Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking
PropertiesCable structureTechnical dataBare copper, fine wire conductors, bunch
stranded to DIN VDE 0295 cl. 5, BS 6360
cl. 5 and IEC 60228 cl. 5
Special PVC control cables, adapted to
DIN VDE 0281 part 13
Extensively oil resistant, oil-/ chemical
Resistance - see table Technical
InformationsTemperature range
flexing -15 °C1) to +80 °C
fixed installation -40 °C to +80 °C
PVC self-extinguishing and flame retardant
according to VDE 0482-332-1-2, DIN EN
60332-1-2/ IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B)
Core insulation of special PVC Z 7225
Black cores with continuous white
numbering to DIN VDE 0293Nominal voltage U0/U 300/500 V
Green-yellow earth core in the outer layer
(3 cores and above)
Test voltage 4000 VThe materials used in manufacture are
cadmium-free and contain no silicone andBreakdown voltage min. 8000 V
Cores stranded in layers with optimal
lay-lengthInsulation resistance
min. 20 MOhm x km free from substances harmful to the
wetting properties of lacquersSpecial PVC inner sheathMutual capacitance according
to different cross-sections
0,5 mm² to 2,5 mm²:
core/core approx. 150 nF/km
core/screen approx. 270 nF/km
NoteTinned copper, braided screen, approx.
85% coverage
Transparent special PVC outer sheath G = with green-yellow earth core;
x = without green-yellow earth core (OZ).with meter marking, change-over in 2011
Coupling resistance
max. 250 Ohm/kmunscreened analogue type:
Minimum bending radius
flexing 10x cable ø
fixed installation 5x cable ø
Radiation resistance
up to 80x106 cJ/kg (up to 80 Mrad)1) cold bending test, impact resistance test
at low temperatures, elongation test at low
temperatures. Tested according VDE 0473
part 811-1-4, EN 60811-1-4
ApplicationFor use as a data and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening
ensures a high degree of interference protection. The screening density assures disturbancefree transmission of all signals and impulses.
The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical
view of the tinned copper braid.
EMC = Electromagnetic compatibillity
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no. AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
2067,041,07,12 x 0,516200 20740,0407,020,950 G 0,516219
20850,0520,022,461 G 0,5162202083,045,07,23 x 0,516169
2083,045,07,43 G 0,516201 201080,0690,025,280 G 0,516221
201350,0805,028,4100 G 0,5162222094,054,08,04 G 0,516202
2094,054,07,84 x 0,516170 1887,046,07,72 x 0,751622320108,066,08,55 G 0,516203 1898,057,08,03 G 0,751622420108,066,08,35 x 0,516171 1898,057,07,83 x 0,751617320125,073,09,36 G 0,516204 18113,063,08,54 G 0,751622520136,079,09,37 G 0,516205 18113,063,08,34 x 0,751619620136,079,09,57 x 0,517172 18130,076,09,35 G 0,751622620150,082,09,88 G 0,516206 18130,076,09,15 x 0,751617420170,0107,010,910 G 0,516207 18156,082,09,96 G 0,751622720195,0137,011,612 G 0,516208 18184,0100,010,17 G 0,751622820223,0142,012,414 G 0,516209 18184,0100,010,47 x 0,751617520250,0147,012,916 G 0,516210 18221,0112,010,68 G 0,751622920277,0156,013,518 G 0,516211 18270,0140,011,710 G 0,751623020310,0173,014,220 G 0,516212 18292,0175,012,712 G 0,751623120331,0189,014,221 G 0,516315 18315,0190,013,314 G 0,751623220390,0236,015,624 G 0,516213 18335,0204,014,116 G 0,751623320407,0250,015,625 G 0,516214 18358,0240,014,918 G 0,751623420520,0297,016,430 G 0,516215 18420,0262,015,420 G 0,751623520550,0312,017,132 G 0,516216 18454,0274,015,421 G 0,751631620585,0320,017,936 G 0,516217 18480,0291,017,324 G 0,751623620654,0345,018,440 G 0,516218 18508,0306,017,325 G 0,751623720671,0348,019,141 G 0,516453 18535,0326,017,727 G 0,7516238
18640,0340,018,530 G 0,7516239
Continuation
A 32
A
JZ-500, see page A 6
Y-CY-JZ flexible, CU-screened, transparent, EMC-preferred type, meter marking
