ATLAS - Professional Slurry Pump Manufacturer
&Slurry Pumping Solutions Supplier
ATLAS EQUIPMENT MANUFACTURING LTD., HEBEi, CHINA
Webslte:www.atlas-pump.com
Address:201# Tai hang St. HI-tech Zone, Shijiazhuang, China 050035
Sales Dept:
Tel: 86-311-85832151 / 85832152
Fax: 86-311-87777076
Email: [email protected]
Marketing Dept:
Tel: 86-311-85832212
Fax: 86-311-87777076
Email: [email protected]
ATLAS PUMP Slurry pumping solutions
Mining I Power Plant I Coal I Metallurgy I Chemlcal I Dredging
Atlas Pump on Site
Cappar Min•· CDdalca
Typical Applications
�wx WXH WL
pp
MIii discharge •
Coarse Sand • •
Coarse tailings • •
Phosphate matri• • • •
Flne talllngs • •
Heavy media • • •
Dredging
Gypsum • • •
Coal washing • • •
FGD • • •
Bulldlnl!II Matarlal-USD
WG vc SPH SPL SPS
•
• • •
• • •
• • • •
• • •
• • •
• •
• • • •
• • • • •
• • • •
Atlas Pump
• Multiple series, full sizes slurry pumps to meet requirements of different applications
• Diverse wear&corrosion resistant hard metal and elastomer material to handle various media
• Quality guaranteed with State-of-art of foundry, heat treatment, machining processes and well
equipped testing tools as well as reliable QC system
• Performance guaranteed with automatic pump testing station
• Quick delivery via stable and effective production system
We are not only slurry pump manufacturer,
but also can provide:
• Pumping system design and upgrading service, to achieve efficient operation.
• Perfect solution for slurry delivery system( EPC design) .
• On-site technical support & stocking service.
• Slurry pump contracting running service.
WX(R) Heavy Duty Slurry Pump
WX ( R ) hard metal/rubber heavy duty slurry pumps are designed for the most
difficult pumping applications for highly abrasive , high density or erosive slurries.
Extra thick sections at wear point and perfect Impeller structure ensures satisfa
ctory performance with long life, and needs minimum maintenance requirements.
Rubber lined pump expand applications to chemical products handling, several
different rubber options are available to meet different application needs.
Especially fit in aggressive applications like mill discharge,tailing transportation.
Discharge size: l"N18" / Capacities to:5400m'/hr / Heads to: 68m
Atlaa WX pump quick selection chart
Capacity( USgpm)
Capacity(l/i,)
Atlas WXR pump quick selection chart
Capacity(USgpm)
Capacity(l/s)
Single stage, single suction, overhang shaft, centrifugal, double casing horizontal pump
• Material:
Casing-Made of ductile Iron, ribs help casing to stand high pressure.
Wet Ends-Impellers, liners, volutes are made of high-chrome alloy or rubber, to resist wear, corrosion,
impact or erosion, parts made of metal or rubber are interchangeable.
• Bearing Assembly- Grease Lubrication and oil lubrication are optional depending on the usage.
• Seal options-Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit
different application.
• Part design:
Impeller-Wide passage and recessed vanes help to lower internal velocity to extend wear life.
Wet parts-Are designed to suit different working conditions like large particle or high head.
100 �
I
WXH High Head Heavy Duty Slurry Pump
WXH pump are designed for heavy duty applications require
high head per stage at high pressures, suitable for long distance
transporting or where other applications require more than
one pump in series.
Discharge size: 1 "N6" / Capacities to:1152m' /hr / Heads to: 98m
Atlas WXH pump quick selection chart
Capacity ( USgpm)
20 50 100 200 300 500 700 1000 1500 2000 2500 4000 5000 6COO 8000 10000 12000 14000 16000 20000 23000 110 · , , · · ·
60
"
40
30
10
350
300
200
'50
50
6 1015 20 30 40 70 100 140 200 300 500 600 700 800900 1000 1300 1500
Capacity (I/ s)
Single stage, single suction, overhang shaft, centrifugal, double casing horizontal pump
• Material:
Casing-Made of ductile Iron, ribs help casing to stand high pressure.
Wet Ends-Impellers, liners, volutes are made of high-chrome alloy to resist wear, corrosion,
impact or erosion.
• Bearing Assembly- Grease Lubrication and oil lubrication are optional depending on the usage.
• Seal options-Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit
different application.
