150
200
250
279
20
40
60
80
100
120
10
20
30
40
50
60
70
80
85
20 40 60 80 100 120 140 160 L/MIN
4 168 12 20 24 - UK GPM28 32
LUBE FREE
X25 : ATEX approved
www.blagdonpump.comwww.blagdonpump.com
Full Flow High Pressure
20
Air Operated Diaphragm Pump RangeB 25
Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 125 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES - FULL FLOW 2:1 B25
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 125 ltrs/minMax. Working Pressure: 16 Bar (232 psi)
(8 Bar Max. Air Inlet)Max. Solid Particle Size: 3 mm.Air Inlet: 3/8" BSP (F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6 m. (20')Suction Lift (Wet): 7.6 m. (25')Fluid Inlet/Outlet: 1" BSP (F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 33 kg.Aluminium 24.5 kg.
480 x 320 x 480 mm.
TYPICAL CODE = B25. 05. AA. W3. NNS
Performance curve
MODEL - B25 : Standard X25 : ATEX approved
DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL
VALVE BALLST : PTFEN : NEOPRENEB : BUNA-NE : EPDMS : STAINLESS STEELV : VITON
DIAPHRAGMST : PTFEN : NEOPRENEB : BUNA-NR : SANTOPRENEE : EPDMH : POLYESTER (HYTREL)O : ONE PIECE PTFEP : POLYURETHANEV : VITON
WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL.
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
MODEL DESIGNATION
100
FLUID FLOW RATE
ME
TRE
S H
EA
D
60
40
20
40
80
20
4 8
40
60
12
80
16
180
160
140
120
100
80PS
I HE
AD
120
160
200
240
200
100
- UK GPM2820
120
24
140
32
- L/MIN
600
500
400
300
FEE
T H
EA
D
0
254
405
464
438
72 105
250
50
330
280
MOUNTING HOLESØ 8.5 THRO’
DISCHARGE OUTLET1” BSP (F)
3/8” BSP (F)AIR INLET
AIR EXHAUST1/2” BSP(F)
202AIR INLET
SUCTION INLET1” BSP (F)
370 M /hr(41.2 CFM)
314 M /hr(8.2 CFM)
358 M /hr(34.2 CFM)
350 M /hr(29.4 CFM)
325 M /hr(14.7 CFM)
340 M /hr AIR CONSUMPTION(23.5 CFM)
1.5 Bar(21.7 psi)
2 .0 Bar0(29. psi)
. a3 0 B r3 5 ps
(4 . i)
.0 Ba4
r(58 psi)
5 Ba.0 r(7 .5 p i2 s )
6.0 Bar(87 p i) s
7.0 Bar(10 . si)1 5 p
8 a A R
RESRE
.0 Br I P
SU
6i)
(11 ps
Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316L Stainless steel
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B25STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 5 mm.Air Inlet: 3/8" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1" RJTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel 21.5 kg.
450 x 280 x 500 mm.
TYPICAL CODE = B25. ZF. BB. EEE - LF
Performance curve
MODEL - B25X25: ATEX approved
WETTED COMPONENTSZ : 316 STAINLESS STEEL (ELECTRO POLISHED) VALVE SEATS
E : FOOD GRADE EPDMS : 316 STAINLESS STEEL
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMT : PTFE
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
10
20
30
40
50
60
70
80
ME
TRE
S H
EA
D
20
40
60
80
100
120
PS
I HE
AD
FEE
T H
EA
D
85
50
100
150
200
250
279
20 40 60 80 100 120 140 160 L/MIN
4 168 12 20 24 - UK GPM28 32
160 126.5
SUNCTIONINLET1” MALE RJT
DISCHARGE OUTLET1” MALE RJT
AIR INLET3/8” BSP(F)
SILENCER1/2” BSP
223AIR INLET
160220
55
432
226413
108187
356
4 MOUNTING HOLES Ø 9
365 M /hr(38 CFM)
3.0 arB( 3 5 psi)4 .
4.0 arB58 p i)( s
5.0 Bar(72.5 psi)
B6.0 ar(8 s7 p i)
7 0 Ba. r0 5 p i)(1 1. s
320 M /hr(11.7 CFM)
340 M /hr(23.5 CFM)
330 M /hr AIR CONSUMPTION(17.6 CFM)
Bar IS U
8.0 A R PRE S RE
16 i)(1
ps
.0 Bar2(29.0 psi)5 r1. Ba
.(21 7 psi)
LUBE FREE
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 21
Hygienic Series
Air Operated Diaphragm Pump Range B 25
Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 125 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES - FULL FLOW 2:1 B25
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 125 ltrs/minMax. Working Pressure: 16 Bar (232 psi)
(8 Bar Max. Air Inlet)Max. Solid Particle Size: 3 mm.Air Inlet: 3/8" BSP (F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6 m. (20')Suction Lift (Wet): 7.6 m. (25')Fluid Inlet/Outlet: 1" BSP (F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 33 kg.Aluminium 24.5 kg.