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no. AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
18688,0349,019,132 G 0,7516240 16480,0294,015,814 G 1,516279
16525,0318,016,716 G 1,51628018730,0358,019,936 G 0,7516241
18950,0371,020,640 G 0,7516242 16640,0386,017,418 G 1,516281
16690,0401,018,520 G 1,51628218971,0403,021,241 G 0,7516454
181100,0470,023,250 G 0,7516243 16720,0447,018,521 G 1,516317
16770,0487,020,424 G 1,516283181290,0550,025,061 G 0,7516244
181510,0715,028,380 G 0,7516245 16805,0531,020,625 G 1,516284
16900,0562,021,628 G 1,516285181640,0910,031,6100 G 0,7516246
16950,0598,021,630 G 1,5162861797,054,08,02 x 116248161100,0685,023,235 G 1,51628717103,064,08,33 G 116249161350,0759,025,040 G 1,51628817103,064,08,23 x 116176161381,0840,025,041 G 1,51645617146,076,09,04 G 116250161675,0997,027,450 G 1,51628917146,076,08,94 x 116177161800,01120,029,261 G 1,51629017169,089,09,75 G 116251162300,01360,033,480 G 1,51629117169,089,09,55 x 116178162600,01690,037,6100 G 1,51629217199,0101,010,36 G 116252
14180,0110,010,12 x 2,51629317219,0114,010,57 G 116253
17219,0114,011,07 x 116179 14216,0148,010,83 G 2,516294
14267,0169,011,54 G 2,51629517270,0130,011,28 G 116254
17330,0156,012,510 G 116255 14347,0220,012,85 G 2,516296
14407,0284,014,17 G 2,51629717350,0186,013,312 G 116256
17400,0198,014,114 G 116257 14660,0369,016,410 G 2,516298
14722,0470,017,912 G 2,51631817422,0214,014,816 G 116258
17514,0284,015,618 G 116259 12302,0124,011,82 x 41629917545,0325,016,320 G 116260 12340,0178,012,53 G 41630017640,0366,018,224 G 116261 12410,0234,013,74 G 41630117689,0387,018,425 G 116262 12502,0284,015,05 G 41630217710,0421,019,228 G 116263 12638,0321,016,47 G 41630317762,0457,019,630 G 116264 10350,0176,013,72 x 61630417910,0500,020,934 G 116265 10450,0245,014,43 G 616305171070,0536,021,540 G 116266 10559,0316,015,74 G 616306171092,0578,022,241 G 116455 10702,0442,017,35 G 616307171315,0681,025,450 G 116267 10907,0530,019,07 G 616308171370,0710,026,161 G 116268 8500,0260,016,62 x 1016309171610,0940,029,880 G 116269 8750,0367,017,63 G 1016310171840,01180,034,2100 G 116270 81020,0549,019,44 G 101631116130,064,08,62 x 1,516271 81115,0604,021,35 G 101631216152,082,09,23 G 1,516272 81500,0820,023,67 G 101631316152,082,09,03 x 1,516180 61380,0807,023,44 G 161646016168,099,09,84 G 1,516273 61553,0940,026,05 G 161631416168,099,09,64 x 1,516181 41890,01169,028,34 G 251646116202,0123,010,85 G 1,516274 42270,01420,031,55 G 251646216202,0123,010,55 x 1,516182 22390,01680,032,44 G 351646316304,0148,011,77 G 1,516275 22885,02020,036,55 G 351646416304,0148,012,17 x 1,516183 13315,02370,038,64 G 501646516336,0172,012,68 G 1,516276 14150,02880,043,05 G 501615716420,0198,013,810 G 1,516277 2/04600,03257,046,14 G 701646616434,0274,014,912 G 1,516278 2/05750,04032,050,95 G 7016158
3/06060,04060,051,14 G 9516467
3/07580,05244,056,05 G 9516159
4/07315,05231,056,54 G 12016468
4/09150,06624,062,15 G 12016160
300 kcmil9680,07760,064,64 G 15016167
300 kcmil10170,08496,070,65 G 15016168
Dimensions and specifications may be changed without prior notice. (RA01)
A 33
Y-CY-JB flexible, CU-screened, transparent, EMC-preferred type, meter marking
PropertiesCable structureTechnical dataBare copper, fine wire conductors, bunch
stranded to DIN VDE 0295 cl. 5, BS 6360
cl. 5 and IEC 60228 cl. 5
Special PVC control cable in accordance to
E DIN VDE 0281 part 13
Extensively oil resistant, oil-/ chemical
Resistance - see table Technical
InformationsTemperature range
flexing -15 °C1) to +80 °C
fixed installation -40 °C to +80 °C
PVC self-extinguishing and flame retardant
according to VDE 0482-332-1-2, DIN EN
60332-1-2/ IEC 60332-1 (equivalent
DIN VDE 0472 part 804 test method B)
Core insulation of special PVC Z 7225
Core colour coded to JB/OB colour codeNominal voltage
U0/U 300/500 V to 1,5 mm²
U0/U 450/750 V at 2,5 mm²
