Catalog & Manual
Dentium Instrumentsfor Total Solution
IndexSurgical Guide Polymer Guide 04 Implant Guide 06
Sinus Instruments DASK 11 Osteotome Kit 16 Sinus Elevator 17
GBR Instruments RS Kit 19 GBR System 24 Harvest Drill 35
Others Help Kit 38 Temporary Shell 45 Dental Maintenance Tips 48
Polymer GuideImplant Guide
Surgical Guide
4
Dentium Instruments
Polymer GuideThermoplastic Surgical Template for Dental Implant Placement
• Fabricate precise surgical template in just minutes using hot water• Disposable material to promote control of infection and contamination• Titanium sleeve is compatible with Dentium Guide and Final Drills
Thermoplastic surgical templateFabricate an accurate surgical template
in just minutes, greatly reducing the lab and chairside time.
Suitable template shapePolymer Guide is designed to maximize contact
area over the adjacent teeth while allowing substantial field of view during implant surgery.
Fully compatible with Dentium Drill System
Improved infection/contamination controlTo ensure infection/contamination-free surgery every time, the Polymer Guides are made to be disposable.
Drill a hole in the stone model Apply of Polymer Guide on stone model
Insert the Guide Pin
Remove the Guide Pin
Soak the Polymer Guide in hot water above 65°C to soften up the material for easy molding.
Position the Polymer Guide intra-orally for drilling
Polymer Guide
5
Dentium Instruments
[ Unit: mm, Scale 1 : 1 / mm ]
Single Standard (5ea)
PGSSK PGSCK
2.5 T
22
35
22
45
2.5 T
7* Average mesiodistal
width of a tooth* 1 fixed sleeve + 3 additional Sleeve holes
T Art. No.
2.5 XSG 34 35 S
Cantilever Multi-Ready (5ea)
T Art. No.
2.5 XSG 34 45 C
Stone Drill XGD 23 60 (1ea)
Guide Pin XGP 34 23 S (5ea)
Guide Drill Brushing (First) XPGB 19 26 (1ea)
Guide Drill Brushing (Second) XPGB 26 34 (1ea)
Additional Metal Sleeve(for Cantilever Multi-Ready) XPGS 34 25 A (5ea)
Polymer Guide
6
Dentium Instruments
Surgical guide utilizing silicon spacer and unique parallel pin
• The tripod parallel pin is designed to take into consideration the mesiodistal width and drilling position in the edentulous area
• Parallel pins and Spacers are configured based on the average width of a tooth
Spacer + Guide Drill Ellipse Parallel Pin Final prosthesis
Spacer + Guide Drill Final prosthesisEllipse Parallel Pin + Tripod Parallel Pin
Implant Guide
Assist in the implant positioning as well as determining the width and the position of
the prosthetic components
The Guide Drill holes on the Tripod Parallel Pin help in prepping the
osteotomy in the correct orientation
The three legs of the Tripod Parallel Pin are of different lengths to accommodate varying widths of prosthesis for multiple unit bridges
Implant Guide
7
Dentium Instruments
Guide Drill
Spacers
Ellipse Parallel Pins (x2)
Tripod Parallel Pins
XLD 22 35S
XLDSP 60S
XPP 2226 50G
XLDSP 70S
XPP 2226 70G
XLDSP 80S
XPP 2226 90G
XLDSP 90S
XPP 2226 11G
XLDSP 10S
Kit Contents
ISGK
6 7 8 9 10
14
16 15
XPP 2226 1416G XPP 2226 1719G
17
19 18
GUIDEØ2.2
Ø6.0
4.0 / 5.0 6.0 / 7.0 8.0 / 9.0
ELLIPSE PARALLEL PIN
14
16 15
17
19 18
10.0 / 11.0
Ø7.0 Ø8.0SPACER
Ø9.0 Ø10.0
4 6 8 10
Implant Guide
8
Dentium Instruments
Spacers
Ellipse Parallel Pins
6
6
7
7
8
8
9
9 6.0
10
10
5
4
7
6
9
8
11
10
Diameter Art. No.
Ø 6 XLDSP 60S
Ø 7 XLDSP 70S
Ø 8 XLDSP 80S
Ø 9 XLDSP 90S
Ø 10 XLDSP 10S
Diameter Art. No.
Ø 4 / Ø 5 XPP 2226 50G
Ø 6 / Ø 7 XPP 2226 70G
Ø 8 / Ø 9 XPP 2226 90G
Ø 10 / Ø 11 XPP 2226 11G
Tripod Parallel Pins
Width Art. No.