• Part design:
Impeller-Large diameter, low turning speed ,wide passage and recessed vanes help to lower internal
velocity to extend wear life.
WL( R) Low to Medium Head
Heavy duty Slurry Pump
WL( R ) hard metal light to medium duty slurry pumps are designed
for continuous slurry handling applications where a large
flow at a low to medium head is required. Especially for
medium abrasive and lower solids concentrations applications.
Similar in structure to WX pump, WL( R )pumps are smaller
sized and relatively economical to handle mild slurries.
Discharge size: 20N650mm / Capacities to:10260m'/hr / Heads to: 63m
Atlas WL(R) pump quick selection chart
Capacity ( USgpm)
,0 100
Capacity (I/ s)
1000
Single stage, single suction, overhang shaft, centrifugal, double casing horizontal pump
• Material:
Casing-Made of ductile Iron, ribs help casing to stand high pressure.
10000
Wet Ends-Impellers, liners, volutes are made of high-chrome alloy or rubber, to resist wear, corrosion,
impact or erosion, parts made of metal or rubber are interchangeable.
• Bearing Assembly- Grease Lubrication and oil lubrication are optional depending on the usage.
• Seal options-Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit
different application.
• Part design:
Compare with WX(R), WL(R)pumps are smaller sized, more economical when dealing with mild media.
WG(H) Gravel & Dredge Pump
WG(H) pump are designed for continuous pumping of highly
abrasive slurries that containing large particles which other
Atlas pumps can not handle, Large passage inside casing make
it the best choice for gravel, dredging and other applications
where large particles needed to be handled, especially for
big flow, high concentration, high head media.
Low NPSH requirement and robust design ensures long life
under severe duties.
Discharge size: 4"N20" / Capacities to:5600m'/hr / Heads to: 78m
120
Atlas WG(H) pump quick selection chart
Capacity ( USgpm)
1,000 8000 1�0
"':'°'
100000 150000
110-t----f--t----++--+------+--+-t---+---+---+----+-+-+-+,
90 ---'--...l..._-......J_j__
10000 Capacity (I/ s)
Single stage, single suction, overhang shaft, centrifugal, single casing horizontal pump
• Material:
Wet Ends-Casing, Impeller, Plates are made of high-chrome alloy ,to resist wear, corrosion, impact or erosion.
• Bearing Assembly- Grease Lubrication and oil lubrication are optional depending on the usage.
• Seal options-Gland Seal, expeller( centrifugal or dynamic) seal and mechanical seal are optional to fit
different application.
• Part design:
Wet parts: wide internal passage allow large particle go through and reduce down time.
Impeller: wide passage and recessed vanes help to lower internal velocity to extend wear life.
Belt joint: Discharge could be any angle.
Excellent NPSH performance.
�o
""
340
"" 3l1
280
..
a' 240
1., � 160
140
12)
100
.,
,.
.,
2l
VC( R) Heavy Duty Sump Pump
VC( R) slurry pumps are designed for handling abrasive and
corrosive slurries whilst submerged in sumps or pit.
The pump has no shaft seal, easy to maintenance and cost
less.
Hard metal and rubber parts are optional for different
applications and interchangeable. Suit for most applications
where sump slurry pumps are needed.
Discharge size: 40N250mm / Capacities to:1089m'/hr / Heads to: 38m
'" 'r' 40
30
Atlas VC(R) pump quick selection chart
Capacity ( USgpm)
95�
mo 1550 2000 '"' 60�
-120
IOO
,<--+-+--+-+---60
/-t--+----+-+--+--+--20
Capacity (I/ s)
Single stage, single suction, overhang shaft, centrifugal, single casing vertical pump
• Material:
Wet Ends-Casings,lmpellers, liners are made of high-chrome alloy or rubber, to resist wear, corrosion,
impact or erosion, parts made of metal or rubber are interchangeable.
• Bearing Assembly- Grease Lubrication, easy to maintenance,
• Seal options-No shaft seal, free of shaft sealing problems.
• Part design:
Inlet-The bottom and top inlet design allow no priming required.
Screens- Reduce blockage rate.
Impeller-Double suction vanes reduce the axial load.
Suction pipe- could be fixed to draw away the high concentrated slurry deposited on the bottom of pit.
SPL High Head Heavy Duty Slurry Pump
SPL hard metal slurry pump are designed for highly
concentrated slurry and high head applications like
ash removal in powerplants and mining tailing.