Green-yellow earth core in the outer layer
(3 cores and above)The materials used in manufacture are
cadmium-free and contain no silicone andCores stranded in layers with optimal
lay-lengthTest voltage 4000 V
free from substances harmful to the
wetting properties of lacquersBreakdown voltage min. 8000 V Special PVC inner sheath
Insulation resistance
min. 20 MOhm x km
Tinned copper, braided screen, approx.
85% coverage
NoteMutual capacitance according to
different cross-sections
0,5 mm² to 2,5 mm²:
core/core approx. 150 nF/km
core/screen approx. 270 nF/km
Transparent special PVC outer sheath
with meter marking, change-over in 2011 G = with green-yellow earth core;
x = without green-yellow earth core (OB).
by 5 cores with VDE-Reg. No.
AWG sizes are approximate equivalent
values. The actual cross-section is in mm².Coupling resistance
max. 250 Ohm/km unscreened analogue type:Minimum bending radius
flexing 10x cable ø
fixed installation 5x cable ø
Radiation resistance
up to 80x106 cJ/kg (up to 80 Mrad)1) cold bending test, impact resistance test
at low temperatures, elongation test at low
temperatures. Tested according VDE 0473
part 811-1-4, EN 60811-1-4
ApplicationFor use as a data and control cable in machinery, computer systems etc. as well as a signal cable for electronics. The high level of screening
ensures a high degree of interference protection. The screening density assures disturbance-free transmission of all signals and impulses.
The PVC-inner sheaths of those cables raise the mechanical stress. The applied clear transparent PVC outer sheath accentuates the optical
view of the tinned copper braid. These cables are suitable for flexible use for medium mechanical stresses with free movements.
The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above
application.
EMC = Electromagnetic compatibillity
To optimise the EMC features we recommend a large round contact of the copper braiding on both ends.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no. AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
2067,041,07,12 x 0,516121 14180,0110,011,32 x 2,516137
14216,0148,011,83 G 2,5161382083,045,07,43 G 0,516122
2094,054,08,04 G 0,516123 14267,0169,012,74 G 2,516139
14347,0220,014,15 G 2,51614020108,066,08,55 G 0,516124
12302,0124,013,42 x 4161411887,046,07,72 x 0,7516125
1898,057,08,03 G 0,7516126 12340,0178,014,23 G 416142
12410,0234,015,34 G 41614318113,063,08,54 G 0,7516127
18130,076,09,35 G 0,7516128 12502,0284,016,85 G 416144
1797,054,08,02 x 116129 10350,0176,014,72 x 616145
10450,0245,015,43 G 61614617103,064,08,33 G 116130
17146,076,09,04 G 116131 10559,0316,016,84 G 616147
10702,0442,018,65 G 61614817169,089,09,75 G 116132
8500,0260,018,02 x 101614916130,064,08,62 x 1,516133
16152,082,09,23 G 1,516134 8750,0367,019,13 G 1016150
81020,0549,021,14 G 101615116168,099,09,84 G 1,516135
16202,0123,010,85 G 1,516136 81115,0604,023,35 G 1016152
Continuation
A 38
A
JB-500, see page A 21
JB-750, s A 22ee page
Y-CY-JB flexible, CU-screened, transparent, EMC-preferred type, meter marking
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no. AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Outer Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
61380,0807,025,34 G 1616153 13315,02370,040,24 G 5016471
14150,02880,044,85 G 501611961553,0940,028,25 G 1616154
2/04600,03257,045,94 G 701647241890,01169,031,24 G 2516469
42270,01420,034,55 G 2516155 3/06060,04060,051,34 G 9516473
22390,01680,033,84 G 3516470 4/07315,05231,056,54 G 1201647422885,02020,037,55 G 3516156 300 kcmil9340,07760,064,64 G 15016247
350 kcmil11120,08104,067,44 G 18516319
Dimensions and specifications may be changed without prior notice. (RA01)
A 39
Conduits
