268
BIBLIOGRAPHY
Abram, S. (1984), Development of Small Scale Industries in Bihar, Capital
Publishing House, New Delhi.
Abramovitz, M. (1956), “Resource and Output Trends in the U.S. since 1870”,
American Economic Review, Vol. 46, No. 2, pp. 5-23.
Acharya, S. and Nair, N.K. (1978), “Empirical Issues in Total productivity
Measurement: An Experiment with cement industry in India”, Productivity,
Vol. 19, No. 3, pp. 365-375.
Aggarwal, C. and Chandra, V. (1994), “Financing Small and Medium enterprises
in the Asia-Pacific Region”, Small Industry Bulletin for Asia and the
Pacific, United Nations, New York, No. 29, pp. 17-34.
Ahluwalia, I.J. (1985), Industrial Growth in India: Stagnation since Mid-Sixties,
Oxford University Press, New Delhi, India.
Ahluwalia, I.J. (1991), Productivity Growth in Indian Manufacturing, Oxford
University Press, New Delhi, India.
Aigner, D.J. and Chu, S.F. (1968), “On Estimating the Industry Production
Function”, American Economic Review, Vol. 58, No. 4, pp. 826-39.
Ali, A.I., and Seiford, L.M. (1993), The Mathematical Programming Approach to
Efficiency Analysis in H.O. Fried, C.A.K. Lovell & S.S. Schmidt (Eds.),
The Measurement of Productive Efficiency, New York: Oxford University
Press, pp. 120-159.
Anderson, D. (1982), “Small Industry in Developing Countries : A Discussion of
issues”, World Development, Vol. 10, No. 11, pp. 913-48.
269
Ark, B. Van (1996), Productivity and Competitiveness in Manufacturing: A
comparison of Europe, Japan and The United States, in Wagner, K. and B.
Van Ark (eds), International Productivity Differences, Elsevier Science
B.V., Amsterdam.
Arora, Nitin (2005), Economic Reforms and Total Factor Productivity in Indian
Manufacturing Sector, Unpublished M.Sc. (Hons. School) Economic,
Dissertation, Punjab School of Economics, Guru Nanak Dev University,
Amritsar.
Arora, V. (2009), Economic Reforms and Industrial Disparities in Indian
Manufacturing Sector, Unpublished Ph.D. Thesis, Faculty of Economics
and Business, Guru Nanak Dev University, Amritsar, Punjab, India.
Arun, M.G. (1999), “Modernising Indian Small Scale Enterprises”, The Industry
Magazine, Vol. 1, No. 9.
Arya, I.C. (1981), “On measuring Technological Change in Cement Industry in
India”, Artha Vijanana, Vol. 23, No. 2, pp. 167-75.
Arya, I.C. (1985), “Technology and Productivity of Cement Industry in India- A
Case Study of Fourteen Cement Companies”, Artha Vijanana, Sept., Vol.
25, No. 3, pp. 259-279.
Ashutosh, R. (2002), “Globalisation and After”, Economic and Political Weekly,
Vol. 37, Jan. 26-Feb.1, pp. 309-312.
Austria, M.S. and Martin, W. (1995), “Macroeconomic Instability and Growth in
Philippines, 1950-87: A Dynamic Approach”, The Singapore Economic
Review, Vol. 40, No. 1, pp. 65-81.
270
Avkiran, N.K. (1999), “An Application Reference for Data Envelopment Analysis
in Branch Banking: Helping the Novice Researcher”, International Journal
of Bank Marketing, Vol. 17, No. 5, pp. 206-220.
Avkiran, N.K. (2006), Productivity Analysis in the Services Sector with Data
Envelopment Analysis, 3rd
Edition, University of Queensland Business
School, The University of Queensland, Australia.
Awasthi, Dinesh (1991), Regional Patterns of Industrial Growth in India, Concept
Publishing Company, New Delhi, pp. 13-41.
Babu, V.G. and Vani, K.V. (1983), “Linear Estimation of the CES Function-
Indian Manufacturing Sector 1949-58 and 1959-66”, The Indian Economic
Journal, Oct-Dec. No. 2, pp. 91-95.
Bagchi, A.K. (1980), Private investment in India: 1900-1939, Orient Longman,
New Delhi.
Baghel, L.M.S. and Pendse, N.G. (1997), “An Econometric Analysis of
Productivity Growth and Technological Change in Total Manufacturing
Sector of India”, The Indian Economic Journal, Vol. 44, No. 2, pp. 39-58.
Bairam, E. (1990), “Aggregate and Disaggregate Production Function Estimates
for the Indian Economy using Annual Time Series and Cross Regional
Data”, The Indian Economic Journal, Vol. 38, No. 2, pp. 152-168.
Bala, N. (2007), Economic Reforms and Growth of Small Scale Industries, Deep
and Deep Publications, New Delhi.
Balakrishan, P. and Pushpangadan, K. (1994), “Total Factor Productivity Growth
in Manufacturing Industry: A Fresh look”, Economic and Political Weekly,
July 30, Vol. 229, pp. 2028-35.
271
Balasubrahmanya, M.H. (1997), “India’s Small Industry Development Strategy in
the 90s–A Review”, Sri Lankan Journal of Management, Vol. 2, April-
June, pp. 136-154.
Balasubrahmanya, M.H. (1999), “India Small Industry Policy in the 90s Waning
Protectionism”, The Indian Economic Journal, Vol. 47, No. 2, pp. 76-83.
