ConveyorComponents
ConveyorComponents
Bulletin No. 02087 June/2001 Printed in Italy
AustriaDenmarkFranceGermany
ItalyNetherlandsUnited KingdomCanadaUnited States
Mexico
BrazilAustraliaSingaporeChina
- Wien- Copenhagen- Paris-Lyon- Betzdorf (with distribution centre)- Düsseldorf -Siegen-Stuttgart- Correggio (with distribution centre)- ‘s-Gravenzande (with distribution centre)- Warrington- Edmonton-Montreal-Toronto-Vancouver- Atlanta (GA)-Columbus (OH)- Dallas (TX)-Fresno (CA)-Grafton (WI)- Cordoba-Guadalajara- Mexico City-Queretaro- Sao Leopoldo-Sao Paulo- Melbourne-Sydney- Singapore- Shangai
SALES OFFICES:
Rexnord Marbett S.p.A.ItalyVia della Costituzione, 4542015 Correggio (RE)Tel. 0522 - 639333Fax 0522 - 637778E-mail [email protected] www.rexnordmarbett.com
RMCC NederlandP.O. Box 1122690 AC ‘s-GravenzandeThe NetherlandsPhone 0174 - 445111Fax 0174 - 445222E-mail [email protected] www.mcc-nl.nl
C o n t e n t s
FRAME SUPPORTCOMPONENTSPage 38
CHAIN GUIDECOMPONENTSPage 2
PRODUCT HANDLINGCOMPONENTS
Page 56
MISCELLANEOUS COMPONENTSPage 122
Chain guide profiles Page 4
Corner tracks and straight tracks Page 16
Roller guides for chain return Page 25
Serpentine guides for chainreturn Page 33
Expansion plugs for sidesconnection Page 36
Material characteristics Page 140
Operating temperatures Page 141
Calculation of thermal expansion Page 141
Resistance against chemical agents Page 142
Position of chain guide profiles Page 144
Position of transfer modules Page 145
Product guides Page 58
Guide rail clamps Page 84
Guide rail brackets Page 96
Connecting clamps Page 114
Hinges Page 124
Locks Page 126
Tightening elements Page 127
Sliding rollers Page 130
Winding tensioners Page 134
Nozzles Page 135
Cable carriage chains Page 136
Split shaft collars Page 137
TECHNICAL INFORMATIONPage 139
Side mounting top brackets Page 40
Bearing heads Page 42
Support bases Page 44
Connecting joints Page 50
Conveyor Components
C o n t e n t s
FRAME SUPPORTCOMPONENTSPage 38
CHAIN GUIDECOMPONENTSPage 2
PRODUCT HANDLINGCOMPONENTS
Page 56
MISCELLANEOUS COMPONENTSPage 122
Chain guide profiles Page 4
Corner tracks and straight tracks Page 16
Roller guides for chain return Page 25
Serpentine guides for chainreturn Page 33
Expansion plugs for sidesconnection Page 36
Material characteristics Page 140
Operating temperatures Page 141
Calculation of thermal expansion Page 141
Resistance against chemical agents Page 142
Position of chain guide profiles Page 144
Position of transfer modules Page 145
Product guides Page 58
Guide rail clamps Page 84
Guide rail brackets Page 96
Connecting clamps Page 114
Hinges Page 124
Locks Page 126
Tightening elements Page 127
Sliding rollers Page 130
Winding tensioners Page 134
Nozzles Page 135
Cable carriage chains Page 136
Split shaft collars Page 137
TECHNICAL INFORMATIONPage 139
Side mounting top brackets Page 40
Bearing heads Page 42
Support bases Page 44
Connecting joints Page 50
Conveyor Components
2 3
Conveyor Components Conveyor Components
CHAIN GUIDE PROFILES
Part. 251 - Page 5 Chain guide profile.
Part. 387 - Page 7 Chain guide profile. Multiplestrands K87 / pitch 88
Part. 559 - Page 9 Clamp for Part. 366-367-368.
Part. 223 - Page 13 Chain guide profile for rollerchain ANSI 60.
Part. 244 - Page 5 Chain guide profile.
Part. 366 - Page 8 Chain guide profile. Multiplestrands K82,5 / pitch 88
Part. 551 - Page 10 Chain inlet guide shoe (side).
Part. 274 - Page 13 Chain guide profile for rollerchain ISO 12 B1.
Part. 262 - Page 4 Chain guide profile.
Part. 263 - Page 6 Chain guide profile. Multiple strands K82,5 / pitch 88
Part. 367 - Page 8 Chain guide profile. Multiplestrands K82,5 / pitch 85-83,5
Part. 550 - Page 10 Chain inlet guide shoe (centre). To be used with Part. 366.
Part. 215 - Page 13Clamp for Part. 310-356-223-274.
Part. 261 - Page 4 Chain guide profile.
Part. 242 - Page 6 Chain guide profile. Multiplestrands K82,5 / pitch 88
Part. 368 - Page 8 Chain guide profile.
Part. 550 - Page 11 Chain inlet guide shoe (centre). To be used with Part. 367.
Part. 216 - Page 14 Clamp for Part. 310-356-223-274.
Part. 243 - Page 4 Chain guide profile.
Part. 362 - Page 6Chain guide profile. Multiple strands K82,5 / pitch 85
Part. 371 - Page 9 Mounting block for Part. 366-367-368.
Part. 310 - Page 12 Chain guide profile. Multiple strands K82,5 / pitch 88
Part. 275 - Page 14Clamp for Part. 310-356-223-274.
Part. 241 - Page 5 Chain guide profile.
Part. 386 - Page 7 Chain guide profile. Multiplestrands K87 / pitch 88
Part. 370 - Page 9-15 Sealing profile for Part. 366-367-368-422.
Part. 356 - Page 12 Chain guide profile. Multiple strands K82,5 / pitch 85-83,5
Part. 422 - Page 15 Chain guide profile. Multiple strands K82,5 / pitch 85-83,5
CHAIN GUIDE COMPONENTS CHAIN GUIDE COMPONENTS
ROLLER GUIDES FOR CHAIN RETURN
Part. 125 - Page 26 Double roller ø 42,5 mm. Mul-tiple strands K82,5 / pitch 88.
SERPENTINE GUIDES FOR CHAIN RETURN
Part. 533 - Page 35 Striker.
Part. 533 - Page 35 Striker (centre). Multiple strands K82,5 / pitch 85.
Part. 282 - Page 33 Chain return guide.
Part. 524 - Page 35 Sliding profile.
Part. 282 - Page 33 Chain return guide. Snap-on assembly.
Part. 523 - Page 34 Spacer. For K82,5. Multiplestrands K82,5 / pitch 83,5÷88.
Part. 523 - Page 34 Spacer. For K82,5. Multiplestrands K82,5 / pitch 83,5÷88.
EXPANSION PLUGS FOR SIDES CONNECTION
Part. 565 - Page 36 Expansion plug for tubesø 18-20 mm.
Part. 179 - Page 36 Expansion plug for tubesø 38-42,4 mm.
Part. 566 - Page 37 Expansion plug for square tubes 20 mm.
Part. 592 - Page 37 Expansion plug for squaretubes 40 mm.
In alluminium with round hole with square hole
Part. 614 - Page 29 Roller ø 60 mm. For K82,5.For K82,5 / pitch 83,5÷88.
Rubber surface
Part. 37 - Page 31 Guiding flange for part. 11.
Part. 153 - Page 25 Snap-on wear shoe.
Part. 73 - Page 26 Roller ø 42,5 mm. For K82,5.For K82,5 / pitch 83,5÷88.
Part. 126 - Page 26 Distance gear.
Part. 125 - Page 27 Double roller ø 42,5 mm. Mul-tiple strands K82,5 / pitch 85.
Part. 561 - Page 28 Roller ø 50 mm. For K82,5.For K82,5 / pitch 83,5-88.
Part. 560 - Page 28 Roller ø 50 mm. Multiplestrands K82,5 / pitch 83,5.
Part. 421 - Page 27 Roller ø 42,5 mm. Multiple strands K82,5 / pitch 83,5.
Part. 388 - Page 27 Roller ø 42,5 mm. Multiple strands K87 / pitch 88.
Part. 613 - Page 29 Roller ø 60 mm. Multiple strands K82,5 / pitch 83,5- 85.
Part. 556 - Page 30 Roller ø 60 mm. For K82,5.For K82,5 / passo 83,5÷88.
Part. 554 - Page 30 Roller ø 60 mm. Multiple strands K82,5 / pitch 83,5-85.
Rubber surface
Part. 555 - Page 30 Guiding flange for part. 554-613.
Part. 11 - Page 31 Roller ø 60 mm. For K82,5. Mul- tiple strands K82,5 / pitch 88.
Part. 67-22-74 - Page 32 Rollers. For K82,5-101,6. For K82,5 / pitch 85-88.
Part. 22 M - Page 32 Roller. Multiple strands K82,5 /pitch 85.
Part. 624 - Page 31 Distance gear.
CORNER TRACKS AND STRAIGHT TRACKS
Series STU - Page 18 Straight tracks for chains Series 8811 TAB-879 TAB-880 TAB.
Series KTU 200 - Page 19 Corner tracks for chains Series882 TAB.
Series KSU - Page 16 Corner tracks for chains Series881- 8811-880.
Series STU 200 - Page 19 Straight tracks for chains Series 882 TAB.
Series SSU - Page 16Straight tracks for chains Series 881-8811-880.
Series KMU - Page 20 Magnetic corner tracks forchains Series 881 M.
Series KSU 200 - Page 17Corner tracks for chains Series882.
Series KTU - Page 18 Corner tracks for chains Series8811 TAB-879 TAB-880 TAB.
Series STU 300 - Page 22 Straight tracks for chains Series 1874-4874-1873
Series KTU 200 - Page 23 Corner tracks for chains SeriesSLBP 882 TAB-LBP 883.
Series STU 200 - Page 23 Straight tracks for chains Series SLBP 882 TAB-LBP 883.
Series KTU 500 - Page 24 Corner tracks for chains Series1700TABK-1701TABK-1710TABK-1713TABK
Series STU 500 - Page 24 Straight tracks for chains Series1700TABK-1701TABK-1710TABK-1713TABK
Series KTU 300 - Page 22 Corner tracks for chains Series1874- 4874-1873
Series KLPC - Page 21 Corner tracks for chains SeriesLPC 279.
Series COMBI - Page 20 Magnetic corner tracks forchains Series 881 M-880 MG.
2 3
Conveyor Components Conveyor Components
CHAIN GUIDE PROFILES
Part. 251 - Page 5 Chain guide profile.
Part. 387 - Page 7 Chain guide profile. Multiplestrands K87 / pitch 88
Part. 559 - Page 9 Clamp for Part. 366-367-368.
Part. 223 - Page 13 Chain guide profile for rollerchain ANSI 60.
Part. 244 - Page 5 Chain guide profile.
Part. 366 - Page 8 Chain guide profile. Multiplestrands K82,5 / pitch 88
Part. 551 - Page 10 Chain inlet guide shoe (side).
Part. 274 - Page 13 Chain guide profile for rollerchain ISO 12 B1.
Part. 262 - Page 4 Chain guide profile.
Part. 263 - Page 6 Chain guide profile. Multiple strands K82,5 / pitch 88
Part. 367 - Page 8 Chain guide profile. Multiplestrands K82,5 / pitch 85-83,5
Part. 550 - Page 10 Chain inlet guide shoe (centre). To be used with Part. 366.
Part. 215 - Page 13Clamp for Part. 310-356-223-274.
Part. 261 - Page 4 Chain guide profile.
Part. 242 - Page 6 Chain guide profile. Multiplestrands K82,5 / pitch 88
Part. 368 - Page 8 Chain guide profile.
Part. 550 - Page 11 Chain inlet guide shoe (centre). To be used with Part. 367.
Part. 216 - Page 14 Clamp for Part. 310-356-223-274.
Part. 243 - Page 4 Chain guide profile.
Part. 362 - Page 6Chain guide profile. Multiple strands K82,5 / pitch 85
Part. 371 - Page 9 Mounting block for Part. 366-367-368.
Part. 310 - Page 12 Chain guide profile. Multiple strands K82,5 / pitch 88
Part. 275 - Page 14Clamp for Part. 310-356-223-274.
Part. 241 - Page 5 Chain guide profile.
Part. 386 - Page 7 Chain guide profile. Multiplestrands K87 / pitch 88
Part. 370 - Page 9-15 Sealing profile for Part. 366-367-368-422.
Part. 356 - Page 12 Chain guide profile. Multiple strands K82,5 / pitch 85-83,5
Part. 422 - Page 15 Chain guide profile. Multiple strands K82,5 / pitch 85-83,5
CHAIN GUIDE COMPONENTS CHAIN GUIDE COMPONENTS
ROLLER GUIDES FOR CHAIN RETURN
Part. 125 - Page 26 Double roller ø 42,5 mm. Mul-tiple strands K82,5 / pitch 88.
SERPENTINE GUIDES FOR CHAIN RETURN
Part. 533 - Page 35 Striker.
Part. 533 - Page 35 Striker (centre). Multiple strands K82,5 / pitch 85.
Part. 282 - Page 33 Chain return guide.
Part. 524 - Page 35 Sliding profile.
Part. 282 - Page 33 Chain return guide. Snap-on assembly.
Part. 523 - Page 34 Spacer. For K82,5. Multiplestrands K82,5 / pitch 83,5÷88.
Part. 523 - Page 34 Spacer. For K82,5. Multiplestrands K82,5 / pitch 83,5÷88.
EXPANSION PLUGS FOR SIDES CONNECTION
Part. 565 - Page 36 Expansion plug for tubesø 18-20 mm.
Part. 179 - Page 36 Expansion plug for tubesø 38-42,4 mm.
Part. 566 - Page 37 Expansion plug for square tubes 20 mm.
Part. 592 - Page 37 Expansion plug for squaretubes 40 mm.
In alluminium with round hole with square hole
Part. 614 - Page 29 Roller ø 60 mm. For K82,5.For K82,5 / pitch 83,5÷88.
Rubber surface
Part. 37 - Page 31 Guiding flange for part. 11.
Part. 153 - Page 25 Snap-on wear shoe.
Part. 73 - Page 26 Roller ø 42,5 mm. For K82,5.For K82,5 / pitch 83,5÷88.
Part. 126 - Page 26 Distance gear.
Part. 125 - Page 27 Double roller ø 42,5 mm. Mul-tiple strands K82,5 / pitch 85.
Part. 561 - Page 28 Roller ø 50 mm. For K82,5.For K82,5 / pitch 83,5-88.
Part. 560 - Page 28 Roller ø 50 mm. Multiplestrands K82,5 / pitch 83,5.
Part. 421 - Page 27 Roller ø 42,5 mm. Multiple strands K82,5 / pitch 83,5.
Part. 388 - Page 27 Roller ø 42,5 mm. Multiple strands K87 / pitch 88.
Part. 613 - Page 29 Roller ø 60 mm. Multiple strands K82,5 / pitch 83,5- 85.
Part. 556 - Page 30 Roller ø 60 mm. For K82,5.For K82,5 / passo 83,5÷88.
Part. 554 - Page 30 Roller ø 60 mm. Multiple strands K82,5 / pitch 83,5-85.
Rubber surface
Part. 555 - Page 30 Guiding flange for part. 554-613.
Part. 11 - Page 31 Roller ø 60 mm. For K82,5. Mul- tiple strands K82,5 / pitch 88.
Part. 67-22-74 - Page 32 Rollers. For K82,5-101,6. For K82,5 / pitch 85-88.
Part. 22 M - Page 32 Roller. Multiple strands K82,5 /pitch 85.
Part. 624 - Page 31 Distance gear.
CORNER TRACKS AND STRAIGHT TRACKS
Series STU - Page 18 Straight tracks for chains Series 8811 TAB-879 TAB-880 TAB.
Series KTU 200 - Page 19 Corner tracks for chains Series882 TAB.
Series KSU - Page 16 Corner tracks for chains Series881- 8811-880.
Series STU 200 - Page 19 Straight tracks for chains Series 882 TAB.
Series SSU - Page 16Straight tracks for chains Series 881-8811-880.
Series KMU - Page 20 Magnetic corner tracks forchains Series 881 M.
Series KSU 200 - Page 17Corner tracks for chains Series882.
Series KTU - Page 18 Corner tracks for chains Series8811 TAB-879 TAB-880 TAB.
Series STU 300 - Page 22 Straight tracks for chains Series 1874-4874-1873
Series KTU 200 - Page 23 Corner tracks for chains SeriesSLBP 882 TAB-LBP 883.
Series STU 200 - Page 23 Straight tracks for chains Series SLBP 882 TAB-LBP 883.
Series KTU 500 - Page 24 Corner tracks for chains Series1700TABK-1701TABK-1710TABK-1713TABK
Series STU 500 - Page 24 Straight tracks for chains Series1700TABK-1701TABK-1710TABK-1713TABK
Series KTU 300 - Page 22 Corner tracks for chains Series1874- 4874-1873
Series KLPC - Page 21 Corner tracks for chains SeriesLPC 279.
Series COMBI - Page 20 Magnetic corner tracks forchains Series 881 M-880 MG.
Conveyor Components Conveyor Components
4 5
20 3
34
3 205
20
10
3
20
3
32
L
H
18 2
2,5
2 18
32,
5
2 18
32
10
P+ 6 0
H+ 1 0
45
Part. 261
Part. 251
Part. 241
Part. 251
Part. 243
Part. 261
Part. 244
82,5
42,143
20
Part. 262
Part. 241
Part. 262
100
82,5
4918
Part. 241
Part. 251
Part. 241
Part. 251
Part. 241
Part. 251
Part. 261
114,3
42,143
152,4-190,5
42,14345
Part. 241
Part. 251
Part. 251
Part. 262
Part.386
Part. 244 Part. 261
Part. 244
100
Part. 261
Part. 261
Part. 241
Part. 244
190,5
80,582,5
Part. 262
Part. 262
Part. 261
Part. 262
190,5
136,5140
114,3
57,2
60
82,5-114,3-152,4
31,75Part. 223pag. 15
34,6
95,2
57,260
95,2
Part. 244
190,5
Part. Colour CodePackaging
metres
Part. Colour CodePackaging
metres
262 Black 6365145
Reinforced version
Part. Colour Code
Part. 262
Part. 261
Part. 243
Part. 241
Part. 251
Part. 244
- Standard packaging : coil.
- Applicable to 2,5 to 4 mm thick sheet metal.- Standard packaging : coil.- Accessories :
Packagingmetres
243 Green 6370190
Part. Colour Code
- Standard packaging : coil.- Accessories :
Packagingmetres
Green 40261 65681
Part. Colour CodePackaging
metres
- Applicable to 2,5 to 4 mm thick sheet metal.- Standard packaging : coil.
Green 40251 63631
- Standard packaging : coil.
Black 80 60356
Green 80241
63641
Part. Colour CodePackaging
metres
Green
Black
608060606050
6080
20 x 320 x 525 x 330 x 340 x 340 x 5
20 x 320 x 5
244
6371163691637216373163661608172
6038660376
L x Hmm
Chain guide profile Chain guide profile
Chain guide profile
Chain guide profile
Chain guide profile
Chain guide profile
• Material Polyethylene UHMWPE with molecular density 5.600.000.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
• TableTop® double hinge chain series 821
Fig. 1 - Chain width 82,5 mm (K 325) / Guide clearance 45 mm
Fig. 2 - Chain width 82,5 mm (K 325) / Guide clearance 49 mm
Fig. 3 - Chain width 114,3 mm (K 450)
Fig. 4 - Chain width 152,4 mm (K600), 190,5 (K750)
Fig. 6 - Chain width 190,5 mm (K 750)
• TableTop® chains series 882 TAB
• PlateTop chains series 1874 - 4874 - 1873
• Low backline pressure chains series SLBP 882 TAB - SLBP 821
Fig. 8 - Chain width 114,3 mm (K 450)
Fig. 10 - Chain width 82,5 mm (K 325), 114,3 mm (K 450), 152,4 mm (K 600)
Fig. 11 - Chain width 95,2 mm (K 375)
Fig. 12 - Chain width 190,5 mm (K 750)
Fig. 7 - Chain width 254 mm (K 1000), 304,8 mm (K 1200). Use the guides of Fig. 5.
Fig. 9 - Chain width 190,5 mm (K 750), 254 mm (K 1000), 304,8 mm (K 1200). Use the guides of Fig. 4.
• TableTop® double hinge chain series 802 - 805
Fig. 5 - Chain width 190,5 mm (K 750)
Chain inlet guide shoe side Part.551. See page 10.
Chain inlet guide shoe side Part.551. See page 10.
- Standard packaging : coil.- Accessories :
Chain inlet guide shoe side Part.551. See page 10.
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Conveyor Components Conveyor Components
4 5
20 3
34
3 20
5
20
10
3
20
3
32
L
H
18 2
2,5
2 18
32,
5
2 18
32
10
P+ 6 0
H+ 1 0
45
Part. 261
Part. 251
Part. 241
Part. 251
Part. 243
Part. 261
Part. 244
82,5
42,143
20
Part. 262
Part. 241
Part. 262
100
82,5
4918
Part. 241
Part. 251
Part. 241
Part. 251
Part. 241
Part. 251
Part. 261
114,3
42,143
152,4-190,5
42,14345
Part. 241
Part. 251
Part. 251
Part. 262
Part.386
Part. 244 Part. 261
Part. 244
100
Part. 261
Part. 261
Part. 241
Part. 244
190,5
80,582,5
Part. 262
Part. 262
Part. 261
Part. 262
190,5
136,5140
114,3
57,2
60
82,5-114,3-152,4
31,75Part. 223pag. 15
34,6
95,2
57,260
95,2
Part. 244
190,5
Part. Colour CodePackaging
metres
Part. Colour CodePackaging
metres
262 Black 6365145
Reinforced version
Part. Colour Code
Part. 262
Part. 261
Part. 243
Part. 241
Part. 251
Part. 244
- Standard packaging : coil.
- Applicable to 2,5 to 4 mm thick sheet metal.- Standard packaging : coil.- Accessories :
Packagingmetres
243 Green 6370190
Part. Colour Code
- Standard packaging : coil.- Accessories :
Packagingmetres
Green 40261 65681
Part. Colour CodePackaging
metres
- Applicable to 2,5 to 4 mm thick sheet metal.- Standard packaging : coil.
Green 40251 63631
- Standard packaging : coil.
Black 80 60356
Green 80241
63641
Part. Colour CodePackaging
metres
Green
Black
608060606050
6080
20 x 320 x 525 x 330 x 340 x 340 x 5
20 x 320 x 5
244
6371163691637216373163661608172
6038660376
L x Hmm
Chain guide profile Chain guide profile
Chain guide profile
Chain guide profile
Chain guide profile
Chain guide profile
• Material Polyethylene UHMWPE with molecular density 5.600.000.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
• TableTop® double hinge chain series 821
Fig. 1 - Chain width 82,5 mm (K 325) / Guide clearance 45 mm
Fig. 2 - Chain width 82,5 mm (K 325) / Guide clearance 49 mm
Fig. 3 - Chain width 114,3 mm (K 450)
Fig. 4 - Chain width 152,4 mm (K600), 190,5 (K750)
Fig. 6 - Chain width 190,5 mm (K 750)
• TableTop® chains series 882 TAB
• PlateTop chains series 1874 - 4874 - 1873
• Low backline pressure chains series SLBP 882 TAB - SLBP 821
Fig. 8 - Chain width 114,3 mm (K 450)
Fig. 10 - Chain width 82,5 mm (K 325), 114,3 mm (K 450), 152,4 mm (K 600)
Fig. 11 - Chain width 95,2 mm (K 375)
Fig. 12 - Chain width 190,5 mm (K 750)
Fig. 7 - Chain width 254 mm (K 1000), 304,8 mm (K 1200). Use the guides of Fig. 5.
Fig. 9 - Chain width 190,5 mm (K 750), 254 mm (K 1000), 304,8 mm (K 1200). Use the guides of Fig. 4.
• TableTop® double hinge chain series 802 - 805
Fig. 5 - Chain width 190,5 mm (K 750)
Chain inlet guide shoe side Part.551. See page 10.
Chain inlet guide shoe side Part.551. See page 10.
- Standard packaging : coil.- Accessories :
Chain inlet guide shoe side Part.551. See page 10.
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
6 7
Conveyor Components Conveyor Components
P+ 6 0
H+ 1 0
20 3
5
4
6 31 643
54
3
20 3 20
6 31 643
5418 4 18
4032,
5
5 31 541
45
82,5 5,5
50 88 50
42,1 433
4
45
Part. 262
Part. 263
82,5 5,5
50 88 50
42,143
22,5
Part. 261
Part. 242
82,5 2,5
50 85 50
42,1 4344,5
Part. 262
Part. 362
82,5 5,5
50 88 50
42,1 4345
Part. 262
Part. 263
Multi strand conveyors, with 82,5 mm width chains and pitch 88 mm, can be modified to convey PET bottles with pethal bottom or other unstable products.
Change chains from 82,5 mm to 87 mm width and wear strips, in this way the Gap between chains is reduced from 5,5 mm to 1 mm while the conveyor frame is unchanged.
87 1
50 88 50
42,143
45
Part. 386
Part. 387
386 Black 6609645
Reinforced version
Part. Colour Code
- Use : see Fig. 16.- Can be used in combination with Part. 387.- Standard packaging : coil.
Packagingmetres
- Use : see Fig. 14.- Standard packaging : coil.
Chain guide profile
Chain guide profile
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 13 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 14 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 15 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Part. 386
- Use : see Fig. 13.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Chain guide profilePart. 263
Reinforced version
Part. Colour CodeLengthmetres
Black36263
694321*63681
Part. Colour CodeLengthmetres
Reinforced version
- Use : see Fig. 16.- Can be used in combination with Part. 386.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Black36387
Chain guide profile Part. 387Part. 242Part. Colour Code
Packagingmetres
Green 80242 63671
Reinforced version - Use : see Fig. 15.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Chain guide profilePart. 362Part. Colour Code
Lengthmetres
Green36
362
Black36
69434161726
• TableTop® chains series 820 - 880TAB
Fig. 16 - Chain width 87 mm (K 343) / Pitch 88 mm
CHAIN GUIDE PROFILES
• Material Polyethylene UHMWPE with molecular density 5.600.000.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
CHAIN GUIDE PROFILES
694331*67435
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
694351*66106
6 7
Conveyor Components Conveyor Components
P+ 6 0
H+ 1 0
20 3
5
4
6 31 643
54
3
20 3 20
6 31 643
5418 4 18
4032,
5
5 31 541
45
82,5 5,5
50 88 50
42,1 433
4
45
Part. 262
Part. 263
82,5 5,5
50 88 50
42,143
22,5
Part. 261
Part. 242
82,5 2,5
50 85 50
42,1 4344,5
Part. 262
Part. 362
82,5 5,5
50 88 50
42,1 4345
Part. 262
Part. 263
Multi strand conveyors, with 82,5 mm width chains and pitch 88 mm, can be modified to convey PET bottles with pethal bottom or other unstable products.
Change chains from 82,5 mm to 87 mm width and wear strips, in this way the Gap between chains is reduced from 5,5 mm to 1 mm while the conveyor frame is unchanged.
87 1
50 88 50
42,143
45
Part. 386
Part. 387
386 Black 6609645
Reinforced version
Part. Colour Code
- Use : see Fig. 16.- Can be used in combination with Part. 387.- Standard packaging : coil.
Packagingmetres
- Use : see Fig. 14.- Standard packaging : coil.
Chain guide profile
Chain guide profile
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 13 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 14 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 15 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Part. 386
- Use : see Fig. 13.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Chain guide profilePart. 263
Reinforced version
Part. Colour CodeLengthmetres
Black36263
694321*63681
Part. Colour CodeLengthmetres
Reinforced version
- Use : see Fig. 16.- Can be used in combination with Part. 386.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Black36387
Chain guide profile Part. 387Part. 242Part. Colour Code
Packagingmetres
Green 80242 63671
Reinforced version - Use : see Fig. 15.- Standard packaging : bars of 3 and 6 metres.- Packaging : 96 metres.
Chain guide profilePart. 362Part. Colour Code
Lengthmetres
Green36
362
Black36
69434161726
• TableTop® chains series 820 - 880 TAB
Fig. 16 - Chain width 87 mm (K 343) / Pitch 88 mm
CHAIN GUIDE PROFILES
• Material Polyethylene UHMWPE with molecular density 5.600.000.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
CHAIN GUIDE PROFILES
694331*67435
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
694351*66106
8 9
Conveyor Components Conveyor Components
REX
REX
REX
REX
1,5
20 3 2043
103
8,520
2316
40
8,5
20
10
23
1,5 16 Part. 550page 11
Part. 592page 37
1,5
8,5
20
30
3
19
20
h
d8,21,
215
s16,8
M6x80
Self-locking nut
20
65
60Df
Part. 371 - Code 64026 (M6 version).
Part. 179page 36
Tube dia. 38 mmM6
Tube dia. 38
Part. 371
Part.371
P+ 6 0
H+ 1 0
500
P
82,5 5,5
50 88 50
42,1 4345
Part. 261
Part. 243
Part. 366
Part. 243
Part. 367
82,5 2,5
50 85 50
42,1 4345
Part. 261
Part. 243
82,5 1
50 83,5 50
42,144
43Part. 367
Part. 261
114,3 5,7
120
42,1 43Part. 366
152,4 5,6
158
42,1 43
Part. 241
Part. 366
Part. 241
Part. 244Part. 367
Part. 368
Part. 262
500
Part. 366
Part. 367
Part. 368
1,10
- Use : see Fig. 18-19-22-23.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 36 metres.- Accessories :
Part. Colour CodeLengthmetres
Green36366
64056M69585M
Weightkg/m
- Use : see Fig. 17-20-21.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 36 metres.- Accessories :
1,10
Part. Colour CodeLengthmetres
Green36367
64046M69615M
Weightkg/m
- Use : recommended with MatTop ® chains in abrasive environment / high speed / high temperature. See Fig. 22-23. - Packaging : 36 metres.
0,90
Part. CodeLengthmetres
36368
6406669645
Weightkg/m
Accessories
Part. Code
371
Part. 371 (M6 version) shall be used to assemble wear stripson Part. 559.
- Use : when applied to the metal profile, this product improves guide cleanliness.- Material : rubber EPDM 80 (black).- Standard packaging : coil.- Packaging : 20 metres.
- Use : easy assembly of wear strips on frame. Assembly with M6 or M8 hexagon bolt.- Material : reinforced polyamide PA FV (black).- Packaging : 100 pieces.
6,2 ( for screws M 6)8,1 (for screws M 8)
4,56
10,213,2
dmm
hmm
Hexagons
mm
- Use : easy assembly of wear strips on tube dia. 38 mm.- Material : clamp in reinforced polyamide PA FV (black). Bolts and nuts in stainless steel AISI 304.- Packaging : 50 pieces.
370
Part. Code
559 Ø 38
Part.
Bore dia.Df
mm Code
Part. 366-367-368
Part. 371
Part. 371
Part. 370
Part. 559
Part. 366 367 368
Part. 366-367-368
Chain guide profile
Chain guide profile
Chain guide profile
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in stainless steel AISI 304.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection of Part. 366-367-368
Defle
ctio
n (m
m)
Load P (Newton)800600 1000 1200400
1
2
3
Mounting block
Sealing profile
Fixing clamp
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 17 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 18 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 19 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 20 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 21 - Chain width 152,4 mm (K 600) / Pitch 158 mm
Fig. 22 - Parallel wear strips. Reccomended with medium- light loads.
Fig. 23 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
Chain inlet guide shoe centre Part.550. See page 10.
Chain inlet guide shoe centre Part.550. See page 11.
• MatTop® modular chains
• Assembly of Part. 559
Gap
CHAIN GUIDE PROFILES PROFILI GUIDA-CATENA
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
64026*61056
61036*
696161*
8 9
Conveyor Components Conveyor Components
REX
REX
REX
REX
1,5
20 3 2043
103
8,520
2316
40
8,5
20
10
23
1,5 16 Part. 550page 11
Part. 592page 37
1,5
8,5
20
30
3
19
20
h
d8,21,
215
s16,8
M6x80
Self-locking nut
20
65
60Df
Part. 371 - Code 64026 (M6 version).
Part. 179page 36
Tube dia. 38 mmM6
Tube dia. 38
Part. 371
Part.371
P+ 6 0
H+ 1 0
500
P
82,5 5,5
50 88 50
42,1 4345
Part. 261
Part. 243
Part. 366
Part. 243
Part. 367
82,5 2,5
50 85 50
42,1 4345
Part. 261
Part. 243
82,5 1
50 83,5 50
42,144
43Part. 367
Part. 261
114,3 5,7
120
42,1 43Part. 366
152,4 5,6
158
42,1 43
Part. 241
Part. 366
Part. 241
Part. 244Part. 367
Part. 368
Part. 262
500
Part. 366
Part. 367
Part. 368
1,10
- Use : see Fig. 18-19-22-23.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 36 metres.- Accessories :
Part. Colour CodeLengthmetres
Green36366
64056M69585M
Weightkg/m
- Use : see Fig. 17-20-21.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 36 metres.- Accessories :
1,10
Part. Colour CodeLengthmetres
Green36367
64046M69615M
Weightkg/m
- Use : recommended with MatTop ® chains in abrasive environment / high speed / high temperature. See Fig. 22-23. - Packaging : 36 metres.
0,90
Part. CodeLengthmetres
36368
6406669645
Weightkg/m
Accessories
Part. Code
371
Part. 371 (M6 version) shall be used to assemble wear stripson Part. 559.
- Use : when applied to the metal profile, this product improves guide cleanliness.- Material : rubber EPDM 80 (black).- Standard packaging : coil.- Packaging : 20 metres.
- Use : easy assembly of wear strips on frame. Assembly with M6 or M8 hexagon bolt.- Material : reinforced polyamide PA FV (black).- Packaging : 100 pieces.
6,2 ( for screws M 6)8,1 (for screws M 8)
4,56
10,213,2
dmm
hmm
Hexagons
mm
- Use : easy assembly of wear strips on tube dia. 38 mm.- Material : clamp in reinforced polyamide PA FV (black). Bolts and nuts in stainless steel AISI 304.- Packaging : 50 pieces.
370
Part. Code
559 Ø 38
Part.
Bore dia.Df
mm Code
Part. 366-367-368
Part. 371
Part. 371
Part. 370
Part. 559
Part. 366 367 368
Part. 366-367-368
Chain guide profile
Chain guide profile
Chain guide profile
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in stainless steel AISI 304.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection of Part. 366-367-368
Defle
ctio
n (m
m)
Load P (Newton)800600 1000 1200400
1
2
3
Mounting block
Sealing profile
Fixing clamp
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 17 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 18 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 19 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 20 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 21 - Chain width 152,4 mm (K 600) / Pitch 158 mm
Fig. 22 - Parallel wear strips. Reccomended with medium- light loads.
Fig. 23 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
Chain inlet guide shoe centre Part.550. See page 10.
Chain inlet guide shoe centre Part.550. See page 11.
• MatTop® modular chains
• Assembly of Part. 559
Gap
CHAIN GUIDE PROFILES PROFILI GUIDA-CATENA
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
64026*61056
61036*
696161*
10 11
Conveyor Components Conveyor Components
REX
REX
REX
REX
2070
Metalsheetthickness2÷4 110
2010
13,5
13
17
45 20
Left
Right
Section A-A
Screw M5A
45
3
Pitch chain
H
45
side frame edge
27,5
*9
Part. 551 left
2÷4
A
Travel
Part. 261 - 243 - 244
Part. 551 right
B
B
82,5
42,14527,5
100
C
C
Section B-B
Section C-C Section C- C Section C-C
2÷4
27,5 4527,5
33
45 27,5
3
45
Part.243 Part. 244 (20x3)
Part.551
Part.551
Part.550
Part.261
27,5
3
Chain guide profilePart. 261-243 -244
82,5 1
50 83,5 50
Part.367Part.261
42,144
43
Part. 551 left
Part. 551 right
Part. 261-243-244
Travel
B
B
Section B-B
10
166,
5
20 17
2045
40
40
16 10
70 25* 50
Section A-A
Part. 367
Screw Hexag.M6
Part. 550
A
A
Chain guide profile Part. 367
Part.367
44
Part. 550689491
Part. 367
Part.550689491
45103
40
166,
5
20 17
2045
20 20343
43
16 10
70 25* 50
Section A-A
Part. 366
Screw Hexag. M6
Part. 550
A
A
82,5 5,5
50 88 50
Part.366Part.261
42,145
43
Chain guide profile Part. 366
Part. 366
Part. 551 left
Part. 551 right
Part. 261-243-244
Travel
B
B
Section B-B
Part. 550689481
Part. 366
( See
pag
e 14
4 )
Pitch chain
H
45
( See
pag
e 14
4 )
Pitch chain
H
45
( See
pag
e 14
4 )
Part. 367
Part. 592page 37
Part.550
Part. 551 Part. 550
• Fig. 24 - Example of application of Part. 551 in single strand conveyor / Chain width 82,5 mm (K325).
• Fig. 25 - Example of application of Part. 550, in multiple strand conveyor / Chain width 82,5 mm (K325) / Pitch 88 mm.
Chain inlet guide shoe (side)
- Use : can be used in combination with Part. 261-243- 244. See Fig. 24-25-26.- Material : polyamide PA (black).- Packaging : 25 left + 25 right.
551 Left + right 0,025689501
Part.Weight
kgState of supply Code Types of wear strips that can be used with guide shoe Part. 551 (only thickness 3 mm).
Positioning
550
Part. Code
- Use : can be used in combination with Part. 367. See Fig. 26.- Material : polyamide PA (black).- Packaging : 50 pieces
0,042
Weightkg
689491
• Fig. 27 - Example of use of Part. 550 in a MatTop ® conveyor.
*= This dimension can be different according to the type of wear strip ( see sections C-C).
Part. 550
550 689481
Part. Code
* = Plastic profile is protruding from metal profile of about 25 mm.
* = Plastic profile is protruding from metal profile of about 25 mm.
- Use : can be used in combination with Part. 366. See Fig. 25.- Material : polyamide PA (black).- Packaging : 50 pieces.
0,042
Weightkg
Positioning
Positioning
Chain inlet guide shoe (centre)
Chain inlet guide shoe (centre)• Use for Part. 550-551 In TableTop® conveyors, chain inlet guide shoes shall be used near the idlers ( see fig. 24-25-26). In MatTop® conveyors can be used near the sprockets too ( see fig. 27).
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Accessories Accessories
• Fig. 26 - Example of application of Part. 550, in multiple strand conveyor / Chain width 82,5 mm (K325) / Pitch 83,5 mm.
10 11
Conveyor Components Conveyor Components
REX
REX
REX
REX
2070
Metalsheetthickness2÷4 110
2010
13,5
13
17
45 20
Left
Right
Section A-A
Screw M5A
45
3
Pitch chain
H
45
side frame edge
27,5
*9
Part. 551 left
2÷4
A
Travel
Part. 261 - 243 - 244
Part. 551 right
B
B
82,5
42,14527,5
100
C
C
Section B-B
Section C-C Section C- C Section C- C
2÷4
27,5 4527,5
33
45 27,5
3
45
Part.243 Part. 244 (20x3)
Part.551
Part.551
Part.550
Part.261
27,5
3
Chain guide profilePart. 261-243 -244
82,5 1
50 83,5 50
Part.367Part.261
42,144
43
Part. 551 left
Part. 551 right
Part. 261-243-244
Travel
B
B
Section B-B
10
166,
5
20 17
2045
40
40
16 10
70 25* 50
Section A-A
Part. 367
Screw Hexag.M6
Part. 550
A
A
Chain guide profile Part. 367
Part.367
44
Part. 550689491
Part. 367
Part.550689491
45103
40
166,
5
20 17
2045
20 20343
43
16 10
70 25* 50
Section A-A
Part. 366
Screw Hexag. M6
Part. 550
A
A
82,5 5,5
50 88 50
Part.366Part.261
42,145
43
Chain guide profile Part. 366
Part. 366
Part. 551 left
Part. 551 right
Part. 261-243-244
Travel
B
B
Section B-B
Part. 550689481
Part. 366
( See
pag
e 14
4 )
Pitch chain
H
45
( See
pag
e 14
4 )
Pitch chain
H
45
( See
pag
e 14
4 )
Part. 367
Part. 592page 37
Part.550
Part. 551 Part. 550
• Fig. 24 - Example of application of Part. 551 in single strand conveyor / Chain width 82,5 mm (K325).
• Fig. 25 - Example of application of Part. 550, in multiple strand conveyor / Chain width 82,5 mm (K325) / Pitch 88 mm.
Chain inlet guide shoe (side)
- Use : can be used in combination with Part. 261-243- 244. See Fig. 24-25-26.- Material : polyamide PA (black).- Packaging : 25 left + 25 right.
551 Left + right 0,025689501
Part.Weight
kgState of supply Code Types of wear strips that can be used with guide shoe Part. 551 (only thickness 3 mm).
Positioning
550
Part. Code
- Use : can be used in combination with Part. 367. See Fig. 26.- Material : polyamide PA (black).- Packaging : 50 pieces
0,042
Weightkg
689491
• Fig. 27 - Example of use of Part. 550 in a MatTop ® conveyor.
*= This dimension can be different according to the type of wear strip ( see sections C-C).
Part. 550
550 689481
Part. Code
* = Plastic profile is protruding from metal profile of about 25 mm.
* = Plastic profile is protruding from metal profile of about 25 mm.
- Use : can be used in combination with Part. 366. See Fig. 25.- Material : polyamide PA (black).- Packaging : 50 pieces.
0,042
Weightkg
Positioning
Positioning
Chain inlet guide shoe (centre)
Chain inlet guide shoe (centre)• Use for Part. 550-551 In TableTop® conveyors, chain inlet guide shoes shall be used near the idlers ( see fig. 24-25-26). In MatTop® conveyors can be used near the sprockets too ( see fig. 27).
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Accessories Accessories
• Fig. 26 - Example of application of Part. 550, in multiple strand conveyor / Chain width 82,5 mm (K325) / Pitch 83,5 mm.
12 13
Conveyor Components Conveyor Components
Part. 356*
Part. 356*
Part. 310Part. 216
11,2
A
H
S
19,05 12,7
Ø11
,91
11,2
17
37
2
40
8
7,5
17
21
2
20 3 20
43
17
9 21
82,
5
2
A
19 9,5
12
ø 8,122
Part. 215
M8
Part. 310-356-223-274
38
10,05 11,68
Ø12
,07
82,5 5,5
50 88 50
42,1 4345
Part. 310Part. 215*
82,5 2,5
50 85 50
42,145
82,5 1
50 83,5 50
42,144
P+ 6 0
H+ 1 0
500
P
Part. 261
Part. 261
Part. 261
Part. 244Part. 356
Part. 262
Part. 215
Part. 241
Part. 251
Part. 261
Part. 26282,5-114,3-152,4
31,75
Part. 223
254 -304,8
31,7534,6
Part. 262
Part. 223
Part.386
Part.216
Part. 243
Part. 243
Part. 243
500
*= Only with chains 812- 815-820-831
*= Only with chains 812- 815-820-831
Part. 310
Part. 356
Part. 223
Part. 274
Part. 215
Part.
223
Lengthmetres
363
Metal profilematerial
Stainless steel AISI 304
Stainless steel AISI 304
Zinc plated steel
ThicknessS
mm
1,5610316940263971
267123
- Use : see Fig. 33-34.- Colour : white.- Packaging : 24 metres ( in 3 m lengths). 48 metres ( in 6 m lengths ).
0,95White
Part. Colour CodeLengthmetres
36310
6561269412
Weightkg/m
- Use : see Fig. 28.- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
- Use : see Fig. 29-30-31-32.- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
0,89White
Part. Colour CodeLengthmetres
36356
6160561615
Weightkg/m
0,54
Weightkg/mCode
0,79White
Part. Colour CodeLengthmetres
3274 66801
Weightkg/m
- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
36
215For Part. 223 (with S= 1,5)For Part. 223 (with S= 2) -274-310-356
6012165976
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part. Use Code
ANSI 60 American series roller chain (pitch 19,05 mm, roller Ø 11,91 mm, internal width 12,7 mm).
• Use of Part. 215
• Use of Part. 274 ISO 12 B1 European series roller chains with straight connections (pitch 10,05 mm, roller Ø 12,07 mm, internal width 11,68 mm).
Continues
*= This clamp can be used only with chains 812-815-820-831
Chain guide profile Chain guide profile
Chain guide profile
Clamp
Chain guide profile
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in stainless steel AISI 304 or zinc plated steel.
• Linear expansion coefficient 4 x 10. -5
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection of Part. 223-310-356
Defle
ctio
n (m
m)
Load P (Newton)
Gap
300200 400 500
S= 1,5
S= 2
100
1
3
1210
5
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 28 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 29 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 30 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
Fig. 33 - Chain width 82,5 mm (K 325), 114,3 mm (K 450), 152,4 mm (K 600)
Fig. 34 - Chain width 254 mm (K 1000), 304,8 mm (K 1200)
A = 16,5 mm (with S = 1,5)A = 17 mm (with S = 2)
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Fig. 31 - Parallel wear strips. Reccomended with medium-light loads.
Fig. 32 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
• MatTop® modular chains
• Use of Part. 223
PlateTop chains series 1874-4874-1873
Accessories
61743*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
12 13
Conveyor Components Conveyor Components
Part. 356*
Part. 356*
Part. 310Part. 216
11,2
A
H
S
19,05 12,7
Ø11
,91
11,2
17
37
240
8
7,5
17
21
2
20 3 20
43
17
9 21
82,
5
2
A
19 9,5
12
ø 8,122
Part. 215
M8
Part. 310-356-223-274
38
10,05 11,68
Ø12
,07
82,5 5,5
50 88 50
42,1 4345
Part. 310Part. 215*
82,5 2,5
50 85 50
42,145
82,5 1
50 83,5 50
42,144
P+ 6 0
H+ 1 0
500
P
Part. 261
Part. 261
Part. 261
Part. 244Part. 356
Part. 262
Part. 215
Part. 241
Part. 251
Part. 261
Part. 26282,5-114,3-152,4
31,75
Part. 223
254 -304,8
31,7534,6
Part. 262
Part. 223
Part.386
Part.216
Part. 243
Part. 243
Part. 243
500
*= Only with chains 812- 815-820-831
*= Only with chains 812- 815-820-831
Part. 310
Part. 356
Part. 223
Part. 274
Part. 215
Part.
223
Lengthmetres
363
Metal profilematerial
Stainless steel AISI 304
Stainless steel AISI 304
Zinc plated steel
ThicknessS
mm
1,5610316940263971
267123
- Use : see Fig. 33-34.- Colour : white.- Packaging : 24 metres ( in 3 m lengths). 48 metres ( in 6 m lengths ).
0,95White
Part. Colour CodeLengthmetres
36310
6561269412
Weightkg/m
- Use : see Fig. 28.- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
- Use : see Fig. 29-30-31-32.- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
0,89White
Part. Colour CodeLengthmetres
36356
6160561615
Weightkg/m
0,54
Weightkg/mCode
0,79White
Part. Colour CodeLengthmetres
3274 66801
Weightkg/m
- Material : metal profile in stainless steel AISI 304.- Packaging : 24 metres.
36
215For Part. 223 (with S= 1,5)For Part. 223 (with S= 2) -274-310-356
6012165976
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part. Use Code
ANSI 60 American series roller chain (pitch 19,05 mm, roller Ø 11,91 mm, internal width 12,7 mm).
• Use of Part. 215
• Use of Part. 274 ISO 12 B1 European series roller chains with straight connections (pitch 10,05 mm, roller Ø 12,07 mm, internal width 11,68 mm).
Continues
*= This clamp can be used only with chains 812- 815-820-831
Chain guide profile Chain guide profile
Chain guide profile
Clamp
Chain guide profile
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in stainless steel AISI 304 or zinc plated steel.
• Linear expansion coefficient 4 x 10. -5
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ). In hot water (+ 70 °C ).
• Position of guides. See page 144.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection of Part. 223-310-356
Defle
ctio
n (m
m)
Load P (Newton)
Gap
300200 400 500
S= 1,5
S= 2
100
1
3
1210
5
• TableTop® chains series 812 - 815 - 820 - 831 - 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 28 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 29 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 30 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
Fig. 33 - Chain width 82,5 mm (K 325), 114,3 mm (K 450), 152,4 mm (K 600)
Fig. 34 - Chain width 254 mm (K 1000), 304,8 mm (K 1200)
A = 16,5 mm (with S = 1,5)A = 17 mm (with S = 2)
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Fig. 31 - Parallel wear strips. Reccomended with medium-light loads.
Fig. 32 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
• MatTop® modular chains
• Use of Part. 223
PlateTop chains series 1874-4874-1873
Accessories
61743*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
14 15
Conveyor Components Conveyor Components
40
10
8,216,4
13,5
11,5
4,5
23
M 8
P+ 6 0
H+ 1 0
500
P
A
17
M6
1713 2
3 m
in
M8
714
18,5
28,525
Part. 216
Part. 223-274-310-356
Part. 275
Part. 223-274-310-356
Assembly with M8 hexagon bolt
Part.422
82,5 2,5
50 85 50
42,1 4345
Part. 261
82,5 1
50 83,5 50
42,144
43
Part. 422
Part. 261
Part. 244Part.422
Part. 262
Part. 243
Part. 243
500
Part. 422
Part. Colour CodeLengthmetres
Green422
Weightkg/m
0,736
65248M65258M
Part. 216
Part. 275
216For Part. 223 (with S= 1,5)For Part. 223 (with S= 2)-274-310-356
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : stainless steel AISI 304.- Packaging : 50 pieces.
275For Part. 223 (with S=1,5 e 2) -274 -310 -356 66811
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : body in acetal resin POM (black), bolt in stainless steel AISI 304.- Packaging : 100 pieces.
Part. Use Code
Part. Use Code
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in anodized aluminium.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ).
• Position of guides. See page 144.
• Not recommended in wet conveyors To avoid corrosion in contact with cleaning agents.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection
Defle
ctio
n (m
m)
Load P (Newton)
Gap
- Use : see Fig. 35- 36- 37- 38.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 48 metres
Clamp
Clamp
A = 16,5 mm (with S = 1,5)A = 17 mm (with S = 2)
• Assembly of Part. 216
• Assembly of Part. 275
- Use : when applied to the metal profile, this product improves guide cleanliness.- Material : rubber EPDM 80 (black).- Standard packaging : coil.- Packaging : 20 metres.
370
Part. Code
Part. 370Sealing profile
Chain guide profile
600400 800 1000200
1
2
3
5
4
• TableTop® chains series 812 - 815 - 820 - 831- 881TAB - 8811TAB - 879TAB - 880TAB
Fig. 35 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 36 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
In alluminium
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Accessories
Accessories
Fig. 38 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
Fig. 37 - Parallel wear strips. Reccomended with medium-light loads.