14 / 15 / 16 XPP 2226 1416G
17 / 18 / 19 XPP 2226 1719G
2
Ø 2.3
8
2.5
8
4 6 8 10
8
2.5
8
1417
16
19
15
18
Implant Guide
9
Dentium Instruments
Single Case
Multiple Case
Guide Drill Combination of Guide Drill and Spacer
Ellipse Parallel Pin
Dual Abutment Connection
Dual Abutment connection
Guide DrillCombination of Guide Drill and Spacer
Guide DrillApplication of Tripod and Ellipse Parallel Pin
Fixture placement with Healing AbutmentSuperLine FX5010
Fixture placement with Healing AbutmentNR Line NFX3611S / NFX4311S / NFX5011S
Final Drill Ø 3.6 ~ Ø 5.0
Final prosthesis
Final prosthesis
8
8
18
17
19
Manual
Incision
CountersinkØ 5.0
Final DrillingØ 3.0 ~ Ø 5.0
Implant Guide
10
Dentium Instruments
DASK Osteotome KitSinus Elevator
Sinus Instruments
11
Dentium Instruments
Dentium Advanced Sinus Kit (DASK)• Simple & easy access to sinus cavity • Broad exposure of bony walls with special instruments
* DASK Drill #1~5 : Drill speed 800 to 1,200 rpm, 30~45N∙cm with internal irrigation DASK Drill #6 : Drill speed 800 to 1,200 rpm, 30~45N∙cm with external irrigation
DASK Drills
Stoppers | for XRT332035, XRT372035, XED331035D
Type DASK Drill # REF
Crestal Approach
DASK Drill # 1 XRT 332035
DASK Drill # 2 XRT 372035
DASK Drill # 3 XED 331035D
Lateral Approach
DASK Drill # 4 XRT 064025
DASK Drill # 5 XRT 084025
DASK Drill v# 6 XRT 083025
Drilling Depth L REF
08 10.6 XFDST 08
06 12.6 XFDST 06
04 14.6 XFDST 04
02 16.6 XFDST 02
XRT332035
XRT372035
XED331035D
XRT064025
XRT084025
XRT083025
[ Unit: mm, Scale 1 : 1.2 / mm ]
Ø3.3
12 10 8 6 4 2 0
12 10 8 6 4 2 0
Ø3.7
12 10 8 6 4 1 0
Ø3.3Ø1.6
Ø4.0
Ø6.0
Ø8.0
Ø1.5
Ø8.0Ø6.6
Ø1.5
[ Unit: mm, Scale 1 : 1 / mm]
Ø5.14Ø5.14
Ø5.14Ø5.14
10.616.614.612.6
XFDST08 XFDST06 XFDST04 XFDST02
DASK
12
Dentium Instruments
Sinus Elevation Instruments
The distance from the alveolar crest to the sinus floor should be measured on x-rays prior to surgery. Site preparation is performed with final drills in sequence up to 1mm short of the sinus floor. Then DASK Drill #1 or #2 is used and the sinus floor is carefully approached with light apical pressure. When you feel the yielding of the sinus floor, remove the drill. Or, partial preparations with DASK Drill #1 or #2 and up-fracture with osteotomes can be performed.
When the sinus cavity is accessed, DASK Drill #3 is introduced and a much broader detachment from the sinus floor can be facilitated horizontally with hydraulic pressure thanks to the internal irrigation hole.
DASK Drill #3 can also be used for a lateral approach surgery.
* The internal irrigation not only provides a cooling effect, but also adds hydraulic pressure to slightly lift the sinus membrane during drilling.
DASK Drill #1XRT332035
DASK Drill #2XRT372035
DASK Drill #3XED331035D
[800~1,200 rpm]
Drills for Crestal Approach
REF XSE1L
REF XSE2L
REF XSE3L
REF XSE4L
[ Scale 1 : 0.68 / mm ]
DASK
Sinus Bur Kit
SDK
[800~1,200 rpm]
13
Dentium Instruments
DASK Maintenance
• Please follow for legal regulations, as well as hygienic guidelines to prevent contamination and infection.
• Please remember that you are responsible for the maintenance and sterility of your medical/dental products/device.
• It is important to use and follow, proper cleaning, disinfection and sterilization procedures.
• It is also important to follow the manufacturer’s recommendation on use of drills.
• Please keep a log as to how many times the drills were used.
• Drill usage is determined by surgical site not per patient. Bone density and usage determine the life of the drills .
• Drills should be considered for replacement after approximately 15- 20 uses based on bone density. Check drills frequently for wear.
To make a lateral window through the antrostomy (thin-out) approach.