Balasubramanya, M.H., Mathirajan, M. and Balachandra, P. (2002), “Research
and Development in Small Industry in Karnataka”, Economic and Political
Weekly, September 28-October 4, Vol. 37, No. 39, pp. 4010-17.
Balu, V. (1991), “Financing of Small Scale Industries: A Sample Study Including
Notified Backward Areas”, The Indian Journal of Economics, Vol. LXXII,
Part II, No. 285, pp. 258-289.
Banerjee, A. (1975), Capital Intensity and Productivity in Indian Industry,
Macmillan Company, New Delhi, India.
Banerjee, A., Dolado, J.J., Galbraith, J.W. and Hendry, D.F. (1993),
Cointegration, Error-Correction and the Econometric Analysis of Non-
Stationary Data, Oxford University Press, Oxford.
Banerjee, A. (1971), Capital Intensity and Productivity in Indian Industry, 1st
edition, Macmillan Company, New Delhi.
Banker, R.D., Charnes, A. and Cooper, W.W. (1984), “Some Models for
Estimating Technical and Scale Efficiencies in Data Envelopment
Analysis”, Management Science, Vol. 30, No. 9, pp. 1078-1092.
Bardi, Narayan Ratt and Madheswaran, S. (2004), Productivity Growth of Indian
Production Function and Technical efficiency, Econometric Society.
272
Barn, P.A. (1962), Political Economy of Growth, p.277, quoted by Reddy, K.C.
(1988), Sickness in Small Scale Industries, Ashish Publishing House : New
Delhi, p. 1.
Barro, R. (1991), “Economic Growth in a Cross-Section of Countries”, Quarterly
Journal of Economics, Vol. 106, No. 2, pp. 407-443.
Barro, R.J. and Sala-I-Martin, X. (1992) “Convergence,” Journal of Political
Economy, Vol. 100, No. 2, pp. 223-251.
Barro, R.J. and Sala-I-Martin, X. (1995), Economic Growth, New York: McGraw-
Hill.
Barthwal, R.R. (1975), “The Economics of Production Function : Some Empirical
tests for Indian Paper industry”, Southern Economic Review, Vol. 4, No. 3,
pp. 173-193.
Battese, G.E. and Coelli, T.J. (1992), “A Model for Technical Inefficiency Effects
in a Stochastic Production Function for Panel Data”, Empirical Economics,
Vol. 20. No. 1, pp. 325-332.
Bauer, P.W. (1990), “Recent Developments in the Econometric Estimation of the
Frontiers”, Journal of Econometrics, Vol. 46, No. 1-2, pp. 39-56.
Beri, C.C. (1962), Measurements of Production and Productivity in Indian
Industry, Asia Publishing House, New Delhi.
Bernard, A. and Durlauf, S. (1995), “Convergence of International Output”,
Journal of Applied Econometrics, Vol. 10, No. 2, pp. 97-108.
Bernard, A. and Durlauf, S. (1996), “Interpreting Tests of Convergence
Hypothesis”, Journal of Econometrics, Vol. 71, No. 1-2, pp. 161-174.
273
Berndt, E.R. and Fuss, M.A. (1989), Economic Capacity Utilization and
Productivity Measurement for Multiproduct Firms with Multiple Quasi-
Fixed Inputs, National Bureau of Economic Research Working Paper No.
2932. Cambridge, Mass : National Bureau of Economic Research.
Bhagwati, Jagdish (1961), “Industrial Capacity and Utilization: Need for a Sample
Survey of Manufacturing”, The Economic Weekly, Vol. 13, No. 27/29, pp.
1165-1168.
Bhanu, V. (2006), “Economic Reforms and Capacity Utilization in Indian
Industries”, Asian Economic Review, Vol. 48, No. 1, pp. 1-21.
Bose, A.N. (1964), Implications of Capacity Utilisation: A Study of the Calcutta
Metropolitan District, Sree Saraswaty Press, Calcutta.
Brahma, S. and Subas, P. (1979), Modern Small Scale Industry: A Wheel within a
Wheel, Shanker Brahma Samaj Publications, Pune.
Briscoe, G.P., Brien, P.O. and Symth, D.J. (1970), “The Measurement of Capacity
Utilization in United Kingdom”, The Manchester School of Economic and
Social Research, Vol. 38, No. 2. pp. 91-117.
Brumer, B. (2001), “Estimating Confidence Intervals for Technical Efficiency:
The Case of Private Farms in Slovenia”, European Review of Agricultural
Economics, Vol. 28, No. 3, pp. 285-306.
Bryce, D. Murray (1960), Industrial Development-A Guide for Accelerating
Economic Growth, McGraw Hill Book Co. New York.
Budhin, M. and Paul, S. (1961), “The Utilisation of Indian Industrial Capacity:
1949-59”, Indian Economic Journal, Vol. 9, No. 1, pp. 19-35.
274
Burange, L.G. (1992), “The trends in Capacity Utilisation in the Indian
Manufacturing Sector:1951-1986”, Journal of Indian School of Political
Economy, Vol. 4, No. 5, pp. 445-455.
Burange, L.G. (1993), “Implications of Full Capacity Utilisation of Manufacturing
Sector in Indian Economy”, Arthavijnana, Vol. 35, No. 2, pp. 160-181.
Caves, D.W., Christensen, L.R. and Diewert, E.W. (1982), “The Economic Theory
of Index Numbers and the Measurement of Input, Output and Productivity”,
Econometrica, Vol. 50, No. 6, pp. 1393-1414.
