1
Communication
Chapter 2
2
Layered Protocols (1) Layers, interfaces, and protocols in the OSI model.
3
Layered Protocols (2) A typical message as it appears on the network.
4
Data Link Layer
Discussion between a receiver and a sender in the data link layer.
5
Client-Server TCP
6
Middleware Protocols
An adapted reference model for networked communication.
7
Remote Procedure Call Remote Procedure Call (RPC)
Definition: Information can be transported from the caller to the callee in the parameters and can come back in the procedure result.
Problems Calling and called procedures run on different
machine Executed in different address spaces (more
complications) Passing parameters and results (especially in not
identical or typos) Machine crash or failure when execution
8
Conventional Procedure Call fd: an integer indicating a file buf: an array using call-by-copy/restore nbytes: how many bytes to read
a) Parameter passing in a local procedure call: the stack before the call to read
b) The stack while the called procedure is active
9
Client and Server Stubs Put a different version of read in the client’s
library Client stub
Server-side equivalent of a client stub Server stub
Principle of RPC between a client and server program.
10
Steps of a Remote Procedure Call
1. Client procedure calls client stub in normal way2. Client stub builds message, calls local OS3. Client's OS sends message to remote OS4. Remote OS gives message to server stub5. Server stub unpacks parameters, calls server6. Server does work, returns result to the stub7. Server stub packs it in message, calls local OS8. Server's OS sends message to client's OS9. Client's OS gives message to client stub10. Stub unpacks result, returns to client
11
Passing Value Parameters (1/2) Parameter Marshaling
Packing parameters into a message
Steps involved in doing remote computation through RPC
12
Passing Value Parameters (2/2) Problems
Different char. representations IBM mainframe: EBCDIC character code IBM PC: ASCII character code
Different math. representations One’s complement vs. two’s complement
Data storing way Intel Pentium: store numbers from right to left Sun SPARC: from left to right
How to pass pointers & references
a) Original message on the Pentium
b) The message after receipt on the SPARC
c) The message after being inverted. The little numbers in boxes indicate the address of each byte
13
Parameter Specification and Stub Generation Defining the message format is one aspect
of an RPC protocol A standard of data structure representation An interface consists of a collection of
procedure that can be called by a client. Interface: Interface Definition Language (IDL)
a) A procedureb) The
corresponding message.
14
Extended RPC Models
Need OS support!!
Performance Concern RPC message exchange will cost a lot because they reside in different
machines. IPC (local interprocess communication) can overcome this problem since
they are used in the same machine. Doors
A generic name for a procedure in the address space of a server process that can be called by processes colocated with the server.
A similar mechanism is called Lightweight RPC. A registered door (registered to OS) can be made available to other
processes
15
Asynchronous RPC (1/2) To overcome the drawback of RPC client’s
waiting. Asynchronous RPC can be made both either
concurrently. Combining two asyn. RPCs is sometimes referred
to as a deferred synchronous RPC. Note that “one-way RPCs” don’t need
server to reply an ACK back to the client.
16
Example: DCE RPC DCE (Distributed Computing Environment)
Developed by the Open Software Foundation (OSF)
A middleware system Initially designed for UNIX, now in VMS and
Windows NT Some famous services of the DCE
Distributed file service Directory service Security service Distributed time service
DCE RPC enables a client to access a remote service by simply calling a local procedure.
17
Writing a Client and a Server Using Interface Definition Language (IDL) IDL files contain
type definitions, constant declarations, and information needed to marshal parameters
Formal definition of what the procedures do The syntax of the calls Globally unique identifier for specified interface
Writing client/server DCE RPC (See next page) First, using uuidgen program to generate a prototype IDL
file Second, editing the IDL file, filling the names of the
procedures and their parameters. Call IDL compiler to generate 3 files: the header file, the
client stub, and the server stub Finally, programmer write the client and server code.
18
Writing a Client and a Server
The steps in writing a client and a server in DCE RPC.
19
Binding a Client to a Server How a client can call a server
It is necessary that the server be registered and prepared to accept incoming calls.
Server location announcement 1. Locate the server’s machine 2. Locate the server (i.e., the correct process) on that machine.
The client needs to know an endpoint, (also known as port) which is used by the server’s OS to distinguish incoming messages for diff. processes.
In DCE, a table of (server, endpoint)-pairs is maintained on each server machine by a process called DCE daemon.
Client-to-server binding in DCE.