480 x 320 x 480 mm.
TYPICAL CODE = B25. 05. AA. W3. NNS
Performance curve
MODEL - B25 : Standard X25 : ATEX approved
DESIGN LEVELVALVE SEATSS : 316 STAINLESS STEEL
VALVE BALLST : PTFEN : NEOPRENEB : BUNA-NE : EPDMS : STAINLESS STEELV : VITON
DIAPHRAGMST : PTFEN : NEOPRENEB : BUNA-NR : SANTOPRENEE : EPDMH : POLYESTER (HYTREL)O : ONE PIECE PTFEP : POLYURETHANEV : VITON
WETTED COMPONENTSA : ALUMINIUMS : 316 STAINLESS STEEL.
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
MODEL DESIGNATION
100
FLUID FLOW RATE
ME
TRE
S H
EA
D
60
40
20
40
80
20
4 8
40
60
12
80
16
180
160
140
120
100
80PS
I HE
AD
120
160
200
240
200
100
- UK GPM2820
120
24
140
32
- L/MIN
600
500
400
300
FEE
T H
EA
D
0
254
405
464
438
72 105
250
50
330
280
MOUNTING HOLESØ 8.5 THRO’
DISCHARGE OUTLET1” BSP (F)
3/8” BSP (F)AIR INLET
AIR EXHAUST1/2” BSP(F)
202AIR INLET
SUCTION INLET1” BSP (F)
370 M /hr(41.2 CFM)
314 M /hr(8.2 CFM)
358 M /hr(34.2 CFM)
350 M /hr(29.4 CFM)
325 M /hr(14.7 CFM)
340 M /hr AIR CONSUMPTION(23.5 CFM)
1.5 Bar(21.7 psi)
2 .0 Bar0(29. psi)
. a3 0 B r3 5 ps
(4 . i)
.0 Ba4
r(58 psi)
5 Ba.0 r(7 .5 p i2 s )
6.0 Bar(87 p i) s
7.0 Bar(10 . si)1 5 p
8 a A R
RESRE
.0 Br I P
SU
6i)
(11 ps
Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316L Stainless steel
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B25STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 136 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 5 mm.Air Inlet: 3/8" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.6 m.Suction Lift (Wet): 6.1 m.Fluid Inlet/Outlet: 1" RJTInstallation: Wall or surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel 21.5 kg.
450 x 280 x 500 mm.
TYPICAL CODE = B25. ZF. BB. EEE - LF
Performance curve
MODEL - B25X25: ATEX approved
WETTED COMPONENTSZ : 316 STAINLESS STEEL (ELECTRO POLISHED) VALVE SEATS
E : FOOD GRADE EPDMS : 316 STAINLESS STEEL
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMT : PTFE
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
10
20
30
40
50
60
70
80
ME
TRE
S H
EA
D
20
40
60
80
100
120
PS
I HE
AD
FEE
T H
EA
D
85
50
100
150
200
250
279
20 40 60 80 100 120 140 160 L/MIN
4 168 12 20 24 - UK GPM28 32
160 126.5
SUNCTIONINLET1” MALE RJT
DISCHARGE OUTLET1” MALE RJT
AIR INLET3/8” BSP(F)
SILENCER1/2” BSP
223AIR INLET
160220
55
432
226413
108187
356
4 MOUNTING HOLES Ø 9
365 M /hr(38 CFM)
3.0 arB( 3 5 psi)4 .
4.0 arB58 p i)( s
5.0 Bar(72.5 psi)
B6.0 ar(8 s7 p i)
7 0 Ba. r0 5 p i)(1 1. s
320 M /hr(11.7 CFM)
340 M /hr(23.5 CFM)
330 M /hr AIR CONSUMPTION(17.6 CFM)
Bar IS U
8.0 A R PRE S RE
16 i)(1
ps
.0 Bar2(29.0 psi)5 r1. Ba
.(21 7 psi)
LUBE FREE
www.blagdonpump.comwww.blagdonpump.com
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 320 litres/minuteBolted construction for greater integrityReliable, proven pneumatic air valve system
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
The above drawing shows Aluminium and Cast Iron only.