Chadha, V. (1995), “Technological Modernisation of Small Sector In India”,
Journal of Institute of Economic Research, Vol. 36, No. 3, October-
December. pp. 19-27.
Chadha, V. and Sandhu, P.S. (1987), “State Industrial Service Consultancy in
Punjab”, Journal of Institute of Economic Research, Vol. 22, No. 2, July.
pp. 23-35.
Chamberlin, E. (1947), The Theory of Monopolistic Competition, 5th
Edition,
Cambridge: Harvard University Press.
Chandra, K. (2004), Globalisation, Liberalisation, Privatisation and Indian
Policy, Isha Books, New Delhi.
Charnes, A., Cooper, W.W., Lewin, A.Y. and Seiford, L.M. (eds.) (1994), Data
Envelopment Analysis: Theory, Methodology and Applications, Kluwer
Academic Publishers, Boston, USA.
Charnes, A., Cooper, W.W. and Rhodes, E. (1978), “Measuring the Efficiency of
Decision Making Units”, European Journal of Operational Research, Vol.
2, No. 6, pp. 429-444.
275
Chartered Secretary (1997), Recommendation of Abid Hussian Committee on
Small Enterprises, March 1997.
Chatterji, S. (1997), “Banking on Effective Implementation”, The Economic
Times, 4th
August.
Chattopadhyay, S.K. (1995), Industrial Sickness in India, Sane Publications, New
Delhi.
Chattopadhyay, S.K. (2004), “Trends in Total Factor Productivity of
Manufacturing Sector in West Bengal: A Sectoral and Temporal Analysis”,
Reserve Bank of India Occasional Papers, Vol. 25, No. 1, 2 and 3,
Summer, Monsoon and Winter.
Chen, E.K.Y. (1976), “Factor Inputs, Total Factor Productivity and Economic
Growth: The Asian Case”, The Developing Economies, Vol. 15, No.1,
March, pp. 121-43.
Chen, Tser-Yieth and Tsai-Lien Yeh (1997), “A Study of Efficiency Evaluation in
Taiwan’s Banks”, International Journal of Service Industry Management,
Vol. 9, No. 5, pp. 402-415.
Chenery, H.B., (1960), “Pattern of Industrial Growth”, The American Economic
Review, Vol. 1, No. 4, Sept., p. 635.
Chhikara, M.S.(1996), “Development Finance for Small Scale Sector During
Economic Liberalization”, Abhigyan, Autumn, pp. 7-16.
Chittenden F, Hall G and Hutchinson P. (1996), “Small Firm Growth, Access to
Capital Markets and Financial Structure: Review of Issues and an Empirical
Investigation”, Small Business Economics, Vol. 8, pp. 59-67.
276
Chowdhary, A.H.M.N.(1990), “Small and Medium industries in Asian Developing
Countries”, Asian Development Review, Vol. 18, No. 2, pp. 143-64.
Clark, C. (1957), The Conditions of Economic Progress, The Macmillan and Co.
Ltd.: London.
Coelli, T. and S. Perelman, S. (1998), “A Comparison of Parametric and Non-
Parametric Distance Functions: With Application to European Railways”,
European Journal of Operational Research, Vol. 117, No. 2, pp. 326-339.
Coelli, T.J., Rao, D.S.P. (2001), An Introduction to Efficiency and Productivity
Analysis, 2nd
Edition, Kluwer, Boston.
Coelli, T., Rao, D.S.P., and Battese, G.E. (1998), An Introduction to Efficiency
and Productivity Analysis, Kluwer Academic Publishers, Boston, USA.
Coelli, T.J., Rao, D.S.P., O’Donnell, C. and Battese, G.E., (2005), An Introduction
to Efficiency and Productivity Analysis, 2nd
Edition, Kluwer, Boston.
Colman, David and Frederick Nixon (1986), Economics of Change in Less
Developed Countries, Philip Allan Publishers Ltd, Hertfordshire.
Cortes, M., Berry, A. and Ishaq, A. (1987), Success in Small and Medium Scale
Enterprises: The Evidence from Colombia, Johns Hopkins Press,
Baltimore, Maryland.
DCSSI (1992), Report on second All-India Census of Small Scale Industrial Units,
New Delhi.
DCSSI (2002), Small Scale Industries in India: An Engine of Growth, New Delhi.
277
DCSSI (2003), Quick Results Third All India Census of Small Scale Industries:
2001-02, New Delhi.
Debreu, G. (1951), “The Coefficient of Resources Utilization”, Econometrica,
Vol. 19, No. 3, pp. 273-92.
Desai, Vasant (2000), Dynamics of Entrepreneurial Development and
Management, Himalaya Publishing House, New Delhi.
Dunning, J.H. (1993), Multinational Enterprises and the Global Economy,
Addison-Wesley.
Eilon, S. (1981), Production Planning and Control, Bombay, Universal Book
Corporation.
Fan, S., Zhang, X. and Robinson, S. (1999), Past and Future Sources of Growth
for China, EPTD Discussion paper No. 53, International Food Policy
Research Institute, Washington, D.C.U.S.A.
Färe, R., Grosskopf, S. and Kokkelenberg, E.C. (1989), “Measuring Plant
Capacity, Utilisation and Technical Change: A Nonparametric Approach”,
International Economic Review, Vol. 30, No. 3, pp. 655-666.
Fare, R.S., Grosskopf, S., Norris, M. and Zhang, Z. (1994), “Productivity Growth,
Technical Progress and Efficiency Change in Industrialized Countries”,
American Economic Review, Vol. 84, No. 1, pp. 66-83.