Corrugated tubes for standard applications for lager sizes scissile corrugated tubes conduit glandsHigh fl exible conduits plastic conduits with spiral spring metal conduits conduits glandsConduit for heavy mechanical duty metal conduits with plastic sheat plastic conduits conduits glands for metal conduits
You can fi nd conduits in our catalogue Cable Accessories.Request it now at www.helukabel.de
TOPFLEX® -EMV-2YSLCY-J for power supply connections to frequency
converters, double screened, 0,6/1kV, meter marking
PropertiesCable structureTechnical dataBare copper, fine wire conductor toDIN VDE 0295 cl. 5, BS 6360 cl. 5 orIEC 60228 cl. 5
Special motor power supply cable forfrequency converters adapted toDIN VDE 0250
Behavior in fire: Test according toVDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (equivalent DIN VDE 0472part 804 test method B)Temperature range
flexing +5 °C to +70 °Cfixed installation -40 °C to +70 °C
Polyethylene (PE) core insulationLow mutual capacitance, to DIN VDE 0472part 504, test method B
Core colours: green-yellow, brown, black,grey
Features PE-insulation secures a lowerdielectric loss, double potential strength,
Nominal voltage U0/U 600/1000 V Cores stranded in concentric layers
A.C. and 3-phase 700/1200 VDC operation 900/1800 V
1. screening with special aluminum foilhigh longevity and low screen-interferencecurrents
2. screening with copper braiding, tinnedcopper, coverage approx. 80%
Installation in hazardous areasTest voltage 2500 V Transparent special PVC outer sheathLow mutual capacitanceInsulation resistance
min. 200 MOhm x kmwith meter marking, change-over in 2011
Meets EMC requirements according toEN 55011 and DIN VDE 0875 part 11Coupling resistance
according to different cross-sectionsmax. 250 Ohm/km
Low coupling resistance for highelectromagnetic compatibility
NoteG = with green-yellow earth core.
This screened motor supply cable with lowmutual capacitance of the single cores
Mutual capacitance
according to different cross-sectionscore/core 70 to 250 nF/kmcore/screen 110 to 410 nF/km
The current carrying capacity forpermanent operation at ambienttemperature of30 °C. For deviating ambient temperaturesthe conversion factors should be used and
because of the special PE core insulationand low screen capacitance enable alow-loss transmission of the powercompared to PVC-sheathed connectingcables
Minimum bending radius
fixed installation for outer ø:up to 12 mm: approx. 5x cable ø>12 to 20 mm: approx. 7,5x cable ø>20 mm: approx. 10x cable øfree-movement for outerø:up to 12 mm: approx. 10x cable ø>12 to 20 mm: approx. 15x cable ø>20 mm: approx. 20x cable ø
for further see the indication inDIN VDE 0298 part 4
Due to the optimal screening aninterference-free operation of frequencyconverters is obtainedThe materials used in manufacture arecadmium-free and contain no silicone andfree from substances harmful to thewetting properties of lacquersRadiation-resistance
up to 80x106 cJ/kg (up to 80 Mrad)
ApplicationThis TOPFLEX®-EMV-2YSLCY-J motor power supply cable for the frequency converters assures electromagnetic compatibility in plants andbuildings, facilities with units and operating equipment where the fields of electromagnetic interference might cause adverse effects onthe surroundings. As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry,moist and wet environments, not however for outdoor applications. Used in the automotive and food industries, environmental technology,packaging industry, machine tools.Handling equipment, for SIMOVERT drives, they are particularly suitable for use with industrial pumps, ventilators, conveyor belts andair-conditioning installations and similar applications.EMC = Electromagnetic compatibilityThe screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with thefunctional interference requirements of EN 55011.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceMutual capacitanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
Core / Screen
