DESIGN AND FABRICATION OF FIRE FIGHTING ROBOT
SUBMITTED BY,K.DINESH
(10R21A0424)P.HARICHARAN
(10R21A0437)S.SANTOSH.A
(10R21A0449)V.KAUSHIK
(10R21A0460)
PROJECT GUIDE,Mr.P.RAMESH Mtech
Asst.Professor.,
PROBLEM:
Now a days if any fire accidents happens in Power
plants,Buildings,etc., the time and consumption of
human power is high.So there may be a possibility
of Heavy damage to human beings.
In order to save the human life by reducing time
and consumption,we are making the FFR(Fire
Fighting Robot).
INTRODUCTION:
The basic Aim behind the project is to diffuse the
fire on dangerous terrain of a Power plant, Chemical units,
Atomic hazardous area and others with the RF Remote
Controlled wireless Monitored Fire Fighting Mobile
Robot.
COMPONENTS:
Robot VehicleRF Transmitter and Receiver89c51 Micro controller Control CircuitDC MotorWater Tank
DC Motor-12v:
It is used to drive the vehicle in forward and backward direction.This motor is also used to
operate the gears for rotate the arms at the top of the vehicle.
Battery:
In our project we are using 12v-5Amps lead acid battery,It continously works upto 3hoursTank:
In our Project we use water as the medium to extinguish the fire.2litre water tank is located at the
top of the vehicle .
89c51 MP:
The 89C51 is a low-power, high-performance microcomputer Flash
Programmable and Erasable Read Only Memory (PEROM).
BLOCK DIAGRAM: Transmitter
RF EncoderHT12E
RF Encoder HT12E
RFTransmitter
STT - 433
RF Transmitter
STT - 433
SW1
SW1
SW2
SW2
SW3
SW3
SW4
SW4
RECEIVER: It is used to operate the Vehicle by means of Wireless operation with the help of Microprocessor circuit and it controls over 50 feet.
Receiver:
CIRCUIT-RF:
ADVANTAGE:Reduce Man Power.It Plays a vital role in electrical Fire Accident.Saves the Human life.
APPLICATIONS:1) Industries are using RF solutions for monitoring,
control, process, inventory tracking, data links and bar code reading devices.
2) Commercial wireless applications such as door announcers, security and access systems, gate control, remote activation, score board and paging systems.
3) Automotive companies employing RF for wireless remote control, remote keyless entry and safety applications
4) Consumer products including electronic toys, home security, gate and garage door openers, Intercom, fire and safety systems, and irrigation controllers.
THANK YOU