7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
1/14
Ba
sicprinciple
Gr
undlagen
10.2012/BFK3-3 Sprengwirkungshemmung Blast resistance Ca1-3
Grundlagen Basic principles
In diesem Kompendium finden Sie Informationen zu sprengwirkungshemmenden Konstruktionen.Sollten Sie weitere Informationen zu diesen Konstruktionen bentigen, nehmen Sie Kontakt mitunseren Auendienstmitarbeitern auf.
These chapter contain information about blast-resistant constructions.
For more information about these constructions, contact your local sales representative.
Sicherer Schutz bei Explosion
Angesichts der gestiegenen Anzahl von Anschlgen weltweitwchst das Sicherheitsbedrfnis. Dazu zhlt neben demSchutz vor Beschuss auch der Schutz vor Sprengwirkung.Hier steigt der Bedarf an sprengwirkungshemmenden Fenstern,
Tren und Fassaden merklich an. Auch in diesem sensiblenMarktsegment bietet Schco mit perfekt abgestimmtenSystemen die optimale Sicherheit.
Reliable protection in the event of an explosion
In view of the rising number of attacks around the world, theneed for security is growing. In addition to protection against
bullets, this also includes protection against bomb blasts.
Here, the demand for blast-resistant windows, doors and
faades is growing markedly. In this sensitive market segment,
Schco also offers the optimum level of security with perfectly
a ore sys ems.
Normen und Richtlinien im berblickOverview of standards and guidelines
ISO 16933 Glas im Bauwesen Sprengwirkungshemmende Sicherheitsverglasung
Prfverfahren und Klassifizierung bei Arena-Freilandversuchenlass in building Explosion-resistant security glazing
Test and classification for arena air-blast loading
Vorschriften derUS-General Services Administration (GSA)
Regulations of the
US General Services Administration (GSA)
US-Bestimmungen fr dynamische berdruck-Lastprfungen frNormprfungen von Verglasungs- und Fenstersystemen
S specifications for dynamic overpressure load testing for standard
tests of glazing and window systems
as m auwesen c er e sson erverg asung r ver a ren un assen-einteilung des Widerstandes gegen Sprengwirkung
lass in building Security glazing Testing and classification of resistanceagainst explosion pressure
Sicherheitssonderverglasungen, Widerstand gegen EinbruchSpecial security glazing, resistance to break-in
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
2/14
Grundlagen
10.2012/BFK3-3Ca1-4 Sprengwirkungshemmung Blast resistance
Grundlagen Basic principles
Planungshinweiselanning information
Sprengwirkungshemmende Systeme unterliegen im Ernstfallextremen Bedingungen. Um den Anforderungen gerecht zuwerden ist eine frhzeitige Planung der Systeme im Gesamt-kontext erforderlich.
e r nac we s e en ewe s e n e es mm e ua on a .Objektbezogen sind die Bedingungen naturgem so individuell
wie die Projekte selbst. Beim Einsatz von sprengwirkungshem-men en ys emen s arum as p aner sc e ugenmer n cnur auf die Anforderungen und damit das definierte Schutzziel,sondern auch den Kontext, wie Gebudegeometrie oder die
nsc usss ua on, zu egen. o erne compu erges z eSimulationen und Berechnungen erlauben dabei die Korrelationder geprften Ergebnisse mit den individuellen Anforderungen
er ro e e.
ntsprechend spezialisierte Fachingenieure sollten gegebenen-alls bei der Planung bzw. der Definition der Anforderungen
einbezogen werden.
In an emergency, blast-resistant systems are subject to extreme
conditions. Therefore to satisfy
all requirements the glazing systems must be planned in their
overall context at an early stage.
e es repor s ep c spec c s ua ons w ereas eac
individual project has conditions that are
as unique as the project itself. When using blast-resistant
sys ems e ocus o pann ng s ou
not only be on the defined protection aim but also on areas
such as building geometry and attachment
me o s. o ern compu er-ass s e s m u a ons an
calculations allow the test results to be correlated
ith individual project requirements.
