Diverless Bend Stiffener Connectors (DBSC)
Extensively field proven, tried and tested with designs tailored to suit all project requirements and provide safe and secure connection of bend stiffeners
The FES Diverless Bend Stiffener Connector (DBSC) enables quick, efficient and cost-effective installation of Bend Stiffeners in often very congested and confined spaces
FES DBSC PROVEN TRACK RECORD
Years of DBSC supply15Projects supplied globally85
Successful installations335+DBSC Assemblies ordered435+
Internal FPSO turretsINSTALLATION CONDITIONSFES has supplied DBSC for use in a wide range of installation conditions, including:
External FPSO turrets
Tri-pod catenary mooring systems
Semi submersible rigs
Fixed platforms
Existing field extensions & tie backs
Bolted Flange connection to I/J-TubeAutomatically latches to DBSC Male
Transfers load from Male to Structure
DBSC FEMALE
Bolted Flange connection to Bend StiffenerConnects to End Fitting/Pull-In Head
Latches into DBSC Female Transfers load from Bend Stiffener to Female
DBSC MALE
DBSC FEMALE
DBSC FEMALE
Interface Flange & Bolting
Lifting Points (4 off)
CAM Ring Assembly
CAM Ring Indicator
ROV Viewing Port
API 17H Hot Stab Receptacle
ROV Grab Handles
Latch Indicator
Hydraulic Cylinder
Latch Arm
Latch Arm Mount
Spring Cup
Anodes
Bellmouth
DBSC Female OD
VISUAL INDICATORS
LATCHES ENGAGEDLatch indicator shows 3 yellow bars.Cam Ring Indicator in SHUT position
LATCHES RETRACTED - INSTALLATIONLatch indicator shows 3 black bars.Cam Ring Indicator in SHUT position
LATCHES RETRACTED - DISCONNECTIONLatch indicator shows 3 black bars.Cam Ring Indicator in OPEN position
HYDRAULIC SYSTEMHydraulic pressure can be applied by:
SEO Management
ROV HOT STAB
An integrated Hydraulic Cylinder, operated by ROV Hot Stab
HARD PIPED
An integrated Hydraulic Cylinder, hard piped to an external location (subsea or topside).Can include subsea ball valve to also allow ROV hot stab connection
REMOVABLE CYLINDER
A removable Hydraulic Cylinder, operated by ROV and stored topside to extend service life.
DBSC MALE
END FITTING RELEASE SYSTEMSAutomatic End Fitting Release System
Patented system uses an FES End Fitting Adaptor, attached to the back of the End Fitting, to provide interventionless installation of the DBSC Male into the DBSC Female, and interventionless release of the End Fitting From the DBSC Male once connected.
• Automatic to connect Male DBSC to Female DBSC
• Automatic to release end fitting/pull in head from Male DBSC (Winch control only)
• Intervention to disconnect Male DBSC from Female DBSC (fully reversible)(this can be can be hard piped to topside to remove any need for ROV or Divers)
END FITTING RELEASE SYSTEMSMale Latch End Fitting Release System
Uses a similar CAM system to the DBSC Female to attach to grooves machined on the end fitting. No intervention needed to connect DBSC Male to Female, ROV Hot Stab used to release End Fitting from DBSC Male.
• Automatic to connect Male DBSC to Female DBSC
• Intervention to release end fitting/pull in head from Male DBSC (Diver/ROV Hot Stab)
• Intervention to disconnect Male DBSC from Female DBSC (fully reversible)
Provides short term protection to the area of the DBSC Female bore which interfaces with the DBSC Male, reducing the risk of damage, debris buildup and marine growth prior to DBSC Male installation.
Bespoke designs are tailored to each project requirement. Can be latched into position, strapped to the DBSC Female or hung off via messenger wire.
DBSC ANCILLARIESDBSC Female Short Term Bore Covers
Recommended when an extended period of time is planned between DBSC Female Installation and DBSC Male pull-in (e.g. where installed on a spare or future guide tube, or projects with a long period of wet storage).
Intended to keep the full DBSC Female assembly protected from impact, debris and marine growth until required for operation.
Can be latched into position or hung off via messenger wire.