approx. nF /
km
Core / Core
approx. nF /
km
16230,095,0181107010,34 G 1,52208414300,0150,026210181308012,34 G 2,52208512485,0235,034210111509013,94 G 42208610633,0320,04415061509015,34 G 622087
Continuation
D 17
Max. operating voltage
TOPFLEX® -EMV-2YSLCY-J for power supply connections to frequency
converters, double screened, 0,6/1kV, meter marking
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceMutual capacitanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
Core / Screen
approx. nF /
km
Core / Core
approx. nF /
km
8863,0533,061180720012019,54 G 102208861291,0789,082190923014023,34 G 162208941862,01236,010895421012027,44 G 252209022611,01662,013585326015030,34 G 352209112955,02345,016840232019035,54 G 5022092
2/03953,03196,020745232019040,24 G 70220933/05304,04316,025050141025044,54 G 95220944/06604,05435,029250,34 G 12022095
300 kcmil7043,06394,033556,14 G 15022096350 kcmil8384,07639,038258,04 G 18522097
Dimensions and specifications may be changed without prior notice. (RD01)
D 18
D
Large cabling machine with backtwist at our Windsbach factory.
TOPFLEX® -EMV-UV-2YSLCYK-J for power supply connections
to frequency converters, double screened, 0,6/1kV, meter marking
PropertiesCable structureTechnical dataBare copper, fine wire conductor toDIN VDE 0295 cl. 5, BS 6360 cl. 5 orIEC 60228 cl. 5
Special motor power supply cable forfrequency converters adapted toDIN VDE 0250
Behavior in fire: Test according toVDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (equivalent DIN VDE 0472part 804 test method B)Temperature range
flexing -5 °C to +70 °Cfixed installation -40 °C to +70 °C
Polyethylene (PE) core insulationLow mutual capacitance, to DIN VDE 0472part 504, test method B
Core colours: green-yellow, brown, black,grey
Features PE-insulation secures a lowerdielectric loss, double potential strength,
Nominal voltage U0/U 600/1000 V Cores stranded in concentric layersMax. operating voltage
A.C. and 3-phase 700/1200 VDC operation 900/1800 V
1. screening with special aluminium filmhigh longevity and low screen-interferencecurrents
2. screening with copper braiding, tinnedcopper, coverage approx. 80%
Low mutual capacitanceTest voltage 2500 V Special PVC outer sheath, black (RAL 9005)Meets EMC requirements according toEN 55011 and DIN VDE 0875 part 11
Insulation resistance
min. 200 MOhm x kmwith meter marking, change-over in 2011
Low coupling resistance for highelectromagnetic compatibility
Coupling resistance
according to different cross-sectionsmax. 250 Ohm/km
NoteThe current carrying capacity for permanentoperation at ambient temperature of30 °C. For deviating ambient temperaturesthe conversion factors should be used and
UV-resitantOutdoor application, possible forinstallation in underground at 4G16mm²
Mutual capacitance
according to different cross-sectionscore/core 70 to 250 nF/kmcore/screen 110 to 410 nF/km
This screened motor supply cable with lowmutual capacitance of the single coresbecause of the special PE core insulation
for further see the indication in DIN VDE 0298part 4Minimum bending radius
fixed installation for outer ø:up to 12 mm: approx. 5x cable ø>12 to 20 mm: approx. 7,5x cable ø>20 mm: approx. 10x cable øfree-movement for outer ø:up to 12 mm: approx. 10x cable ø>12 to 20 mm: approx. 15x cable ø>20 mm: approx. 20x cable ø
and low screen capacitance enable alow-loss transmission of the powercompared to PVC-sheathed connectingcablesDue to the optimal screening aninterference-free operation of frequencyconverters is obtainedThe materials used in manufacture arecadmium-free and contain no silicone andRadiation-resistance
up to 80x106 cJ/kg (up to 80 Mrad) free from substances harmful to thewetting properties of lacquers
