WEST & BARKER, INC. is a custom plastic extrusion facility producing a wide variety of profile moldings, trims, and seals. West & Barker is proud to have served the RV Industry with functional and decorative extrusions as well as supplying the Window and Construction Industries for 40 years.
Since our founding in 1971, we have strived to consistently produce the highest quality extruded products at competitive prices. We at WEST & BARKER believe excellent service is our most favored trademark. To prove our commitment to the highest standard we implement a stringent Quality Assurance Policy. Our customer rejection rate is less than 1%. To better serve our clientele we maintain consistency and quality standards far above our competition.
WEST & BARKER,INC.Summit Ave., Niles,OH 44446
Phone: 330-652-9923Fax: 330-652-9991
Custom Plastic Extrusion Catalog
TABLE OF CONTENTS
Bead Welts 2
Bunk Rails 16
Cap Moldings 9
Ceiling/Side Wall Batten 12
Curtain - Door Tracks 13
Cove Gimp 2
Decorative Trims 16
Door Casings 15
Flat Strips 16
F Moldings 8
Gimp 2
Insert Tapes 3
Inside Corner Moldings 10
J Molding 10
L Moldings - Angles 8
Raceway 14Radius Corner Molding 7
Reverse Cove 2Screw Covers 3
Shelf Stop 8
Threshold/Plumbing Cover 14
T Moldings - Flexible P.V.C. 6
Beveled Edge T Molding 6
Bull Nose T Molding 6
Double Lip Off Set T Molding 5
Double Lip Serrated Face T Molding 6
Double Lip T Molding 5
T Moldings - Polyethylene 4
Double Lip Off Set T Molding 4
Double Lip T Molding 4Window Fillets 14
HOLLOW
PART # BEAD LEG
FN 129 3/16" 13/32"FN 491 7/32" 1/2"FN 678 5/16" 11/16"FN 485 11/32" 17/32"
SOLID
PART # SIZEPN 241 1/2"PN 763 1/2"
PART # SIZEFN 130 7/16"FN 285 3/4"
BEAD WELTS
COVE GIMP
REVERSE COVE - POLYETHYLENE (SEMI-RIGID)
REVERSE COVE - FLEXIBLE P.V.C.
2 Return to Table of Contents
INSERT TAPES
3 Return to Table of Contents
FE 1207 1"
FE 157 13/16"
FE 1208 3/4"
PART # SIZE
RN 526 5/8"
RN 581 17/64"RN 788 33/64"
RN 597 35/64"
RN 742 17/32"
SCREW COVERS
RN 277 35/64"RN 277-A 37/64"
DOUBLE LIP T MOLDING - POLYETHYLENE (SEMI-RIGID)
PART # SIZEPN 276-A 1/2"PN 276-C 9/16"PN 276 5/8"PN 504 11/16"PN 504-A 3/4"PN 504-C 13/16"
PART # SIZEPN 504-E 7/8"PN 474-A 15/16"PN 474 1"PN 324-B 1 1/16"PN 324-A 1 1/8"
T MOLDING - POLYETHYLENE (SEMI-RIGID)
PART # SIZEPN 390-A 3/8"PN 390 1/2"PN 390-B 9/16"PN 228-G 5/8"PN 228-C 21/32"PN 228-D 11/16"
PART # SIZEPN 332-C 7/8"PN 332-A 15/16"PN 332-B 1"PN 332 1 1/8"PN 458 1 1/8"PN 458-A 1 1/4"
OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID)
PART # SIZEPN 908 1"PN 392-A 1 1/8"PN 392 1 1/4"
DOUBLE LIP OFF SET T MOLDING - POLYETHYLENE (SEMI-RIGID)
PART # SIZEPN 889 1 1/8"
DOUBLE LIP SERRATED FACE T MOLDING - FLEXIBLE P.V.C.
PART # SIZEPN 492-A 45/64"PN 228-A 3/4"PN 492 3/4"PN 228-B 49/64"PN 228 13/16"PN 228-F 55/64"
4 Return to Table of Contents
*Embossing Available on all Polyethylene T-Moldings
PART # COVERAGE AREAFN 881 1 1/8"
DOUBLE LIP T MOLDINGS - FLEXIBLE P.V.C.