It is recommended, where necessary, that suitably qualified
specialist engineers should be involved during planning or
in defining requirements .
arame er zur es mmung er ys eman or erungenarameters for determining the system requirements
Bei Abweichung von den unterschiedlichen Normwerken sindgrundstzlich die folgenden Informationen zur Beurteilung der
Anforderungen notwendig. Nur mit diesen Angaben kann einspezialisierter Fachmann die Anforderungen an das Systemableiten.
If there is any deviation from the classifications specified in
the different standards, the following information is required to
assess the requirements. Only with these details is a specialist
able to deduce the requirements for the system.
aram er arame ers
Druck in kN/m oder psi Pressure in kN/m or psi
mpuls in kN/m*msec oder psi*msec Impulse in kN/m*msec or psi*msecLastdauer in msec Load duration in msec
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
3/14
Ba
sicprinciple
Grundlagen
10.2012/BFK3-3 Sprengwirkungshemmung Blast resistance Ca1-5
Grundlagen Basic principles
Sprengwirkungshemmende Sicherheitsverglasung nach ISO 16933Blast-resistant security glazing in accordance with ISO 16933
Die ISO 16933 befasst sich mit der Prfung von sprengwir-kungshemmenden Sicherheitsverglasungen. Sie beschreibtstrukturierte Verfahren um den Widerstand der Verglasunggegen Druckwellen zu bestimmen und sie dementsprechendin Klassen einzuordnen und legt die bentigte Vorrichtung, die
Ablufe, die Prfkrper und die Richtlinien zur Durchfhrung
von Freilandversuchen fest. Da sich die ISO 16933 auf eindefiniertes Fensterprfelement bezieht werden die dazu abwei-chenden Konstruktionen in Anlehnung an die Norm geprft.
ISO 16933 deals with the testing of blast-resistant security
glazing. It provides a structured procedure for determining
the resistance of glazing to shock waves and for assigning the
glazing to classes.
Additionally it specifies the required apparatus, procedures, test
specimens and guidelines for conducting arena air-blast tests.
hile ISO 16933 refers to a defined window test sample,glazed constructions which differ from this are also tested to
the standard.
15 m
19 m
25 m
ruckwelle im FreibereichShock wave in the open
rfmusterTest s ecimen
PrfdistanzTest distance
prengstoffExplosives
Freilandversuch nach ISO 16933Arena air-blast test in accordance with ISO 16933
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
4/14
Grundlagen
10.2012/BFK3-3Ca1-6 Sprengwirkungshemmung Blast resistance
Grundlagen Basic principles
lassifizierungClassification
pitzendruck der DruckwellePeak pressure of the shock wave
ositiver ImpulsPositive impulse
kPa] kPa.ms]XV45(X) 30 80
XV33(X) 50 250
XV25(X) 80 380
XV19(X) 40 600
XV15(X) 250 850XV12(X) 450 200
XV10(X) 800 600
(x) Beschreibt die Gefahrenstufe nach ISO 16933, wie nachfolgend beschrieben.(x) Describes the level of danger in accordance with ISO 16933, as described below.
Klassifizierungskriterien nach ISO 16933 lassification criteria in accordance with ISO 16933
e a rens u en nac azar eve s n accor ance w
EinstufungsgruppeClassification group
icherheitsstufeSecurity level
GefahrenstufeHazard level
eschreibungDescription
A icherSafe
Kein BruchNo breakage
The glazing is observed not to fracture and there is no visible damage to the glazing system.
B ehr hochery g
KeineGefhrdung
No risk
The glazing is observed to fracture but the inner, rear face leaf is fully retained in the facility test frame or glazingsystem frame with no breach and no material is lost from the interior surface. Outer leaves from the attack facemay e sacr ce an may a or e proecte out.
C ochHigh
MinimaleGefhrdung
n ma r s
The glazing is observed to fracture. Outer leaves from the attack face may be sacrificed and may fall or beprojected out. The inner, rear face leaf shall be substantially retained, with the total length of tears plus the totallength of pullout from the edge of the frame less than 50 % of the glazing sight perimeter.
so, t ere are no more t an t ree ratea e per oratons or n ents anyw ere n t e wtness pane an anyragments on t e oor etween m an m rom t e nter or ace o t e specmen ave a sum tota un temenson o mm or ess. azng ust an s vers are not accounte or n t e azar rat ng.
