FF+E Package 3: Upholstered Seating Specifications
UCSD NORTH CAMPUS HOUSING, PHASE 1
Issue Date: 3/3/2009
Each furniture item scheduled in this specification manual is assigned a "key" code; each key code is cross-referenced on the corresponding furniture location plans.
Furniture Key Index
Key Description Type
A04a Sofa ApartmentA04b Sofa ApartmentA06a Upholstered Stool ApartmentA06b Upholstered Stool ApartmentA07a Upholstered Stool ApartmentA07b Upholstered Stool ApartmentA08a Upholstered Stool ApartmentA08b Upholstered Stool ApartmentA16a Sectional Sofa ApartmentA16b Sectional Sofa ApartmentA18b Sectional Sofa ApartmentA23b Long Sofa ApartmentP03 Sectional Corner Piece Lobby/PreP04 Sectional Armless Chair Lobby/PreP05 Upholstered Bench Lobby/PreP06 Upholstered Bench Lobby/PreP07 Upholstered Bench Lobby/Pre
University of California, San Diego Movable Furniture North Campus Housing, Phase 1: FF&E Pkg 3 123100 - 1 CJ Project No. 4943.01 March 3, 2009
SECTION 123100
MOVABLE FURNITURE
PART 1 - GENERAL
1.1 SUMMARY
A. This Section includes movable furniture as scheduled herein, to include:
1. Upholstered seating.
1.2 PERFORMANCE REQUIREMENTS
A. Support Capability: Able to support an evenly distributed 50-pound per square foot static load or 300-pound concentrated load without failure or other conditions that might impair furniture’s usefulness.
1.3 QUALITY ASSURANCE
A. Regulatory Requirements:
1. Provide upholstered furniture which complies with California Technical Bulletin No. 117.
2. Upholstered furniture foam components must meet or exceed ASTM D-3574 Standard Test Method for Flexible Cellular Materials.
3. All components must meet or exceed all applicable national standards for furniture safety and durability, including but not limited to the following:
a) ANSI/BIFMA X5.1, X5.5 and X5.7.
B. Forest Certification: Provide wood furniture produced from wood obtained from managed forests certified by a Forest Stewardship Council (FSC)- or Sustainable Forestry Initiative (SFI)-accredited certification body.
1.4 WARRANTY
A. Special Warranty: Manufacturer’s standard form in which the manufacturer agrees to repair or replace movable furniture that fails in materials or workmanship within the specified warranty period. Failures include, but are not limited to, the following:
1. Structural failures, including excessive deflection, that impair furniture’s usefulness.
2. Faulty operation of hardware.
3. Deterioration of finishes and other materials beyond normal wear.
B. Warranty Period: Not less than ten (10) years from Notice of Acceptance.
University of California, San Diego Movable Furniture North Campus Housing, Phase 1: FF&E Pkg 3 123100 - 2 CJ Project No. 4943.01 March 3, 2009
PART 2 - PRODUCTS
2.1 FURNITURE
A. Products: Subject to compliance with requirements, provide the product indicated, or equal, for each item scheduled herein.
2.2 MATERIALS
A. General: All materials, construction and finishing shall be of the highest quality to produce movable furniture that is equal or superior to the industry standard.
B. Wood Products, General: Provide materials that comply with WIC “Custom” quality standard unless otherwise indicated.
C. Adhesives, General: Do not use adhesives that contain urea formaldehyde.
D. VOC Limits for Installation Adhesives and Glues: Use installation adhesives that comply with the following limits for VOC content when calculated according to 40 CFR 59, Subpart D (EPA Method 24):
1. Wood Glues: 30 g/L. 2. Contact Adhesive: 250 g/L.
2.3 WOOD PRODUCT FABRICATION, GENERAL
A. Wood Product Grade: Unless otherwise indicated, provide WIC Custom grade construction complying with referenced quality standard.
B. Wood Product Moisture Content: Comply with requirements of referenced quality standard for wood moisture content in relation to ambient relative humidity during fabrication and in installation areas.
C. Fabricate wood products to dimensions, profiles, and details indicated.
2.4 UPHOLSTERED SEATING: SOFAS, ARMLESS CHAIRS, BENCHES
A. Frame: 1” upholstery grade hardwood plywood, glued and doweled joints; construction per WIC Custom quality standard.
1. Frame decking: Polypropylene webbing with Dacron cover.
2. Seat, back and arm frames are constructed individually.
B. Seat, Back and Arms: Tight/monolithic construction; no loose, semi-attached or attached cushions.
1. Seat and arms: 6” 22035CFR hybrid foam base, 1” 18024CFR hybrid foam top layer, ½” 21050CFR hybrid foam front and side layers.