DBSC ANCILLARIESDBSC Female Long Term Covers
Typically supplied as 4 metallic sections strapped into position,
the Long Term DBSC Male Coverprotect the DBSC Male from
damage from the sea bed, along with mitigating against impact,
debris and marine growth
DBSC ANCILLARIESDBSC Male Covers
The PVC polymer Short Term DBSC Male Cover prevents dirt and debris from damaging the
DBSC Male, and prevents Marine Growth in the short term.
Provided as standard with all Automatic DBSC Males, the DBSC Male Poppet Cover
prevents premature engagement of the poppets during handling
and shipping activities.
Bespoke I-Tube and J-Tube Spools to meet individual project requirements. Mitre Bends, Induction Bends and Concentric Reduction Spools can be supplied.
DBSC ANCILLARIESI-Tube and J-Tube Spools
To provide subsea installation of DBSC Females (typically fitted in drydock or shipyard environments) FES can incorporate a subsea installation clamp to DBSC Female, I-Tube or J-Tube Spool design.
DBSC ANCILLARIESSubsea Installation Clamps
DESIGN & ANALYSISFES International utilise highly qualified technical personnel and the latest software to design and analyse our products
A combination of calculations in accordance with industry standards, sophisticated computer software & the latest FEA programmesare utilised to achieve the necessary design parameters and a first class engineered solution to each client project specification.
DESIGN & ANALYSISFES International utilise highly qualified technical personnel and the latest software to design and analyse our products
All FES DBSCs are provided with a full structural and fatigue analysis and design report, in accordance with the latest industrystandards including NORSOK, DNVGL, AISC and ISO standards
The FES DBSC is fully accredited to API 17L1 (Specification for Flexible Pipe Ancillary Equipment), with our design methodology holding independent DNV Design Verification to API 17L.
MANUFACTURE, ASSEMBLY & TESTING
MANUFACTURE
All components are designed and manufactured by FES International and approved sub suppliers, ensuring that we retain control of product quality and material traceability.
ASSEMBLY & TESTING
In-house assembly and testing facilities ensure all test procedures and inspection & testing plans are strictly adhered to.
MANUFACTURE, ASSEMBLY & TESTING
FIT AND FUNCTION TESTING
A fit and function test, including fit up, function, pressure testing and continuity testing is carried out on all DBSC components, ensuring the integrity of pressure retaining parts, and the functionality of the DBSC Assembly during operation.
MANUFACTURE, ASSEMBLY & TESTING
SIMULATED INSTALLATION TESTING
A fit and function test, including fit up, function, pressure testing and continuity testing is carried out on all DBSC components, ensuring the integrity of pressure retaining parts, and the functionality of the DBSC Assembly during operation.
Our quality management system has been assessed and accredited
to ISO 9001:2015
QUALITY MANAGEMENTFurther illustrating our commitment to QHSE, our quality management
system has also been assessed and certified to the stringent industry
specification API Q1,.
Our health and safety management system has been assessed and
accredited to OHSAS 45001:2018
HEALTH & SAFETYFES has been assessed and
accredited to ISO 14001 certification for environmental management.
ENVIRONMENTAL
QUALITY, HEALTH & SAFETYFES places quality and safety at the heart of everything we do
KEY FEATURESFES Diverless Bend Stiffener Connector
• Accredited to API17L1 (Specification for Flexible Pipe Ancillary Equipment)
• Interventionless or ROV/Diver Intervention for connection.
• Topside/Diver/ROV Intervention for disconnection.
• Proven components and Latching Principles maintain positive locking.
• Mechanisms & Indicators to confirm installation and latch position.
• Adaptable to all Umbilical/Riser diameters, loads and I/J Tube dimensions.
• Utilises a minimum of moving parts.
• Maintenance free mechanism.
• Compact and lightweight construction.
• Minimal pull in force required.
• Designed for up to 40 year operational life without wear, fatigue or material failure
ContactUs
Phone00 44 (0)1670 524 960
Websitewww.fesinternational.com
Head OfficeMerchant Court,North Seaton Industrial Estate,Ashington,Northumberland,NE63 0YH
Fax00 44 (0)1670 524 970
Other LocationsMenara UOA Bangsar, Unit A-12-1, Block A, No.5,Jalan Bangsar Utama 1, 59000 Kuala Lumpur, Malaysia.
Rua das Marrecas, 39/602Rio de Janeiro RJZIP: 20031-120 Brazil
10 Anson Road#16-10 International PlazaSingapore079903