• MatTop® modular chains
.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
61036*
60131*64244
14 15
Conveyor Components Conveyor Components
40
10
8,216,4
13,5
11,5
4,5
23
M 8
P+ 6 0
H+ 1 0
500
P
A
17
M6
1713 2
3 m
in
M8
714
18,5
28,525
Part. 216
Part. 223-274-310-356
Part. 275
Part. 223-274-310-356
Assembly with M8 hexagon bolt
Part.422
82,5 2,5
50 85 50
42,1 4345
Part. 261
82,5 1
50 83,5 50
42,144
43
Part. 422
Part. 261
Part. 244Part.422
Part. 262
Part. 243
Part. 243
500
Part. 422
Part. Colour CodeLengthmetres
Green422
Weightkg/m
0,736
65248M65258M
Part. 216
Part. 275
216For Part. 223 (with S= 1,5)For Part. 223 (with S= 2)-274-310-356
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : stainless steel AISI 304.- Packaging : 50 pieces.
275For Part. 223 (with S=1,5 e 2) -274 -310 -356 66811
- Use : easy assembly of guide profiles Part. 310-356- 223-274.- Material : body in acetal resin POM (black), bolt in stainless steel AISI 304.- Packaging : 100 pieces.
Part. Use Code
Part. Use Code
• Material Plastic profile in polyethylene UHMWPE with molecular density 5.600.000. Metal profile in anodized aluminium.
• Linear expansion coefficient 2 x 10. -4
Calculation of thermal expansion see page 141.
• Operating temperature In air ( - 40 to + 80 °C ).
• Position of guides. See page 144.
• Not recommended in wet conveyors To avoid corrosion in contact with cleaning agents.
• Head joint Head joint shall be made with a 45° cut to avoid steps and guarantee chain smooth mouvement. With temperature encrease it is necessary to leave a gap wide enough to allow for thermal elongation of plastic parts.
• Deflection
Defle
ctio
n (m
m)
Load P (Newton)
Gap
- Use : see Fig. 35- 36- 37- 38.- Standard packaging : the plastic and metal profiles are supplied assembled.- Packaging : 48 metres
Clamp
Clamp
A = 16,5 mm (with S = 1,5)A = 17 mm (with S = 2)
• Assembly of Part. 216
• Assembly of Part. 275
- Use : when applied to the metal profile, this product improves guide cleanliness.- Material : rubber EPDM 80 (black).- Standard packaging : coil.- Packaging : 20 metres.
370
Part. Code
Part. 370Sealing profile
Chain guide profile
600400 800 1000200
1
2
3
5
4
• TableTop® chains series 812 - 815 - 820 - 831- 881TAB - 8811TAB - 879TAB - 880 TAB
Fig. 35 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 36 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
In alluminium
CHAIN GUIDE PROFILES CHAIN GUIDE PROFILES
Accessories
Accessories
Fig. 38 - CHEVRON pattern. Recommended with high loads (accumulation tables). Chain wear is evenly distributed throughout the width.
Fig. 37 - Parallel wear strips. Reccomended with medium-light loads.
• MatTop® modular chains
.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
61036*
60131*64244
16 17
Conveyor Components Conveyor Components
a120
00
a 1
h4
a 1
2000
b 1
a1
h1h2
10°
b1
a1
L L
L L
a 1
h2 h1
h4
10°
ea2 = a1 + e
r1
r2
90°r1
90°
a2
b1
a1
a1
h2 h1
h4
10°
ea2 = a1 + e
r1
r2
90°r1
90°
a2
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0Series SSU
881
Return plateTrack
h1mm
h2mm
h4mm
b1mmType of chain Track Return plate
100
130
41,4 25 17 15
41,4 25 17 15
SSU 013
SSU 018
SSU 013 P
SSU 018 P
880-K325881-K3258811-K325880-K450881-K4508811-K450
82,5
114,3
Chainwidthmm
CodeCode
8811 880 882
Code
Series KSU Series KSU 200
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
Widtha1
mmState of supply
Pitche
mmb1
mm
± 0.5h1
mmh2
mmh4
mm
100 25 90161841,4 KSU 013 500...
KSU 013 500...S
880-K325881-K3258811-K325880-K450881-K4508811-K450
Radiusr1
mmType of chain
Chainwidth
mm
500Without the L sections
With the L sections 82,5
881-K7508811-K750
Lmm
_
100 25 151741,4 50
125 25 120161841,4 KSU 018 610...
KSU 018 610...S610
Without the L sections
With the L sections 114,3
_
130 25 151741,4 50
200 25 195161841,4 KSU 030 610...
KSU 030 610...S610
Without the L sections
With the L sections 190,5
_
210 25 151741,4 50
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KSU 013500 1
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. • Special dimensions on application.• When ordering indicate the No. of strands required: KSU 218 610 1
Code
Widtha1
mm
Pitche
mmb1
mm
± 0.5h1
mmh2
mmh4
mm
125 27 120162158 KSU 218 610...882 - K450
882 - K750
Radiusr1
mmType of chain
Chainwidth
mm
610114,3
882 -K1000
200 27 195162158 KSU 230 610...610190,5
265 27 260162158 KSU 240 610...610254
Code No. of strands
Code No. of strands
Widtha1
mm
* = To be specified upon order.
*
*
*
Corner tracks and straighttracks for TableTop® Series : • 881• 8811• 880
Corner tracks for TableTop® Series : • 882
Corner tracks Corner tracks
Straight tracks
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
16 17
Conveyor Components Conveyor Components
a1
2000
a 1
h4
a 1
2000
b 1
a1
h1h2
10°
b1
a1
L L
L L
a 1
h2 h1
h4
10°
ea2 = a1 + e
r1
r2
90°r1
90°
a2
b1
a1
a1
h2 h1
h4
10°
ea2 = a1 + e
r1
r2
90°r1
90°
a2
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0Series SSU
881
Return plateTrack
h1mm
h2mm
h4mm
b1mmType of chain Track Return plate
100
130
41,4 25 17 15
41,4 25 17 15
SSU 013
SSU 018
SSU 013 P
SSU 018 P
880-K325881-K3258811-K325880-K450881-K4508811-K450
82,5
114,3
Chainwidthmm
CodeCode
8811 880 882
Code
Series KSU Series KSU 200
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
Widtha1
mmState of supply
Pitche
mmb1
mm
± 0.5h1
mmh2
mmh4
mm
100 25 90161841,4 KSU 013 500...
KSU 013 500...S
880-K325881-K3258811-K325880-K450881-K4508811-K450
Radiusr1
mmType of chain
Chainwidth
mm
500Without the L sections
With the L sections 82,5
881-K7508811-K750
Lmm
_
100 25 151741,4 50
125 25 120161841,4 KSU 018 610...
KSU 018 610...S610
Without the L sections
With the L sections 114,3
_
130 25 151741,4 50
200 25 195161841,4 KSU 030 610...
KSU 030 610...S610
Without the L sections
With the L sections 190,5
_
210 25 151741,4 50
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KSU 013 500 1
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. • Special dimensions on application.• When ordering indicate the No. of strands required: KSU 218 610 1
Code
Widtha1
mm
Pitche
mmb1
mm
± 0.5h1
mmh2
mmh4
mm
125 27 120162158 KSU 218 610...882 - K450
882 - K750
Radiusr1
mmType of chain
Chainwidth
mm
610114,3
882 -K1000
200 27 195162158 KSU 230 610...610190,5
265 27 260162158 KSU 240 610...610254
Code No. of strands
Code No. of strands
Widtha1
mm
* = To be specified upon order.
*
*
*
Corner tracks and straighttracks for TableTop® Series : • 881• 8811• 880
Corner tracks for TableTop® Series : • 882
Corner tracks Corner tracks
Straight tracks
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
18 19
Conveyor Components Conveyor Components
a1
2000
a1
L L
L L
r1
r2
90°r1
90°
a2
b1
b2
a1
h1h2 h3 e
a2 = a1 + ee
a2 = a1 + eb1
b2
a1
h1h2 h3
b 1
b2
a1
h1h2 h3
a1
r1
90°
a1
2000
b 1
b2
a1
h1h2 h3
r1
r2
90°
a2
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0
Series STU Series STU 200
Code
Series KTU Series KTU 200
Widtha1
mmState of supply
Pitche
mmb1
mm
± 0.5b2
mmh1
mmh2
mm
100 70 90182545 KTU 013 500...
KTU 013 500...S
879TAB-K325880TAB-K3258811TAB-K325879TAB-K450880TAB-K450880TAB-K4548811TAB-K450
Radiusr1
mmType of chain
Chainwidth
mm
500Without the L sections
With the L sections 82,5
8811TAB-K750
Lmm
_
100 67 182545 50
125 70 120182545 KTU 018 610...
KTU 018 610...S610
Without the L sections
With the L sections 114,3
_
130 67 182545 50
200 70 195182545 KTU 030 610...
KTU 030 610...S610
Without the L sections
With the L sections 190,5
_
210 67 18
h3mm
9,5
10,5
9,5
10,5
9,5
10,52545 50
Code
130 84 243060 KTU 218 610...S882TAB-K450
Type of chain
610114,3 15
210 84 243060 KTU 230 610...S882TAB-K750 610190,5 15
270 84 243060 KTU 240 610...S882TAB-K1000 610254 15
320 84 243060 KTU 248 610...S882TAB-K1200 610304,8 15
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 67 182545 STU 013
879TAB-K325879BO-K325880TAB-K3258811TAB-K325
Type of chain
Chainwidth
mm
82,5
130 67 182545 STU 018114,3
h3mm
10,5
10,5
879TAB-K450879BO-K450880TAB-K4508811TAB-K450
Suitable also with chains type:- SSC 8811 TAB Rubber Top
- 880 TAB-K454- HFP 880 TAB- 879 BO- 880 BO- HFP 880 BOT
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
130 84 243060 STU 218882TAB-K450
Type of chain
Chainwidth
mm
114,3
h3mm
15210 84 243060 STU 230882TAB-K750 190,5 15
270 84 243060 STU 240882TAB-K1000 254 15
320 84 243060 STU 248882TAB-K1200 304,8 15
879 TAB-880 TAB
* = To be specified upon order.
*
*
*
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
Radiusr1
mm
Pitche
mm
Chainwidth
mmh3
mm
* = To be specified upon order.
*
*
*
*
Corner tracks
Straight tracks
Corner tracks
Straight tracks
8811 TAB 882 TAB
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
Suitable also with chains type:- HFP 882 TAB- HFP 882 TAB F- RR 882
Corner tracks and straighttracks for TableTop® Series : • 8811 TAB• 879 TAB• 880 TAB
Corner tracks and straighttracks for TableTop® Series : • 882 TAB
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 013500 1
Code No. of strands
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU218 610 1 S
Code No. of strands
18 19
Conveyor Components Conveyor Components
a1
2000
a1
L L
L L
r1
r2
90°r1
90°
a2
b1
b2
a1
h1h2 h3 e
a2 = a1 + ee
a2 = a1 + eb1
b2
a1
h1h2 h3
b 1
b2
a1
h1h2 h3
a1
r1
90°
a1
2000
b 1
b2
a1
h1h2 h3
r1
r2
90°
a2
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0
Series STU Series STU 200
Code
Series KTU Series KTU 200
Widtha1
mmState of supply
Pitche
mmb1
mm
± 0.5b2
mmh1
mmh2
mm
100 70 90182545 KTU 013 500...
KTU 013 500...S
879TAB-K325880TAB-K3258811TAB-K325879TAB-K450880TAB-K450880TAB-K4548811TAB-K450
Radiusr1
mmType of chain
Chainwidth
mm
500Without the L sections
With the L sections 82,5
8811TAB-K750
Lmm
_
100 67 182545 50
125 70 120182545 KTU 018 610...
KTU 018 610...S610
Without the L sections
With the L sections 114,3
_
130 67 182545 50
200 70 195182545 KTU 030 610...
KTU 030 610...S610
Without the L sections
With the L sections 190,5
_
210 67 18
h3mm
9,5
10,5
9,5
10,5
9,5
10,52545 50
Code
130 84 243060 KTU 218 610...S882TAB-K450
Type of chain
610114,3 15
210 84 243060 KTU 230 610...S882TAB-K750 610190,5 15
270 84 243060 KTU 240 610...S882TAB-K1000 610254 15
320 84 243060 KTU 248 610...S882TAB-K1200 610304,8 15
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 67 182545 STU 013
879TAB-K325879BO-K325880TAB-K3258811TAB-K325
Type of chain
Chainwidth
mm
82,5
130 67 182545 STU 018114,3
h3mm
10,5
10,5
879TAB-K450879BO-K450880TAB-K4508811TAB-K450
Suitable also with chains type:- SSC 8811 TAB Rubber Top
- 880 TAB-K454- HFP 880 TAB- 879 BO- 880 BO- HFP 880 BOT
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
130 84 243060 STU 218882TAB-K450
Type of chain
Chainwidth
mm
114,3
h3mm
15210 84 243060 STU 230882TAB-K750 190,5 15
270 84 243060 STU 240882TAB-K1000 254 15
320 84 243060 STU 248882TAB-K1200 304,8 15
879 TAB-880 TAB
* = To be specified upon order.
*
*
*
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
Radiusr1
mm
Pitche
mm
Chainwidth
mmh3
mm
* = To be specified upon order.
*
*
*
*
Corner tracks
Straight tracks
Corner tracks
Straight tracks
8811 TAB 882 TAB
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
Suitable also with chains type:- HFP 882 TAB- HFP 882 TAB F- RR 882
Corner tracks and straighttracks for TableTop® Series : • 8811 TAB• 879 TAB• 880 TAB
Corner tracks and straighttracks for TableTop® Series : • 882 TAB
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 013 500 1
Code No. of strands
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU218 610 1 S
Code No. of strands
20 21
Conveyor Components Conveyor Components
b1
a1
h1h2
54
ea2 = a1 + e
r1
r2L
L
90°
15°
7,5°
r1L
L
90°
15°
7,5°
a1
h1h2
ea2 = a1 + e
26,4
10
a 2a1
a1
r1
r2
90°r1
90°
a2
P+ 6 0
H+ 1 0
Only for Series 881 M
b1
a1
h1h2
c
ea2 = a1 + e
r1L
L
90°
a1
L
75 n
35 g
1015
M8
P+ 6 0
H+ 1 0
Code
Code
Series KLPC
Radiusr1
mm
Pitche
mmb1
mm
± 0.5
100
100
111
100
100
55
5555 (63•)
55
55
63
KMU 013 500...*KMU 013 500...L125
KMU 013 500...L100
KMU 013 680...
KMU 013 860...
KMU 113 500...
881M-K325 82,5
500
680
860
-
125
100
100
125
90
89
85
90
90
100881M-K330 83,8 500 100 85
Type of chain
Widtha1
mm
Chainwidthmm
Lmm
h1mm
h2mm
129
129
214
44,2
44,2
44,2
44,2
44,2
44,2
44,2
44,2
44,2
27
27
27
27
27
27
27
27
27
55 (63•)
63
55
KMU 018 500...
KMU 018 610...
KMU 030 610... 881M-K750
881M-K450
190,5
114,3500
610
610
125
125
125
120
120
196
* = Supplied without the L straight-line sections. • = Only for corner tracks of 2 or more strands.
Radiusr1
mm
Pitche
mm
55 (61,9)•
KLPC 013 457...
KLPC 013 500...
KLPC 013 610...
KLPC 013 762...
KLPC 013 914...
KLPC 018 457...
KLPC 018 500...
KLPC 018 610...
KLPC 018 762...
KLPC 018 914...
LPC279-K325
LPC279-K450
82,5
114,3
457
500
610
762
914
457
500
610
762
914
100
100
100
100
100
125
125
125
125
125
27
27
27
27
27
27
27
27
27
27
85
85
85
85
85
116
116
116
116
116
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
Type of chain
Widtha1
mmh1
mmh2
mm
Chainwidth
mm
• = Only for corner tracks of 2 or more strands.
• Guide system LPC™
The reacting couple (M) tends to lift the chain.
In the guide system LPC™ (Low Pin Centerline) the reacting couple (M) tends to keep the chain flat.
= The tension on the chain from the drive motor ( chain pull ).= The resulting force driving the chain against the inner wearstrip in a corner.= The reaction of the corner against the chain.= Reacting couple applied to the chain.
T
F
RM
Series KMU
• This corner track is designed for LPC 279 chains that work according to our patented LPC™ system. This system (low pin centerline) allows for easy maintenance and cleaning because the chain can be easily lifted when the conveyor is stopped. On the other hand it stays flat when working, giving better stability to products. Recommended for high speed conveyors
• TAB Guide
• LPC™Guide
Magnetic corner tracks for TableTop® Series :• 881 M • 880 MG
Corner tracks for TableTop® Series :• LPC 279
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. • When ordering indicate the No. of strands required:
Code No. of strands
KLPC 013 457 1
Magnetic corner tracks Corner tracks
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
881 M LPC 279
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
880 MG
Return guide shoe position
With return guide shoe
Code
Radiusr1
mm
Pitche
mmb1
mm
100 100
100
111
100
100
55
5563
55
55
63
COMBI 013 500...
COMBI 013 500...L125
COMBI 013 500...L100
COMBI 013 680...
COMBI 013 860...
COMBI 113 500...
881M-K325880MG-K325
82,5
500
680
860
125
100
100
125
90
89
85
90
90
100881M-K330 83,8 500 100 85
Type of chain
Widtha1
mm
Chainwidthmm
Lmm
h1mm
h2mm
129
129
214
44
44
44
44
44
44
44
44
44
cmm
50
50
50
50
50
50
54
54
54
nmm
Gap 0
Gap 0
20
Gap 0
Gap 0
20
20
20
20
gmm
30
30
20
30
30
20
20
20
20
27
27
27
27
27
27
27
27
27
63
63
55
COMBI 018 500...
COMBI 018 610...
COMBI 030 610... 881M-K750
881M-K450
190,5
114,3500
610
610
125
125
125
120
120
196
Series COMBI Magnetic corner tracks
• Material : polyethylene UHMWPE (black).• Standard packaging: the corner tracks are supplied complete with carry and return sections.
• When ordering indicate the No. of strands required:
Code No. of strands
KMU 013500 1
• Magnetic corner tracks allow for easy maintenance and cleaning because the chain can be easily lifted when the conveyor is stopped. On the other hand they keep the chain flat when working.
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
20 21
Conveyor Components Conveyor Components
b1
a1
h1h2
54
ea2 = a1 + e
r1
r2L
L
90°
15°
7,5°
r1L
L
90°
15°
7,5°
a1
h1h2
ea2 = a1 + e
26,4
10
a 2a1
a1
r1
r2
90°r1
90°
a2
P+ 6 0
H+ 1 0
Only for Series 881 M
b1
a1
h1h2
c
ea2 = a1 + e
r1L
L
90°
a1
L
75 n
35 g
1015
M8
P+ 6 0
H+ 1 0
Code
Code
Series KLPC
Radiusr1
mm
Pitche
mmb1
mm
± 0.5
100
100
111
100
100
55
5555 (63•)
55
55
63
KMU 013 500...*KMU 013 500...L125
KMU 013 500...L100
KMU 013 680...
KMU 013 860...
KMU 113 500...
881M-K325 82,5
500
680
860
-
125
100
100
125
90
89
85
90
90
100881M-K330 83,8 500 100 85
Type of chain
Widtha1
mm
Chainwidthmm
Lmm
h1mm
h2mm
129
129
214
44,2
44,2
44,2
44,2
44,2
44,2
44,2
44,2
44,2
27
27
27
27
27
27
27
27
27
55 (63•)
63
55
KMU 018 500...
KMU 018 610...
KMU 030 610... 881M-K750
881M-K450
190,5
114,3500
610
610
125
125
125
120
120
196
* = Supplied without the L straight-line sections. • = Only for corner tracks of 2 or more strands.
Radiusr1
mm
Pitche
mm
55 (61,9)•
KLPC 013 457...
KLPC 013 500...
KLPC 013 610...
KLPC 013 762...
KLPC 013 914...
KLPC 018 457...
KLPC 018 500...
KLPC 018 610...
KLPC 018 762...
KLPC 018 914...
LPC279-K325
LPC279-K450
82,5
114,3
457
500
610
762
914
457
500
610
762
914
100
100
100
100
100
125
125
125
125
125
27
27
27
27
27
27
27
27
27
27
85
85
85
85
85
116
116
116
116
116
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
55 (61,9)•
Type of chain
Widtha1
mmh1
mmh2
mm
Chainwidth
mm
• = Only for corner tracks of 2 or more strands.
• Guide system LPC™
The reacting couple (M) tends to lift the chain.
In the guide system LPC™ (Low Pin Centerline) the reacting couple (M) tends to keep the chain flat.
= The tension on the chain from the drive motor ( chain pull ).= The resulting force driving the chain against the inner wearstrip in a corner.= The reaction of the corner against the chain.= Reacting couple applied to the chain.
T
F
RM
Series KMU
• This corner track is designed for LPC 279 chains that work according to our patented LPC™ system. This system (low pin centerline) allows for easy maintenance and cleaning because the chain can be easily lifted when the conveyor is stopped. On the other hand it stays flat when working, giving better stability to products. Recommended for high speed conveyors
• TAB Guide
• LPC™Guide
Magnetic corner tracks for TableTop® Series :• 881 M • 880 MG
Corner tracks for TableTop® Series :• LPC 279
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. • When ordering indicate the No. of strands required:
Code No. of strands
KLPC 013 457 1
Magnetic corner tracks Corner tracks
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
881 M LPC 279
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
880 MG
Return guide shoe position
With return guide shoe
Code
Radiusr1
mm
Pitche
mmb1
mm
100 100
100
111
100
100
55
5563
55
55
63
COMBI 013 500...
COMBI 013 500...L125
COMBI 013 500...L100
COMBI 013 680...
COMBI 013 860...
COMBI 113 500...
881M-K325880MG-K325
82,5
500
680
860
125
100
100
125
90
89
85
90
90
100881M-K330 83,8 500 100 85
Type of chain
Widtha1
mm
Chainwidthmm
Lmm
h1mm
h2mm
129
129
214
44
44
44
44
44
44
44
44
44
cmm
50
50
50
50
50
50
54
54
54
nmm
Gap 0
Gap 0
20
Gap 0
Gap 0
20
20
20
20
gmm
30
30
20
30
30
20
20
20
20
27
27
27
27
27
27
27
27
27
63
63
55
COMBI 018 500...
COMBI 018 610...
COMBI 030 610... 881M-K750
881M-K450
190,5
114,3500
610
610
125
125
125
120
120
196
Series COMBI Magnetic corner tracks
• Material : polyethylene UHMWPE (black).• Standard packaging: the corner tracks are supplied complete with carry and return sections.
• When ordering indicate the No. of strands required:
Code No. of strands
KMU 013500 1
• Magnetic corner tracks allow for easy maintenance and cleaning because the chain can be easily lifted when the conveyor is stopped. On the other hand they keep the chain flat when working.
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
22 23
Conveyor Components Conveyor Components
b1
b2
a1
h1h2 h3 e
a2 = a1 + e
a1
r1
r2
90°r1
90°
a2
ea2 = a1 + e
r1
r2
90°
a2
b1
b2
a1
h1h2 h3
a1
r1
90°
a1
2000
b 1
b2
a1
h1h2 h3
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0
LBP 883SLBP 882 TAB 1873 1874 - 4874
Series STU200
Code
Series KTU300 Series KTU200
Widtha1
mm
Pitche
mmb1
mm
± 0.5b2
mmh1
mmh2
mm
100 70 90293634,6 KTU 313 500...1873-K3251874-K3254874-K325
1873-K6001874-K6004874-K600
1873-K4501874-K450
Radiusr1
mmType of chain
Chainwidth
mm
50082,5
1873-K7501874-K7504874-K750
1873-K1000
1873-K1200
114,3
152,4
190,5
254
304,8
h3mm
19
125 70 120293634,6 KTU 318 500...500 19
160 70 160293634,6 KTU 324 610...610 19
200 70 195293634,6 KTU 330 610...610 19
260 70 260293634,6 KTU 340 610...610 19
310 70 310293634,6 KTU 348 610...610 19
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
110 84 243060 KTU 215 700...SLBP882TAB-K375SLBP882TAB-K375FLBP882TAB-K375
Radiusr1
mm
Pitche
mmType of chain
Chainwidth
mm
70095,2
h3mm
15
130 84 243060 KTU 218 610...SLBP883TAB-K450 610114,3 15
210 84 243060 KTU 230 610...SLBP883TAB-K750SLBP882TAB-K750
610190,5 15
*
*
*
a1
2000
b 1
b2
a1
h1h2 h3
Suitable also with chains type:- LBP 882 TAB- FLBP 882 TAB
Suitable also with chains type:- 1874 G- 1874 HDG- 1873 G
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
110 84 243060 STU 215LBP882TAB-K375SLBP882TAB-K375FLBP882TAB-K375
Type of chain
Chainwidth
mm
95,2
h3mm
15
130 84 243060 STU 218LBP883TAB-K450 114,3 15
210 84 243060 STU 230LBP883TAB-K750SLBP882TAB-K750
190,5 15
Series STU300
Corner tracks
Straight tracks
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 293634,6 STU 3131873-K3251874-K3254874-K325
1873-K6001874-K6004874-K600
1873-K4501874-K450
Type of chain
Chainwidth
mm
82,5
1873-K7501874-K7504874-K750
1873-K1000
1873-K1200
114,3
152,4
190,5
254
304,8
h3mm
19
125 70 293634,6 STU 31819
160 70 293634,6 STU 32419
200 70 293634,6 STU 33019
260 70 293634,6 STU 34019
310 70 293634,6 STU 34819
Corner tracks
Straight tracks
Corner tracks and straighttracks for PlateTop Series: • 1874• 4874• 1873
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
Corner tracks and straighttracks for low backline pressurechains Series: • SLBP 882 TAB• LBP 883
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 313500 1
Code No. of strands
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 215700 1 S
Code No. of strands
* = To be specified upon order.
22 23
Conveyor Components Conveyor Components
b1
b2
a1
h1h2 h3 e
a2 = a1 + e
a1
r1
r2
90°r1
90°
a2
ea2 = a1 + e
r1
r2
90°
a2
b1
b2
a1
h1h2 h3
a1
r1
90°
a1
2000
b 1
b2
a1
h1h2 h3
P+ 6 0
H+ 1 0
P+ 6 0
H+ 1 0
LBP 883SLBP 882 TAB 1873 1874 - 4874
Series STU200
Code
Series KTU300 Series KTU200
Widtha1
mm
Pitche
mmb1
mm
± 0.5b2
mmh1
mmh2
mm
100 70 90293634,6 KTU 313 500...1873-K3251874-K3254874-K325
1873-K6001874-K6004874-K600
1873-K4501874-K450
Radiusr1
mmType of chain
Chainwidth
mm
50082,5
1873-K7501874-K7504874-K750
1873-K1000
1873-K1200
114,3
152,4
190,5
254
304,8
h3mm
19
125 70 120293634,6 KTU 318 500...500 19
160 70 160293634,6 KTU 324 610...610 19
200 70 195293634,6 KTU 330 610...610 19
260 70 260293634,6 KTU 340 610...610 19
310 70 310293634,6 KTU 348 610...610 19
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
110 84 243060 KTU 215 700...SLBP882TAB-K375SLBP882TAB-K375FLBP882TAB-K375
Radiusr1
mm
Pitche
mmType of chain
Chainwidth
mm
70095,2
h3mm
15
130 84 243060 KTU 218 610...SLBP883TAB-K450 610114,3 15
210 84 243060 KTU 230 610...SLBP883TAB-K750SLBP882TAB-K750
610190,5 15
*
*
*
a1
2000
b 1
b2
a1
h1h2 h3
Suitable also with chains type:- LBP 882 TAB- FLBP 882 TAB
Suitable also with chains type:- 1874 G- 1874 HDG- 1873 G
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
110 84 243060 STU 215LBP882TAB-K375SLBP882TAB-K375FLBP882TAB-K375
Type of chain
Chainwidth
mm
95,2
h3mm
15
130 84 243060 STU 218LBP883TAB-K450 114,3 15
210 84 243060 STU 230LBP883TAB-K750SLBP882TAB-K750
190,5 15
Series STU300
Corner tracks
Straight tracks
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 293634,6 STU 3131873-K3251874-K3254874-K325
1873-K6001874-K6004874-K600
1873-K4501874-K450
Type of chain
Chainwidth
mm
82,5
1873-K7501874-K7504874-K750
1873-K1000
1873-K1200
114,3
152,4
190,5
254
304,8
h3mm
19
125 70 293634,6 STU 31819
160 70 293634,6 STU 32419
200 70 293634,6 STU 33019
260 70 293634,6 STU 34019
310 70 293634,6 STU 34819
Corner tracks
Straight tracks
Corner tracks and straighttracks for PlateTop Series: • 1874• 4874• 1873
CORNER TRACKS AND STRAIGHT TRACKS CORNER TRACKS AND STRAIGHT TRACKS
Corner tracks and straighttracks for low backline pressurechains Series: • SLBP 882 TAB• LBP 883
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 313 500 1
Code No. of strands
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• When ordering indicate the No. of strands required:
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
KTU 215 700 1 S
Code No. of strands
* = To be specified upon order.
24 2925
Conveyor Components Conveyor Components
a1
L
L
r1
90°
b1
b2
a1
h1h2 h3
a 1
2000
b 1
b2
a1
h1h2 h3
Df
121
244
18,7584
14,5
39
6 n.4
R 232
20
82,5
100
750 500
150°
min
500
A B B
Part. 565page 36
82,5 2,5
50 85 50
Part.153
Part.153
P+ 6 0
H+ 1 0
82,5 5,5
50 88 50
Part.153
1700 TAB K - 1701 TAB K 1710 TAB K 1713 TAB K
Series KTU500
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 214058 KTU508250S
KTU508500S1700TABK1701TABK
Radiusr1
mmType of chain
Chainwidth
mm
55
Lmm
250
500
h3mm
12
100 70 214058 12
50
50
110 70 314058 KTU515250S
KTU515500S1710TABK 98
250
500
22
110 70 314058 22
50
50
270 70 30,54058 KTU540500S1713TABK
1700TABK1701TABK
1710TABK
1713TABK
253 500 20 50
Series STU500
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 214058 STU508
Type of chain
Chainwidth
mm
55
h3mm
12
110 70 314058 STU51598 22
270 70 304058 STU540253 20
Part. 153
- Use : see Fig. 39-40-41.- PE polyethylene (green) version can be used both with plastic chains and metal chains. - PA polyamide (black) version is recommended for metal chains. Not recommended for plastic chains because of rapid wear of chain.- Packaging : 15 pieces.
Part. Material Code
Polyethylene PE (green)18 19
153
608692
Polyamide PA (black)20 21
684221
Polyethylene PE (green) 684231
Bore dia.Df
mmShaft dia
mm
• TableTop®chains / PlateTop chains
Fig. 39 - Chain width 82,5 mm (K 325)
A = 1,5 • B
Snap-on assembly
Corner tracks and straighttracks for Multiflex chains Series : • 1700 TAB K • 1701 TAB K • 1710 TAB K • 1713 TAB K
CORNER TRACKS AND STRAIGHT TRACKS
Corner tracks
Straight tracks
ROLLER GUIDES FOR CHAIN RETURN
Wear shoe• Positioning
• Assembly
Fig. 40 - Chain width 82,5 mm (K 325) / Pitch 88 mm Fig. 41 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Shoes can be pinnedtogether
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
24 2925
Conveyor Components Conveyor Components
a1
L
L
r1
90°
b1
b2
a1
h1h2 h3
a 1
2000
b 1
b2
a1
h1h2 h3
Df
121
244
18,7584
14,5
39
6 n.4
R 232
20
82,5
100
750 500
150°
min
500
A B B
Part. 565page 36
82,5 2,5
50 85 50
Part.153
Part.153
P+ 6 0
H+ 1 0
82,5 5,5
50 88 50
Part.153
1700 TAB K - 1701 TAB K 1710 TAB K 1713 TAB K
Series KTU500
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 214058 KTU508250S
KTU508500S1700TABK1701TABK
Radiusr1
mmType of chain
Chainwidth
mm
55
Lmm
250
500
h3mm
12
100 70 214058 12
50
50
110 70 314058 KTU515250S
KTU515500S1710TABK 98
250
500
22
110 70 314058 22
50
50
270 70 30,54058 KTU540500S1713TABK
1700TABK1701TABK
1710TABK
1713TABK
253 500 20 50
Series STU500
Code
Widtha1
mmb1
mmb2
mmh1
mmh2
mm
100 70 214058 STU508
Type of chain
Chainwidth
mm
55
h3mm
12
110 70 314058 STU51598 22
270 70 304058 STU540253 20
Part. 153
- Use : see Fig. 39-40-41.- PE polyethylene (green) version can be used both with plastic chains and metal chains. - PA polyamide (black) version is recommended for metal chains. Not recommended for plastic chains because of rapid wear of chain.- Packaging : 15 pieces.
Part. Material Code
Polyethylene PE (green)18 19
153
608692
Polyamide PA (black)20 21
684221
Polyethylene PE (green) 684231
Bore dia.Df
mmShaft dia
mm
• TableTop®chains / PlateTop chains
Fig. 39 - Chain width 82,5 mm (K 325)
A = 1,5 • B
Snap-on assembly
Corner tracks and straighttracks for Multiflex chains Series : • 1700 TAB K • 1701 TAB K • 1710 TAB K • 1713 TAB K
CORNER TRACKS AND STRAIGHT TRACKS
Corner tracks
Straight tracks
ROLLER GUIDES FOR CHAIN RETURN
Wear shoe• Positioning
• Assembly
Fig. 40 - Chain width 82,5 mm (K 325) / Pitch 88 mm Fig. 41 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Shoes can be pinnedtogether
• Material : polyethylene UHMWPE (black) with molecular density 1.000.000.• Standard packaging: the corner tracks are supplied complete with carry and return sections. Straight tracks are supplied as single profile 2 m long.• Special dimensions on application.
• Linear expansion coefficient : 2 x 10.-4 Calculation of thermal expansion see page 141.• Operating temperature : In air ( -40 to + 80 °C ). In hot water (+ 70 °C ).• Positioning : see page 144.
26 27
Conveyor Components Conveyor Components
227,5
25,5
ø 51
ø 42
,5
Df
Df Df32
ø 27
Version withDf 12,5 - 16,5
Version withDf 18,5 - 20,5
Df
4
ø 42
,5
ø 52
55
25,5 25,5
Df
1,5
ø 42
,5
ø 51
52
25,25 25,25
Df
50,5
ø 42
,5
Df ø 42
,5
27,5
Part. 565page 36
Part. 73 Part. 126 Part. 125
114,3
Part. 73 Part. 126
120
Part. 73 Part. 126
Part. 73 Part. 126 Part. 73
114,3
Part. 73 Part. 126
82,5
100
Part.73 Part.126
82,5 5,5
50 88 50
82,5 2,5
50 85 50
87 1
50 88 50
Part. 73 Part. 126 Part. 125
82,5 1
50 83,5 50
Part. 73 Part. 126 Part. 421
Part. 388 Part. 126 Part. 388
Part. 73
Part. 126 Separator
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
421
- Use : see Fig. 47.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 44. - Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 46.- Material : polyamide PA (black).- Packaging : 100 pieces.
Roller
Dia. 42,5 mm
Dia. 42,5 mmDia. 42,5 mm
Dia. 42,5 mm
Dia. 42,5 mm
Double roller
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12,516,518,520,5
Shaft dia.mm
12161820
12161820
126
Part. 125
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
125
Part. 421
Part. 125
Part. 388
Shaft dia.mm
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
125
Shaft dia.mm
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
388
12,516,518,520,5
12161820
Part. Code
Bore dia.Dfmm
12,516,518,520,5
Shaft dia.mm
12161820
73
- Use : see Fig. 42-43-44-45-46-47. - Material : polyamide PA (black).- Packaging : 100 pieces.
12,516,518,520,5
12161820
- Use : see Fig. 48.- Material : polyamide PA (black).- Packaging : 100 pieces.
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Fig. 44 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 45 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 43 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 42 - Chain width 82,5 mm (K 325)
Double roller
Roller
Roller
Fig. 46 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 48 - Chain width 87 mm (K 343) / Pitch 88 mm
Fig. 47 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Multi strand conveyors, with 82,5 mm width chains and pitch 88 mm, can be modified to convey PET bottles with pethal bottom or other unstable products.Change chains from 82,5 mm to 87 mm width and wear strips, in this way the Gap between chains is reduced from 5,5 mm to 1 mm while the conveyor frame is unchanged. See fig. 16, page 7.
Shaft dia.mm
Shaft dia.mm
50660*6294650670*50680
65396*6540665416*62520
62956*6296662976*62510
66116*6612666136*66146
63858*6386863878*63888
63898*63908*63918*68873
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
26 27
Conveyor Components Conveyor Components
227,5
25,5
ø 51
ø 42
,5
Df
Df Df32
ø 27
Version withDf 12,5 - 16,5
Version withDf 18,5 - 20,5
Df
4
ø 42
,5
ø 52
55
25,5 25,5
Df
1,5
ø 42
,5
ø 51
52
25,25 25,25
Df
50,5ø
42,5
Df ø 42
,5
27,5
Part. 565page 36
Part. 73 Part. 126 Part. 125
114,3
Part. 73 Part. 126
120
Part. 73 Part. 126
Part. 73 Part. 126 Part. 73
114,3
Part. 73 Part. 126
82,5
100
Part.73 Part.126
82,5 5,5
50 88 50
82,5 2,5
50 85 50
87 1
50 88 50
Part. 73 Part. 126 Part. 125
82,5 1
50 83,5 50
Part. 73 Part. 126 Part. 421
Part. 388 Part. 126 Part. 388
Part. 73
Part. 126 Separator
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
421
- Use : see Fig. 47.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 44. - Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 46.- Material : polyamide PA (black).- Packaging : 100 pieces.
Roller
Dia. 42,5 mm
Dia. 42,5 mmDia. 42,5 mm
Dia. 42,5 mm
Dia. 42,5 mm
Double roller
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12,516,518,520,5
Shaft dia.mm
12161820
12161820
126
Part. 125
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
125
Part. 421
Part. 125
Part. 388
Shaft dia.mm
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
125
Shaft dia.mm
Part. Code
Bore dia.Dfmm
12,516,518,520,5
12161820
388
12,516,518,520,5
12161820
Part. Code
Bore dia.Dfmm
12,516,518,520,5
Shaft dia.mm
12161820
73
- Use : see Fig. 42-43-44-45-46-47. - Material : polyamide PA (black).- Packaging : 100 pieces.
12,516,518,520,5
12161820
- Use : see Fig. 48.- Material : polyamide PA (black).- Packaging : 100 pieces.
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Fig. 44 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 45 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 43 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 42 - Chain width 82,5 mm (K 325)
Double roller
Roller
Roller
Fig. 46 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 48 - Chain width 87 mm (K 343) / Pitch 88 mm
Fig. 47 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Multi strand conveyors, with 82,5 mm width chains and pitch 88 mm, can be modified to convey PET bottles with pethal bottom or other unstable products.Change chains from 82,5 mm to 87 mm width and wear strips, in this way the Gap between chains is reduced from 5,5 mm to 1 mm while the conveyor frame is unchanged. See fig. 16, page 7.
Shaft dia.mm
Shaft dia.mm
50660*6294650670*50680
65396*6540665416*62520
62956*6296662976*62510
66116*6612666136*66146
63858*6386863878*63888
63898*63908*63918*68873
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
28 29
Conveyor Components Conveyor Components
41243
ø 50
Df ø 60
ø 50
Df
40
Part. 565page 36
82,5
100
114,3
Part. 126Part. 561
82,5 5,5
50 88 50
Part. 561
114,3
120
Part. 126Part. 561 Part. 126Part. 561
82,5 1
50 83,5 50
Part. 561 Part. 560
Part. 561
Df ø 70
ø 60
4339,53,5
Df ø 60
41
Part. 565page 36
82,5
100
Part. 614
114,3
Part. 126Part.614
82,5 5,5
50 88 50
Part. 614
82,5 2,5
50 85 50
82,5 1
50 83,5 50
Part. 614 Part. 613
Part. 555Part.614 Part.613
Part. 561
Part. 560
- Use : see Fig. 49-50-51-52-53.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 53.- Material : polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore diaDfmm
15,515561
Shaft diamm
Part. Code
Bore diaDfmm
15,515560
Shaft diamm
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Roller
Dia. 50 mm
Roller
Dia. 50 mmFig. 51 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 52 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 50 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 49 - Chain width 82,5 mm (K 325)
Fig. 53 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Roller (with rubber surface)
Dia. 60 mm
Part. 613
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
613
615342615352615362615372
- Use : see Fig. 57-58.- Characteristics:completely closed design.Less noise even in high speed conveyors. Hub in acetal for low friction. - Material : roller in acetal POM (black). External SBR rubber surface (grey). 60 Shore hardness.- Packaging : 100 pieces.
Part. 614
PATENT PENDING
PATENT PENDING
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
614
615382615392615402615412
- Use : see Fig. 54-55-56-57-58-59.- Characteristics:completely closed design.Less noise even in high speed conveyors. Hub in acetal for low friction. - Material : roller in acetal POM (black). External SBR rubber surface (grey). 60 Shore hardness.- Packaging : 100 pieces.
Dia. 60 mm
Roller (with rubber surface)
Fig. 56 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 55 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 54 - Chain width 82,5 mm (K 325)
Fig. 57 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 58 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 59 - Chain width 114,3 mm (K 450) / Pitch 120 mm See fig. 65 page 31
697561*
697551*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
28 29
Conveyor Components Conveyor Components
41243
ø 50
Df ø 60
ø 50
Df
40
Part. 565page 36
82,5
100
114,3
Part. 126Part. 561
82,5 5,5
50 88 50
Part. 561
114,3
120
Part. 126Part. 561 Part. 126Part. 561
82,5 1
50 83,5 50
Part. 561 Part. 560
Part. 561
Df ø 70
ø 60
4339,53,5
Df ø 60
41
Part. 565page 36
82,5
100
Part. 614
114,3
Part. 126Part.614
82,5 5,5
50 88 50
Part. 614
82,5 2,5
50 85 50
82,5 1
50 83,5 50
Part. 614 Part. 613
Part. 555Part.614 Part.613
Part. 561
Part. 560
- Use : see Fig. 49-50-51-52-53.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 53.- Material : polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore diaDfmm
15,515561
Shaft diamm
Part. Code
Bore diaDfmm
15,515560
Shaft diamm
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Roller
Dia. 50 mm
Roller
Dia. 50 mmFig. 51 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 52 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Fig. 50 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 49 - Chain width 82,5 mm (K 325)
Fig. 53 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Roller (with rubber surface)
Dia. 60 mm
Part. 613
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
613
615342615352615362615372
- Use : see Fig. 57-58.- Characteristics:completely closed design.Less noise even in high speed conveyors. Hub in acetal for low friction. - Material : roller in acetal POM (black). External SBR rubber surface (grey). 60 Shore hardness.- Packaging : 100 pieces.
Part. 614
PATENT PENDING
PATENT PENDING
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
614
615382615392615402615412
- Use : see Fig. 54-55-56-57-58-59.- Characteristics:completely closed design.Less noise even in high speed conveyors. Hub in acetal for low friction. - Material : roller in acetal POM (black). External SBR rubber surface (grey). 60 Shore hardness.- Packaging : 100 pieces.
Dia. 60 mm
Roller (with rubber surface)
Fig. 56 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 55 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 54 - Chain width 82,5 mm (K 325)
Fig. 57 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 58 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 59 - Chain width 114,3 mm (K 450) / Pitch 120 mm See fig. 65 page 31
697561*
697551*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
30 31
Conveyor Components Conveyor Components
ø 70
,5
Df
2
85,5
ø 60
,5Df
Df ø 70
,5
2
ø 60
Df
40,5
Part. 565page 36
82,5
100
Part. 556
Part.11Part.37
Part.37
114,3
Part. 126Part.556
82,5 5,5
50 88 50
Part. 556
Part.11Part.37 Part.37
82,5 2,5
50 85 50
82,5 1
50 83,5 50
Part.556 Part.554
Part. 555Part.556 Part.554
114,3
120
Part.556-614 Part. 126
82,5
110
Part. 556-614Part. 624
7
Df ø 59
,5
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Roller
Part. 555 Guide flange
For Part. 554-613
Part. Code
Bore diaDfmm
15,216,218,220,2
555
- Use : see Fig. 63.- Assembly : to be applied to rollers Part. 554-613.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. 11
Part.
Bore diaDfmm
14,516,511
1416
- Use : see Fig. 60-62.- Material : polyamide PA (black).- Packaging : 50 pieces.
Code
Shaft diamm
Shaft diamm
15161820
Part. 554
- Use : see Fig. 63-64.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
554
Dia. 60 mm
Dia. 60 mm
Roller
Fig. 62 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 61 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 60 - Chain width 82,5 mm (K 325)
Fig. 63 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 64 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
41243
ø 60
Df ø 70
- Use : see Fig. 60-61-62-63-64-65.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
556
Part. 556
Dia. 60 mm
Roller
Fig. 65 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Guide flange Part. 37
Part.
Bore diaDfmm
14,516,5
141637
- Use : see Fig. 60-62.- Material : polyamide PA (black).- Assembly : by pressure on the centre hole.- Packaging : 100 pieces.
CodeShaft dia
mm
Fig. 66 - Chain width 82,5 mm (K 325)
Separator Part. 624
Code
Bore diaDfmm
20,2 619412
- Use : see Fig. 66.- Assembly : to be applied to rollers Part. 556-614.- Material : polyethylene PE (white ).- Packaging : 100 pieces.
Shaft diamm
20
Part.
624
695221*695231695241*695251
695141*695151695161*695171
695181*695191695201*695211
50700611022*
50690611012*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
30 31
Conveyor Components Conveyor Components
ø 70
,5
Df
2
85,5
ø 60
,5Df
Df ø 70
,5
2
ø 60
Df
40,5
Part. 565page 36
82,5
100
Part. 556
Part.11Part.37
Part.37
114,3
Part. 126Part.556
82,5 5,5
50 88 50
Part. 556
Part.11Part.37 Part.37
82,5 2,5
50 85 50
82,5 1
50 83,5 50
Part.556 Part.554
Part. 555Part.556 Part.554
114,3
120
Part.556-614 Part. 126
82,5
110
Part. 556-614Part. 624
7
Df ø 59
,5
ROLLER GUIDES FOR CHAIN RETURN ROLLER GUIDES FOR CHAIN RETURN
Roller
Part. 555 Guide flange
For Part. 554-613
Part. Code
Bore diaDfmm
15,216,218,220,2
555
- Use : see Fig. 63.- Assembly : to be applied to rollers Part. 554-613.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. 11
Part.
Bore diaDfmm
14,516,511
1416
- Use : see Fig. 60-62.- Material : polyamide PA (black).- Packaging : 50 pieces.
Code
Shaft diamm
Shaft diamm
15161820
Part. 554
- Use : see Fig. 63-64.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
554
Dia. 60 mm
Dia. 60 mm
Roller
Fig. 62 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 61 - Chain width 114,3 mm (K 450)
• TableTop® chains / PlateTop chains
Fig. 60 - Chain width 82,5 mm (K 325)
Fig. 63 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 64 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
41243
ø 60
Df ø 70
- Use : see Fig. 60-61-62-63-64-65.- Material : self-lubricating polyamide PA (black).- Packaging : 100 pieces.
Part. Code
Bore dia.Dfmm
15,516,518,520,5
Shaft dia.mm
15161820
556
Part. 556
Dia. 60 mm
Roller
Fig. 65 - Chain width 114,3 mm (K 450) / Pitch 120 mm
Guide flange Part. 37
Part.
Bore diaDfmm
14,516,5
141637
- Use : see Fig. 60-62.- Material : polyamide PA (black).- Assembly : by pressure on the centre hole.- Packaging : 100 pieces.
CodeShaft dia
mm
Fig. 66 - Chain width 82,5 mm (K 325)
Separator Part. 624
Code
Bore diaDfmm
20,2 619412
- Use : see Fig. 66.- Assembly : to be applied to rollers Part. 556-614.- Material : polyethylene PE (white ).- Packaging : 100 pieces.
Shaft diamm
20
Part.
624
695221*695231695241*695251
695141*695151695161*695171
695181*695191695201*695211
50700611022*
50690611012*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
3332
Conveyor Components Conveyor Components
27 44,5
10R 70,5Part.523
10325,5
84
6,553
6,5
27,7
2340
R 75 Part.523
10325,5 6,5
536,5
84
27,7
500 400
75÷125
150
min
L
DmDf Di De
0,4
0,2
L 1
L 2
Ø 5
3Df Ø
191
Ø 2
00
45183,5
0,4
0,2
43,7540,75
59,5
82,585
Part. 22
Part. 74
Part.67Part.22
Part.67Part.22
Part. 22 M
82,5
88
82,5
100
101,6
82,583,550 501
82,5
85 50
2,5
50
82,5
8850
5,5
50
Part. 282
Part. 282
Part.533672801
Part. 524
Part. 523
Part.533672801
Part. 523 Part. 524
Part. 282Part.533672801
Part. 523 Part. 524Part. 282Part.533
672801 Part.533672811
Part. 523 Part. 524
82,5
100
50 50
5050
5,5
2,5
30
5
Part. 282
Part. 282
Snap-on assembly
Polyamide PA (black)
Polyethylene UHMWPE (black) 1.000.000 0,11
Part. Code
282
MaterialWeight
Kg
- Use : see Fig. 71-72-73-74.- Applicable to spacers Part. 523. - Assembly : press-fit. Interference fixed. - Packaging : 10 pieces.
0,06
Part. Code
282
MaterialWeight
Kg
- Use : see Fig. 71-72-73-74.- Applicable to spacers Part. 523. - Snap-on assembly.- Economical version.- Confezione : 50 pezzi.
60615
Part. 67-22-74
Part. 22M
Part.
67
Demm
167
Dmmm
L1mm
50
L2mm
84,5
Lmm
87,53040
41*
Dimm
Bore dia.Df
mm
1565058050590
22 200 45 85,5 87,5304053191
74 200 62 102,5 105,5304053191
- Use : Part. 67 see Fig. 66-67. Part. 22 see Fig. 67- 68-69. Part. 74 see Fig. 70.- Material : roller in polyamide PA (black), screws in zinc plated steel.- Weight : Part. 67 (0,39 Kg), Part. 22 (0,50 Kg), Part. 74 (0,59 Kg).- Packaging : Part. 67 (30 pieces ), Part. 22 (20 pieces ), Part. 74 (15 pieces ).
Part. 67 (Df 30) - 22 - 74 Part. 67 (Df 40)
Code
Part.
Bore dia.Df
mm
22 M 30
WeightKg
0,4964507
Code
- Use : see Fig. 69.- Material : roller in polyamide PA (black), screws in zinc plated steel.- Packaging : 20 pieces.
Fig. 68 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 69 - Chain width 82,5 mm (K 325) / Pitch 85 mm
- The schedule of Fig. 69 is meant for 2 track conveyors.- With 3 track conveyors : use 1 Part. 22 and 2 Part. 22 M.- With 4 track conveyors : use 1 Part. 22 and 3 Part. 22 M, etc.