If by design intent there is more than 50 % pullout but the glazing remains firmly anchored by purpose-designedfittings, a rating of C (minimal hazard) may be awarded, provided that the other fragment limitations are met.The survival condition and anchoring provisions shall be described in the test report.
ocg
Sehr geringee r ung
Very low risk
The glazing is observed to fracture and significant parts are located no further than 1 m behind the originalocaton o t e rear ace. arts e pro ecte any stance rom t e attac ace towar s t e ast source.
so, t ere are no more t an t ree ratea e per oratons or n ents anyw ere n t e wtness pane, an anyfragments on the floor between 1 m and 3 m from the interior face of the specimen have a sum total uniteddimension of 250 mm or less. Glazing dust and slivers are not accounted for in the rating.
E ittelMedium
GeringeGefhrdung
Low risk
The glazing is observed to fracture, and glazing fragments or the whole of the glazing fall between 1 m and 3 mbehind the interior face of the specimen and not more than 0,5 m above the floor at the vertical witness panel.
Also, there are 10 or fewer rateable perforations in the area of the vertical witness panel higher than 0,5 m above
t e oor an none o t e per oratons penetrate more t an mm.F ering
LowHoheGefhrdung
g r s
Glazing is observed to fracture and there are more than 10 rateable perforations in the area of the verticalwitness panel higher than 0,5 m above the floor, or there are one or more perforations in the same witness panelarea with fragment penetration more than 12 mm.
1m3m
0,5m
Minimal risk (A, B and C)
ehr geringe Gefhrdung (D)Very low risk (D)
Geringe Gefhrdung (E)Low risk (E)
ohe Gefhrdung (F)High risk (F)
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
5/14
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
6/14
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
7/14
Ba
sicprinciple
Grundlagen
10.2012/BFK3-3 Sprengwirkungshemmung Blast resistance Ca1-9
Grundlagen Basic principles
Sprengwirkungshemmende Systeme in Anlehnung an ISO 16933Blast-resistant systems in accordance with the methods of ISO 16933
Max. zulssige Riegel- und Pfostenspannweite in Abhngigkeit vom Glasaufbau.Max. permissible transom and mullion span width dependent on glass composition.
lassifizierung in Anlehnungan ISO 16933
Classification in accordance with
the methods of ISO 16933
XV15(D)
ruck: (Prfwert)Pressure: (Test value)
250 kPa
mpuls: (Prfwert)Impulse: (Test value)
850 kPa. s
astdauer: (Prfwert)Load duration: (Test value)
6,8 ms
Verglasung:Glazing
AuenOutside
8 mm(ESG)(TSG)
ZRSBP
6 mm
nnenInside 5 mm
(VSG)(LSG)
Schco Fassade FW 80 XRSch co Faade FW 80 XR Fassadenelement 4-teilig
Prfzeugnis Nr. 740.02/01/FW 80 XR/S
Faade unit, 4-part
Test report no. 740.02/01/FW 80 XR/S
Prfergebnis Test result
SZR=Scheibenzwischenraum SBP = space between panes
Anwendungsbereich FW 80 XRArea of application FW 80+XR
iegelspannweite Transom span
0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0m
0,60,7
0,8
0,9
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,0
2,1
2,22,3
2,4
2,5
2,6
2,7
2,8
2,9
3,0
Pfostenspannweite
Mullionspan
mm ESG - 13,5 mm VSG8 mm TSG - 13,5 mm LSG
mm ESG - 15,04 mm VSG8 mm TSG - 15,04 mm LSG
mm ESG - 19,40 mm VSG8 mm TSG - 19,40 mm LSG
pezielle Glasaufbau erforderlichSpecial Glass Make-Up required
- -
iegelTransom 461 970
fostenMullion
443 470
iegelTransom
443 490
fostenMullion
443 470
inweis:
ie hier dargestellten Grentabellen sind Empfehlungen zur Vorbemessung und als Planungshilfen gedacht und basieren auf Berechnungen, nichtauf Prfergebnissen. Im Hinblick auf objektbezogenen Anforderungen und Gegebenheiten ist zu prfen, ob eine individuelle Beurteilung durch einen
achingenieur erforderlich ist.
