234 450507en/12.2013
Description
Conservatory awning W10
1 Cover panel
2 Ceiling supports
3 Shaft
4 Fabric
5 Lateral guidance with secudrive®
6 Front rail
ApplicationInternal sun shading system for shading conservatories,
patios roofs and pergolas with flat roof pitches.
For the first time in the field of sun shading with secudrive®
guiding of the awning fabric along the entire ordering length
by means of a spring steel strip directly in the guide rail.
When extending the awning the spring steel strip pushes the
fabric in the guide rails, leaving no light gap and achieving
optimum fabric tension.
OperationMotor
thermal protection and built-in capacitor comprised.
Torque overload protection: Motor switches off automati-
cally in the upper and lower limit posi-
tions
Voltage: 230 V AC
Frequency: 50 Hz
Degree of protection: IP 44
Connecting cable: 500 mm
Plug-in connector: Hirschmann coupling wired to motor
cable, comprised for customer connec-
tion, including enclosure
Radio motor or radio plug receiver (optional)
EWFS hand-held transmitter comprised, 1 channel
Cover panel (1)two-piece, closed at the front
Material: aluminium, extruded
Dimensions (w x h): 196 x 159 mm
Surface: powder-coated, anodising optional
Fixing: using a ceiling support
Note: A deviation of up to 3 mm is possible for the cover
panel closure.
Ceiling support (2)Material: stainless steel
Dimensions (w x h): 40 x 75.5 or 129 mm
Surface: plain
Shaft (3)Fabric shaft
Material: aluminium
Material thickness: 1.6 mm
Dimensions (Ø): 86.2 mm
Profile: groove tube
Surface: plain
Motor shaft
Material: aluminium
Material thickness: 1.6 mm
Dimensions (Ø): 70 mm
Profile: groove tube
Surface: plain
D22853
Fig. 347: Conservatory awning W10
1
2
4
6
5
3
450507en/12.2013 235
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Description
Conservatory awning W10
Fabric (4)Fabric qualities: Acrylic Standard/Lumera
Acrylic Perfora
Soltis 92
More information about fabrics on
Page 400
Designs: according to current WAREMA awning
collection
Special fabrics not included in our current awning collection
are only available upon request and at a surcharge.
Lateral guide (5)with secudrive® in rail
with mounting groove
Material: aluminium, extruded
Dimensions (w x h): 45 x 60 mm
Surface: powder-coated, anodising optional
Fixing: bracket, from page 249
A spring steel strip guides the fabric directly in the guide rail.
It can also be fixed to WAREMA patio roofs as well as
wooden and aluminium pergolas.
Lead profile (6)Material: aluminium, extruded
Dimensions (w x h): 65 x 45 mm
Surface: powder-coated, anodising optional
Fixing and connecting partswithin the awnings
Material: A2 steel or aluminium
ColoursPowder coating of aluminium parts with chrome-free pre-
treatment according to valid RAL CLASSIC colour chart
(except camouflage and luminous colours) or in DB colours
701, 702 and 703 as well as eight textured colours (W4914
- W4921), four anodized-look colours (WC31 - WC34) and
further colours according to WAREMA standard colour fan
(in WAREMA colour specification).
Other colour specifications, special colours or anodising are
available upon request and at a surcharge.
Checklist– Provide drawings of the conservatory or the patio roof or
provide a sketch and also a photo (if possible)
– Fabric colour and quality
– Frame colour (powder-coated or anodised)
– Type of guide rail bracket
– Determine position of drive (operation side of cover
panel in direction of movement)
– Arrange for supply of on-site cable
– Arrange for housing of plug connection
Safety instructions– In gyms, multi-purpose halls or similar, the awning must
be protected against shocks (ball games), impacts etc.
by appropriate features like fences, nets etc.
– Do not use in indoor pools due to the chlorine atmos-
phere.
– It is imperative that the installation instructions and the
relevant appendices are adhered to.
