ESAB Curved MIG & TIG Welding GlovesThe New Ergonomic Glove Range
Application picture
These superior new welding gloves from ESAB offer a whole new approach to fit, form and function.
Ergonomically designed to fit the natural curve of the hand, offering increased quality & comfort to
the wearer.
Heavy & Fine Cut Cowhide
Improved Fit For Comfort & Safety
Strong Ergonomic Design (Curved)
Angled Thumb For Natural Grasp
Hand And Cuff Fully Lined
Flexible Wrist Area With Less Friction
Welted Seams With Kevlar Stitching
Reinforced Thumb And Crotch
Individually Bagged With Header Card
Thin High Quality Hide Front & Back
Improved Fit For Higher Dexterity
Strong Ergonomic Design (Curved)
Angled Thumb For Natural Grasp
High Abrasion Resistant
Flexible Wrist Area With Less Friction
Welted Seams With Kevlar Stitching
Extremely Lightweight
Individually Bagged With Header Card
Curved TIG Glove Curved MIG Glove
The gloves are very specific to the welding task,
with strong ergonomics in both TIG & MIG gloves. The new gloves will improve the welders ability to do their job, with reduced injury and improved productivity. Whilst making the users feel they will last, it also protects against seen & unseen hazards
Quality accessories for the quality welder
ESAB offers a wide range of accessories. The complete range, along with product information, is available at our local web-sites, look at www.esab.com or contact your local ESAB dealer.
ESAB Sverige AB
Box 8004402 77 GÖTEBORGTel. 031 50 95 00Fax 031 50 92 22www.esab.se
Approved to EN 388, EN 420, EN 12477
Dexterity Level 4
Sizing Level 4
Tear Level 4
Puncture Level 4
Cut Level 2
Abrasion Level 4
ESAB Curved MIG Gauntlet L
ESAB Curved MIG Gauntlet XL
ESAB Curved TIG Gauntlet L
ESAB Curved TIG Gauntlet XL
0700 005 043
0700 005 040
0700 005 041
0700 005 042
Unrivalled service and support
Our commitment and ability to deliver the expected service and support starts immediately after the order is confirmed. We endeavour to offer our customers an After Sales service, which is second to non. A strong and skilful service organisation is prepared to offer service and maintenance, calibration, validation and upgrading of equipment and software.
The service organisation will offer standardised solutions for the reconditioning or modification of existing products.
Spare and wear parts are manufactured according to ESAB’squality plan. Exchange Printed Circuit Board (PCB), exchange modules and components are available for all our products in order to reduce downtime to an absolute minimum. ESAB is continuously upgrading authorised service partners for local service support. Customers who have their own service and maintenance personnel will always be offered a service-training package as part of a total ESAB offering. However, product and process training for end-users will form an additional part of the ESAB offering. Always ask your ESAB sales representative or distributor for a complete ESAB solution.
Benefits
Ordering Inforamtion
Technical Data
Burning Behaviour Level 4
Contact Heat Level 1
Connective Heat Level 3
Radiant Heat Level x
Small splash of
Molten metal Level 4
MIG MIG
Dexterity Level 5
Sizing Level 5
Tear Level 2
Puncture Level 2
Cut Level 1
Abrasion Level 3
TIG TIG
Burning Behaviour Level 4
Contact Heat Level 1
Connective Heat Level 2
Radiant Heat Level x
Small splash of
Molten metal Level 4