TECHNICAL DATA;
METALLIC SERIES B40ALUMINIUM, CAST IRON & STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 320 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/8" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 1 1/2" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Aluminium 22 kg.Stainless Steel/Aluminium 36 kg.Stainless Steel 46 kg.Stainless Steel/Cast Iron 46 kg.Cast Iron/Aluminium 51.4 kg.Cast Iron 61 kg.
500 x 350 x 600 mm.
TYPICAL CODE = B40. 05. AA. BB. BBS - LF
Performance curve
MODEL - B40 : Standard X40 : ATEX approved
DESIGN LEVEL
VALVE SEATSB : BUNA-NE : EPDM N : NEOPRENEV : VITONS : 316 STAINLESS STEEL
A : ALUMINIUM
VALVE BALLSB : BUNA-NE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
T : PTFE
DIAPHRAGMSB : BUNA-N P : POLYURETHANEE : EPDM R : SANTOPRENEH : POLYESTER T : PTFEN : NEOPRENE V : VITONO : ONE PIECE PTFE
WETTED COMPONENTSA : ALUMINIUMC : CAST IRON*S : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
FLUID FLOW RATE
10
20
30
40
50
60
70
80
ME
TRE
S H
EA
D
50
100
150
20
40
60
80
100
120
PS
I HE
AD
FEE
T H
EA
D
200
250
85 279
- L/MIN50 100 150 200 250 300 3500
0 10 3020 5040 8060 - UK GPM70
204178
FLUID SUCTIONINLET 1”1/2 BSP
AIR INLET3/8” BSP
FLUID DISCHARGEOUTLET 1”1/2 BSP
SILENCER1/2” BSP(M)
271AIR INLET
270
441243
117.5
549
486 IN-LINE MANIFOLD
470
4856
251
13 SLOT
360 M /hr AIR CONSUMPTION(35.3 CFM)
320 M /hr(11.7 CFM)
390 M /hr(53 CFM)
3100 M /hr(58.8 CFM)
3115 M /hr(67.5 CFM)
380 M /hr(47 CFM)
RR
S
E
8.0 Bar AI PE
SUR
( 11 6 psi)7.0 Ba r(1
.5si)
01 p
6.0 Bar(87 psi)
5.0 Bar72.i
( 5 ps )4.0 Bar(58 psi)
3.0 Bar5 s
(43. p i)
2 0. Bar29 psi)
( .0B1.5 ar21. ( 7 psi)
340 M /hr(23.5 CFM)
LUBE FREE
22
Metallic Series
Air Operated Diaphragm Pump RangeB 40
*Pumps with cast iron wetted components are supplied at design level 01.
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com
Simple construction, easy to maintainCapable of handling high S.G and viscous fluidsPressures to 8.6 barFlow rates up to 530 litres/minuteFlanged end connectionsReliable, proven pneumatic air valve
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
MOULDED NON METALLIC SERIES B50POLYPROPYLENE & PVDF
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 ltrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" ANSI #150 RF FlangedInstallation: Surface mountedAccessories Included: Exhaust Air Silencer
Polypropylene/Aluminium 39.5 kg.Polypropylene/Stainless 50.5 kg.PVDF/Aluminium 50.5 kg.PVDF/Stainless 70 kg.
630 x 380 x 670 mm.
TYPICAL CODE = B50. 05. PT. BB. EEP - LF
Performance curve
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVEL
VALVE SEATSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENEP : POLYPROPYLENE
VALVE BALLSB : BUNA-N T : PTFEE : EPDM V : VITONN : NEOPRENES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-N T : PTFEE : EPDM V : VITONH : POLYESTER (HYTEL)N : NEOPRENEP : POLYURETHANER : SANTOPRENEO : ONE-PIECE PTFE
WETTED COMPONENTSP : POLYPROPYLENEK : KYNAR (PVDF)G : CONDUCTIVE POLYPROPYLENE
NON-WETTED COMPONENTST : ALUMINIUM / EPOXY PAINTEDW: 316 STAINLESS STEEL / EPOXY
PAINTED
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
FEE
T H
EA
D
PS
I HE
AD
ME
TRE
S H
EA
D
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
234280
324
620
289AIR INLET
AIR INLET3/4” BSP(F)
DISCHARGE OUTLET2” ANSI 150 FLANGE
AIR EXHAUST3/4” BSP(F)
SUCTION INLET2” ANSI150 FLANGE
139
321561
617
14880
464
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 B r4 a(5 psi)8 3 a.0 B r
4 .5 psi( 3 )
B1.5 ar1. (2 7 psi)
2 0. Bar29 psi)
( .0
8.0 Bar AIR PRESSURE
( 16 p i)1
s
.0a
7 B r(1.5
i
01 ps )
6.0 Bar(87 psi)
.0 Ba5
r2. p i
(75
s )
LUBE FREE
23
Moulded Non Metallic Series
Air Operated Diaphragm Pump Range B 50
www.blagdonpump.comwww.blagdonpump.com
Air valve designed for in-line maintenanceEnd ported for improved flowPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrityRobust construction
TECHNICAL DATA;
METALLIC SERIES B50ALUMINIUM & CAST IRON
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Aluminium 38 kg.Cast Iron/Aluminium 63 kg.Cast Iron 90 kg.