– Accident prevention regulations from trade associations
must be observed.
– Specifications of the manufacturers of dowels and fixing
materials must be observed.
– The fixing points have to be checked once a year!
Information on operation and electrical connection:
The following connection conditions must be taken into con-
sideration when controlling electronic motors:
1. It must be ensured that the drives are operated via
locked switching units. The drives switch to program-
ming mode if voltage is simultaneously applied to the up
and down running direction. In this case the built-in elec-
tronics lose their saved limit positions and await new pro-
gramming.
2. Switching devices with the so-called 3-wire conductor
technique (e.g. Rademacher timer Clip) cannot be used
because these devices draw their supply voltage from
the drive and the electronics in the motors do not build
up enough voltage.
If both conditions have been met, the electronic motors can
be operated with any roller shutter controller or bus system
(via actuators).
236 450507en/12.2013
Weights/run times/guide rail
Conservatory awning W10
Diagram for determining the run time of a conservatory
awning W10
How to read the diagram:
Awning with ordering length of 3500 mm and drive speed
of 17 rpm has a run time of approx. 38 sec.
Guide rail
Diagram for determining the weight of a conservatory
awning W10
How to read the diagram:
Awning with 4000 mm ordering length, 3000 mm order
width and Soltis 92 fabric has a weight of approx. 53 kg.
w04237v2
Fig. 348: Diagram for determining the run time for type W10
Guide rail 45x60mm (w x h)
KD050910001
Fig. 349: Guide rail
0 10 20 30 40
Run time in sec.
Ordering width in m
m
50 60 70 80
4000
3000
2000
1000
Drive 17 rpm
45
60
22.522.5
Gewicht_W10_Acryl
Gewicht_W10_Soltis
Fig. 350: Diagram for determining the weight of type W10
Acrylic fabric
0,01000 2000 3000 4000 5000 6000
10,0
20,0
30,0
40,0
50,0
60,0
70,0
80,0
90,0
Ordering width in mm
Weight in kg
1000 mm2000 mm3000 mm4000 mm
Soltis fabric
0,0
10,0
20,0
30,0
40,0
50,0
60,0
70,0
Weight in kg
1000 1500 2000 2500 3000 3500Ordering width in mm
1000 mm2000 mm3000 mm4000 mm
KD050910038v1
Fig. 351: Cover panel
158
196
239
65
45
61
450507en/12.2013 237
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Application examples/sizes/construction limit values/definitions
Conservatory awning W10
Application example
You can also use our free planning programme at
www.sonnenschutzplaner.de for planning the sun shading
control systems – configure the product and create a tech-
nical drawing for integrating into your plans.
Construction limit values in mm W10
Note:
Conservatory awnings type W10 are only available as indi-
vidual units, i.e. no coupled units and no motor/end bearing
situations are possible! Each awning requires 2 single guide
rails.
DefinitionsThe drive end or operation side is always seen from the
cover panel in extension direction.
Order width= from one guide rail fixing axis to the next fixing
axis = axial dimension
Guide rail bracket
Ceiling supports
kd050910002
Fig. 352: Application example
angled
Internal sun
shading sys-
tem
Type of fabric W10
W10 direction of
movement "from
bottom to top"
Max. width Acrylic – all variants – 6000 6000
Soltis 92 3500 3500
Min. width Acrylic – all variants – 600 600
Soltis 92 600 600
Max. length Acrylic – all variants – 4000 4000
Soltis 92 4000 4000
Min. length Acrylic – all variants – 950 950
Soltis 92 950 950
Max. surface
area (m2)
Acrylic – all variants – 24 24
Soltis 92 14 14
Roof pitch 0°–30° 0°–20°
Length (mm) Guide rail brackets per rail
up to 1799 2
1800 to 2899 3
2900 to 4000 4
Width (mm) Ceiling supports
up to 3999 2
4000 to 6000 3
238 450507en/12.2013
Measuring instructions and data sheet
Conservatory awning W10
kd050910003v1
Fig. 353: Conservatory awning W10
min. 300max. 500
30
159
224
239
min. 100max. 300
max. 1200
Order length
3
60
Roof pitc
h
Required space for mounting cover panels on
brackets
kd050910004v1
Fig. 354: Required space for mounting cover panels on brackets
1.5 6.5
min. 30 max. 90
min
. 40
159
450507en/12.2013 239
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Measuring instructions and data sheet
Conservatory awning W10
Attention: Order width = middle of guide rail – middle of guide rail. The entire awning (incl. side covers) is wider by
57 mm. Please note when ordering!