2. Back: 2” 22035CFR hybrid foam base, 1” 18024CFR hybrid foam top and side layers.
3. Hybrid foam: 50% non-petroleum based Polyols, 50% petroleum-based Polyols. Non-petroleum based content shall be derived from a renewable resource such as soy.
University of California, San Diego Movable Furniture North Campus Housing, Phase 1: FF&E Pkg 3 123100 - 3 CJ Project No. 4943.01 March 3, 2009
C. Fabrication:
1. Seat, back and arms are foamed and upholstered individually.
2. All seams shall be reinforced, utilizing heavy duty, commercial quality thread of fiber compatible with upholstery fiber compositions.
3. All horizontal planes shall be parallel and level for full extent, and at 90 degrees with vertical planes for full extent of all intersections.
4. Foam shall be cut to crown at seams so that a consistent level at all horizontal and vertical planes is maintained upon foam compression with use.
2.5 SCHEDULES
A. Furniture Schedules: See following pages.
1. Item codes denoted on Schedules correspond with coded item locations on Drawings.
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A04a
Furniture Key: A04aDescription: Sofa
Type: Apartment
Product: Custom Lucy Sofa
Arm Height: 25 Seat Height: 18
Manufacturer: RT London
Procure/Install:
Style Number:
30 85 30X XWidthDepth Height
Outside Dims:
19 63X XInside Dims:
Brushed Aluminum Feet Sofa Fabric: T03
Arm Detail
Features / Finishes / Finish Locations
Furniture Specification Sheet: A04a Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A04a
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Mfr: Burch Fabrics GroupLocation Sofa
Type Graded-In RailroadGrade
Direction
T03
Qty:
Single Frame SofaTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid Foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A04a Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A04b
Furniture Key: A04bDescription: Sofa
Type: Apartment
Product: Custom Lucy Sofa
Arm Height: 25 Seat Height: 18
Manufacturer: RT London
Procure/Install:
Style Number:
30 85 30X XWidthDepth Height
Outside Dims:
19 63X XInside Dims:
Brushed Aluminum Feet Sofa Fabric: T04
Arm Detail
Features / Finishes / Finish Locations
Furniture Specification Sheet: A04b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A04b
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern: BijouLocation Entire Sofa
Type Graded-In RailroadGrade
Direction
T04
Qty:
Single Frame SofaTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid Foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A04b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A06a
Furniture Key: A06aDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
18 18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T05
Features / Finishes / Finish Locations
Furniture Specification Sheet: A06a Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A06a
Textile(s):
Notes:
Option(s):
Manufacturer DesigntexTextile Pattern Name: Bon BonLocation entire stool
Type Graded-In Up the boltGrade
Direction
T05
Qty: 1.5
Construction grade tubular cardboard at body of stoolBioflex Hybrid foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A06a Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A06b
Furniture Key: A06bDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T06
Features / Finishes / Finish Locations
Furniture Specification Sheet: A06b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A06b
Textile(s):
Notes:
Option(s):
Manufacturer DesigntexTextile Pattern Name: Pasa DobleLocation stool
Type Graded-In Up the boltGrade
Direction
T06
Qty: 1.5
Construction grade tubular cardboard at body of stoolBioflex Hybrid foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A06b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A07a
Furniture Key: A07aDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T07
Features / Finishes / Finish Locations
Furniture Specification Sheet: A07a Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A07a
Textile(s):
Notes:
Option(s):
Manufacturer DesigntexTextile Pattern Name: Samba Otra VezLocation stool
Type Graded-In Up the boltGrade
Direction
T07
Qty: 1.5
Submit shop drawingsConstruction grade tubular cardboard at body of stoolBioflex Hybrid foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A07a Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A07b
Furniture Key: A07bDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: Momentum
Procure/Install:
Style Number:
18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T10
