C-9895
FADISEL S.L.
Registered names and trademarks that arecited are the property of their respective owners
Robot Arm controlled by cable kit.
Manual for Assembly and Use
Page: 01/36
C-9895 Rev. 0836
Contents
Robot Arm:
1. Introduction
2. Required Tools
3. List of Components
4. Plastic Parts
5. Mechanical Assembly
P.3
P.3
P.4
P.5
P.7
Wire Control Unit:
1. Introduction
2. Required Tools
3. List of Components
4. Plastic Parts
5. Mechanical Assembly
P.29
P.29
P.29
P.30
P.30
How It Works
Potential Problems
Schematics
Warnings and Recommendations
Considerations / Warranty
ATTENTION:
P.33
P.35
P.35
P.36
P.36
Not for children under 3 years, contains small parts that can be swallowed.
Suitable for over 10 years, under the supervision of an adult.
Page: 02/36
C-9895 Rev. 0836
ROBOT ARM
1
Introduction:
Learn basic robotics technology,build your own robot arm with fivemotors and five joints.The control unit is equipped with five cable
levers that control the rotation of thebase, the movement of the elbow and the wrist,and function the gripper of the robot arm. The5 motors operate clamping, grasping,releasing, lifting, lowering and turning.A search light increases fun when it
works in the dark.
W
Maximum load it can carry: 100g
H
Dimensions: 2286 (L) x 160 (W) x 381 (H) mm
Weight: 658 g
L
Batteries required:
4 x battery type D (not included)
2
Tools Required:
Needle Nose Pliers
Cutter
Screwdriver
Battery D (4 units)
Page: 03/36
C-9895 Rev. 0836