ApplicationThis TOPFLEX®-EMC-2YSLCYK-J motor power supply cable for the frequency converters assures electromagnetic compatibility in plants andbuildings, facilities with units and operating equipment where the fields of electromagnetic interference might cause adverse effects onthe surroundings. As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry,moist and wet environments and for outdoor applications, possible for installation in underground at 4G16 mm². Used in the automotiveand food industries, environmental technology, packaging industry, machine tools. Handling equipment, for SIMOVERT drives, they areparticularly suitable for use with industrial pumps, ventilators, conveyor belts and air-conditioning installations and similar applications.Installation in hazardous areas.EMC = Electromagnetic compatibilityThe screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with thefunctional interference requirements of EN 55011.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceMutual capacitanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
Core / Screen
approx. nF /
km
Core / Core
approx. nF /
km
16230,095,0181107010,34 G 1,52223414300,0150,026210181308012,34 G 2,52223512485,0235,034210111509013,94 G 42223610630,0320,04415061509015,34 G 622237
8860,0533,061180720012019,54 G 102223861290,0789,082190923014023,34 G 1622239
Continuation
D 19
TOPFLEX® -EMV-UV-2YSLCYK-J for power supply connections
to frequency converters, double screened, 0,6/1kV, meter marking
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceMutual capacitanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
Core / Screen
approx. nF /
km
Core / Core
approx. nF /
km
41860,01236,010895421012027,44 G 252224022610,01662,013585326015030,34 G 352224112950,02345,016840232019035,54 G 5022242
2/03950,03196,020745232019040,24 G 70222433/05300,04316,025050141025044,54 G 95222444/06600,05435,029250,34 G 12022245
300 kcmil7040,06394,033556,14 G 15022246350 kcmil8380,07639,038258,04 G 18522247
Dimensions and specifications may be changed without prior notice. (RD01)
D 20
D
Tools
Cable shearsBox spannersStrippersCrimping toolsPliersSkinning knife
You can fi nd tools in our catalogue Cable Accessories.Request it now at www.helukabel.de
TOPFLEX®-EMV-3 PLUS 2YSLCY-J for power supply connections
to frequency converters, double screened, 0,6/1kV, meter marking
PropertiesCable structureTechnical dataPlain copper, fine wire conductor accordingto DIN VDE 0295 cl. 5, BS 6360 cl. 5 and/orIEC 60228 cl. 5
Special motor power supply cable forfrequency converters adapted toDIN VDE 0250
Behavior in fire: Test according toVDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (equivalent DIN VDE 0472part 804 test method B)Temperature range
flexing +5 °C to +70 °Cfixed installation -40 °C to +70 °C
Polyethylene (PE) core insulationPE-insulation secures a lower dielectric loss,double potential strength, high longevityand low screen-interference currents
Core colours: black, brown, grey,green-yellow (earth core divided into 3)
Nominal voltage U0/U 600/1000 V 3+3-core structureApplication in ex-areaMax. operating voltage
A.C. and 3-phase 700/1200 VDC operation 900/1800 V
Cores stranded in concentric layersLow mutual capacitance1. screening with special aluminium filmMeets EMC requirements according toEN 55011 and DIN VDE 0875 part 11
2. screening with copper braiding, tinnedcopper, coverage approx. 80%Peak value Û 1700 V
Low coupling resistance for highelectromagnetic compatibility
Test voltage 2500 V Transparent special PVC outer sheath
min. 200 MOhm x kmwith meter marking, change-over in 2011
The materials used in manufacture arecadmium-free and contain no silicone and
Pos.no. 22380 = capacitancecore/core 270 nF/kmcore/screen 520 nF/km
Coupling resistance
according to different cross-sectionsmax. 250 Ohm/km
free from substances harmful to thewetting properties of lacquersThe screen must be connected at bothends and ensure lare-area contact over the
