Supported by
Date: 22th April 2013 26th April 2013Location: Kuala Lumpur, Malaysia
Discover the latest updates on ASME codes and practical session from the ASME guru
Petrosync Lecturer
Very clear and well explained training!
Thank you! The exam is getting easier after I attend your training!
Great course. Easy to understand!
Good training for me and my team members. Will look forward to applying to my work!
Worth the time. Worth the cost!
ASME VIII Division 1 & 2ASME VIII Division 1 & 2
Pressure Vessel SeriesPressure Vessel Series
Testimonials
Case Studies, Discussion, and many
Practical exercises!
Prakash S. JoshiASME, API, TEMA Codes ExpertLife Fellow of Institution of Mechanical Engineers
More than 38 years of experienceDirector of the Centre for Petroleum StudiesLife Fellow of Institution of Mechanical Engineers Conducted more than 350 courses
Trained more than 1000 technical professional
More than 40 years of Industry experience
His students have 90% sucessfull rate in passing exam
Masterclass Overview
This Five-day program offers detailed insight and thorough understanding of the most common ASME codes, pertaining to design/ engineering and testing of the pressure vessels namely Section VIII Div. 1 and Section VIII Div. 2. This course emphasizes understanding of stated and implied requirements (i.e. content and intent) of the codes. The participants would be explained in detail the mechanics of adopting and applying the code rules and design formulas for different Design conditions and Services.
ASME VIII Div. 1 is the most commonly adopted code which is simple and used friendly, where as, ASME VIII Div 2 is an alternative code which provides a better engineered vessel with detailed stresses calculations and more rigorous testing, and allows for savings in material costs (thinner parts may be used).This course is designed to give the participants the confidence and practice for carrying out design and Fabrication and testing for new vessels and also carrying out strength calculations and assessment of integrity of existing vessels. How to adopt code rules for different types of vessels and with various service conditions will be illustrated with numerous case studies
Important code stipulation will be reviewed and discussed collectively with participants so as to address the difficulties and ambiguities they might have encountered during their working.
Specially Designed for
The course is designed for, but not limited to, mechincal, maintenance, and inspection / QAQC professionals who are involved in pressure vessel equipment.
Design Engineers / ManagersMechanical Engineers / ManagersMaintenance Engineers / Managers
Limited AttendeesThe course has limited seats to ensure maximum learning and experience for all delegates.
Certificate of AttendanceYou will receive a Certificate of Attendance bearing the signatures of the Trainer upon successful completion of the course. This certificate is proof of your continuing professional development.
Interactive TrainingYou will be attending training designed to share both the latest knowledge and practical experience through interactive sessions. This will provide you with a deeper and more long-term understanding of your current issues.
High Quality Course MaterialsPrinted course manual will provide you with working materials throughout the course and will be an invaluable source of reference for you and your colleagues afterward. You can follow course progress on your laptop with soft copies provided.
Petrosync Quality
Masterclass Objectives
Familiarize participants with the concepts and technical terms of the codesKnow the basic concepts of the codes and their design fundamentalsUnderstand salient features and differences between Div 1 and Div 2Know the design of Shell, Heads, and other pressure partsLearn design of nozzles and nozzle reinforcementsDesign for external pressure and Jacketed vesselsDesign requirements for low temperature operationDiscover the fabrication requirements, assembly and welding requirements. NDT and Inspection proceduresHow to carry out pressure testing, certification and stamping of Pressure Vessels.Introduction to Integrity assessment of in-service vessels.