Fig. 70 - Chain width 101,6 mm (K 400)
• TableTop® chains
Fig. 67 - Chain width 82,5 mm (K 325)
Fig. 72 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 73 - Chain width 82,5 mm (K 325) / Pitch 85 mm Fig. 74 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
• TableTop® chains / PlateTop chains
• Positioning
Fig. 71 - Chain width 82,5 mm (K 325)
ROLLER GUIDES FOR CHAIN RETURN SERPENTINE GUIDES FOR CHAIN RETURN
Rollers
Rollers
Chain return guide
Chain return guide
* = The Part. 67 with Df 40 issupplied without hub
6384050630*5064050650*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
66991*
3332
Conveyor Components Conveyor Components
27 44,5
10R 70,5Part.523
10325,5
84
6,553
6,5
27,7
2340
R 75 Part.523
10325,5 6,5
536,5
84
27,7
500 400
75÷125
150
min
L
DmDf Di De
0,4
0,2
L 1
L 2
Ø 5
3Df Ø
191
Ø 2
00
45183,5
0,4
0,2
43,7540,75
59,5
82,585
Part. 22
Part. 74
Part.67Part.22
Part.67Part.22
Part. 22 M
82,5
88
82,5
100
101,6
82,583,550 501
82,5
85 50
2,5
50
82,5
8850
5,5
50
Part. 282
Part. 282
Part.533672801
Part. 524
Part. 523
Part.533672801
Part. 523 Part. 524
Part. 282Part.533672801
Part. 523 Part. 524Part. 282Part.533
672801 Part.533672811
Part. 523 Part. 524
82,5
100
50 50
5050
5,5
2,5
30
5
Part. 282
Part. 282
Snap-on assembly
Polyamide PA (black)
Polyethylene UHMWPE (black) 1.000.000 0,11
Part. Code
282
MaterialWeight
Kg
- Use : see Fig. 71-72-73-74.- Applicable to spacers Part. 523. - Assembly : press-fit. Interference fixed. - Packaging : 10 pieces.
0,06
Part. Code
282
MaterialWeight
Kg
- Use : see Fig. 71-72-73-74.- Applicable to spacers Part. 523. - Snap-on assembly.- Economical version.- Confezione : 50 pezzi.
60615
Part. 67-22-74
Part. 22M
Part.
67
Demm
167
Dmmm
L1mm
50
L2mm
84,5
Lmm
87,53040
41*
Dimm
Bore dia.Df
mm
1565058050590
22 200 45 85,5 87,5304053191
74 200 62 102,5 105,5304053191
- Use : Part. 67 see Fig. 66-67. Part. 22 see Fig. 67- 68-69. Part. 74 see Fig. 70.- Material : roller in polyamide PA (black), screws in zinc plated steel.- Weight : Part. 67 (0,39 Kg), Part. 22 (0,50 Kg), Part. 74 (0,59 Kg).- Packaging : Part. 67 (30 pieces ), Part. 22 (20 pieces ), Part. 74 (15 pieces ).
Part. 67 (Df 30) - 22 - 74 Part. 67 (Df 40)
Code
Part.
Bore dia.Df
mm
22 M 30
WeightKg
0,4964507
Code
- Use : see Fig. 69.- Material : roller in polyamide PA (black), screws in zinc plated steel.- Packaging : 20 pieces.
Fig. 68 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 69 - Chain width 82,5 mm (K 325) / Pitch 85 mm
- The schedule of Fig. 69 is meant for 2 track conveyors.- With 3 track conveyors : use 1 Part. 22 and 2 Part. 22 M.- With 4 track conveyors : use 1 Part. 22 and 3 Part. 22 M, etc.
Fig. 70 - Chain width 101,6 mm (K 400)
• TableTop® chains
Fig. 67 - Chain width 82,5 mm (K 325)
Fig. 72 - Chain width 82,5 mm (K 325) / Pitch 88 mm
Fig. 73 - Chain width 82,5 mm (K 325) / Pitch 85 mm Fig. 74 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
• TableTop® chains / PlateTop chains
• Positioning
Fig. 71 - Chain width 82,5 mm (K 325)
ROLLER GUIDES FOR CHAIN RETURN SERPENTINE GUIDES FOR CHAIN RETURN
Rollers
Rollers
Chain return guide
Chain return guide
* = The Part. 67 with Df 40 issupplied without hub
6384050630*5064050650*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
66991*
34 35
Conveyor Components Conveyor Components
60
1610
75
20,526
15
25
84841
6,2
20,55
20,5
16
13
75
264 84
55
10
84
15
5
7,5 27 15 27 7,5
30,5
26
20,5
1338
20,5Part.524
8415
5
7,5 27 15 27 7,5
A
26
B38
DfPart.524
Part.523
Part. 565page 36
Part. 566page 37
Part.533672801
Part.533672801
Part. 523
Part.533672801
Part.533672801
Part.533672811
Part. 523
Part.533672801
Part.533672801
Part.533672801
Part. 523
Part. 524
Part. 524
Part. 524
82,5
8850
5,5
50
82,5
85 50
2,5
50
82,583,550 501
Part.533672801
Part. 524
Part. 523
82,5
100
500 400
75÷125
150
min
Part.524
Part.282
Part. 523
Part. 523
Part. 533
Part. 524
0,01
- Use : see Fig. 75-76-77-78.- Applicable to spacers Part. 523. Snap-on assembly.- Standard packaging : coil.- Packaging : 70 metres.
Part. Material Code
Polyethylene PE (green) 1.000.000524 643501
Part. 533
Part.Weight
KgCode
533 672801
Part. 523
Part. 523
15,216,218,220,4
2828,529,930,5
15,5151413
Part. Code
523 643451
Part. Code
523
- Use : see Fig. 75-76-77-78.- Material : polyamide PA (black).- Packaging : 100 pieces.
Amm
0,04
WeightKg
Bmm
Bore diaDf
mm
15161820
Shaft diamm
20x20
Squareshaftmm
0,03
WeightKg
Square 20x20
• Snap-on assembly on round steel profiles
• Snap-on assembly on square
Round profiles
dia. 15-16-18-20
- Use : see Fig. 75-76-77-78.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 75-76-77-78.- Applicable to spacers Part. 523. Snap-on assembly.- Material : polyamide PA (black).- Packaging : 100 pieces.
Snap-on assembly for round profiles
Snap-on assembly for square profiles
SERPENTINE GUIDES FOR CHAIN RETURN SERPENTINE GUIDES FOR CHAIN RETURN
Spacer
Spacer Striker
Striker (centre)
Sliding profile
Fig. 77 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 78 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 76 - Chain width 82,5 mm (K 325) / Pitch 88 mm
• TableTop® chains / PlateTop chains
Fig. 75 - Chain width 82,5 mm (K 325)
• Positioning
- Use : see Fig. 77.- Applicable to spacers Part. 523. Snap-on assembly.- Material : polyamide PA (black).- Packaging : 100 pieces.
0,01
Part.Weight
KgCode
533
643461*643471*643481*643491
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
672811*
34 35
Conveyor Components Conveyor Components
60
1610
75
20,526
15
25
84841
6,2
20,55
20,5
16
13
75
264 84
55
10
84
15
5
7,5 27 15 27 7,5
30,5
26
20,5
1338
20,5Part.524
84
15
5
7,5 27 15 27 7,5
A
26
B38
DfPart.524
Part.523
Part. 565page 36
Part. 566page 37
Part.533672801
Part.533672801
Part. 523
Part.533672801
Part.533672801
Part.533672811
Part. 523
Part.533672801
Part.533672801
Part.533672801
Part. 523
Part. 524
Part. 524
Part. 524
82,5
8850
5,5
50
82,5
85 50
2,5
50
82,583,550 501
Part.533672801
Part. 524
Part. 523
82,5
100
500 400
75÷125
150
min
Part.524
Part.282
Part. 523
Part. 523
Part. 533
Part. 524
0,01
- Use : see Fig. 75-76-77-78.- Applicable to spacers Part. 523. Snap-on assembly.- Standard packaging : coil.- Packaging : 70 metres.
Part. Material Code
Polyethylene PE (green) 1.000.000524 643501
Part. 533
Part.Weight
KgCode
533 672801
Part. 523
Part. 523
15,216,218,220,4
2828,529,930,5
15,5151413
Part. Code
523 643451
Part. Code
523
- Use : see Fig. 75-76-77-78.- Material : polyamide PA (black).- Packaging : 100 pieces.
Amm
0,04
WeightKg
Bmm
Bore diaDf
mm
15161820
Shaft diamm
20x20
Squareshaftmm
0,03
WeightKg
Square 20x20
• Snap-on assembly on round steel profiles
• Snap-on assembly on square
Round profiles
dia. 15-16-18-20
- Use : see Fig. 75-76-77-78.- Material : polyamide PA (black).- Packaging : 100 pieces.
- Use : see Fig. 75-76-77-78.- Applicable to spacers Part. 523. Snap-on assembly.- Material : polyamide PA (black).- Packaging : 100 pieces.
Snap-on assembly for round profiles
Snap-on assembly for square profiles
SERPENTINE GUIDES FOR CHAIN RETURN SERPENTINE GUIDES FOR CHAIN RETURN
Spacer
Spacer Striker
Striker (centre)
Sliding profile
Fig. 77 - Chain width 82,5 mm (K 325) / Pitch 85 mm
Fig. 78 - Chain width 82,5 mm (K 325) / Pitch 83,5 mm
Fig. 76 - Chain width 82,5 mm (K 325) / Pitch 88 mm
• TableTop® chains / PlateTop chains
Fig. 75 - Chain width 82,5 mm (K 325)
• Positioning
- Use : see Fig. 77.- Applicable to spacers Part. 523. Snap-on assembly.- Material : polyamide PA (black).- Packaging : 100 pieces.
0,01
Part.Weight
KgCode
533
643461*643471*643481*643491
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
672811*
36 37
Conveyor Components Conveyor Components
De
3 1711,5
D Di
6 2541
Expansion cone
DiD
6 2541
DiDDeDe
6 2541
DiD
6 2541
DiDDeDe
Part. 523
Part. 559Part. 179
Part. 565
Part. 565
Tube dia.18-20
Tube dia. 18-20
Part. 565-179
Tightening the bolt the plug expands and stays firmly inthe tube
De
3 1711,5
D Di
Part. 566-592
Tightening the bolt the plug expands and stays firmly inthe tube.
Tube dia.38
Part.366-367-368
Expansion cone Expansion cone Expansion conePart. 523
Part. 566
Tube 20x20
Expansion cone Expansion cone
MatTop® chain
Part. 592 Tube
Part. 592
Part. 366-367- 368-422
40x40
Tube 40x40
Tube 40x40
Code
Part. 566
Part. 592
Part. 565
Part. 179
Part.
565
Outsidedia.mm
18
20
Insidedia.mm
1514
ThreadD
Tube dimensions
M8M6M8M10
Demm
18182020
Dimm
15141717
Thicknessmm
1,52
171,5
698661698671698681698691
- Material : plug in polyamide PA (black), expansion cone in brass.- Weight : 0,01Kg.- Packaging : 100 pieces.- Max recommended tightening torque : 1 Kgm.
CodePart.
179
• Expansion cone in brass
Expansion cone in brass
35 M8M10M8M10
404044,544,5
34,834,839,239,2
1,5
39,41,5
69513695236953369543
38
42,4
179
• Expansion cone in reinforced polyamide PA FV
Expansion cone in reinforcedpolyamide PA FV
M8M10M8M10
404044,544,5
34,834,839,239,2
- Material : plug in reinforced polyamide PA (black), expansion cone in brass or in reiforced polyamide PA FV.- Weight : 0,10 Kg.- Packaging : 50 pieces.- Max recommended tightening torque : 2,5 Kgm ( for M8), 4 Kgm (for M10).
351,5
39,41,5
38
42,4
CodePart.Thread
DDemm
Dimm
CodePart.
592
• Expansion cone in brass
37/36
ThreadD
M8M10M8M10
Demm
42424242
Dimm
36363434
1,5/2
35/342,5/3
609442609462609482609502
566 20x2017
ThreadD
M8M10M8
Demm
202020
Dimm
171716
1,5
162
698701698711698721
40x40
40x40592
• Expansion cone in reinforced polyamide PA FV
37/36 M8M10M8M10
42424242
36363434
1,5/2
35/342,5/3
609452609472609492609512
- Material : plug in reinforced polyamide PA FV (black), expansion cone in brass or in reiforced polyamide PA FV.- Weight : 0,10 Kg.- Packaging : 50 pieces.- Max recommended tightening torque : 2,5 Kgm ( for M8), 4 Kgm (for M10).
Outsidedia.mm
Insidedia.mm
Tube dimensions
Thicknessmm
Outsidemm
Insidemm
Tube dimensionsThickness
mm
Expansion cone in brass
Expansion cone in reinforcedpolyamide PA FV
Outsidemm
Insidemm
Tube dimensionsThickness
mm
EXPANSION PLUGS FOR SIDES CONNECTION
for round tubes dia. 18-20 mm
for round tubes dia. 38-42,4 mm
EXPANSION PLUGS FOR SIDES CONNECTION
Expansion plugs
Expansion plugs
Expansion plugs
Expansion plugs
• Assembly Part. 565 - 179 • Assembly Part. 566 - 592
• Application example of Part.565 for return chain rollers
• Application example of Part.565 for serpentine return
• Application example of Part.179 for supporting chain guide profile Part. 366-367- 368
• Deflection of Part. 179
Load P (Newton)
P
175
Cone in PA FV
Cone in brass
200 2251505
7
9
11
13
Defle
ctio
n (m
m)
200
• Application example of Part.566 for serpentine return
• Application example of Part.592 for modular chain conveyors to support profiles Part. 366-367- 368-422
- Material : plug in polyamide PA (black), expansion cone in brass.- Weight : 0,01Kg.- Packaging : 100 pieces.- Max recommended tightening torque : 1 Kgm.
for square tubes 40 mm
for square tubes 20 mm
5488152641*5489152651*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
36 37
Conveyor Components Conveyor Components
De
3 1711,5
D Di
6 2541
Expansion cone
DiD
6 2541
DiDDeDe
6 2541
DiD
6 2541
DiDDeDe
Part. 523
Part. 559Part. 179
Part. 565
Part. 565
Tube dia.18-20
Tube dia. 18-20
Part. 565-179
Tightening the bolt the plug expands and stays firmly inthe tube
De
3 1711,5
D Di
Part. 566-592
Tightening the bolt the plug expands and stays firmly inthe tube.
Tube dia.38
Part.366-367-368
Expansion cone Expansion cone Expansion conePart. 523
Part. 566
Tube 20x20
Expansion cone Expansion cone
MatTop® chain
Part. 592 Tube
Part. 592
Part. 366-367- 368-422
40x40
Tube 40x40
Tube 40x40
Code
Part. 566
Part. 592
Part. 565
Part. 179
Part.
565
Outsidedia.mm
18
20
Insidedia.mm
1514
ThreadD
Tube dimensions
M8M6M8M10
Demm
18182020
Dimm
15141717
Thicknessmm
1,52
171,5
698661698671698681698691
- Material : plug in polyamide PA (black), expansion cone in brass.- Weight : 0,01Kg.- Packaging : 100 pieces.- Max recommended tightening torque : 1 Kgm.
CodePart.
179
• Expansion cone in brass
Expansion cone in brass
35 M8M10M8M10
404044,544,5
34,834,839,239,2
1,5
39,41,5
69513695236953369543
38
42,4
179
• Expansion cone in reinforced polyamide PA FV
Expansion cone in reinforcedpolyamide PA FV
M8M10M8M10
404044,544,5
34,834,839,239,2
- Material : plug in reinforced polyamide PA (black), expansion cone in brass or in reiforced polyamide PA FV.- Weight : 0,10 Kg.- Packaging : 50 pieces.- Max recommended tightening torque : 2,5 Kgm ( for M8), 4 Kgm (for M10).
351,5
39,41,5
38
42,4
CodePart.Thread
DDemm
Dimm
CodePart.
592
• Expansion cone in brass
37/36
ThreadD
M8M10M8M10
Demm
42424242
Dimm
36363434
1,5/2
35/342,5/3
609442609462609482609502
566 20x2017
ThreadD
M8M10M8
Demm
202020
Dimm
171716
1,5
162
698701698711698721
40x40
40x40592
• Expansion cone in reinforced polyamide PA FV
37/36 M8M10M8M10
42424242
36363434
1,5/2
35/342,5/3
609452609472609492609512
- Material : plug in reinforced polyamide PA FV (black), expansion cone in brass or in reiforced polyamide PA FV.- Weight : 0,10 Kg.- Packaging : 50 pieces.- Max recommended tightening torque : 2,5 Kgm ( for M8), 4 Kgm (for M10).
Outsidedia.mm
Insidedia.mm
Tube dimensions
Thicknessmm
Outsidemm
Insidemm
Tube dimensionsThickness
mm
Expansion cone in brass
Expansion cone in reinforcedpolyamide PA FV
Outsidemm
Insidemm
Tube dimensionsThickness
mm
EXPANSION PLUGS FOR SIDES CONNECTION
for round tubes dia. 18-20 mm
for round tubes dia. 38-42,4 mm
EXPANSION PLUGS FOR SIDES CONNECTION
Expansion plugs
Expansion plugs
Expansion plugs
Expansion plugs
• Assembly Part. 565 - 179 • Assembly Part. 566 - 592
• Application example of Part.565 for return chain rollers
• Application example of Part.565 for serpentine return
• Application example of Part.179 for supporting chain guide profile Part. 366-367- 368
• Deflection of Part. 179
Load P (Newton)
P
175
Cone in PA FV
Cone in brass
200 2251505
7
9
11
13
Defle
ctio
n (m
m)
200
• Application example of Part.566 for serpentine return
• Application example of Part.592 for modular chain conveyors to support profiles Part. 366-367- 368-422
- Material : plug in polyamide PA (black), expansion cone in brass.- Weight : 0,01Kg.- Packaging : 100 pieces.- Max recommended tightening torque : 1 Kgm.
for square tubes 40 mm
for square tubes 20 mm
5488152641*5489152651*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
38 39
Conveyor Components Conveyor Components
SIDE MOUNTING TOP BRACKETS
BEARING HEADS
SUPPORT BASES
CONNECTING JOINTS
Part. 419 - Page 47 Support bases for tubesdia. 33,7.
Part. 146 - Page 49 Reduction bush for Part. 119 B. For tubes dia. 48,3.
Part. 420 - Page 45-47 Reduction bush for Part. 418 - 419. For tubes dia. 26,9.
Part. 416 - Page 40 Side mounting top bracketfor tubes dia. 33,7.
Part. 415 - Page 42 Bearing heads for tubes dia. 33,7.
Part. 615 - Page 44 Support bases for tubes dia. 38,1-42,4-48,3-50,8-60,3.
Part. 619 - Page 48 Support bases for tubesdia. 42,4-48,3-50,8-60,3.
Part. 562 - Page 50 Connecting joint for tubesdia. 33,7-38,1-42,4-48,3.
Part. 409 - Page 54 Connecting joint for tubesdia. 38-42,4-48,3-60,3.
Part. 199 - Page 40 Side mounting top bracket fortubes dia. 48,3 and 38-40.
Part. 418 - Page 45 Support bases for tubes dia. 33,7.
Part. 616 - Page 48 Support bases for tubesdia. 42,4-48,3-50,8-60,3.
Part. 563 - Page 50 Connecting joint for tubes dia. 50,8-60,3.
Part. 168 - Page 41 Side mounting top bracket for tubes dia. 48,3 and 40.
Part. 280 - Page 43 Bearing heads for tubes dia. 48,3-60,3.
Part. 618 - Page 46 Support bases for tubes dia. 38,1-42,4-48,3-50,8-60,3.
Part. 119 B - Page 49 Support bases for tubesdia. 42,4-48,3-60,3
Part. 141 - Page 43 Bearing heads for tubes dia. 60,3.
Part. 611 - Page 46 Support bases for squaretubes 40-50-60.
Part. 124 - Page 49 Reduction bush for Part. 119 B For tubes dia. 42,4-48,3-50-50,6.
FRAME SUPPORT COMPONENTS FRAME SUPPORT COMPONENTS
40
Part. 199 Part. 168
Part. 564
Part. 611-Split Part. 611-SplitPart. 611-Split
Part. 198
50
Part. 564
60
Part. 199
Part. 170*
Part. 562-137
ø 48,3 ø 48,3 ø 48,3ø 48,3
Part. 198-280
For square tubes 50x50 For square tubes 60x60
Part. 409
Part. 119 B
Part. 119 B
Part. 198 - Page 42 Bearing heads for tubes dia. 48,3 and 38-40.
For round tubes dia. 33,7 (1") For round tubes dia. 38,1
Part. 562-417
Part. 415
Part. 416
Part. 418-419
ø 33,7 ø 38,1 ø 42,4 ø 42,4 ø 42,4
Part. 562Part. 409 Part. 409
Part. 615-618
Part. 615-618
Part. 615-618
Part. 615-618 Part. 619-616
Part. 619- 616
Part. 619-616 Part. 615-618 Part. 619-616
For round tubes dia. 42,4 (1"1/4)
Part. 562- 454
Part. 119 B
For round tubes dia. 48,3 (1"1/2)
ø 50,8
Part. 563
ø 50,8
Part. 141
Part. 563-137
Part. 280 Part. 141Part. 280 Part. 280
Part. 280
For round tubes dia. 60,3 (2")
Part. 141
Part. 409
For round tubes dia. 50,8
Part. 199Part. 168 Part. 198-280
Part. 199Part. 168 Part. 198-280 Part. 198-280
Part. 199
ø 48,3
Part. 198280
Part. 199Part. 168
ø 60,3 ø 60,3 ø 60,3
40x80x2
40x80x2
Electrical wire pipe
Part. 409
*= See catalogue ROBO
40x80x2
For square tubes 40x40
In due metà
Part. 564 - Page 51 Connecting joint for square tubes 38-40-45-50
Part. 417 - Page 52Connecting joint for tubes dia. 33,7.
Part. 137 - Page 53 Connecting joint for tubes dia. 48,3 -60,3,
Part. 454 - Page 52 Connecting joint for tubesdia. 42,4.
38 39
Conveyor Components Conveyor Components
SIDE MOUNTING TOP BRACKETS
BEARING HEADS
SUPPORT BASES
CONNECTING JOINTS
Part. 419 - Page 47 Support bases for tubesdia. 33,7.
Part. 146 - Page 49 Reduction bush for Part. 119 B. For tubes dia. 48,3.
Part. 420 - Page 45-47 Reduction bush for Part. 418 - 419. For tubes dia. 26,9.
Part. 416 - Page 40 Side mounting top bracketfor tubes dia. 33,7.
Part. 415 - Page 42 Bearing heads for tubes dia. 33,7.
Part. 615 - Page 44 Support bases for tubes dia. 38,1-42,4-48,3-50,8-60,3.
Part. 619 - Page 48 Support bases for tubesdia. 42,4-48,3-50,8-60,3.
Part. 562 - Page 50 Connecting joint for tubesdia. 33,7-38,1-42,4-48,3.
Part. 409 - Page 54 Connecting joint for tubesdia. 38-42,4-48,3-60,3.
Part. 199 - Page 40 Side mounting top bracket fortubes dia. 48,3 and 38-40.
Part. 418 - Page 45 Support bases for tubes dia. 33,7.
Part. 616 - Page 48 Support bases for tubesdia. 42,4-48,3-50,8-60,3.
Part. 563 - Page 50 Connecting joint for tubes dia. 50,8-60,3.
Part. 168 - Page 41 Side mounting top bracket for tubes dia. 48,3 and 40.
Part. 280 - Page 43 Bearing heads for tubes dia. 48,3-60,3.
Part. 618 - Page 46 Support bases for tubes dia. 38,1-42,4-48,3-50,8-60,3.
Part. 119 B - Page 49 Support bases for tubesdia. 42,4-48,3-60,3
Part. 141 - Page 43 Bearing heads for tubes dia. 60,3.
Part. 611 - Page 46 Support bases for squaretubes 40-50-60.
Part. 124 - Page 49 Reduction bush for Part. 119 B For tubes dia. 42,4-48,3-50-50,6.
FRAME SUPPORT COMPONENTS FRAME SUPPORT COMPONENTS
40
Part. 199 Part. 168
Part. 564
Part. 611-Split Part. 611-SplitPart. 611-Split
Part. 198
50
Part. 564
60
Part. 199
Part. 170*
Part. 562-137
ø 48,3 ø 48,3 ø 48,3ø 48,3
Part. 198-280
For square tubes 50x50 For square tubes 60x60
Part. 409
Part. 119 B
Part. 119 B
Part. 198 - Page 42 Bearing heads for tubes dia. 48,3 and 38-40.
For round tubes dia. 33,7 (1") For round tubes dia. 38,1
Part. 562-417
Part. 415
Part. 416
Part. 418-419
ø 33,7 ø 38,1 ø 42,4 ø 42,4 ø 42,4
Part. 562Part. 409 Part. 409
Part. 615- 618
Part. 615-618
Part. 615-618
Part. 615-618 Part. 619-616
Part. 619- 616
Part. 619-616 Part. 615- 618 Part. 619-616
For round tubes dia. 42,4 (1"1/4)
Part. 562- 454
Part. 119 B
For round tubes dia. 48,3 (1"1/2)
ø 50,8
Part. 563
ø 50,8
Part. 141
Part. 563-137
Part. 280 Part. 141Part. 280 Part. 280
Part. 280
For round tubes dia. 60,3 (2")
Part. 141
Part. 409
For round tubes dia. 50,8
Part. 199Part. 168 Part. 198-280
Part. 199Part. 168 Part. 198-280 Part. 198-280
Part. 199
ø 48,3
Part. 198280
Part. 199Part. 168
ø 60,3 ø 60,3 ø 60,3
40x80x2
40x80x2
Electrical wire pipe
Part. 409
*= See catalogue ROBO
40x80x2
For square tubes 40x40
In due metà
Part. 564 - Page 51 Connecting joint for square tubes 38-40-45-50
Part. 417 - Page 52Connecting joint for tubes dia. 33,7.
Part. 137 - Page 53 Connecting joint for tubes dia. 48,3 -60,3,
Part. 454 - Page 52 Connecting joint for tubesdia. 42,4.
40 41
Conveyor Components Conveyor Components
Part. 415
Part. 615
Part. 137-562
Part. 168
Part. 280
Part. 179
Part. 137
Part. 170*
Part. 180*
Part. 618
Part. 409
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
* = see catalogue ROBO®
94
172
20
61
60,5
M810°
69
3030
23
9,5
8,5
N. 3
Df+ 0,2
0
B
A
66
39Df
+0,20
129
15 50
ø 8,
5 N
°3
22,5
1022
,5
52 20°
7
M8
10
12
8,5
R 4,5 A
125 72
16,5
105
115
84Df+ 0,2
0
11646
82
3° 3°
6
10,5
A
B
22
24
Part.
416
Part. 199
CodePart.
Part. 168Part. 416
Part. 199
416
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1")
- Material : reinforced polyamide PA FV (black).- Weight : 0,15 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
199
dia. 48,3dia. 48,3 (1"1/2)
38
AISI 304
Boltsmaterial
AISI 304
AISI 304Zinc plated steel
40 AISI 304Zinc plated steel
59171611622611712611632611722
- Material : reinforced polyamide PA FV (black).- Weight : 0,32 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
CodePart.
BoreDf
mmBolts
material
Tests performed at tightening torque : 2 Kgm
Part. 416 (P = 3300 N)Part. 199- Ø 48,3 (P = 3600 N)Part. 199- 38 (P = 2600 N)Part. 199- 40 (P = 1900 N)
Part. 416 (P = 21900 N)Part. 199 (P = 35900 N)
Load P (Newton)
P
400200 600 800 10000
1
2
3
4
5
Defle
ctio
n (m
m)
100
P
P
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
P100
Tests performed at tightening torque : 2 Kgm
With tubes Ø48,3 (P = 1900 N)With tubes 40 (P = 3100 N)
P
P
P = 22300
Tubedimensions
mm
SIDE MOUNTING TOP BRACKETS
Side mounting top bracket
For round tubes
For round and square tubes
For round and square tubes
Side mounting top bracket
• Deflection of Part. 416 - 199
• Deflection of Part. 168
• Assembly of Part. 416
• Assembly of Part. 199 (with round tubes)
• Assembly of Part. 199 (with square tubes)
• Sliding load • Breaking load
Side mounting top bracket
SIDE MOUNTING TOP BRACKETS
To use holes A and B break out the diaphragms
38x38
40x40
168dia. 48,3dia. 48,3 (1"1/2)
4050451611672
- Material : reinforced polyamide PA FV (black).- Weight : 0,42 Kg.- Max recommended tightening torque : 2,5 Kgm.- Packaging : 8 pieces.
CodePart.
BoreDf
mm
Tubedimensions
mm
40x40
Part. 564
Tube 40
Part. 611
Part. 199
• Sliding load • Breaking load
• Assembly of Part. 168 (with square tubes)
Part. 564
Tubo 40
Part. 611
Part. 168
• Assembly of Part. 168 (with round tubes)
69668*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
40 41
Conveyor Components Conveyor Components
Part. 415
Part. 615
Part. 137-562
Part. 168
Part. 280
Part. 179
Part. 137
Part. 170*
Part. 180*
Part. 618
Part. 409
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
* = see catalogue ROBO®
94
172
20
61
60,5
M810°
69
3030
23
9,5
8,5
N. 3
Df+ 0,2
0
B
A
66
39Df
+0,20
129
15 50
ø 8,
5 N
°3
22,5
1022
,5
52 20°
7
M8
10
12
8,5
R 4,5 A
125 72
16,5
105
115
84Df+ 0,2
0
11646
82
3° 3°
6
10,5
A
B
22
24
Part.
416
Part. 199
CodePart.
Part. 168Part. 416
Part. 199
416
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1")
- Material : reinforced polyamide PA FV (black).- Weight : 0,15 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
199
dia. 48,3dia. 48,3 (1"1/2)
38
AISI 304
Boltsmaterial
AISI 304
AISI 304Zinc plated steel
40 AISI 304Zinc plated steel
59171611622611712611632611722
- Material : reinforced polyamide PA FV (black).- Weight : 0,32 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
CodePart.
BoreDf
mmBolts
material
Tests performed at tightening torque : 2 Kgm
Part. 416 (P = 3300 N)Part. 199- Ø 48,3 (P = 3600 N)Part. 199- 38 (P = 2600 N)Part. 199- 40 (P = 1900 N)
Part. 416 (P = 21900 N)Part. 199 (P = 35900 N)
Load P (Newton)
P
400200 600 800 10000
1
2
3
4
5
Defle
ctio
n (m
m)
100
P
P
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
P100
Tests performed at tightening torque : 2 Kgm
With tubes Ø 48,3 (P = 1900 N)With tubes 40 (P = 3100 N)
P
P
P = 22300
Tubedimensions
mm
SIDE MOUNTING TOP BRACKETS
Side mounting top bracket
For round tubes
For round and square tubes
For round and square tubes
Side mounting top bracket
• Deflection of Part. 416 - 199
• Deflection of Part. 168
• Assembly of Part. 416
• Assembly of Part. 199 (with round tubes)
• Assembly of Part. 199 (with square tubes)
• Sliding load • Breaking load
Side mounting top bracket
SIDE MOUNTING TOP BRACKETS
To use holes A and B break out the diaphragms
38x38
40x40
168dia. 48,3dia. 48,3 (1"1/2)
4050451611672
- Material : reinforced polyamide PA FV (black).- Weight : 0,42 Kg.- Max recommended tightening torque : 2,5 Kgm.- Packaging : 8 pieces.
CodePart.
BoreDf
mm
Tubedimensions
mm
40x40
Part. 564
Tube 40
Part. 611
Part. 199
• Sliding load • Breaking load
• Assembly of Part. 168 (with square tubes)
Part. 564
Tubo 40
Part. 611
Part. 168
• Assembly of Part. 168 (with round tubes)
69668*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
42 43
Conveyor Components Conveyor Components
Part. 415
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
Part. 615
Part. 198
Part. 198
Part. 199
Part. 616-619
Part. 280
Part. 199
Part. 141
18
Df+
0,2
0
6560
M8
45
5070
65
8,5
25 M8
70 Df+
0,2
0
7095
95
9
7480
*
*
990
93
3098
5565
92 116
Df+
0,2
0
140
6591,5
116
140
89,5
78
M8
M8 seat set screw for tube locking
Df+
0,2
0
Part.
415
Part.
141
Part. 280
Part. 198
Part. 280
Part. 141
Part. 415
Part. 198
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
CodePart.
280
Bore dia.Df
mm
48,360,3
6350366781
- Material : reinforced polyamide PA FV (black).- Weight : 0,40 Kg.- Max recommended tightening torque : 3,5 Kgm.- Packaging : 8 pieces.
Boltsmaterial
AISI 304AISI 304
100
P
P
To obtain the fixing centreholes with dimensions(92 x 55 mm) break out thethickness of diaphragm.
*
Tubedia.mm
BEARING HEADS BEARING HEADS
Bearing head
Bearing head Bearing head
Bearing head
CodePart.
415
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 69658
- Material : reinforced polyamide PA FV (black).- Weight : 0,12 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
Boltsmaterial
AISI 304
198
dia. 48,3dia. 48,3 (1"1/2)
38
AISI 304AISI 304Zinc plated steel
40 AISI 304Zinc plated steel
59161611602611682611612611692
- Material : reinforced polyamide PA FV (black).- Weight : 0,30 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
CodePart.
BoreDf
mmBolts
material
Tubedimensions
mm
38x38
40x40
Tests performed at tightening torque : - 3,5 Kgm ( for Part. 280)- 1 Kgm ( for Part. 141)
• Assembly of Part. 415
• Deflection of Part. 280 - 14148,3 (1"1/2)60,3 (2")
CodePart.
141
Bore dia.Df
mm
60,3 65660
- Material : head in reinforced polyamide PA FV (black). Fixing nuts in zinc plated steel.- State of supply : without tube tightening screws.- Weight : 0,53 Kg.- Max recommended tightening torque : 1 Kgm.- Packaging : 8 pieces.
Tubedia.mm
60,3 (2")
For round tubes
For round tubes
For round tubesFor round and square tubes
• Assembly of Part. 198 (with square tubes)
Part. 564
Tube 40
Part. 611
Part. 198
• Assembly of Part. 198 (with round tubes)
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
100
P
P
Tests performed at tightening torque : 2 Kgm
Part. 415 (P = 1500 N)Part. 198- Ø 48,3 (P = 1900 N)Part. 198- 38 (P = 4400 N)Part. 198- 40 (P = 2300 N)
Part. 280 (P = 1900 N)Part. 141 (P = 5800 N)
• Deflection of Part. 415 - 198
• Assembly of Part. 280
• Assembly of Part. 141
• Sliding load resistance • Sliding load resistance
42 43
Conveyor Components Conveyor Components
Part. 415
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
Part. 615
Part. 198
Part. 198
Part. 199
Part. 616-619
Part. 280
Part. 199
Part. 141
18
Df+
0,2
0
6560
M8
45
5070
65
8,5
25 M8
70 Df+
0,2
0
7095
95
9
7480
*
*
990
93
3098
5565
92 116
Df+
0,2
0
140
6591,5
116
140
89,5
78
M8
M8 seat set screw for tube locking
Df+
0,2
0
Part.
415
Part.
141
Part. 280
Part. 198
Part. 280
Part. 141
Part. 415
Part. 198
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
CodePart.
280
Bore dia.Df
mm
48,360,3
6350366781
- Material : reinforced polyamide PA FV (black).- Weight : 0,40 Kg.- Max recommended tightening torque : 3,5 Kgm.- Packaging : 8 pieces.
Boltsmaterial
AISI 304AISI 304
100
P
P
To obtain the fixing centreholes with dimensions(92 x 55 mm) break out thethickness of diaphragm.
*
Tubedia.mm
BEARING HEADS BEARING HEADS
Bearing head
Bearing head Bearing head
Bearing head
CodePart.
415
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 69658
- Material : reinforced polyamide PA FV (black).- Weight : 0,12 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
Boltsmaterial
AISI 304
198
dia. 48,3dia. 48,3 (1"1/2)
38
AISI 304AISI 304Zinc plated steel
40 AISI 304Zinc plated steel
59161611602611682611612611692
- Material : reinforced polyamide PA FV (black).- Weight : 0,30 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
CodePart.
BoreDf
mmBolts
material
Tubedimensions
mm
38x38
40x40
Tests performed at tightening torque : - 3,5 Kgm ( for Part. 280)- 1 Kgm ( for Part. 141)
• Assembly of Part. 415
• Deflection of Part. 280 - 14148,3 (1"1/2)60,3 (2")
CodePart.
141
Bore dia.Df
mm
60,3 65660
- Material : head in reinforced polyamide PA FV (black). Fixing nuts in zinc plated steel.- State of supply : without tube tightening screws.- Weight : 0,53 Kg.- Max recommended tightening torque : 1 Kgm.- Packaging : 8 pieces.
Tubedia.mm
60,3 (2")
For round tubes
For round tubes
For round tubesFor round and square tubes
• Assembly of Part. 198 (with square tubes)
Part. 564
Tube 40
Part. 611
Part. 198
• Assembly of Part. 198 (with round tubes)
Load P (Newton)20001000 3000 40000
1
2
3
4
5
Defle
ctio
n (m
m)
100
P
P
Tests performed at tightening torque : 2 Kgm
Part. 415 (P = 1500 N)Part. 198- Ø 48,3 (P = 1900 N)Part. 198- 38 (P = 4400 N)Part. 198- 40 (P = 2300 N)
Part. 280 (P = 1900 N)Part. 141 (P = 5800 N)
• Deflection of Part. 415 - 198
• Assembly of Part. 280
• Assembly of Part. 141
• Sliding load resistance • Sliding load resistance
44 45
Conveyor Components Conveyor Components
Part. 415
Part. 198
Part. 168
Part. 137 - 562
Part. 615
Part. 615
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
ø 26,9 (3/4")
ø 32
0ø
344
ø 60
Df
M8
65100
133÷140
ø50
M12
max
.
min
.
85
145
ø 44
8ø
490
ø 80
M12
Df+0,2
0
M16M16
54
54
Part. 98-132-133-172-323
Detail of the insert for thelevelers
+0,20
ø 33,7
350
ø 40
ø 33,7
Df+0,2
0
Please refer to ROBO® catalogue for dimensions andcharacteristics
Part. 418Part. 615
• Protective cap prevents entry of dirt and protects thread. During adjustment of the foot, the protective cap follows the movement of the spindle.
P = 3600 N P = 7000 N
P
- Material : support base and foot plate in reinforced polyamide PA FV (black). Spindle in stainless steel AISI 303. Protective spindle cap in polyamide PA (black). Nickel plated brass threaded bushings. Anti-slip disc in black NBR rubber (70 shore).- Weight : 0,81 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 8 pieces.
P
P = 8000 N
• Sliding load resistance
• Types of levelers that can be used
P = 10000 N
P P
When applied on Part. 418 this can be used withdia. 26,9 mm tubes(3/4" pipes).
SUPPORT BASES SUPPORT BASES
Support base (tripod)
For round tubesFor round tubes
Support base (tripod)
• Max applicable load
• Sliding load resistance
Tests performed at tightening torque : 3,6 Kgm
Tests performed at tightening torque : 2 Kgm
Tests performed at tightening torque : 2 Kgm
CodePart.
418
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 614201
Boltsmaterial
AISI 304
• Assembly of Part. 418
• Assembly Part. 420
• Assembly of Part. 615
• Sliding load resistance • Max applicable load
Part. 420
420 0,02
CodePart.Weight
Kg
- Material : polyamide PA (black).- Packaging : 24 pieces.P
P = 3200 N
Bore dia.Df
mm
26,9
Tubedia.mm
26,9 (3/4")
Reduction bushing
Accessories
Part. 418
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,45 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 8 pieces.
CodePart.
615
Tubedia.mm
624242624252624262624272621522
Bore dia.Df
mm
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
615
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
• Bolts in stainless steel AISI 304
• Bolts in zinc plated steel638742638752638762638772638782
63108*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
44 45
Conveyor Components Conveyor Components
Part. 415
Part. 198
Part. 168
Part. 137 - 562
Part. 615
Part. 615
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
ø 26,9 (3/4")
ø 32
0ø
344
ø 60
Df
M8
65100
133÷140
ø50
M12
max
.
min
.
85
145
ø 44
8ø
490
ø 80
M12
Df+0,2
0
M16M16
54
54
Part. 98-132-133-172-323
Detail of the insert for thelevelers
+0,20
ø 33,7
350
ø 40
ø 33,7
Df+0,2
0
Please refer to ROBO® catalogue for dimensions andcharacteristics
Part. 418Part. 615
• Protective cap prevents entry of dirt and protects thread. During adjustment of the foot, the protective cap follows the movement of the spindle.
P = 3600 N P = 7000 N
P
- Material : support base and foot plate in reinforced polyamide PA FV (black). Spindle in stainless steel AISI 303. Protective spindle cap in polyamide PA (black). Nickel plated brass threaded bushings. Anti-slip disc in black NBR rubber (70 shore).- Weight : 0,81 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 8 pieces.
P
P = 8000 N
• Sliding load resistance
• Types of levelers that can be used
P = 10000 N
P P
When applied on Part. 418 this can be used withdia. 26,9 mm tubes(3/4" pipes).
SUPPORT BASES SUPPORT BASES
Support base (tripod)
For round tubesFor round tubes
Support base (tripod)
• Max applicable load
• Sliding load resistance
Tests performed at tightening torque : 3,6 Kgm
Tests performed at tightening torque : 2 Kgm
Tests performed at tightening torque : 2 Kgm
CodePart.
418
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 614201
Boltsmaterial
AISI 304
• Assembly of Part. 418
• Assembly Part. 420
• Assembly of Part. 615
• Sliding load resistance • Max applicable load
Part. 420
420 0,02
CodePart.Weight
Kg
- Material : polyamide PA (black).- Packaging : 24 pieces.P
P = 3200 N
Bore dia.Df
mm
26,9
Tubedia.mm
26,9 (3/4")
Reduction bushing
Accessories
Part. 418
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,45 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 8 pieces.
CodePart.
615
Tubedia.mm
624242624252624262624272621522
Bore dia.Df
mm
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
615
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
• Bolts in stainless steel AISI 304
• Bolts in zinc plated steel638742638752638762638772638782
63108*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
46 47
Conveyor Components Conveyor Components
Part. 618
Part. 199
Part. 168Part. 409
Part. 137-562
Part. 415
Part. 416
Part. 419
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
ø 26,9 (3/4")
280
304
ø 60 Df+
0,2
0
M8
65100
133÷140
ø 50
M12
388
430
M8 n° 4
85
135
92 Df+
0,2
0
85
145
448
490
ø 80
M12
Df+
0,2
0
M16
54
M16
54
Detail of the insert for the levelers
Detail of the insert for the levelers
M16
54M
16
54
Part. 98-132-133-172-323
350
ø 40
ø 33,7
Df+0,2
0
max
.
min
.
ø 33,7
When applied on Part. 419 this can be used withdia. 26,9 mm tubes(3/4" pipes).
Part. 611
Part. 419
611
615542
615552
615562
- Material : support base in reinforced polyamide PA FV (black), bolts in stainless steel AISI 304, tightening bushes in nickel plated brass, brass threaded bushings.- Max recommended tightening torque : 2,5 Kgm.- Weight : 0,9 Kg.- Packaging : 10 pieces (20 half bases).
Code
Part.Closedversion
616082
616092
616102
Openversion
BoreDf
mm
- Material : support base and foot plate in reinforced polyamide PA FV (black). Spindle in stainless steel AISI 303. Protective spindle cap in polyamide PA (black). Nickel plated brass threaded bushings. Anti-slip disc in black NBR rubber (70 shore).- Weight : 0,57 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 12 pieces.
40 x40
50 x50
60 x60
40
50
60
Part. 618
PP
Closed version Easy to clean
Open version
SUPPORT BASES SUPPORT BASES
Support base (bipod)
Support base (bipod)
Tubedimensions
mm
• Part. 611 available versions
Support base (bipod)
CodePart.
419
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 614211
Boltsmaterial
Inox AISI 304
• Assembly of Part. 618
• Sliding load resistance • Max applicable load
For round tubes
For round tubes
For square tubes
• Assembly of Part. 611
Part. 564
Tube 40
Part. 611
Part. 198
Part. 199
Part. 420Reduction bushing
Accessories
Tests performed at tightening torque : 3,6 Kgm (Part. 618),2,5 Kgm (Part. 611)
Part. 618 (P = 9600 N)Part. 611 (P = 8000 N)
Part. 618 (P = 8000 N)Part. 611 (P = 8000 N)
• Protective cap prevents entry of dirt and protects thread. During adjustment of the foot, the protective cap follows the movement of the spindle.
P = 3600 N P = 7000 N
• Sliding load resistance
Tests performed at tightening torque : 2 Kgm
Tests performed at tightening torque : 2 Kgm
• Assembly of Part. 419
• Assembly of Part. 420
• Sliding load resistance • Max applicable load
P
P = 3200 N
P P
420 0,02
CodePart.Weight
Kg
- Material : polyamide PA (black).- Packaging : 24 pieces.
Bore dia.Df
mm
26,9
Tubedia.mm
26,9 (3/4")
Please refer to ROBO® catalogue for dimensions andcharacteristics
• Types of levelers that can be used
CodePart.
618
Tubedia.mm
Bore dia.Df
mm
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
618
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
• Bolts in stainless steel AISI 304
• Bolts in zinc plated steel
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
624282624292624302624312624322
638792638802638812638822638832
63108*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
46 47
Conveyor Components Conveyor Components
Part. 618
Part. 199
Part. 168Part. 409
Part. 137-562
Part. 415
Part. 416
Part. 419
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
ø 26,9 (3/4")
280
304
ø 60 Df+
0,2
0
M8
65100
133÷140
ø 50
M12
388
430
M8 n° 4
85
135
92 Df+
0,2
0
85
145
448
490
ø 80
M12
Df+
0,2
0
M16
54
M16
54
Detail of the insert for the levelers
Detail of the insert for the levelers
M16
54
M16
54
Part. 98-132-133-172-323
350
ø 40
ø 33,7
Df+0,2
0
max
.
min
.
ø 33,7
When applied on Part. 419 this can be used withdia. 26,9 mm tubes(3/4" pipes).
Part. 611
Part. 419
611
615542
615552
615562
- Material : support base in reinforced polyamide PA FV (black), bolts in stainless steel AISI 304, tightening bushes in nickel plated brass, brass threaded bushings.- Max recommended tightening torque : 2,5 Kgm.- Weight : 0,9 Kg.- Packaging : 10 pieces (20 half bases).
Code
Part.Closedversion
616082
616092
616102
Openversion
BoreDf
mm
- Material : support base and foot plate in reinforced polyamide PA FV (black). Spindle in stainless steel AISI 303. Protective spindle cap in polyamide PA (black). Nickel plated brass threaded bushings. Anti-slip disc in black NBR rubber (70 shore).- Weight : 0,57 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 12 pieces.
40 x40
50 x50
60 x60
40
50
60
Part. 618
PP
Closed version Easy to clean
Open version
SUPPORT BASES SUPPORT BASES
Support base (bipod)
Support base (bipod)
Tubedimensions
mm
• Part. 611 available versions
Support base (bipod)
CodePart.
419
Bore dia.Df
mm
33,7
Tubedia.mm
33,7 (1") 614211
Boltsmaterial
Inox AISI 304
• Assembly of Part. 618
• Sliding load resistance • Max applicable load
For round tubes
For round tubes
For square tubes
• Assembly of Part. 611
Part. 564
Tube 40
Part. 611
Part. 198
Part. 199
Part. 420Reduction bushing
Accessories
Tests performed at tightening torque : 3,6 Kgm (Part. 618),2,5 Kgm (Part. 611)
Part. 618 (P = 9600 N)Part. 611 (P = 8000 N)
Part. 618 (P = 8000 N)Part. 611 (P = 8000 N)
• Protective cap prevents entry of dirt and protects thread. During adjustment of the foot, the protective cap follows the movement of the spindle.
P = 3600 N P = 7000 N
• Sliding load resistance
Tests performed at tightening torque : 2 Kgm
Tests performed at tightening torque : 2 Kgm
• Assembly of Part. 419
• Assembly of Part. 420
• Sliding load resistance • Max applicable load
P
P = 3200 N
P P
420 0,02
CodePart.Weight
Kg
- Material : polyamide PA (black).- Packaging : 24 pieces.
Bore dia.Df
mm
26,9
Tubedia.mm
26,9 (3/4")
Please refer to ROBO® catalogue for dimensions andcharacteristics
• Types of levelers that can be used
CodePart.
618
Tubedia.mm
Bore dia.Df
mm
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
618
38,142,448,350,860,3
38,142,4 (1"1/4)48,3 (1"1/2)50,860,3 (2")
• Bolts in stainless steel AISI 304
• Bolts in zinc plated steel
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
624282624292624302624312624322
638792638802638812638822638832
63108*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
48 49
Conveyor Components Conveyor Components
Part. 619 Part. 119 B
40x80x2
Part. 168
Part. 141
Part. 280
Part. 616
Part. 119Bø 60,3ø 60,3
85145
35
ø 44
8ø
490
ø 80
M12
Df+
0,2
0 Df1+
0,2
0
70
104
ø 448ø 490
M12Df
+0,20
Df1+0,2
0
70104
8535
145
ø 80
89150
13 44
75
72
80
M12
50
35
Df+0,2
0
ø 81
tube 40x80x2
ø 460ø 490
M16
59
1000
ø 60,1
ø 81
M8
2682
0,05–+
Df+0,2
0
ø 70
ø 60
5L
Df+0,2
0
M16
54
M16
M16
54
54
M16
59
Detail of the insert for the levelers
Part. 98-132-133-172-323
1000
Part. 98-132-133-172-323
Please refer to ROBO® catalogue for dimensions andcharacteristics
Detail of the insert for the levelers
Part. 619
PP
Part. 616
SUPPORT BASES SUPPORT BASES
Support base (bipod)
Support base (bipod)
Part. 119 B
P P
119B AISI 304Zinc plated steelAISI 304Zinc plated steel
5443154441
54411544216200061990
- Material : support base in reinforced polyamide PA FV (black). Brass threaded bushings.- Weight : 1,2 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
AISI 304Zinc plated steel
CodePart.Bolts
material
With blind bore
Breaking the diaphragm and deburring hole.• Fixing to floor
Load P (Newton)1200600 18000
10
20
30
40
Defle
ctio
n (m
m)
P
Support base (bipod)
Reduction bushing
Reduction bushing
42,4
48,3
60,3
Bore dia.Df
mm
Tubedia.mm
60,3 (2")
48,3 (1"1/2)
42,4 (1"1/4)
• Sliding load resistance (bases with through bore)
Tests performed at tightening torque : 3,6 Kgm
119BAISI 304Zinc plated steel
621306212060,360,3 (2")
Part. 146
Part. 124
146 0,36
CodePart.Weight
Kg
124 0,10
CodePart.L
mmWeight
Kg
61980
61970
51361*61770
5050,6
- Material : polyamide PA (black).- Packaging : 10 pieces.
85
5085
8585
- Material : bushing in aluminium, bolt in stainless steel AISI 304, nut in nickel plated brass.- Neck painted black.- Max recommended tightening torque : 2,3 Kgm.- Sliding load resistance : 8800 N.- Packaging : 4 pieces.