With units connected in series, it is possible to attach 2
guide rails with one bracket.
Individual unit
kd050910005_1v1
Units connected in series (mechanical coupling not possible)
kd050910005_2v1
Fig. 355: Measuring instructions for drives
(dimension including side cover)
4545
3
max.
4000
max. 6000 (acrylic)
max. 3500 (Soltis)
45
60
45
60
28.9
22.5
28.9
All dimensions in mmPossible drive position
min. 600 (motor)
Soltis fabric: max area 14 m²
Acrylic fabric: max area 24 m²
(dimension including side cover)
45
3
max.
4000
max. 6000 (acrylic)
max. 3500 (Soltis)
45
60
45
60
28.9
45
3
max.
4000
max. 6000 (acrylic)
max. 3500 (Soltis)
45
60
45
60
28.9
90
45
22.5
All dimensions in mmPossible drive position
min. 600 (motor)
Soltis fabric: max area 14 m²
Acrylic fabric: max area 24 m²
min. 600 (motor)
side covers omitted
240 450507en/12.2013
Mounting examples
Conservatory awning W10
With units connected in series, it is possible to attach 2
guide rails with one bracket.
Unit variations – symbolic illustration
KD050910007
Fig. 356: Unit variations W10
45
22,5
22,522,5
4545
90
60
60
2 x guide rail 45x60:
EM
Motor - end bearing situation
E E
End bearing - end bearing situation
MM
Motor - motor situation
Important: mechanicalcoupling not available!
Coupling situation
Motor - end bearing situation
ME
E
M
Guide rail 45x60: Motor situation
End bearing situation
Not possible with radio motor
BoxBox
BoxBox
BoxBox
BoxBox
Box
Box
450507en/12.2013 241
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Mounting examples
Conservatory awning W10
Overview of mounting situations – overview of brackets and ceiling supports see page 249f.
KD050910008_1
Fig. 357: Conservatory awning W10 on patio roof T1 – distance 6.5 mm – bracket no. 47 with ceiling support
KD050910008_2
Fig. 358: Conservatory awning W10 on patio roof T1 – distance 60 mm – bracket no. 101 with ceiling support
KD050910008_3
Fig. 359: Conservatory awning W10 on third-party product – distance 6.5 mm – bracket no. 48 with ceiling supportKD050910008_4
Fig. 360: Conservatory awning W10 on third-party product – distance 60 mm – bracket no. 101 with ceiling support
AA A BA B
242 450507en/12.2013
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on patio roof T1 – distance 6.5 mm
KD050910015
Fig. 361: Detail: Mounting W10 on patio roof T1 – distance 6.5 mm
KD050910009
Fig. 362: Detail: Mounting W10 on patio roof T1 – rafters protruding
min. 100
max. 300max. 1200
239
196
159
3Length of guide rail
60
224
min. 300
max. 500
Order length
min. 30
min. 5Order length
Attention: 4 to 10 mm
All dimensions in mm
450507en/12.2013 243
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on patio roof T1 – distance 6.5 mm
KD050910015v1
Fig. 363: Detail: Mounting W10 on patio roof T1 – distance 6.5 mm
KD050910011
Fig. 364: Detail: Mounting W10 on patio roof T1 – rafters flush
min. 100
max. 300max. 1200
239
196
159
3Length of guide rail
60
224
min. 300
max. 500
Order length
min. 30
min. 5Order length
All dimensions in mm
244 450507en/12.2013
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on patio roof T1 – distance 60 mm
KD050910016v1
Fig. 365: Detail: Mounting W10 on patio roof T1 – distance 60 mm
KD050910010
Fig. 366: Detail: Mounting W10 on patio roof T1 – rafters protruding
159
239
196 Length of guide rail 3
224
Order length
60
min. 300
max. 500 max. 1200
min. 100
max. 300
min. 30
min. 5Order length
All dimensions in mm
450507en/12.2013 245
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on patio roof T1 – distance 60 mm
KD050910016v1
Fig. 367: Detail: Mounting W10 on patio roof T1 – distance 60 mm