Fare, Rolf, Grosskopf, Shawna and Lovell, C.A. (1994), Production Frontiers,
Cambridge University Press, Cambridge, U.K.
Farrell, M.J. (1957), “The Measurement of Productive Efficiency”, Journal of the
Royal Statistical Society, Series A, Vol. 120, No. 3, pp. 253-282.
278
Ferrantino, M.J., Ferrier, G.D. and Linvill, C.B. (1995), “Organisational Form of
Efficiency: Evidence from Indian Sugar Manufacturing”, Journal of
Comparative Economics, Vol. 21, No. 1, pp. 29-53.
FICCI (2004), FICCI Study on Bank Financing for the SSI Sector, New Delhi.
Gajanan, S.N. (1995), “Estimating Technical Inefficiency in Selected Indian
Manufacturing using Frontier Production Functions”, Indian Economic
Journal, Vol. 43, No. 2, pp. 97-120.
Gandhi, J.C. (1967), Marketing Management in the cotton Textile Industry of
Rajasthan, Unpublished Ph.D. Thesis, University of Jodhpur, Jodhpur.
Ganguly, N. (1988), “Small Scale Sector Problems and Prospects”, Yojana, Vol.
32, No. 4, pp. 25-48.
Ganpathy, K.G. (1986), The Curse of Sick Industries, Industrial Times, October-
November.
Ghobadian, A. and Gallear, D. (1996), “Total Quality Management in SMEs”,
Omega, Vol. 24, No. 1.
Gill, G. (1997), New Economic Policy and Indian Industrial Scenario,
Unpublished M.Sc. (Hons. School) in Economics Dissertation, Punjab
School of Economics, Guru Nanak Dev University, Amritsar, Punjab,
India.
Godwa, J.M. and Krishnamurty, M.G. (1997), “A SWOT Analysis: The Indian
Paper Industry”, Indian Management, June.
Goldar, B. (1983), “Productivity Trends in Indian manufacturing Industry: 1951-
1978”, Indian Economic Review, Vol. XVIII, No. 1, pp. 73-95.
279
Goldar, B.N. (1985), “Unit Size and Economic Efficiency: A Study of Small Scale
Washing Soap Industry in India”, Artha Vijnana, Vol. 27, No. 1, pp. 80-96.
Goldar, B.N. (1986), Productivity Growth in Indian Industry, Allied Publishers,
New Delhi.
Goldar, B. (1993), “Employment Growth in Modern Small Scale Industries in
India”, Journal of India School of Political Economy, Vol. V, No. 4, Table
5, p. 658.
Goldar, B. and Gupta, D.B. (1989), Industrialising India’s North-Eastern Region:
A Study of District Industry Centres, Institute of Economic Growth and
National Institute of Public Finance and Policy, New Delhi.
Goldar, B. and Kumari, A. (2003), “Import Liberalisation and Productivity
Growth in Indian Manufacturing Industries in the 1990s”, The Developing
Economies, Vol. XLI, No. 4, pp. 436-460.
Griliches, Z. (1966), “Production Functions in Manufacturing: Some Preliminary
Results”, in M. Browns, Theory and Empirical Analysis of Production
Studies in Income and Health, No. 31, National Bureau of Economic
Research, pp. 307.
Griliches, Z. and Jorgenson, D.W. (1966), “Sources of Measured Productivity
Change: Capital Input”, American Economic Association Papers, May
1966.
Grosskopf, S. (1993), “Statistical Inference and Nonparametric efficiency”,
Journal of Productivity Analysis, Vol. 7, No. 1, pp. 161-176.
Harrison, B. (1994), “The Small Firms Myth”, California Management Review,
November.
280
Hulten, Charles R. (1992), Total Factor Productivity: A short Biography, NBER,
Working Paper, p. 7471.
Huxtable, N. (1995), Small Business Total Quality, London, Chapman and Hall.
Jain, A.K. (1996), “Moulding mindsets in small scale industrial sector in New
Millennium”, Business Today, Vol. 5, No. 3, pp. 166-171.
Jain, Neelam (2004), “Small Scale Industries in the New Millennium”, SEDME,
Vol. 31, No. 1, pp. 63-72
Jain, O.P. (1980), “Export Consortia of Small Units”, SEDME, Vol. 7, No. 2, June,
pp. 105-116.
Jayadevan, C.M. (1995), “Inter-State Variations in Employment Growth Rates:
Evidences from Organised Industry in India”, Indian Journal of Regional
Science, Vol. XXVII, No. 1 & 2, pp. 41-56.
Jayasheela, and Hans, V.B. (2006), “Small Scale Industries in India: Present
Position and New Initiatives”, SEDME Journal, December, Vol. 33, No. 4,
pp. 11-20.
Jha, R. and Sahni, B.S. (1993), Industrial Efficiency: An Indian Perspective,
“Efficiency in the Indian Sugar Industry (Chapter 13)”, South Asia Books,
New Delhi, India.
Kambhampati, U.S. (2006), “Trade Reforms and the Efficiency of Firms in India”,
Oxford Development Studies, Vol. 31, No. 2, pp. 219-233.
Kendrick, J.W. (1961), “Productivity Trends in United States”, National Bureau of
Economic Research, New York.
281
Khan, L. (1985), “Small Scale Industries in India: Export Performance, Problems
and Prospects”, Indian Journal of Marketing, Vol. 15, No. 7, March.