To make a lateral window through the wall-off technique.
* DASK Drill #6 is used to cut and detach a bony island like a trephine bur from the lateral wall. Uncontrolled overdrilling may lead to sinus perforation and possible damage to the membrane. External irrigation is necessary when drilling.
* DASK Drill #4 or #5 is used to prepare a lateral sinus window using light pressure and rotating stokes. The DASK Drill #4 or #5 is designed to minimize the risk of sinus membrane perforation.
DASK Drill #5XRT084025
DASK Drill #6XST083025
DASK Drill #4XRT064025
Drills for Lateral Approach
1. All instruments, immediately after use, must be presoaked for a few minutes in a germicidal bath to loosen and prevent debris from attaching to instruments. Do not soak overnight.
2. Scrub with a soft brush to remove any debris.
3. For internal irrigation drills, use a reamer or small gauge needle to internally cleanout the drills.
4. Before using an ultrasonic cleaner, wrap drills in a 2 x 2 gauze to prevent rubbing against each other.
5. Rinse thoroughly with warm water.
6. Clean all instrument trays with a germicidal cleaner prior to replacing instruments in kit.
7. Dry completely and place back into kit.
8. Always check for damage or corrosion after rinsing and drying.
9. Seal the tray in a sterilization pouch.
10. Sterilize using a steam autoclave in 121°C/250F for 30 minutes or refer to manufacturer’ s recommendations.
11. Store in a dry area at room temperature.
[800~1,200 rpm] [800~1,200 rpm]
Sterilization and Instrument Care Procedures
DASK
14
Dentium Instruments
Crestal Approach (Sinus Lifting)
After Ø3.8 Final drilling, eliminate the residual bone (1mm) using a DASK Drill #1 or #2 (in hard bone) until you feel a slight drop.
Fill the sinus cavity with [OSTEON™ Lifting] graft material.
Fill and distribute OSTEON™ graft material evenly throughout the achieved space.
Placement of implant into the osteotomy
Detach sinus membrane using the dome-shape sinus curette.
Detaching the sinus membrane to createadequate space for graft material.
Manual DASK
15
Dentium Instruments
Wall-off Technique
Thin-out Technique
Lateral Approach (Sinus Elevation)
DASK Drill #6 is used to cut a round bony island from the lateral wall like a trephine bur. Start to drill at a desired location and proceed until you see the shadow of the sinus membrane. Then, separate and lift the bony island up from the neighboring wall with a molt curette or a periosteal elevator. The bony island is repositioned back in its original position after bone augmentation.
The first laser mark is 1.5mm and the second is3.0mm. Overdrilling can cause sinus perforationand possible damage to the membrane.
Detach sinus membrane using the dome-shape sinus curette.
Elevate the sinus membrane to create adequate space for graft material.
Elevate the sinus membrane to create adequate space for graft material.
Fill the obtained space with [OSTEON™ Sinus] graft material.
The bony island can be repositioned after bone augmentation. Implant placed (SuperLine).
Thin down the lateral wall with DASK Drill #4 or #5 at a 45 degree angle to reachthe Schneiderian Membrane.
Move the DASK Drill #4 or #5 mesiodistallywith a gentle pressure until you get the desired shape and size of the window for bone augmentation.
DASKManual
16
Dentium Instruments
Osteotome Kit• Osteotomes compress the bone laterally, providing denser bony interface rather than removing valuable bone from
the surgical site.
Osteotomes | Final drill type
[ Unit: mm, Scale 1 : 0.4 / mm]
ØBØA
XOF 20 A1
XOF 34 A1
XOF 38 A1
XOF 43 A1
XOF 48 A1
Type Art No ØA ØB
XOFKA
(Convex)
XOFK 20 A1 Ø1.7 Ø2.8
XOFK 34 A1 Ø2.3 Ø2.8
XOFK 38 A1 Ø2.7 Ø3.2
XOFK 43 A1 Ø2.8 Ø3.8
XOFK 48 A1 Ø3.0 Ø4.3
XOFBKB
(Concave)
XOFK 20 B1 Ø1.7 Ø2.8
XOFK 34 B1 Ø2.3 Ø2.8
XOFK 38 B1 Ø2.7 Ø3.2
XOFK 43 B1 Ø2.8 Ø3.8
XOFK 48 B1 Ø3.0 Ø4.3
Type A(Convex)
Type B(Concave)
Osteotome Kit
17
Dentium Instruments
Sinus Elevator
Balloon inflation size(mm)
Injection Volume(cc)
• Makes the sinus lift easy and drastically reduce the possibility of membrane perforation.• Balloon expansion of 0.5cc saline equals 6mm of membrane elevation.