5050,6
Bore dia.Df
mm
Tubedia.mm
42,442,4 (1"1/4)
48,348,3 (1"1/2)
Bore dia.Df
mm
Tubedimensions
mm
48,3Ø 48,3 (1"1/2)
• With through bore
• Bolts in stainless steel AISI 304
• With blind bore
• Assembly of Part. 619 - 616 • Assembly of Part. 119 B
Part. 619 (P = 8000 N)Part. 616 (P = 8000 N)
Part. 619 (P = 8000 N)Part. 616 (P = 8000 N)
Part. 616
Part. 619
P = 8000 NP = 8000 N
• Sliding load resistance • Max applicable load
• Max applicable load
• Deflection
Load P (Newton)1200600 18000
10
20
30
40De
flect
ion
(mm
)P
Tests performed at tightening torque : 3,6 Kgm
Part. 616 offers a better rigidity than Part. 619• Deflection
• Types of levelers that can be used
When applied on Part. 119 B with bore Df= 60,3, mm this can be used with dia. 42,4-48,3-50-50,6 mmtubes.
When applied on Part. 119 B with bore Df= 60,3, mm this can be used with dia. 48,3 mm tubes.
• Assembly of Part. 124 • Assembly of Part. 146
For round tubes
Accessories
In aluminium
For round tubes
ø 42,4-48,3-50-50,6 ø 48,3
• Bolts in stainless steel AISI 304
CodePart.
• Bolts in zinc plated steel
619
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
Bore dia.Df 1mm
42,4 (1"1/4) 42,4
42,4
42,4
42,4
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
60,3
50,8
48,3
42,4
619
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)42,4 (1"1/4) 42,4
42,4
42,4
42,460,3
50,8
48,3
42,4
CodePart.
• Bolts in zinc plated steel
616
624552
624522
624492
624472
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
Bore dia.Df 1mm
42,4 (1"1/4) 42,4
42,4
42,4
42,4
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
60,3
50,8
48,3
42,4
616
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)42,4 (1"1/4) 42,4
42,4
42,4
42,460,3
50,8
48,3
42,4
Please refer to ROBO® catalogue for dimensions andcharacteristics
• Types of levelers that can be used
For round tubes
638912
638902
638892
638882
624432
624402
624372
624352
638872
638862
638852
638842
692711*
67100*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
48 49
Conveyor Components Conveyor Components
Part. 619 Part. 119 B
40x80x2
Part. 168
Part. 141
Part. 280
Part. 616
Part. 119 Bø 60,3ø 60,3
85145
35
ø 44
8ø
490
ø 80
M12
Df+
0,2
0 Df1+
0,2
0
70
104
ø 448ø 490
M12Df
+0,20
Df1+0,2
0
70104
8535
145
ø 80
89150
13 44
75
72
80
M12
50
35
Df+0,2
0
ø 81
tube 40x80x2
ø 460ø 490
M16
59
1000
ø 60,1
ø 81
M8
2682
0,05–+
Df+0,2
0
ø 70
ø 60
5L
Df+0,2
0
M16
54
M16
M16
54
54
M16
59
Detail of the insert for the levelers
Part. 98-132-133-172-323
1000
Part. 98-132-133-172-323
Please refer to ROBO® catalogue for dimensions andcharacteristics
Detail of the insert for the levelers
Part. 619
PP
Part. 616
SUPPORT BASES SUPPORT BASES
Support base (bipod)
Support base (bipod)
Part. 119 B
P P
119B AISI 304Zinc plated steelAISI 304Zinc plated steel
5443154441
54411544216200061990
- Material : support base in reinforced polyamide PA FV (black). Brass threaded bushings.- Weight : 1,2 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
AISI 304Zinc plated steel
CodePart.Bolts
material
With blind bore
Breaking the diaphragm and deburring hole.• Fixing to floor
Load P (Newton)1200600 18000
10
20
30
40
Defle
ctio
n (m
m)
P
Support base (bipod)
Reduction bushing
Reduction bushing
42,4
48,3
60,3
Bore dia.Df
mm
Tubedia.mm
60,3 (2")
48,3 (1"1/2)
42,4 (1"1/4)
• Sliding load resistance (bases with through bore)
Tests performed at tightening torque : 3,6 Kgm
119BAISI 304Zinc plated steel
621306212060,360,3 (2")
Part. 146
Part. 124
146 0,36
CodePart.Weight
Kg
124 0,10
CodePart.L
mmWeight
Kg
61980
61970
51361*61770
5050,6
- Material : polyamide PA (black).- Packaging : 10 pieces.
85
5085
8585
- Material : bushing in aluminium, bolt in stainless steel AISI 304, nut in nickel plated brass.- Neck painted black.- Max recommended tightening torque : 2,3 Kgm.- Sliding load resistance : 8800 N.- Packaging : 4 pieces.
5050,6
Bore dia.Df
mm
Tubedia.mm
42,442,4 (1"1/4)
48,348,3 (1"1/2)
Bore dia.Df
mm
Tubedimensions
mm
48,3Ø 48,3 (1"1/2)
• With through bore
• Bolts in stainless steel AISI 304
• With blind bore
• Assembly of Part. 619 - 616 • Assembly of Part. 119 B
Part. 619 (P = 8000 N)Part. 616 (P = 8000 N)
Part. 619 (P = 8000 N)Part. 616 (P = 8000 N)
Part. 616
Part. 619
P = 8000 NP = 8000 N
• Sliding load resistance • Max applicable load
• Max applicable load
• Deflection
Load P (Newton)1200600 18000
10
20
30
40
Defle
ctio
n (m
m)
P
Tests performed at tightening torque : 3,6 Kgm
Part. 616 offers a better rigidity than Part. 619• Deflection
• Types of levelers that can be used
When applied on Part. 119 B with bore Df= 60,3, mm this can be used with dia. 42,4-48,3-50-50,6 mmtubes.
When applied on Part. 119 B with bore Df= 60,3, mm this can be used with dia. 48,3 mm tubes.
• Assembly of Part. 124 • Assembly of Part. 146
For round tubes
Accessories
In aluminium
For round tubes
ø 42,4-48,3-50-50,6 ø 48,3
• Bolts in stainless steel AISI 304
CodePart.
• Bolts in zinc plated steel
619
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
Bore dia.Df 1mm
42,4 (1"1/4) 42,4
42,4
42,4
42,4
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
60,3
50,8
48,3
42,4
619
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)42,4 (1"1/4) 42,4
42,4
42,4
42,460,3
50,8
48,3
42,4
CodePart.
• Bolts in zinc plated steel
616
624552
624522
624492
624472
- Material : support base in reinforced polyamide PA FV (black), brass threaded bushings.- Weight : 1,05 Kg.- Max recommended tightening torque : 3,6 Kgm.- Packaging : 12 pieces.
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
Bore dia.Df 1mm
42,4 (1"1/4) 42,4
42,4
42,4
42,4
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
60,3
50,8
48,3
42,4
616
60,3 (2")
50,8
48,3 (1"1/2) 42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)
42,4 (1"1/4)42,4 (1"1/4) 42,4
42,4
42,4
42,460,3
50,8
48,3
42,4
Please refer to ROBO® catalogue for dimensions andcharacteristics
• Types of levelers that can be used
For round tubes
638912
638902
638892
638882
624432
624402
624372
624352
638872
638862
638852
638842
692711*
67100*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
50 51
Conveyor Components Conveyor Components
Example of assembly with vertical tubes ø 33,7 mm
Example of assembly with vertical tubes ø 60,3 mm
Example of assembly with vertical tubes ø 48,3 mm
134
84
68,3
Df 1
609044
M8
+0,
20
Df+0,2
0
146
96
80,3
Df 1
60
9551
M8
+0,
20
Df+0,2
0
151
96
5560
96
70Df
1
M8
+0,
20
Df+0,2
0
Example of assembly with vertical tubes 40 mm
For round tubes
For round tubes
CONNECTING JOINTS CONNECTING JOINTS
• Assembly of Part. 562
• Assembly of Part. 563
Connecting joint
Connecting joint
Tests performed at tightening torque : 1,5 Kgm
• Sliding load resistance
Part. 562
562
38,1
38,1
38,1
697831605852697841
607092605862
697851607102
697861
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass. - Weight : 0,4 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
CodePart.
CodePart.
Part. 563
563
50,8697871605892605872
605882605562
697881697891
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass. - Weight : 0,5 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
33,7 (1") 33,7 (1")
33,7 (1")
Bore dia.Df 1mm
33,7
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
33,7
33,742,433,7
38,142,4
48,3
48,3
48,348,3
48,3
33,7
42,448,3
60,3
60,3
60,360,3
60,3
33,7
42,448,3
50,8
50,850,8
33,7 (1") 33,738,138,138,1
42,4 (1"1/4)
42,4 (1"1/4)48,3 (1"1/2)
33,7 (1")
48,3 (1"1/2)
60,3 (2")
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
33,7 (1")
42,4 (1"1/4)
48,3 (1"1/2)33,7 (1")
42,4 (1"1/4)
48,3 (1"1/2)60,3 (2")
P
P1
Part. 562 (P = 2000 N) - (P1 = 3500 N)Part. 563 (P = 1500 N) - (P1 = 3000 N)
Part. 563
Part. 615 - 618
Part. 280 Part. 141
Part. 562
Part. 615 - 618
Part. 198 - 280
ø 60,3 (2")
Part. 562
Part. 415 Part. 416
Part. 199
Part. 418 - 419
ø 33,7 (1")
ø 33,7 (1")
ø 33,7 (1") - ø 38,1 -
ø 42,4 (1"1/4) - ø 48,3 (1"1/2)
ø 33,7 (1") - ø 42,4 (1"1/4) -
ø 48,3 (1"1/2) - ø 60,3 (2")
ø 48,3 (1"1/2)
• Assembly of Part. 564Connecting joint
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass.- Weight : 0,5 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
Part. 564
For square tubes
698531
698541
607112
Code
564
Part.
BoreDf
mm
38 x38
40 x40
45 x45
38
40
45
BoreDf1mm
38
40
45
69855150 x50 50 50
Tubedimensions
mm
Part. 564
40
Part. 611
Part. 198
40
Part. 199 Part. 168
50 51
Conveyor Components Conveyor Components
Example of assembly with vertical tubes ø 33,7 mm
Example of assembly with vertical tubes ø 60,3 mm
Example of assembly with vertical tubes ø 48,3 mm
134
84
68,3
Df 1
609044
M8
+0,
20
Df+0,2
0
146
96
80,3
Df 1
60
9551
M8
+0,
20
Df+0,2
0
151
96
5560
96
70Df
1
M8
+0,
20
Df+0,2
0
Example of assembly with vertical tubes 40 mm
For round tubes
For round tubes
CONNECTING JOINTS CONNECTING JOINTS
• Assembly of Part. 562
• Assembly of Part. 563
Connecting joint
Connecting joint
Tests performed at tightening torque : 1,5 Kgm
• Sliding load resistance
Part. 562
562
38,1
38,1
38,1
697831605852697841
607092605862
697851607102
697861
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass. - Weight : 0,4 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
CodePart.
CodePart.
Part. 563
563
50,8697871605892605872
605882605562
697881697891
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass. - Weight : 0,5 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
33,7 (1") 33,7 (1")
33,7 (1")
Bore dia.Df 1mm
33,7
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
33,7
33,742,433,7
38,142,4
48,3
48,3
48,348,3
48,3
33,7
42,448,3
60,3
60,3
60,360,3
60,3
33,7
42,448,3
50,8
50,850,8
33,7 (1") 33,738,138,138,1
42,4 (1"1/4)
42,4 (1"1/4)48,3 (1"1/2)
33,7 (1")
48,3 (1"1/2)
60,3 (2")
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
33,7 (1")
42,4 (1"1/4)
48,3 (1"1/2)33,7 (1")
42,4 (1"1/4)
48,3 (1"1/2)60,3 (2")
P
P1
Part. 562 (P = 2000 N) - (P1 = 3500 N)Part. 563 (P = 1500 N) - (P1 = 3000 N)
Part. 563
Part. 615 - 618
Part. 280 Part. 141
Part. 562
Part. 615 - 618
Part. 198 - 280
ø 60,3 (2")
Part. 562
Part. 415 Part. 416
Part. 199
Part. 418 - 419
ø 33,7 (1")
ø 33,7 (1")
ø 33,7 (1") - ø 38,1 -
ø 42,4 (1"1/4) - ø 48,3 (1"1/2)
ø 33,7 (1") - ø 42,4 (1"1/4) -
ø 48,3 (1"1/2) - ø 60,3 (2")
ø 48,3 (1"1/2)
• Assembly of Part. 564Connecting joint
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, nuts in nickel plated brass.- Weight : 0,5 Kg.- Max recommended tightening torque : 1,5 Kgm.- Packaging : 8 pieces.
Part. 564
For square tubes
698531
698541
607112
Code
564
Part.
BoreDf
mm
38 x38
40 x40
45 x45
38
40
45
BoreDf1mm
38
40
45
69855150 x50 50 50
Tubedimensions
mm
Part. 564
40
Part. 611
Part. 198
40
Part. 199 Part. 168
52 53
Conveyor Components Conveyor Components
Part. 415
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
60
Df 1
62
M8
9130 38
+0,
20
Df+
0,2
0
Example of assembly with vertical tubes ø 42,4 mm
Example of assembly with vertical tubes ø 60,3 mm
Example of assembly with vertical tubes ø 48,3 mm
74
Df 1
74
M8
11337 45
+0,
20
Df+
0,2
0
84
Df 1
84
M8
12842 40
+0,
20
Df+
0,2
0
CONNECTING JOINTS CONNECTING JOINTS
Connecting joint
Connecting joint
Connecting joint
For round tubes
For round tubes
For round tubes
Part. 454
100
P
Load P (Newton)700500 900 1100 1300300
1
3
7
5
Defle
ctio
n (m
m)
Part. 417 Part. 137
33,7 (1") 33,742,442,4 (1"1/4)454 69378
- Material : joint in reinforced polyamide PA FV (black). Tightening bolts in stainless steel AISI 304.- Weight : 0,36 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 12 pieces.
CodePart.
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
42,4
42,460,3
48,3
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
48,3 (1"1/2)
CodePart.
1376681365020
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, cadmium plated brass threaded bushings.- Weight : 0,44 Kg.- Max recommended tightening torque : 1 Kgm.- Packaging : 8 pieces.
60,3 (2") 42,4 (1"1/4)
42,4 (1"1/4)
• Assembly of Part. 454
Tests performed at tightening torque : 2 Kgm
• Sliding load resistance
P = 500 NP1 = 800 N
P1
P
• Assembly of Part. 417
Tests performed at tightening torque : 1 Kgm
• Sliding load resistance
• Deflection
P = 1000 N
P
Tests performed at tightening torque : 2 Kgm
• Sliding load resistance
P = 500 N
P
• Assembly of Part. 137
Part. 137
Part. 615 - 618
Part. 280 Part. 141
Part. 137
Part. 615 - 618
Part. 198 - 280
ø 60,3 (2")
Part. 199
ø 42,4 (1"1/4)
ø 42,4 (1"1/4)
ø 48,3 (1"1/2)
26,9 (3/4") 26,933,733,7 (1")417 69368
CodePart.
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
- Material : joint in reinforced polyamide PA FV (black). Tightening bolts in stainless steel AISI 304.- Weight : 0,21 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
Part. 454
Part. 615 - 618
ø 42,4 (1"1/4)
ø 33,7 (1")
Part. 168
52 53
Conveyor Components Conveyor Components
Part. 415
Part. 416
Part. 419
Part. 417
Part. 420
Part. 418
ø 33,7 (1")ø 26,9 (3/4")
60
Df 1
62
M8
9130 38
+0,
20
Df+
0,2
0
Example of assembly with vertical tubes ø 42,4 mm
Example of assembly with vertical tubes ø 60,3 mm
Example of assembly with vertical tubes ø 48,3 mm
74
Df 1
74
M8
11337 45
+0,
20
Df+
0,2
0
84
Df 1
84
M8
12842 40
+0,
20
Df+
0,2
0
CONNECTING JOINTS CONNECTING JOINTS
Connecting joint
Connecting joint
Connecting joint
For round tubes
For round tubes
For round tubes
Part. 454
100
P
Load P (Newton)700500 900 1100 1300300
1
3
7
5
Defle
ctio
n (m
m)
Part. 417 Part. 137
33,7 (1") 33,742,442,4 (1"1/4)454 69378
- Material : joint in reinforced polyamide PA FV (black). Tightening bolts in stainless steel AISI 304.- Weight : 0,36 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 12 pieces.
CodePart.
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
42,4
42,460,3
48,3
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
48,3 (1"1/2)
CodePart.
1376681365020
- Material : joint in reinforced polyamide PA FV (black). Tightening screws in stainless steel AISI 304, cadmium plated brass threaded bushings.- Weight : 0,44 Kg.- Max recommended tightening torque : 1 Kgm.- Packaging : 8 pieces.
60,3 (2") 42,4 (1"1/4)
42,4 (1"1/4)
• Assembly of Part. 454
Tests performed at tightening torque : 2 Kgm
• Sliding load resistance
P = 500 NP1 = 800 N
P1
P
• Assembly of Part. 417
Tests performed at tightening torque : 1 Kgm
• Sliding load resistance
• Deflection
P = 1000 N
P
Tests performed at tightening torque : 2 Kgm
• Sliding load resistance
P = 500 N
P
• Assembly of Part. 137
Part. 137
Part. 615 - 618
Part. 280 Part. 141
Part. 137
Part. 615 - 618
Part. 198 - 280
ø 60,3 (2")
Part. 199
ø 42,4 (1"1/4)
ø 42,4 (1"1/4)
ø 48,3 (1"1/2)
26,9 (3/4") 26,933,733,7 (1")417 69368
CodePart.
Bore dia.Df 1mm
Vertical tubedia.mm
Horizontal tubedia.mm
Bore dia.Df
mm
- Material : joint in reinforced polyamide PA FV (black). Tightening bolts in stainless steel AISI 304.- Weight : 0,21 Kg.- Max recommended tightening torque : 2 Kgm.- Packaging : 24 pieces.
Part. 454
Part. 615 - 618
ø 42,4 (1"1/4)
ø 33,7 (1")
Part. 168
54
Conveyor Components
H
Part. 409Part. 409
Load P (Newton)700500 900 1100 1300300
1
3
7
5
Defle
ctio
n (m
m)
Code
Part. 409
With more than one Ø 60,3 x 42,4 tube (code 63357)at the same point, only 90° joints can be made.
Minimum offset valueH min = 47 ( for code : 63357 - 63347 - 63337)H min = 43 ( for code : 63297 - 63287 - 63277)
Connections can be made at any angle.Offsetting the connections allow entry of the bolt and wrench.
When the screw is tightened the plug expands and locksaxially with the tube.
High sanification. Allows connection joints at any angle.
100
PThe kit consist of1 - Plug.2 - Bolt M 8 x 50 UNI 5931.3 - Connecting joint.4 - Expansion plug.
Part.
409
Tube A dia.Damm
Tube BThickness
mm
38
42,4 (1"1/4)
48,3 (1"1/2)
Tube B dia.Dbmm
383842,4 (1"1/4)
Lmm
63337
60,3 (2")
*
31
33,2
36,2Connecting joint
Expansionplug
Plug42,2
3842,4 (1"1/4)
6329763347
42,4 (1"1/4)
1,5
1,51,5
1,51,5
1,5 63357
- Material : Plug in PVC (black). Bolt in stainless steel AISI 304. Connecting joint in reinforced polyamide PA FV (black). Expansion plug : body in reinforced polyamide PA FV (black), cone in brass.- Weight : 0,29 Kg.- Max recommended tightening torque : 2,5 Kgm.- Packaging : 50 Kit.
* = Various dimensions
CONNECTING JOINTS
Connecting joint • Characteristics
• Assembly of Part. 409
Example of assembly with vertical tubes ø 38,1 and 42,4 mm
Example of assembly with vertical tubes ø 48,3 mm
Example of assembly with vertical tubes ø 60,3 mm
• Assembly
• Offset tube joints
• Coaxial tube joints
• Deflection
Tests performed at tightening torque : 2,5 Kgm
ø 38,1
Part. 615Part. 618
Part. 615Part. 618
Part. 615Part. 618
Part. 615Part. 618
ø 42,4 (1"1/4)
ø 48,3 (1"1/2)
Part. 198Part. 280
Part. 409
Part. 199 Part. 168
Part. 141Part. 280
Part. 409
ø 60,3 (2")
63277*63287*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
54
Conveyor Components
H
Part. 409Part. 409
Load P (Newton)700500 900 1100 1300300
1
3
7
5
Defle
ctio
n (m
m)
Code
Part. 409
With more than one Ø 60,3 x 42,4 tube (code 63357)at the same point, only 90° joints can be made.
Minimum offset valueH min = 47 ( for code : 63357 - 63347 - 63337)H min = 43 ( for code : 63297 - 63287 - 63277)
Connections can be made at any angle.Offsetting the connections allow entry of the bolt and wrench.
When the screw is tightened the plug expands and locksaxially with the tube.
High sanification. Allows connection joints at any angle.
100
PThe kit consist of1 - Plug.2 - Bolt M 8 x 50 UNI 5931.3 - Connecting joint.4 - Expansion plug.
Part.
409
Tube A dia.Damm
Tube BThickness
mm
38
42,4 (1"1/4)
48,3 (1"1/2)
Tube B dia.Dbmm
383842,4 (1"1/4)
Lmm
63337
60,3 (2")
*
31
33,2
36,2Connecting joint
Expansionplug
Plug42,2
3842,4 (1"1/4)
6329763347
42,4 (1"1/4)
1,5
1,51,5
1,51,5
1,5 63357
- Material : Plug in PVC (black). Bolt in stainless steel AISI 304. Connecting joint in reinforced polyamide PA FV (black). Expansion plug : body in reinforced polyamide PA FV (black), cone in brass.- Weight : 0,29 Kg.- Max recommended tightening torque : 2,5 Kgm.- Packaging : 50 Kit.
* = Various dimensions
CONNECTING JOINTS
Connecting joint • Characteristics
• Assembly of Part. 409
Example of assembly with vertical tubes ø 38,1 and 42,4 mm
Example of assembly with vertical tubes ø 48,3 mm
Example of assembly with vertical tubes ø 60,3 mm
• Assembly
• Offset tube joints
• Coaxial tube joints
• Deflection
Tests performed at tightening torque : 2,5 Kgm
ø 38,1
Part. 615Part. 618
Part. 615Part. 618
Part. 615Part. 618
Part. 615Part. 618
ø 42,4 (1"1/4)
ø 48,3 (1"1/2)
Part. 198Part. 280
Part. 409
Part. 199 Part. 168
Part. 141Part. 280
Part. 409
ø 60,3 (2")
63277*63287*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
56 57
Conveyor Components Conveyor Components
Part. 346 - Page 60 Half-round guide rail. Lowside load (brick).
Part. 422 - Page 64 Extra flat guide rail. Ruggedcontainers.
Part. 585 - Page 70 Roller centre guide. Thin-walled containers.
Part. 570-608 - Page 77Divider module for Part. 557-607.
Part. 537 - Page 81 For Part. 539-605-598-580-557-607-581-585-597-628S.
Part. 393 - Page 61 Label protection.
Part. 369 - Page 60 Connecting bar for Part. 346.
Part. 370 - Page 64 Sealing profile for Part. 422. Improves guide cleanliness.
Part. 191-296 - Page 68Extra large guide rail. Assembly with 60x6 mm plate.
Part. 610 - Page 67 Divider module for Part. 598.
Part. 620 - Page 67-73-77 Reinforcing profile for Part. 598-597-607.
Part. 586 - Page 71 Divider module for Part. 585.
Part. 628 S - Page 78 Roller side guide. Rugged con-tainers. Assembly with 40x8.
Part. 535 - Page 81 Bolts set for Part. 539-580-581-628S.
Part. 317 - Page 58 Half-round guide rail. Delicatecontainers (PET empty).
Part. 596 - Page 61 Label protection. Unstablecontainers.
Part. 581 - Page 72 Roller side guide. Thin-walledcontainers.
Part. 570 - Page 75 Divider module for Part. 557.
Part. 128 S - Page 79 Roller side guide. Ruggedcontainers.
Part. 218 - Page 82 Guide rail bending machine (manual ).
Part. 223 - Page 58 Flat guide rail. Middle delicatecontainers (PET full ).
Part. 308 - Page 62 Overhead transport of PETbottles.
Part. 376-377 - Page 68 End plug for Part. 191-296.
Part. 585 - Page 72Roller centre guide. Thin-walled containers.
Part. 580 - Page 76 Roller side guide. Mediumstrength containers.
Part. 128 - Page 79 Roller side guide. Ruggedcontainers.
Part. 233 - Page 82 Rollers for bending.
Part. 219 - Page 59 Round guide rail. Middlestrong containers (glass ).
Part. 273 - Page 63 Extra flat guide rail. Ruggedcontainers.
Part. 378-379 - Page 69 Joint clamp for Part.191-296.
Part. 597 - Page 73 Roller centre guide. Similarto Part. 585. Added stiffener.
Part. 557 - Page 76 Roller centre guide. Mediumstrength containers.
Part. 128 - Page 80 Roller side guide. Ruggedcontainers.
Part. 247 - Page 59 Round guide rail. Middlestrong containers (glass ).
Part. 539 - Page 63 Extra flat guide rail. Assemblywith 40x8 mm plate.
Part. 581 - Page 70 Roller side guide. Thin-walledcontainers.
Part. 586-609 - Page 73 Divider module for Part. 585-597.
Part. 607 - Page 77 Roller centre guide. Similarto Part. 557. Added stiffener.
Part. 128 - Page 80 Roller side guide. Ruggedcontainers.
PRODUCT HANDLING COMPONENTS PRODUCT HANDLING COMPONENTS
Part. 210 -216 -214 -275 -211-446 -215 -213 -217 Page 84÷87Guide rail clamps for Part. 223-317-219-273-393-596-308.
Part. 237 -236 -116 -111 - Page 88÷89Guide rail clamps for Part. 247.
Part. 81-72 - Page 96Bracket.
Part. 542 - Page 105 Adjustable bracket.
Part. 541 - Page 105 Adjustable bracket.
Part. 544 - Page 106 Adjustable bracket.
Part. 543 - Page 107 Adjustable bracket. Swivel head in stainless steel and brass.
Part. 226 -336 - Page 112Drip tray support.
Part. 338 - Page 113Mounting plate for Part.226-336.
Part. 174 Q - Page 115Cross clamp. Round and square holes.
Part. 372 - Page 120 Universal clamp for photocellsor reflectors.
Part. 518 - Page 121Control contact lever.
Part. 587 - Page 117Clamp for round tube.
Part. 255-359-256-192 - Page 108÷109Swivel heads applicable to brackets Part. 193÷540
Part. 587 - Page 117Clamp for square tube.
Part. 342 - Page 118Assembly kit for photocellsor sensor.
Part. 341 - Page 118Clamp for photocellsor sensor.
Part. 341 C - Page 119Clamp for reflectors.
Part. 580 - Page 74 Roller side guide. Mediumstrength containers.
Part. 557 - Page 74 Roller centre guide. Mediumstrength containers.
Part. 88-89 - Page 97Bracket with ratched handleclamping.
Part. 85-10-97 - Page 98Bracket with eccentric lever.
Part. 107 - Page 99Bracket with eyebolt.
Part. 599 - Page 99Bracket with eyebolt.
Part. 617 - Page 100Bracket with eyebolt.
Part. 140 - Page 100 Bracket with eyebolt.
Part. 193 - Page 101Adjustable bracket.
Part. 163 - Page 102Adjustable bracket.
Part. 257 - Page 102Adjustable bracket.
Part. 373 - Page 93Guide rail clamps for Part. 128-128S.
Part. 190 -184 - Page 94 Guide rail clamps for Part. 191.
Part. 298 - Page 95Guide rail clamps for Part. 296.
Part. 178 - Page 103 Adjustable bracket. Swivel head in stainless steel and brass.
Part. 540 - Page 104 Adjustable bracket.
Part. 340 -174 - Page 114Cross clamp. Round holes.
Part. 339-595 - Page 116T clamp.
PRODUCT GUIDES GUIDERAILCLAMPS
GUIDERAILBRACKETS
CONNECTING CLAMPS
Part. 598 - Page 67 Extra flat centre guide. Similarto Part. 605. Added stiffener.
Part. 605 - Page 65 Extra flat centre guide. Glasscontainers without side load.
Part. 606 - Page 65 Divider module for Part. 605.
Part. 605 - Page 66 Extra flat centre guide. Glasscontainers without side load.
Part. 606 - Page 66 Divider module for Part. 605.
SideflexingSideflexing
Reinforced/Straight run
40x8
In aluminium
In aluminium
Sideflexing Sideflexing
Reinforced/Straight run Sideflexing Sideflexing Sideflexing
Sideflexing Sideflexing
Sideflexing Reinforced/Straight run Sideflexing Sideflexing Straight run
Straight run Straight run
210216 214
237 236 116-111
213 217215211-446
275
Part. 82-159 - 437-451-71-70- 50-478 - Page 90÷92Guide rail clamps for round rod dia. 8 to 16 mm.
82 159-437-451 71-70 50
478
255 359 256 192 61 142 545 96
227
Part. 61-142-545 - Page 110÷111 Spacers. Part. 227 - Page 109 Spacer for adjustable brackets. Part. 96 - Page 111 Square washer for Part.72-81-88-89.
56 57
Conveyor Components Conveyor Components
Part. 346 - Page 60 Half-round guide rail. Lowside load (brick).
Part. 422 - Page 64 Extra flat guide rail. Ruggedcontainers.
Part. 585 - Page 70 Roller centre guide. Thin-walled containers.
Part. 570-608 - Page 77Divider module for Part. 557-607.
Part. 537 - Page 81 For Part. 539-605-598-580-557-607-581-585-597-628S.
Part. 393 - Page 61 Label protection.
Part. 369 - Page 60 Connecting bar for Part. 346.
Part. 370 - Page 64 Sealing profile for Part. 422. Improves guide cleanliness.
Part. 191-296 - Page 68Extra large guide rail. Assembly with 60x6 mm plate.
Part. 610 - Page 67 Divider module for Part. 598.
Part. 620 - Page 67-73-77 Reinforcing profile for Part. 598-597-607.
Part. 586 - Page 71 Divider module for Part. 585.
Part. 628 S - Page 78 Roller side guide. Rugged con-tainers. Assembly with 40x8.
Part. 535 - Page 81 Bolts set for Part. 539-580-581-628S.
Part. 317 - Page 58 Half-round guide rail. Delicatecontainers (PET empty).
Part. 596 - Page 61 Label protection. Unstablecontainers.
Part. 581 - Page 72 Roller side guide. Thin-walledcontainers.
Part. 570 - Page 75 Divider module for Part. 557.
Part. 128 S - Page 79 Roller side guide. Ruggedcontainers.
Part. 218 - Page 82 Guide rail bending machine (manual ).
Part. 223 - Page 58 Flat guide rail. Middle delicatecontainers (PET full ).
Part. 308 - Page 62 Overhead transport of PETbottles.
Part. 376-377 - Page 68 End plug for Part. 191-296.
Part. 585 - Page 72Roller centre guide. Thin-walled containers.
Part. 580 - Page 76 Roller side guide. Mediumstrength containers.
Part. 128 - Page 79 Roller side guide. Ruggedcontainers.
Part. 233 - Page 82 Rollers for bending.
Part. 219 - Page 59 Round guide rail. Middlestrong containers (glass ).
Part. 273 - Page 63 Extra flat guide rail. Ruggedcontainers.
Part. 378-379 - Page 69 Joint clamp for Part.191-296.
Part. 597 - Page 73 Roller centre guide. Similarto Part. 585. Added stiffener.
Part. 557 - Page 76 Roller centre guide. Mediumstrength containers.
Part. 128 - Page 80 Roller side guide. Ruggedcontainers.
Part. 247 - Page 59 Round guide rail. Middlestrong containers (glass ).
Part. 539 - Page 63 Extra flat guide rail. Assemblywith 40x8 mm plate.
Part. 581 - Page 70 Roller side guide. Thin-walledcontainers.
Part. 586-609 - Page 73 Divider module for Part. 585-597.
Part. 607 - Page 77 Roller centre guide. Similarto Part. 557. Added stiffener.
Part. 128 - Page 80 Roller side guide. Ruggedcontainers.
PRODUCT HANDLING COMPONENTS PRODUCT HANDLING COMPONENTS
Part. 210 -216 -214 -275 -211-446 -215 -213 -217 Page 84÷87Guide rail clamps for Part. 223-317-219-273-393-596-308.
Part. 237 -236 -116 -111 - Page 88÷89Guide rail clamps for Part. 247.
Part. 81-72 - Page 96Bracket.
Part. 542 - Page 105 Adjustable bracket.
Part. 541 - Page 105 Adjustable bracket.
Part. 544 - Page 106 Adjustable bracket.
Part. 543 - Page 107 Adjustable bracket. Swivel head in stainless steel and brass.
Part. 226 -336 - Page 112Drip tray support.
Part. 338 - Page 113Mounting plate for Part.226-336.
Part. 174 Q - Page 115Cross clamp. Round and square holes.
Part. 372 - Page 120 Universal clamp for photocellsor reflectors.
Part. 518 - Page 121Control contact lever.
Part. 587 - Page 117Clamp for round tube.
Part. 255-359-256-192 - Page 108÷109Swivel heads applicable to brackets Part. 193÷540
Part. 587 - Page 117Clamp for square tube.
Part. 342 - Page 118Assembly kit for photocellsor sensor.
Part. 341 - Page 118Clamp for photocellsor sensor.
Part. 341 C - Page 119Clamp for reflectors.
Part. 580 - Page 74 Roller side guide. Mediumstrength containers.
Part. 557 - Page 74 Roller centre guide. Mediumstrength containers.
Part. 88-89 - Page 97Bracket with ratched handleclamping.
Part. 85-10-97 - Page 98Bracket with eccentric lever.
Part. 107 - Page 99Bracket with eyebolt.
Part. 599 - Page 99Bracket with eyebolt.
Part. 617 - Page 100Bracket with eyebolt.
Part. 140 - Page 100 Bracket with eyebolt.
Part. 193 - Page 101Adjustable bracket.
Part. 163 - Page 102Adjustable bracket.
Part. 257 - Page 102Adjustable bracket.
Part. 373 - Page 93Guide rail clamps for Part. 128-128S.
Part. 190 -184 - Page 94 Guide rail clamps for Part. 191.
Part. 298 - Page 95Guide rail clamps for Part. 296.
Part. 178 - Page 103 Adjustable bracket. Swivel head in stainless steel and brass.
Part. 540 - Page 104 Adjustable bracket.
Part. 340 -174 - Page 114Cross clamp. Round holes.
Part. 339-595 - Page 116T clamp.
PRODUCT GUIDES GUIDERAILCLAMPS
GUIDERAILBRACKETS
CONNECTING CLAMPS
Part. 598 - Page 67 Extra flat centre guide. Similarto Part. 605. Added stiffener.
Part. 605 - Page 65 Extra flat centre guide. Glasscontainers without side load.
Part. 606 - Page 65 Divider module for Part. 605.
Part. 605 - Page 66 Extra flat centre guide. Glasscontainers without side load.
Part. 606 - Page 66 Divider module for Part. 605.
SideflexingSideflexing
Reinforced/Straight run
40x8
In aluminium
In aluminium
Sideflexing Sideflexing
Reinforced/Straight run Sideflexing Sideflexing Sideflexing
Sideflexing Sideflexing
Sideflexing Reinforced/Straight run Sideflexing Sideflexing Straight run
Straight run Straight run
210216 214
237 236 116-111
213 217215211-446
275
Part. 82-159 - 437-451-71-70- 50-478 - Page 90÷92Guide rail clamps for round rod dia. 8 to 16 mm.
82 159-437-451 71-70 50
478
255 359 256 192 61 142 545 96
227
Part. 61-142-545 - Page 110÷111 Spacers. Part. 227 - Page 109 Spacer for adjustable brackets. Part. 96 - Page 111 Square washer for Part.72-81-88-89.
58 59
Conveyor Components Conveyor Components
500
P
A
R 7
H
S
A 11,2
H
S
Part. 317Part. 317
20
10
1,520
R 10
500
P
500
P
Part. 219
Part. 247
Part. 219
Part. 247
Part. 223
Guide rail bendingmachine (manual ) see page 82.
Part. 219Part. 317
Part. 223
Part.
219
Lengthmetres
363
Metal profile material
AISI 304
AISI 304
Zinc plated steel
ThicknessS
mm
1,5601616929263961
2
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
6175367113
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
• Deflection of Part. 317 - 223
• Use of Part. 317 Delicate containers (ex: empty cans, empty PET).
Guide rail (half round)
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Guide railclamps see page 84.
Part.
317
Lengthmetres
36
Metal profile material
AISI 304
AISI 304
ThicknessS
mm
1,56907269302
267103
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
A 11,2
H
S R 20
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
Guide railclamps see page 84.
Part.
223
Lengthmetres
363
Metal profile material
AISI 304
AISI 304
Zinc plated steel
ThicknessS
mm
1,5
2
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
610316940263971
67123
PRODUCT GUIDES PRODUCT GUIDES
Guide rail ( flat)
Guide rail ( round)
Part. 247• Deflection of Part. 247
Part.
247
Lengthmetres
3
Metal profile material
AISI 304Zinc plated steel
6391163921
0,67
Weightkg/mCode
- Plastic profile material : polyethylene PE 500.000 (green).- Min. curvature radius : 145 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 24 metres.- Accessories :
Guide railclamps see page 88.
Guide rail bendingmachine (manual ) see page 82.
Guide rail ( round)
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
• Deflection of Part. 219
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
• Use of Part. 219-247 Medium strength containers (ex: latten, glass ).
Plastic profile of Part. 247 can be disassembled.
Guide rail bendingmachine (manual ) see page 82.
• Use of Part. 223 Middle delicate containers (ex: full PET).
• Assembly of Part. 317-223
Part. 211-446
25x8 plate
67063*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
61743*
58 59
Conveyor Components Conveyor Components
500
P
A
R 7
H
S
A 11,2
H
S
Part. 317Part. 317
20
10
1,520
R 10
500
P
500
P
Part. 219
Part. 247
Part. 219
Part. 247
Part. 223
Guide rail bendingmachine (manual ) see page 82.
Part. 219Part. 317
Part. 223
Part.
219
Lengthmetres
363
Metal profile material
AISI 304
AISI 304
Zinc plated steel
ThicknessS
mm
1,5601616929263961
2
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
6175367113
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
• Deflection of Part. 317 - 223
• Use of Part. 317 Delicate containers (ex: empty cans, empty PET).
Guide rail (half round)
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Guide railclamps see page 84.
Part.
317
Lengthmetres
36
Metal profile material
AISI 304
AISI 304
ThicknessS
mm
1,56907269302
267103
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
A 11,2
H
S R 20
Smm
1,5
Hmm
17,5
Amm
16,52 18 17
Guide railclamps see page 84.
Part.
223
Lengthmetres
363
Metal profile material
AISI 304
AISI 304
Zinc plated steel
ThicknessS
mm
1,5
2
0,54
Weightkg/mCode
36
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
610316940263971
67123
PRODUCT GUIDES PRODUCT GUIDES
Guide rail ( flat)
Guide rail ( round)
Part. 247• Deflection of Part. 247
Part.
247
Lengthmetres
3
Metal profile material
AISI 304Zinc plated steel
6391163921
0,67
Weightkg/mCode
- Plastic profile material : polyethylene PE 500.000 (green).- Min. curvature radius : 145 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 24 metres.- Accessories :
Guide railclamps see page 88.
Guide rail bendingmachine (manual ) see page 82.
Guide rail ( round)
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
• Deflection of Part. 219
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
• Use of Part. 219- 247 Medium strength containers (ex: latten, glass ).
Plastic profile of Part. 247 can be disassembled.
Guide rail bendingmachine (manual ) see page 82.
• Use of Part. 223 Middle delicate containers (ex: full PET).
• Assembly of Part. 317-223
Part. 211-446
25x8 plate
67063*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
61743*
60 61
Conveyor Components Conveyor Components
R 12,5
16,6
8,5
M8
16,4
22,5 45 45 45 22,5180
13
M8 set screw
6
500
P
Part. 346
Part. 346
16,5
2B
1,5
H
16,5
20,5
1,5
3
620
17,5
152,5
Part. 393
Part. 219
Part. 211
17,5
17
2
Part. 393
Part. 219
Part. 211
Part. 215
17,5
17
Part. 219
Part. 393
Part. 215
500
P
Part. 369
• Assembly of Part. 369
Part. 346
Part. 369Load P (Newton)
Defle
ctio
n (m
m)
200100 3000
1
3
9
7
5
0,24
Part. CodeLengthmetres
36
3466020460214
Weightkg/m
- Material : plastic profile in polyethylene UHMWPE (white ). Metal profile in anodized aluminium.- Min. curvature radius : 110 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres ( in 3 m length). 96 metres ( in 6 m length).- Accessories :
369 69995
Part. Code
- Material : zinc plated steel.- Weight : 0,1 Kg.- Packaging : 8 pieces.
M 8 hex head boltUNI 5739 - 65, DIN 933.
Insert the guides and tighten the set screws.
In aluminium
PRODUCT GUIDES PRODUCT GUIDES
Guide rail (half round)
Connecting bar
Accessories
• Use of Part. 346 Conveyors with limited lateral loads (ex brick).
• Use of Part. 393
• Assembly of Part. 346
• Deflection of Part. 346
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
• Deflection of Part. 393 - 596
Part. 596
596 6AISI 304 0,65
- Use : unstable containers. Beer bottles (0,33 l ), water bottles (1/2 l ). - Plastic profile material : polyethylene UHMWPE (white ).- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 48 metres.- Accessories :
Part. 393Label protection guide
Part.
393
Lengthmetres
3
Metal profile material
AISI 304
Hmm
1517
6252262512
0,50
Weightkg/mCode
Part.Lengthmetres
Metal profile material
Weightkg/mCode
Hmm
15
Bmm
3,917 3,6
Transport of glass bottles.
Transport of fruit juices bottles.
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres.- Accessories :
Label protection guide
Transport of PET bottles with petaloid bottom. The guide can be used to stabilize, and protect label from damage.
Guide rail bendingmachine (manual ) see page 82.
Guide railclamps see page 84.
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Guide rail bendingmachine (manual ) see page 82.
611092*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
60 61
Conveyor Components Conveyor Components
R 12,5
16,6
8,5
M8
16,4
22,5 45 45 45 22,5180
13
M8 set screw
6
500
P
Part. 346
Part. 346
16,5
2B
1,5
H
16,5
20,5
1,5
3
620
17,5
152,5
Part. 393
Part. 219
Part. 211
17,5
17
2
Part. 393
Part. 219
Part. 211
Part. 215
17,5
17
Part. 219
Part. 393
Part. 215
500
P
Part. 369
• Assembly of Part. 369
Part. 346
Part. 369Load P (Newton)
Defle
ctio
n (m
m)
200100 3000
1
3
9
7
5
0,24
Part. CodeLengthmetres
36
3466020460214
Weightkg/m
- Material : plastic profile in polyethylene UHMWPE (white ). Metal profile in anodized aluminium.- Min. curvature radius : 110 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres ( in 3 m length). 96 metres ( in 6 m length).- Accessories :
369 69995
Part. Code
- Material : zinc plated steel.- Weight : 0,1 Kg.- Packaging : 8 pieces.
M 8 hex head boltUNI 5739 - 65, DIN 933.
Insert the guides and tighten the set screws.
In aluminium
PRODUCT GUIDES PRODUCT GUIDES
Guide rail (half round)
Connecting bar
Accessories
• Use of Part. 346 Conveyors with limited lateral loads (ex brick).
• Use of Part. 393
• Assembly of Part. 346
• Deflection of Part. 346
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
• Deflection of Part. 393 - 596
Part. 596
596 6AISI 304 0,65
- Use : unstable containers. Beer bottles (0,33 l ), water bottles (1/2 l ). - Plastic profile material : polyethylene UHMWPE (white ).- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 48 metres.- Accessories :
Part. 393Label protection guide
Part.
393
Lengthmetres
3
Metal profile material
AISI 304
Hmm
1517
6252262512
0,50
Weightkg/mCode
Part.Lengthmetres
Metal profile material
Weightkg/mCode
Hmm
15
Bmm
3,917 3,6
Transport of glass bottles.
Transport of fruit juices bottles.
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) available upon request with minimum quantities.- Min. curvature radius : 145 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres.- Accessories :
Label protection guide
Transport of PET bottles with petaloid bottom. The guide can be used to stabilize, and protect label from damage.
Guide rail bendingmachine (manual ) see page 82.
Guide railclamps see page 84.
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Guide rail bendingmachine (manual ) see page 82.
611092*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
62 63
Conveyor Components Conveyor Components
17 31,7
8
21,3
S
500
P
Part. 605-598
Part. 273
Part. 308
3 9 3
41 4730
A
3,2
9S
H R1,5
R1,5
500
P
Part. 273Guide rail (extra flat)
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Part.
273
Lengthmetres
36
Metal profile material
AISI 304
ThicknessS
mm
2 0,76
Weightkg/mCode
- Plastic profile material: polyethylene UHMWPE (white ).- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 36 metres ( in 6 m length).- Accessories :
6679167602
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
• Deflection of Part. 273
PRODUCT GUIDES PRODUCT GUIDES
• Use of Part. 273 Rugged containers with delicate surface ( for example decorated glass bottles ). Can be used in combination with Part. 605 - 598.
• Use of Part. 308 Overhead trasport of PET bottles.
Part. 539
Part. Colour CodeLengthmetres
Black
Green
36
539
689301689321
Weightkg/m
- Material : polyethylene PE 500.000.- Linear expansion coefficient : 2,5 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres ( in 3 m length). 96 metres ( in 6 m length).- Accessories :
0,2336
689291689311
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 539
- Fixing with metal profile Part. 537.
- Fixing with plate.
Assembly / disassembly with plates.
Part. 537 - Metal profile 40x8 see page 81.
Guide rail (extra flat)
• Deflection of Part. 308
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
Part. 308
Part.
308
Lengthmetres
36
ThicknessS
mm
1,56560268192
2 677130,65
Weightkg/mCode
3
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) or antiabrasive (green) available upon request with minimum quantities.- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
Smm
1,5
Hmm
22,5
Amm
16,52 23 17
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Neck transport guide
Metal profile material
AISI 304
62 63
Conveyor Components Conveyor Components
17 31,7
8
21,3
S
500
P
Part. 605-598
Part. 273
Part. 308
3 9 3
41 4730
A
3,2
9S
H R1,5
R1,5
500
P
Part. 273Guide rail (extra flat)
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Part.
273
Lengthmetres
36
Metal profile material
AISI 304
ThicknessS
mm
2 0,76
Weightkg/mCode
- Plastic profile material: polyethylene UHMWPE (white ).- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 36 metres ( in 6 m length).- Accessories :
6679167602
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
• Deflection of Part. 273
PRODUCT GUIDES PRODUCT GUIDES
• Use of Part. 273 Rugged containers with delicate surface ( for example decorated glass bottles ). Can be used in combination with Part. 605 - 598.
• Use of Part. 308 Overhead trasport of PET bottles.
Part. 539
Part. Colour CodeLengthmetres
Black
Green
36
539
689301689321
Weightkg/m
- Material : polyethylene PE 500.000.- Linear expansion coefficient : 2,5 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres ( in 3 m length). 96 metres ( in 6 m length).- Accessories :
0,2336
689291689311
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 539
- Fixing with metal profile Part. 537.
- Fixing with plate.
Assembly / disassembly with plates.
Part. 537 - Metal profile 40x8 see page 81.
Guide rail (extra flat)
• Deflection of Part. 308
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500100
1
3
12
10
5
Guides with
S= 1,5
Guides with S= 2
Part. 308
Part.
308
Lengthmetres
36
ThicknessS
mm
1,56560268192
2 677130,65
Weightkg/mCode
3
- Plastic profile material : polyethylene UHMWPE (white ). Antistatic polyethylene UHMWPE (black) or antiabrasive (green) available upon request with minimum quantities.- Min. curvature radius : 160 mm.- Linear expansion coefficient : 4 x 10 -5 . Calculation of thermal expansion see page 141.- Packaging : 24 metres ( in 3 m length). 48 metres ( in 6 m length).- Accessories :
Smm
1,5
Hmm
22,5
Amm
16,52 23 17
Guide railclamps see page 84.
Guide rail bendingmachine (manual ) see page 82.
Neck transport guide
Metal profile material
AISI 304
64 65
Conveyor Components Conveyor Components
99,7*
99,731
498,5
S
*= module length
M8
PATENT PENDING
ø 18
Travel
Guide position (Part. 605) to allow assembly withdivider module.
Part. 605
33
42,5
H11
,5
40
10
8,2
16,4
13,5
11,54,523
500
P
Part.
605
Version
For 30x 6 plateFor 40x 8 plate
68
613602613612
0,96
Weightkg/m
Smm
3040
Hmm Code
- Use : glass containers without side load. Can be used both straight run and sideflexing.- Can be used in combination with Part. 273 - 356 - 422 - 539.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 605
- Fixing with metal profile Part. 537.
- Fixing with plate.
30 x 640 x 8
Part. 537 (40 x 8)see page 81
Part. 606Divider module
Part. 537 - Metal profile 40x8 see page 81.
Divider module Part. 606
Part.
606
Version
For 30x 6 plateFor 40x 8 plate
613642613652
0,13
WeightkgCode
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
• Fixing of Part. 605Assembly / disassembly
• Modular systemThe guide consists of modules with snap-on assembly.
• Assembly of Part. 606
PRODUCT GUIDES PRODUCT GUIDES
Part. 422
Part. 370
Part. Colour CodeLengthmetres
Green 36
422 65248M65258M
Weightkg/m
- Use : rugged containers.- Material : plastic profile in polyethylene UHMWPE (green). Metal profile in anodized aluminium.- State of supply : the plastic and metal profiles are supplied assembled.- Min. curvature radius : 280 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres.- Accessories :
0,7
Guide rail bendingmachine (manual ) see page 82.
Load P (Newton)
Defle
ctio
n (m
m)
600400 800 1000200
1
2
3
5
4
• Fixing of Part. 422
M8 hex nut
M8 hex head bolt
In aluminium
Guide rail (extra flat)
• Deflection of Part. 422
Centre guide (extra flat)
Accessories
Sideflexing
Accessories
Sealing profile
- Use : improves guide cleanliness.- Material : rubber EPDM 80 (black).- State of supply : coils.- Packaging : 20 metres.
370
Part. Code
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
61036*
64 65
Conveyor Components Conveyor Components
99,7*
99,731
498,5
S
*= module length
M8
PATENT PENDING
ø 18
Travel
Guide position (Part. 605) to allow assembly withdivider module.
Part. 605
33
42,5
H11
,5
40
10
8,2
16,4
13,5
11,54,523
500
P
Part.