Minimum bending radius
fixed installation for outer ø:up to 12 mm: approx. 5x cable ø>12 to 20 mm: approx. 7,5x cable ø>20 mm: approx. 10x cable øfree-movement for outer ø:up to 12 mm: approx. 10x cable ø>12 to 20 mm: approx. 15x cable ø>20 mm: approx. 20x cable ø
NoteThe current carrying capacity for permanentoperation at ambient temperature of30 °C. For deviating ambient temperaturesthe conversion factors should be used andfor further see the indication in DIN VDE 0298part 4
entire cable circumference for compliancewith the functional interferencerequirements of EN 55011The minimum cross-section of 0,75² meetsthe requirements of DIN EN 60204 part 1
Radiation-resistance
up to 80x106 cJ/kg (up to 80 Mrad)
ApplicationAs a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wetenvironments and for outdoor applications. Used in the automotive and food industries, environmental technology, packaging industry,machine tools. Handling equipment, for SIMOVERT drives, they are particularly suitable for use with industrial pumps, ventilators, conveyorbelts and air-conditioning installations and similar applications. Installation in hazardous areasThis screened motor supply cable with low mutual capacitance of the single cores because of the special PE core insulation and low screencapacitance enable a low-loss transmission of the power compared to PVC-sheathed connecting cables.Due to the optimal screening an interference-free operation of frequency converters is obtained.EMC = Electromagnetic compatibilityThe screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with thefunctional interference requirements of EN 55011.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
16140,086,0189,93 x 1,5 + 3 G 0,252236814220,0144,0262101811,33 x 2,5 + 3 G 0,52236912323,0224,0342101113,03 x 4 + 3 G 0,752237010420,0298,044150614,93 x 6 + 3 G 1,0223718615,0491,061180718,43 x 10 + 3 G 1,5223726819,0723,082190921,53 x 16 + 3 G 2,52237341325,01138,010895425,33 x 25 + 3 G 4,022374
Continuation
D 21
TOPFLEX®-EMV-3 PLUS 2YSLCY-J for power supply connections
to frequency converters, double screened, 0,6/1kV, meter marking
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
21718,01535,013585327,83 x 35 + 3 G 6,02237512399,02208,016840231,93 x 50 + 3 G 10,022376
2/03056,02871,020745236,83 x 70 + 3 G 10,0223773/04162,03953,025050140,63 x 95 + 3 G 16,0223784/05074,04836,029245,93 x 120 + 3 G 16,022379
300 kcmil6128,05412,033551,73 x 150 + 3 G 25,022380350 kcmil7189,06969,038253,83 x 185 + 3 G 35,022381500 kcmil9540,08540,045361,73 x 240 + 3 G 42,522382
Dimensions and specifications may be changed without prior notice. (RD01)
D 22
D
Signal and power circular connectors
Series A, B, C, D, F and SToolsAccessoriesOnline confi guratorPre-assembled cables
You can fi nd signal and power circular connectors in our catalogue Cable Accessories. Request it now at www.helukabel.de
TOPFLEX®-EMV-UV-3 PLUS 2YSLCYK-J for power supply
connections to frequency converters, double screened, 0,6/1kV, meter marking
PropertiesCable structureTechnical dataBare copper, fine wire conductor toDIN VDE 0295 cl. 5, BS 6360 cl. 5 andIEC 60228 cl. 5
Special motor power supply cable forfrequency converters adapted toDIN VDE 0250
Behavior in fire: Test according toVDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1 (equivalent DIN VDE 0472part 804 test method B)Temperature range
flexing -5 °C bis +70 °Cfixed installation -40 °C bis +70 °C
Polyethylene (PE) core insulationLow mutual capacitance, test according toDIN VDE 0472 part 504, test method B
Core colour: black, brown, grey,green-yellow (earth core divided into 3)
PE-insulation secures a lower dielectric loss,double potential strength, high longevityand low screen-interference currents
Nominal voltage U0/U 600/1000 V Cores stranded in concentric layersOperating voltage, max.