Features / Finishes / Finish Locations
Furniture Specification Sheet: A07b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A07b
Textile(s):
Notes:
Option(s):
Manufacturer DesigntexTextile Pattern Name: Samba Otra VezLocation stool
Type Graded-In Up the boltGrade
Direction
T10
Qty: 1.5
Submit shop drawingsConstruction grade tubular cardboard at body of stoolBioflex Hybrid foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A07b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A08a
Furniture Key: A08aDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T08
Features / Finishes / Finish Locations
Furniture Specification Sheet: A08a Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A08a
Textile(s):
Notes:
Option(s):
Manufacturer AnzeaTextile Pattern Name: BrigadoonLocation entire stool
Type Graded-In Up the boltGrade
Direction
T08
Qty: 1.5
Construction grade tubular cardboard at body of stoolBioflex Hybrid foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A08a Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A08b
Furniture Key: A08bDescription: Upholstered Stool
Type: Apartment
Product: Custom Upholstered Stool
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
18 16X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Stool Fabric: T09
Features / Finishes / Finish Locations
Furniture Specification Sheet: A08b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A08b
Textile(s):
Notes:
Option(s):
Manufacturer DesigntexTextile Pattern Name: Samba Otra VezLocation entire stool
Type Graded-In Up the boltGrade
Direction
T09
Qty: 1.5
Construction grade tubular cardboard at body of stoolBioflex Hybrid foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesSingle vertical seam for upholstery with circular seam at topReinforced seams throughoutFinished weight: 20 lbs minimumMade in USASubmit shop drawings
Furniture Specification Sheet: A08b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A16a
Furniture Key: A16aDescription: Sectional Sofa
Type: Apartment
Product: Custom Lucy Left Facing Sectional
Arm Height: 25 Seat Height: 18
Manufacturer: RT London
Sectional Sofa- Left Facing
Procure/Install:
Style Number:
106 85 30X XWidthDepth Height
Outside Dims:
19 X XInside Dims:
Brushed Aluminum Feet Sectional Fabric: T03
Arm Detail
Features / Finishes / Finish Locations
Furniture Specification Sheet: A16a Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A16a
Textile(s):
Notes:
Option(s):Specified Option(s) DescriptionQuantityGanging option 1
Manufacturer Burch Fabrics GroupTextile Mfr: Burch Fabrics GroupLocation Entire Sofa
Type Graded-In RailroadGrade
Direction
T03
Qty:
3 individual framesTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid Foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A16a Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A16b
Furniture Key: A16bDescription: Sectional Sofa
Type: Apartment
Product: Custom Lucy Left Facing Sectional
Arm Height: 25 Seat Height: 18
Manufacturer: RT London
Sectional Sofa- Left Facing
Procure/Install:
Style Number:
106 85 30X XWidthDepth Height
Outside Dims:
19 X XInside Dims:
Brushed Aluminum Feet Sectional Fabric: T04
Arm Detail
Features / Finishes / Finish Locations
Furniture Specification Sheet: A16b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A16b
Textile(s):
Notes:
Option(s):Specified Option(s) DescriptionQuantityGanging option 1
Manufacturer Burch Fabrics GroupTextile Pattern: BijouLocation Entire Sectional
Type Graded-In RailroadGrade
Direction
T04
Qty:
3 individual framesTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid Foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A16b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A18b
Furniture Key: A18bDescription: Sectional Sofa
Type: Apartment
Product: Custom Lucy Right Facing Sectional
Arm Height: 25 Seat Height: 18
Manufacturer: RT London
Sectional Sofa- Right Facing
Procure/Install:
Style Number:
85 106 30X XWidthDepth Height
Outside Dims:
19 X XInside Dims:
Brushed Aluminum Feet Sectional Fabric: T04
Features / Finishes / Finish Locations
Furniture Specification Sheet: A18b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A18b
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern: BijouLocation Entire Sectional
Type Graded-InGrade
Direction
T04
Qty:
3 individual framesTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A18b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A23b
Furniture Key: A23bDescription: Long Sofa
Type: Apartment