605
Version
For 30x 6 plateFor 40x 8 plate
68
613602613612
0,96
Weightkg/m
Smm
3040
Hmm Code
- Use : glass containers without side load. Can be used both straight run and sideflexing.- Can be used in combination with Part. 273 - 356 - 422 - 539.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 605
- Fixing with metal profile Part. 537.
- Fixing with plate.
30 x 640 x 8
Part. 537 (40 x 8)see page 81
Part. 606Divider module
Part. 537 - Metal profile 40x8 see page 81.
Divider module Part. 606
Part.
606
Version
For 30x 6 plateFor 40x 8 plate
613642613652
0,13
WeightkgCode
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
• Fixing of Part. 605Assembly / disassembly
• Modular systemThe guide consists of modules with snap-on assembly.
• Assembly of Part. 606
PRODUCT GUIDES PRODUCT GUIDES
Part. 422
Part. 370
Part. Colour CodeLengthmetres
Green 36
422 65248M65258M
Weightkg/m
- Use : rugged containers.- Material : plastic profile in polyethylene UHMWPE (green). Metal profile in anodized aluminium.- State of supply : the plastic and metal profiles are supplied assembled.- Min. curvature radius : 280 mm.- Linear expansion coefficient : 2 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 48 metres.- Accessories :
0,7
Guide rail bendingmachine (manual ) see page 82.
Load P (Newton)
Defle
ctio
n (m
m)
600400 800 1000200
1
2
3
5
4
• Fixing of Part. 422
M8 hex nut
M8 hex head bolt
In aluminium
Guide rail (extra flat)
• Deflection of Part. 422
Centre guide (extra flat)
Accessories
Sideflexing
Accessories
Sealing profile
- Use : improves guide cleanliness.- Material : rubber EPDM 80 (black).- State of supply : coils.- Packaging : 20 metres.
370 61036
Part. Code
66 67
Conveyor Components Conveyor Components
20
99,7*
74H
11,5
33498,5
S
M8
ø 18
Part.620
7410
H11
,5
33
S
M8
ø 18
Travel Part. 605
99,731
Travel Part. 598
99,731
99,7*498,5
10
1,5
Guide position (Part. 605) to allow assembly withdivider module.
Guide position (Part. 598) to allow assembly withdivider module.
Part. 598
Part. 620
Part. 605
Part.
605
Version
For 30x 6 plateFor 40x 8 plate
68
613622613632
1,38
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
30 x 640 x 8
Part. 606Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part.
598
Version
For 30x 6 plateFor 40x 8 plate
68
613702613092
1,8
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDINGReinforced / Straight run
Sideflexing
- Similar to Part. 605 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
- To be used with Part. 598, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
Part. 537 (40 x 8)see page 81
Part. 620
Part. 620
30 x 640 x 8
Part. 610Divider module
• Fixing of Part. 598Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 610
Part. 606
Part.
606
Version
For 30x 6 plateFor 40x 8 plate
613662613672
0,19
WeightkgCode
Part. 598
• Modular systemThe guide consists of modules with snap-on assembly.
Part.
610
Version
For 30x 6 plateFor 40x 8 plate
613762613772
0,2
WeightkgCode
Part. 537 - Metal profile 40x8 see page 81.
PRODUCT GUIDES PRODUCT GUIDES
Centre guide (extra flat) Centre guide (extra flat reinforced)
Divider module
Accessories
Metal "C" profile
• Assembly of Part. 610
- Use : glass containers without side load. Can be used both straight run and sideflexing.- Can be used in combination with Part. 273 - 356 - 422 - 539.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
- Fixing with metal profile Part. 537.
- Fixing with plate.
Divider module
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Accessories
• Fixing of Part. 605Assembly / disassembly
Part. 537 (40 x 8)see page 81
• Modular systemThe guide consists of modules with snap-on assembly.
• Assembly of Part. 606
66 67
Conveyor Components Conveyor Components
20
99,7*
74H
11,5
33498,5
S
M8
ø 18
Part.620
7410
H11
,5
33
S
M8
ø 18
Travel Part. 605
99,731
Travel Part. 598
99,731
99,7*498,5
10
1,5
Guide position (Part. 605) to allow assembly withdivider module.
Guide position (Part. 598) to allow assembly withdivider module.
Part. 598
Part. 620
Part. 605
Part.
605
Version
For 30x 6 plateFor 40x 8 plate
68
613622613632
1,38
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
30 x 640 x 8
Part. 606Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part.
598
Version
For 30x 6 plateFor 40x 8 plate
68
613702613092
1,8
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDINGReinforced / Straight run
Sideflexing
- Similar to Part. 605 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
- To be used with Part. 598, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
Part. 537 (40 x 8)see page 81
Part. 620
Part. 620
30 x 640 x 8
Part. 610Divider module
• Fixing of Part. 598Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 610
Part. 606
Part.
606
Version
For 30x 6 plateFor 40x 8 plate
613662613672
0,19
WeightkgCode
Part. 598
• Modular systemThe guide consists of modules with snap-on assembly.
Part.
610
Version
For 30x 6 plateFor 40x 8 plate
613762613772
0,2
WeightkgCode
Part. 537 - Metal profile 40x8 see page 81.
PRODUCT GUIDES PRODUCT GUIDES
Centre guide (extra flat) Centre guide (extra flat reinforced)
Divider module
Accessories
Metal "C" profile
• Assembly of Part. 610
- Use : glass containers without side load. Can be used both straight run and sideflexing.- Can be used in combination with Part. 273 - 356 - 422 - 539.- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 9 strands).- Accessories :
- Fixing with metal profile Part. 537.
- Fixing with plate.
Divider module
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
- Material : frame in acetal POM (black). Low friction plates in acetal POM (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Accessories
• Fixing of Part. 605Assembly / disassembly
Part. 537 (40 x 8)see page 81
• Modular systemThe guide consists of modules with snap-on assembly.
• Assembly of Part. 606
68 69
Conveyor Components Conveyor Components
71
6
16,5
50 67
+ 0
,578
0
7987 64
- 0,50
48
5
15,5
15113110 10
565
,5
CB
1,5
A
57,55
60 X 6
2 mm/metre
C
A B
500
P
Part. 191-296
Part. 191-296
• Deflection of Part. 191 - 296
Part. 191-296
Load P (Newton)
Defle
ctio
n (m
m)
500400 600 700300
1
2
5
4
3
Part.
191
Lengthmetres
36
Colour
Black5713156811
0,60
Weightkg/mCode
29636
Black68811618291
0,60
Part. 191
Part. 296
• The guide rails must be used with a 60 x 6 plate 60 x 6
Part. 191 Part. 296Part. 378-379
378 63646
Part. Code
- Material : clamp and fixing screws in stainless steel AISI 304. - Packaging : 50 pieces complete with fixing screws.
Applicable to Part. 191
379 63656Applicable to Part. 296
Use
81,5
90
Amm
9
8
Bmm
18
17
Cmm
Guide rail clampsPart. 191 (see page 94).Part. 296 (see page 95).
Bendingmachine see page 82.
- Material : polyethylene PE 500.000.- Min. curvature radius : 200 mm.- Linear expansion coefficient : 2,5 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 30 metres ( in 3 m length). 60 metres ( in 6 m length).- Accessories :
PRODUCT GUIDES PRODUCT GUIDES
Accessories
Accessories
Guide rail (extra-large)
End plugPart. 376-377
376 63626
Part.
Applicable to Part. 191
377 63636Applicable to Part. 296
Use Code
- Material : reinforced polypropylene PP FV (black). - Packaging : 50 pieces.
• Assembly of Part. 376-377 Press-fit. Seal with silicon.
• Assembly of Part. 378-379 Assembly with self-tapping screws 4,8 x 9,5 DIN 7970
• Leave a gap between the plug and the plate to allow for contraction at low temperatures.
77
86
Amm
65,3
63,8
Bmm
15,5
14,5
Cmm
Joint clamp• Use of Part. 191-296
68 69
Conveyor Components Conveyor Components
71
6
16,5
50 67
+ 0
,578
0
7987 64
- 0,50
48
5
15,5
15113110 10
565
,5
CB
1,5
A
57,55
60 X 6
2 mm/metre
C
A B
500
P
Part. 191-296
Part. 191-296
• Deflection of Part. 191 - 296
Part. 191-296
Load P (Newton)
Defle
ctio
n (m
m)
500400 600 700300
1
2
5
4
3
Part.
191
Lengthmetres
36
Colour
Black5713156811
0,60
Weightkg/mCode
29636
Black68811618291
0,60
Part. 191
Part. 296
• The guide rails must be used with a 60 x 6 plate 60 x 6
Part. 191 Part. 296Part. 378-379
378 63646
Part. Code
- Material : clamp and fixing screws in stainless steel AISI 304. - Packaging : 50 pieces complete with fixing screws.
Applicable to Part. 191
379 63656Applicable to Part. 296
Use
81,5
90
Amm
9
8
Bmm
18
17
Cmm
Guide rail clampsPart. 191 (see page 94).Part. 296 (see page 95).
Bendingmachine see page 82.
- Material : polyethylene PE 500.000.- Min. curvature radius : 200 mm.- Linear expansion coefficient : 2,5 x 10 -4 . Calculation of thermal expansion see page 141.- Packaging : 30 metres ( in 3 m length). 60 metres ( in 6 m length).- Accessories :
PRODUCT GUIDES PRODUCT GUIDES
Accessories
Accessories
Guide rail (extra-large)
End plugPart. 376-377
376 63626
Part.
Applicable to Part. 191
377 63636Applicable to Part. 296
Use Code
- Material : reinforced polypropylene PP FV (black). - Packaging : 50 pieces.
• Assembly of Part. 376-377 Press-fit. Seal with silicon.
• Assembly of Part. 378-379 Assembly with self-tapping screws 4,8 x 9,5 DIN 7970
• Leave a gap between the plug and the plate to allow for contraction at low temperatures.
77
86
Amm
65,3
63,8
Bmm
15,5
14,5
Cmm
Joint clamp• Use of Part. 191-296
70 71
Conveyor Components Conveyor Components
74,3*371,5
46 40 32,5
32 2
17S
12
ø11,5
14
ø11,5
121599,7*
231
32,5
42,5
H11
,5
99,731
498,5
S
*= module length
*= module length
PATENT PENDING
M8
PATENT PENDING
ø 18
Travel Part. 585
Guide position (Part. 585) to allow assembly withdivider module.
Part. 581
Part.
581
Version
For 40x8 plate 8 603322 0,62
Weightkg/m
Smm Code
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
585
Version
For 30x6 plateFor 40x8 plate
68
603492 N603502 N
1,24
Weightkg/m
Smm
3040
Hmm Code
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 585
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 581
- Fixing with metal profile Part. 537.
- Fixing with metal profile Part. 537.
- Fixing with plate.
• Min. curvature radius Part. 581
30 x 640 x 8
- Fixing with plate.
Part. 537 (40 x 8)see page 81
Part. 586Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part. 586
Part.
586
Version
For 30x6 plateFor 40x8 plate
603552 N603562 N
0,15
WeightkgCode
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Snap-on assembly / disassembly
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. Part. 585Assembly / disassembly
• Modular system Part. 581-585The guide consists of modules with snap-on assembly.
PRODUCT GUIDES PRODUCT GUIDES
Roller side guide
Centre roller guide
Sideflexing
Accessories
Sideflexing
Divider module• Assembly of Part. 586• Use of Part. 581-585
For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board).
Part. 537 - Metal profile 40x8 see page 81.
70 71
Conveyor Components Conveyor Components
74,3*371,5
46 40 32,5
32 2
17S
12
ø11,5
14
ø11,5
121599,7*
231
32,5
42,5
H11
,5
99,731
498,5
S
*= module length
*= module length
PATENT PENDING
M8
PATENT PENDING
ø 18
Travel Part. 585
Guide position (Part. 585) to allow assembly withdivider module.
Part. 581
Part.
581
Version
For 40x8 plate 8 603322 0,62
Weightkg/m
Smm Code
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
585
Version
For 30x6 plateFor 40x8 plate
68
603492 N603502 N
1,24
Weightkg/m
Smm
3040
Hmm Code
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 585
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 581
- Fixing with metal profile Part. 537.
- Fixing with metal profile Part. 537.
- Fixing with plate.
• Min. curvature radius Part. 581
30 x 640 x 8
- Fixing with plate.
Part. 537 (40 x 8)see page 81
Part. 586Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part. 586
Part.
586
Version
For 30x6 plateFor 40x8 plate
603552 N603562 N
0,15
WeightkgCode
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Snap-on assembly / disassembly
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. Part. 585Assembly / disassembly
• Modular system Part. 581-585The guide consists of modules with snap-on assembly.
PRODUCT GUIDES PRODUCT GUIDES
Roller side guide
Centre roller guide
Sideflexing
Accessories
Sideflexing
Divider module• Assembly of Part. 586• Use of Part. 581-585
For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board).
Part. 537 - Metal profile 40x8 see page 81.
72 73
Conveyor Components Conveyor Components
121599,7*
ø11,5
6574H
11,5
231
498,5
S
M8
ø 18
74,3*
6574
28,51214
ø11,5 178
371,5
2
40
PATENT PENDING 12 Part.6201599,7*
ø11,5
657410
H11
,5
2
31498,5
S
M8
ø 18
99,731
20
1,5
10
Travel Part. 585-597
Guide position (Part. 585-597) to allow assembly with divider module.
*= module length
*= module length
Part. 597
Part. 585
Part.
585
Version
For 30x6 plateFor 40x8 plate
68
603512603522
2,0
Weightkg/m
Smm
3040
Hmm Code
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
30 x 640 x 8
Part. 586-Divider modulesee page 73.
Part. 581
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
581
Version
For 40x8 plate 603312 1,01
Weightkg/mCode
Part. 537 - Metal profile 40x8 see page 81.
40 x 8
Part.
597
Version
For 30x 6 plateFor 40x 8 plate
68
613712613082
2,5
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
• Fixing of Part. 597
- Fixing with plate.
- Fixing with metal profile Part. 537.
Part. 620
Part. 620
30 x 640 x 8
Part. 609Divider module
Rmin = 350
Rmin = 500
Part. 586-609
Part.
586
VersionUse
Applicableto Part. 585
Applicableto Part. 597
For 30x6 plateFor 40x8 plate
603572603582
0,24
WeightkgCode
609For 30x6 plateFor 40x8 plate
613742613752
0,26
• Use of Part. 597 For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board). Similar to Part. 585 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.
Centre roller guide (reinforced)
Part. 620
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
- To be used with Part. 597, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
Part. 597
• Assembly of Part. 586-609
Roller side guide
PRODUCT GUIDES
Sideflexing
• Fixing of Part. 581
- Fixing with metal profile Part. 537.
- Fixing with plate.
Snap-on assembly / disassembly
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Min. curvature radius Part. 581
External curve
Internal curve
• Fixing of Part. 585Assembly / disassembly
Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 537 (40 x 8)see page 81
• Modular system Part. 581-585The guide consists of modules with snap-on assembly.
Part. 537 - Metal profile 40x8 see page 81.
Centre roller guide
Sideflexing
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Divider module
Accessories
PRODUCT GUIDES
Metal "C" profile
• Modular systemThe guide consists of modules with snap-on assembly.
Reinforced / Straight run
Part. 537 - Metal profile 40x8 see page 81.
Part. 537 (40 x 8)see page 81
• Use of Part. 581-585 For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board).
72 73
Conveyor Components Conveyor Components
121599,7*
ø11,5
6574H
11,5
231
498,5
S
M8
ø 18
74,3*
6574
28,51214
ø11,5 178
371,5
2
40
PATENT PENDING 12 Part.6201599,7*
ø11,5
657410
H11
,5
2
31498,5
S
M8
ø 18
99,731
20
1,5
10
Travel Part. 585-597
Guide position (Part. 585-597) to allow assembly with divider module.
*= module length
*= module length
Part. 597
Part. 585
Part.
585
Version
For 30x6 plateFor 40x8 plate
68
603512603522
2,0
Weightkg/m
Smm
3040
Hmm Code
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
30 x 640 x 8
Part. 586-Divider modulesee page 73.
Part. 581
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
581
Version
For 40x8 plate 603312 1,01
Weightkg/mCode
Part. 537 - Metal profile 40x8 see page 81.
40 x 8
Part.
597
Version
For 30x 6 plateFor 40x 8 plate
68
613712613082
2,5
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
• Fixing of Part. 597
- Fixing with plate.
- Fixing with metal profile Part. 537.
Part. 620
Part. 620
30 x 640 x 8
Part. 609Divider module
Rmin = 350
Rmin = 500
Part. 586-609
Part.
586
VersionUse
Applicableto Part. 585
Applicableto Part. 597
For 30x6 plateFor 40x8 plate
603572603582
0,24
WeightkgCode
609For 30x6 plateFor 40x8 plate
613742613752
0,26
• Use of Part. 597 For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board). Similar to Part. 585 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.
Centre roller guide (reinforced)
Part. 620
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
- To be used with Part. 597, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
Part. 597
• Assembly of Part. 586-609
Roller side guide
PRODUCT GUIDES
Sideflexing
• Fixing of Part. 581
- Fixing with metal profile Part. 537.
- Fixing with plate.
Snap-on assembly / disassembly
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Min. curvature radius Part. 581
External curve
Internal curve
• Fixing of Part. 585Assembly / disassembly
Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 537 (40 x 8)see page 81
• Modular system Part. 581-585The guide consists of modules with snap-on assembly.
Part. 537 - Metal profile 40x8 see page 81.
Centre roller guide
Sideflexing
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Divider module
Accessories
PRODUCT GUIDES
Metal "C" profile
• Modular systemThe guide consists of modules with snap-on assembly.
Reinforced / Straight run
Part. 537 - Metal profile 40x8 see page 81.
Part. 537 (40 x 8)see page 81
• Use of Part. 581-585 For thin walled and delicate containers ( like aluminium cans, PET bottles, decorated card-board).
74 75
Conveyor Components Conveyor Components
74,3*371,5
46 40 32
32 3
18S
12
ø13,6
14
ø13,6
121599,7*
333
3242,5
H11
,5
99,731
498,5
S
*= module length
*= module length
PATENT PENDING
M8
PATENT PENDING
ø 18
Part. 557
Guide position (Part. 557) to allow assembly withdivider module.
Travel
Sideflexing
Sideflexing
Part. 580
Part.
580
Version
For 40x8 plateFor 40x10 plate
810
603302611772
0,61
Weightkg/m
Smm Code
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
557
Version
For 30x6 plateFor 40x8 plate
68
695501 N695991 N
1,22
Weightkg/m
Smm
3040
Hmm Code
- Can be used in combination with Part. 580.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 557
40 x 840 x 10
• Fixing of Part. 580
• Min. curvature radius Part. 580
30 x 640 x 8
Part. 570Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part. 537 - Metal profile 40x8 see page 81.
Divider module Part. 570
Part.
570
Version
For 30x6 plateFor 40x8 plate
601142 N601162 N
0,15
WeightkgCode
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Snap-on assembly / disassembly
• Modular system Part. 580-557The guide consists of modules with snap-on assembly.
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. 557Assembly / disassembly
Centre roller guide
• Assembly of Part. 570
Part. 587
Part. 557Part. 580
Part. 617
Part. 592
Part. 199
40 mm
40 mm ø 20 mm
• Use of Part. 580-557 For medium strength containers ( tin cans, glass strong aluminium cans).
- Fixing with metal profile Part. 537.
- Fixing with plate.
Roller side guide
PRODUCT GUIDES
Part. 537 (40 x 8)see page 81
Part. 535see page 81
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 537 (40 x 8)see page 81
PRODUCT GUIDES
Accessories
74 75
Conveyor Components Conveyor Components
74,3*371,5
46 40 32
32 3
18S
12
ø13,6
14
ø13,6
121599,7*
333
3242,5
H11
,5
99,731
498,5
S
*= module length
*= module length
PATENT PENDING
M8
PATENT PENDING
ø 18
Part. 557
Guide position (Part. 557) to allow assembly withdivider module.
Travel
Sideflexing
Sideflexing
Part. 580
Part.
580
Version
For 40x8 plateFor 40x10 plate
810
603302611772
0,61
Weightkg/m
Smm Code
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
557
Version
For 30x6 plateFor 40x8 plate
68
695501 N695991 N
1,22
Weightkg/m
Smm
3040
Hmm Code
- Can be used in combination with Part. 580.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 557
40 x 840 x 10
• Fixing of Part. 580
• Min. curvature radius Part. 580
30 x 640 x 8
Part. 570Divider module
Part. 537 - Metal profile 40x8 see page 81.
Part. 537 - Metal profile 40x8 see page 81.
Divider module Part. 570
Part.
570
Version
For 30x6 plateFor 40x8 plate
601142 N601162 N
0,15
WeightkgCode
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Snap-on assembly / disassembly
• Modular system Part. 580-557The guide consists of modules with snap-on assembly.
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. 557Assembly / disassembly
Centre roller guide
• Assembly of Part. 570
Part. 587
Part. 557Part. 580
Part. 617
Part. 592
Part. 199
40 mm
40 mm ø 20 mm
• Use of Part. 580-557 For medium strength containers ( tin cans, glass strong aluminium cans).
- Fixing with metal profile Part. 537.
- Fixing with plate.
Roller side guide
PRODUCT GUIDES
Part. 537 (40 x 8)see page 81
Part. 535see page 81
- Fixing with metal profile Part. 537.
- Fixing with plate.
Part. 537 (40 x 8)see page 81
PRODUCT GUIDES
Accessories
76 77
Conveyor Components Conveyor Components
20
1,5
10
121599,7*
ø13,6
6474H
11,5
333
498,5
S
M8
ø 18
74,3*
6474
28,51214
ø13,6 188
371,5
3
40
PATENT PENDING
*= module length
12 Part.6201599,7*
ø13,6
647410
H11
,5
3
33498,5
S
M8
ø 18
Travel
99,731
Part. 557-607
Guide position (Part.557- 607) to allow assembly with divider module.
Part. 607
Part. 620Part. 557
Part.
557
Version
Per piatto 30x6Per piatto 40x8
68
603472603482
1,96
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 537 (40 x 8)see page 81
30 x 640 x 8
Part. 570-Divider modulesee page 77.
Part. 537 - Metal profile 40x8 see page 81.
Part. 580
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
580
Version
For 40x8 plate 603292 0,99
Weightkg/mCode
Part. 537 - Metal profile 40x8 see page 81.
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 580
• Use of Part. 580-557 For medium strength containers ( tin cans, glass, strong aluminium cans).
Snap-on assembly / disassembly
Centre roller guide (reinforced)
Part.
607
Version
For 30x 6 plateFor 40x 8 plate
68
613682613692
2,4
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 580.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
• Fixing of Part. 607
- Fixing with plate.
- Fixing with metal profile Part. 537. Part. 537 (40 x 8)
see page 81
Part. 620
Part. 620
30 x 640 x 8
Part. 608Divider module
Part. 537 - Metal profile 40x8 see page 81.
- Fixing with plate.
- Fixing with metal profile Part. 537.
• Min. curvature radius Part. 580
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. 557Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
• Modular system Part. 580-557The guide consists of modules with snap-on assembly.
• Modular system Part. 607The guide consists of modules with snap-on assembly.
Part. 570-608
Part.
570
VersionUse
Applicableto Part. 557
Applicableto Part. 607
For 30x6 plateFor 40x8 plate
603532603542
0,24
WeightkgCode
608For 30x6 plateFor 40x8 plate
613722613732
0,26
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Part. 607
Assembly / disassembly
• Use of Part. 607 For medium strength containers ( tin cans, glass, strong aluminium cans). Similar to Part. 557 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.
Sideflexing
Sideflexing
Roller side guide
Centre roller guide
Divider module
Metal "C" profile
• Assembly of Part. 570-608
PRODUCT GUIDES
Reinforced / Straight run
PRODUCT GUIDES
Accessories
- To be used with Part. 607, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
76 77
Conveyor Components Conveyor Components
20
1,5
10
121599,7*
ø13,6
6474H
11,5
333
498,5
S
M8
ø 18
74,3*
6474
28,51214
ø13,6 188
371,5
3
40
PATENT PENDING
*= module length
12 Part.6201599,7*
ø13,6
647410
H11
,5
3
33498,5
S
M8
ø 18
Travel
99,731
Part. 557-607
Guide position (Part.557- 607) to allow assembly with divider module.
Part. 607
Part. 620Part. 557
Part.
557
Version
Per piatto 30x6Per piatto 40x8
68
603472603482
1,96
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 581.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Min. curvature radius : 335 mm.- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part. 537 (40 x 8)see page 81
30 x 640 x 8
Part. 570-Divider modulesee page 77.
Part. 537 - Metal profile 40x8 see page 81.
Part. 580
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,371 metres (N° 5 modules ). - Packaging : 4,5 metres (N° 12 strands).- Accessories :
Part.
580
Version
For 40x8 plate 603292 0,99
Weightkg/mCode
Part. 537 - Metal profile 40x8 see page 81.
40 x 8
Part. 537 (40 x 8)see page 81
Part. 535see page 81
• Fixing of Part. 580
• Use of Part. 580-557 For medium strength containers ( tin cans, glass, strong aluminium cans).
Snap-on assembly / disassembly
Centre roller guide (reinforced)
Part.
607
Version
For 30x 6 plateFor 40x 8 plate
68
613682613692
2,4
Weightkg/m
Smm
3040
Hmm Code
*= module length
PATENT PENDING
- Can be used in combination with Part. 580.- Material : frame in acetal POM (black). Rollers in polyamide PA (white ).- Standard packaging : strands of 0,498 metres (N° 5 modules ).- Packaging : 4,5 metres (N° 9 strands).- Accessories :
Part.
620
Material
Zinc plated steelStainless steel AISI 304
6561863226
0,4
Weightkg/mCode
• Fixing of Part. 607
- Fixing with plate.
- Fixing with metal profile Part. 537. Part. 537 (40 x 8)
see page 81
Part. 620
Part. 620
30 x 640 x 8
Part. 608Divider module
Part. 537 - Metal profile 40x8 see page 81.
- Fixing with plate.
- Fixing with metal profile Part. 537.
• Min. curvature radius Part. 580
External curve
Internal curve
Rmin = 350
Rmin = 500
• Fixing of Part. 557Assembly / disassembly
- Fixing with metal profile Part. 537.
- Fixing with plate.
• Modular system Part. 580-557The guide consists of modules with snap-on assembly.
• Modular system Part. 607The guide consists of modules with snap-on assembly.
Part. 570-608
Part.
570
VersionUse
Applicableto Part. 557
Applicableto Part. 607
For 30x6 plateFor 40x8 plate
603532603542
0,24
WeightkgCode
608For 30x6 plateFor 40x8 plate
613722613732
0,26
- Material : frame in acetal POM (black). Rollers in polyamide PA (white ). Separation block in polyethylene PE (black).- Packaging : 2 pieces.
Part. 607
Assembly / disassembly
• Use of Part. 607 For medium strength containers ( tin cans, glass, strong aluminium cans). Similar to Part. 557 but for the possible addition of a metal profile for added stiffness. The guide and metal "C" profile are supplied separate.
Sideflexing
Sideflexing
Roller side guide
Centre roller guide
Divider module
Metal "C" profile
• Assembly of Part. 570-608
PRODUCT GUIDES
Reinforced / Straight run
PRODUCT GUIDES
Accessories
- To be used with Part. 607, for added stiffness. - Standard packaging : bars of 3 metres. - Packaging : 48 metres.
78 79
Conveyor Components Conveyor Components
PATENT PENDING
ø 21
264
88,487,8 87,8
19 17,4
50
32,68
4420,555 40
ø 6,35
3
500
P
500
P
0,54 257*
17,4ø 21
3129
259,5261**
0,54 257*L
431
20,5
46,5 2
46,5
31
17,4ø 21
3 20,5
4
259,5261**
Roller side guidePart. 628 S
Part.
628 S
Version
For 40x8 plate 1,4
Weightkg/mCode
- Both straight and curved sections.- Material : frame in polyamide PA (black). Rollers in acetal POM (white ). Roller pins in stainless steel AISI 430 F. Fixing pins in stainless steel AISI 303.- Standard packaging : strands of 0,264 metres.- Packaging : 6,336 metres (N° 24 strands).- Accessories :
Part. 128 S
40 x 8
Part. 535see page 81
Knurl
• Fixing of Part. 628 S
- Fixing with metal profile Part. 537.
• Assembly of Part. 628 S
- Fixing with plate.
Knurl
Part. 537 - Metal profile 40x8 see page 81.
Assembly / disassembly
After the pins have beendismounted they should beinserted in the opposite directionto ensure proper fit in the moduleholes.
Part.
128 S
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 304
6413663466
2,06
Weightkg/mCode
- Both straight and curved sections.- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Standard packaging : strands of 3,129 metres.- Packaging : 6,258 metres (n°2 strands).- Accessories :
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
• Deflection of Part. 628 S
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
Load P (Newton)
Plate 40x8
Profile Part. 537
Part. 128 S
Part. 128
• Deflection of Part. 128S-128
Defle
ctio
n (m
m)
Load P (Newton)
• Modular system
• Min. curvature radius Part. 628 S
• Min. curvature radius (only for Part. 128 S)
Internal curve
Rmin = 450
Rmin = 700
External curve
Internal curve
External curve
Guide rail clamps see page 93.
Guide rail clamps see page 93.
= module lenght= pitch of modules
= module lenght= pitch of modules
Guides are made of 257 mm long modules fixed on a metal "C" profile.
Curving procedure- Disassemble the modules - Curve the metal profile using the manual bending machine.- Reassemble the modules ( the flexibility of the side straps make them easily adaptable to the curved profile ).
400300 500 600200
0,5
2
1,5
1
Part. 128
Straight run
SideflexingSideflexing
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
10416453162640
2,6
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
20856454162670
Zinc plated steelStainless steel AISI 303
31296455163350
***
***
For quick bending of metal profile Part. 537, use the manualbending machine. See page 82.
PRODUCT GUIDES PRODUCT GUIDES
Roller side guide
Roller side guide
• Use of Part. 628 S Rugged containers (ex cases, cartons).
• Use of Part. 128 S-128 Rugged containers (ex cases, cartons).
Part. 537 (40 x 8)see page 81
Guide rail bendingmachine (manual ) see page 82.
671981*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
78 79
Conveyor Components Conveyor Components
PATENT PENDING
ø 21
264
88,487,8 87,8
19 17,4
50
32,68
4420,555 40
ø 6,35
3
500
P
500
P
0,54 257*
17,4ø 21
3129
259,5261**
0,54 257*L
431
20,5
46,5 2
46,5
31
17,4ø 21
3 20,5
4
259,5261**
Roller side guidePart. 628 S
Part.
628 S
Version
For 40x8 plate 1,4
Weightkg/mCode
- Both straight and curved sections.- Material : frame in polyamide PA (black). Rollers in acetal POM (white ). Roller pins in stainless steel AISI 430 F. Fixing pins in stainless steel AISI 303.- Standard packaging : strands of 0,264 metres.- Packaging : 6,336 metres (N° 24 strands).- Accessories :
Part. 128 S
40 x 8
Part. 535see page 81
Knurl
• Fixing of Part. 628 S
- Fixing with metal profile Part. 537.
• Assembly of Part. 628 S
- Fixing with plate.
Knurl
Part. 537 - Metal profile 40x8 see page 81.
Assembly / disassembly
After the pins have beendismounted they should beinserted in the opposite directionto ensure proper fit in the moduleholes.
Part.
128 S
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 304
6413663466
2,06
Weightkg/mCode
- Both straight and curved sections.- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Standard packaging : strands of 3,129 metres.- Packaging : 6,258 metres (n°2 strands).- Accessories :
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
• Deflection of Part. 628 S
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
Load P (Newton)
Plate 40x8
Profile Part. 537
Part. 128 S
Part. 128
• Deflection of Part. 128S-128
Defle
ctio
n (m
m)
Load P (Newton)
• Modular system
• Min. curvature radius Part. 628 S
• Min. curvature radius (only for Part. 128 S)
Internal curve
Rmin = 450
Rmin = 700
External curve
Internal curve
External curve
Guide rail clamps see page 93.
Guide rail clamps see page 93.
= module lenght= pitch of modules
= module lenght= pitch of modules
Guides are made of 257 mm long modules fixed on a metal "C" profile.
Curving procedure- Disassemble the modules - Curve the metal profile using the manual bending machine.- Reassemble the modules ( the flexibility of the side straps make them easily adaptable to the curved profile ).
400300 500 600200
0,5
2
1,5
1
Part. 128
Straight run
SideflexingSideflexing
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
10416453162640
2,6
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
20856454162670
Zinc plated steelStainless steel AISI 303
31296455163350
***
***
For quick bending of metal profile Part. 537, use the manualbending machine. See page 82.
PRODUCT GUIDES PRODUCT GUIDES
Roller side guide
Roller side guide
• Use of Part. 628 S Rugged containers (ex cases, cartons).
• Use of Part. 128 S-128 Rugged containers (ex cases, cartons).
Part. 537 (40 x 8)see page 81
Guide rail bendingmachine (manual ) see page 82.
671981*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
80 81
Conveyor Components Conveyor Components
3
17,4ø 21
L31 4
4772,5
73,599
3
17,4ø 21
L31 4
257*4
4 0,5
0,5
257*
500
P
259,5261**
259,5261** 15M8
100 M8x12ø d
h11
L
14 40
7,5
8
1,5
500
P
Part. 128
Straight run
Part. 128
Straight run
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
10416450162650
3,8
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
20856451162680
Zinc plated steelStainless steel AISI 303
31296452163340
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
6447162660
5,0
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
6448162690
Zinc plated steelStainless steel AISI 303
6449162890
• Deflection of Part. 128
Defle
ctio
n (m
m)
Load P (Newton)
400300 500 600200
0,5
2
1,5
1
• Modular system Part. 128
• Types of guides using our 40x8 metal profile.
Part. 539 Part. 605 - 598
Part. 580 Part. 557 - 607
Part. 581
Part. 628 S
Part. 585 - 597
1041
2085
3129
***
***
Part. 535
Part. 537
Part.
5351214
6846410,12
Weightkg
pin dia.d
mm Code
- Material : stainless steel AISI 303.- State of supply : complete with screw M8 x 12.- Packaging : 24 pieces.
Bolts set
Part. 537Roller side guide
Roller side guide
Metal profile 40x8
Accessories
Part. 128 triple
Part. 128 double
• Use of Part. 128 Rugged containers (ex cases, cartons).
• Deflection of Part. 537
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
Load P (Newton)
PRODUCT GUIDESPRODUCT GUIDES
= module lenght= pitch of modules
= module lenght= pitch of modules
Guide rail bendingmachine (manual ) see page 82.
Part.
537
Material
LengthL
mm Code
3209 689231Stainless steel AISI 304
6425 689241
- Min. curvature radius : 500 mm.- Weight : 0,72 Kg/m.- Packaging : 51,3 metres ( in 3209 mm length), 51,4 metres ( in 6425 mm length).- Accessories :
Guides are made of 257 mm long modules fixed on a metal "C" profile.
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
Guide rail clamps see page 93.
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
Guide rail clamps see page 93.
684651*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
80 81
Conveyor Components Conveyor Components
3
17,4ø 21
L31 4
4772,5
73,599
3
17,4ø 21
L31 4
257*4
4 0,5
0,5
257*
500
P
259,5261**
259,5261** 15M8
100 M8x12ø d
h11
L
14 40
7,5
8
1,5
500
P
Part. 128
Straight run
Part. 128
Straight run
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
10416450162650
3,8
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
20856451162680
Zinc plated steelStainless steel AISI 303
31296452163340
Part.
128
Metal profile, screwsand pins material
Zinc plated steelStainless steel AISI 303
6447162660
5,0
Weightkg/m
LengthL
mm Code
Zinc plated steelStainless steel AISI 303
6448162690
Zinc plated steelStainless steel AISI 303
6449162890
• Deflection of Part. 128
Defle
ctio
n (m
m)
Load P (Newton)
400300 500 600200
0,5
2
1,5
1
• Modular system Part. 128
• Types of guides using our 40x8 metal profile.
Part. 539 Part. 605 - 598
Part. 580 Part. 557 - 607
Part. 581
Part. 628 S
Part. 585 - 597
1041
2085
3129
***
***
Part. 535
Part. 537
Part.
5351214
6846410,12
Weightkg
pin dia.d
mm Code
- Material : stainless steel AISI 303.- State of supply : complete with screw M8 x 12.- Packaging : 24 pieces.
Bolts set
Part. 537Roller side guide
Roller side guide
Metal profile 40x8
Accessories
Part. 128 triple
Part. 128 double
• Use of Part. 128 Rugged containers (ex cases, cartons).
• Deflection of Part. 537
Defle
ctio
n (m
m)
300200 400 500100
2
4
10
8
6
Load P (Newton)
PRODUCT GUIDESPRODUCT GUIDES
= module lenght= pitch of modules
= module lenght= pitch of modules
Guide rail bendingmachine (manual ) see page 82.
Part.
537
Material
LengthL
mm Code
3209 689231Stainless steel AISI 304
6425 689241
- Min. curvature radius : 500 mm.- Weight : 0,72 Kg/m.- Packaging : 51,3 metres ( in 3209 mm length), 51,4 metres ( in 6425 mm length).- Accessories :
Guides are made of 257 mm long modules fixed on a metal "C" profile.
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
Guide rail clamps see page 93.
- Material : rollers in acetal POM (white ). Side straps in polyamide PA (black).- Packaging : n°2 strands.- Accessories :
Guide rail clamps see page 93.
684651*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
82 83
Conveyor Components Conveyor Components
200 400 120
202
255
M
2
2 N
1
X Y Z
1
2 2
L
X
Z12 2
1
2 2
Fig. A
Fig. B
R
R
Z
X
I
I
I
I
I
I
R min = 160 R min = 160
R R
F
F
F
F
F
F
R min = 160 R min = 160
R R
G
Z
Z
Z
G
G
R min = 280 R min = 280
R R
E
E
E
E
E
E
C
C
C
M
N
N
U
V
V
R min = 145 R min = 145
R R
C
C
C
N
M
M
V
U
U
R min = 200 R min = 200
R R
R min = 500
R
R min = 500
R
R min = 500 R min = 800
R R
B
A
A
A
B
B
D
E
E
E
D
D
R
S
S
S
R
R
R
R R
R min = 145 R min = 145
R min = 145 R min = 145
R min = 110 R min = 110
R
R R
R R
Part.
218 23
WeightkgCode
Part.
233
3
3
4
3
3
4
4
- Functioning : manual.- Packaging : 1 bending machine.- Accessories : rollers for bending Part. 233.
-
1-
Internal curve External curve
Part. 218
Part. 233
- Both internal and external bends can be made.
- The rollers are supplied as separate accessories. Each type of guide needs specific rollers, according to the table below. Double groove rollers allow two profile bending at one time.
Calculate the length of the section to be bent L.
2- Sign the length L on the profile to be bent, with (X) starting point, (Z) end point and (Y) middle point.Acting on handle (M), displace roller (1) to contact the profile
3- Acting on handle (M), adjust the displacement toobtain the right radius (more displacement, smaller radius).Acting on handle (N), rollers (2) rotate and move the profile to position X (picture A) or Z (picture B).To obtain the desired radius it is necessary a minimumof two shifts.To get a seamless transition from straight section to curve section and vice-versa it is necessary to exceedpoints X and Z by 20 mm.
L = R • K R = bend radius.K = bend coefficient.
• Bending procedure
The bending machine is made with 3 shafts for rollers,hand driven.Handle (M) displaces roller (1), to ditermine thebending radius.Handle (N) actions the rotation of rollers (2).
Bend angle (degrees)
Bend coefficient K
30° ° ° ° °°
0,5 1
60 90
1,5
120
2
150
2,5
180
3
Part.
233
62791 4
Part. 219
Part. 317
Part. 393
Part. 308
Part. 223
Part. 247
Part. 346
Part. 273Part. 273
Part. 596
Part. 422
Steel rodsdia. 8 to 14* mm
Part. 191
Part. 537
Part. 128 S
Part. 296
Types of guidesto be bent Code
4
4
Inside bentrollers position
Outside bentrollers position
No. ofrollers
CodeNo. ofrollers
Rollers for bending
Accessories
- Material : steel ( the rollers for Part. 346 - 273 - 596 - 356, are supplied in polyamide PA black). - Packaging : 1 series of rollers.- Double race rollers allow two guides to be bent at the same time.- * = Steel rods Ø 14 mm can be bent only one at a time (use the lower groove to give less stress to the machine).
PRODUCT GUIDES PRODUCT GUIDES
Guide rail bending machine (manual)Types of guides
to be bentInternal curveposition of rollers
External curveposition of rollers
60151*
62811*
64374*
69232*
621462*
68179*
62821*
62801*
689371*
64566*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
82 83
Conveyor Components Conveyor Components
200 400 120
202
255
M
2
2 N
1
X Y Z
1
2 2
L
X
Z12 2
1
2 2
Fig. A
Fig. B
R
R
Z
X
I
I
I
I
I
I
R min = 160 R min = 160
R R
F
F
F
F
F
F
R min = 160 R min = 160
R R
G
Z
Z
Z
G
G
R min = 280 R min = 280
R R
E
E
E
E
E
E
C
C
C
M
N
N
U
V
V
R min = 145 R min = 145
R R
C
C
C
N
M
M
V
U
U
R min = 200 R min = 200
R R
R min = 500
R
R min = 500
R
R min = 500 R min = 800
R R
B
A
A
A
B
B
D
E
E
E
D
D
R
S
S
S
R
R
R
R R
R min = 145 R min = 145
R min = 145 R min = 145
R min = 110 R min = 110
R
R R
R R
Part.
218 23
WeightkgCode
Part.
233
3
3
4
3
3
4
4
- Functioning : manual.- Packaging : 1 bending machine.- Accessories : rollers for bending Part. 233.
-
1-
Internal curve External curve
Part. 218
Part. 233
- Both internal and external bends can be made.
- The rollers are supplied as separate accessories. Each type of guide needs specific rollers, according to the table below. Double groove rollers allow two profile bending at one time.
Calculate the length of the section to be bent L.
2- Sign the length L on the profile to be bent, with (X) starting point, (Z) end point and (Y) middle point.Acting on handle (M), displace roller (1) to contact the profile
3- Acting on handle (M), adjust the displacement toobtain the right radius (more displacement, smaller radius).Acting on handle (N), rollers (2) rotate and move the profile to position X (picture A) or Z (picture B).To obtain the desired radius it is necessary a minimumof two shifts.To get a seamless transition from straight section to curve section and vice-versa it is necessary to exceedpoints X and Z by 20 mm.
L = R • K R = bend radius.K = bend coefficient.
• Bending procedure
The bending machine is made with 3 shafts for rollers,hand driven.Handle (M) displaces roller (1), to ditermine thebending radius.Handle (N) actions the rotation of rollers (2).
Bend angle (degrees)
Bend coefficient K
30° ° ° ° °°
0,5 1
60 90
1,5
120
2
150
2,5
180
3
Part.
233
62791 4
Part. 219
Part. 317
Part. 393
Part. 308
Part. 223
Part. 247
Part. 346
Part. 273Part. 273
Part. 596
Part. 422
Steel rodsdia. 8 to 14* mm
Part. 191
Part. 537
Part. 128 S
Part. 296
Types of guidesto be bent Code
4
4
Inside bentrollers position
Outside bentrollers position
No. ofrollers
CodeNo. ofrollers
Rollers for bending
Accessories
- Material : steel ( the rollers for Part. 346 - 273 - 596 - 356, are supplied in polyamide PA black). - Packaging : 1 series of rollers.- Double race rollers allow two guides to be bent at the same time.- * = Steel rods Ø 14 mm can be bent only one at a time (use the lower groove to give less stress to the machine).
PRODUCT GUIDES PRODUCT GUIDES
Guide rail bending machine (manual)Types of guides
to be bentInternal curveposition of rollers
External curveposition of rollers
60151*
62811*
64374*
69232*
621462*
68179*
62821*
62801*
689371*
64566*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
84 85
Conveyor Components Conveyor Components
3 min
M8
714
18,5
28,525
28,5
M5
22,2
537
27
ø19
317
øADf
27
28,5
100
M5
27
d
22,2
537
27
ø19
ø12
ø10
ø12
312
0- 0,15
0- 0,15
0+
0,2
ø13,5
ø11,5
ø14
312
0- 0,15
0- 0,15
0+
0,2
3 min
Steel reinforcementplate
A
19 9,5
12
ø 8,122
38
A
17
M6
1713 2
Guide rail clamps for• Part. 223 • Part. 317 • Part. 219• Part. 273• Part. 393• Part. 596 • Part. 308
Part. 223
Part. 393 Part. 596 Part. 308
Part. 317 Part. 219 Part. 273 Part. 275
0,120,15
Part. Code
Pin dia.d
mm
1214210 P
620391618551
Weightkg
0,01
Weightkg
0,04
Weightkg
Part. 210 P Guide rail clamp
275 66811
- Material : guide rail clamps in acetal POM (black), bolt in stainless steel AISI 304.- Packaging : 100 pieces.
Part.
0,02
WeightkgCode
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
0,02
Part. CodeØ Amm
1011,5
Bore dia.Df
mm
1213,5
Use
for pins dia. 12for pins dia. 14210
60037259941
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
Pin dia. 12 mm Pin dia. 14 mm
Part. 210 Part. 215
21516,517
6012165976
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part.A
mm Code
Part. 216
216For guides with S= 1,5For guides with S= 2
16,517
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part. UseA
mm Code
For guides with S= 1,5For guides with S= 2
Use
• Pin dimensions for Part. 210
• Assembly of Part. 275
• Assembly of Part. 215
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Guide rail clamp
Guide rail clamp
Guide rail clamp
Guide rail clamp
for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308
60131*64244
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
84 85
Conveyor Components Conveyor Components
3 min
M8
714
18,5
28,525
28,5
M5
22,2
537
27
ø19
317
øADf
27
28,5
100
M5
27
d
22,2
537
27
ø19
ø12
ø10
ø12
312
0- 0,15
0- 0,15
0+
0,2
ø13,5
ø11,5
ø14
312
0- 0,15
0- 0,15
0+
0,2
3 min
Steel reinforcementplate
A
19 9,5
12
ø 8,122
38
A
17
M6
1713 2
Guide rail clamps for• Part. 223 • Part. 317 • Part. 219• Part. 273• Part. 393• Part. 596 • Part. 308
Part. 223
Part. 393 Part. 596 Part. 308
Part. 317 Part. 219 Part. 273 Part. 275
0,120,15
Part. Code
Pin dia.d
mm
1214210 P
620391618551
Weightkg
0,01
Weightkg
0,04
Weightkg
Part. 210 P Guide rail clamp
275 66811
- Material : guide rail clamps in acetal POM (black), bolt in stainless steel AISI 304.- Packaging : 100 pieces.
Part.
0,02
WeightkgCode
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
0,02
Part. CodeØ Amm
1011,5
Bore dia.Df
mm
1213,5
Use
for pins dia. 12for pins dia. 14210
60037259941
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
Pin dia. 12 mm Pin dia. 14 mm
Part. 210 Part. 215
21516,517
6012165976
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part.A
mm Code
Part. 216
216For guides with S= 1,5For guides with S= 2
16,517
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part. UseA
mm Code
For guides with S= 1,5For guides with S= 2
Use
• Pin dimensions for Part. 210
• Assembly of Part. 275
• Assembly of Part. 215
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Guide rail clamp
Guide rail clamp
Guide rail clamp
Guide rail clamp
for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308
60131*64244
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
86 87
Conveyor Components Conveyor Components
7
8Part. 211
Part. 446
15
56
93
2125
11 100
63d
ø4
h11
18
ø12m
in
M10
14
ø12m
in
M10
2125
11
63
M10
UN
I 558
8-65 ø1
0,5
56
93
26,559
3328
16,5
I
8,5 M5
M8
25X8
25,557
4128
23,5
I
8,5 M5
M8
25X8
21
11,5
1,5
50
86
15
3
38
63,5
A
10,5
1,6
1,6
1,9 1,9
1,9
1,9
1,61,61,
91,
9
1,61,6
1,6
1,6
1,9 1,9
Part. 211
Part. 211
Part. 446
Part. 213
Part. 217
Part. 214
21716,517
60141695131
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part.A
mm Code
Part. 213
For guides with S= 1,5For guides with S= 2
Use
211 59961
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 100 pieces.
Part. Code
8
Imm
446 607651
Part. Code
15
Imm
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
0,190,220,25
Part. Code
Pin dia.d
mm
121416
213600916018160191
Weightkg
0,05
Weightkg
0,05
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
213 60101
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
214 60111
Part. Code
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Position of platefor assemblyof guides ofthicknesss = 1,5.
Position of platefor assemblyof guides ofthickness s = 2.The plate isturned through 90°.
• Assembly of Part. 211 Unlimited height adjustment possible
• Assembly of Part. 211-446 PET bottle movement (subject to swelling).
The plate inside the clamp must be positioned to suit the thickness of the guide.
• Pin dimensions for Part. 213
• Pin dimensions for Part. 217
• Assembly of Part. 214
• Assembly of Part. 213
0,08
Weightkg
0,14
Weightkg
0,02
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308
Adjustable guide rail clamp
Double guide rail clamp
Double guide rail clampAdjustable guide rail clamp
Distance I = 8 mm
Distance I = 15 mm
Double guide rail clamp
Joint clamp
Position of platefor assemblyof guides ofthicknesss = 1,5.
Position of platefor assemblyof guides ofthickness s = 2.The plate isturned through 90°.
The plate inside the clamp must be positioned to suit the thickness of the guide.
• Assembly of Part. 213
86 87
Conveyor Components Conveyor Components
7
8Part. 211
Part. 446
15
56
93
2125
11 100
63d
ø4
h11
18
ø12m
in
M10
14
ø12m
in
M10
2125
11
63
M10
UN
I 558
8-65 ø1
0,5
56
93
26,559
3328
16,5
I
8,5 M5
M8
25X8
25,557
4128
23,5
I
8,5 M5
M8
25X8
21
11,5
1,5
50
86
15
3
38
63,5
A
10,5
1,6
1,6
1,9 1,9
1,9
1,9
1,61,6
1,9
1,9
1,61,6
1,6
1,6
1,9 1,9
Part. 211
Part. 211
Part. 446
Part. 213
Part. 217
Part. 214
21716,517
60141695131
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Part.A
mm Code
Part. 213
For guides with S= 1,5For guides with S= 2
Use
211 59961
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 100 pieces.
Part. Code
8
Imm
446 607651
Part. Code
15
Imm
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
0,190,220,25
Part. Code
Pin dia.d
mm
121416
213600916018160191
Weightkg
0,05
Weightkg
0,05
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
213 60101
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
214 60111
Part. Code
- Material : stainless steel AISI 304.- Packaging : 50 pieces.
Position of platefor assemblyof guides ofthicknesss = 1,5.
Position of platefor assemblyof guides ofthickness s = 2.The plate isturned through 90°.
• Assembly of Part. 211 Unlimited height adjustment possible
• Assembly of Part. 211-446 PET bottle movement (subject to swelling).
The plate inside the clamp must be positioned to suit the thickness of the guide.