Khan, M.A. (1983), “Industrial Sickness and Revitalization Through Banks”,
SEDME, Vol. 20, No. 1, March.
Khanka, S.S. (1985), “Development of Small Scale Industries in Assam”, Yojana,
Vol. 42, No. 9, pp. 10-25.
Kim and Lee (2005), “The Sources of Economic Growth of the East Asian Newly
Industrialised Countries”, Journal of Japanese and International
Economies, Vol. 8, pp. 124-156.
Koopmans, T.C. (1951), Activity Analysis of Production and Allocation, Cowles
commission for Research in Economics, Monograph No. 13, Wiley, New
York.
Kumar, Anita (2001), WTO and Indian Industry, (Mimeograph), Institute of
Economic Growth, New Delhi.
Kumar, P.S.M., Pillai, N.C. (1996) “Technical Efficiency in the Spinning Mills of
Kerala”, Productivity, Vol. 37, No. 1, p. 118.
Kumar, Rakesh (2002), “Efficiency and Technology Undercurrents in Indian
Textile Industry”, The Indian Economic Journal, Vol. 49, No. 2, December,
pp.73-81.
Kumar, S. (2001), Productivity and Factor Substitution: Theory and Analysis,
Deep and Deep Publications Pvt. Ltd., New Delhi.
282
Kumar, S. (2002), “Inter-Temporal and Inter-State Comparison of Total Factor
Productivity in Indian Manufacturing Sector: An Integrated Growth
Accounting Approach”, Artha Vijnana, Vol. 45, Nos. 3-4, pp. 161-184.
Kumar, S. and Arora, N. (2007a), “An evaluation of Technical Efficiency of
Indian Capital Goods Industries: A Non-parametric Frontier Approach”,
Productivity, Vol. 48, No. 2, pp. 182-197.
Kumar, S. and Arora, N. (2007b), “Technical and Scale Efficiency in Indian
Manufacturing Sector: A Cross-sectional Analysis Using Deterministic
Frontier Approach”, The Asian Economic Review, Vol. 49, No. 3, pp. 433-
458.
Kumar, S. and Arora, N. (2009), “Does Inspiration or Perspiration Drive Output
Growth in Manufacturing Sector?: An Experience of Indian States”, The
Indian Journal of Economics, Vol. LXXXIX, No. 355, pp. 569-598.
Kuznets, Simon (1969), Economic Growth and Structure-Selected Essays, Oxford
and IBH Publishing Company, New Delhi.
Lakdawala, D.T. and Sandesara, J.C. (1960), Small Industry in Big City - A Survey
in Bombay, University of Bombay Press, Bombay
Latha, K., Lavanya (2005), “Small Scale sector: A Nursery of Economic
Development”, SEDME, Vol. 32, No. 2, June, pp. 19-24.
League of Nations (1945), Industrialisation and Foreign Trade, Economic and
Financial Transit Department, Geneva, p. 10.
Lee, K., Pesaran, H.M. and Smith, R. (1996), Growth and Convergence; A Multi-
country Empirical Analysis of Solow Growth Model, ESRC Development
Economics Study Group, Annual Conference, University of Leicester.
283
Leibenstein, H. (1966), “Allocative Efficiency v/s X-Inefficiency”, American
Economic Review, Vol. 56, pp. 392-415.
Leung, Charles Ka-Yui (1998), “Convergence in Economic Growth”,
Departmental Working Papers _104, Chinese University of Hong Kong,
Department of Economics.
Levin, and L. M. Seiford (1997), Intensities: A DEA Framework. Ecological
Economics, Vol. 48, pp. 37-47.
Lichtenberg, F.R. (1994), Testing the Convergence Hypothesis, The Review of
Economics and Statistics, Vol. 76, No. 3, pp. 576-579.
Mahajan, V.S. (1980), “Small and Tiny Units Impact of Government Assistance”,
Economic Times, October, Bombay.
Mahambare, V. and Balasubramanyam, V.N. (2005), Trade Liberalisation and
Indian Manufacturing Sector, Cardiff Business School, Aberconway
Building Column Road, Cardiff CF 10 EU.
Martin, W. and Warr, G. (1990), The Declining Economic Importance of
Agriculture, invited paper to the 34th Annual Conference of the Australian
Agricultural Economic Society, Brisbane, Feb. 12-15.
McAdam, R. and McKeown, M. (1999), “Life After ISO9000: An Analysis of the
Impact of ISO9000 and Total Quality Management on Small Businesses in
Northern Ireland”, Quality Management, Vol. 10, No. 2.
Mehta, S.S. (1974), “Analysis of Sugar Industry-A Production Function
Approach”, Anvesak, Vol. 4, No. 2, pp. 197-205.
284
Mehta, S.S. (1980), Productivity, Production Function and Technical Change,
Concept Publishing Company, New Delhi.
Mishan, E.J. (1977), The Economic Growth–An Assessment, Allen and Unwin
Publishers Ltd.
Mishra, P. (2006), “Performance of Small Scale Manufacturing units in the Post-
Economic Reform with Special Reference to Factor Productivity: A study
of Five Industrial Clusters in Orissa”, Asian Economic Review, Vol. 48, No.
2, pp. 329-349.
Mitra, A. (1999) “Total Factor Productivity Growth and Technical Efficiency in
India Industries”, Economic and Political Weekly, Vol. 34, No. 31,p. M-98.