Product: Custom 106" Wide Lucy Sofa
Arm Height: 24 Seat Height: 18
Manufacturer: RT London
106" Sofa
Procure/Install:
Style Number:
30 106 30X XWidthDepth Height
Outside Dims:
19 84X XInside Dims:
Brushed Aluminum Feet Sofa Fabric: T04
Arm Detail
Features / Finishes / Finish Locations
Furniture Specification Sheet: A23b Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
A23b
Textile(s):
Notes:
Option(s):Specified Option(s) DescriptionQuantityGanging option 1
Manufacturer Burch Fabrics GroupTextile Pattern: BijouLocation Entire Sofa
Type Graded-InGrade
Direction
T04
Qty: 0
3 individual frame sofaTight seat and backFull upholstered armsReinforced seamsBioflex Hybrid Foam4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USABeveled arm design at inside cornerReveal at base of arm to back of sofa. See sofa arm detail drawing for more information.Submit shop drawings
Furniture Specification Sheet: A23b Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P03
Furniture Key: P03Description: Sectional Corner Piece
Type: Lobby/Pre
Product: Lucy Corner Piece
Arm Height: Seat Height: 18
Manufacturer: RT London
Procure/Install:
Style Number:
30 30 30X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Fabric- T12
Features / Finishes / Finish Locations
Furniture Specification Sheet: P03 Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P03
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern Name: BijouLocation Entire Piece
Type Graded-In RailroadGrade
Direction
T12
Qty: 0
Tight seat and backDouble fell or reinforced seamsBioflex Hybrid foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USASubmit shop drawings
Furniture Specification Sheet: P03 Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P04
Furniture Key: P04Description: Sectional Armless Chair
Type: Lobby/Pre
Product: Lucy Armless Chair
Arm Height: Seat Height: 18
Manufacturer: RT London
Procure/Install:
Style Number:
30 24 30X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Fabric: T12
Features / Finishes / Finish Locations
Furniture Specification Sheet: P04 Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P04
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern Name: BijouLocation Entire Piece
Type Graded-In RailroadGrade
Direction
T12
Qty: 0
Plywood single frameTight seat and backReinforced seamsBioflex Hybrid Foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USASubmit shop drawings
Furniture Specification Sheet: P04 Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P05
Furniture Key: P05Description: Upholstered Bench
Type: Lobby/Pre
Product: Lucy Bumper
Arm Height: Seat Height:
Manufacturer: RT London
Upholstered Bench with Brushed Aluminum Feet
Procure/Install:
Style Number:
30 24 18X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Fabric: T11
Features / Finishes / Finish Locations
Furniture Specification Sheet: P05 Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P05
Textile(s):
Notes:
Option(s):
Manufacturer KnollTextile Pattern Name: FibraLocation Entire Bench
Type Graded-In Up the boltGrade
Direction
T11
Qty: 0
Reinforced seamsBioflex Hybrid foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USASubmit shop drawings
Furniture Specification Sheet: P05 Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P06
Furniture Key: P06Description: Upholstered Bench
Type: Lobby/Pre
Product: Lucy Bumper
Arm Height: Seat Height:
Manufacturer: RT London
Upholstered Bench with Brushed Aluminum Feet
Procure/Install:
Style Number:
30 24 18X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Fabric: T12
Features / Finishes / Finish Locations
Furniture Specification Sheet: P06 Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P06
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern Name: BijouLocation Entire Bench
Type Graded-In RailroadGrade
Direction
T12
Qty: 0
Reinforced seamsBioflex Hybrid Foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USASubmit shop drawings
Furniture Specification Sheet: P06 Page 2 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P07
Furniture Key: P07Description: Upholstered Bench
Type: Lobby/Pre
Product: Lucy Bumper
Arm Height: Seat Height:
Manufacturer: RT London
Procure/Install:
Style Number:
30 24 18X XWidthDepth Height
Outside Dims:
X XInside Dims:
Brushed Aluminum Feet Fabric: T13
Features / Finishes / Finish Locations
Furniture Specification Sheet: P07 Page 1 of 203-Mar-09
Furniture Specification UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
P07
Textile(s):
Notes:
Option(s):