540 x 350 x 750 mm.
TYPICAL CODE = B50. 05. AA. BB. BBB - LF
Performance curve
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVEL
VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMT : PTFE
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONS : 316 STAINLESS STEELT : PTFE
DIAPHRAGMSB : BUNA-N V : VITONT : PTFE E : EPDMH : POLYESTERP : POLYURETHANEO : ONE PIECEN : NEOPRENER : SANTOPRENE
WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
256 118.5
625578 CRS
14 4760
460229 CRS
20 SLOT DEPTH
SUCTION INLET2” BSP
AIR INLET3/4” BSP
340AIR INLET/EXHAUST
254127
663
139
316246.5
493 IN-LINE OPTIONDISCHARGE OUTLET2” BSP
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
FEE
T H
EA
D
PS
I HE
AD
ME
TRE
S H
EA
D
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 B r4 a(5 psi)8 3 a.0 B r
4 .5 psi( 3 )
B1.5 ar1. (2 7 psi)
2 0. Bar29 psi)
( .0
8.0 Bar AIR PRESSURE
( 16 p i)1
s
.0a
7 B r(1.5
i
01 ps )
6.0 Bar(87 psi)
.0 Ba5
r2. p i
(75
s )
LUBE FREE
24
Metallic Series
Air Operated Diaphragm Pump RangeB 50
Performance curve
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrity316 Stainless Steel
TECHNICAL DATA;
METALLIC SERIES B50STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 70 kg.Stainless Steel 95.5 kg.Stainless Steel/Cast Iron 95.5 kg.
630 x 380 x 670 mm.
TYPICAL CODE = B50. 05. SA. BB. BBS - LF
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVEL
VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMV : VITON
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMT : PTFES : 316 STAINLESS STEELV : VITON
DIAPHRAGMSB : BUNA-NE : EPDMH : POLYESTERP : POLYURETHANET : PTFER : SANTOPRENEN : NEOPRENE
WETTED COMPONENTSS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
130
260328
30
269AIR INLET
AIR INLET3/4” BSP(F)
FLUID OUTLET2” BSP(F)
FLUID INLET2” BSP(F)
169
381 110
64
579
590139
478
Ø8.7 HOLES THRO’ BASE LEG
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
FEE
T H
EA
D
PS
I HE
AD
ME
TRE
S H
EA
D
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 B r4 a(5 psi)8 3 a.0 B r
4 .5 psi( 3 )
B1.5 ar1. (2 7 psi)
2 0. Bar29 psi)
( .0
8.0 Bar AIR PRESSURE
( 16 p i)1
s
.0a
7 B r(1.5
i
01 ps )
6.0 Bar(87 psi)
.0 Ba5
r2. p i
(75
s )
Performance curve
LUBE FREE
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com
Metallic Series
Air Operated Diaphragm Pump Range B 50
Performance curve
Simple construction, easy to maintainSelf priming, ideal for emptying containersPressures to 8.6 barFlow rates up to 530 litres/minuteBolted construction for greater integrity316 Stainless Steel
TECHNICAL DATA;
METALLIC SERIES B50STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 530 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel/Aluminium 70 kg.Stainless Steel 95.5 kg.Stainless Steel/Cast Iron 95.5 kg.
630 x 380 x 670 mm.