Oil lubrication with water-cooling design makes the bearings
always working at lower temperature thus shaft could rotate
more rapidly to get high head, direct connected drive are always
optional by trimming impeller to appropriate diameter and to
get performance just in need, save the cost for variable-frequency
motor. Specially designed liners and impellers structure help pump
get higher efficiency and high head.
Discharge size: 40N300mm / Capacities to:2333m'/hr / Heads to: 128m
44
140
130
120
110
Atlas SPL pump quick selection chart
Capacity ( USgpm)
70 100 150 200 250 400 500 700 900 1300 1900 3000 4000 6000 9000 13000
450
420
390
360
10 ---..--+--+-330
90
80
70
60
50
40
30
20
10
300
270
240
210
180
150
120
90
60
30
10 15 20 25 30 40 50 60 80 100 150 200 300 400 600 800 1000 1400 2400 3000
Capacity ( m'/hr)
• Casing-Made of ductile Iron, ribs help casing to stand high pressure.
Wet Ends-Impellers, liners, volutes are made of high-chrome alloy to resist wear, corrosion,
shock or brush
• Special structure design to fit in high head applications where more than one pump in series are needed.
• High efficiency, lower power cost.
• Oil lubrication to lower bearing temperature, reduce down time.
• Impellers are designed to be trimmed multiple times to fit motor speed, coupling connection between
pump and motor help pump running more stable and reliable.
• lmpeller+packing seal and mechanical seal are optional, to reduce leakage risk.
• Could be used in sea water handling applications after special improvement.
• Could be used in series under 3.6MPa.
SPH High Head Medium Duty Slurry Pump
SPH hard metal slurry pumps are designed for low to medium
concentrated slurry and high head applications like ash removal
in powerplants and mining tailing. Oil lubrication with water-cooling
design makes the bearings always working at lower temperature
thus shaft could rotate more rapidly to get high head, direct
connected drive are always optional by trimming impeller to
appropriate diameter and to get performance just in need, save the
cost for variable-frequency motor. Specially designed liners and
impellers structure help pump get higher efficiency and high head.
Discharge size: 65�300mm / Capacities to:1920m'/hr / Heads to: 94m
Atlas SPH pump quick selection chart
Capacity ( USgpm)
44 70 100
110
100
90
I80
.., 70 .�
60
;§ 50
40
30
20
10
10 15 20 25 30 40 50 60 70 100 120 150 200 250 400 500 800 1000 1400
Capacity ( m3/hr)
• Casing-Made of ductile Iron, ribs help casing to stand high pressure.
Wet Ends-Impellers, liners, volutes are made of high-chrome alloy to resist wear, corrosion,
shock or brush
390
330
300
270
240
210
180
150
120
90
60
30
• Special structure design to fit in high head applications where more than one pump in series are needed.
• High efficiency, lower power cost.
• Oil lubrication to lower bearing temperature, reduce down time.
• Impellers are designed to be trimmed multiple times to fit motor speed, coupling connection between
pump and motor help pump running more stable and reliable.
• lmpeller+gland seal and mechanical seal are optional, to reduce leakage risk.
• Could be used in sea water handling applications after special improvement.
• Could be used in series under 3.6MPa.
� � m . C.
!
SPS Submerged Slurry Pump
Single stage, single suction, single casing, submerged over-hang shaft centrifugal slurry pump. suit for corrosive with solid particles applications like mining, power plant, metallurgical, coal; especially handle corrosive slurry with crystals.
Discharge size: 2s�2somm / Capacities to:1200m'/hr / Heads to: 28m
44
30
10
70 100
I
Atlas SPS pump quick selection chart
Capacity ( USgpm)
150 200 300 400 500 700
I I I I
1100 1600 2300
I
-4000 6000 9000 13000
-100
- 90
80
- 70
60
50
40
- 30
10 15 20 25 30 40 50 60 80 100120 ,so 200 250300 400 500600 8001000 1400 1800 24003000
Capacity ( m3/hr)
• Pump and motor are one-piece unit, impeller and motor share the same shaft, ensure stable operation. • No shaft seal needed, reduce down time. • The unit works under water, no primming needed. • No need for protection or fixing, could be moved to the right place conveniently. • Less noise and vibration. • Wet parts are made of high-chrome alloy to resist wear, corrosion, impact or erosion.
� � m . C.