• Pin dimensions for Part. 213
• Pin dimensions for Part. 217
• Assembly of Part. 214
• Assembly of Part. 213
0,08
Weightkg
0,14
Weightkg
0,02
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308for Part. 223 - 317 - 219 - 273 - 393 - 596 - 308
Adjustable guide rail clamp
Double guide rail clamp
Double guide rail clampAdjustable guide rail clamp
Distance I = 8 mm
Distance I = 15 mm
Double guide rail clamp
Joint clamp
Position of platefor assemblyof guides ofthicknesss = 1,5.
Position of platefor assemblyof guides ofthickness s = 2.The plate isturned through 90°.
The plate inside the clamp must be positioned to suit the thickness of the guide.
• Assembly of Part. 213
88 89
Conveyor Components Conveyor Components
60
31
40,5
6M5 8,5 14,5
ø 10
ø 17
90
55 2735
1020
20
59
ø11
Seat
for n
ut M
10 U
NI 5
589-
65
ø21
90
55 3527 100
1020
20
59
dh1
1
8 14,3
ø 10
,3
d d
27
M10
60
31
dh1
1
40,5 100
6M5
60
318,
5
25,5
6
21,540,5
25x8M5
M8
Part. 237
Part. 247
Part. 236
Part. 116
Part. 111
d = dia. 12 to 16 mm
236 63141
Part. Code
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
0,200,230,26
Part. Code
Pin dia.d
mm
121416
116515905160055010
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
111 51580
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304.- State of supply : supplied without tightening nut.- Packaging : 50 pieces.
Part. 236
0,130,180,23
Part. Code
Pin dia.d
mm
121416
236
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. 237
237 63151
Part. Code
0,06
Weightkg
0,08
Weightkg
0,06
Weightkg
• Pin dimensions for Part. 236 • Pin dimensions for Part. 111
Guide rail clamps for• Part. 247
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Guide rail clamp
Guide rail clamp Double guide rail clamp
Double guide rail clamp
Adjustable guide rail clamp
for Part. 247
• Assembly of Part. 237 Unlimited height adjustment possible
639316394163951*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
88 89
Conveyor Components Conveyor Components
60
31
40,5
6M5 8,5 14,5
ø 10
ø 17
90
55 2735
1020
20
59
ø11
Seat
for n
ut M
10 U
NI 5
589-
65
ø21
90
55 3527 100
1020
20
59
dh1
1
8 14,3
ø 10
,3
d d
27
M10
60
31
dh1
1
40,5 100
6M5
60
318,
5
25,5
6
21,540,5
25x8M5
M8
Part. 237
Part. 247
Part. 236
Part. 116
Part. 111
d = dia. 12 to 16 mm
236 63141
Part. Code
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
0,200,230,26
Part. Code
Pin dia.d
mm
121416
116515905160055010
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
111 51580
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304.- State of supply : supplied without tightening nut.- Packaging : 50 pieces.
Part. 236
0,130,180,23
Part. Code
Pin dia.d
mm
121416
236
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. 237
237 63151
Part. Code
0,06
Weightkg
0,08
Weightkg
0,06
Weightkg
• Pin dimensions for Part. 236 • Pin dimensions for Part. 111
Guide rail clamps for• Part. 247
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Guide rail clamp
Guide rail clamp Double guide rail clamp
Double guide rail clamp
Adjustable guide rail clamp
for Part. 247
• Assembly of Part. 237 Unlimited height adjustment possible
639316394163951*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
90 91
Conveyor Components Conveyor Components
ø12
ø10
ø12
312
0- 0,15
0- 0,15
0+
0,2
ø13,5
ø11,5
ø14
312
0- 0,15
0- 0,15
0+
0,2
24,5
ø 20
d
dg
38
27
21
M5
35,5
100
24,5dg
ø ADf
ø 20
3
38
27
21
17 ø 5,
5 35,5
5
4
8
2
ø 8
ø 12
ø 14
ø 12
25x8 plate
5725,5
8,5B
C M8
dg
A
I
35
58
25
M6 14
M5
31,2538,25
19
25x6 plate
5725,5
6,5
32,5
21 M8
10
15,812
Part. 159Code 6912
Part. 159Code 6913Part. 159Code 57211
Part. 437
ø 12 max.
M6
19
Ø 8-10-12-14-16
Part. 82 P
Part. 82-82 B
0,12
Part. Code
Pin dia.d
mm
12
Guide dia.dgmm
12
82 P
61849114 618501
0,151412 61851114 618521
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
0,01
Part. CodeØ Amm
10
Bore dia.Df
mm
12
Guide dia.dgmm
12
Use
for pins dia. 12
82
6686114
11,513,512
for pins dia. 1414
0,01
101212
for pins dia. 12
82 B
6683814 66848
11,513,512
for pins dia. 14607251
14 607261
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 100 pieces.
Pin dia. 12 mm Pin dia. 14 mm
• Without tightening bolt
• With tightening bolt
Part. 478
Part. 451
Part. 159-437
451 63389
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. Code
Part. Code
Guide dia.dgmm
8
159
437
6912010 622381
12 6913014
Imm
1212
1415
Amm
15,515,8
0,05
0,05
17,819,5
Bmm
Weightkg
32,532,5
3535
Cmm
2121
2525 57211
12 18 22 41 25 68089
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
478 670151
- Material : guide rail clamps in reinforced polyamide PA FV (black). Insert in brass. Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. Code
0,05
Weightkg
0,06
Weightkg
Guide rail clamps for• Round steel rods
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
for round steel rods
Adjustable guide rail clamps
Guide rail clamp
Guide rail clamp
Adjustable guide rail clamp
Pivoting guide rail clamp
• Pin dimensions for Part. 82 - 82 B
• Assembly of Part. 159-437 PET bottle movement (subject to swelling).
It is possible an inclination of 2° of the guide rail
2°
• Assembly of Part. 478
• Pin dimensions for Part. 478
Recommended for inclined conveyors (with any angle).
For 25 x 8 plates
For 25 x 6 plates
Pivoting
66871*50930*50940*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
90 91
Conveyor Components Conveyor Components
ø12
ø10
ø12
312
0- 0,15
0- 0,15
0+
0,2
ø13,5
ø11,5
ø14
312
0- 0,15
0- 0,15
0+
0,2
24,5
ø 20
d
dg
38
27
21
M5
35,5
100
24,5dg
ø ADf
ø 20
3
38
27
21
17 ø 5,
5 35,5
5
4
8
2
ø 8
ø 12
ø 14
ø 12
25x8 plate
5725,5
8,5B
C M8
dg
A
I
35
58
25
M6 14
M5
31,2538,25
19
25x6 plate
5725,5
6,5
32,5
21 M8
10
15,812
Part. 159Code 6912
Part. 159Code 6913Part. 159Code 57211
Part. 437
ø 12 max.
M6
19
Ø 8-10-12-14-16
Part. 82 P
Part. 82-82 B
0,12
Part. Code
Pin dia.d
mm
12
Guide dia.dgmm
12
82 P
61849114 618501
0,151412 61851114 618521
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
0,01
Part. CodeØ Amm
10
Bore dia.Df
mm
12
Guide dia.dgmm
12
Use
for pins dia. 12
82
6686114
11,513,512
for pins dia. 1414
0,01
101212
for pins dia. 12
82 B
6683814 66848
11,513,512
for pins dia. 14607251
14 607261
Weightkg
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolt in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 100 pieces.
Pin dia. 12 mm Pin dia. 14 mm
• Without tightening bolt
• With tightening bolt
Part. 478
Part. 451
Part. 159-437
451 63389
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. Code
Part. Code
Guide dia.dgmm
8
159
437
6912010 622381
12 6913014
Imm
1212
1415
Amm
15,515,8
0,05
0,05
17,819,5
Bmm
Weightkg
32,532,5
3535
Cmm
2121
2525 57211
12 18 22 41 25 68089
- Material : guide rail clamps in reinforced polyamide PA FV (black). Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
478 670151
- Material : guide rail clamps in reinforced polyamide PA FV (black). Insert in brass. Bolts in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.
Part. Code
0,05
Weightkg
0,06
Weightkg
Guide rail clamps for• Round steel rods
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
for round steel rods
Adjustable guide rail clamps
Guide rail clamp
Guide rail clamp
Adjustable guide rail clamp
Pivoting guide rail clamp
• Pin dimensions for Part. 82 - 82 B
• Assembly of Part. 159-437 PET bottle movement (subject to swelling).
It is possible an inclination of 2° of the guide rail
2°
• Assembly of Part. 478
• Pin dimensions for Part. 478
Recommended for inclined conveyors (with any angle).
For 25 x 8 plates
For 25 x 6 plates
Pivoting
66871*50930*50940*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
92 93
Conveyor Components Conveyor Components
55
71
5991
27
67d
19,5 100
h11
12
55
71
5991
27
19,5
ø11
ø21
67
12Se
at fo
r nut
M10
UNI
558
8
17
M10
10025
74
ø12
21
53d
h11
4210
23,557,5
8,5
30 402,
5
180°
M 8
26,5
53
The clamp allow the guide to be mounted at an angle
Inclination up to 90°
Part. 359
Part. 227
Part. 193
Part. 71
Part. 70
0,200,220,26
Part. Code
Pin dia.d
mm
121416
71
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
70 50950
Part. Code
Part. 50
0,340,360,38
Part. Code
Pin dia.d
mm
121416
505380151000647871
Weightkg
- Material : guide rail clamp and tightening nut in stainless. steel AISI 304. Pin in stainless steel AISI 303. - Packaging : 50 pieces.
0,09
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Double guide rail clamp
Double guide rail clamp
Double guide rail clamp
• Pin dimensions for Part. 70 Part. 373
Spacer for double execution guide rail
Spacer for triple execution guide rail
For the use of double and triple execution rails it is necessary a spacer.
• Assembly of Part. 373
0,11
Part. Material Code
Stainless steel AISI 304Zinc plated steel373 63506
64156
Weightkg
- Packaging : 50 pieces.- Suitable to use in curves also.- On request the clamps can be supplied complete with pins (with measurements to drawing).
Part. 128 S Part. 128Part. 128Part. 128 Guide rail clamps for• Part. 128 S• Part. 128
Guide rail clamp
for round steel rods
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304.- State of supply : supplied without tightening nut.- Packaging : 50 pieces.
509605097050980*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
92 93
Conveyor Components Conveyor Components
55
71
5991
27
67d
19,5 100
h11
12
55
71
5991
27
19,5
ø11
ø21
67
12Se
at fo
r nut
M10
UNI
558
8
17
M10
10025
74
ø12
21
53d
h11
4210
23,557,5
8,5
30 402,
5
180°
M 8
26,5
53
The clamp allow the guide to be mounted at an angle
Inclination up to 90°
Part. 359
Part. 227
Part. 193
Part. 71
Part. 70
0,200,220,26
Part. Code
Pin dia.d
mm
121416
71
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.
70 50950
Part. Code
Part. 50
0,340,360,38
Part. Code
Pin dia.d
mm
121416
505380151000647871
Weightkg
- Material : guide rail clamp and tightening nut in stainless. steel AISI 304. Pin in stainless steel AISI 303. - Packaging : 50 pieces.
0,09
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Double guide rail clamp
Double guide rail clamp
Double guide rail clamp
• Pin dimensions for Part. 70 Part. 373
Spacer for double execution guide rail
Spacer for triple execution guide rail
For the use of double and triple execution rails it is necessary a spacer.
• Assembly of Part. 373
0,11
Part. Material Code
Stainless steel AISI 304Zinc plated steel373 63506
64156
Weightkg
- Packaging : 50 pieces.- Suitable to use in curves also.- On request the clamps can be supplied complete with pins (with measurements to drawing).
Part. 128 S Part. 128Part. 128Part. 128 Guide rail clamps for• Part. 128 S• Part. 128
Guide rail clamp
for round steel rods
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304.- State of supply : supplied without tightening nut.- Packaging : 50 pieces.
509605097050980*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
94 95
Conveyor Components Conveyor Components
21
ø12m
in
M10
30 100
5,5
60
90
dh1
1
60
90
30
5,5
M10
18
ø10,
5
8
3
98
d
65
4
34 100
h11
18
M10
98
M10
UN
I 558
8-65
65
4
34
ø10,
5
18
Part. 298
Part. 184
0,180,220,25
Part. Code
Pin dia.d
mm
121416
190557415575155761
Weightkg
184 54961
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
The protrusion of the pinallows the guide to belocked axially
0,120,250,29
Part. Code
Pin dia.d
mm
121416
298603726038260392
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer and tightening screws in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer and tightening screws in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
1) Untighten the screws
2) Clip on to the profile
3) Slide along the guide to the desired position and tighten screws to lock in place.
298 60362
Part. Code
Part. 190
Part. 298
0,09
Weightkg
0,12
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Part. 296 Guide rail clamps for• Part. 296
Guide rail clamps for• Part. 191
Part. 191
• Assembly of Part. 190 • Assembly of Part. 298
• Pin dimensions for Part. 184 • Pin dimensions for Part. 298
Guide rail clamp
Guide rail clamp
Guide rail clamp
Guide rail clamp
94 95
Conveyor Components Conveyor Components
21
ø12m
in
M10
30 100
5,5
60
90
dh1
1
60
90
30
5,5
M10
18
ø10,
5
8
3
98
d65
4
34 100h1
1
18
M10
98
M10
UN
I 558
8-65
65
4
34
ø10,
5
18
Part. 298
Part. 184
0,180,220,25
Part. Code
Pin dia.d
mm
121416
190557415575155761
Weightkg
184 54961
Part. Code
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer in stainless steel AISI 304. Nut in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
The protrusion of the pinallows the guide to belocked axially
0,120,250,29
Part. Code
Pin dia.d
mm
121416
298603726038260392
Weightkg
- Material : guide rail clamp in reinforced polyamide PA FV (black). Pin in stainless steel AISI 303. Washer and tightening screws in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
- Material : guide rail clamp in reinforced polyamide PA FV (black). Washer and tightening screws in stainless steel AISI 304. Nuts in nickel plated brass.- Packaging : 50 pieces.- Suitable to use in curves also.
1) Untighten the screws
2) Clip on to the profile
3) Slide along the guide to the desired position and tighten screws to lock in place.
298 60362
Part. Code
Part. 190
Part. 298
0,09
Weightkg
0,12
Weightkg
GUIDE RAIL CLAMPS GUIDE RAIL CLAMPS
Part. 296 Guide rail clamps for• Part. 296
Guide rail clamps for• Part. 191
Part. 191
• Assembly of Part. 190 • Assembly of Part. 298
• Pin dimensions for Part. 184 • Pin dimensions for Part. 298
Guide rail clamp
Guide rail clamp
Guide rail clamp
Guide rail clamp
96 97
Conveyor Components Conveyor Components
154
A A
10,545
6,535,5
17,5
34,5
76
15
7058
26 20
2,5
31
d
4
19
10View A-A
View A-A
6,5
A A
10,545
18
17
110
67
30 25,5
17,5
22,5
3026
,580
,520
3
8,536
48d
13
8,5
10,5
45
15
17,5
34,5
7615
4
35,5
M6
470
58
26 20
31d
2,519
32,5
10,54517
,522
,530
26,5
80,5
203
17
110
67
30 25,5
48
d
36 32,5
18
P
P
P
PA
PP FV
P
M8
Part. 88Part. 81
Part. 89BracketPart. 72
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket Bracket with ratchet handle clamping
Bracket with ratchet handle clamping
0,11
Part. Code
Pin dia.d
mm
121481 50770
50780*
Weightkg
Polyamide PA(black)
Material
- Standard packaging : supplied without tightening bolt.- Tightening bolt required : bolt M6 x 25 UNI 5931, DIN 912. Nut M6 UNI 5587-68.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
0,17
Part. Code
Pin dia.d
mm
1416
72
5079050800
Weightkg
Polyamide PA(black)
0,171416
Reinforcedpolypropylene PP FV (black)
Material
- Standard packaging : supplied without tightening bolt.- Tightening bolt required : bolt M8 x 25 UNI 5931, DIN 912. Nut M8 UNI 5587-68.- Max recommended tightening torque : 1 Kgm.- Packaging : 50 pieces.
0,15
Part. Code
Pin diad
mm
121488 50730
50740
Weightkg
Polyamide PA(black)
Material
- Ratchet lever material : grip in acetal POM (black), threaded shank in stainless steel AISI 303, fixing nut in nickel plated brass.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
- Ratchet lever material : grip in acetal POM (black), threaded shank in stainless steel AISI 303, fixing nut in nickel plated brass.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
0,22
Part. Code
Pin diad
mm
121416
89697055075050760
Weightkg
Polyamide PA(black)
Material
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 81
• Assembly of drip tray support Part. 226-336, see page 112 Part. 81 and 72 permit application of drip tray support.
• Accessories
• Assembly of drip tray support Part. 226-336, see page 112 Part. 88 and 89 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 72
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 88
• Deflection of Part. 89
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
Spacer Part. 142, see page 110.Applicable to Part. 72
Square washer Part. 96, see page 111.Applicable to Part. 81-72distributes force fromtightening over larger area.
• Accessories
Spacer Part. 142, see page 110.Applicable to Part. 89
Square washer Part. 96, see page 111.Applicable to Part. 88-89distributes force fromtightening over larger area.
Part. 81-72
Part. 96
Part. 142
Part. 72
Part. 226-336 Part. 226-336
Part. 89
Part. 142
Part. 96
Part. 88-89
• Technical data Part. 81 - Sliding load resistance :
1020 N (with d = 12)2000 N (with d = 14)
2500 N
- Breaking load :
• Technical data Part. 72 - Sliding load resistance :
Material in PA2700 N (with d = 14)2200 N (with d = 16)Material in PP FV800 N (with d = 14)600 N (with d = 16)
Material in PA2700 NMaterial in PP FV2200 N
- Breaking load :
Tests performed at tightening torque : 0,6 Kgm
• Technical data Part. 88 - Sliding load resistance :
1400 N (with d = 12)2000 N (with d = 14)
2500 N
- Breaking load :
Tests performed at tightening torque : 0,6 Kgm
• Technical data Part. 89 - Sliding load resistance :
1450 N (with d = 12)1300 N (with d = 14)1100 N (with d = 16)
2700 N
- Breaking load :
Tests performed at tightening torque : 0,6 KgmTests performed at tightening torque : 1 Kgm
5712057130*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
96 97
Conveyor Components Conveyor Components
154
A A
10,545
6,535,5
17,5
34,5
76
15
7058
26 20
2,5
31
d
4
19
10View A-A
View A-A
6,5
A A
10,545
18
17
110
67
30 25,5
17,5
22,5
3026
,580
,520
3
8,536
48d
13
8,5
10,5
45
15
17,5
34,5
7615
4
35,5
M6
470
58
26 20
31d
2,519
32,5
10,54517
,522
,530
26,5
80,5
203
17
110
67
30 25,5
48
d
36 32,5
18
P
P
P
PA
PP FV
P
M8
Part. 88Part. 81
Part. 89BracketPart. 72
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket Bracket with ratchet handle clamping
Bracket with ratchet handle clamping
0,11
Part. Code
Pin dia.d
mm
121481 50770
50780*
Weightkg
Polyamide PA(black)
Material
- Standard packaging : supplied without tightening bolt.- Tightening bolt required : bolt M6 x 25 UNI 5931, DIN 912. Nut M6 UNI 5587-68.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
0,17
Part. Code
Pin dia.d
mm
1416
72
5079050800
Weightkg
Polyamide PA(black)
0,171416
Reinforcedpolypropylene PP FV (black)
Material
- Standard packaging : supplied without tightening bolt.- Tightening bolt required : bolt M8 x 25 UNI 5931, DIN 912. Nut M8 UNI 5587-68.- Max recommended tightening torque : 1 Kgm.- Packaging : 50 pieces.
0,15
Part. Code
Pin diad
mm
121488 50730
50740
Weightkg
Polyamide PA(black)
Material
- Ratchet lever material : grip in acetal POM (black), threaded shank in stainless steel AISI 303, fixing nut in nickel plated brass.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
- Ratchet lever material : grip in acetal POM (black), threaded shank in stainless steel AISI 303, fixing nut in nickel plated brass.- Max recommended tightening torque : 0,6 Kgm.- Packaging : 50 pieces.
0,22
Part. Code
Pin diad
mm
121416
89697055075050760
Weightkg
Polyamide PA(black)
Material
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 81
• Assembly of drip tray support Part. 226-336, see page 112 Part. 81 and 72 permit application of drip tray support.
• Accessories
• Assembly of drip tray support Part. 226-336, see page 112 Part. 88 and 89 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 72
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 88
• Deflection of Part. 89
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
Spacer Part. 142, see page 110.Applicable to Part. 72
Square washer Part. 96, see page 111.Applicable to Part. 81-72distributes force fromtightening over larger area.
• Accessories
Spacer Part. 142, see page 110.Applicable to Part. 89
Square washer Part. 96, see page 111.Applicable to Part. 88-89distributes force fromtightening over larger area.
Part. 81-72
Part. 96
Part. 142
Part. 72
Part. 226-336 Part. 226-336
Part. 89
Part. 142
Part. 96
Part. 88-89
• Technical data Part. 81 - Sliding load resistance :
1020 N (with d = 12)2000 N (with d = 14)
2500 N
- Breaking load :
• Technical data Part. 72 - Sliding load resistance :
Material in PA2700 N (with d = 14)2200 N (with d = 16)Material in PP FV800 N (with d = 14)600 N (with d = 16)
Material in PA2700 NMaterial in PP FV2200 N
- Breaking load :
Tests performed at tightening torque : 0,6 Kgm
• Technical data Part. 88 - Sliding load resistance :
1400 N (with d = 12)2000 N (with d = 14)
2500 N
- Breaking load :
Tests performed at tightening torque : 0,6 Kgm
• Technical data Part. 89 - Sliding load resistance :
1450 N (with d = 12)1300 N (with d = 14)1100 N (with d = 16)
2700 N
- Breaking load :
Tests performed at tightening torque : 0,6 KgmTests performed at tightening torque : 1 Kgm
5712057130*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
98 99
Conveyor Components Conveyor Components
P
P
P
Part. 97
Part. 10
31,5
2440,5
10
57,5
84,5
22 40
48
d
15,5
95
37,555
53
9,5
3162,
551
,5
2440,5
10
75,5
86
22 40
49d
13,5
96,5
37,555
53
8,5
4,5
181
10,530,645
1680
8119
5240,
5
5068
980
109
68
64
23
d
48
PP FV
PA FV
P
La4116
,242
,577
,820
0
5066
964
4,5
7264
,5
45
49
d
2,5
31
25
Wrench 19
Wrench 19
M10
Part. 107Part. 85
Part. 599Bracket with eccentric leverPart. 10-97
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket with eccentric lever
Bracket with eyebolt
0,13
Part. Code
Pin dia.d
mm
121485 50810
50820
Weightkg
Reinforcedpolypropylene PP FV (black)
Material
- Packaging : 50 pieces.
0,14
Part. Code
Pin dia.d
mm
1410
97
50840
Weightkg
Reinforcedpolyamide PA FV (black)
0,141214
5085050860
Reinforcedpolypropylene PP FV (black)
Material
- Packaging : 50 pieces. - Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,11
Part. Code
Pin dia.d
mm
12599 613572
Weightkg
Reinforced polyamide PA FV (black)
Material
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 85
• Assembly of drip tray support Part. 226-336, see page 112 Part. 85-10-97 permit application of drip tray support.
• Assembly of drip tray support Part. 226-336, see page 112 Part. 107 and 599 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 10-97
• Deflection of Part. 107
• Accessories
Spacer Part. 61, see page 110.Applicable to Part. 10-97
• Accessories
Spacer Part. 61, see page 110.Applicable to Part. 107.
Spacer Part. 142, see page 110.Applicable to Part. 599.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 599
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
Bracket with eyebolt
Part.
CodePin dia.d
mm
107
Weightkg
Reinforced polyamide PA FV (black)
1214
Reinforced polypropylene PP FV (black)
Material La = 9 La = 10,5
• = Knob supplied without hexagonal nut for wrench 19 mm (economical version).- Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,15
1214
5071067811
107
Reinforced polyamide PA FV (black)
1214
5914167791
Reinforced polypropylene PP FV (black)
0,15
1214
6820067821
59151*67801
5735167781
• With knob
With knob With nut
• With nut
Part. 61Part. 61
Part. 226-336
Part. 226-336
Part. 10-97Part. 107
Part. 142Part. 599
• Technical data Part. 107 - Sliding load resistance :
Material in PA FV2000 N (with d = 12)3200 N (withd = 14)Material in PP FV1300 N (with d = 12)1700 N (with d = 14)
Material in PA FV4500 NMaterial in PP FV3300 N
- Breaking load :• Technical data Part. 85 - Sliding load resistance :
360 N (with d = 12-14) 1200 N
- Breaking load :
• Technical data Part. 599 - Sliding load resistance :
2000 N (with d = 12) 3000 N
- Breaking load :
• Technical data Part. 10-97 - Sliding load resistance :
Material in PA FV700 N (with d = 14)Material in PP FV360 N (with d = 12-14)
Material in PA FV2800 NMaterial in PP FV1200 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
Tests performed at tightening torque : 4 Kgm
57341*67771*
59121•67831•
59131•67841•
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
98 99
Conveyor Components Conveyor Components
P
P
P
Part. 97
Part. 10
31,5
2440,5
10
57,5
84,5
22 40
48
d
15,5
95
37,555
53
9,5
3162,
551
,5
2440,5
10
75,5
86
22 40
49d
13,5
96,5
37,555
53
8,5
4,5
181
10,530,645
1680
8119
5240,
5
5068
980
109
68
64
23
d
48
PP FV
PA FV
P
La4116
,242
,577
,820
0
5066
964
4,5
7264
,5
45
49
d
2,5
31
25
Wrench 19
Wrench 19
M10
Part. 107Part. 85
Part. 599Bracket with eccentric leverPart. 10-97
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket with eccentric lever
Bracket with eyebolt
0,13
Part. Code
Pin dia.d
mm
121485 50810
50820
Weightkg
Reinforcedpolypropylene PP FV (black)
Material
- Packaging : 50 pieces.
0,14
Part. Code
Pin dia.d
mm
1410
97
50840
Weightkg
Reinforcedpolyamide PA FV (black)
0,141214
5085050860
Reinforcedpolypropylene PP FV (black)
Material
- Packaging : 50 pieces. - Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,11
Part. Code
Pin dia.d
mm
12599 613572
Weightkg
Reinforced polyamide PA FV (black)
Material
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 85
• Assembly of drip tray support Part. 226-336, see page 112 Part. 85-10-97 permit application of drip tray support.
• Assembly of drip tray support Part. 226-336, see page 112 Part. 107 and 599 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 10-97
• Deflection of Part. 107
• Accessories
Spacer Part. 61, see page 110.Applicable to Part. 10-97
• Accessories
Spacer Part. 61, see page 110.Applicable to Part. 107.
Spacer Part. 142, see page 110.Applicable to Part. 599.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 599
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
Bracket with eyebolt
Part.
CodePin dia.d
mm
107
Weightkg
Reinforced polyamide PA FV (black)
1214
Reinforced polypropylene PP FV (black)
Material La = 9 La = 10,5
• = Knob supplied without hexagonal nut for wrench 19 mm (economical version).- Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,15
1214
5071067811
107
Reinforced polyamide PA FV (black)
1214
5914167791
Reinforced polypropylene PP FV (black)
0,15
1214
6820067821
59151*67801
5735167781
• With knob
With knob With nut
• With nut
Part. 61Part. 61
Part. 226-336
Part. 226-336
Part. 10-97Part. 107
Part. 142Part. 599
• Technical data Part. 107 - Sliding load resistance :
Material in PA FV2000 N (with d = 12)3200 N (withd = 14)Material in PP FV1300 N (with d = 12)1700 N (with d = 14)
Material in PA FV4500 NMaterial in PP FV3300 N
- Breaking load :• Technical data Part. 85 - Sliding load resistance :
360 N (with d = 12-14) 1200 N
- Breaking load :
• Technical data Part. 599 - Sliding load resistance :
2000 N (with d = 12) 3000 N
- Breaking load :
• Technical data Part. 10-97 - Sliding load resistance :
Material in PA FV700 N (with d = 14)Material in PP FV360 N (with d = 12-14)
Material in PA FV2800 NMaterial in PP FV1200 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
Tests performed at tightening torque : 4 Kgm
57341*67771*
59121•67831•
59131•67841•
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
100 101
Conveyor Components Conveyor Components
P
P
10,5
50,5
53
1483
95
224
41,5
80,5
51
111
81
50
29,5
Wre
nch
19
27
M10
269
d
10,527,640
1075
102
20525
0,5
50
965
100
87,1 50
,7
d
49
33
65,5
10,545
1680
157
ø30ø3638,5
64
3 7,5
24,5
ø10,5
32,5
109
48
25
P20
*48
4848
48
9
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
29
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
99
38*
47
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
20*
29
20*
29
Fig. 1 Fig. 2
38
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Wrench 19
Part. 193Part. 617
Bracket with eyeboltPart. 140
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket with eyebolt Adjustable bracket
• Assembly of drip tray support Part. 226-336, see page 112 Part. 140 - 617 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 140
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 617
Spacer Part. 142, see page 110.Applicable to Part. 140-617
With knob With nut
- Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,18
Part. Code
Pin dia.d
mm
12617 613562
Weightkg
Reinforced polyamide PA FV (black)
Material
0,47
Part. Code
Pin dia.d
mm
14÷1614066690
Weightkg
0,4757421
with knob
with nut
Version
Part. 142Part. 140-617
Part. 226-336
Part. 226-336
* = The bracket can be used with ø 14 and ø 16 mm pins.- Material : bracket and knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
- Packaging : 50 pieces.
0,21
Part. Code
193 69700
Weightkg
Reinforced polyamide PA FV (black)
Material
• Assembly of drip tray support Part. 226-336, see page 112 Part. 193 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 193
• Accessories
• Assembly with swivel head Part. 255
Part. 255page 108
Part. 359page 108
Part. 256page 108
Part. 192page 109
Part. 227 Code 61931page 109
• Assembly with swivel head Part. 359
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
• Assembly with swivel head Part. 256
• Assembly with swivel head Part. 192
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
Part. 142
Part. 193
Part. 193
Spacer Part. 142, see page 110.Applicable to Part. 193
• Accessories
• Pin dimensions for Part. 193
• Assembly of Part. 193
Part. 185page 129
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
• Technical data Part. 617 - Sliding load resistance :
2000 N (with d = 12) 3000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 140 - Sliding load resistance :
3000 N (with d = 14-16) 12000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 193 - Breaking load : 7000 N
*
*
100 101
Conveyor Components Conveyor Components
P
P
10,5
50,5
53
1483
95
224
41,5
80,5
51
111
81
50
29,5
Wre
nch
19
27
M10
269
d
10,527,640
1075
102
20525
0,5
50
965
100
87,1 50
,7
d
49
33
65,5
10,545
1680
157
ø30ø3638,5
64
3 7,5
24,5
ø10,5
32,5
109
48
25
P
20*
4848
4848
9
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
29
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
99
38*
47
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
20*
29
20*
29
Fig. 1 Fig. 2
38
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Wrench 19
Part. 193Part. 617
Bracket with eyeboltPart. 140
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Bracket with eyebolt Adjustable bracket
• Assembly of drip tray support Part. 226-336, see page 112 Part. 140 - 617 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 140
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 617
Spacer Part. 142, see page 110.Applicable to Part. 140-617
With knob With nut
- Material : knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,18
Part. Code
Pin dia.d
mm
12617 613562
Weightkg
Reinforced polyamide PA FV (black)
Material
0,47
Part. Code
Pin dia.d
mm
14÷1614066690
Weightkg
0,4757421
with knob
with nut
Version
Part. 142Part. 140-617
Part. 226-336
Part. 226-336
* = The bracket can be used with ø 14 and ø 16 mm pins.- Material : bracket and knob in reinforced polyamide (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nut and eyebolt in stainless steel AISI 304.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
- Packaging : 50 pieces.
0,21
Part. Code
193 69700
Weightkg
Reinforced polyamide PA FV (black)
Material
• Assembly of drip tray support Part. 226-336, see page 112 Part. 193 permit application of drip tray support.
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 193
• Accessories
• Assembly with swivel head Part. 255
Part. 255page 108
Part. 359page 108
Part. 256page 108
Part. 192page 109
Part. 227 Code 61931page 109
• Assembly with swivel head Part. 359
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
• Assembly with swivel head Part. 256
• Assembly with swivel head Part. 192
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
Part. 142
Part. 193
Part. 193
Spacer Part. 142, see page 110.Applicable to Part. 193
• Accessories
• Pin dimensions for Part. 193
• Assembly of Part. 193
Part. 185page 129
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
• Technical data Part. 617 - Sliding load resistance :
2000 N (with d = 12) 3000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 140 - Sliding load resistance :
3000 N (with d = 14-16) 12000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 193 - Breaking load : 7000 N
*
*
102 103
Conveyor Components Conveyor Components
P
10,545
53
1680
81
32,5
45
d
109
68
64
83
45
248,
5
Wrench 19
25
10,545
53
1680
8124
7
32,583
64
45
109
6845
420
M10ø15,3
25
Wre
nch
19
d*
*
P
1680
8120
1
109
6845
d
32,583
64
45
25
10,545
ø36
68*
9
77
68* 77
9
68*
77
Fig. 1 Fig. 2
86
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Part. 257
Adjustable bracket Part. 178
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Adjustable bracket
Spacer Part. 142, see page 110.Applicable to Part. 163-257
With knob Without knob
Stainless steel and brass swivel head
• With knob
• Without knob
0,50
Part. Code
Pin dia.d
mm
14 to 16178 5311160963
Weightkg
Stainless steel AISI 303Nickel plated brass
0,5014 to 16178 5312160973
Stainless steel AISI 303Nickel plated brass
Swivel head material
Part. 142Part. 163-257 * = The bracket can be used with dia. 14 and dia. 16 mm pins.
- Material : bracket and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
• Accessories
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 163-257
• Assembly of drip tray support Part. 226-336, see page 112 Part. 178 permit application of drip tray support.
Spacer Part. 142, see page 110.Applicable to Part. 178
Part. 142 Part. 178
Part. 226-336
• Accessories
• Assembly of Part. 178 (version without knob)
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 178
- Material : swivel head and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, eyebolt and tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,40
Part. Code
Pin dia.d
mm
121416
257645916460164611
Weightkg
Reinforced polyamide PA FV (black)
Material
Part. 163 Adjustable bracket
- Material : swivel head in reinforced polyamide (black), tightening nut and eyebolt in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,30
Part. Code
Pin dia.d
mm
121416
163696406965059031
Weightkg
Reinforced polyamide PA FV (black)
Material
• Assembly of drip tray support Part. 226-336, see page 112 Part. 163 - 257 permit application of drip tray support.
Part. 226-336
Spacer Part. 227, see page 109. Applicable to Part. 163Spacer Part. 227, see page 109. Applicable to Part. 178
Spacer Part. 227, see page 109. Applicable to Part. 257
Part. 163
Part. 178
Part. 257
Part. 227 Code 61931page 109
Part. 227 Code 61931page 109
M10 x 30
M10 x 40
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
• Technical data Part. 163-257 - Sliding load resistance :
2000 N (with d = 12)3000 N (with d = 14-16)
7000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 178 - Sliding load resistance :
6500 N (with d = 16) 7000 N
- Breaking load :
102 103
Conveyor Components Conveyor Components
P
10,545
53
1680
81
32,5
45
d
109
68
64
83
45
248,
5
Wrench 19
25
10,545
53
1680
8124
732,5
83
64
45
109
6845
420
M10ø15,3
25
Wre
nch
19
d*
*
P
1680
8120
1
109
6845
d
32,583
64
45
25
10,545
ø36
68*
9
77
68* 77
9
68*
77
Fig. 1 Fig. 2
86
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Part. 257
Adjustable bracket Part. 178
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Adjustable bracket
Spacer Part. 142, see page 110.Applicable to Part. 163-257
With knob Without knob
Stainless steel and brass swivel head
• With knob
• Without knob
0,50
Part. Code
Pin dia.d
mm
14 to 16178 5311160963
Weightkg
Stainless steel AISI 303Nickel plated brass
0,5014 to 16178 5312160973
Stainless steel AISI 303Nickel plated brass
Swivel head material
Part. 142Part. 163-257 * = The bracket can be used with dia. 14 and dia. 16 mm pins.
- Material : bracket and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
• Accessories
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 163-257
• Assembly of drip tray support Part. 226-336, see page 112 Part. 178 permit application of drip tray support.
Spacer Part. 142, see page 110.Applicable to Part. 178
Part. 142 Part. 178
Part. 226-336
• Accessories
• Assembly of Part. 178 (version without knob)
Load P (Newton)
Defle
ctio
n (m
m)
300200 400 500 1000100
0,5
1,5
1
4
6
2
• Deflection of Part. 178
- Material : swivel head and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, eyebolt and tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,40
Part. Code
Pin dia.d
mm
121416
257645916460164611
Weightkg
Reinforced polyamide PA FV (black)
Material
Part. 163 Adjustable bracket
- Material : swivel head in reinforced polyamide (black), tightening nut and eyebolt in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 50 pieces.
0,30
Part. Code
Pin dia.d
mm
121416
163696406965059031
Weightkg
Reinforced polyamide PA FV (black)
Material
• Assembly of drip tray support Part. 226-336, see page 112 Part. 163 - 257 permit application of drip tray support.
Part. 226-336
Spacer Part. 227, see page 109. Applicable to Part. 163Spacer Part. 227, see page 109. Applicable to Part. 178
Spacer Part. 227, see page 109. Applicable to Part. 257
Part. 163
Part. 178
Part. 257
Part. 227 Code 61931page 109
Part. 227 Code 61931page 109
M10 x 30
M10 x 40
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
• Technical data Part. 163-257 - Sliding load resistance :
2000 N (with d = 12)3000 N (with d = 14-16)
7000 N
- Breaking load :
Tests performed at tightening torque : 4 Kgm
• Technical data Part. 178 - Sliding load resistance :
6500 N (with d = 16) 7000 N
- Breaking load :
104 105
Conveyor Components Conveyor Components
42
15,2
599
,526
2
134
104
d
2510,5
123
413
010
8
9
51
42
15,2
599
,524
4
134
86d
2510,5
105
413
090
9
51
ø3042
3 8
ø10,5
42
15,2
599
,520
0
134
66
2510,5
85
413
070
9
51
20*
70 (
66)
70 (
66)
70 (
66)
929
9
9
108*
(10
4*)
117
(113
)
20*
29
20*
29
Fig. 1 Fig. 2
38
938*
70 (
66)
47
90*
(86*
) 9
99 (
95)
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
• Assembly of drip tray support Part. 226-336, see page 112 Part. 541-542 permit application of drip tray support.
Spacer Part. 545, see page 111.Applicable to Part. 541-542
Part. 545Part. 541-542
Part. 226-336
Spacer Part. 227, see page 109. Applicable to Part. 542
Spacer Part. 227, see page 109. Applicable to Part. 541
• Accessories
0,15
Part. Code
Pin dia.d
mm
121416
541689021689041683561
Weightkg
121416
Without lip
689031689051683571
With lip
Version
Part. 541Adjustable bracketWithout lipWith lip
- Material : bracket and swivel head in reinforced polyamide (black), eyebolt in nickel plated brass, tightening nut in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Part. 540 Part. 542Adjustable bracket Adjustable bracket
- Material : bracket and swivel head in reinforced polyamide (black), tightening nut and eyebolt in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
0,15
Part. Code
Pin dia.d
mm
121416
542
Weightkg
121416
With lip Without lip Without lipWith lip
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,15
Part. Code
540683551683541
Weightkg
With lipWithout lip
683581683591683601
Without lip
Version Version
Part. 255page 108
Part. 541
Part. 542
Part. 256page 108
Part. 192page 109
Part. 227 Code 61931page 109
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
Part.359page 108
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
Part. 185page 129
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
683611683621683631
With lip
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 540 permit application of drip tray support.
Part. 545
Part. 540
Part. 540
• Accessories
• Pin dimensions for Part. 540
• Assembly of Part. 540
Spacer Part. 545, see page 111.Applicable to Part. 540
Part. 227 Code 61931page 109
• Assembly with swivel head Part. 255
• Assembly with swivel head Part. 359
• Assembly with swivel head Part. 256
• Assembly with swivel head Part. 192
104 105
Conveyor Components Conveyor Components
42
15,2
599
,526
2
134
104
d
2510,5
123
413
010
8
9
51
42
15,2
599
,524
4
134
86d
2510,5
105
413
090
9
51
ø3042
3 8
ø10,5
42
15,2
599
,520
0
134
66
2510,5
85
413
070
9
51
20*
70 (
66)
70 (
66)
70 (
66)
929
9
9
108*
(10
4*)
117
(113
)
20*
29
20*
29
Fig. 1 Fig. 2
38
938*
70 (
66)
47
90*
(86*
) 9
99 (
95)
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 spacer Part. 227 code 61931. The length of the thread allows for only 1 spacer.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
• Assembly of drip tray support Part. 226-336, see page 112 Part. 541-542 permit application of drip tray support.
Spacer Part. 545, see page 111.Applicable to Part. 541-542
Part. 545Part. 541-542
Part. 226-336
Spacer Part. 227, see page 109. Applicable to Part. 542
Spacer Part. 227, see page 109. Applicable to Part. 541
• Accessories
0,15
Part. Code
Pin dia.d
mm
121416
541689021689041683561
Weightkg
121416
Without lip
689031689051683571
With lip
Version
Part. 541Adjustable bracketWithout lipWith lip
- Material : bracket and swivel head in reinforced polyamide (black), eyebolt in nickel plated brass, tightening nut in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Part. 540 Part. 542Adjustable bracket Adjustable bracket
- Material : bracket and swivel head in reinforced polyamide (black), tightening nut and eyebolt in stainless steel AISI 304.- Operation : by untightening the nut, the position of the top and the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
0,15
Part. Code
Pin dia.d
mm
121416
542
Weightkg
121416
With lip Without lip Without lipWith lip
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,15
Part. Code
540683551683541
Weightkg
With lipWithout lip
683581683591683601
Without lip
Version Version
Part. 255page 108
Part. 541
Part. 542
Part. 256page 108
Part. 192page 109
Part. 227 Code 61931page 109
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
Part.359page 108
Part. 227 Code 61931page 109
M10 x 35
M10 x 45
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
Part. 185page 129
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
683611683621683631
With lip
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 540 permit application of drip tray support.
Part. 545
Part. 540
Part. 540
• Accessories
• Pin dimensions for Part. 540
• Assembly of Part. 540
Spacer Part. 545, see page 111.Applicable to Part. 540
Part. 227 Code 61931page 109
• Assembly with swivel head Part. 255
• Assembly with swivel head Part. 359
• Assembly with swivel head Part. 256
• Assembly with swivel head Part. 192
106 107
Conveyor Components Conveyor Components
90*
(86*
) 9
99 (
95)
42
15,2
599
,529
1,5
2510,5
105
413
090
9
134
86d
51
Wre
nch
19
*
*
42
15,2
599
,529
0
134
86d
2510,5
105
413
090
9
51
Wre
nch
19
90*
(86*
)
99 (
95)
Fig. 1 Fig. 2
108
(104
)
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Part. 543Part. 544
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Adjustable bracket Adjustable bracket
Stainless steel and brass swivel head
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 543 permit application of drip tray support.Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 544 permit application of drip tray support.
Part. 544
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
0,15
Part. Code
Pin dia.d
mm
121416
544683701683711683721
Weightkg
121416
Without lip
683731683741683751
With lip
Version
- Material : bracket, swivel head and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, eyebolt and tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Without lipWith lip
• With lip
• Without lip
0,15
Part. Code
Pin dia.d
mm
14 to 16543 683671683691
Weightkg
Stainless steel AISI 303Nickel plated brass
0,1514 to 16543 683641683661
Stainless steel AISI 303Nickel plated brass
Swivel head material
* = The bracket can be used with dia. 14 and dia. 16 mm pins.- Material : bracket and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Without lipWith lip
Part. 545Part. 544
Spacer Part. 545, see page 111.Applicable to Part. 544
• Accessories
Spacer Part. 227, see page 109. Applicable to Part. 544
Part. 543
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
Part. 545Part. 543
Spacer Part. 545, see page 111.Applicable to Part. 543
• Accessories
Spacer Part. 227, see page 109. Applicable to Part. 543
106 107
Conveyor Components Conveyor Components
90*
(86*
) 9
99 (
95)
42
15,2
599
,529
1,5
2510,5
105
413
090
9
134
86d
51
Wre
nch
19
*
*
42
15,2
599
,529
0
134
86d
2510,5
105
413
090
9
51
Wre
nch
19
90*
(86*
)
99 (
95)
Fig. 1 Fig. 2
108
(104
)
* = To increase the height (by 9 mm) use 1 or more spacer Part. 227 code 61931. To use the spacer it is necessary alonger screw.
* = To increase the height use 1 or more spacer Part. 227. To use the spacer it is necessary a longer screw.
Fig. 1 With single spacerassembly use code 62581.
Fig. 2 With multiple spacers use only 1 spacer code 62581 and 1 or more spacers code 61931.
Part. 543Part. 544
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Adjustable bracket Adjustable bracket
Stainless steel and brass swivel head
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 543 permit application of drip tray support.Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 544 permit application of drip tray support.
Part. 544
Part. 227 Code 61931page 109
Part. 183page 129
M10 x 30
M10 x 40
0,15
Part. Code
Pin dia.d
mm
121416
544683701683711683721
Weightkg
121416
Without lip
683731683741683751
With lip
Version
- Material : bracket, swivel head and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, eyebolt and tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Without lipWith lip
• With lip
• Without lip
0,15
Part. Code
Pin dia.d
mm
14 to 16543 683671683691
Weightkg
Stainless steel AISI 303Nickel plated brass
0,1514 to 16543 683641683661
Stainless steel AISI 303Nickel plated brass
Swivel head material
* = The bracket can be used with dia. 14 and dia. 16 mm pins.- Material : bracket and knob in reinforced polyamide PA FV (black), hexagonal insert ( for 19 mm wrench) in nickel plated brass, tightening nuts/bolt in stainless steel AISI 304.- Operation : by untightening the bolt, the position of the top can be adjusted. By untightening the knob, the position of the pin can be adjusted.- Max recommended tightening torque : 4 Kgm.- Packaging : 25 pieces.
Without lipWith lip
Part. 545Part. 544
Spacer Part. 545, see page 111.Applicable to Part. 544
• Accessories
Spacer Part. 227, see page 109. Applicable to Part. 544
Part. 543
M10 x 20
M10 x 30 M10 x 40
Part. 227 Code 62581page 109
Part. 227 Code 62581page 109
Part. 227 Code 61931page 109
Part. 545Part. 543
Spacer Part. 545, see page 111.Applicable to Part. 543
• Accessories
Spacer Part. 227, see page 109. Applicable to Part. 543
108 109
Conveyor Components Conveyor Components
*
*
2020
20
ø 30M10
ø 36
ø 30
ø 22
20
ø 36
46,5
4512
,5 m
ax
202,
564
38
21
2,5
d
ø 30ø 36
48
4845
15 m
ax 202,
5
ø 29,9
ø 15,3ø 16,5
43
22,5
4
d
d
d 9
38
ø 10,5ø 30
292,
5
ø 30ø 36
ø 10,5ø 30
292,
5
ø 30ø 36
Use code 62581when fitting 1 spacer.
Use just 1 spacer code 62581 and 1 or more spacers code 61931 when fitting more thanone spacer.
Part. 256
Part. 192
Part. 359
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Swivel head
Swivel head
Swivel head
0,10
Part. Code
Pin dia.d
mm
359
Weightkg
121416
68450168451164235
Material
Part. 255 Swivel head
Accessories Accessories
In stainless steel and brass
- Material : eyebolt in nickel plated brass.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,08
Part. Code
Pin dia.d
mm
255
Weightkg
121416
696706968059041
Material
- Material : tightening nut and eyebolt in stainless steel AISI 304.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,12
Part. Code
Pin dia.d
mm
256
Weightkg
121416
645616457164581
Material
- Material : tightening nut and eyebolt in stainless steel AISI 304.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,19
Part. CodeWeight
kg
5309160933
Material
* = The bearing head can be used with dia. 14 and dia. 16 mm pins.- Material : tightening bolt in stainless steel AISI 304.- Packaging : 50 pieces.
14 to 16192Stainless steel AISI 303Nickel plated brass
Pin dia.d
mm
• Assembly of Part. 255 Applicable to brackets Part. 193-540
Part. 193page 101
Part. 193page 101
Part. 183page 129
Part. 183page 129
Part. 185page 129
Part. 185page 129
Part. 540page 104
Part. 255-256-359
Part. 192
Part. 192
Part. 227 code 61931
Applicable 1 or more spacers
Part. 163-257-541-542-544
Part. 178-543
Part. 178-543
• Assembly of Part. 359 Applicable to brackets Part. 193-540
Part. 193page 101 Part. 540
page 104
M10 x 30
Part. 540page 104
Part. 193page 101
Part. 540page 104
M 10
M 10
M 10
M 10 x 30
M 10 x 20
M10 x 35
• Assembly of Part. 256 Applicable to brackets Part. 193-540 ( in combination with knob Part. 183).
• Assembly of Part. 192 Applicable to brackets Part. 193-540 ( in combination with knob Part. 185).
• Assembly of Part. 227 code 61931 - Applicable to adjustable brackets Part. 163-257-541- 542-544 and/or bearing heads Part. 255-256-359
• Assembly of Part. 227 code 62581 - Applicable to adjustable brackets Part. 178-543 and/or bearing heads Part. 192
Part. 227Spacer
0,01
Part. CodeWeight
kg
61931
Use
- Material : reinforced polyamide PA FV (black).- Packaging : 50 pieces.
227
With any adjustable bracket or bearing head
62581For adjustable brackets Part. 178-543or bearing head Part.192
Code : 61931 Code : 62581
Part. 227 Code 62581
Part. 227 Code 62581
Part. 227 Code 61931
108 109
Conveyor Components Conveyor Components
*
*
2020
20
ø 30M10
ø 36
ø 30
ø 22
20
ø 36
46,5
4512
,5 m
ax
202,
564
38
21
2,5
d
ø 30ø 36
48
4845
15 m
ax 202,
5
ø 29,9
ø 15,3ø 16,5
43
22,5
4
d
d
d 9
38
ø 10,5ø 30
292,
5
ø 30ø 36
ø 10,5ø 30
292,
5
ø 30ø 36
Use code 62581when fitting 1 spacer.
Use just 1 spacer code 62581 and 1 or more spacers code 61931 when fitting more thanone spacer.
Part. 256
Part. 192
Part. 359
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Swivel head
Swivel head
Swivel head
0,10
Part. Code
Pin dia.d
mm
359
Weightkg
121416
68450168451164235
Material
Part. 255 Swivel head
Accessories Accessories
In stainless steel and brass
- Material : eyebolt in nickel plated brass.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,08
Part. Code
Pin dia.d
mm
255
Weightkg
121416
696706968059041
Material
- Material : tightening nut and eyebolt in stainless steel AISI 304.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,12
Part. Code
Pin dia.d
mm
256
Weightkg
121416
645616457164581
Material
- Material : tightening nut and eyebolt in stainless steel AISI 304.- Packaging : 50 pieces.