QAQC Engineers / ManagersInspection Engineers / ManagersReliability Engineers / Managers
o Introduction to ASME codeso ASME Code system : Code revisions, Editions and addenda o Design principles adopted in ASME codes, o Understanding the code content, code intento Pressure Vessels : Categories and classification o Design rules, How these were derived and arrived ato Concept of working pressure, design pressure, MAWP,o Design of vessels under internal pressure, o Design of flat heads, dished heads, conical heads,o Nozzle and openings, reinforcement of openingso Adequacy of weld joints for shells and nozzleso Methods of design optimization, economical compliance.o Quality Assurance System as per ASME codeso Material identifications, use of unidentified materialso Material inspection Resolving non-conformanceso Fabrication methods, weld joint categorieso Weld joints longitudinal circumferential o Welded joints in nozzles and attachmentso Fabrication toleranceso PWHT requiremento Impact testing Requirementso QA/QC requirementso Pressure Testing of vesselso Selection of Pressure Test Methodso Test Procedureso Certification and Stamping of vessels
1
3
ASME VIII DIVISION 1 - PRESSURE VESSEL SERIES22th - 24th April 2013
SAVE COST IMPROVE PERFORMANCE REDUCE RISKPetroSync understands that in current economic climate, getting an excellent return on your training investment is critical for all our clients. This excellent training can be conducted exclusively for your organization. The training can be tailored to meet your specific needs at your preferred location and time. We will meet you anywhere around the globe. If you like to know more about this excellent program, please contact Jerry Tay (Conference Director) on +65 6415 4502 or email [email protected]
IN-HOUSE SOLUTIONS
08:00 09:00 Registration (Day1)09:00 11:00 Session I11:00 11:15 Refreshment & Networking Session I11:15 13:00 Session II13:00 14:00 14:00 15:30 Session III15:30 15:45 Refreshment & Networking Session II15:45 17:00 Session IV17:00 End of Day
PROGRAM SCHEDULE
Lunch
WHY YOU SHOULD ATTEND PETROSYNCS EVENTS
To ensure that all objectives of the course matches yours, all PetroSync programs are developed after intensive and extensive research within the industry
PetroSync programs focus on your immediate working issues to ensure that you are able to apply and deliver immediate results in real work situations
Application and implementation of industry knowledge and experience are the drivers for our course design, not theoretical academic lectures
PetroSync training focuses on practical interactive learning tools and techniques including case studies, group discussions, scenarios, simulations, practical exercises and knowledge assessments during the course. Invest a small amount of your time to prepare before attending the course to ensure maximum learning
PetroSync follows a rigorous selection process to ensure that all expert trainers have first-hand, up-to-date and practical knowledge and are leaders of their respective industrial discipline
ASME VIII DIVISION 2 - PRESSURE VESSEL SERIES25th - 26th April 2013
Introductiono Basic differences between ASME VIII Div. 1 and ASME VIII Div. 2.o Users design specification (UDS)o Quality Control, Inspection and test plan
Material requirementso Materials Permitted For Construction of Vessel Partso Supplemental Requirements for Carbon and Alloy Steelso Material Test Requirements
Design Requirementso Allowable Stress Basis, Safety factors for design load combinationso Design by Rule requirementso Design by analysis requirementso Design of Pressure parts: Shells and heads o Design Fatigue Curveso Additional Requirements for Very High Pressure Vessels
Fabrication Requirementso Fitting and Alignmento Welding Fabrication Requirementso Preheating and Heat Treatment of Weldments
Inspection and Examination Requirementso Examination groups for pressure vesselso Examination Method and Acceptance Criteria
08:00 09:00 Registration (Day1)09:00 11:00 Session I11:00 11:15 Refreshment & Networking Session I11:15 13:00 Session II13:00 14:00 14:00 15:30 Session III15:30 15:45 Refreshment & Networking Session II15:45 17:00 Session IV17:00 End of Day
PROGRAM SCHEDULE
Lunch
Petrosync Lecturer
Prakash S. JoshiASME, API, TEMA Codes ExpertLife Fellow of Institution of Mechanical Engineers
During his professional career spanning more than 38 years, Mr. Joshi worked in the areas of Plant Design,fabricaon, Inspecon, including in-service inspecon of Plant equipments, Pressure vessel, Heatexchangers, Piping systems and Tank-farms for Refineries, Petrochemical plants, Oil terminals, Ferlizer plants, Gas sweetening plants, Oshore producon facilies, and Power plants. His is well known expert inthe following codes.
ASME Sec. VIII Div. 1 and Div 2. API 510, API 570 and API 653 TEMA codes AD-MERKBLATTER
API 620, API 650 ASME B 31.1, B 31.3 ASME Sec. IX Brish Standard BS 5500
Mr. Joshi has worked with several mulnaonal companies worldwide and was, involved / interacted with leading mulnaonal giants, such as:
Toyo Engineering Umm-Al-Nar Refinery Balcke Durr GMBH
Mitsubishi Heavy Industries PT. PUSPETINDO, Indonesia. Thermax limitedetc, etc
Prior to commencement of training acvies, Mr. Joshi was Technical Advisor to Balcke- Durr GMBH, (a Group Company of Deutche Babcock), at Jakarta.
Training Acvies:
Mr. Joshi has carried out training in API / ASME and Welding courses for senior professionals from several leading companies world-over, including the following companies.
Saudi Aramco Kuwait Oil Company
Oman Refinery Germanischer Lloyd, Cairo
BAPCO Refinery, Bahrain SABIC Group, Saudi Arabia Qatar Liquefied Natural Gas Ltd. Ras Laan Gas, Doha SGS India Lloyds Register of shipping, India Kuwait Naonal Petroleum Company IKPT Jakarta, Indonesia MIGAS Jakarta, Indonesia BPCL Refineries, Bombay Oil and Natural Gas Corporaon-India HPCL Refinery, Vizag, India Reliance Industries, India
Mangalore Refinery, IndiaIndian Oil Corporaon
* For 7 or more delegates, please inquire for more attractive package.