A.C. and 3-phase 700/1200 VDC operation 900/1800 V
3+3 core design1. screening with special aluminum foil
Low mutual capacitance2. screening with copper braiding, tinnedcopper, coverage approx. 80% Meets EMC requirements according to
EN 55011 and DIN VDE 0875 part 11Peak value Û 1700 VTest voltage 2500 V Special PVC outer sheath, schwarz (RAL
9005) Low coupling resistance for highelectromagnetic compatibility
Insulation resistance
min. 200 MOhm x km with meter marking, change-over in 2011Due to the optimal screening aninterference-free operation of frequencyconverters is obtained
Coupling resistance
depending on the cross-sectionmax. 250 Ohm/km
Pos.no. 22685 = capacitancecore/core 270 nF/kmcore/screen 520 nF/km
The 3 Plus-construction of motor powersupply cables features a symmetrical 3-core
Minimum bending radius
fixed installation for outer ø:up to 12 mm: 5x cable ø>12 to 20 mm: 7,5x cable ø>20 mm: 10x cable øfree-movement for outer ø:up to 12 mm: 10x cable ø>12 to 20 mm: 15x cable ø>20 mm: 20x cable ø
NoteThe current carrying capacity for permanentoperation at ambient temperature of30 °C. For deviating ambient temperaturesthe conversion factors should be used andfor further see the indication in DIN VDE 0298part 4
design, improved in terms of EMCcharacteristics comparing favorably with a4-core version. The protective conductorPE, divided into 3 is uniformly stranded inthe interstices. This enables an extremelyconcentric structureThe materials used in manufacture arecadmium-free and contain no silicone andRadiation resistance
up to 80x106 cJ/kg (up to 80 Mrad) free from substances harmful to thewetting properties of lacquersThe minimum cross-section of 0,75² meetsthe requirements of DIN EN 60204 part 1UV-resistantOutdoor application This screened motor supply cable with lowmutual capacitance of the single coresbecause of the special PE core insulationand low screen capacitance enable alow-loss transmission of the powercompared to PVC-sheathed connectingcables
ApplicationAs a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wetenvironments and for outdoor applications, possible for installation in underground at 3x16+3G2,5 mm². Used in the automobile industry,food industry, environmental engineering, packaging industry, toolmaking machinery, handling equipment, for SIMOVERT drivers, they areparticularly suitable for use with industrial pumps, ventilators, conveyor belts and air-conditioning installations and similar applications.Installation in hazardous areas.EMC = Electromagnetic compatibilityThe screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with thefunctional interference requirements of EN 55011.
= The product is conformed with the EC Low-Voltage Directive 2006/95/EG.
Continuation
D 23
TOPFLEX®-EMV-UV-3 PLUS 2YSLCYK-J for power supply
connections to frequency converters, double screened, 0,6/1kV, meter markin
AWG-No.Weight
approx.
kg / km
Cop.
weight
kg / km
Power ratings **)
with 3 loaded cores
in Amperes
Coupling resistanceOuter Ø
approx. mm
No.cores x
cross-sec.
mm²
Part no.
at 30 MHz
Ohm/km
at 1 MHz
Ohm/km
16140,086,0189,93 x 1,5 + 3 G 0,252267314220,0144,0262101811,33 x 2,5 + 3 G 0,52267412323,0224,0342101113,03 x 4 + 3 G 0,752267510420,0298,044150614,93 x 6 + 3 G 1,022676
8615,0491,061180718,43 x 10 + 3 G 1,5226776819,0723,082190921,53 x 16 + 3 G 2,52267841325,01138,010895425,33 x 25 + 3 G 4,02267921718,01535,013585327,83 x 35 + 3 G 6,02268012399,02208,016840231,93 x 50 + 3 G 10,022681
2/03056,02871,020745236,83 x 70 + 3 G 10,0226823/04162,03953,025050140,63 x 95 + 3 G 16,0226834/05075,04836,029245,93 x 120 + 3 G 16,022684
300 kcmil6128,05412,033551,73 x 150 + 3 G 25,022685350 kcmil7189,06969,038253,83 x 185 + 3 G 35,022686500 kcmil9540,08540,061,73 x 240 + 3 G 42,522687
Dimensions and specifications may be changed without prior notice. (RD01)
D 24
D
Cable Glands
Cable glands for standard applications Plastic Glands Cable Glands of Brass AccessoriesCable glands for special application conditions for electromagnetic compatibility EMC for rugged applications and special chemical resistance for high temperature use for explosive areas for special mounting conditions for special pressure conditions
You can fi nd cable glands in our catalogue Cable Accessories.Request it now at www.helukabel.de
g