COMBINED
Interface: Learn the main interface of Revit, get familiar with the basic tools and also learn why BIM and Revit are the need of the hour.
Modify: How to perform operations on Revit Elements such as moving or copying.
Annotate: How dimentions are placed and how dimentional modelling is done in Revit.
View: How live views are created such as Front Side Top, Elevations, Sections etc, which are automatically modi�ed as changing take place in the project.
Families: Everything in Revit is based on Families, so when you want to create a new furniture, structural column, or a mechanical equipment, all of this is discussed in this class.
Collaboration: The very core of BIM, how disciplines coordinate and coworkers within a single discipline work togeth-er in Revit environment.
4D/5D BIM: Introduction to 4D BIM which is how to associate timeline with Revit Elements, and also 5D BIM, which is how to estimate the cost of the project.
ARCHITECTURE STRUCTURE
Walls/Assembly: How Walls and di�erent kinds of Architectural Elements are created.
Sketch Mode/Levels/Grids: How Sketching is done in Revit to create elements such as �oors, roofs etch and getting prepared for Revit Families. Also in this class, placement of Levels and Grids is discussed.
Floors/Roofs: How di�erent �oors and roofs are created.
Structure: How di�erent structural elements are placed in a projects.
Stairs: How di�erent types of stairs, ramps and railings are created.
Massing and Site: Learn how to handle topography in Revit.
STRUCTURE MEP
Collaboration: How �les of di�erent disciplines are linked and handled.
ARCHITECTURE
Curtain Wall: Di�erent types of curtain walls and their handling.Architectural Work�ow: How to develop an Architecture from scratch.Conceptual Modelling: How to conceptually design an Architec-ture.
STRUCTURE
Reinforcements: How to place reinforcements in Revit Structural Elements.Analysis: Introduction to Analytical Nodes, and Revit Extentions (Note: Overview only!)
MEP
HVAC: How Ducts, Duct Fittings and Mechanical Equipents are placed.
Plumbing: How di�erent Pipes, Pipe Fittings and plumbing �xture are placed.
Electrical: Place di�erent electrical equipments, conduits and conduit �ttings etc.
Analysis MEP: Electrical Load calculations, circuits, HVAC Heating and cooling loads linked to Revit Spaces.
Work�ow MEP: How Revit Archi-tectural/Structural models are placed to design the services.
OCLITS AUTODESK REVIT TRAINING ROADMAP
245/2-K, Block 6, PECHS, Karachi
+92-(213) 4536007-8
www.oclits.comAUTODESKAuthorized Training CenterCerti�cation CenterAcademic Partner
Recommended