* Important: Please note that registration without payment will incur a SGD 200 administration fee.
1st Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Company:____________________________________________ Industry : __________________________________
Address: _______________________________________________________Postcode: _________________________
Country: ________________________Email: __________________________________________________________
Attention Invoice to: ______________________________________________________________________________
Direct Line Number: ______________________________ Fax: _____________________________________________
PAYMENT METHODS
DELEGATES DETAILS
Please note: - Indicate if you have already registered by Phone Fax Email Web
I agree to PetroSyncs terms & conditions,payment terms and cancellation policy.
By Direct Transfer : Please quote invoice number(s) on remittance advicePetroSync LLP Bank details:Account Name: PetroSync LLPBank Number: 7144 Branch Code: 001 Account No: 010-2255-105
SWIFT Code of Correspondent Bank: SCBLSGSGXXX All bank charges to be borne by payer. Please ensure that PetroSync LLP receives the full invoiced amount.
By Credit Card : Please debit my credit card: Visa MasterCard
Card Number:
Name printed on card: _____________________________________________________________________
Expiry Date:
Name of Correspondent Bank : Standard Chartered Bank, 6 Battery Road, Singapore 049909
Security Code:
INVOICE DETAILS
Authorized Signature : ____________________________________________________________________________
Mrs Ms Dr Others Mr
DETAILS
PROGRAMME CONSULTANT
PAYMENT TERMS : Payment is due in full at the time of registration. Full payment is mandatory for event attendance.
2nd Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Mrs Ms Dr Others Mr
3rd Delegate Name
Direct Line Number: Email:
Job Title: Department:
Head of Department:
Mrs Ms Dr Others Mr
Please circle the package that you are attending!
INVESTMENT PACKAGES
Investment Package
Standard Price 19th April 2013
22th March 2013
Group Discount(3 or more Delegates)
Course Details
Title : ASME VIII Division 1 & 2 - Pressure Vessel SeriesDate : 22th - 26th April 2013Location : Kuala Lumpur, Malaysia
AMEX
TERMS AND CONDITIONS
CHARGES & FEE(s)
- For Payment by Direct TelegraphicTransfer, client has to bear both local and oversea bank charges.
- For credit card payment, there is additional 4% credit card processsing fee.
DISCLAIMERPlease note that trainers and topics were confirmed at the time of publishing; however, PetroSync may necessitate substitutions, alterations or cancellations of the trainers or topics. As such, PetroSync reserves the right to change or cancel any part of its published programme due to unforeseen circumstances. Any substitutions or alterations will be updated on our web page as soon as possible.
DATA PROTECTIONThe information you provide will be safeguarded by PetroSync that may be used to keep you informed of relevant products and services. As an international group we may transfer your data on a global basis for the purpose indicated above. If you do not want us to share your information with other reputable companies, please tick this box
CANCELLATION POLICYYou may substitute delegates at any time as long as reasonable advance notice is given to PetroSync. For any cancellation received in writing not less than fourteen (14) working days prior to the training course, you will receive credit voucher less a SGD $200 administration fee and any related bank or credit card charges.
Delegates who cancel less than fourteen (14) working days of the training course, or who do not attend the course, are liable to pay the full course fee and no refunds will be granted.
In the event that PetroSync cancels or postpones an event for any reason and that the delegate is unable or unwilling to attend in on the rescheduled date, you will receive a credit voucher for 100% of the contract fee paid. You may use this credit voucher for another PetroSync to be mutually agreed with PetroSync, which must occur within a year from the date of postponement.
PetroSync is not responsible for any loss or damage as a result of the cancellation policy. PetroSync will assume no liability whatsoever in the event this event is cancelled, rescheduled or postponed due to any Act of God, fire, act of government or state, war, civil commotion, insurrection, embargo, industrial action, or any other reason beyond management control.
* To enjoy the promotion & discount offer, payment must be made before deadline
* Prices include lunches, refreshments and materials. Promotion & discount cannot be combined with other promotional offers.
Please accept our apologies for mail or email that is incorrectly addressed. Please email us at [email protected] and inform us of any incorrect details. We will amend them accordingly.
Early Bird Offer
- If you have not received an acknowledgement before the training, please call us to confirm your booking.
Deadline
19th April 2013
Confirmation
Contact : Cay AagenEmail : [email protected] : +65 6415 4500 Fax : +65 6826 4322
FULL MASTERCLASS
SGD 2,995
SGD 2,795
10% discount for groups of 3 registering from the same organization at the same time