TYPICAL CODE = B50. 05. SA. BB. BBS - LF
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVEL
VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNA-NE : EPDMV : VITON
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMT : PTFES : 316 STAINLESS STEELV : VITON
DIAPHRAGMSB : BUNA-NE : EPDMH : POLYESTERP : POLYURETHANET : PTFER : SANTOPRENEN : NEOPRENE
WETTED COMPONENTSS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
130
260328
30
269AIR INLET
AIR INLET3/4” BSP(F)
FLUID OUTLET2” BSP(F)
FLUID INLET2” BSP(F)
169
381 110
64
579
590139
478
Ø8.7 HOLES THRO’ BASE LEG
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
FEE
T H
EA
D
PS
I HE
AD
ME
TRE
S H
EA
D
FLUID FLOW RATE
0 20 40
20
40
60
0 50 100
10
20
200150 250
30
40
- UK GPM60 80 100
550 - L/Min
131
98
66
33
350300 400 500450
80
100
120
60
50
70
80 262
229
197
164
120
340 M /hr AIR CONSUMPTION(23.5 CFM)
330 M /hr(17.5 CFM) 360 M /hr
(35 CFM)
380 M /hr(47 CFM)
3100 M /hr(59 CFM)
3140 M /hr(82.5 CFM)
320 M /hr(12 CFM)
.0 B r4 a(5 psi)8 3 a.0 B r
4 .5 psi( 3 )
B1.5 ar1. (2 7 psi)
2 0. Bar29 psi)
( .0
8.0 Bar AIR PRESSURE
( 16 p i)1
s
.0a
7 B r(1.5
i
01 ps )
6.0 Bar(87 psi)
.0 Ba5
r2. p i
(75
s )
Performance curve
LUBE FREE
25
www.blagdonpump.comwww.blagdonpump.com
Robust construction, easy to maintainCan easily handle viscous, high S.G and high head applicationsSmooth action, less vibration and wearPressures to 16 barFlow rates up to 350 litres/minuteBolted construction for greater integrityReliable pneumatic air valveStalls against closed head without damage.Re-start on demand
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
The above drawing shows Stainless Steel only.
TECHNICAL DATA;
METALLIC SERIES-FULL FLOW 2:1 B50STAINLESS STEEL, ALUMINIUM
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 350 Itrs/minMax. Working Pressure: 16 barMax. Solid Particle Size: 6 mm.Air Inlet: 3/4" BSP(F)Max Air Inlet: 8 barTemperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Aluminium 52 kg.Stainless Steel/Aluminium 78 kg.
850 x 450 x 800 mm.
TYPICAL CODE = B50. 05. SA. W3. BBS
Performance curve
MODEL - B50 : Standard X50 : ATEX approved
DESIGN LEVELVALVE SEATSS : A : ALUMINIUM
316 STAINLESS STEEL
VALVE BALLSB : BUNA-NN : NEOPRENEE : EPDMV : VITONT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSB : BUNA-NN : NEOPRENEE : EPDMH : POLYESTERP : POYURETHANEV : VITONT : PTFER : SANTOPRENEO : ONE PIECE
WETTED COMPONENTSS : 316 STAINLESS STEELA : ALUMINIUM
NON-WETTED COMPONENTSA : ALUMINIUM
VALVE TYPEB : BALLW: WEIGHTED
MODEL DESIGNATION
FEE
T H
EA
D
ME
TRE
S H
EA
D
100 231
200 250 3000 50 100 150
20
40
60
80
350 - L/min
46
92
138
185
110
90
10
20
30
40
50
60
70
80
100
130
120
140
150
160
PS
I HE
AD
120
140
160
180
200
220
277
323
369
416
462
508
FLUID FLOW RATE10 80 - UK GPM20 30 40 50 60 70
212577
130260320
67
280
595490
AIR INLET3/4” BSP(F)
FLUID INLET2” BSP(F)
FLUID OUTLET2” BSP(F)
SILENCER (FITTED)
3/4” BSP(M)
316729139
4 HOLES THRO’ Ø8.5
80Ba
AIR ESSURE
. r
PR
11 si)
(6p
a7.0 B r.5 p i
(101 s )
B6.0 ar7(8 psi)
5.0 Bar72. p )( 5 si
4.0ar
B(5 p i)8 s
3.0 Bar(43.5 ps )i
B r1.5 a1.(2 7 psi)
2.0 Ba r29. p i)
( 0 s
330 M /hr(17.6 SCFM)
340 M /hr(23.5 CFM)
3180 M /hr(106 CFM)
3160 M /hr(94 CFM)
390 M /hr(53 CFM)
365 M /hr(38 CFM)
3135 M /hr AIR CONSUMPTION(79.5 CFM)
26
Full Flow High Pressure
Air Operated Diaphragm Pump RangeB 50
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 27
Hygienic Series
Air Operated Diaphragm Pump Range B 50
Range of DIN/RJT and Ferrule connectionsSelf priming for emptying containersFood grade elastomers-EPDM/PTFEPressures to 8.6 barCapable of handling high viscosity & S.GCertified CIP cleanableEU Design approval316 Stainless steel
oPump stand option for 180 rotation in place
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
HYGIENIC SERIES B50STAINLESS STEEL
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 500 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 10 mm.Air Inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 6.1 m.Suction Lift (Wet): 7.6 m.Fluid Inlet/Outlet: 2" RJT (Standard)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Stainless Steel 64 kg.