KD050910012
Fig. 368: Detail: Mounting W10 on patio roof T1 – rafters flush
159
239
196 Length of guide rail 3
224
Order length
60
min. 300
max. 500 max. 1200
min. 100
max. 300
min. 30
min. 5Order length
All dimensions in mmAll dimensions in mm
246 450507en/12.2013
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on third-party product – distance 6.5 mm
KD050910017v1
Fig. 369: Detail: Mounting W10 on third-party product – distance 6.5 mm
KD050910013
Fig. 370: Detail: Mounting W10 on third-party product
159
239
196 Length of guide rail 3
60
224
min. 300
max. 500 max. 1200
min. 100
max. 300
Order length
min. 30min. 5Order length
All dimensions in mm
450507en/12.2013 247
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Mounting examples
Conservatory awning W10
Detail: Mounting conservatory awning W10 on third-party product – distance 60 mm
KD050910018
Fig. 371: Detail: Mounting W10 on third-party product – distance 60 mm
KD050910014
Fig. 372: Detail: Mounting W10 on third-party product
196 Length of guide rail
300
min. 100
max. 300max. 1200
min. 300
max. 500
Order length
224
3
239
min. 30Order length
min. 5
All dimensions in mm
248 450507en/12.2013
Details
Conservatory awning W10
Guide rail fixation
Note:
It is imperative to observe the specifications of the manufac-
turers of dowels and fixing materials!
KD050910020
Fig. 373: Ceiling mounting
15
Obse
rve m
in.
thic
kness
!
The fixing material depends on the substructure!
Note minimum distance from
edge!
KD050910122
Fig. 374: Wall installation
35
Aluminium anglebracket 60x40x6
Note
min
imum
dis
tance fro
m e
dge!
90
120
3
The fixing material depends on the mounting substructure!
450507en/12.2013 249
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Guide rail brackets and ceiling brackets
Conservatory awning W10
Only for mounting on WAREMA patio roof T1
Bracket no. 47 (W10) Ceiling bracket for bracket 47
Bracket no. 101 (W10) Ceiling bracket for bracket 101
For mounting single guide rails in series-mounted units
Bracket no. 49 (W10) Bracket no. 51 (W10)
KD050910022
Fig. 375: Overview of guide rail brackets and ceiling brackets (mounting on patio roof T1)
250 450507en/12.2013
Guide rail brackets and Ceiling supports
Conservatory awning W10
Mounting on third-party product
Bracket no. 48 (W10) Ceiling bracket for bracket 48
Bracket no. 53 (W10) Bracket no. 52
Bracket no. 101 (W10) Ceiling bracket for bracket 101
For mounting single guide rails in series-mounted units
Bracket no. 49 (W10)
KD050910022
Fig. 376: Overview of guide rail brackets and ceiling brackets (mounting on third-party product)
450507en/12.2013 251
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Guide rail brackets and ceiling brackets
Conservatory awning W10
Mounting on WAREMA patio roof T1
Bracket no. 47 (W10) Ceiling bracket for bracket no. 47
KD050910023
KD050910027
Fig. 377: Guide rail brackets for mounting on T1, distance 6.5 mm Fig. 378: Ceiling supports for mounting on T1, distance 6.5 mm
Bracket no. 101 (W10) Ceiling bracket for bracket no. 101
KD050910025
KD 050910025
Fig. 379: Guide rail brackets for mounting on T1, distance 60 mm Fig. 380: Ceiling supports for mounting on T1, distance 60 mm
Z
Z
60
21.5
45
Order width22.5
39
31
60
9
8Ø172840
75.5
30
15
2040
48
3
Ø7
9
110
5090120
20
22.5 Order width
45
60
75
40
86
48
2040
30
2840
129
15
3
252 450507en/12.2013
Guide rail brackets and ceiling brackets
Conservatory awning W10
Mounting on WAREMA patio roof T1 – Coupled units
Bracket no. 101 (see Fig. 382) can also be used for mount-
ing series-mounted units on T1.