6.0~6.5mm
0.5cc injection = Ø 6mm~6.5mm
4.0mm
Detach the sinus membrane to create adequate space for graft material.
Elevate the sinus membrane through the balloon inflation.
Carefully insert the Sinus Elevator into the osteotomy.
Use [OSTEONTM Lifting] graft material to fill the sinus cavity.
Expand the balloon progressively. Placement of implant in the osteotomy.
Sinus Elevator
6.0, 1.0 X 6-lines
Ø3.70
Type Art. No.
Including Syringe GSB38
Balloon Only GSB38B
18
Dentium Instruments
RS Kit GBR System
Harvest Drill
GBR Instruments
19
Dentium Instruments
Ridge Spreader (RS) Kit• Allows the achievement of space for implantation through the spreading of the bone with chisel and without drilling• There are three types of Ridge Spreaders to create space up to Ø4.5• Convenient surgeries due to the compatibility with hand-piece and ratchet• Easy-to-use kit component
RS Kit
20
Dentium Instruments
XRSK
Kit contents
RS Kit
Bone Chisel XBC305013
Ratchet XRCA1
Ridge Spreader Drills RS142435
RS203235
RS263635
Round Bur RS263635
Ratchet Adapter XRA3917
Mini Saw XDS8025
21
Dentium Instruments
Diameter L Art. No.
Ø1.4 / Ø2.4 35 RS142435
Ø2.0 / Ø3.2 35 RS203235
Ø2.6 / Ø3.6 35 RS263635
Diameter L Art. No.
Ø4.0 35 XRB4035
Diameter L Art. No.
Ø8.0 25 XDS8025
Art. No. XRA3917
Art. No. XRCA1
Art. No. XBC305013
35
17
25
Ø1.4
Ø8.0
Ø2.4
Ridge Spreader Drills
Round Bur
Mini Saw
Ratchet Adapter
Ratchet
Bone Chisel
[ Unit: mm, Scale 1 : 1 / mm ]
[ Unit: mm, Scale 1 : 0.6 / mm ]
RS Kit
35
Ø2.0Ø3.2
35
Ø2.6Ø3.6
35
Ø4.0
22
Dentium Instruments
RS Kit + NR Line + OSTEON™ II + Collagen Membrane
Incision
Expansion with Ridge Spreader (20~60rpm / 30~45 N∙cm) - Expanding alveolar bone ridge to make space for fixture
Fixture placement NR Line 3609W
Decortification
Cover Screw connection
Expansion with Bone Chisel
Application of graft material OSTEON™ ll
RS KitManual
23
Dentium Instruments
Barrier membrane applicationCollagen Membrane
Suture
Dual Abutment connection Final prosthesis
Healing Abutment connection
RS KitManual
24
Dentium Instruments
Guided Bone Regeneration (GBR) SystemGuided Bone Regeneration
• Allows the implantation of the GBR Technique with greater convenience• Multi-function membrane screw for membrane and/or abutment/plate fixation• Both GBR Abutment and Healing Abutment may be used with corresponding Plates and Screws
GBR Plates
• Supports membrane to hold up the graft material at desired volume• Easy to bend and cut• May overlap up to 3 plates with each abutment
Membrane Screws
• Multi-function membrane screws for membrane fixation and/or abutment/plate fixation
Membrane Pins
• Membrane pins for membrane fixation and/or plate fixation
Straight
GBR Plates
Mandibular Total Osteotomy
Tripod-Groove
Matrix
GBR Abutment Technique Healing Abutment Technique
GBR System
25
Dentium Instruments
28
3.0
18
3.0 Top
Side0.3
4.5
4.5
4.5
32.7
3.0
30.5
21
5.0* The tripod-Groove Plates can be cut in desired length and be used like a Straight Plate
37
44
2.5
Ø 1.5
4.0
Ø 1.5
6.0
Ø 1.5
8.0
Ø 1.5
10.0
Ø 1.5
GBR Abutment Technique
GBR AbutmentØ3.5
Healing AbutmentØ4.0 - Ø9.5
Healing Abutment Technique
Top
Side0.3
18
0.3
Top
Side
28
Top
Side0.3
2.5
Ø 1.5
4.0
Ø 1.5
6.0
Ø 1.5
8.0
Ø 1.5
10.0
Ø 1.5
GBR System
26
Dentium Instruments
4.0A/H 6.0 8.0
3.7
A/H
5.5
[ Unit: mm ]
2.5
Ø 1.5
4.0
Ø 1.5
6.0
Ø 1.5
8.0
Ø 1.5
10.0
Ø 1.5
Mandibular Total Osteotomy Technique
GBR System
GBR Mandibular Total Osteotomy
27
Dentium Instruments
G/H Art. No.