Mohan, V. M. (2001), “Capacity Utilisation Concepts and their Relevance to
Costs and Returns to Fruits and Vegetable Cold Stores”, Indian Journal of
Agriculture Economics, Vol. 36, No. 2, pp. 59-67.
Mohanty, A. and Kar, J. (1999), “Credit Rationing and SSI units”, Prajnan, April-
June Issue.
Mohanty, B. (1983), Economics of Small Scale Industries–A Case Study of
Cuttack District, Unpublished Ph.D. Thesis, Cuttack University,
Bhuvneshwar.
Morris, S., Basant, R., Das, K., Ramchandran, K. and Koshy, A. (2001), The
Growth and Transformation of Small Industries in India, Oxford University
Press, New Delhi.
Murty, M.N., Kumar, S. and Paul, M. (2006), Environmental Regulation,
Productive Efficiency and Cost of Pollution Abatement: A Case Study of the
285
Sugar Industry in India, Working Paper Number WP213, Institute of
Economic Growth, Delhi University Enclave, New Delhi.
Myrdal, G. (1956), An International Economy, Harper and Brothers : New York.
Mydral, G. (1958), Economic Theory and Underdeveloped Regions, Vora and Co.
Publishers, Bombay.
Myrdal, G. (1968), Asian Drama-An Enquiry in to the poverty of Nations, The
Penguin Press : London
Nadiri M., Ishaq (1970), “Some Approaches to the Theory and Measurement of
Total Factor Productivity : A Survey”, Journal of Economic Literature,
pp. 1137-77.
Narain, S. (1997), “SIDBI A Promotional cum Development Agency for SSIs”,
Laghu Udhyog Samachar.
Nath, H.K. (1996), Relative Efficiency of Small Scale Industries in India: An Inter-
State Comparison, M.Phil. Dissertation, Jawaharlal Nehru University, New
Delhi, India.
National Council of Applied Economic Research (1972), Under-Utilisation of
Industrial Capacity, New Delhi.
Nayar (1998), Globalisation: The Past in Our Present, in K. Das Dabendra, (ed.),
Indian Economy after 50 years of independence, Deep and Deep
Publication, New Delhi.
Nehru, J.L. (1958), Speeches- March 1953-August-1957, New Delhi, p. 11.
286
Nemedia (1997), “Globalisation: Historical Perspective”, CBN Economic and
Financial Review, Vol. 36, No. 4.
Neogi, C. and Ghosh, B. (1994) “International Efficiency Variations in India
Manufacturing Industries”, The Journal of Productivity Analysis, Vol. 5,
No. 3, pp. 301-24.
Neogi, C. and Ghosh, B. (1998), “Impact of Liberalization on performance of
Indian Industries: A firm level study”, Economic and Political Weekly, Vol.
33, No. 9, pp. M16-M24.
Nikaido, Y. (2004), “Technical Efficiency of Small Scale Industry; Application of
Stochastic Production Frontier Model”, Economic and Political Weekly,
Vol. 39, No. 6, pp. 592-597.
Norsworthy, J.R. and Jamg, S.L. (1992), Empirical Measurement and Analysis of
Productivity and Technological Change, Elsevier Science Publisher, North
Holland.
Olson, J.A., Schmidt, P. and Waldman, D.M. (1980), “A Monte Carlo Study of
Estimators of Stochastic Production Functions”, Journal of Econometrics,
Vol. 13, No. 1, Vol. 67-82.
Page, J.M. (1984), “Firm Size and Technical Efficiency: Applications of
Production Frontiers to Indian Survey Data”, Journal of Development
Economics, Vol. 16, September-October, pp. 129-152.
Panda, N.M. (1996), “New Small Enterprise Policy: Towards Strengthening Small
Sector to Face Economic Challenges”, in D Bhorali (ed.), Structural
Reform in India, Mittal Publications, New Delhi.
287
Papola, T.S. (1981), Impact of Concessional Finance on Industrial Development
of Backward Area, Best Publications, Lucknow (U.P.).
Parmeshwarn, K.P. (2002), “Some Basic Problems in the Way of Development of
Small Scale Ancillary Industries”, Productivity, Vol. 115, No. 1-2.
Pradhan, G. and Barik, K. (1999), “Total Factor Productivity Growth in
Developing Economies: A Study of Selected Industries in India”, Economic
and Political Weekly, Vol. 34, No. 31, pp. M92-M97.
Qommen, M.A. (1972), Small Industry in India’s Economic Growth - A Case
Study of Kerala, Research Publication in Social Sciences (Mimeograph),
Jawaharlal Nehru University, New Delhi.
Qommen, M.A. and Evenson, R. (1977), “Scale Economies, Elasticity of
Substitution and Productivity Change in the Agro-Based Industries in
India”, Asian Economic Review, Vol. 19, No. 1, pp. 10-23.
Raikhy, P.S. and Nanda, P. (2006), Impact of WTO Regime on Punjab Industry,
Guru Nanak Dev University Press, Amritsar.
Rajesh, R.S.N and Swamy, D. (2002), Economic Reforms Efficiency Change and
Productivity Growth: An Inter State Analysis of Indian Unorganised
Manufacturing Sector, Research Paper Department of Humanities and
Social Sector IIT, Chennai, India.
Ramakrishna, P. (1975), New Entrepreneurship in Small Scale Industry in Delhi,
Economic and Scientific Research Foundation, New Delhi.
Ramappa, B.T. and Basavaraja, M.G. (2006), “Impact of Liberalisation and
Globalisation on Small Scale Industries in India”, Southern Economist,
August 1, Vol. 45, No. 7, pp. 11-14.