Mounting on patio roof with side glazing (Sunflex)
Attention!
When using this guide rail bracket it has to be mounted
before measurement of the side glazing (Sunflex).
Bracket no. 51 (W10)
KD050910033
Fig. 381: Guide rail brackets for coupled units (mounting on T1)
39
60
Order widthOrder width
45
==
21.5
31
60
9
8Ø17
M5
Brackets for side glazing by Sunflex (W10)
KD050910037
Fig. 382: Fixing W10 on T1 with side glazing (Sunflex)
55
6.5
55
5
12
100
55
5
Order width
450507en/12.2013 253
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Guide rail brackets and ceiling brackets
Conservatory awning W10
Mounting on third-party product
Bracket no. 48 (W10) Ceiling supports for brackets no. 48, 52 and 53
KD050910024v1
KD050910028
Fig. 383: Guide rail bracket for mounting on third-party product,
distance 6.5 mm, mounted on the guide rail at the factory
Fig. 384: Ceiling supports for mounting on third-party product, dis-
tance 6.5 mm
Bracket no. 53 (W10) Bracket no. 52 (W10)
KD050910040
KD050910118a
Fig. 385: Guide rail brackets for mounting on third-party product Fig. 386: Guide rail brackets for mounting on third-party product,
lateral fixing
940
40
Ø6
60
(8.5)14
22.545
Order width
5EPDM film 1.5 mm
6.5
pre-mounted bracket!
2840
75.5
48
3
6.5
712
88
60
22.5
45
Order width
6
4.5
22.5
84.5
80
18 22
90
120
9
20
Ø13
Ø7
17.5 = adjust-ment range
+10-10
90
40
90
60
22.5
45
60
6
9
25
6
14.5
Order width
90
120
25
40
7
20
20
254 450507en/12.2013
Guide rail brackets and ceiling brackets
Conservatory awning W10
Mounting on third-party product – Coupled units
Bracket no. 101 (W10) Ceiling bracket for bracket no. 101
KD050910026
KD 050910030
Fig. 387: Guide rail brackets for mounting on third-party product,
distance 60 mm
Fig. 388: Ceiling supports for mounting on third-party product, dis-
tance 60 mm
KD050910035v1
KD050910036
Fig. 389: Guide rail brackets for coupled units (mounting on third-
party product), distance 6.5 mm
Fig. 390: Guide rail brackets for Coupled units (mounting on third-
party product), distance 60 mm
110
20
Ø7 9
38.6 60
2040
5090
120
22.5 Order width
45
60
129
28
40
712
88
6.548
3
= Order width
6.5
=Order width
6.5
17
45
940
40
Ø6
EPDM film 1.5 mm
pre-mounted bracket!
90
110
80
8
60
Order widthOrder width
45
==
20
50
60
450507en/12.2013 255
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Description/measuring instructions
Conservatory awning W10
Direction of movement "from bottom to top"
Field of applicationInternal conservatory awnings W10 are fitted under glazing
and can be used with direction of movement "from bottom
to top".