2.0 GAB 35 20
[ Scale 1 : 1.5 / mm ]
G/H 2.0
Delivery Holder
2.0
Ø 3.5
GBR Abutment
* Compatible with the SuperLine Fixtures. Compatible with Tightening Tool: Screw Abutment Hex (3.2 hex). Use no more than 10N∙cm of torque when tightening the GBR Abutment to the fixture.
* Compatible with the SuperLine Fixtures. Use no more than 10N∙cm of torque when tightening the Healing Abutment to the fixture. Single use only.
H 5.0
G/H 3.0
Ø4.5
Healing Abutment
5.0G/H3.0
Ø 4.5
G/H H Art. No.
2.0 2.0 HAB 40 20 20 L
2.0 3.5 HAB 40 20 35 L
3.0 5.0 HAB 40 30 50 L
4.0 7.0 HAB 40 40 70 L
G/H H Art. No.
2.0 2.0 HAB 45 20 20 L
2.0 3.5 HAB 45 20 35 L
3.0 5.0 HAB 45 30 50 L
4.0 7.0 HAB 45 40 70 L
G/H H Art. No.
2.0 2.0 HAB 65 20 20 L
2.0 3.5 HAB 65 20 35 L
3.0 5.0 HAB 65 30 50 L
4.0 7.0 HAB 65 40 70 L
G/H H Art. No.
3.0 5.0 HAB 75 30 50 L
3.0 5.0 HAB 85 30 50 L
3.0 5.0 HAB 95 30 50 L
Diameter Ø4.0 Diameter Ø4.5
Diameter Ø6.5 Diameter Ø7.5 / 8.5 / 9.5
GBR System
GBR Products
GAB3520 and FX4510SW
HAB453050L and FX4510SW
28
Dentium Instruments
Straight
[ Scale 1 : 1.5 / mm ]
[ Scale 1 : 1 / mm ]
[ Scale 1 : 1 / mm ]
Tripod-Groove
Matrix
Type L T Art. No.
Straight18 0.3 GBP 18 04 S
28 0.3 GBP 28 06 S
Type L T Art. No.
Tripod-Groove 21 0.3 GBP 21 13 T
Type L T Art. No.
Matrix 44 0.3 GBP 44 99 T
Type L T Art. No.
Tripod-Groove 21 0.3 GBP 21 13 TH
Type L T Art. No.
Straight18 0.3 GBP 18 04 SH
28 0.3 GBP 28 06 SH
GBR Plates
Augmentation Height (A/H) Art. No.
4.0 GBP 40 37 M
6.0 GBP 60 37 M
8.0 GBP 80 37 M
[ Scale 1 : 1.5 / mm ]
MTO
28
3.0
18
3.0 Top
Side0.3
Top
Side0.3
4.5
4.5
18
0.3
Top
Side
28
Top
Side0.3
4.5
32.7
3.0
30.5
21
5.0* The tripod-Groove Plates can be cut in desired length and be used like a Straight Plate
37
44
4.0A/H 6.0 8.0
3.7
A/H
5.5
GBR System
29
Dentium Instruments
Membrane Pins
2.75
Ø 3.0
Ø 0.5
Pin Case | 10 pins per case
Membrane Screws
Screw Case | 10 screws per case
Membrane Pin with insertion tool
L Art. No.
2.75 GMT 2525 C
[ Scale 1 : 2 / mm ]
L Art. No.
2.5 GSC 15 02
4.0 GSC 15 04
6.0 GSC 15 06
8.0 GSC 15 08
10.0 GSC 15 10
L Art. No.
2.5 GSC 15 02H
4.0 GSC 15 04H
6.0 GSC 15 06H
8.0 GSC 15 08H
10.0 GSC 15 10H
[ Scale 1 : 1.5 / mm ]
can be used with GBR Abutment
GBR System
2.5
Ø 1.5
4.0
Ø 1.5
6.0
Ø 1.5
8.0
Ø 1.5
10.0
Ø 1.5
2.5
Ø 1.5
4.0
Ø 1.5
6.0
Ø 1.5
8.0
Ø 1.5
10.0
Ø 1.5
Ø 3.8
30
Dentium Instruments
Screw Drill GMD 1228
Hand-piece Insertion Tool Ratchet GST 26 H
Hand-piece Adapter XMAA1
Torque Wrench Adapter XMA 21 W
Screw / Membrane Pin Insertion Tool GST 85
Instruments
Kit Contents
GBRK
GBR System
31
Dentium Instruments
[ Unit: mm, Scale 1 : 1.5 / mm ]
10.0
Ø 1.2
Screw Drill
[ Unit: mm, Scale 1 : 0.7 / mm ]
GST 26H
GST 56
GST 85
COD
Screw / Membrane Pin Insertion Tools
Adapters | for Screw, Ball and GBR Abutments
2120
Ø 1.2
2.0
4.0
6.0
8.0 Assemble with Guide Drill Stopper
XLDST14 XLDST12 XFDST10 XFDST08
8.56.5
4.52.5
Compatible with Guide Drill Stopper
XLDST14 XLDST12 XLDST10 XLDST08
4.66.6
8.6 10.6
GBR System
Type Art. No.