Note:
The size tables illustrated here are intended as recommendations for preliminary calculations and as an aid to planning. They are based on
calculations, not test results. In terms of the project-specific requirements and conditions, it must be checked whether an individual assessment
is required by a specialist engineer.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
8/14
Grundlagen
10.2012/BFK3-3Ca1-10 | Sprengwirkungshemmung last resistance
Grundlagen Basic principles
iegelspannweite Transom span
m 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
0,6
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,81,9
2,0
2,1
2,2
2,3
2,4
2,5
2,6
2,7
2,8
2,9
3,0
mm ESG - 7,5 mm VSG8 mm TSG - 7,5 mm LSG
mm ESG - 11,5 mm VSG8 mm TSG - 11,5 mm LSG
mm ESG - 13,5 mm VSG8 mm TSG - 13,5 mm LSG
mm ESG - 15,04 mm VSG
8 mm TSG - 15,04 mm LSG
mm ESG - 19,40 mm VSG8 mm TSG - 19,40 mm LSG
FW 80 - ISO 16 933 - EXV25
Pfostenspannweite
Mullionspan
iegelTransom
461 970
fostenMullion
443 470
Schco Fassade FW 80+XRSch co Faade FW 80
iegelspannweite Transom span
m 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
0,6
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,0
2,1
2,2
2,3
2,4
2,5
2,6
2,7
2,8
2,9
3,0
mm ESG - 11,5 mm VSG8 mm TSG - 11,5 mm LSG
mm ESG - 13,5 mm VSG8 mm TSG - 13,5 mm LSG
mm ESG - 15,04 mm VSG8 mm TSG - 15,04 mm LSG
mm ESG - 19,40 mm VSG
8 mm TSG - 19,40 mm LSG
pezielle Glasaufbau erforderlichSpecial glass composition necessary
Pfostenspannweite
Mullionspan
iegelTransom
461 970
fostenMullion
443 470
FW 80 - ISO 16 933 - EXV19
Max. zulssige Riegel- und Pfostenspannweite in Abhngigkeit vom Glasaufbau.Max. permissible transom and mullion span width dependent on glass composition.
Anwendungsbereich FW 80 XRArea of application FW 80+XR
inweis:
ie hier dargestellten Grentabellen sind Empfehlungen zur Vorbemessung und als Planungshilfen gedacht und basieren auf Berechnungen, nichtuf Prfergebnissen. Im Hinblick auf objektbezogenen Anforderungen und Gegebenheiten ist zu prfen, ob eine individuelle Beurteilung durch einenachingenieur erforderlich ist.
Note:
The size tables illustrated here are intended as recommendations for preliminary calculations and as an aid to planning. They are based on
calculations, not test results. In terms of the project-specific requirements and conditions, it must be checked whether an individual assessment
is required by a specialist engineer.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
9/14
Ba
sicprinciple
Grundlagen
10.2012/BFK3-3 Sprengwirkungshemmung last resistance | Ca1-11
Grundlagen Basic principles
Sprengwirkungshemmende Systeme in Anlehnung an ISO 16933Blast-resistant systems in accordance with the methods of ISO 16933
Schco Fassade FW 60+XRSch co Faade FW 60 XR
Max. zulssige Riegel- und Pfostenspannweite in Abhngigkeit vom Glasaufbau.ax. perm ss e ransom an mu on span w epen en on g ass compos on.