Reinforced polyamide PA FV (black)
0,19
Part. CodeWeight
kg
5309160933
Material
* = The bearing head can be used with dia. 14 and dia. 16 mm pins.- Material : tightening bolt in stainless steel AISI 304.- Packaging : 50 pieces.
14 to 16192Stainless steel AISI 303Nickel plated brass
Pin dia.d
mm
• Assembly of Part. 255 Applicable to brackets Part. 193-540
Part. 193page 101
Part. 193page 101
Part. 183page 129
Part. 183page 129
Part. 185page 129
Part. 185page 129
Part. 540page 104
Part. 255-256-359
Part. 192
Part. 192
Part. 227 code 61931
Applicable 1 or more spacers
Part. 163-257-541-542-544
Part. 178-543
Part. 178-543
• Assembly of Part. 359 Applicable to brackets Part. 193-540
Part. 193page 101 Part. 540
page 104
M10 x 30
Part. 540page 104
Part. 193page 101
Part. 540page 104
M 10
M 10
M 10
M 10 x 30
M 10 x 20
M10 x 35
• Assembly of Part. 256 Applicable to brackets Part. 193-540 ( in combination with knob Part. 183).
• Assembly of Part. 192 Applicable to brackets Part. 193-540 ( in combination with knob Part. 185).
• Assembly of Part. 227 code 61931 - Applicable to adjustable brackets Part. 163-257-541- 542-544 and/or bearing heads Part. 255-256-359
• Assembly of Part. 227 code 62581 - Applicable to adjustable brackets Part. 178-543 and/or bearing heads Part. 192
Part. 227Spacer
0,01
Part. CodeWeight
kg
61931
Use
- Material : reinforced polyamide PA FV (black).- Packaging : 50 pieces.
227
With any adjustable bracket or bearing head
62581For adjustable brackets Part. 178-543or bearing head Part.192
Code : 61931 Code : 62581
Part. 227 Code 62581
Part. 227 Code 62581
Part. 227 Code 61931
110 111
Conveyor Components Conveyor Components
4215,2
599
,5
134
1510,5 15
10,5
415012
,55075
15 2 15 2
10,5
52
12,5
86111
15
18 2
ø 10
,5
15 15
15
4,5
4 4
3
Part. 61
Part. 142
Part. 545
Part. 96
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Spacer
Accessories Accessori
Spacer
Spacer
- Material : reinforced polyamide PA FV (black).- Packaging : 50 pieces.
0,04
Part. Code
6166194
50870
Weightkg
With lip
Without lip
Version
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,06
Part. Code
142 65870
Weightkg
Square washer
- Material : stainless steel AISI 304.- Packaging : 200 pieces.
Part. Code
96 51550
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,04
Part. Code
545683771683761
Weightkg
With lip
Without lip
Version
• Assembly of Part. 96
Applicable to Part. 72-81-88-89distributes force fromtightening over larger area.
• Assembly of Part. 61
Applicable to Part. 10-97-107
Advantages of version with lip :
Possibility of restingon side of conveyorframe.
Applicable with 1or more spacers
Applicable with 1or more spacers
Possibility of assemblingseveral spacers,all centred.
• Assembly of Part. 545
Applicable to Part. 540-541-542-543-544
Advantages of version with lip :
Possibility of restingon side of conveyorframe.
Applicable with 1or more spacers
Possibility of assemblingseveral spacers,all centred.
• Assembly of Part. 142
Applicable to Part. 72-89-140-163-178-193-257
• Assembly of drip tray support Part. 226-336, see page 112 Part. 61-142 permit application of drip tray support.
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 545 permit application of drip tray support.
Part. 226-336
Part. 72-8188-89
Without lipWith lip Without lipWith lip
Part. 10-97-107
Part. 72-89-140-
163-178-193-257
Part. 540-541-542-
543-544
110 111
Conveyor Components Conveyor Components
4215,2
599
,5
134
1510,5 15
10,5
415012
,55075
15 2 15 2
10,5
52
12,5
86111
15
18 2
ø 10
,5
15 15
15
4,5
4 4
3
Part. 61
Part. 142
Part. 545
Part. 96
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Spacer
Accessories Accessori
Spacer
Spacer
- Material : reinforced polyamide PA FV (black).- Packaging : 50 pieces.
0,04
Part. Code
6166194
50870
Weightkg
With lip
Without lip
Version
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,06
Part. Code
142 65870
Weightkg
Square washer
- Material : stainless steel AISI 304.- Packaging : 200 pieces.
Part. Code
96 51550
- Material : reinforced polyamide PA FV (black).- Packaging : 25 pieces.
0,04
Part. Code
545683771683761
Weightkg
With lip
Without lip
Version
• Assembly of Part. 96
Applicable to Part. 72-81-88-89distributes force fromtightening over larger area.
• Assembly of Part. 61
Applicable to Part. 10-97-107
Advantages of version with lip :
Possibility of restingon side of conveyorframe.
Applicable with 1or more spacers
Applicable with 1or more spacers
Possibility of assemblingseveral spacers,all centred.
• Assembly of Part. 545
Applicable to Part. 540-541-542-543-544
Advantages of version with lip :
Possibility of restingon side of conveyorframe.
Applicable with 1or more spacers
Possibility of assemblingseveral spacers,all centred.
• Assembly of Part. 142
Applicable to Part. 72-89-140-163-178-193-257
• Assembly of drip tray support Part. 226-336, see page 112 Part. 61-142 permit application of drip tray support.
Part. 226-336
• Assembly of drip tray support Part. 226-336, see page 112 Part. 545 permit application of drip tray support.
Part. 226-336
Part. 72-8188-89
Without lipWith lip Without lipWith lip
Part. 10-97-107
Part. 72-89-140-
163-178-193-257
Part. 540-541-542-
543-544
112 113
Conveyor Components Conveyor Components
35
A
ø 4
20° max
B
707
L1L
23,5
20° max
L
B
ø 4
23,5
13ø
40
23,5
ø 4
7,5
ø 30
Df
Self-tapping screw3,5 x 9,5 DIN 7981
Split versionavoid unwanteddisassemblyof the rod
Part. 226-336
Part. 338
20° (maximum angle of inclination of drip tray)
3 max
A
EFrame width
H
9 m
ax
30 m
in
0,5÷
1
R 3 max
Drip tray width
Drip tray width = Frame width + 2• (A - E)
E = 10 mm for Part. 226 (standard) 9,2 mm forr Part. 336 (split )
A = see table with codes
35
Part. 226 (standard)
Part. 336 ( split )
Part. 226 (standard)
Part. 336 ( split )
Part. 338
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Mounting platePart. 226 - 336
Part. 226 - 336
Drip tray support
Accessories Accessories
0,06
0,06
Code
Weightkg
HeightL
mmA
mmPart. 226Standard
Part. 336Split
Bmm
180
200230310
L1mm
103
123
153233
1417272757
3535355050
38 35
64631N27 35647551N18 35
Drip tray support
697801N68299N
- Material : body in reinforced polypropylene PP FV (black), support element in stainless steel AISI 304, self-tapping screw (only for Part. 336) in stainless steel.- Packaging : 100 pieces.
Code
Weightkg
HeightL
mmPart. 226Standard
Part. 336Split
Bmm
697811200 6176735
- Material : body in reinforced polypropylene PP FV (black), support element in stainless steel AISI 304, self-tapping screw (only for Part. 336) in stainless steel.- Packaging : 100 pieces.
• Assembly of Part. 226 (standard) • Assembly of Part. 338
• Assembly of Part. 336 (split )
• Drip tray design
Bent rod
Straight rod
Bracket Part.
81-8872-898510-97107599140617163-193-178-257540-541-542-543-544
70102,553717210410695103,5123
Rod slot lengthH
mm
- Material : plate in reinforced polyamide (black), washer in stainless steel AISI 304.- Packaging : 100 pieces.
0,20
Part. Code
Bore dia.Df
mm
910,5338 67563
67325
Weightkg
67305N66772N62071N67319N641461N*64681N*
697761N66823N60574N*697771N697781N*697791N*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
112 113
Conveyor Components Conveyor Components
35
A
ø 4
20° max
B
707
L1L
23,5
20° max
L
B
ø 4
23,5
13ø
40
23,5
ø 4
7,5
ø 30
Df
Self-tapping screw3,5 x 9,5 DIN 7981
Split versionavoid unwanteddisassemblyof the rod
Part. 226-336
Part. 338
20° (maximum angle of inclination of drip tray)
3 max
A
EFrame width
H
9 m
ax
30 m
in
0,5÷
1
R 3 max
Drip tray width
Drip tray width = Frame width + 2• (A - E)
E = 10 mm for Part. 226 (standard) 9,2 mm forr Part. 336 (split )
A = see table with codes
35
Part. 226 (standard)
Part. 336 ( split )
Part. 226 (standard)
Part. 336 ( split )
Part. 338
GUIDE RAIL BRACKETS GUIDE RAIL BRACKETS
Mounting platePart. 226 - 336
Part. 226 - 336
Drip tray support
Accessories Accessories
0,06
0,06
Code
Weightkg
HeightL
mmA
mmPart. 226Standard
Part. 336Split
Bmm
180
200230310
L1mm
103
123
153233
1417272757
3535355050
38 35
64631N27 35647551N18 35
Drip tray support
697801N68299N
- Material : body in reinforced polypropylene PP FV (black), support element in stainless steel AISI 304, self-tapping screw (only for Part. 336) in stainless steel.- Packaging : 100 pieces.
Code
Weightkg
HeightL
mmPart. 226Standard
Part. 336Split
Bmm
697811200 6176735
- Material : body in reinforced polypropylene PP FV (black), support element in stainless steel AISI 304, self-tapping screw (only for Part. 336) in stainless steel.- Packaging : 100 pieces.
• Assembly of Part. 226 (standard) • Assembly of Part. 338
• Assembly of Part. 336 (split )
• Drip tray design
Bent rod
Straight rod
Bracket Part.
81-8872-898510-97107599140617163-193-178-257540-541-542-543-544
70102,553717210410695103,5123
Rod slot lengthH
mm
- Material : plate in reinforced polyamide (black), washer in stainless steel AISI 304.- Packaging : 100 pieces.
0,20
Part. Code
Bore dia.Df
mm
910,5338 67563
67325
Weightkg
67305N66772N62071N67319N641461N*64681N*
697761N66823N60574N*697771N697781N*697791N*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
114 115
Conveyor Components Conveyor Components
2573
29,5
2229,5
3
d1d2
1821
21
16
B
B
d d
53
2
M6
M5
2573
29,5
2229,5
3
dB M6
P
100
P
100
A
P
100
Part. 340 Part. 174 Q
Part. 174-174 R
CONNECTING CLAMPS CONNECTING CLAMPS
Cross clamp Cross clamp
Cross clamp
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
340
683736838567375
Zinc plated steel
Material
Reinforced polyamide PA FV (black)
Reinforced polyamide PA FV special (black)
101214
SquarerodB
mm
81012
81012
627031627041627051
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
0,07
0,07
Part. Code
Rod dia.d1mm
14
174
174R
5794159291*5930159311
15
Rod dia.d2mm
14151618
151618
16 1618
5378159341
1518
1518
6188764997
18 18 53771
Weightkg
- Material : tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 1 Kgm (Part. 174); 1,5 Kgm (Part. 174 R).- Packaging : 50 pieces.
0,07
Part. Code
SquarerodB
mm
12174 Q
Rod dia.d
mm
14151618
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 1 Kgm.- Packaging : 50 pieces.
• Deflection of Part. 340
• Technical data Part. 340 - sliding load : 1200 N - rotation load : 5 N/m
Tests performed at tightening torque : 0,5 Kgm
• Technical data Part. 174 - sliding load : 2500 N (with d = 14-15-16) 2800 N (with d = 18) - rotation load : 13 N/m
Tests performed at tightening torque : 1 Kgm
• Technical data Part. 174 Q - sliding load : 2500 N (with d = 14-15-16) 2800 N (with d = 18) - rotation load : 13 N/m
Tests performed at tightening torque : 1 Kgm
• Characteristics of Part. 174 R
It differs from Part. 174 in the use of a special material and a stiffening bush (spacer).
• Assembly of Part. 174-174 R with ratchet handle
• Technical data Part. 174 R - sliding load : 3500 N - rotation load : 25 N/m
Tests performed at tightening torque : 1,5 Kgm
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
5
10
20
15
Assembly of round andsquare rods
Part. 174-174R
Part. 303
• Deflection of Part. 174-174R
Load P (Newton)
Defle
ctio
n (m
m)
900600 1200 1500300
0,5
1
543
2
The spacers A (nickel platedbrass) prevent breakage of clampWhen bolts are tightened higherthen max. recommended values.The resulting loads are absorbedby the spacers and not the body.
The increased elasticity of thematerial permits, once the boltsare untightened, the clamp toslide easily over the rod.Especially suitetable forapplications with frequentadjustment.
Can be applied with theratched handle Part. 303(code 60922) instead ofthe standard hardware, see page 128.
• Assembly of Part. 174 Q with ratchet handle
Part. 174 Q
Part. 303
Can be applied with theratched handle Part. 303(code 60922) instead ofthe standard hardware, see page 128.
Part. 174 (d=15)
Part. 174R (d=15)
• Deflection of Part. 174Q
Load P (Newton)
Defle
ctio
n (m
m)
900600 1200 1500300
0,5
1
543
2
d = 10
d = 15
5379159321*59331
5935159361*5937159381
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
114 115
Conveyor Components Conveyor Components
2573
29,5
2229,5
3
d1d2
1821
21
16
B
B
d d
53
2
M6
M5
2573
29,5
2229,5
3
dB M6
P
100
P
100
A
P
100
Part. 340 Part. 174 Q
Part. 174-174 R
CONNECTING CLAMPS CONNECTING CLAMPS
Cross clamp Cross clamp
Cross clamp
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
340
683736838567375
Zinc plated steel
Material
Reinforced polyamide PA FV (black)
Reinforced polyamide PA FV special (black)
101214
SquarerodB
mm
81012
81012
627031627041627051
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
0,07
0,07
Part. Code
Rod dia.d1mm
14
174
174R
5794159291*5930159311
15
Rod dia.d2mm
14151618
151618
16 1618
5378159341
1518
1518
6188764997
18 18 53771
Weightkg
- Material : tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 1 Kgm (Part. 174); 1,5 Kgm (Part. 174 R).- Packaging : 50 pieces.
0,07
Part. Code
SquarerodB
mm
12174 Q
Rod dia.d
mm
14151618
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 1 Kgm.- Packaging : 50 pieces.
• Deflection of Part. 340
• Technical data Part. 340 - sliding load : 1200 N - rotation load : 5 N/m
Tests performed at tightening torque : 0,5 Kgm
• Technical data Part. 174 - sliding load : 2500 N (with d = 14-15-16) 2800 N (with d = 18) - rotation load : 13 N/m
Tests performed at tightening torque : 1 Kgm
• Technical data Part. 174 Q - sliding load : 2500 N (with d = 14-15-16) 2800 N (with d = 18) - rotation load : 13 N/m
Tests performed at tightening torque : 1 Kgm
• Characteristics of Part. 174 R
It differs from Part. 174 in the use of a special material and a stiffening bush (spacer).
• Assembly of Part. 174-174 R with ratchet handle
• Technical data Part. 174 R - sliding load : 3500 N - rotation load : 25 N/m
Tests performed at tightening torque : 1,5 Kgm
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
5
10
20
15
Assembly of round andsquare rods
Part. 174-174R
Part. 303
• Deflection of Part. 174-174R
Load P (Newton)
Defle
ctio
n (m
m)
900600 1200 1500300
0,5
1
543
2
The spacers A (nickel platedbrass) prevent breakage of clampWhen bolts are tightened higherthen max. recommended values.The resulting loads are absorbedby the spacers and not the body.
The increased elasticity of thematerial permits, once the boltsare untightened, the clamp toslide easily over the rod.Especially suitetable forapplications with frequentadjustment.
Can be applied with theratched handle Part. 303(code 60922) instead ofthe standard hardware, see page 128.
• Assembly of Part. 174 Q with ratchet handle
Part. 174 Q
Part. 303
Can be applied with theratched handle Part. 303(code 60922) instead ofthe standard hardware, see page 128.
Part. 174 (d=15)
Part. 174R (d=15)
• Deflection of Part. 174Q
Load P (Newton)
Defle
ctio
n (m
m)
900600 1200 1500300
0,5
1
543
2
d = 10
d = 15
5379159321*59331
5935159361*5937159381
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
116 117
Conveyor Components Conveyor Components
40
55
d
B
75
30
ø 13,5
ø 8,5
4,5
14,527
52
M6
4056
3012
20
38,5
21
ø6,5
5,5
ø10,5
Bd
M5
P
100
P
100
3045
105
d1
B
4164
33
60
M8
M8
3045
105d1
d
4164
33
60
M8
M8Part. 587
Part. 587
CONNECTING CLAMPS CONNECTING CLAMPS
Cross clamp
Round bore
Square bore
Cross clamp
0,18
Part. Code
42,4 (1" 1/4)587 56941N
Rod dia.d1mm
Tube dia.d
mm
15
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 2 Kgm.- Packaging : 100 pezzi.
0,18
Part. Code
40x40587 56951N
Rod dia.d1mm
Squaretube
Bmm
20
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 2 Kgm.- Packaging : 100 pezzi.
• Technical data Part. 339 - sliding load : 650 N - rotation load : 5 N/m
Tests performed at tightening torque : 0,5 Kgm
• Technical data Part. 595 - sliding load : 600 N (with d = 16) 500 N (with d = 18-20)
Tests performed at tightening torque : 1,5 Kgm
Assembly of round andsquare rods
Assembly of round andsquare rods
• Deflection of Part. 595
• Assembly of Part. 595
Can be used in combination with Part. 174-174 R-174 Q
d = 10
Part. 339
Part. 595 T-clamp
0,07
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
161820
595
610432610442610452
Zinc plated steel161820
SquarerodB
mm
141618
141618
610462610472610482
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 1,5 Kgm.- Packaging : 50 pieces.
T-clamp
0,03
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
339
683636837567365
Zinc plated steel101214
SquarerodB
mm
81012
81012
626001627011627021
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
• Deflection of Part. 339
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
1
2
5
4
3
Part. 595
Part. 174-174 R-174 Q
Part. 587A
View from A
Part. 587
Part. 198
Electrical wire pipe
Part. 557Part. 580
Part. 617
Part. 199
Part. 409
Part. 59240 mm40 mm
ø 20 mm
ø 20
ø 48,3 mm
ø 15 mm
Tube 40x40
• Use of Part. 587 ( for square tubes)
• Chracteristics of Part. 587 The stiffness of Part. 587 makes them suitable for wide multistrand conveyors.
• Use of Part. 587 ( for round tubes)
ø 42,4 mm
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
1
2
5
4
3
• Assembly of Part. 339
Can be used in combination with Part. 340
Part. 340
Part. 339
116 117
Conveyor Components Conveyor Components
40
55
d
B
75
30
ø 13,5
ø 8,5
4,5
14,527
52
M6
4056
3012
20
38,5
21
ø6,5
5,5
ø10,5
Bd
M5
P
100
P
100
3045
105
d1
B
4164
33
60
M8
M8
3045
105d1
d
4164
33
60
M8
M8Part. 587
Part. 587
CONNECTING CLAMPS CONNECTING CLAMPS
Cross clamp
Round bore
Square bore
Cross clamp
0,18
Part. Code
42,4 (1" 1/4)587 56941N
Rod dia.d1mm
Tube dia.d
mm
15
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 2 Kgm.- Packaging : 100 pezzi.
0,18
Part. Code
40x40587 56951N
Rod dia.d1mm
Squaretube
Bmm
20
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 2 Kgm.- Packaging : 100 pezzi.
• Technical data Part. 339 - sliding load : 650 N - rotation load : 5 N/m
Tests performed at tightening torque : 0,5 Kgm
• Technical data Part. 595 - sliding load : 600 N (with d = 16) 500 N (with d = 18-20)
Tests performed at tightening torque : 1,5 Kgm
Assembly of round andsquare rods
Assembly of round andsquare rods
• Deflection of Part. 595
• Assembly of Part. 595
Can be used in combination with Part. 174-174 R-174 Q
d = 10
Part. 339
Part. 595 T-clamp
0,07
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
161820
595
610432610442610452
Zinc plated steel161820
SquarerodB
mm
141618
141618
610462610472610482
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 1,5 Kgm.- Packaging : 50 pieces.
T-clamp
0,03
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
339
683636837567365
Zinc plated steel101214
SquarerodB
mm
81012
81012
626001627011627021
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
• Deflection of Part. 339
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
1
2
5
4
3
Part. 595
Part. 174-174 R-174 Q
Part. 587A
View from A
Part. 587
Part. 198
Electrical wire pipe
Part. 557Part. 580
Part. 617
Part. 199
Part. 409
Part. 59240 mm40 mm
ø 20 mm
ø 20
ø 48,3 mm
ø 15 mm
Tube 40x40
• Use of Part. 587 ( for square tubes)
• Chracteristics of Part. 587 The stiffness of Part. 587 makes them suitable for wide multistrand conveyors.
• Use of Part. 587 ( for round tubes)
ø 42,4 mm
Load P (Newton)
Defle
ctio
n (m
m)
400300 500 600200
1
2
5
4
3
• Assembly of Part. 339
Can be used in combination with Part. 340
Part. 340
Part. 339
118 119
Conveyor Components Conveyor Components
58,5
308
14,5
15 25
14
ø6ø8
21
Bd
0,5
58,5
308
ø 10
25
14
21
Bd
18,5
19
R 15
150
M5
M5
150
ø 19
Components1 - T-clamp Part. 3392 - Cross clamp Part. 3403 - Clamp Part. 3414 - Connecting tube Part. 3445 - Closing cap Part. 343
1
2 3 4 5
40
Part. 341 C
Part. 343-344
CONNECTING CLAMPS CONNECTING CLAMPS
Clamp for reflectors
Connecting tube ø 10 x 1/Closing cap
0,23
Part. Material Code
Stainless steel AISI 304344 - Tube 69713
–Polypropylene (black)343 - Cap 69703
Weightkg/m
- State of supply for Part. 344 : bars of 3 metres.- Packaging : 30 metres (Part. 344), 200 pieces (Part. 343) .
• Assembly of Part. 342
Dia. 18 mm photocells or sensors
• Assembly of Part. 341 C
• Assembly of Part. 341
Dia. 18 mm photocells or sensors
Part. 342
Part. 341 Clamp for photocells or sensors
Assembly kit for photocells or sensors
0,14
Part. Code
342 68923
Weightkg
- Material : clamps in reinforced polyamide PA FV (black), tightening bolt and connecting tubes in stainless steel AISI 304, closing caps in polypropylene.- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 Kit.
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
341 C
672156912569135
Zinc plated steel101214
SquarerodB
mm
81012
81012
627091627101627111
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
Part. 340Part. 341C
Kit Part. 342
Part. 339
Part. 343Part. 344
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
341
683836839567385
Zinc plated steel101214
SquarerodB
mm
81012
81012
627061627071627081
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
Assembly of round andsquare rods
Types of reflectors that can be mounted :
Reflector with clip-onfixing pin: press-fitbetween. clip andclamp hole.
The beam of light emitted bysource E is reflected byreflector C and conveyed toreceiver R. Reading isperformed through interruption of the beam of light.
Reflector
Reflection-typephotocell
The clamp can also bedrilled to hold dia. 8-10-12-14 mm photocells or sensors.
Part. 341
Part. 340
Part. 341 C
Part. 341 C
Part. 341
• Operating principle
• Assembly of photocells or sensors
Assembly of round andsquare rods
118 119
Conveyor Components Conveyor Components
58,5
308
14,5
15 25
14
ø6ø8
21
Bd
0,5
58,5
308
ø 10
25
14
21
Bd
18,5
19
R 15
150
M5
M5
150
ø 19
Components1 - T-clamp Part. 3392 - Cross clamp Part. 3403 - Clamp Part. 3414 - Connecting tube Part. 3445 - Closing cap Part. 343
1
2 3 4 5
40
Part. 341 C
Part. 343-344
CONNECTING CLAMPS CONNECTING CLAMPS
Clamp for reflectors
Connecting tube ø 10 x 1/Closing cap
0,23
Part. Material Code
Stainless steel AISI 304344 - Tube 69713
–Polypropylene (black)343 - Cap 69703
Weightkg/m
- State of supply for Part. 344 : bars of 3 metres.- Packaging : 30 metres (Part. 344), 200 pieces (Part. 343) .
• Assembly of Part. 342
Dia. 18 mm photocells or sensors
• Assembly of Part. 341 C
• Assembly of Part. 341
Dia. 18 mm photocells or sensors
Part. 342
Part. 341 Clamp for photocells or sensors
Assembly kit for photocells or sensors
0,14
Part. Code
342 68923
Weightkg
- Material : clamps in reinforced polyamide PA FV (black), tightening bolt and connecting tubes in stainless steel AISI 304, closing caps in polypropylene.- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 Kit.
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
341 C
672156912569135
Zinc plated steel101214
SquarerodB
mm
81012
81012
627091627101627111
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
Part. 340Part. 341C
Kit Part. 342
Part. 339
Part. 343Part. 344
0,02
Part.Tighteningbolt material
Stainless steel AISI 304
Code
Rod dia.d
mm
101214
341
683836839567385
Zinc plated steel101214
SquarerodB
mm
81012
81012
627061627071627081
Weightkg
- Material : clamp in reinforced polyamide PA FV (black).- Max recommended tightening torque : 0,5 Kgm.- Packaging : 50 pieces.
Assembly of round andsquare rods
Types of reflectors that can be mounted :
Reflector with clip-onfixing pin: press-fitbetween. clip andclamp hole.
The beam of light emitted bysource E is reflected byreflector C and conveyed toreceiver R. Reading isperformed through interruption of the beam of light.
Reflector
Reflection-typephotocell
The clamp can also bedrilled to hold dia. 8-10-12-14 mm photocells or sensors.
Part. 341
Part. 340
Part. 341 C
Part. 341 C
Part. 341
• Operating principle
• Assembly of photocells or sensors
Assembly of round andsquare rods
120 121
Conveyor Components Conveyor Components
23,5
74,5
1787
7,5
30
2,5
60
35
166,5
34
182,5
45°
Metal insert
1) With hole (no insert ).
2) With hole and metal insert ( for magnetic sensor ).
2) Without hole
Magnetic proximity sensor
Magnetic insert
Magnetic proximity sensor
Magnetic proximity sensor
Magnetic insert
74,5
7
25 24,5
56
34,5
24,5 d25,5
33,5
74,5
7
66
74,5
7
14,5 24,5
ø18
ø20
ø20,5
2,52,5
2,5
30
ø18
= =34
1519
60
35
A
AB
B
Hole for magnetic insert
Shaft fixing
hole
Sec A-A
Sec A-A
Sec A-A
Sec B-B
Grub screwM 6
Part. 518
CONNECTING CLAMPS CONNECTING CLAMPS
Control contact lever
0,1
Part. Version Code
With hole (no insert )
518
642941N
Without hole 696021N
With hole and metal insert 642951N
Weightkg
- Material : lever in polypropylene (black), insert ( for magnetic sensor ) in stainless steel AISI 430, locking spacer ( for shaft fixing) in zinc plated steel.- Packaging: 50 pieces.
• Assembly of Part. 372
• Suitable photocell types
• Suitable reflector types
• Assembly of Part. 518 (with insert for magnetic sensor )
• Use Contact lever ideal to mechanically check the presence of products. Works in conjuction with photocells or magnetic sensor (proximity sensor).
• Versions The control contact lever is supplied in three versions according to the type of sensor to be used.
• Assembly on the shaft The control contact lever can be axially fixed on the shaft with a metal collar and a grub screw.
Part. 372 Universal clamp for photocells or reflectors
0,12
Part. Code
Rod dia.d
mm
1415161820
372
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- State of supply : already assembled in position A- Max recommended tightening torque : 1,5 Kgm.- Packaging : 50 pieces.
In case of problem (example bottle downing) the control contact lever lowers and magnetic sensor detects the presence of magnetic insert and stops the conveyor.
In regular conditions the control contact lever is high and magnetic proximity sensor does not detect the presence of magnetic insert.
- Leuze / Rk 18
Square section
Self-tappingscrew
- Omron / E3S - R
- Omron / E3A2
Diell / RL 110 Sicest / RF - 230 Diell / RL 113Datalogic / R2
- Sick / WL 36
- Datalogic / RT 7
Part. 174
Part. 178
Pos. A
Pos. B Pos. C
- Flange dimension
- Can be fitted in positions A - B - C
6178661796618066181661826*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
120 121
Conveyor Components Conveyor Components
23,5
74,5
1787
7,5
30
2,5
60
35
166,5
34
182,5
45°
Metal insert
1) With hole (no insert ).
2) With hole and metal insert ( for magnetic sensor ).
2) Without hole
Magnetic proximity sensor
Magnetic insert
Magnetic proximity sensor
Magnetic proximity sensor
Magnetic insert
74,5
7
25 24,5
56
34,5
24,5 d25,5
33,5
74,5
7
66
74,5
7
14,5 24,5
ø18
ø20
ø20,5
2,52,5
2,5
30
ø18
= =34
1519
60
35
A
AB
B
Hole for magnetic insert
Shaft fixing
hole
Sec A-A
Sec A-A
Sec A-A
Sec B-B
Grub screwM 6
Part. 518
CONNECTING CLAMPS CONNECTING CLAMPS
Control contact lever
0,1
Part. Version Code
With hole (no insert )
518
642941N
Without hole 696021N
With hole and metal insert 642951N
Weightkg
- Material : lever in polypropylene (black), insert ( for magnetic sensor ) in stainless steel AISI 430, locking spacer ( for shaft fixing) in zinc plated steel.- Packaging: 50 pieces.
• Assembly of Part. 372
• Suitable photocell types
• Suitable reflector types
• Assembly of Part. 518 (with insert for magnetic sensor )
• Use Contact lever ideal to mechanically check the presence of products. Works in conjuction with photocells or magnetic sensor (proximity sensor).
• Versions The control contact lever is supplied in three versions according to the type of sensor to be used.
• Assembly on the shaft The control contact lever can be axially fixed on the shaft with a metal collar and a grub screw.
Part. 372 Universal clamp for photocells or reflectors
0,12
Part. Code
Rod dia.d
mm
1415161820
372
Weightkg
- Material : clamp in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- State of supply : already assembled in position A- Max recommended tightening torque : 1,5 Kgm.- Packaging : 50 pieces.
In case of problem (example bottle downing) the control contact lever lowers and magnetic sensor detects the presence of magnetic insert and stops the conveyor.
In regular conditions the control contact lever is high and magnetic proximity sensor does not detect the presence of magnetic insert.
- Leuze / Rk 18
Square section
Self-tappingscrew
- Omron / E3S - R
- Omron / E3A2
Diell / RL 110 Sicest / RF - 230 Diell / RL 113Datalogic / R2
- Sick / WL 36
- Datalogic / RT 7
Part. 174
Part. 178
Pos. A
Pos. B Pos. C
- Flange dimension
- Can be fitted in positions A - B - C
6178661796618066181661826*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
122 123
Conveyor Components Conveyor Components
Part. 185 - Page 129 Tightening knob.
Part. 16 - Page 132 Roller.
Part. 76 - Page 132 Roller.
Part. 272 - Page 126 Lock.
Part. 302 - Page 127 Ratchet handle clamping.
Part. 567 - Page 130 End transfer module (with lip ).
Part. 63-95 - Page. 133 Rollers.
Part. 79 - Page 134 Winding tensioner.
Part. 303 - Page 127Ratchet handle clamping.
Part. 569 - Page 130 End transfer module.
Part. 363 - Page 133 Roller.
Part. 75 - Page 134 Winding tensioner.
Part. 182 - Page 128 Tightening knob.
Part. 568 - Page 130 Centre transfer module.
Part. 455 - Page 133 Roller.
Part. 183 - Pag. 128Tightening knob.
Part. 20-21 - Page 132 Rollers.
MISCELLANEOUS COMPONENTS MISCELLANEOUS COMPONENTS
Part. 19 - Page 135Nozzle conical shape.Jet shape : conical.
Part. 612 - Page 137 Split shaft collars for sprocketsand rollers.
Part. 18 - Page 135 Nozzle shell shape.Jet shape : flat.
Part. 112 - Page 136Cable carriage chain.
Part. 114 - Page 136 Attacchments.
HINGES
LOCKS
TIGHTENINGELEMENTS
SLIDINGROLLERS
WINDINGTENSIONERS
NOZZLES
CABLECARRIAGECHAINS
SPLITSHAFTCOLLARS
Part. 337 - Page 124180° hinge.
Part. 260 - Page 124180° hinge.
Part. 260 - Page 125180° hinge for misallignedmounting surfaces.
122 123
Conveyor Components Conveyor Components
Part. 185 - Page 129 Tightening knob.
Part. 16 - Page 132 Roller.
Part. 76 - Page 132 Roller.
Part. 272 - Page 126 Lock.
Part. 302 - Page 127 Ratchet handle clamping.
Part. 567 - Page 130 End transfer module (with lip ).
Part. 63-95 - Page. 133 Rollers.
Part. 79 - Page 134 Winding tensioner.
Part. 303 - Page 127Ratchet handle clamping.
Part. 569 - Page 130 End transfer module.
Part. 363 - Page 133 Roller.
Part. 75 - Page 134 Winding tensioner.
Part. 182 - Page 128 Tightening knob.
Part. 568 - Page 130 Centre transfer module.
Part. 455 - Page 133 Roller.
Part. 183 - Pag. 128Tightening knob.
Part. 20-21 - Page 132 Rollers.
MISCELLANEOUS COMPONENTS MISCELLANEOUS COMPONENTS
Part. 19 - Page 135Nozzle conical shape.Jet shape : conical.
Part. 612 - Page 137 Split shaft collars for sprocketsand rollers.
Part. 18 - Page 135 Nozzle shell shape.Jet shape : flat.
Part. 112 - Page 136Cable carriage chain.
Part. 114 - Page 136 Attacchments.
HINGES
LOCKS
TIGHTENINGELEMENTS
SLIDINGROLLERS
WINDINGTENSIONERS
NOZZLES
CABLECARRIAGECHAINS
SPLITSHAFTCOLLARS
Part. 337 - Page 124180° hinge.
Part. 260 - Page 124180° hinge.
Part. 260 - Page 125180° hinge for misallignedmounting surfaces.
124 125
Conveyor Components Conveyor Components
30 1020
P
50
4670
Df
6O
G
F E
P
Df
O
L
6
180°
170°
49,580
22
35
6
Df
O
72,5
102
18 P
11,5
6,5
30
170°
6,5
49,580
72,5
102
Part. 337
Part. 260
Part. 260
HINGES HINGES
180° hinge
180° hinge
180° hinge
For misalligned mounting surfaces
110
Emm
11,5
130
11,5
18
11,5
18
23,5
30
Pmm
68
68
Lmm
35
22
Weightgr
PackagingNo. of pieces
20
Fmm
Gmm
Df dia.mm
6,58,5
6,58,5
Omm
10,513,5
10,513,3
Fixing screws dia.
M 6M 8
M 6M 8M 6M 8
Part.
260
6502166546
6501166556
Weightgr
PackagingNo. of pieces
24556,58,5
0mm
10,513,5
Pmm
64
Fixing screws dia.
M 6M 8
Part.
337
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 430 F.- Max recommended tightening torque : 0,5 Kgm.
6702360334
Df dia.mm
Weightgr
PackagingNo. of pieces
201206,58,5
0mm
10,513,5
Pmm
68
Fixing screws dia.
M 6M 8
Part.
260
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 303.- Max recommended tightening torque : 0,5 Kgm (with M6 screws), 1 Kgm (with M8 screws) .
Df dia.mm
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 303.- Max recommended tightening torque : 0,5 Kgm (with M6 screws), 1 Kgm (with M8 screws) .
Code
Code
Code
6503166566*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
124 125
Conveyor Components Conveyor Components
30 1020
P
50
4670
Df
6O
G
F E
P
Df
O
L
6
180°
170°
49,580
22
35
6
Df
O
72,5
102
18 P
11,5
6,5
30
170°
6,5
49,580
72,5
102
Part. 337
Part. 260
Part. 260
HINGES HINGES
180° hinge
180° hinge
180° hinge
For misalligned mounting surfaces
110
Emm
11,5
130
11,5
18
11,5
18
23,5
30
Pmm
68
68
Lmm
35
22
Weightgr
PackagingNo. of pieces
20
Fmm
Gmm
Df dia.mm
6,58,5
6,58,5
Omm
10,513,5
10,513,3
Fixing screws dia.
M 6M 8
M 6M 8M 6M 8
Part.
260
6502166546
6501166556
Weightgr
PackagingNo. of pieces
24556,58,5
0mm
10,513,5
Pmm
64
Fixing screws dia.
M 6M 8
Part.
337
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 430 F.- Max recommended tightening torque : 0,5 Kgm.
6702360334
Df dia.mm
Weightgr
PackagingNo. of pieces
201206,58,5
0mm
10,513,5
Pmm
68
Fixing screws dia.
M 6M 8
Part.
260
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 303.- Max recommended tightening torque : 0,5 Kgm (with M6 screws), 1 Kgm (with M8 screws) .
Df dia.mm
- Material : hinge in polyamide PA (black). Pin in stainless steel AISI 303.- Max recommended tightening torque : 0,5 Kgm (with M6 screws), 1 Kgm (with M8 screws) .
Code
Code
Code
6503166566*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
126 127
Conveyor Components Conveyor Components
ø 50,518
H20
Wre
nch
46 16
H1
1,5
÷ 10
45
26
ø 24,5
Drillingtemplate
Assemblydrawing No. 1
H = 31 min = 36 max
H1 = 23 min = 28 max
Assemblydrawing No. 2
A
B
CE
H
ø d
Db
De
30°
A
B
C
H 30°
L
ø d
Db
De
Part. 272
LOCKS TIGHTENING ELEMENTS
Lock• Assembly of Part. 272
• Fig. 1
Part. 272
1- Machine structure.2- Hinge Part. 260-337.3- Door.4- Lock Part. 272 ( in closed position).5- Lock Part. 272 ( in open position).6- Lock key (with exagonal 10 wrench).7- Hinge Part. 260 ( for misalligned mounting surfaces).
Part. 260-337
WeightKg
0,2
Part.
272 66771
- Material : body in reinforced polyamide PA FV (black), bolts, nuts and spring in stainless steel AISI 304.- Use : closure of doors in machines for foodindustry (washing, bottling, etc).- Packaging : 10 pieces.- Operation with hexagonal bar 10 key.- Key turn : 360° right or left.- Assembly instructions : Assembly lock as shown in assembly diagram 1, when the size X (Fig. 1) is suitable for assembly distance between 31÷36 mm. When X (Fig. 1) is between 23÷28 mm, follow assembly type 2.
Code
Part. 302
Part. 303Ratchet handle clamping
Ratchet handle clamping
Bore dia.d
M 6M 8M 10
Amm
405579
Bmm
405167
Cmm
7911
Emm
121420
Hmm
293648
Dbmm
111420
Demm
162028
Part.
302609026086260962
- Material : handle in reinforced polyamide in PA FV (black), Threaded insert in nickel plated brass.- Packaging : with d = M 6 and M 8 (100 pieces). with d = M 10 (50 pieces).
Code
Spindle dia.d
M 6M 8M 10
Amm
405579
Bmm
405167
Cmm
7911
Lmm
202530
Hmm
293648
Dbmm
111420
Demm
162028
Part.
303609226087260942
- Material : handle in reinforced polyamide in PA FV (black), spindle in stainless steel AISI 303.- Packaging : with d = M 6 and M 8 (100 pieces). with d = M 10 (50 pieces).
Code
126 127
Conveyor Components Conveyor Components
ø 50,5
18H
20
Wre
nch
46 16
H1
1,5
÷ 10
45
26
ø 24,5
Drillingtemplate
Assemblydrawing No. 1
H = 31 min = 36 max
H1 = 23 min = 28 max
Assemblydrawing No. 2
A
B
CE
H
ø d
Db
De
30°
A
B
C
H 30°
L
ø d
Db
De
Part. 272
LOCKS TIGHTENING ELEMENTS
Lock• Assembly of Part. 272
• Fig. 1
Part. 272
1- Machine structure.2- Hinge Part. 260-337.3- Door.4- Lock Part. 272 ( in closed position).5- Lock Part. 272 ( in open position).6- Lock key (with exagonal 10 wrench).7- Hinge Part. 260 ( for misalligned mounting surfaces).
Part. 260-337
WeightKg
0,2
Part.
272 66771
- Material : body in reinforced polyamide PA FV (black), bolts, nuts and spring in stainless steel AISI 304.- Use : closure of doors in machines for foodindustry (washing, bottling, etc).- Packaging : 10 pieces.- Operation with hexagonal bar 10 key.- Key turn : 360° right or left.- Assembly instructions : Assembly lock as shown in assembly diagram 1, when the size X (Fig. 1) is suitable for assembly distance between 31÷36 mm. When X (Fig. 1) is between 23÷28 mm, follow assembly type 2.
Code
Part. 302
Part. 303Ratchet handle clamping
Ratchet handle clamping
Bore dia.d
M 6M 8M 10
Amm
405579
Bmm
405167
Cmm
7911
Emm
121420
Hmm
293648
Dbmm
111420
Demm
162028
Part.
302609026086260962
- Material : handle in reinforced polyamide in PA FV (black), Threaded insert in nickel plated brass.- Packaging : with d = M 6 and M 8 (100 pieces). with d = M 10 (50 pieces).
Code
Spindle dia.d
M 6M 8M 10
Amm
405579
Bmm
405167
Cmm
7911
Lmm
202530
Hmm
293648
Dbmm
111420
Demm
162028
Part.
303609226087260942
- Material : handle in reinforced polyamide in PA FV (black), spindle in stainless steel AISI 303.- Packaging : with d = M 6 and M 8 (100 pieces). with d = M 10 (50 pieces).
Code
128 129
Conveyor Components Conveyor Components
Wrench 19
151040
53
28
ø 27
,5
M10
45,5
181040
Wrench 19
50
28
ø 23
M10
45,5
151011 461
53
M10
ø 27
,5ø
15
Wrench 19
Part. 182
Part. 183
Part. 185
TIGHTENING ELEMENTS TIGHTENING ELEMENTS
Tightening knob
Tightening knob
Tightening knob
Part.
183 54921
- Material : knob in reinforced polyamide PA FV (black) , threaded insert in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code
Part.
182 54911
- Material : knob in reinforced polyamide PA FV (black) , threaded insert in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code Part.
185 53081
- Material : knob in reinforced polyamide PA FV (black) , spindle in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code
128 129
Conveyor Components Conveyor Components
Wrench 19
151040
53
28
ø 27
,5
M10
45,5
181040
Wrench 19
50
28
ø 23
M10
45,5
151011 461
53
M10
ø 27
,5ø
15
Wrench 19
Part. 182
Part. 183
Part. 185
TIGHTENING ELEMENTS TIGHTENING ELEMENTS
Tightening knob
Tightening knob
Tightening knob
Part.
183 54921
- Material : knob in reinforced polyamide PA FV (black) , threaded insert in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code
Part.
182 54911
- Material : knob in reinforced polyamide PA FV (black) , threaded insert in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code Part.
185 53081
- Material : knob in reinforced polyamide PA FV (black) , spindle in nickel plated brass.- Max recommended tightening torque : 2,5 Kgm (manual tightening), 4 Kgm ( tightening with wrench). For high tightening torques apply a 19 mm wrench to the hexagon of the insert.- Packaging : 50 pieces.
Code
130 131
Conveyor Components Conveyor Components
85
31,242,1
55,521
,41,
112,6
25,2
12,6
13,411,8
1,1
21,4
23,3
12,5
36,7
12,6
21,4
1,1
6 max
.
H
LL
Part. 567
25,2
H
LL 25,2 25,2
H
L
H
L
ø11
ø11
13
13ø1
113
67,6
+ – 1
8567,6
+ – 1
8567,6
+ – 1
Part. 567
Part. 568
L and H see page 145
L and H see page 145
L and H see page 145
L and H see page 145
Part. 567Part. 567
H
LL
Part. 569
25,2
H
LL 25,2 25,2
Part. 569
Part. 568
Part. 569Part. 569
Part. 567
Part. 569
L
H
L
H
Part. 567
- Use : - Head to tail transfer see Fig. 1-2. - 90° transfer see Fig. 5.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Modularity : snap-on assembly with Part. 568.- Packaging : 10 pieces.- Positioning related to sprockets : see page 145.
- Use : - Head to tail transfer see Fig. 3-4. - 90° transfer see Fig. 6.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Modularity : snap-on assembly with Part. 568.- Packaging : 10 pieces.- Positioning related to sprockets : see page 145.
- Use : snap-on assembly with Part. 567-569.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Packaging : 20 pieces.
Part.
567 601072 0,09
WeightkgCode
Part.
569 601092 0,08
WeightkgCode
Part.
568 601082 0,06
WeightkgCode
Part. 569
Part. 568
Head to tail transfer of small andlight products
90° transfer of small andlight products
• Fig. 1 - Head to tail transfer with 2 modules
• Fig. 5 - 90° transfer with Part. 567
• Fig. 6 - 90° transfer with Part. 569
• Fig. 2 - Head to tail transfer with 3 modules
Head to tail transfer of big and heavy products
90° transfer of big and heavy products
Fixing
• Fig. 3 - Head to tail transfer with 2 modules • Fig. 4 - Head to tail transfer with 3 modules
Screw M5
Screw M5
Screw M5
Screws aretightened withan hexagon keyinserted betweenrollers
MODULAR TRANSFER ROLLER PLATE MODULAR TRANSFER ROLLER PLATE
Centre transfer module
End transfer module (with lip)
End transfer module
Assembly of Part. 567 - 568 - 569
130 131
Conveyor Components Conveyor Components
85
31,242,1
55,5
21,4
1,112,6
25,2
12,6
13,411,8
1,1
21,4
23,3
12,5
36,7
12,6
21,4
1,1
6 max
.
H
LL
Part. 567
25,2
H
LL 25,2 25,2H
L
H
L
ø11
ø11
13
13ø1
113
67,6
+ – 1
8567,6
+ – 1
8567,6
+ – 1
Part. 567
Part. 568
L and H see page 145
L and H see page 145
L and H see page 145
L and H see page 145
Part. 567Part. 567H
LL
Part. 569
25,2
H
LL 25,2 25,2
Part. 569
Part. 568
Part. 569Part. 569
Part. 567
Part. 569
L
H
L
H
Part. 567
- Use : - Head to tail transfer see Fig. 1-2. - 90° transfer see Fig. 5.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Modularity : snap-on assembly with Part. 568.- Packaging : 10 pieces.- Positioning related to sprockets : see page 145.
- Use : - Head to tail transfer see Fig. 3-4. - 90° transfer see Fig. 6.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Modularity : snap-on assembly with Part. 568.- Packaging : 10 pieces.- Positioning related to sprockets : see page 145.
- Use : snap-on assembly with Part. 567-569.- Material : frame and rollers in acetal Rex-HP™ (dark grey) very low coefficient of friction. Roller pins and screws in stainless steel AISI 304.- Packaging : 20 pieces.
Part.
567 601072 0,09
WeightkgCode
Part.
569 601092 0,08
WeightkgCode
Part.
568 601082 0,06
WeightkgCode
Part. 569
Part. 568
Head to tail transfer of small andlight products
90° transfer of small andlight products
• Fig. 1 - Head to tail transfer with 2 modules
• Fig. 5 - 90° transfer with Part. 567
• Fig. 6 - 90° transfer with Part. 569
• Fig. 2 - Head to tail transfer with 3 modules
Head to tail transfer of big and heavy products
90° transfer of big and heavy products
Fixing
• Fig. 3 - Head to tail transfer with 2 modules • Fig. 4 - Head to tail transfer with 3 modules
Screw M5
Screw M5
Screw M5
Screws aretightened withan hexagon keyinserted betweenrollers
MODULAR TRANSFER ROLLER PLATE MODULAR TRANSFER ROLLER PLATE
Centre transfer module
End transfer module (with lip)
End transfer module
Assembly of Part. 567 - 568 - 569
132 133
Conveyor Components Conveyor Components
15
Df ø 13
ø 30
+ 0
,3+
0,1
Df ø 13
ø 25
11
+ 0
,3+
0,1
ø 12
ø 17
ø 50
20
+ 0
,3+
0,1
1922
ø 10
ø 19
ø 47
+ 0
,3+
0,1
10,5
172,
5
30
ø 15ø 25
ø 10ø 21
8,5
315
26,5
ø 6,3 ø 10,5
ø 5,
2
ø 7,
2
9,8
0,4
ø 11
ø 11
40,5
ø 5,
2
Part. 63-95
Part. 363
Part. 455
ROLLERS ROLLERS
Rollers
Roller
Roller
Part. 20-21
Part. 16 Roller
Part. 76 Roller
Rollers
Part. 20 Part. 21Part. 63 Part. 95Bore dia.
Dfmm
5,59,5
10,5
Part.
215142051430*51440*
- Material : polyamide PA (black).- Packaging : 200 pieces.
720
Code
Part.
455 614381
Code
- Material : acetal Rex-LF® ( light brown) very low coefficient of friction.- Packaging : 500 pieces.
Part.
363 64434
Code
- Material : acetal Rex-LF® ( light brown) very low coefficient of friction.- Packaging : 5000 pieces.
Part.
76 51390
Code
Part.
16 51400
Code
- Material : polyamide PA (black).- Packaging : 100 pieces.
- Material : roller in acetal POM (orange), bush in polyamide PA (white ).- Packaging : 100 pieces.
Part.
63 51370
95 51380
Code
- Material : acetal POM (white ).- Packaging : Part. 63 (500 pieces), Part. 95 (200 pieces) .- Part. 63 can be used as spare part in roller guides Part. 128-128 S-628 S.
51410*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
132 133
Conveyor Components Conveyor Components
15
Df ø 13
ø 30
+ 0
,3+
0,1
Df ø 13
ø 25
11
+ 0
,3+
0,1
ø 12
ø 17
ø 50
20
+ 0
,3+
0,1
1922
ø 10
ø 19
ø 47
+ 0
,3+
0,1
10,5
172,
5
30
ø 15ø 25
ø 10ø 21
8,5
315
26,5
ø 6,3 ø 10,5
ø 5,
2
ø 7,
2
9,8
0,4ø
11ø
11
40,5
ø 5,
2
Part. 63-95
Part. 363
Part. 455
ROLLERS ROLLERS
Rollers
Roller
Roller
Part. 20-21
Part. 16 Roller
Part. 76 Roller
Rollers
Part. 20 Part. 21Part. 63 Part. 95Bore dia.
Dfmm
5,59,5
10,5
Part.
215142051430*51440*
- Material : polyamide PA (black).- Packaging : 200 pieces.
720
Code
Part.
455 614381
Code
- Material : acetal Rex-LF® ( light brown) very low coefficient of friction.- Packaging : 500 pieces.
Part.
363 64434
Code
- Material : acetal Rex-LF® ( light brown) very low coefficient of friction.- Packaging : 5000 pieces.
