Just KissesDesigned by Ariga Mahmoudlou for RKwww.robertkaufman.com
Featuring
ARROWHEAD
For questions about this pattern, please email [email protected].
Finished quilt measures: 55” x 65”
page 2
Color Fabric Name/SKU Yardage
K001-1837 CHALKBOARD
K001-1339 SNOW
K001-863 HAZE
K001-457 SHADOW
G
H
I
J
1/2 yard
1/3 yard
1/3 yard
1/3 yard
1/2 yard
1-3/4 yards
1/3 yard
1/3 yard
1/3 yard
1/2 yard
1/2 yard
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
K001-1387 WHITE
K001-295 GRAPHITE
K001-862 GOTHAM GREY
K001-1071 CHARCOAL
K001-856 QUICKSILVER
K001-854 OVERCAST
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
F
Copyright 2019, Robert KaufmanFor individual use only - Not for resale
You will also need:3-1/2 yards for backing
K001-862 GOTHAM GREY
*Also used for Fabric C
Binding*
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
Notes Before You Begin
page 3
From Fabric A, cut:fourteen 2-1/2” x WOF strips. Set aside for strip piecing.seventeen 1-1/2” x WOF strips. Set aside for the sashings and outer border.
From each of Fabrics B-D and H-J, cut:four 2-1/2” x WOF strips. Set aside for strip piecing.
From each of Fabrics E-G, cut:six 2-1/2” x WOF strips. Set aside for strip piecing.
From the Binding Fabric, cut:seven 2-1/2” x WOF strips
Step 1: Gather:one Fabric A stripone Fabric B strip one Fabric C stripone Fabric D strip
Sew together in that order to form a strip set. Repeat to make a total of four A strip sets. Press the seams to one side.
Cutting Instructions
Assemble the A Block Units
ABCD
Step 2: Cut each strip set into four 8-1/2” squares, for a total of sixteen squares.
Step 3: With the Fabric D strip on the bottom edge, cut eight squares from lower left to upper right. The portion on the right will now be called A1. The portion on the left will now be called A2. Discard four A2 units.
Step 4: With the Fabric D strip on the bottom edge, cut eight squares from lower right to upper left. The portion on the right will now be called A4. The portion on the left will now be called A3. Discard four A4 units.
A2
A1
A4
A3
page 4
Step 5: Gather:one Fabric A stripone Fabric E strip one Fabric F stripone Fabric G strip
Sew together in that order to form a strip set. Repeat to make a total of six B strip sets. Press the seams to one side.
Assemble the B Block Units
AEFG
Step 6: Cut each strip set into four 8-1/2” squares, for a total of twenty-four squares.
Step 7: With the Fabric G strip on the bottom edge, cut eight squares fromlower left to upper right. The portion on the right will now be called B1. Theportion on the left will now be called B2. Discard four B2 units.
Step 8: With the Fabric G strip on the bottom edge, cut eight squares fromlower right to upper left. The portion on the right will now be called B4. Theportion on the left will now be called B3. Discard four B4 units.
B2
B1
B4
B3
Step 9: With the Fabric G strip on the bottom edge, cut eight squaresfrom corner to corner to create four triangles. The portion on the rightwill now be called B5. The portion on the left will now be called B6. Theportion on the top will now be called B7. Discard the portion on thebottom.
B7
B8
B6 B5
page 5
Step 10: Gather:one Fabric A stripone Fabric H strip one Fabric I stripone Fabric J strip
Sew together in that order to form a strip set. Repeat to make a total of four C strip sets. Press the seams to one side.
Assemble the C Block Units
AHIJ
Step 11: Cut each strip set into four 8-1/2” squares, for a total of sixteen squares.
Step 12: With the Fabric J strip on the bottom edge, cut eight squares fromlower left to upper right. The portion on the right will now be called C1. Theportion on the left will now be called C2.
Step 13: With the Fabric J strip on the bottom edge, cut eight squares fromlower right to upper left. The portion on the right will now be called C4. Theportion on the left will now be called C3.
C2
C1
C4
C3
page 6
Assemble the Quilt
Step 14: Arrange the A, B and C triangle units to form eight columns, noting the placement and orientation shown in the Quilt Assembly Diagram.
Step 15: Sew each column together, pressing seams to one side. Take extra care to handle the bias edges lightly to prevent stretching. Each column should measure approximately 62-3/4” long.
Step 16: Sew the 1-1/2” Fabric A sashing and strips together, end-to-end. Measure the length of the columns through the center to find the average length. Cut nine sashing strips to this length.
Step 17: Sew the pieced columns and the sashing strips together, placing a sashing strip between each column and on the left and right edges of the quilt. Tip: Pin at the ends, middle and at several points in between and sew with the pieced column on the bottom as you sew to prevent the pieced column from stretching or warping.
Step 18: Measure the width of the quilt through the center. Cut two top/bottom border strips to this length. Sew the borders to the top/bottom of the quilt center. Press toward the border.
Your quilt top is complete! Baste, quilt, bind and enjoy!
This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2019. All rights reserved.
C4
C3
C4
B3
B7
B1
A1
A2
B2
C1
A3
A4
B4
C3
B6 B5
B3
C2
C1
C2
B1
A3 A1
B7
C4
C3
C4
B3
B7
B1
A1
A2
B2
C1
A3
A4
B4
C3
B6 B5
B3
C2
C1
C2
B1
A3 A1
B7
C4
C3
C4
B3
B7
B1
A1
A2
B2
C1
A3
A4
B4
C3
B6 B5
B3
C2
C1
C2
B1
A3 A1
B7
C4
C3
C4
B3
B7
B1
A1
A2
B2
C1
A3
A4
B4
C3
B6B5
B3
C2
C1
C2
B1
A3A1
B7