lassifizierung in Anlehnungan ISO 16933
Classification in accordance with
the methods of ISO 16933
XV19(D)
ruck: (Prfwert)Pressure: (Test value)
69 kPa
mpuls: (Prfwert)Impulse: (Test value)
686 kPa. s
astdauer: (Prfwert)Load duration: (Test value)
9,89 ms
Verglasung:Glazing
AuenOutside
8 mm(ESG)(TSG)
ZRSBP
6 mm
nnenInside
1,5 mm(VSG)(LSG)
iegelspannweite Transom span iegelspannweite Transom span
m 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0
0,6
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,0
m 0 ,6 0, 7 0, 8 0 ,9 1, 0 1, 1 1 ,2 1, 3 1 , 4 1 ,5 1, 6 1 , 7 1 ,8 1, 9 2 , 0
0,6
0,7
0,8
0,9
1,0
1,1
1,2
1,3
1,4
1,5
1,6
1,7
1,8
1,9
2,0
mm ESG - 11,5 mm VSG8 mm TSG - 11,5 mm LSG
mm ESG - 13,5 mm VSG8 mm TSG - 13,5 mm LSG
mm ESG - 15,04 mm VSG8 mm TSG - 15,04 mm LSG
8 mm ESG - 7,5 mm VSG8 mm TSG - 7,5 mm LSG
8 mm ESG - 11,5 mm VSG8 mm TSG - 11,5 mm LSG
8 mm ESG - 13,5 mm VSG8 mm TSG - 13,5 mm LSG
Pfostenspannweite
Mullionspan
Pfostenspannweite
Mullionspa
n
FW 60+- ISO 16 933 - EXV19 FW 60 - ISO 16 933 - EXV25
iegelTransom
324 470
fostenMullion
324 040
iegelTransom
324 480
fostenMullion
324 050
assa ene emen - e gPrfzeugnis Nr. 740.02/02/FW 60 XR/S
Faade unit, 4-part
Test report no. 740.02/02/FW 60+XR/S
Prfergebnis Test result
SZR=Scheibenzwischenraum SBP = space between panes
Anwendungsbereich FW 60 XRArea of application FW 60+XR
inweis:
Die hier dargestellten Grentabellen sind Empfehlungen zur Vorbemessung und als Planungshilfen gedacht und basieren auf Berechnungen, nichtauf Prfergebnissen. Im Hinblick auf objektbezogenen Anforderungen und Gegebenheiten ist zu prfen, ob eine individuelle Beurteilung durch einen
achingenieur erforderlich ist.
Note:
The size tables illustrated here are intended as recommendations for preliminary calculations and as an aid to planning. They are based on
calculations, not test results.
In terms of the project-specific requirements and conditions, it must be checked whether an individual assessment is required by a specialist engineer.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
10/14
Grundlagen
10.2012/BFK3-3Ca1-12 | Sprengwirkungshemmung last resistance
Grundlagen Basic principles
Freilandversuch nach US-GSA VorschriftenArena testing in accordance with US-GSA regulations
ie nachfolgende Tabelle kann analog zur ISO 16933 als allgemeine Richtlinie zur Bestimmung von grundstzlichen Planungsan-orderungen fr explosionsdruckhemmende Fenster, Tren und Fassaden nach amerikanischer Vorschrift (US General Services
Administration) verwendet werden.
The table below can be used in the same way as ISO 16933 as a general guideline to determine fundamental planning requirements
for blast-resistant windows, doors and faades in accordance with American regulations (US General Services Administration).
Druckwellenparameter nach MasterspecShock wave parameters in accordance with Masterspec
ntfernungDistance
DruckPressure
mpulsImpulse
LastdauerLoad duration
ft] [m] psi] [kN/m] [psi *ms] kN/m] ms]
47,6 45 4,78 33,0 41,2 84,57 22,0
31,2 40 5,70 39,3 46,7 22,59 21,2
14,8 5 7,02 48,4 3,9 72,23 20,3
8,4 0 9,06 62,6 3,7 439,74 9,3
2,0 25 2,61 87,1 7,8 36,84 8,1
65,6 20 9,90 37,4 9,7 88,10 6,5
49,2 5 9,44 272,2 38,4 54,96 3,9
Gefahrenstufen nach GSA Hazard levels in accordance with GSA
Ausfhrungszustander ormance con t on
Schutzstuferotect on eve
Gefahrenstufeazar eve
esc re ungescrpt on
Sichera e
e neone
Verglasung zerbricht nicht. Keine sichtbaren Schden an Verglasung oder Rahmen.azng oes not rea . o v s e amage to t e g azng or rame.