Manufacturer Burch Fabrics GroupTextile Pattern Name: CaressLocation Entire Bench
Type Graded-In RailroadGrade
Direction
T13
Qty: 0
Reinforced seamsBioflex Hybrid foam (or equivalent)4" high, 1 3/8" diameter die-cast aluminum feet with oversized glidesManufactured in USASubmit shop drawings
Furniture Specification Sheet: P07 Page 2 of 203-Mar-09
University of California, San Diego Movable Furniture North Campus Housing, Phase 1: FF&E Pkg 3 123100 - 4 CJ Project No. 4943.01 March 3, 2009
END OF SECTION 123100
Textile Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
Item Key: T01
Product: Pattern: Holy CowColor: Custom to match Designer's sampleTangerine WhipST07-BK07
Contents: 100% Polyurethane
Width: 54
Repeat(s): none
Note(s): 100,000 double rubs
Manufacturer: Mitchell Group Fabrics
Item Key: T02
Product: Pattern: Holy CowColor: Seaside Blue
Contents: 100% Polyurethane
Width: 54"
Repeat(s): none
Note(s): 100,000 double rubs
Manufacturer: Mitchell Group Fabrics
Item Key: T03
Product: Mfr: Burch Fabrics GroupPattern: BijouColor: SprigNumber: 1005248
Contents: 100% Polyester w/ Crypton finish
Width: 54"
Repeat(s): None
Note(s): Passes Calif. 117, UFAC 1, NFPA 260Cleaning Code: W
Manufacturer: Burch Fabrics Group
Item Key: T04
Product: Pattern: BijouColor: Star FruitColor #: 1005237
Contents: 100% Polyester with Crypton finish
Width: 54"
Repeat(s): none
Note(s): Abrasion: 100,000 Double RubsCleaning Code: WPasses: Calif. 117, UFAC 1, NFPA 260
Manufacturer: Burch Fabrics Group
Textile Specifications Page 1 of 4 Carrier Johnson 03-Mar-09
Textile Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
Item Key: T05
Product: Pattern Name: Bon BonPattern Number: 2749-701Color: Marmalade
Contents: 100% Polyester with Crypton Finish
Width: 54"
Repeat(s): V- 1", H- 3/4"
Note(s): 5 year WarrantyNFPA 260A 75,000 Double Rubs
Manufacturer: Designtex
Item Key: T06
Product: Pattern Name: Pasa DoblePattern Number: 2657-904Color: Fiesta
Contents: 100% Polyester
Width: 55"
Repeat(s): V- 1 1/2" , H-none
Note(s):
Manufacturer: Designtex
Item Key: T07
Product: Pattern Name: Samba Otra VezPattern Number: 2885-703Color: Tiger Lily
Contents: 100% Polyester
Width: 55"
Repeat(s): none
Note(s):
Manufacturer: Designtex
Item Key: T08
Product: Pattern Name: BrigadoonPattern Number: 2218-06Color: Daisy
Contents: 100% Polyester with Infinity Treatment
Width: 54"
Repeat(s): none
Note(s):
Manufacturer: Anzea
Textile Specifications Page 2 of 4 Carrier Johnson 03-Mar-09
Textile Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
Item Key: T09
Product: Pattern Name: Samba Otra VezPattern Number: 2885-507Color: Pistachio
Contents: 100% Polyester
Width: 55"
Repeat(s): none
Note(s):
Manufacturer: Designtex
Item Key: T10
Product: Pattern Name: Samba Otra VezPattern Number: 2885-406Color: Azure
Contents: 100% Polyester
Width: 55"
Repeat(s): none
Note(s):
Manufacturer: Designtex
Item Key: T11
Product: Pattern Name: FibraPattern Number: K1105/2Color: Azure and Turquoise
Contents: 71% Cotton, 29% Polyester
Width: 54"
Repeat(s): 5" Vertical, 7" Horizontal
Note(s): 50,000+ Double Rubs
Manufacturer: Knoll
Item Key: T12
Product: Pattern Name: BijouPattern Number: 1005236Color: Tropic
Contents: 100% Polyester
Width: 54"
Repeat(s): none
Note(s): 100,000 DBL RubsCleaning Code: WPasses: Calif. 117, UFAC I, NFPA 260
Manufacturer: Burch Fabrics Group
Textile Specifications Page 3 of 4 Carrier Johnson 03-Mar-09
Textile Specifications UCSD NORTH CAMPUS HOUSING, PHASE 1 CJ Project No. 4943.01
Item Key: T13
Product: Pattern Name: CaressPattern Number: Color: Chestnut
Contents: 100% Polyester
Width: 54"
Repeat(s): none
Note(s):
Manufacturer: Burch Fabrics Group
Item Key: T14
Product: Pattern Name: KabukiPattern Number: 2794-301
Contents: 46% Rayon, 28% Cotton, 25% Polyester, 1% Nylon
Width: 56
Repeat(s): 8 3/4" Vertical, 7 1/2" Horizontal
Note(s): 50,000 DBL RubsCleaning Code: STeflon Finish10 Year Warranty
Manufacturer: Designtex
Item Key: T15
Product: Pattern Name: MontezumaPattern Number: 2475-702
Contents: 100% Nylon
Width: 54"
Repeat(s): none
Note(s): 250,000 DBL RubsCleaning Code: WS10 Year Warranty
Manufacturer: Designtex
Item Key: T16
Product: Pattern Name: CrossroadsPattern Number: 2895-701
Contents: 100% Recycled Polyester
Width: 56"
Repeat(s): 1" Vertical, 1 1/4" Horizontal
Note(s): 70,000 DBL RubsCleaning Code WSWarranty: 10 YearsSustainable Fabric Collection, recycled content
Manufacturer: Designtex
Textile Specifications Page 4 of 4 Carrier Johnson 03-Mar-09