DOUBLE LIP OFF SET T MOLDING - FLEXIBLE P.V.C.
5 Return to Table of Contents
BULL NOSE T MOLDING - FLEXIBLE P.V.C.
BEVELED EDGE T MOLDING - FLEXIBLE P.V.C.
CONTOURED or SERRATED MOLDING - FLEXIBLE P.V.C.
PART # FN 705 1 1/16" 5-BumpFN 705-A 1 1/8" 5-Bump
FN 697 5/8" 3-BumpFN 697-A 13/16" 3-Bump
FN 136 11/16" 1-Bump
6 Return to Table of Contents
PART # SIZE
RN 233 5/32"
RN 864 1/8"RN 864-A 9/64"
RN 444-A 1.4"RN 444 1.5"RN 444-C 1.7"
RN 524 Plastic RetainerAL-ZP Aluminum Retainer
RADIUS CORNER MOLDINGS
7 Return to Table of Contents
PART # FOR PANELING SIZERN 378 3/16"RN 378-A 5/32"RN 378-B 1/8"
RN 1056 5/32"RN 484 1/4"
PART # FOR PANELING SIZERN 1196 3/8"RN 630 1/2"
SHELF TOP
RADIUS F MOLDING - EXTENDED LEG
F MOLDING - OUTSIDE CORNER
RADIUS F MOLDING - OUTSIDE CORNER
PART # FOR PANELING SIZERN 456 1/8" 3milRN 380-B 1/8" 3milRN 380 5/32" 4milRN 1055 5/32" 4milRN 456-A 3/16" 4.7mil
PART # FOR PANELING SIZERN 838-A 7/64"RN 239-A 1/8"RN 239 5/32"RN 838 5/32"RN 528-A 7/32"RN 528 1/4"RN 326 1/4"RN 326-A 3/8"RN 1001 1"
8 Return to Table of Contents
CAP MOLDING - RIGID P.V.C.
PART # GAP SIZE LEG SIZE PART # GAP SIZE LEG SIZE
9 Return to Table of Contents
PART # SIZE
RN 486 1/4"
RN 821 5/32"
RN 607 1/8"
PART # GAP SIZE
FN 309 1/16"
FN 576 1/8"
PART # GAP SIZE
PN 139 5/32"
J MOLDING - END CAP - RIGID P.V.C.
J MOLDING - END CAP - POLYETHYLENE (SEMI-RIGID)
J MOLDING - END CAP - FLEXIBLE P.V.C.
INSIDE CORNER MOLDINGS
10 Return to Table of Contents
SINGLE DIVIDER BARS - RIGID P.V.C.
PART # SIZE
DIVIDER BARS - RIGID P.V.C.
PART # SIZE PART # SIZE
RADIUS DIVIDER BAR - RIGID P.V.C.
PART # SIZERN 363 3/16"
ANGLED DIVIDER BAR - RIGID P.V.C.
PART # SIZE
RN 121-H 5/32"
11 Return to Table of Contents
CURTAIN - DOOR TRACKS
PART #
RN 383 Curtain TrackRN 690 Curtain TrackRN 690-A Curtain Track
RN 436 Curtain TrackRN 995 Curtain Track
RN 465 Door Track
RN 466 Door Track
RN 469 Curtain Track
RN 621 Curtain TrackRN 672 Curtain Track
13 Return to Table of Contents
THRESHOLD / PLUMBING COVER
PART #
RN 402 3 1/4" Threshold CoverRN 896 3 29/64" Threshold Cover
RN 972 4 3/4" Plumbing Cover
WINDOW FILLETS
PART #
PART #
RN 685 Wire Raceway BaseRN 739 Wire Raceway BaseRN 1058 Wire Raceway Base for RN 1057
RN 686 Wire Raceway Cover for RN 685 and RN 739RN 1057 Wire Raceway Cover for RN 1058
RN 990 Chassis RacewayRN 990-A Chassis Raceway (No Divider)
RACEWAY
14 Return to Table of Contents