20
Remote Object Invocation Object encapsulates data, called the state, and the
operations on those data called methods. Methods are made available through an interface. The interface and the objects can be placed in different
machine. Client binds to a distributed object (DO), an implementation
of the object’s interface, called a proxy. Skeleton, a server stub, used to unmarshal invocation
requests to proper method invocations at the object’s interface at the server.
21
Compile-time vs. Runtime Objects A class is a description of an abstract type in terms
of a module with data elements and operations on that data.
Compile-time Advantage: easy to build distributed app. Drawbacks: the dependency on a particular PL.
Runtime Advantage: distributed objects had been written. It’s easy to constructing distributed app. by using objects
in different language. Persistent and Transient Objects
Persistent objects are alive on the server all the time. Transient objects exist only as long as the server manages
the object.
22
Binding a Client to an Object
a) (a) Example with implicit binding using only global referencesb) (b) Example with explicit binding using global and local references
Distr_object* obj_ref; //Declare a systemwide object referenceobj_ref = …; // Initialize the reference to a distributed objectobj_ref-> do_something(); // Implicitly bind and invoke a method
(a)
Distr_object* obj_ref; //Declare a systemwide object referenceLocal_object* obj_ptr; //Declare a pointer to local objectsobj_ref = …; //Initialize the reference to a distributed objectobj_ptr = bind(obj_ref); //Explicitly bind and obtain a pointer to the local proxyobj_ptr -> do_something(); //Invoke a method on the local proxy
(b)
23
Static vs. Dynamic RMI Remote Method Invocation (RMI)
Static invocation The interfaces of an object are known when the client
application is being developed If interfaces change, the client application must be
recompiled. Dynamic invocation
invoke(object, method, input_parameters, output_parameters);
object: distributed object; method: method to be invoked; input_para: data structure; output_para: data structure
For example Static: fobject.append(int) Dynamic: invoke(fobject, id(append), int)
has been known
returns an id for the method append
24
Parameter Passing The situation when passing an object by reference or by
value.
2-18
25
The DCE Distributed-Object Model
a) Distributed dynamic objects in DCE.b) Distributed named objects
26
Persistence and Synchronicity in Communication (1) General organization of a communication system in which
hosts are connected through a network
2-20
27
Persistence and Synchronicity in Communication (2) Persistent communication of letters back in the days of the
Pony Express.
28
Persistence and Synchronicity in Communication (3)
a) Persistent asynchronous communicationb) Persistent synchronous communication
2-22.1
29
Persistence and Synchronicity in Communication (4)
c) Transient asynchronous communicationd) Receipt-based transient synchronous communication
2-22.2
30
Persistence and Synchronicity in Communication (5)
e) Delivery-based transient synchronous communication at message delivery
f) Response-based transient synchronous communication
31
Berkeley Sockets (1) Socket primitives for TCP/IP.
Primitive Meaning
Socket Create a new communication endpoint
Bind Attach a local address to a socket
Listen Announce willingness to accept connections
Accept Block caller until a connection request arrives
Connect Actively attempt to establish a connection
Send Send some data over the connection
Receive Receive some data over the connection
Close Release the connection
32
Berkeley Sockets (2)
Connection-oriented communication pattern using sockets.
33
The Message-Passing Interface (MPI) MPI is used in local communication system Socket, in contrast with MPI, has two
drawbacks Wrong level of abstraction by supporting send
and receive primitives. Using general protocol stacks, TCP/IP
Socket is not suitable for COWs (Cluster of Workstations) or MPPs (Massively Parallel Processors)
MPI is designed for parallel applications MPI use (groupID, processID) to replace
TCP/IP.
34
The Message-Passing Interface (MPI) Some of the most intuitive message-passing primitives of
MPI.
Primitive Meaning
MPI_bsend Append outgoing message to a local send buffer
MPI_send Send a message and wait until copied to local or remote buffer
MPI_ssend Send a message and wait until receipt starts
MPI_sendrecv Send a message and wait for reply
MPI_isend Pass reference to outgoing message, and continue
MPI_issend Pass reference to outgoing message, and wait until receipt starts
MPI_recv Receive a message; block if there are none
MPI_irecv Check if there is an incoming message, but do not block
35
Message-Queuing Model (1/2) Also called as Message-Oriented Middleware (MOM) Intermediate-term storage capacity for messages,
without requiring either the sender or receiver to be active during message transmission.