2 Sehr hochVery high
KeineNone
Verglasung springt, wird aber durch den Rahmen gehalten. Staub oder sehr kleine Splitter bei Fensterbankoder Boden zulssig.
Glazing cracks, but is retained by the frame. Dusting or very small fragments near sill or on floor acceptable.
3a ochHigh
Sehr niedrigVery low
Verglasung springt. Splitter gelangen nicht weiter als 3,3 Fu vom Fenster in den Raum und nach drauen.Glazing cracks. Fragments enter space and land on floor no further than 3.3 ft. from the window.
3b ochHigh
NiedrigLow
Verglasung springt. Splitter gelangen nicht weiter als 10 Fu vom Fenster in den Raum und nach drauen.Glazing cracks. Fragments enter space and land on floor no further than 10 ft. from the window.
ttee um
ttee um
erg asung spr ngt. p tter geangen n en aum un nac rau en un a en usw r ungen au e nsen rec tes r ger t e e nem stan von c stens u vom enster enternt un e ner e vonmaximal 2 Fu ber Fuboden.
Glazing cracks. Fragments enter space and land on floor and impact a vertical witness panel at a distance ofno more than 10 ft. from the window at a height no greater than 2 fl. above the floor.
erngLow
ocHigh
erg asung spr ngt un enstersystem t n c t stan . p tter geangen n en aum un a enAuswirkungen auf ein senkrechtes Prfgert bei einem Abstand von hchstens 10 Fu vom Fensterentfernt und einer Hhe von maximal 2 Fu ber Fuboden.
Glazing cracks and the window system fails catastrophically. Fragments enter space impacting a verticalw tness pane at a d stance o no more t an t. rom t e w ndow at a e g t greater t an t. a ove t e oor.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
11/14
Ba
sicprinciple
Grundlagen
10.2012/BFK3-3 Sprengwirkungshemmung last resistance | Ca1-13
Grundlagen Basic principles
Sprengwirkungshemmende Systeme nach US-GSA VorschriftenBlast-resistant systems in accordance with US-GSA regulations
Fenster AWS 70.HIWindow AWS 70.HI
Klassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
A
Druck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)Impulse: (standard value)
7,8 psi. s
Lastdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
chco Protect XR 04 ISO
- g. - ens er m er c ern a s - gerfzeugnis BAM II.3/1573 /06 II A
Double-leaf turn/tilt window with toplights (turn/tilt window)Test certificate BAM II.3/1573 /06 II A
Klassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
A
Druck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)Impulse: (standard value)
7,8 psi. s
Lastdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
chco Protect XR 03 ISO
2-flg. DK-Fenster mit Oberlichtern als DK-Flgelrfzeugnis BAM II.3/1573 /06 III A
Double-leaf turn/tilt window with toplights (turn/tilt window)
Test certificate BAM II.3/1573 /06 III A
Klassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
A
Druck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)Impulse: (standard value)
7,8 psi. s
Lastdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
chco Protect XR 04 ISO
2-flg. DK-Fensterrfzeugnis BAM II.3/1573 /06 IV A
Double-leaf turn/tilt window
Test certificate BAM II.3/1573 /06 IV A
gekippttilted
rehstellungTurn position
eschlossenClosed
Alle hier dargestellten Elemente wurden mit den angegebenen Abmaen geprft. Abweichungen in Bezug auf Gren, Ausfhrungen, Wandanschlsse,ombinationen sind in jedem Einzelfall mit dem Auftraggeber rechtzeitig abzuklren.egebenfalls mssen gutachtliche Stellungnahmen oder ergnzende Prfungen durchgefhrt werden!
