PRAJ REFRIGERATION INDUSTRIES
FLAKE / SNOW ICE GENERATORS
FLAKE ICE MACHINE CUT VIEW
ADVANTAGES OF FLAKE ICE
Rapid cooling or mixing – Flake ice flow more than 1740 sq mtrs. Of cooling surface per metric ton.
Better product coverage– Flake ice flow more freely & provide greater contact area.
Greater product protection – Flake ice remain dry, packs well and cushions your product against damage during packing, storage & transportation.
Easily stored & distributed – Flake ice is dry on both sides & does not congeal or form into clumps. It will not freeze up in the bin or clog screw or pneumatic conveyors.
Longer storage life – Flake ice is sub-cooled to provide more than 80K-cal kg, when harvested. Sub-cooling can easily be adjusted in the field to (-) 18°C or lower. Melts slowly than block ice when exposed to atmosphere.
More economical – Flake ice can be manufactured with less energy than any other type of ice 4325 K-cal per hour per metric ton of ice with 16°C with inlet water.
Therefore flake ice has become the Best Preferred method of
cooling in many industries like
SEAFOOD INDUSTRY
POLYTRY & MEAT PROCESSING
CHEMICAL & DYES
CONSTRUCTION
AMUSEMENT PARKS
(SNOW WORLD)
PHARMACEUTICALS
All PRI flake ice generator ‘P’ models operate the same way. Only their physical size and consequent capacities differ. Each PRI flake ice generator is a vertical and double walled cylindrical evaporator. The cylinder remains stationary and central ice flaking rotor is attached with water ring and Drip shield revolve. Water is pumped into the top of the water distributor rotor and then distributed through the water rings onto inner freezing surface. A high velocity, very low temperature refrigerant (i.e. 15°C to (-) 30°C) continued between the cylinders walls freezes the almost water immediately. Then ice is sub cooled in the drying arc and then the tools shear the ice from the freezing surface without touching the wall. The ice falls out the bottom of the Ice-generator into the storage bin. No water is delivered with the ice because the drip shield deflects any excess water into a receiving pan from which it is re-circulated to make more ice. Ice thickness is adjusted by changing the speed of the rotor with variable speed pulley. Ice can be continuously produced without an attendant. In case of power failure, all water drains into the water recirculation tank. There is no danger of ice system freezing up.
SPECIALITIES
Very low maintenance as compared to other machines.
All water distribution system done with non-corrosive material.
Special design ensuring low wear and tear.
Widely accepted and used in CHEMICAL, SEAFOOD, CONSTRUCTION, AGRICULTURAL, PHARMACEUTICAL, MEAT and POULTRY industries.
Simple construction ensuring easy installation, operation and maintenance.
One year warranty against any manufacturing defect.
ECONOMICAL
Produces more ice than any other ice maker using comparable compressor 4325 K-cal/Hr, per metric tone of ice using 16°C incoming water uses less energy than block ice maker.
Operates simply even while unattended. Continuous production with no defrosting
cycles. Features simplified refrigeration controls
and piping. Reduces refrigeration losses with totally
enclosed, insulated fiberglass enclosure. Converts all water to ice without water loss. Saves space with compact design. Installs easily without factory supervision. Minimum maintenance. Standard equipments with each ice maker.
STANDARD FEATURES
Available in 9 models producing from 1 to 40 tons of ice per day.
Double walled, stress relived, stationary evaporator. No refrigerant seals to leak. Coded by the ASME as a pressure vessel.
Available with a solid carbon or stainless steel freezing surface.
Protection and safety features include Mechanical load limit switch, emergency stop switch, jog switch and inspection hatch safety switch and drive belt guard.
Machine available for shipboard installation to produce ice from seawater.
Polyurethane insulation enclosed in molded fiberglass covers.
Attached accumulator for complete gas-liquid refrigerant separation.
Stainless steel water make up tank & stainless steel investment ice removal tools & sealed bearings.
Approved by the US department of Agriculture for installation in food and marine industries.
Flake Ice Generator SpecificationsPump(HP
)
Motor(HP - RPM)
Capacity / 24 Hrs. (MT)
Height
(mm)
Width(mm)
Length(mm
)
Export WT
(Kgs.)
P-050 SS / --
1/30
¼ - 1440
0.9 to 1.4
900 650 965 300
P-100 SS / CS
1/20
½ - 1440
1.5 to 2.5
1150 850 1220
705
P-150 SS / CS
½ ½ - 1440
4.5 to 7.0
1350
850 1220
1100
P-200 SS / CS
½ 1 – 1440
5.0 to 11.0
1350
1450
2100
1850
P-300 SS / CS
½ 1 – 1440
7.0 to 15.0
1700
1450
2100
2010
P-400 SS / CS
½ 1 – 1440
10.0 to 18.0
2000
1450
2100
2605
P-500 SS / CS
½ 1 – 1440
15.0 to 23.0
2300
1450
2100
3100
P-600 SS / CS
½ 1.5 – 1440
18.0 to 25.0
2100
1950
2750
2875
P-900 SS / CS
½ 1.5 - 1440
20.0 to 40.0
2750
1950
2750
4950
Ammonia and Freon models available
PRAJ REFRIGERATION INDUSTRIES
Registered Office:S. No.: 38/4, Samarth Colony, Yashwant Nagar, Kharadi, PUNE – 411 014
Maharashtra (India)
Works:Gat No.: 313, At Post Shirswadi, Tal.: Haveli, Dist. PUNE – 411 007Maharashtra (India)
Tel. No.: (020) 65249542 (020) 66343794Fax No.: (020) 27010022Mobile : (0) 9890146817Email : [email protected]
Admin Office:A/203, “Durvankur” Bldg.,Nagar-Hadapsar Bye pass,Nr. Rakshak Nagar Phase – II,Kharadi, PUNE – 411 014