Hand-piece XMAA1
Torque Wrench XMA 21W
Diameter Art. No.
Ø1.2 GMD 1228
Art. No.
GST26H
GST56
GST85
COD
32
Dentium Instruments
Case 1 OSTEON™ II Collagen + GBR Plate (Straight)
Fixation of Plate0.3mm thickness /18.0mm length plate
Fixation of PlatePlate with Membrane Screw
GBR Abutment connectionSuperLine : FX4510SE
Application of graft materialOSTEON™ II
Fixation of Collagen MembraneMembrane with pin
Fixation of PlatePlate with Membrane Screw
Suture
GBR SystemManual
33
Dentium Instruments
Case 2 OSTEON™ II Collagen + GBR Plate (Tripod -Groove)
GBR Abutment connectionSuperLine : FX4510SE
Application of graft materialOSTEON™ II
Fixation of Collagen MembraneMembrane with Screw
Fixation of PlatePlate with Membrane Screw
Suture
Fixation of Plate0.3mm thickness / Cut-out Tripod-Groove plate
Fixation of PlatePlate with Membrane screw
GBR SystemManual
34
Dentium Instruments
Case 3 OSTEON™ II + GBR Plate (Matrix)
GBR Abutment connectionSuperLine : FX4510SE
Application of graft materialOSTEON™ II
Suture
Plate placement0.3mm thickness / Cut-out Matrix plate
Fixation of PlatePlate with Membrane Screw
GBR SystemManual
Collagen Membrane placement
35
Dentium Instruments
Harvest Drill
Ø 3.35
Ø 4.4
Ø 6.14
Collect autogenous bone and prep osteotomy simultaneously and effectively using the specially designed drills, the Harvest Drills.
• Sharp, pointed tip to prevent drill chattering for precise drilling.• Drill stoppers applicable to control the depth of the drilling for safe and efficient bone harvesting, especially in the
buccal side of the ridge.• Recommended drill speed of less than 100 rpm / 50N∙cm helps preserve the vital autogenous bone.• Excellent clinical results may be achieved when harvested autogenous bone is combined with Osteon™ II.
8 101214
Ø 2.2
Ø 2.6
Ø 2.9
Ø 3.85
* Bone collection in the buccal side of ridge : 50~200rpm / 30~50N·cm
Diameter L Art. No.
Ø2.9 35 XFH 34 35
Ø3.35 35 XFH 38 35
Ø3.85 35 XFH 4335
Ø4.4 35 XFH 48 35
Diameter L Art. No.
Ø2.2 35 XFH 22 35
Diameter L Art. No.
Ø2.6 35 XFH 26 35
Harvest Drills
L Art. No.
15.9 XFHST04
35
35
35
35
35
35
15.9
Harvest Drill Stopper
First Guide Drill
Second Guide Drill
[ Unit: mm, Scale 1 : 1 / mm ]
4.0
Harvest Drill
36
Dentium Instruments
* During the 4.3/4.8 fixture insertion into the bone density of D3~D4, the 3.35/3.85 harvest drilling process can be skipped.
XLD 2235 XLD 2635
Harvest Drill(Final Drill)
FirstGuide Drill
Ø 2.2
SecondGuide Drill
Ø 2.6
XFH 3435
3.4
Ø 2.9
3.8
Ø 3.35
XFH 3835 XFH 4335
4.3
Ø 3.85
4.8
Ø 4.4
XFH 4835
Final Drill
1 [2]
1 - First Guide Drill1000 rpm / 30~45N·cm with irrigation
2 ~ 4 - Harvest Drill 30~100 rpm / 30~50N·cm without irrigation
2 3 4
Harvest Drill
37
Dentium Instruments
Help KitTemporary Shell
Dental Maintenance Tips
Others
38
Dentium Instruments
Help Kit• Easy solution for critical problems which may occur in the prosthetics process• 5 tools in 1 kit (Screw Remover / Abutment Hex Remover / Screw Tap Repair Fixture Remover /
Cover & Abutment Screw Remover)• Compatible with most dental implant products now available on the global market• Heavy duty with robust design and proven materials
XIH
33
25
L Art. No.