288
Ramesha, K. (1999), “Bank Credit to Small Scale Industrial Sector: A study in
Inter-state Disparity”, Prajnan, Vol. 27, No. 3, April, pp. 49-57.
Rao, J.M. (1996), “Indices of Industrial Productivity Growth: Desegregation and
Interpretation” Economic and Political Weekly, 7th December, pp. 3177-
3188.
Ray, S. (2002), Economic Reforms and Efficiency of Firms: The Indian
Manufacturing Sector During the Nineties, Institute of Economic Growth,
University of Delhi Enclave, Delhi–110007, India.
Ray, S. (2004), “MNEs, Strategic Alliances and Efficiency of Firms: Emerging
Trends”, Economic and Political Weekly, Vol. 39, No. 5, pp. 434-440.
Ray, S.C. (1997), “Regional Variation in Productivity Growth in Indian
Manufacturing: A Nonparametric Analysis”, Journal of Quantitative
Economics, Vol. 13, No. 1 (January 1997), pp. 73-94.
Reddy, I.C.C. (1990), Financing of Small Scale Industries in India, Himalaya
Publishing House, New Delhi.
Reserve Bank of India (1992), A Report of the Committee to Examine the
Adequacy of Institutional Credit to the SSI Sector and Related Aspects,
Rural Planning and Credit Department, Mumbai.
Richmond, J. (1974) “Estimating the Efficiency of Production”, International
Economic Review, Vol. 15, No. 2, pp. 515-521.
Romer, G.D., Mankiw, N.G. and Weil, D. (1992), “A Contribution to the Empires
of Economic Growth”, Quarterly journal of Economic, Vol. 1, pp. 407-438.
289
Sahoo, K. Biresh (2008), “Decomposition of Total Factor Productivity Growth in
Nonparametric Framework: A Reconsideration”, Indian Journal of
Economics, Jan., Vol. LXXXVIII, No.3, pp. 493-521.
Sahoo, S.K. (2004), “Small Scale Manufacturing Industries in India”, The Indian
Economic Journal, Vol. 51, No. 2, April, pp. 52-58.
Sandesara, J.C. (1966), “Scale and Technology in Indian Industry”, Oxford
Bulletin of Economics and Statistics, Vol. 28, pp. 181-98.
Sandesara, J.C. (1982), Efficiency of Incentives for Small Industries, Industrial
Development Bank of India, Bombay.
Sandesara, J.C. (1988), “Small Industry Development Programmes in India-
Efficacy, Explanations, and Lessons: Some Field Studies”, In Suri,
K.B.(ed.), Small Scale Enterprises in Industries Development: The Indian
Experiences, Sage Publications, New Delhi.
Sandesara, J.C. (1988a), “Small Scale Industrialization- The Indian Experience”,
Economic and Political Weekly, 26th March.
Sandesara, J.C. (1991), “New Small Enterprises Policy: Implications and
Prospects” Economic and Political Weekly, 19th October.
Sandesara, J.C. (1993), “Modern Small-Scale Industry, 1972 and 1987-88:
Aspects of Growth and Structural Change”, Economic and Political
Weekly, February, pp. 223-229.
Sargent, T.C. and Rodriguez, A.R. (2000), “Labour or Total Factor Productivity:
Do We Need to Choose?”, International Productivity Monitor, Vol. 1, No.
1, pp. 41-44.
290
Seiford, L.M. and Thrall, R.M. (1990), “Recent Developments in DEA: The
Mathematical Programming Approach to Frontier Analysis”, Journal of
Econometrics, Vol. 46, No.1-2, pp. 7-38.
Selvam, M. (1996), “SWOT Perspectives of SSI”, Laghu Udhyog Samachar.
Sharma, R. and Diwan, P. (1994), Big Opportunities in the Small Scale Sector,
DCSSI, New Delhi.
Sharma, S. and Upadhyay, V. (2003-04), “An Analysis of Total Factor
Productivity in Indian Fertilizer Industry”, Indian Economic Journal, Vol.
51, No.1, pp. 89-105.
Sidhu, Hina (2007), “State Level Variations in Factor Productivity in the Indian
Industry”, Indian Journal of Regional Science, Vol. XXXIX, November 2,
pp. 1-19.
Singh, B. (1961), The Economics of Small Scale Industries–A Case Study of
Moradabad, Asia Publishing House, Delhi.
Singh, Kanwaljit (2002), Financing of Small Scale Industries in Punjab–An
Evaluation of the Role of Institutional Finance, Unpublished Ph.D. Thesis,
Panjab University, Chandigarh.
Singh, M.P. (1984), “Sharing of Productivity Gains in Indian Sugar Industry: An
Empirical Study”, Indian Journal of Industrial Relations, Vol. 20, No. 2,
pp. 222-230.
Singh, N.K. (1982), Industrial Progress and Economic Growth, Classical
Publishing Company, New Delhi, p.155.
291
Singh, N.P., Singh, P. and Pal, S. (2007), “Estimation of Economic Efficiency of
Sugar Industry in Uttar Pradesh: A Frontier Production Function
Approach”, Indian Journal of Agriculture Economics, Vol. 62, No. 2, pp.
232-243.
Singh, P. and Ajit, D. (1995), “Production Functions in the Manufacturing
Industries in India: 1974-90”, Reserve Bank of India Occasional Papers,
Vol. 16, No. 2, pp. 241-266.