Part.
76 51390
Code
Part.
16 51400
Code
- Material : polyamide PA (black).- Packaging : 100 pieces.
- Material : roller in acetal POM (orange), bush in polyamide PA (white ).- Packaging : 100 pieces.
Part.
63 51370
95 51380
Code
- Material : acetal POM (white ).- Packaging : Part. 63 (500 pieces), Part. 95 (200 pieces) .- Part. 63 can be used as spare part in roller guides Part. 128-128 S-628 S.
51410*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
134 135
Conveyor Components Conveyor Components
1/4 gas Dfø 23
108
2442
Dfø
24
19 1332
ø jet
13
ø 61/4 gas
37
Dfa°
ø 22
h
28 26
1624
54
ø 91
ø 97
M12
253
24,5 17
10
16
M10
ø 80
ø 86
41,5
3,218,5
L jet
DfA A
a°
h
Part. 19
Part. 18
WINDING TENSIONERS NOZZLES
Nozzle conical shape
Nozzle shell shape
Part. 79
Part. 75 Winding tensioner
Winding tensioner
Part. 75-79 left
Part. 75-79 right
Arrow indicatesdirection of load
Bore dia.Df
mm
1,52,55
Part.
19
- Use : washing equipment.- Material : polyamide PA (black).- Max operating temperature in contact with hot water : 70° C.- Packaging : 100 pieces.
Code
Bore dia.Df
mm
1,52,55
Jet dia.mm
160200600
distanceh
mm
500500500
outletangle
a°
Tests performed at 2 bar pressure.
Tests performed at 2 bar pressure.
18°22°60°
Bore dia.Df
mm
24
Jetwidth
Lmm
250160
distanceh
mm
500500
outletangle
a°
28°18°
Bore dia.Df
mm
24
Part.
18 5148051490
- Use : washing equipment.- Material : polyamide PA (white ).- Max operating temperature in contact with hot water : 70° C.- Packaging : 200 pieces.
Code
Loadgr.
0÷2000
Windingtravelmm
2000
Direction oftravel
rightleft
Part.
79 5135051360
- Material : pulley in polyamide PA (orange), pin in brass.- Packaging : 10 pieces.
Code
Loadgr.
0÷4000
Windingtravemm
2500
Direction oftravel
rightleft
Part.
75
52130N52120N
0÷2800* 600 rightleft
623882N623872N
* = Unwinding the spring, the load is almost constant (10/20% loss of load).- Material : pulley in reinforced polyamide PA FV (black), pin in brass.- Packaging : 10 pieces.
Code
• Assembly of Part. 79-75 • Capacity diagram of Part. 19
Jet shape : conical
Section A-AJet shape : flat
• Dimensions and jet shape of Part. 19
• Dimensions and jet shape of Part. 18
Pressure P (bar )
Flow
rate
Q (
litre
s/m
inut
e)
32 4 5 6 7 810
2
0
4
6
8
10
12
14
16
18
20
• Capacity diagram of Part. 18
Pressure P (bar )
Flow
rate
Q (
litre
s/m
inut
e)
32 4 5 6 7 810
2
0
4
6
8
10
12
14
16
Df = 5
Df = 2,5
Df = 1,5
Df = 4
Df = 2
51450*5146051470*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
134 135
Conveyor Components Conveyor Components
1/4 gas Dfø 23
108
2442
Dfø
24
19 1332
ø jet13
ø 61/4 gas
37
Dfa°
ø 22
h
28 26
1624
54
ø 91
ø 97
M12
253
24,5 17
10
16
M10
ø 80
ø 86
41,5
3,218,5
L jet
DfA A
a°
h
Part. 19
Part. 18
WINDING TENSIONERS NOZZLES
Nozzle conical shape
Nozzle shell shape
Part. 79
Part. 75 Winding tensioner
Winding tensioner
Part. 75-79 left
Part. 75-79 right
Arrow indicatesdirection of load
Bore dia.Df
mm
1,52,55
Part.
19
- Use : washing equipment.- Material : polyamide PA (black).- Max operating temperature in contact with hot water : 70° C.- Packaging : 100 pieces.
Code
Bore dia.Df
mm
1,52,55
Jet dia.mm
160200600
distanceh
mm
500500500
outletangle
a°
Tests performed at 2 bar pressure.
Tests performed at 2 bar pressure.
18°22°60°
Bore dia.Df
mm
24
Jetwidth
Lmm
250160
distanceh
mm
500500
outletangle
a°
28°18°
Bore dia.Df
mm
24
Part.
18 5148051490
- Use : washing equipment.- Material : polyamide PA (white ).- Max operating temperature in contact with hot water : 70° C.- Packaging : 200 pieces.
Code
Loadgr.
0÷2000
Windingtravelmm
2000
Direction oftravel
rightleft
Part.
79 5135051360
- Material : pulley in polyamide PA (orange), pin in brass.- Packaging : 10 pieces.
Code
Loadgr.
0÷4000
Windingtravemm
2500
Direction oftravel
rightleft
Part.
75
52130N52120N
0÷2800* 600 rightleft
623882N623872N
* = Unwinding the spring, the load is almost constant (10/20% loss of load).- Material : pulley in reinforced polyamide PA FV (black), pin in brass.- Packaging : 10 pieces.
Code
• Assembly of Part. 79-75 • Capacity diagram of Part. 19
Jet shape : conical
Section A-AJet shape : flat
• Dimensions and jet shape of Part. 19
• Dimensions and jet shape of Part. 18
Pressure P (bar )
Flow
rate
Q (
litre
s/m
inut
e)
32 4 5 6 7 810
2
0
4
6
8
10
12
14
16
18
20
• Capacity diagram of Part. 18
Pressure P (bar )
Flow
rate
Q (
litre
s/m
inut
e)
32 4 5 6 7 810
2
0
4
6
8
10
12
14
16
Df = 5
Df = 2,5
Df = 1,5
Df = 4
Df = 2
51450*5146051470*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
136 137
Conveyor Components Conveyor Components
- With sprockets
- With idler wheels
- With rollers
Keyway
46
160
6581
39 29
R min = 60
Chain section
L = + π • R + (46 • 2)
L = chain length (mm).A = chain stroke (mm).R = curving radius (mm).
R
A
46
R
A2
A2
54
24 20
ø 8 56
24 20
ø 8
S
ø = 30-35-40
ø = 18 to 40
ø = 18 to 40
B
ø A
T
M4
Df
Part. 612
CABLE CARRIAGE CHAINS SPLIT SHAFT COLLARS
Split shaft collarPart. 112
Part. 114 Attachments
Cable carriage chain
Accessories
Bore dia.Df
mm
182025
Part.
612614712614722619452
Code
Part.
112 51610
- Use : for carrying cables and hoses in the machine and protecting them from tensile and torsional sress.- Material : polyamide PA (black).- Assembly of engaged links : the engagement system allows a quick easy dismountling.- Packaging : 5 metres.
Code
• Calculation of chain length L
• Assembly of Part. 114
• Assembly of Part. 612
ø Amm
Tmm
384045
Smm
141414
Bmm
–––
Weightkg
0,0180,0190,022
–––
303540
612614732614742615012
- Material : collar in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 0,3 Kgm.- Packaging : 100 pieces.
505663
161618
81012
0,0260,0300,040
33,338,343,3
Part.
114
- Material : zinc plated steel.- State of supply : complete with No. 4 connections.- Packaging : 5 kit.
Code
Part. 112Part. 114
AView A View B
B
Part. 114
• Without seat keyway
• With seat keyway
59040*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
136 137
Conveyor Components Conveyor Components
- With sprockets
- With idler wheels
- With rollers
Keyway
46
160
6581
39 29
R min = 60
Chain section
L = + π • R + (46 • 2)
L = chain length (mm).A = chain stroke (mm).R = curving radius (mm).
R
A
46
R
A2
A2
54
24 20
ø 8 56
24 20
ø 8
S
ø = 30-35-40
ø = 18 to 40
ø = 18 to 40
B
ø A
T
M4
Df
Part. 612
CABLE CARRIAGE CHAINS SPLIT SHAFT COLLARS
Split shaft collarPart. 112
Part. 114 Attachments
Cable carriage chain
Accessories
Bore dia.Df
mm
182025
Part.
612614712614722619452
Code
Part.
112 51610
- Use : for carrying cables and hoses in the machine and protecting them from tensile and torsional sress.- Material : polyamide PA (black).- Assembly of engaged links : the engagement system allows a quick easy dismountling.- Packaging : 5 metres.
Code
• Calculation of chain length L
• Assembly of Part. 114
• Assembly of Part. 612
ø Amm
Tmm
384045
Smm
141414
Bmm
–––
Weightkg
0,0180,0190,022
–––
303540
612614732614742615012
- Material : collar in reinforced polyamide PA FV (black), tightening bolt in stainless steel AISI 304.- Max recommended tightening torque : 0,3 Kgm.- Packaging : 100 pieces.
505663
161618
81012
0,0260,0300,040
33,338,343,3
Part.
114
- Material : zinc plated steel.- State of supply : complete with No. 4 connections.- Packaging : 5 kit.
Code
Part. 112Part. 114
AView A View B
B
Part. 114
• Without seat keyway
• With seat keyway
59040*
* : items highlighted are made to order and not in stock, minimum quantity may apply, consult our customer service for availability.
139
TECHNICAL INFORMATION
139
TECHNICAL INFORMATION
140 141
Conveyor Components Conveyor ComponentsMATERIAL CHARACTERISTICSOPERATING TEMPERATURES
CALCULATION OF THERMAL EXPANSION
Plastic materials Operating temperatures
Calculation of thermalexpansion
Metal materials
Polyamide PA• An extremely tough material with excellent dimensional stability even at relatively high temperatures • Good resistance to chemical attack • Inflammability : 94 HB.
Reinforced polyamide PA FVThis material offers improved ductile strength compared with PA polyamide, as well as improved rigidity and dimensional stability • Operating temperatures can also be higher • Inflammability : 94 HB.
Polypropylene PP• Ideal for use at high temperatures • High resistance to chemical attack • Reduced mechanical characteristics• Inflammability : 94 HB.
Reinforced polypropylene PP FV• This material offers better dimensional stability and rigidity than PP polypropylene as well as better mechanical strength • Inflammability : 94 HB.
Polyethylene PE (UHMWPE)• This is the plastic material which is most suited to the manufacture of lateral guides subject to sliding contact, thanks to an extremely low coefficient of friction, excellent wear resistance and zero absorption ( important in water lubricated applications) • PE polyethylene also offers high resistance to chemical attack and good sound absorbing qualities • Inflammability : 94 HB.
Acetal POM• Acetalic resins are among the strongest and most resistant thermoplastic materials known • The most important characteristics of these materials are excellent ductile strength, impact resistance, rigidity, and dimensional stability • These materials also resist humidity and attack by most chemical agents • The materials cannot be used in continuous contact with steam or hot water at temperatures above 60° C • Inflammability : 94 HB.
Acetal Rex LF® • This material conserves the same characteristics of POM acetalic • The addition of a self-lubricating agent, however, gives an extremely low coefficient of friction and excellent wear resistance • Rex LF® acetalic has the same limitations as POM acetalic as far as continuous contact with hot water and steam are concerned• Inflammability : 94 HB.
Stainless steel AISI 303 - AISI 304• An austenitic steel generally known as 18/8 steel offering excellent corrosion and oxidation resistance • Ideal for the food industry, dairy and cheese production, beer production, and the pharmaceutical industry • Stainless steel is cold rolled and responsive to magnets.
Zinc plated steel• Galvanically zinc coated steel • Galvanization thickness 7 microns.
Nickel plated brass• Good resistance to chemicals • Humid and wet environments.
Material Description
PAPA FVPPPP FVPE (UHMWPE)POMRex-LF ®
AISI 303 - AISI 304Fe ZnOT
PolyamidReinforced polyamidPolypropyleneReinforced polypropylenePolyethyleneAcetalAcetalAustenitic stainless steel (18/8)Zinc plated steelNickel plated brass
0- 5
+ 5+ 5- 40- 40- 40- 70- 40- 40
+ 80+ 120+ 105+ 115
+ 80+ 80+ 80
+ 430+ 180+ 180
+ 65+ 100+ 105+ 115+ 70+ 65+ 65
+ 120–
+ 120
contact withair
contact withhot water
Operating temperatures (°C)
Min MaxMax
Lt = L0 • [ 1 + a • ( T – 20°C ) ]LtL0 a T 20 °C
= final length (mm.)= initial length (mm.)= coefficient of linear expansion.= operating temperature (°C).= ambient temperature.
Example : a guide having initial length L0 = 1000 mm, coefficient of linear expansion 2X10-4, and an operatingtemperature of 70 °C, expands by :
Lt = 1000 mm • [ 1 + 0,0002 • ( 70 °C - 20 °C ) ] = 1010 mm
140 141
Conveyor Components Conveyor ComponentsMATERIAL CHARACTERISTICSOPERATING TEMPERATURES
CALCULATION OF THERMAL EXPANSION
Plastic materials Operating temperatures
Calculation of thermalexpansion
Metal materials
Polyamide PA• An extremely tough material with excellent dimensional stability even at relatively high temperatures • Good resistance to chemical attack • Inflammability : 94 HB.
Reinforced polyamide PA FVThis material offers improved ductile strength compared with PA polyamide, as well as improved rigidity and dimensional stability • Operating temperatures can also be higher • Inflammability : 94 HB.
Polypropylene PP• Ideal for use at high temperatures • High resistance to chemical attack • Reduced mechanical characteristics• Inflammability : 94 HB.
Reinforced polypropylene PP FV• This material offers better dimensional stability and rigidity than PP polypropylene as well as better mechanical strength • Inflammability : 94 HB.
Polyethylene PE (UHMWPE)• This is the plastic material which is most suited to the manufacture of lateral guides subject to sliding contact, thanks to an extremely low coefficient of friction, excellent wear resistance and zero absorption ( important in water lubricated applications) • PE polyethylene also offers high resistance to chemical attack and good sound absorbing qualities • Inflammability : 94 HB.
Acetal POM• Acetalic resins are among the strongest and most resistant thermoplastic materials known • The most important characteristics of these materials are excellent ductile strength, impact resistance, rigidity, and dimensional stability • These materials also resist humidity and attack by most chemical agents • The materials cannot be used in continuous contact with steam or hot water at temperatures above 60° C • Inflammability : 94 HB.
Acetal Rex LF® • This material conserves the same characteristics of POM acetalic • The addition of a self-lubricating agent, however, gives an extremely low coefficient of friction and excellent wear resistance • Rex LF® acetalic has the same limitations as POM acetalic as far as continuous contact with hot water and steam are concerned• Inflammability : 94 HB.
Stainless steel AISI 303 - AISI 304• An austenitic steel generally known as 18/8 steel offering excellent corrosion and oxidation resistance • Ideal for the food industry, dairy and cheese production, beer production, and the pharmaceutical industry • Stainless steel is cold rolled and responsive to magnets.
Zinc plated steel• Galvanically zinc coated steel • Galvanization thickness 7 microns.
Nickel plated brass• Good resistance to chemicals • Humid and wet environments.
Material Description
PAPA FVPPPP FVPE (UHMWPE)POMRex-LF ®
AISI 303 - AISI 304Fe ZnOT
PolyamidReinforced polyamidPolypropyleneReinforced polypropylenePolyethyleneAcetalAcetalAustenitic stainless steel (18/8)Zinc plated steelNickel plated brass
0- 5
+ 5+ 5- 40- 40- 40- 70- 40- 40
+ 80+ 120+ 105+ 115
+ 80+ 80+ 80
+ 430+ 180+ 180
+ 65+ 100+ 105+ 115+ 70+ 65+ 65
+ 120–
+ 120
contact withair
contact withhot water
Operating temperatures (°C)
Min MaxMax
Lt = L0 • [ 1 + a • ( T – 20°C ) ]LtL0 a T 20 °C
= final length (mm.)= initial length (mm.)= coefficient of linear expansion.= operating temperature (°C).= ambient temperature.
Example : a guide having initial length L0 = 1000 mm, coefficient of linear expansion 2X10-4, and an operatingtemperature of 70 °C, expands by :
Lt = 1000 mm • [ 1 + 0,0002 • ( 70 °C - 20 °C ) ] = 1010 mm
142 143
Conveyor Components Conveyor ComponentsRESISTANCE AGAINST CHEMICAL AGENTS RESISTANCE AGAINST CHEMICAL AGENTS
CHEMICAL AGENT Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C
ACETIC ACID 100 + 10 + 40 + 5 – 20 + /ACETONE 100 + + + / 50 + +ALUMINIUM CHLORIDE 10 + –AMMONIA 10 + + 30 + Sol. + 50 + –AMMONIA CONC. 10 + + + –AMMONIUM CHLORIDE 10 + 10 /AMYL ALCOHOL 100 + + +ANILINE / 3 + 100 + 3 + 3 +BEER + + + + +BENZENE + / + + 70 /BENZOIC ACID Sat. / Sat. + 100 /BENZOL 100 + / / + + +BORIC ACID 10 + Sat. + Sat. + + 100 /BRINE / + Sat. + /BUTTER + + + + + +BUTHYL ALCOHOL 100 + + +BUTYRIC ACID – + 100 + – 5 +CALCIUM CHLORIDE 10 + Sat. + 50 + / 10 – +CARBON SULPHIDE 100 + + + + +CARBON TETRACHLORIDE + / – + 10 – +CAUSTIC SODA 10 + 25 + 52 + 25 – +CHEESE – + + +CHLORINATED WATER + – – – –CHLOROFORM 100 – – / – 100 + +CHOCOLATE – + +CITRIC ACID 10 / + 10 + / 5 + –CUPRIC SULPHATE 10 + + Sat. + + 5 +DISTILLED WATER + + + + +ETHYL ACETAT 100 + + 100 /ETHYL ALCOHOL 96 + + 96 + + 10 + +ETHYL CHLORIDE 100 + / – + + /ETHYL ETHER 100 + + + +FERRIC CHLORIDE 10 + + 20 –FOOD FATS + + + + +FOOD OILS + + + + +FORMALDEHYDE 30 + / 40 + + 100 + +FORMIC ACID 10 – 10 + 100 + 10 – 5 / +FREON 12 + +FRESH WATER + + + + +FRUIT JUICES + + + + +GASOLINE + / / + + /GLYCERINE + + + + + +HYDROCHLORIC ACID 10 – 37 + 30 + 37 – – /HYDROCHLORIC ACID 2 – 2 + 2 + 2 /HYDROFLUORIC ACID 40 – 70 + 40 + – –HYDROGEN PEROXIDE 3 – + 30 + – 30 + /IODINE – + + +LACTIC ACID 10 + + 20 + + 5 + –LINSEED OIL + + 100 +MAGNESIUM CHLORIDE 10 + Sat. + 5 +MERCURY + + 100 + + 100 / /METHYL ALCOHOL 100 + + + + 100 / +METHYLENE CHLORIDE 100 + / / – /MILK + + + + + +MINERAL OILS + + + + +MUSTARD – + + +NITRIC ACID 10 – 5 / + 5 – 10 +OLEIC ACID 100 + / + – 100 / +PARAFFIN + + 100 / + +PETROLEUM + – 100 / + + +PETROLEUM ETHER + + + + + +
AISI 303AISI 304
POLYETHYLENE PE
Conc.% 23° C
POLYAMIDEPA
ACETALPOM
NICKEL PLATEDBRASS
POLYPROPYLENEPP
PHENOL – + 10 +PHOSFORIC ACID 10 – 95 + 85 + 10 – 10 – –POTASSIUM HYDROXIDE 10 + 50 +SEA WATER + + + / + +SILICONE OIL + +SILVER NITRATE + 20 + 60 /SOAP AND WATER + + + + +SODIUM CARBONATE 10 + + Sat. + + 5 +SODIUM CHLORIDE 10 + + Sat. + + 5 + +SODIUM HYDROXIDE 10 + + 30 + 10 + –SODIUM HYPOCHLORITE + + 20 + – –SODIUM SILICATE + 100 +SODIUM SULPHATE 10 + + Sat. + + 5 +SOFT DRINKS + + + + +SUDS + +SULPHURIC ACID 10 – 40 / 98 + 40 – 10 – +TARTARIC ACID + + 10 + 30 / 10 + –TETRALINE + –TINCTURE OF IODINE – + + + –TRANSFORMER OIL + /TRICHLORETHYLENE / + / – + +TURPENTINE / – – – +VASELINE + / + +VEGETABLE JUICES + + + + +VEGETABLE OILS + + + + +VINEGAR + + + + + +WHISKY + + + + + +WINE + + + + + +XILOL + / – + + /ZINC CHLORIDE 10 / 20 + 10 –
Abbreviations: Sat. = saturated.
Legend. .
+ = Good resistance.
/ = Fairly good resistance ( limited use depending on working conditions).
– = Poor resistance (not recommended).
N.B. Where tests have not been carried out the spaces are left blank.
The data shown in this table. .
are taken from laboratory tests, performed on unstrained test samples. It should be considered as purely indicative since material behaviour under real working conditions depends on different factors: temperature, concentration of the chemical agent, quick or long-lasting effect of the chemical agent.
CHEMICAL AGENT Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C
AISI 303AISI 304
POLYETHYLENE PE
Conc.% 23° C
POLYAMIDEPA
ACETALPOM
NICKEL PLATEDBRASS
POLYPROPYLENEPP
142 143
Conveyor Components Conveyor ComponentsRESISTANCE AGAINST CHEMICAL AGENTS RESISTANCE AGAINST CHEMICAL AGENTS
CHEMICAL AGENT Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C
ACETIC ACID 100 + 10 + 40 + 5 – 20 + /ACETONE 100 + + + / 50 + +ALUMINIUM CHLORIDE 10 + –AMMONIA 10 + + 30 + Sol. + 50 + –AMMONIA CONC. 10 + + + –AMMONIUM CHLORIDE 10 + 10 /AMYL ALCOHOL 100 + + +ANILINE / 3 + 100 + 3 + 3 +BEER + + + + +BENZENE + / + + 70 /BENZOIC ACID Sat. / Sat. + 100 /BENZOL 100 + / / + + +BORIC ACID 10 + Sat. + Sat. + + 100 /BRINE / + Sat. + /BUTTER + + + + + +BUTHYL ALCOHOL 100 + + +BUTYRIC ACID – + 100 + – 5 +CALCIUM CHLORIDE 10 + Sat. + 50 + / 10 – +CARBON SULPHIDE 100 + + + + +CARBON TETRACHLORIDE + / – + 10 – +CAUSTIC SODA 10 + 25 + 52 + 25 – +CHEESE – + + +CHLORINATED WATER + – – – –CHLOROFORM 100 – – / – 100 + +CHOCOLATE – + +CITRIC ACID 10 / + 10 + / 5 + –CUPRIC SULPHATE 10 + + Sat. + + 5 +DISTILLED WATER + + + + +ETHYL ACETAT 100 + + 100 /ETHYL ALCOHOL 96 + + 96 + + 10 + +ETHYL CHLORIDE 100 + / – + + /ETHYL ETHER 100 + + + +FERRIC CHLORIDE 10 + + 20 –FOOD FATS + + + + +FOOD OILS + + + + +FORMALDEHYDE 30 + / 40 + + 100 + +FORMIC ACID 10 – 10 + 100 + 10 – 5 / +FREON 12 + +FRESH WATER + + + + +FRUIT JUICES + + + + +GASOLINE + / / + + /GLYCERINE + + + + + +HYDROCHLORIC ACID 10 – 37 + 30 + 37 – – /HYDROCHLORIC ACID 2 – 2 + 2 + 2 /HYDROFLUORIC ACID 40 – 70 + 40 + – –HYDROGEN PEROXIDE 3 – + 30 + – 30 + /IODINE – + + +LACTIC ACID 10 + + 20 + + 5 + –LINSEED OIL + + 100 +MAGNESIUM CHLORIDE 10 + Sat. + 5 +MERCURY + + 100 + + 100 / /METHYL ALCOHOL 100 + + + + 100 / +METHYLENE CHLORIDE 100 + / / – /MILK + + + + + +MINERAL OILS + + + + +MUSTARD – + + +NITRIC ACID 10 – 5 / + 5 – 10 +OLEIC ACID 100 + / + – 100 / +PARAFFIN + + 100 / + +PETROLEUM + – 100 / + + +PETROLEUM ETHER + + + + + +
AISI 303AISI 304
POLYETHYLENE PE
Conc.% 23° C
POLYAMIDEPA
ACETALPOM
NICKEL PLATEDBRASS
POLYPROPYLENEPP
PHENOL – + 10 +PHOSFORIC ACID 10 – 95 + 85 + 10 – 10 – –POTASSIUM HYDROXIDE 10 + 50 +SEA WATER + + + / + +SILICONE OIL + +SILVER NITRATE + 20 + 60 /SOAP AND WATER + + + + +SODIUM CARBONATE 10 + + Sat. + + 5 +SODIUM CHLORIDE 10 + + Sat. + + 5 + +SODIUM HYDROXIDE 10 + + 30 + 10 + –SODIUM HYPOCHLORITE + + 20 + – –SODIUM SILICATE + 100 +SODIUM SULPHATE 10 + + Sat. + + 5 +SOFT DRINKS + + + + +SUDS + +SULPHURIC ACID 10 – 40 / 98 + 40 – 10 – +TARTARIC ACID + + 10 + 30 / 10 + –TETRALINE + –TINCTURE OF IODINE – + + + –TRANSFORMER OIL + /TRICHLORETHYLENE / + / – + +TURPENTINE / – – – +VASELINE + / + +VEGETABLE JUICES + + + + +VEGETABLE OILS + + + + +VINEGAR + + + + + +WHISKY + + + + + +WINE + + + + + +XILOL + / – + + /ZINC CHLORIDE 10 / 20 + 10 –
Abbreviations: Sat. = saturated.
Legend. .
+ = Good resistance.
/ = Fairly good resistance ( limited use depending on working conditions).
– = Poor resistance (not recommended).
N.B. Where tests have not been carried out the spaces are left blank.
The data shown in this table. .
are taken from laboratory tests, performed on unstrained test samples. It should be considered as purely indicative since material behaviour under real working conditions depends on different factors: temperature, concentration of the chemical agent, quick or long-lasting effect of the chemical agent.
CHEMICAL AGENT Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C Conc.% 23° C
AISI 303AISI 304
POLYETHYLENE PE
Conc.% 23° C
POLYAMIDEPA
ACETALPOM
NICKEL PLATEDBRASS
POLYPROPYLENEPP
144 145
Conveyor Components Conveyor Components
H
LL
Part. 567
25,2
H
LL
Part. 569
25,2
H
P
H
HH
P+ 6 0
+ 1
0
+ 6 0
+ 1
0
+ 1
0
+ 1
0
H
L
H
L
Part. 567 Part. 569
Part. 567 Part. 569
POSITION OF CHAIN GUIDE PROFILES POSITION OF TRANSFER MODULES
Position of chain guideprofiles for TableTop® chains
Type of transfer
H, L dimensions forTableTop® chains
H, L dimensions forMatTop® chains
Position of chain guideprofiles for MatTop® chains
Chain
Dp = primitive diameter of drive sprocket - mm.
1505 - 150621004705 - 4706 - 4707 - 4705 Vacuum - 4803 - 5705 - 5706481248095935 - 5936 - 5935 Vacuum - 8505 - 85065996 - 5997 - 59986390 - 6391 - 63927705 - 77067956
(Dp:2) - 4,95(Dp:2) - 4,37(Dp:2) - 6,35(Dp:2) - 5,2(Dp:2) - 7,9(Dp:2) - 4,35(Dp:2) - 9,1(Dp:2) - 7,0(Dp:2) - 6,35(Dp:2) - 6,35
25253838571957502532
Hmm
Pmm
Chain
Dp = primitive diameter of drive sprocket - mm.
512 - 802 - 805 - 812 - 815 - 820 - 821 - 881 - 881 M - 8811 - 8811 TAB - SLBP 821831 - XLBP 831880 - 880 TAB - 880 BO879 - 879 TAB - 879 BO - LBP 879 BO882 - 882 TAB - SLBP 882 TAB - LBP 883866 - 963 - 1864 - 1873 - 1874 - 2873 - 38731700K - 1700TABK - AC1700K - 1701 - 1790K - 1701TABK - 1702 - 1716K - 1710K - 1710TABK - 1713K - 1713TABK
(Dp:2) + 3,2(Dp:2) + 2,4(Dp:2) + 3,6(Dp:2) + 2,8(Dp:2) + 4,8(Dp:2) + 11(Dp:2) - 12(Dp:2) - 12
4040404040405050
Hmm
Pmm
Chain
802 - 805 - 812 - 815 - 881 881 M - 8811 - 8811 TAB5121864 - 1874 - 48748208218438459631873 - 1853 - 8531843812 Rub. Top - 881 Rub. Top802 Rub. TopHFP 820HFP 821HFP 867 - HFP 1877 - HFP 1873SLBP 821
• Head to tail transfer with Part. 567 • Head to tail transfer with Part. 569
• 90° transfer with Part. 567 • 90° transfer with Part. 569
36,836,853,243,637,438,221,221,243,643,622,038,839,839,440,246,452,7
65,865,868,974,866,767,167,164,975,070,064,966,266,466,366,567,768,8
30,930,945,237,631,532,317,117,137,637,617,932,933,933,534,340,446,8
64,664,667,473,365,465,865,963,973,568,763,965,065,265,165,366,567,7
Z 15H L
Z 17H L
Z 19H L
42,842,860,349,743,444,225,225,249,749,726,044,845,845,446,252,558,7
67,067,070,376,367,968,368,266,076,571,266,067,367,567,567,668,869,8
Z 21H L
48,748,769,355,749,350,129,229,255,755,730,050,751,751,352,158,564,6
68,168,171,677,669,069,469,367,077,972,466,968,468,668,668,769,870,9
Z 23H L
54,754,7
–61,855,356,133,333,261,861,834,056,757,757,358,164,670,6
69,269,2
–79,070,170,670,367,979,273,667,969,569,769,669,770,871,8
Z 25H L
60,760,7
–67,861,362,137,337,367,867,838,162,763,763,364,170,676,6
70,270,2
–80,371,271,671,368,880,574,768,870,570,770,670,871,872,8
Z 27H L
66,766,7
––
67,368,1
–––
73,8–
68,769,769,370,176,6
–
71,271,2
––
72,272,7
–––
75,7–
71,571,771,671,872,8
–
Z 29H L
72,772,7
––
73,374,1
–––––
74,775,775,376,1
––
72,272,2
––
73,273,7
–––––
72,572,672,672,7
––
Chain
880 TAB, 879 TAB 882 TABLPC 279HFP 880 TABHFP 882 TABSLBP 882 TAB
Z 9H L
40,842,749,942,944,757,2
66,666,968,367,067,369,6
52,754,661,854,756,669,1
68,869,170,469,269,571,6
46,748,655,848,750,663,1
67,768,169,468,168,470,6
Z 10H L
Z 11H L
Z 12H L
58,760,667,860,762,675,1
69,970,271,470,270,572,5
Z 13H L
64,7–
73,866,7
––
70,9–
72,371,2
––
Z 14H L
70,7––
72,7––
71,8––
72,2––
Z 15H L
76,7–––––
72,8–––––
Chain
2100 481259966390 - 6391 - 6392
Z 7H L
––
52,5–
––
68,8–
––
70,2–
––
71,8–
–32,5
–49,8
–64,9
–68,3
Z 8H L
Z 9H L
Z 10H L
–––
65,4
–––
71,0
Z 11H L
27,0–––
63,7–––
Z 13H L
9,2–––
59,3–––
Z 12H L
9,256,3
––
59,369,4
––
Z 19H L
59,1–––
69,9–––
Chain
4705 - 4706 - 5705 - 5706 HFP 5705
Z 12H L
57,5–
69,6–
54,557,0
69,169,6
48,551,0
68,068,5
Z 21H L
Z 23H L
Z 24H L
57,560,0
69,670,1
Z 25H L
60,563,0
70,270,6
Z 27H L
66,569,0
71,271,6
Chain
5935 - 5936 7705 - 7706
Z 10H L
13,0–
60,4–
–57,0
–69,6
–49,0
–68,1
Z 16H L
Z 18H L
Z 21H L
–69,1
–71,6
Z 24H L
55,6–
69,3–
Z 25H L
58,6–
69,8–
Z 31H L
76,9–
72,8–
144 145
Conveyor Components Conveyor Components
H
LL
Part. 567
25,2
H
LL
Part. 569
25,2
H
P
H
HH
P+ 6 0
+ 1
0
+ 6 0
+ 1
0
+ 1
0
+ 1
0
H
L
H
L
Part. 567 Part. 569
Part. 567 Part. 569
POSITION OF CHAIN GUIDE PROFILES POSITION OF TRANSFER MODULES
Position of chain guideprofiles for TableTop® chains
Type of transfer
H, L dimensions forTableTop® chains
H, L dimensions forMatTop® chains
Position of chain guideprofiles for MatTop® chains
Chain
Dp = primitive diameter of drive sprocket - mm.
1505 - 150621004705 - 4706 - 4707 - 4705 Vacuum - 4803 - 5705 - 5706481248095935 - 5936 - 5935 Vacuum - 8505 - 85065996 - 5997 - 59986390 - 6391 - 63927705 - 77067956
(Dp:2) - 4,95(Dp:2) - 4,37(Dp:2) - 6,35(Dp:2) - 5,2(Dp:2) - 7,9(Dp:2) - 4,35(Dp:2) - 9,1(Dp:2) - 7,0(Dp:2) - 6,35(Dp:2) - 6,35
25253838571957502532
Hmm
Pmm
Chain
Dp = primitive diameter of drive sprocket - mm.
512 - 802 - 805 - 812 - 815 - 820 - 821 - 881 - 881 M - 8811 - 8811 TAB - SLBP 821831 - XLBP 831880 - 880 TAB - 880 BO879 - 879 TAB - 879 BO - LBP 879 BO882 - 882 TAB - SLBP 882 TAB - LBP 883866 - 963 - 1864 - 1873 - 1874 - 2873 - 38731700K - 1700TABK - AC1700K - 1701 - 1790K - 1701TABK - 1702 - 1716K - 1710K - 1710TABK - 1713K - 1713TABK
(Dp:2) + 3,2(Dp:2) + 2,4(Dp:2) + 3,6(Dp:2) + 2,8(Dp:2) + 4,8(Dp:2) + 11(Dp:2) - 12(Dp:2) - 12
4040404040405050
Hmm
Pmm
Chain
802 - 805 - 812 - 815 - 881 881 M - 8811 - 8811 TAB5121864 - 1874 - 48748208218438459631873 - 1853 - 8531843812 Rub. Top - 881 Rub. Top802 Rub. TopHFP 820HFP 821HFP 867 - HFP 1877 - HFP 1873SLBP 821
• Head to tail transfer with Part. 567 • Head to tail transfer with Part. 569
• 90° transfer with Part. 567 • 90° transfer with Part. 569
36,836,853,243,637,438,221,221,243,643,622,038,839,839,440,246,452,7
65,865,868,974,866,767,167,164,975,070,064,966,266,466,366,567,768,8
30,930,945,237,631,532,317,117,137,637,617,932,933,933,534,340,446,8
64,664,667,473,365,465,865,963,973,568,763,965,065,265,165,366,567,7
Z 15H L
Z 17H L
Z 19H L
42,842,860,349,743,444,225,225,249,749,726,044,845,845,446,252,558,7
67,067,070,376,367,968,368,266,076,571,266,067,367,567,567,668,869,8
Z 21H L
48,748,769,355,749,350,129,229,255,755,730,050,751,751,352,158,564,6
68,168,171,677,669,069,469,367,077,972,466,968,468,668,668,769,870,9
Z 23H L
54,754,7
–61,855,356,133,333,261,861,834,056,757,757,358,164,670,6
69,269,2
–79,070,170,670,367,979,273,667,969,569,769,669,770,871,8
Z 25H L
60,760,7
–67,861,362,137,337,367,867,838,162,763,763,364,170,676,6
70,270,2
–80,371,271,671,368,880,574,768,870,570,770,670,871,872,8
Z 27H L
66,766,7
––
67,368,1
–––
73,8–
68,769,769,370,176,6
–
71,271,2
––
72,272,7
–––
75,7–
71,571,771,671,872,8
–
Z 29H L
72,772,7
––
73,374,1
–––––
74,775,775,376,1
––
72,272,2
––
73,273,7
–––––
72,572,672,672,7
––
Chain
880 TAB, 879 TAB 882 TABLPC 279HFP 880 TABHFP 882 TABSLBP 882 TAB
Z 9H L
40,842,749,942,944,757,2
66,666,968,367,067,369,6
52,754,661,854,756,669,1
68,869,170,469,269,571,6
46,748,655,848,750,663,1
67,768,169,468,168,470,6
Z 10H L
Z 11H L
Z 12H L
58,760,667,860,762,675,1
69,970,271,470,270,572,5
Z 13H L
64,7–
73,866,7
––
70,9–
72,371,2
––
Z 14H L
70,7––
72,7––
71,8––
72,2––
Z 15H L
76,7–––––
72,8–––––
Chain
2100 481259966390 - 6391 - 6392
Z 7H L
––
52,5–
––
68,8–
––
70,2–
––
71,8–
–32,5
–49,8
–64,9
–68,3
Z 8H L
Z 9H L
Z 10H L
–––
65,4
–––
71,0
Z 11H L
27,0–––
63,7–––
Z 13H L
9,2–––
59,3–––
Z 12H L
9,256,3
––
59,369,4
––
Z 19H L
59,1–––
69,9–––
Chain
4705 - 4706 - 5705 - 5706 HFP 5705
Z 12H L
57,5–
69,6–
54,557,0
69,169,6
48,551,0
68,068,5
Z 21H L
Z 23H L
Z 24H L
57,560,0
69,670,1
Z 25H L
60,563,0
70,270,6
Z 27H L
66,569,0
71,271,6
Chain
5935 - 5936 7705 - 7706
Z 10H L
13,0–
60,4–
–57,0
–69,6
–49,0
–68,1
Z 16H L
Z 18H L
Z 21H L
–69,1
–71,6
Z 24H L
55,6–
69,3–
Z 25H L
58,6–
69,8–
Z 31H L
76,9–
72,8–
146 147
Conveyor Components Conveyor ComponentsNUMERICAL INDEX NUMERICAL INDEX
PagePart. PagePart. PagePart. PagePart. PagePart.
Part. 10 98
Part. 11 31
Part. 16 132
Part. 18 135
Part. 19 135
Part. 20 132
Part. 21 132
Part. 22 32
Part. 22 M 32
Part. 37 31
Part. 50 92
Part. 61 110
Part. 63 133
Part. 67 32
Part. 70 92
Part. 71 92
Part. 72 96
Part. 73 26
Part. 74 32
Part. 75 134
Part. 76 132
Part. 79 134
Part. 81 96
Part. 82 90
Part. 82 B 90
Part. 82 P 90
Part. 85 98
Part. 88 97
Part. 89 97
Part. 95 133
Part. 96 111
Part. 97 98
Part. 107 99
Part. 111 89
Part. 112 136
Part. 114 136
Part. 116 89
Part. 119 B 49
Part. 124 49
Part. 125 26-27
Part. 126 26
Part. 128 79-80
Part. 128 S 79
Part. 137 53
Part. 140 100
Part. 141 43
Part. 142 110
Part. 146 49
Part. 153 25
Part. 159 91
Part. 163 102
Part. 168 41
Part. 174 114
Part. 174 Q 115
Part. 174 R 114
Part. 178 103
Part. 179 36
Part. 182 128
Part. 183 128
Part. 184 94
Part. 185 129
Part. 190 94
Part. 191 68
Part. 192 109
Part. 193 101
Part. 198 42
Part. 199 40
Part. 210 84
Part. 210 P 84
Part. 211 86
Part. 213 86-87
Part. 214 87
Part. 215 13-85
Part. 216 14-85
Part. 217 87
Part. 218 82
Part. 219 59
Part. 223 13-58
Part. 226 112
Part. 227 109
Part. 233 82
Part. 236 88
Part. 237 89
Part. 241 5
Part. 242 6
Part. 243 4
Part. 244 5
Part. 247 59
Part. 251 5
Part. 255 108
Part. 256 108
Part. 257 102
Part. 260 124-125
Part. 261 4
Part. 262 4
Part. 263 6
Part. 272 126
Part. 273 63
Part. 274 13
Part. 275 14-85
Part. 280 43
Part. 282 33
Part. 296 68
Part. 298 95
Part. 302 127
Part. 303 127
Part. 308 62
Part. 310 12
Part. 317 58
Part. 336 112
Part. 337 124
Part. 338 113
Part. 339 116
Part. 340 114
Part. 341 118
Part. 341 C 119
Part. 342 118
Part. 343 119
Part. 344 119
Part. 346 60
Part. 356 12
Part. 359 108
Part. 362 6
Part. 363 133
Part. 366 8
Part. 367 8
Part. 368 8
Part. 369 60
Part. 370 9-15-64
Part. 371 9
Part. 372 120
Part. 373 93
Part. 376 68
Part. 377 68
Part. 378 69
Part. 379 69
Part. 386 7
Part. 387 7
Part. 388 27
Part. 393 61
Part. 409 54
Part. 415 42
Part. 416 40
Part. 417 52
Part. 418 45
Part. 419 47
Part. 420 45-47
Part. 421 27
Part. 422 15-64
Part. 437 91
Part. 446 86
Part. 451 91
Part. 454 52
Part. 455 133
Part. 478 91
Part. 518 121
Part. 523 34
Part. 524 35
Part. 533 35
Part. 535 81
Part. 537 81
Part. 539 63
Part. 540 104
Part. 541 105
Part. 542 105
Part. 543 107
Part. 544 106
Part. 545 111
Part. 550 10-11
Part. 551 10
Part. 554 30
Part. 555 30
Part. 556 30
Part. 557 74-76
Part. 559 9
Part. 560 28
Part. 561 28
Part. 562 50
Part. 563 50
Part. 564 51
Part. 565 36
Part. 566 37
Part. 567 130
Part. 568 130
Part. 569 130
Part. 570 75-77
Part. 580 74-76
Part. 581 70-72
Part. 585 70-72
Part. 586 71-73
Part. 587 117
Part. 592 37
Part. 595 116
Part. 596 61
Part. 597 73
Part. 598 67
Part. 599 99
Part. 605 65-66
Part. 606 65-66
Part. 607 77
Part. 608 77
Part. 609 73
Part. 610 67
Part. 611 46
Part. 612 137
Part. 613 29
Part. 614 29
Part. 615 44
Part. 616 48
Part. 617 100
Part. 618 46
Part. 619 48
Part. 620 67-73-77
Part. 624 31
Part. 628 S 78
Serie COMBI 20
Serie KLPC 21
Serie KMU 20
Serie KSU 16
Serie KSU 200 17
Serie KTU 18
Serie KTU 200 19-23
Serie KTU 300 22
Serie KTU 500 24
Serie SSU 16
Serie STU 18
Serie STU 200 19-23
Serie STU 300 22
Serie STU 500 24
146 147
Conveyor Components Conveyor ComponentsNUMERICAL INDEX NUMERICAL INDEX
PagePart. PagePart. PagePart. PagePart. PagePart.
Part. 10 98
Part. 11 31
Part. 16 132
Part. 18 135
Part. 19 135
Part. 20 132
Part. 21 132
Part. 22 32
Part. 22 M 32
Part. 37 31
Part. 50 92
Part. 61 110
Part. 63 133
Part. 67 32
Part. 70 92
Part. 71 92
Part. 72 96
Part. 73 26
Part. 74 32
Part. 75 134
Part. 76 132
Part. 79 134
Part. 81 96
Part. 82 90
Part. 82 B 90
Part. 82 P 90
Part. 85 98
Part. 88 97
Part. 89 97
Part. 95 133
Part. 96 111
Part. 97 98
Part. 107 99
Part. 111 89
Part. 112 136
Part. 114 136
Part. 116 89
Part. 119 B 49
Part. 124 49
Part. 125 26-27
Part. 126 26
Part. 128 79-80
Part. 128 S 79
Part. 137 53
Part. 140 100
Part. 141 43
Part. 142 110
Part. 146 49
Part. 153 25
Part. 159 91
Part. 163 102
Part. 168 41
Part. 174 114
Part. 174 Q 115
Part. 174 R 114
Part. 178 103
Part. 179 36
Part. 182 128
Part. 183 128
Part. 184 94
Part. 185 129
Part. 190 94
Part. 191 68
Part. 192 109
Part. 193 101
Part. 198 42
Part. 199 40
Part. 210 84
Part. 210 P 84
Part. 211 86
Part. 213 86-87
Part. 214 87
Part. 215 13-85
Part. 216 14-85
Part. 217 87
Part. 218 82
Part. 219 59
Part. 223 13-58
Part. 226 112
Part. 227 109
Part. 233 82
Part. 236 88
Part. 237 89
Part. 241 5
Part. 242 6
Part. 243 4
Part. 244 5
Part. 247 59
Part. 251 5
Part. 255 108
Part. 256 108
Part. 257 102
Part. 260 124-125
Part. 261 4
Part. 262 4
Part. 263 6
Part. 272 126
Part. 273 63
Part. 274 13
Part. 275 14-85
Part. 280 43
Part. 282 33
Part. 296 68
Part. 298 95
Part. 302 127
Part. 303 127
Part. 308 62
Part. 310 12
Part. 317 58
Part. 336 112
Part. 337 124
Part. 338 113
Part. 339 116
Part. 340 114
Part. 341 118
Part. 341 C 119
Part. 342 118
Part. 343 119
Part. 344 119
Part. 346 60
Part. 356 12
Part. 359 108
Part. 362 6
Part. 363 133
Part. 366 8
Part. 367 8
Part. 368 8
Part. 369 60
Part. 370 9-15-64
Part. 371 9
Part. 372 120
Part. 373 93
Part. 376 68
Part. 377 68
Part. 378 69
Part. 379 69
Part. 386 7
Part. 387 7
Part. 388 27
Part. 393 61
Part. 409 54
Part. 415 42
Part. 416 40
Part. 417 52
Part. 418 45
Part. 419 47
Part. 420 45-47
Part. 421 27
Part. 422 15-64
Part. 437 91
Part. 446 86
Part. 451 91
Part. 454 52
Part. 455 133
Part. 478 91
Part. 518 121
Part. 523 34
Part. 524 35
Part. 533 35
Part. 535 81
Part. 537 81
Part. 539 63
Part. 540 104
Part. 541 105
Part. 542 105
Part. 543 107
Part. 544 106
Part. 545 111
Part. 550 10-11
Part. 551 10
Part. 554 30
Part. 555 30
Part. 556 30
Part. 557 74-76
Part. 559 9
Part. 560 28
Part. 561 28
Part. 562 50
Part. 563 50
Part. 564 51
Part. 565 36
Part. 566 37
Part. 567 130
Part. 568 130
Part. 569 130
Part. 570 75-77
Part. 580 74-76
Part. 581 70-72
Part. 585 70-72
Part. 586 71-73
Part. 587 117
Part. 592 37
Part. 595 116
Part. 596 61
Part. 597 73
Part. 598 67
Part. 599 99
Part. 605 65-66
Part. 606 65-66
Part. 607 77
Part. 608 77
Part. 609 73
Part. 610 67
Part. 611 46
Part. 612 137
Part. 613 29
Part. 614 29
Part. 615 44
Part. 616 48
Part. 617 100
Part. 618 46
Part. 619 48
Part. 620 67-73-77
Part. 624 31
Part. 628 S 78
Serie COMBI 20
Serie KLPC 21
Serie KMU 20
Serie KSU 16
Serie KSU 200 17
Serie KTU 18
Serie KTU 200 19-23
Serie KTU 300 22
Serie KTU 500 24
Serie SSU 16
Serie STU 18
Serie STU 200 19-23
Serie STU 300 22
Serie STU 500 24
Conveyor Components
®
®
ROBO R
R
Reproduction, even partial, of this catalogue is illegal.
Rexnord Marbett is continually investigating methods of improving products and introducing new technology, we reserve the right to modify data and features shown in the catalogue.Dimensions are indicative only, for tolerances contact us.
Thermoplastic, steel and stainless steel supporting feet.Vibration absorbing feet.Fixed feet.Articulated feet with or without
mounting holes.Threaded bushes for tubes.
Steel TableTop ® and PlateTop chains. Thermoplastic TableTop ® and PlateTopchains.Chains for incline conveyors.Gripper chains.Case conveyor chains.Multiflex chains.Low backline pressure chains.
Special chains.Corner tracks and straight tracks.Sprockets and idler wheels.Accessories.
Solid Top chains. Perforated Top chains.Raised Top chains.Vacuum chains.Sprockets and idler wheels.Accessories.
For further technical information,please apply to our Techincal Dept.
RANGE OF PRODUCTS
Complete sealed supports.Supports with high corrosion resistance.Supports for shafts of Ø 20 and
Ø 45 mm.
Conveyor Components
®
®
ROBO R
R
Reproduction, even partial, of this catalogue is illegal.
Rexnord Marbett is continually investigating methods of improving products and introducing new technology, we reserve the right to modify data and features shown in the catalogue.Dimensions are indicative only, for tolerances contact us.
Thermoplastic, steel and stainless steel supporting feet.Vibration absorbing feet.Fixed feet.Articulated feet with or without
mounting holes.Threaded bushes for tubes.
Steel TableTop ® and PlateTop chains. Thermoplastic TableTop ® and PlateTopchains.Chains for incline conveyors.Gripper chains.Case conveyor chains.Multiflex chains.Low backline pressure chains.
Special chains.Corner tracks and straight tracks.Sprockets and idler wheels.Accessories.
Solid Top chains. Perforated Top chains.Raised Top chains.Vacuum chains.Sprockets and idler wheels.Accessories.
For further technical information,please apply to our Techincal Dept.
RANGE OF PRODUCTS
Complete sealed supports.Supports with high corrosion resistance.Supports for shafts of Ø 20 and
Ø 45 mm.
ConveyorComponents
ConveyorComponents
Bulletin No. 02128 July/2001 Printed in Italy
AustriaDenmarkFranceGermany
ItalyNetherlandsUnited KingdomCanadaUnited States
Mexico
BrazilAustraliaSingaporeChina
- Wien- Copenhagen- Paris-Lyon- Betzdorf (with distribution centre)- Düsseldorf -Siegen-Stuttgart- Correggio (with distribution centre)- ‘s-Gravenzande (with distribution centre)- Warrington- Edmonton-Montreal-Toronto-Vancouver- Atlanta (GA)-Columbus (OH)- Dallas (TX)-Fresno (CA)-Grafton (WI)- Cordoba-Guadalajara- Mexico City-Queretaro- Sao Leopoldo-Sao Paulo- Melbourne-Sydney- Singapore- Shangai
SALES OFFICES:
Rexnord Marbett S.p.A.ItalyVia della Costituzione, 4542015 Correggio (RE)Tel. 0522 - 639333Fax 0522 - 637778E-mail [email protected] www.rexnordmarbett.com
RMCC NederlandP.O. Box 1122690 AC ‘s-GravenzandeThe NetherlandsPhone 0174 - 445111Fax 0174 - 445222E-mail [email protected] www.mcc-nl.nl