660 x 430 x 880 mm.
TYPICAL CODE = B50. 05. ZF. BB. EEE - LF
Performance curve
MODEL - B50 StandardX50:ATEX approved
DESIGN LEVEL
VALVE SEATSE : FOOD GRADE EPDMT : PTFE
VALVE BALLSE : FOOD GRADE EPDMT : PTFES : 316 STAINLESS STEEL
DIAPHRAGMSE : FOOD GRADE EPDMO : ONE PIECE PTFE
WETTED COMPONENTSZ : 316 STAINLESS STEEL (ELECTRO POLISHED)
NON-WETTED COMPONENTSS : 316 STAINLESS STEELF : NICKEL PLATED ALUMINIUM
VALVE TYPEB : BALL
SUCTION ORIENTATIONB : BOTTOM
198
689
540270
30572
SUCTION INLET2” RJT - STANDARD OTHER OPTIONS AVAILABLE
90
714598
382AIR
EXHAUST
AIR EXHAUST
3/4” BSP
322225
Ø61 RUBBER MOUNTING PADS (M8 FIXING BOLTS)
AIR INLET3/4” BSP
DISCHARGE OUTLET - 2” RJT STANDARDOTHER OPTIONS AVAILABLE
382AIR INLET
FEE
T H
EA
D
ME
TRE
S H
EA
D
FLUID FLOW RATE
PS
I HE
AD
10
0
20
30
40
50
60
70
80
100
0
20
40
60
80
120
0
0
100 - UK GPM20
100 200 300 400 500 - L/MIN0
33
66
99
131
164
197
230
262
40 60 80
a7.0 B r
(100 psi)
a8.0 B r(
s )116 p i
4 1 a. B r6 p i( 0 s )
1 Ba SS RE
.4 r AIR PRE U2 p( 0 si)
a2.7 B r0 s(4 p i)
5.5 Bar80 psi)(
330 M /hr(17.6 CFM)
370 M /hr(41 CFM)
3110 M /hr(65 CFM)
3150 M /hr AIR CONSUMPTION(88 CFM)
LUBE FREE -
www.blagdonpump.comwww.blagdonpump.com28
Metallic Series
Air Operated Diaphragm Pump RangeX75
Air valve will not stall in mid positionAir valve designed for in-line maintenanceEnd ported for improved flowPressures to 7 barFlow rates up to 889 litres/minuteBolted construction for greater integrityRobust construction
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
METALLIC SERIES X75
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 889 Itrs/minMax. Working Pressure: 7 barMax. Solid Particle Size: 10 mm.Air inlet: 3/4" BSP(F)Temperature Limits: Determined by ElastomersSuction Lift (Dry): 4.0 m.Suction Lift (Wet): 5.0 m.Fluid Inlet/Outlet: 3" BSP(F)Installation: Surface mountedAccessories Included: Exhaust air Silencer
Aluminium 53.5 kg.Cast Iron/Aluminium 90 kg.Stainless Steel/Aluminium 90 kg.
720 x 350 x 900 mm.