All the units shown here have been tested using the dimensions stated. Where different sizes, designs, wall attachments and combinations are required,
these must be agreed with the client in each individual case. It may be necessary to obtain approval documents or perform additional tests.
Geffnete Flgel durch Seilanbindung gesichertOpened vent secured by cable attachment
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
12/14
Grundlagen
10.2012/BFK3-3Ca1-14 | Sprengwirkungshemmung last resistance
Grundlagen Basic principles
Sprengwirkungshemmende Systeme nach US-GSA Vorschriftenlast-resistant systems in accordance with US-GSA regulations
ren Royal S 70DHoors Royal S 70DH
lassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
2
ruck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)Impulse: (standard value)
77,8 psi. s
astdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
Schco Protect P6B-ISO nach DIN EN 356Schco Protect P6B-ISO in accordance with DIN EN 356
re e men au en nen m g a s e en en egePrfzeugnis Nr. PML 2004-C063
Door unit, outward-opening with glass-dividing transomTest certificate No. PML 2004-C063
lassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
2
ruck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)
Impulse: (standard value)
77,8 psi. s
astdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
Schco Protect P6B-ISO nach DIN EN 356Schco Protect P7B-ISO nach DIN EN 356
Schco Protect P6B-ISO in accordance with DIN EN 356
Schco Protect P7B-ISO in accordance with DIN EN 356
Trelement auen ffnend mit glasteilenden RiegelGutachten BAM II.3/5057/04 III A
Door unit, outward-opening with glass-dividing transom
Certificate BAM II.3/5057/04 III A
Alle hier dargestellten Elemente wurden mit den angegebenen Abmaen geprft. Abweichungen in Bezug auf Gren, Ausfhrungen, Wandanschlsse,ombinationen sind in jedem Einzelfall mit dem Auftraggeber rechtzeitig abzuklren.egebenfalls mssen gutachtliche Stellungnahmen oder ergnzende Prfungen durchgefhrt werden!
All the units shown here have been tested using the dimensions stated. Where different sizes, designs, wall attachments and combinations are required,
these must be agreed with the client in each individual case. It may be necessary to obtain approval documents or perform additional tests.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
13/14
Ba
sicprinciple
Grundlagen
10.2012/BFK3-3 Sprengwirkungshemmung last resistance | Ca1-15
Grundlagen Basic principles
Schco Fassade FW 60+
Sch co Faade FW 60
lassifizierung gemS-GSA Vorschriften
Classification according to
U.S. GSA regulations
2it Verglasung P7B
With glazing P7B
Bit Verglasung P6B
With glazing P6B
ruck: (Normwert)Pressure: (standard value)
2,61 psi
mpuls: (Normwert)Impulse: (standard value)
7,8 psi. s
astdauer: (Normwert)Load duration: (standard value)
8,1 ms
Verglasung:Glazing
chco Protect P6B-ISO nach DIN EN 356
chco Protect P7B-ISO nach DIN EN 356Schco Protect P6B-ISO in accordance with DIN EN 356
Schco Protect P7B-ISO in accordance with DIN EN 356
assa ene emen m g as e en em egePrfzeugnis Nr. PML 2004-C063
Faade unit with glass-dividing transomTest certificate No. PML 2004-C063
Sprengwirkungshemmende Systeme nach US-GSA VorschriftenBlast-resistant systems in accordance with US-GSA regulations
Alle hier dargestellten Elemente wurden mit den angegebenen Abmaen geprft. Abweichungen in Bezug auf Gren, Ausfhrungen, Wandanschlsse,ombinationen sind in jedem Einzelfall mit dem Auftraggeber rechtzeitig abzuklren.egebenfalls mssen gutachtliche Stellungnahmen oder ergnzende Prfungen durchgefhrt werden!
All the units shown here have been tested using the dimensions stated. Where different sizes, designs, wall attachments and combinations are required,
these must be agreed with the client in each individual case. It may be necessary to obtain approval documents or perform additional tests.
7/25/2019 Auszug BKat Sprengwirkunghemmende Systeme Systemgrundlagen Und bersichten 2012-12
14/14
Grundlagen
Grundlagen Basic principles