Difference with Berkeley socket and MPI Applications communicate by inserting messages
in specific queues. A queue can be read only by its associated
application, but it is also possible for multiple applications to share a single queue.
Loosely-coupled communication Like the Internet e-mail system Allow a process to install a handler as a callback
function, which is automatically invoked whenever a message is put into the queue.
36
Message-Queuing Model (2/2) Four combinations for loosely-coupled communications using
queues.
37
Message-Queuing Model (2) Basic interface to a queue in a message-queuing system.
Primitive Meaning
Put Append a message to a specified queue
GetBlock until the specified queue is nonempty, and remove the first message
PollCheck a specified queue for messages, and remove the first. Never block.
NotifyInstall a handler to be called when a message is put into the specified queue.
38
General Architecture of a Message-Queuing System (1/3) The relationship between queue-level addressing and
network-level addressing.
39
General Architecture of a Message-Queuing System (2/3)
Source queue Local to the sender On the same machine or on a machine nearby
such as on the same LAN. Destination queue
Local to the receiver Queue manager
Interacts directly with the application that is sending or receiving a message
Relays Special queue managers that operate as routers
40
General Architecture of a Message-Queuing System (3/3) The general organization of a message-queuing system with
routers.
41
Message Brokers The problem of integrating existing and new applications into
a single, coherent distributed information system. Acts as an application-level gateway To convert incoming messages to a format that can be
understood by the destination application. Simple as a reformatter for messages. The general organization of a message broker in a message-
queuing system.
42
Example: IBM MQSeries General organization of IBM's MQSeries message-queuing
system.
43
Channels Some attributes associated with message channel agents.
Attribute Description
Transport type Determines the transport protocol to be used
FIFO delivery Indicates that messages are to be delivered in the order they are sent
Message length Maximum length of a single message
Setup retry count
Specifies maximum number of retries to start up the remote MCA
Delivery retries Maximum times MCA will try to put received message into queue
44
Message Transfer (1) The general organization of an MQSeries queuing network
using routing tables and aliases.
45
Message Transfer (2)
Primitives available in an IBM MQSeries MQI
Primitive Description
MQopen Open a (possibly remote) queue
MQclose Close a queue
MQput Put a message into an opened queue
MQget Get a message from a (local) queue
46
Data Stream (1/3) Continuous media
The temporal relationships between different data items are fundamental to correctly interpreting what the data actually means.
Discrete media The temporal relationships between different data items
are not fundamental to correctly interpreting the data. Data stream
Nothing but a sequence of data units.
47
Data Stream (2/3) Asynchronous transmission mode
The data item in a stream are transmitted one after the other, but there are no further timing constraints on when transmission of items should take place.
Synchronous transmission mode There is a maximum end-to-end delay defined for each
unit in a data stream Isochronous transmission mode
It is necessary that data units are transferred on time. Data transfer is subject to a maximum and minimum end-
to-end delay, also referred to as bounded (delay) jitter.
48
Data Stream (3/3) Simple stream
Consists of only a single sequence of data Complex stream
Consists of several related simple stream, called substreams.
Main problem with multicast streaming is when the receivers have different requirements with respect to the quality of the stream.
Filter
49
Streams and Quality of Service (QoS) Quality of Service (QoS)
Time-dependent (and other nonfunctional) requirements are generally expressed as
Flow specification Bandwidth requirements, transmission rates,
delays, etc. Token bucket algorithm
How the stream will shape its network traffic
50
Specifying QoS
A flow specification.
Characteristics of the Input Service Required
maximum data unit size (bytes)Token bucket rate (bytes/sec)Toke bucket size (bytes)Maximum transmission rate (bytes/sec)
Loss sensitivity (bytes)Loss interval (sec)Burst loss sensitivity (data units)Minimum delay noticed (sec)Maximum delay variation (sec)Quality of guarantee
51
Setting Up a Stream Resource reSerVation Protocol (RSVP)
A transport-level control protocol for enabling resource reservation in network routers.
Does not interpret the flow specification Receiver-initiated QoS protocol
In fact, to make RSVP work, the RSVP process will have to translate the QoS parameters of its flow specifications into things that make sense to the data link layer.
52
Synchronization Mechanisms (1) The principle of explicit synchronization on the level data
units.
53
Synchronization Mechanisms (2) The principle of synchronization as supported by high-level
interfaces.
2-41