TYPICAL CODE = X75. 01. AA. BB. BBB
Performance curve
MODEL - X75 : ATEX approved
DESIGN LEVEL VALVE SEATSA : ALUMINIUMS : 316 STAINLESS STEELN : NEOPRENEB : BUNAE : EPDMV : VITONT : PTFE
VALVE BALLSB : BUNAN : NEOPRENEE : EPDMR : SANTOPRENET : PTFE
DIAPHRAGMSB : BUNAN : NEOPRENER : SANTOPRENEV : VITONT : PTFEE : EPDM
WETTED COMPONENTSA : ALUMINIUMC : CAST IRONS : 316 STAINLESS STEEL
NON-WETTED COMPONENTSA : ALUMINIUMC : CAST IRON
VALVE TYPEB : BALLW: WEIGHTED
SUCTION ORIENTATIONB : BOTTOM
BAR
PSI
HEA
D
20(34) 40(68)60(102)
80(136)
100(170)
100
80
60
40
20
00
1
2
3
4
5
6
7
120(204)
140(238)
0(6 8 B r)
1 0 PS . a I
PS . 4 B8 I (5 4 a0
r)
6 P I( 4. 8 ar)0 S 0 B
a0 P I (2 2
4 S .7 B r)
r r u0 P (1 6 B leP e re
2 SI .3 a ) Ai In t r ss
30
2025
1015
5
9.1
67.6
34.5
1.5
NPS
HR
MET
ERS
FEET
0
0
100
20
200
40
300
60
400
80 100 120 140 160 180 200 220 240
500 600 700 800 900
Liters per minute
CAPACITY
U.S. Gallons per minute
3CFM (M /hr)
422
129
60
200
257
3/4” BSPAIR INLET
1” BSPEXHAUST
149
701
298
761
16
815
327
435
577
184
305
367
62
10
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 29
Submersible Centrifugal Pump
Air Operated Diaphragm Pump Range AP50
SubmersibleDesigned for underground useHigh intensity spark freeRobust constructionModular construction, easy to maintainSpring loaded vanes for immediate start upPumps solid particles up to 6mmViton seal options for higher temperaturesIntegral baseplate/strainerAutomatic overspeed controlIntegral oil reservoir - automatic lubrication
Note: The above performance curve has been determined under the following conditions: flooded suction, pumping clean water through a calibrated electronic flow meter with pulsation dampener and silencer fitted.
TECHNICAL DATA;
SUBMERSIBLE CENTRIFUGAL PUMP
Shipping Weights:
Shipping Dimensions:
Maximum Delivery: 560 Itrs/minMax. Working Pressure: 8.6 barMax. Solid Particle Size: 6 mm.Air inlet: 3/4" BSP(F)Temperature Limits: Determined by SealsSuction Lift (Dry): N/ASuction Lift (Wet): N/AFluid Inlet/Outlet: 2" BSPT(F)Installation: N/AAccessories Included: None
Cast Iron 33 kg.
500 x 380 x 260 mm
Industries
MiningConstructionDe-wateringSewageWell-pointing
Performance curve
10
20
30
40
FLUID FLOW RATE
ME
TRE
S H
EA
D
PS
I HE
AD
FEE
T H
EA
D
50
162
458
41
11
147
FLUIDOUTLET2” BSPT(F)
AIREXHAUST1” BSP(F)AIR INLET
3/4” BSP(M)
Ø 197 RIBBEDPUMP INLET
Ø 406 (16”) MINIMUMBOREHOLE DIAMETER
7 B r2. a( 40 psi)
.a
1 4 B r AIR PRESSURE
s(20 p i)
4 r.1 Ba6
)( 0 psi
5.5 Bar (80 psi)
6.9 Bar(10
s0 p
i)
370 M /hr(41.2 CFM)
35 M /hr(20.6 CFM)
3
100 M /hr AIR CONSUMPTION(58.9 CFM)
3
35
30
120
25
100
20
80
15
60
10
40
520
0 0
20
50 100 150 200 250 300 350 400 450 500 550 600 - L/MIN
40 60 80 100 120 130 - UK GPM
www.blagdonpump.comwww.blagdonpump.com30
Air Operated Diaphragm Pump Range
1” Aluminium 4 Port Pump also available in Polypropylene and Kynar
1” Industrial Stainless Steel Pump c/w Steam Jacket
1” Stainless Steel 2:1 Pump c/w Custom Flange Design
2” Hygienic on Trolley c/w Stainless Steel Trolley
1” Hygienic Pump c/w Steam Jackets
1/2” Aluminium with Stroke Counter
1” Stainless Steel 2:1 Pump Steam Jacket
4 Port Pump 1/2” Aluminiumwith StrokeCounter
2” Hygienic on Trolley
1” Hygienic
1” Stainless with
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 31
Bespoke Products & Blagdon Accessories
Batch ControlLinkage to control equipmentGreater process control10 - 30v DC, PNP normally open
Virtually pulsation free flowsSteadier pressuresLess vibration and noiseSimple installationVariety of sizes and materialsAutomaticallyself-charging
ANSI 150 as standard - also available:-- ANSI 300- PN16- Food Industry - RJT, DIN, TRI-CLAMPEase of connections to pipework systems
Pulsation Dampener
Valve Block with Sensors
Filter Regulators
Flanges
Oil Bottle AssemblyExclusive to Blagdon PumpRobust heavy duty designSuitable for arduous installationsSafe for underground use - no aluminium
Maintains constant oil density with varying flowRemote installation for ease of maintenanceEnsures clean, filtered airCan be controlled independently of other equipment
www.blagdonpump.comwww.blagdonpump.com32
Blagdon Website
VISIT THE BLAGDON WEBSITE - INFORMATION IS JUST 2 CLICKS AWAY
The Blagdon website operates on a 2 click policy. This means that wherever you are within the site it will never take more than 2 clicks to navigate to the information you require, whether that be technical data like a manual or datasheet, or a copy of the Company brochure.