25 XRF S2S
35 XRF S2
L Art. No.
20 XRHR 20
25 XRHR 25
Screw Remover
Abutment Hex Remover
Help Kit
2520
39
Dentium Instruments
Type Art. No.
Tap XRSTR
11° Guide XRSG11
8 ° Guide XRSG8
Type Art. No.
Remover
XRFRTF
XRFRT
XRFRTO
Wrench XRFRW
L Art. No.
25 XRRHD
Screw Tap Repair
Fixture Remover
Cover & Abutment Screw Remover
Help Kit
25
11° 8°
252525
25
11° 8°
25
40
Dentium Instruments
ApplicationTo remove the remaining screw when the abutment screw is broken inside the fixture.
AdvantageEasy to remove the broken screw, as well as protect the internal threads of the fixture from being damaged.
Usage
1. Set the torque of the implant motor to 30~50 rpm in a CCW (counterclockwise) direction.2. Assemble the tool with the hand-piece.3. Run the motor while keeping the tip of the tool appropriately contacted with the broken screw until successfully
removed.
*Caution: Do not overload the tool with pressure; apply moderate pressure.
1
3
2
4
Dual Abutment Use the friction force of the tool rotating counterclockwise to remove the screw.
Allow the screw to gradually come out in a swaying motion.
Hand-piece torque: 30~50rpm / Reverse
Screw Remover
Help KitManual
41
Dentium Instruments
Application
To remove the remaining hex when the hex portion of an abutment is broken.
Advantage
Easy to remove the broken hex, as well as protect the internal threads of the fixture from being damaged.
Usage
1. Insert the tool inside into the remaining hex hole of the fixture inside. 2. Assemble the ratchet with the tool and rotate it in a CW (clockwise) direction to lock the tool tip with the remaining hex.3. Disengage the ratchet and remove the remaining hex by gently rocking the tool. 4. If necessary, the hole located in the upper portion of the tool may be used with the crown ejector (not included).
*Caution: Do not overload the tool with pressure; apply moderate pressure.
Abutment Hex Remover
1
3
2
4
Dual Abutment (Hex)
Once the tool is tightly locked to the hex remnant, disengage the ratchet. Gently rock the tool until the hex is successfully removed.
Rotate the tool clockwise so that the remaining hex gets tightly engaged to the tool.
Help KitManual
42
Dentium Instruments
ApplicationTo recreate the internal thread lines of the fixture when it is damaged.
AdvantageEasy to recreate the internal threads with the help of the guides corresponding to different internal angulation(8, 11 degrees) of the fixture.
Usage
1. Place the guide with corresponding degree to the fixture.2. Assemble the tap tool with ratchet.3. Start tapping using the tap tool with appropriate torque. 4. If excessive debris accumulates, pause tapping and remove using suction.5. Repeat steps 3 and 4 until completed.
*Caution: Do not apply excessive torque onto the tap tool. It is highly recommended to use the ratchet after the initial engagement of the tool and the internal threads.
Screw Tap Repair
IMPLANTIUM / SuperLine 11°
Tap with the guide attached. Remove the tool and the guide to suction the debris.
SimpleLine II 8°
*If excessive debris accumulates, pause tapping and remove using suction.
Help KitManual
1
3 4
43
Dentium Instruments
ApplicationTo remove the fixture when critically damaged with no other recovery options.
AdvantageEasy to remove the failed fixture without causing damage to the adjacent bone
Usage
1. Assemble the tool with ratchet, and insert it into the failed fixture to be removed.2. Gently rotate the ratchet in a CCW direction until the tool is tightly locked into the fixture.3. Continue to rotate the ratchet with greater torque in a CCW direction until the failed fixture is completely removed.4. Separate the tool from the removed fixture by rotating it in a CW direction. If necessary, use the wrench (included) to
hold the fixture while rotating the tool with ratchet in a CW direction.
*Caution: Sufficient irrigation should be applied to the tool to prevent excessive heating during the procedure.
Fixture Remover
IMPLANTIUM / SuperLine 11°
Art No. XRFRT Art No. XRFRTO
Rotate the tool in a counterclockwise direction until it is tightly locked into the fixture. Continue to rotate with additional toque untilthe failed fixture is completely removed.
