The R&D Zeeko department designed a brand new foil in the 2016 range : an alloy foil with the best quality/price ratio.
After winning all the magazine tests in 2015, the new 2016 Alloy Hydrofoil pushes the limit of the quality and the rigidity.
The front and back wings of the alloy foil are made with a new Pre-Preg technology using the molds of the Carbon Series wings.
The performance of the white and blue edition hydrofoil is at the highest lever for an alloy hydrofoil.
The alloy foil is fully removable, comes with carry strengthened case, protecting each element of the foil, allowing easy
storage and transport.
What's new in 2016:
- New Design of the fuselage
connection to the wings and the
mast. Thanks to a new technology of CNC, It o
at low speed.
The fuselage is even easier to be assembled, the 2 plastics connectors to the wings are deleted.
Also the fuselage is made with a new aluminium alloy which gives more rigidity, then more control at high speed and
during turns.
- New plate
The Foil is suitable to all board of the market with inserts and rails.
Also the plate is made with a new aluminium alloy which gives more rigidity to the plate, then more control at high
speed and during turns.
- New wings
PERFORMANCES
The alloy foil has a very good speed potential, thanks to its stability.
Highly scalable, you will learn the foil and improve without being limited by its performance.
ACCESSIBILITY & freeride / Ideal for beginners
Here are the advantages of using alloy foil instead of a carbon foil, in order to learn how to control a foil :
-
- The yaw e ect is less felt = you get more control
(To illustrate the yaw e
point the front wing)
- The speed is more controllable.
- The price among the lowest in the market without losing quality, is a decisive argument for novices.
The anhedral front wing increases the control at high speed and during turns specially compare to the black and white hydrofoil
Edition.
The front wing is design with an anhedral curve giving more control at high speed. Wings are made using a new process
of molding using Pre preg !berglass.
ZEEK
O K
ITES
Foil m
aker
since
201
0
R&D since
200
8
MAST & FUSELAGE :
CONSTRUCTION
High quality alloy. Rigidity and corrosion resistance.
The two parts are anodized and painted, o ering double protection.
DIMENSIONS Length 90 cm Thickness 15 mm
CONNECTION MAST / BOARD
Plate
FRONT & BACK WINGS :
The shape of these two wings allows the supports are balanced between the front and back leg, and that
whatever the speed.
CONSTRUCTION
VERTICAL BACK FIN :
ect. The distance between the screws is the same
as on twin tip boards.
ideal for use in the waves
CONSTRUCTION
100% G10: durability and rigidity
SALT WATER & ALLOY
The aluminum parts are anodized and painted, o ering double protection. The
aluminum used is the most resistant to salt water.
It is recommended to use the T gel for the screws, supplied when buying.
ZEEK
O K
ITES
Foil m
aker
since
201
0
R&D since
200
8
Wings are made using a new process of molding using Pre preg !berglass.
ZEEK
O
Foil m
akR&
T H E I D E A L B O A R D S F O R T H E Z E E K O A L L O Y F O I L
P O C K E T B O A R D
Foil Board
155 x 46 x 2,5 cm
S L A S H B O A R D
Surf & Foil Board
ZEEK
O K
ITES
Foil m
aker
since
201
0
R&D since
200
8
E E T T B B O O A A
Foil Boaoaoarrrd d d d d
x 46 x 2,5 c
P P P P P P O O O O O O C C K K
Fo
15151515155 5 5 x
A A R R D D D D
cm