The sites purpose is to have as much information as possible available to our Customers. Detailed opposite is a chart showing some of the most frequently asked questions and where the answers can be found.
Also shown within the web pages are:
Chemical Resistance ChartsKit RevisionsIndex with Components and DrawingsViscosity Correction CurveFlow Rate Conversion CalculatorShipping Weights and DimensionsBlagdon Numbering System
Products
Applications
Materials
About Our Pumps
About Blagdon Pump
Blagdon News
Distributors
Literature
Technical Details Troubleshooting Installation
A unit of
Contacts
BrochureBrochure available online:
Brochure available to downloadTo view the brochure online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
Product LiteratureProduct specific literature is available which includes:
Technical dataPerformance curvesApplicable industries/applicationsAvailable optionsTo view this online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
www.blagdonpump.com www.blagdonpump.comwww.blagdonpump.com 33
VISIT THE BLAGDON WEBSITE - INFORMATION IS JUST 2 CLICKS AWAY
The Blagdon website operates on a 2 click policy. This means that wherever you are within the site it will never take more than 2 clicks to navigate to the information you require, whether that be technical data like a manual or datasheet, or a copy of the Company brochure.
The sites purpose is to have as much information as possible available to our Customers. Detailed opposite is a chart showing some of the most frequently asked questions and where the answers can be found.
Also shown within the web pages are:
Chemical Resistance ChartsKit RevisionsIndex with Components and DrawingsViscosity Correction CurveFlow Rate Conversion CalculatorShipping Weights and DimensionsBlagdon Numbering System
Products
Applications
Materials
About Our Pumps
About Blagdon Pump
Blagdon News
Distributors
Literature
Technical Details Troubleshooting Installation
A unit of
Contacts
BrochureBrochure available online:
Brochure available to downloadTo view the brochure online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
Product LiteratureProduct specific literature is available which includes:
Technical dataPerformance curvesApplicable industries/applicationsAvailable optionsTo view this online go to – LITERATURETo order additional copies go to – OTHER ENQUIRIES
Pakistan
Indonesia
Latvia
Philippines
Italy
Malaysia
Poland
Japan
Netherlands
India
Korea
Norway
UK
SwedenSpainSouth Africa
USA Venezuela
TurkeyThailand
Singapore
UAE
GLOBAL NETWORK
Finding the pump you want couldn’t be easier...
Worldwide Distribution
Australia Austria Belgium
Denmark
Germany
Eire
Hong Kong
Columbia
Finland
Hungary
Czech Republic
France
Chile ChinaCanada
How do I get a quotation?
Go to Contacts
I’d like to speak to a member of staff
Go to Contacts
I’d like to download some sales material
Go to Literature
I’d like to download some technical information
Go to Technical Details
Can the pump handle my process?
Go to Technical Details
What options do I have?
Go to Products
How does an air operated pump work?
Go to Blagdon Pump Tutorial
Why use an air operated pump?
Go to About Our Pumps
Saudi Arabia
Other Enquiries Links
Home Sitemap Website FAQ's Website Feedback
At Blagdon we are committed to providing our Customers with an exceptional product.
Along with our global network of Distributors, will endeav-our at all times to provide unrivalled customer satisfaction.
To find your local Distributor click on DISTRIBUTOR from the home page.
Russia
BLAGDON PUMP(IDEX ECO - European Commercial Operations)
R79 Shannon Industrial Estate, Shannon, Co. Clare, IrelandTel: +353 (0) 61 471933 • Fax: +353 (0) 61 475046
E-mail: [email protected] • Web: www.blagdonpump.com
IDEX LACO(Latin America Commercial Operations)
Hegel 153-602 Colonia Polanco11560 Mexico D.F. Mexico
Tel: +52 (55) 5255 1357Fax: +52 (55) 5255 1356
E-mail: [email protected]: www.blagdonpump.com
IDEX ACO(Asian Commercial Operations)
IDEX Asia Pacific Pte. Ltd63 Hillview Ave. #7-08
Lam Soon Industrial BuildingSingapore 669-569Tel: +65 6314 6131Fax: +65 6764 4020
E-mail: [email protected]: www.blagdonpump.com
LOCAL DISTRIBUTOR
www.blagdonpump.combpprodbr-rev0210 © 2010 BLAGDON PUMP, All rights reserved.