Singh, P.N. (1964), “A Study off Productivity in Export Industry: Sugar in U.P.”,
Indian Journal of Labour Economics, Vol. 6, No. 4, pp. 353-359.
Singh, R.R. (1968), Productivity Trend and Wages, Eastern Economist, Vol. 4,
April.
Singh, S.P. (2006a), “Technical and Scale Efficiencies in the Indian Sugar Mills:
An Inter-State Comparison”, Asian Economic Review, Vol. 48, No. 1, pp.
87-99.
Singh, S.P. (2006b), “Efficiency Measurement of Sugar Mills in Uttar Pradesh”,
The ICFAI Journal of Industrial Economics, Vol. 3, No. 3, pp. 22-38.
Singh, S.P. (2007), Performance of Sugar Mills in Uttar Pradesh by Ownership,
Size and Location”, Prajnan, Vol. 35, No. 4, pp. 333-360.
Singh, S.P. and Agarwal, S. (2006), “Total Factor Productivity Growth, Technical
Progress and Efficiency Change in Sugar Industry of Uttar Pradesh”, The
Indian Economic Journal, Vol. 54, No. 2, pp. 59-82.
Singh, T. (2001), “Total Factor Productivity in the Manufacturing industries in
India”, The Indian Economic Journal, Vol. 48, No. 2, pp. 108-117.
292
Small Industries Development Bank of India (2000), “Report on Small Scale
Industrial Sector”, Thomson Press, Faridabad.
Smithies, A. (1957), “Economic Fluctuations and Growth”, Econometrica, Vol.
25, No. 1, pp. 1-52.
Solow, R.M. (1957), “Technical Change and Aggregate Production Function”,
Review of Economics and Statistics, Vol. 39, No. 3, pp. 312-320.
Subramanian, K.K. and Pillai, P. Mohanan (1994), “Liberalisation and Small
Industry-Need for Growth Strategy in Kerela”, Economic and Political
Weekly, Vol. XXIX, No. 33, pp. 23-44.
Subrahmaniyan, G. (1982), “Regional Efficiency in Indian Sugar Industry: A
Production Function Approach”, Margin, Vol. 14, No. 2, pp. 65-71.
Suresh, V. and Shashidhar, P. (2009), Competitiveness of Small Scale Industries of
India, Conference on Global Competition and Competitiveness of Indian
Corporate, Indian Institute of Management, Bangalore, pp. 439-452.
Sutcliffe, R.B. (1971), Industry and Under development, Addison-Wesley
Publishing Company: London.
Tendulkar, S.D. and Bhavani, T.K. (1997), “Policy on Modern Small Scale
Industries: A Case of Government Failure”, Indian Economic Review, Vol.
XXX, No. 21, pp. 88-105.
Thirlwall, A.P. (1999), Growth and Development, 6th Edition, The Mcmillan and
Co. Ltd. London.
Tinbergen, J. (1942), “ZurTheorie der Langfirstigen Wirtschaftsentwick Lung”,
Weltwirtsschaftliches Archiv, Vol. 55, No.1, pp 511-49; translated as “On
293
the Theory of Trend Movements”, in Klassen, L.H., Koych, L.M. and
Witteveen, H.J. (eds) (1959), Jan Tinbergen Selected Papers, Amsterdam,
North Holland, pp. 82-201.
Todaro, M.P. (1987), Economic Development in the Third World, 3rd Edition,
Orient Longman Ltd: New Delhi.
UNCTAD (1998), Handbook on Foreign Direct Investment by Small and Medium
Sized Enterprises, Lessons for Asia, Geneva.
UNIDO (1989), Environment Conductive to Sustained Growth of Small and
Medium Scale Enterprises, Discussion Paper ID/WG. 492/4 for the First
Consultation on Small and Medium Scale Enterprises including Co-
Operatives (Ban, Italy), Vienna, Robson G. & Gallagher C. (1993), “The
Job Creation Effects of Small and Large Firm interaction”, International
Small Business Journal, Vol. 12, pp. 23-37.
United Nations (1955), “Process and Problems of Industrialisation in
underdeveloped countries”, New York.
United Nations (1963), UN Committee for Industrial Development, Report of the
Third Session, 13th-31st May, e/3781,E/C, 5/37, New York.
Vasal, R. (1996), Small Scale Sector in India: An Economic Analysis Mimeo,
Unpublished Dissertation, University of Mumbai, Mumbai.
Vepa, Ram K. (1973), “Industrial Estates: A Tool for Development of Backward
Areas”, Asian Productivity, Vol. 7, No. 1, pp. 22-58.
Vepa, Ram K. (1988), Modern Small Industry in India: Problems and Prospects,
Sage Publications, New Delhi.
294
Vepa, Ram K. (1991), “Small Can be Beautiful: Recommendations for Small
Enterprises” Economic and Political Weekly, 5th July.
Vepa, Ram K. (1991), “Small Industry Comes to Age”, Financial Express, 25th
August.
Vidharbha Industries Association (1976), Financial and Credit Worthiness and
Indian Small Scale Sector: An Empirical Survey, Working Paper 20/1976,
Gujarat.
Wu, Y. (1997), Productivity and Efficiency: Evidence from the Chinese regional
Economies, Discussion Paper No. 97-18, Department of Economics,
University of Western Australia.
Yusuf, Shahid and Stiglitz, J.E. (2000), Development Issues: Settled and Open, In
Meier, G.M and Stiglitz, J.E. (eds.), Frontiers of Economic Development,
Oxford University Press, New York.
*********************