Separate the tool from the fixture using the ratchet and the wrench that are included in the kit.
SimpleLine II 8°
Help KitManual
1
2~3 4
44
Dentium Instruments
Loading downwardCover Screw
Abutment Screw
Rotate the tool counterclockwise until tightly locked into the 1.28 hex of the cover screw.
Rotate the tool counterclockwise until tightly locked into the 1.28 hex of the abutment screw.
ApplicationTo disengage the cover screw, healing abutment and abutment screw from the fixturewhen the 1.28 hex on the head is stripped or damaged.
AdvantageEasy to disengage the cover screw, healing abutment and abutment screw with stripped or damaged hex.
Usage
1. Assemble the tool with the ratchet and place it over the damaged 1.28 hex of the cover screw, healing abutment or abutment screw that needs to be removed.
2. Gently rotate the ratchet in a CCW direction to tightly engage the tapered top of the tool into the damaged 1.28 hex. 3. Continue to rotate the ratchet in a CCW direction with greater torque until the cover screw, healing abutment or
abutment screw is completely removed.
4. After the removal, rotate the ratchet in a CW to separate the tool and the removed component.
Cover & Abutment Screw Remover
Help KitManual
1
3
2
4 Loading downward
45
Dentium Instruments
Temporary ShellPre-fabricated Temporary Crown
• Aesthetic appearance that mimics the natural tooth• Single and Multi-restoration for easy scissor-trimmed concept
Jaw PositionArt. No.
Regular Wide
Maxilla
Posterior-Left TS 24 27 R TS 24 27 W
Anterior TS 13 23 R TS 13 23 W
Posterior-Right TS 14 17 R TS 14 17 W
Mandible
Posterior-Left TS 44 47 R TS 44 47 W
Anterior TS 33 43 R TS 33 43 W
Posterior-Right TS 34 37 R TS 34 37 W
3.0˚
InterproximalMin. Thickness 2.0
OcclusalMin. Thickness 0.5
Temporary Shell
8.27.0
8.0
7.8
7.8
10.2
9.4
9.8
10.6
7.6
7.6
7.2
5.5
5.7
Regular
8.67.5
8.4
8.2
8.2
10.8
9.8
10.5
11.2
8.0
8.0
7.7
5.8
6.0
Wide
46
Dentium Instruments
Contouring the lower surface of the crown to accommodate the emergence profile
Temporary Shell try-in
Healing
Placement of Temporary Shell
Fill acrylic resin into the Temporary Shell
Temporary Abutment Connection
Placement of the Temporary Shell
Temporary Abutment preparation
Temporary ShellManual
Temporary Shell
48
Dentium Instruments
Dental Maintenance TipsDisposable dental tips designed for the maintenance of dental implants including teeth grinding and polishing and plaque removal
Titanium Tips
Urethane Tip
Brush Tip
Type Part No.
Ti Brush GDMT-Ti 3.0
Type Part No.
Ti Brush GDMT-Ti 6.0
Type Part No.
Urethane GDMT-U
Type Part No.
Nylon Brush GDMT-B
39
22
Ø3
3
Ø2.35
17
35
12.5
8.6 Ø2.35
31.5
8.5
Ø6.2 Ø4.2 Ø2.35
23
Ø1
39
22
Ø3
6
17
Ø1
Dental Maintenance Tips
Ø2.35
49
Dentium Instruments
Interdental Tips
Type Part No.
Nylon Brush GDMT-I-SSS
Type Part No.
Nylon Brush GDMT-I-M
Type Part No.
Nylon Brush GDMT-I-L
39
11
Ø2 Ø4Ø0.44
39
11
Ø3 Ø6Ø0.5
39
11
Ø4 Ø7Ø0.6
Dental Maintenance Tips
Ø2.35
Ø2.35
Ø2.35
DENTIUMLONG-TERMCLINICAL DATA
2002. 05. 17Pre-op
2002. 09. 04Post-op
2003. 03. 15Final prosthesis
2002 2003 2004 2005 2006 2007 2008
OVER A DECADE OF COMMITMENT TO THE BEST PRODUCTS FOR DENTISTS AND PATIENTS
2008. 04. 145 years
2013. 12. 0511 years
2013 2014 20152009 2010 2011 2012
11 YEARS
HEAD OFFICE3105 Trade Tower, 513 Yeongdong-daero, Gangnam-gu, Seoul, Korea 135-731 www.dentium.com / [email protected]
Specifications are subject to change without notice. Some of the products listed in this catalog may not be available in the market due to pending approval.
1412 [Rev.2]
Catalog & Manual
Dentium Instrumentsfor Total Solution