Notes:
– Conservatory awnings W10 are only available as individ-
ual units, i.e. no coupled units and no motor/end bearing
situations are possible! Each awning section requires 2
guide rails of its own!
– Due to the cover panel opening in extension direction
there is an increased risk of the fabric becoming soiled.
– For construction limit values see page 237.
Order dataPlease specify clearly on the order form:
– W10 - direction of movement "from bottom to top"
– State roof pitch
Measuring instructions
KD050910019v1
Fig. 391: Measuring instructions for conservatory awning type W10 – direction of movement "from bottom to top". Mounting on T1
224
239
3
60
min. 100max. 300
min. 300max. 500
max. 1200
Order length
159
Roof pitch
approx. 20°
All dimensions in mm
256 450507en/12.2013
Fixing material
Conservatory awning W10
Fixing material on patio roof T1
Fixing material on aluminium
Fixing material on wood
Fixing material on steel
Designation Order no. Unit
Bracket no. 47 Quantity
Ceiling supports 503321 Quantity
Spacer for ceiling support 504097 Quantity
Screw DIN 933 M6x30 732014 Quantity
Washer DIN 9021 6.4 742006 Quantity
Slot nut M6 retractable M6 506043 Quantity
Designation Order no. Unit
Bracket no. 48 Quantity
Screw Chipboard screw with pan head A2 4.5x40 746119 Quantity
Ceiling supports 503321 Quantity
Screw DIN 7976 C 4.8x32 721006 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
Designation Order no. Unit
Bracket no. 48 Quantity
Screw Chipboard screw with pan head A2 4x60 746157 Quantity
Ceiling supports 503321 Quantity
Screw DIN 7976 C 4.5x50 790283 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
Designation Order no. Unit
Bracket no. 48 Quantity
Screw DIN 912 VA M5x40 730054 Quantity
Ceiling supports 503321 Quantity
Screw DIN 912 VA M5x25 790855 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
450507en/12.2013 257
Overview
Articulated arm
/cassette awnings
Accessories
Patio awnings
Pergola awnings
Patio roofs
Conservatory
awnings
Horizontal
awnings
Dutch canopy
awnings
Patio side screens
Sun sails/fabrics
Control systems
Fixing material
Conservatory awning W10
Fixing material on patio roof T1
Fixing material on aluminium
Fixing material on wood
Fixing material on steel
Designation Order no. Unit
Bracket no. 101 Quantity
Screw DIN 933 M6x16 732050 Quantity
Washer DIN 9021 6.4 742006 Quantity
Slot nut M6 retractable M6 506043 Quantity
Ceiling supports 503410 Quantity
Spacer for ceiling support 504097 Quantity
Screw DIN 933 M6x30 732014 Quantity
Washer DIN 9021 6.4 742006 Quantity
Slot nut M6 retractable M6 506043 Quantity
Designation Order no. Unit
Bracket no. 101 Quantity
Screw DIN 7976 C 4.8x32 721006 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
Ceiling supports 503410 Quantity
Screw DIN 7976 C 4.8x32 721006 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
Designation Order no. Unit
Bracket no. 101 Quantity
Screw DIN 7996 4.5x40 728011 Quantity
Washer DIN 9021 A2 5,3 742005 Quantity
Ceiling supports 503410 Quantity
Screw DIN 7996 4.5x50 790283 Quantity
Washer DIN 9021 5.3 742005 Quantity
Designation Order no. Unit
Bracket no. 101 Quantity
Screw DIN 933 VA M6x25 732013 Quantity
Washer DIN 9021 A2 6,4 742006 Quantity
Ceiling supports 503410 Quantity
Screw DIN 933 VA M6x25 732013 Quantity
Washer DIN 9021 A2 6,4 742006 Quantity