ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
Geeignet für:
BMW 1er E87, 3er E46, E90, Z4 E85
Beinhaltet wichtige Werkzeuge z.B. für folgende Arbeiten an Benzinmotoren N42, N46:
• Ein- und Ausbau der Nockenwellen und der variablen Nockenwellen-Einheit (Doppel Vanos)
• Prüfung und Einstellung der Nockenwellen Steuerzeiten
Die Nockenwellen- und Kurbelwellenarretie-rungen dürfen nicht als Gegenhalter zum Anziehen genutzt werden!
Suitable for:
BMW 1 series E87, 3 series E46, E90, Z4 E85
Include basic tools for example the following applications:
• Assembly and disassembly for the duplex camshafts
• To test the settings of camshafts and timings
Don´t use the camshaft and crankshaft locking as a counterholder to tighten the screws!
V42
83 A
H-I
Anwendungshinweis / Application NoteMotoreinstell-Werkzeug-Satz, BMWTiming Tool Set, BMW
V4283
�
� �
�
�
�
�
�
�
�
�
�
�
�
�
�
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
Dieser Werkzeugsatz dient zum Ausbau/Einbau sowie zum Zer-legen und Zusammensetzen der Lagerbrücke der Nockenwel-le / Valvetronic-Baugruppe.
Er wird zusammen mit dem Motoreinstell-Werkzeugsatz V4284 verwendet, die Werkzeug zur Einstellung des Motors z. B. beim Wechsel der Steuerkette oder der Nockenwellen enthält.
Anwendung
BMW: 1.8|2.0-Motoren|N42|N46|N46t (B18b)|B18|B20|B20a|B20b)
118i, E87|120i, E87|316i,E46|
316ti, E46, 318i, E46|318ti, E46|318i, E90|320i, E90|520i, E60|Z4, 2.0 E85|X3.2i, E83
Aufnahme für Lagerbrücke
Die kurze Stützstrebe muss an der richtigen Position angebaut werden. Die kurze Stützstrebe hat am unteren Ende eine erhöhte Kante, die in eine Aussparung in der Aufnahmeplatte passt.
Die Aufnahme für die Lagerbrücke muss auf einem Schraubstock montiert werden.
Zwischenhebel-Klammern
Die richtige Verwendung dieses Werkzeugs ist der Wartungs-anleitung oder Dokumentation des Herstellers zu entnehmen.
Ein-/Ausbauwerkzeug für Torsionsfeder
Die richtige Verwendung dieses Werkzeugs ist der Wartungs-anleitung oder Dokumentation des Herstellers zu entnehmen.
Anleitung Instruction
This kit is used for removal, installation plus dismantling and re-building the camshaft carrier bracket |Valvetronic assembly.
It is used in conjunction with the Engine Timing Tool Set V4284, which includes tools necessary for timing the engine when, for example, changing the cam chain or camshafts.
Applications
BMW: 1.8|2.0-Motoren|N42|N46|N46t (B18b)|B18|B20|B20a|B20b)
118i, E87|120i, E87|316i,E46|
316ti, E46, 318i, E46|318ti, E46|318i, E90|320i, E90|520i, E60|Z4, 2.0 E85|X3.2i, E83
Camshaft carrier mounting fi xture assembly
Take care to assemble the short support strut in the correct position. The short strut has a raised lip on its base which corresponds to a recess in the fi xture plate.
The mounting fi xture assembly is designed to be mounted on a vice.
Intermediate Lever Clamps
Refer to the manufacturer’s service instructions or docu-mentation to establish the correct procedures for using this equipment.
Torsion spring remover / installer
Refer to the manufacturer’s service instructions or docu-mentation to establish the correct procedures for using this equipment.
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
(DE
) Typ
Mod
ell
Mot
orJa
hr(G
B) T
ype
Mod
elE
ngin
eYe
ar
BMW-OE: 11 9 320
BMW-OE: 11 9 320
BMW-OE: 11 9 320
BMW-OE: 11 9 302
BMW-OE: 11 9 303
BMW-OE: 11 9 310
11 9 390
11 9 390
BMW-OE: 11 9 301
BMW-OE: 11 9 270
BMW-OE: 11 9 340
BMW-OE: 11 9 350
BMW-OE: 11 9 292
BMW-OE: 11 9 291
BMW-OE: 11 9 293
BMW-OE: 11 9 190
12
34
56
78
910
1112
1314
1516
BMW
E46
316i
01-0
5x
xx
xx
xx
xx
xx
xx
xx
x31
6ti C
ompa
ct01
-05
xx
xx
xx
xx
xx
xx
xx
xx
318i
01-0
7x
xx
xx
xx
xx
xx
xx
xx
x31
8ti C
ompa
ct01
-05
xx
xx
xx
xx
xx
xx
xx
xx
E60
520i
04-0
8x
xx
xx
xx
xx
xx
xx
xx
xE
83X
3 2,
005
-08
xx
xx
xx
xx
xx
xx
xx
xx
E85
Z4 2
.0i
04-0
8x
xx
xx
xx
xx
xx
xx
xx
xE
8711
8i04
-07
xx
xx
xx
xx
xx
xx
xx
xx
120i
04-0
7x
xx
xx
xx
xx
xx
xx
xx
xE
9031
8i05
-08
xx
xx
xx
xx
xx
xx
xx
xx
320i
05-0
8x
xx
xx
xx
xx
xx
xx
xx
x
Fixierbrücke NockenwelleCamshaft Setting Plate
Absteckdorn, abgewinkeltLocking Pin, Bent
Fixierleiste GeberräderSensor Wheel Locking Tool
V428
3M
otor
eins
tell-
Wer
kzeu
g-Sa
tz /
Tim
ing
Tool
Set
BM
W B
enzi
n / P
etro
l
Stützschraube mit MutterBolt and Nut
DrehfedernhalterTorsion Spring Tool Holder
Fixierwinkel NockenwelleCamshaft Setting Plate
Fixierschraube 2 StkFixing Screw 2 pcs.
RändelschraubeKnurled Screw
Zwischenhebelklammern 8 Stkintermediate Lever Clamp 8 pcs
NockenwellendrehschlüsselCamshaft Setting Tool
SpannwerkzeugTiming Chain Tensioner Pre-load Tool
ExzenterwellenhalterEccentric Shaft Holder
Lagerbrücken AufnahmeCarrier Bracket Mounting Fixture
Langer Stehbolzen 3 StkStud Bolt, long 3 pcs
Kurzer Stehbolzen 1 StkStud Bolt, short 1 pcs
Fixierwerkzeug ExzenterwelleInlet Camshaft Securing Tool
ViG
OR
Gm
bH
• ;
Am
La
ng
en
Sie
pe
n 1
3-15
• 4
2857
Re
msc
he
id •
GER
MA
NY
[ +
49 (0
) 21
91 /
97
95 •
\ +
49 (0
) 21
91 /
97
96 0
0 •
] in
fo@
vigo
r-eq
uip
men
t.com
• ^
vig
or-e
qui
pm
ent.c
om
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
V42
83 A
H-I
�
�
�
�
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
�
� �
� �
�
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
� �
�
� �
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
� �
���
��� ���
���
ViGOR GmbH • ; Am Langen Siepen 13-15 • 42857 Remscheid • GERMANY[ +49 (0) 21 91 / 97 95 • \ +49 (0) 21 91 / 97 96 00 • ] [email protected] • ^ vigor-equipment.com
���
���
���
���
��