Flu
id T
ran
sfe
r S
yste
ms
9801 Gravois RoadSt. Louis, MO USA 63123-4205Telephone (314) 544-3700Telefax (314) 544-5373 email [email protected]
Economy Controls
A Computerized Portable 2 Wheel DispensingCart measures the amount of liquid dispensedwithin 1 part in 5000. The Liquid is transferredthrough a Stainless Steel Pump that is mountedon the cart frame. A small On Board Computermeasures the quantity from a built in scale, andprints a two part delivery ticket in Gallons andPounds. The delivery ticket also prints the cartSerial Number, Consecutive Ticket Numbers, andthe Container Identification Number with Dateand Time, for complete Data Management.
The Operator uses a Hand Held Remote toDispense and Print Tickets.
One piece Dry Disconnect Couplers provide bothLiquid Flow and Vapor Recovery, which insuresno leaks or fumes when Dispensing Chemicals.
Non ComputerizedDispensing Carts areavailble in a varietyof models andfeatures
Shown at left, a NonComputerized Systemwith Vapor RecoveryNozzle, and HighCapacity Pump
A simple Dispensing Cartwith an on board aircompressor and NozzleDispenses Food Products.
The container ispressurized using a OnePiece Disconnect Coupler,providing both air in andliquid out.
Portable Dispensing Carts
APDD
70DPNC
70DPC
(2)
A Portable 2 Wheel Dispensing Cart DispensesSolvent into factory machines.
Dry Disconnect Couplers allow the Operator toquickly and easily Connect and Disconnect thesystem for transport.
An Air Operated Diaphragm Pump moves a highpurity solvent through a Filter Drier and MoistureIndicator.
Solvent is pumped in or out of the machine bysimply reversing the Dry Disconnect Couplers.
All Liquid Components are built into abackplate assembly, and the entire PumpingSystem is easily removed from the cart forstationary use.
Shown at left, 55 Gallon Drum Carts areavailable with Vapor Recovery Fittings, DryDisconnect Couplers, and RemovablePumping Packages
Portable Dispensing Carts
SSVR
DRP
(3)
Pump with Carrying Handle, DownTube & Hoses, Transfers Liquidsfrom 55 Gallon Drums.
A Portable Liquid Transfer Packagecomplete with Pump, Motor, Strainer,Hoses, Nozzle, and Hand Held RemoteSwitch is available in 12 Volt or 120 VoltModels.
Dispensing or Mixing Liquids is easywith this Manually Operated VolumetricDispenser, pictured at left. Tanks areavailable in a variety of sizes, and stan-dard and custom ranges are available onthe Site Glass.
An Air Powered Dispenser with On BoardPressure Regulator uses plant air toDispense Liquid from Dispensing Nozzle.
A Manually Operated Chemical TransferSystem with Stainless Steel Pump, DryDisconnect Couplers, Remote OperatingSwitch, and 1/4 Horsepower Motor. Theparkage is made to mount on customerequipment.
Basic Transfer Systems
DP2
OFT
APD
ELB
PT100
(4)
Dispensing or Mixing of smallquantities from large supply tanks ishighly accurate with this Computerizedpackage. The liquids are weighed intothe tank by a scale, and moved toprocess via pumps or air pressure.
Flow Rate Control for In-Line Blending isprecise in many process applications using thispackage. A Flowmeter transmits a digitalsignal to the Computer, which Servo�s anElectric Control Valve. The ComputerDisplays all Flow Rates and Totals, and can beremotely started from a Master Controller.
Batching into Pressure Vessels safely andacccurately, these high pressure FlowmeterDispensing Systems are a complete Ready To UsePackage
Dispensing from 55 gallon drums to .02%accuracy is made possible with this scaleand Computer combination. Available withstandard Connect Kits or Vapor RecoveryCouplers. Easily integrated into ProcessControls Systems with remote operatingfeatures. Ideal for Dispensing smallquantities or hard to measure concentrates.
Batching & Blending
70D 3006
OFTC
ETll
(5)
There is no more pouring or guesswork in Blending Fuel Additiveswith this all electricComputerized Control System.The Econotrol TM Computerworks with the Bulk Flowmeterthat is already installed. Byinstalling a pulser on theFlowmeter, the Econotrolmeasures the Bulk Delivery, and100% of the additive ratio isblended automatically. TheComputer Screen displays Bulkand Additive Flow Rates andTotals. When the Bulk Flow Rateslows down, so does the additive.When the delivery is complete a printout (or RS232 upload)
completes the transfer, with your logo or favorite slogan.
Stainless Steel CompartmentalTanks are available with all Fluidand Electrical Connections donefor you, so it is a Drop & Go,Ready To Use System, that get�syou going fast.
The Injector Pump requires thespace of a shoe box and drawsonly 5 amps. @12 Volts DC.
Both the the Injector andComputer are light-weight andcompact, which gives you manyinstallation options to suit yourDelivery Trucks.
Injection Systems
ETllST
(6)
Measurement Sytems are made for Petroleum,Industrial, and Agrichemical Industries forTruck or In Plant use.
Pictured at right, Econotrol ComputersRatio to signals from Mainline Flowmeters.
High Pressure Piston Injectors aremade for Chemical Additives.
Large Capacity Diaphragm Injectors are made withComputer Controls and Printers for Indoor, Outdoor, orHazardous Area service.
Injection Systems
1006
ETllSD
(7)
Container Fillings Systems with Vapor Recovery and Dry Disconnect Couplers assures no spills orfumes. Computerized Data Management prints out Date, Time, Container I. D., and Fill Quantityin Gallons and Pounds. Every system is available with a Pressure Test feature, which will pressuretest the container, and print out Beginning Pressure, Ending Pressure, Differential Pressure, andPass or Fail results.
Pictured above, a 12 Volt DC FillingSystem Installed in a Delivery Truck
Pictured above, a High CapacityExplosion Proof Filler
Pictured above, a NEMA4X Filler for Outdoor use.
Keg and Drum Filling Systems
(8)
Drum Valve Filling orDispensing Couplers forDrip Free Close CoupledVapor Recovery
Stainless Steel Dip TubeKit with Vapor Recoveryfor 55 Gallon Drums
Vapor Recovery Filling and Dispensing Couplers, Nozzles, Container Extractor Valves, DryDisconnects and Connection parts are always available from Economy Controls, including...
UN1A Stainless SteelContainers arealways in house andavailabe in many sizes
Filling Couplers are available withDry Disconnect Couplers to changefrom Nozzles to Filling orDispensing Valves.
Vapor Recovery Fittings
(9)
Stainless Steel Dip Tube Kits are available for all Drum and Container sizes
Economy Controls maintains a complete Inventory of Manual and Electric Valves, Pressure &Temperature Gauges, Filters & Strainers, Hoses, Pipe Fittings, and Couplers, in all materialchoices. Hoses, Fittings and Pipework are assembled with in house machines and shipped fastwhen you need them.
Valves and Fittings
(10)
Components for Fluid Handling are always in Inventory atEonomy Controls, including...
Positive Displacement Flowmeters & Air Eliminators for Weights & Measures Applications
Turbine, Magnetic, Strain Gauge & Transit Time Flowmeters for Industrial Applications
Pump Designs, Materials, & Seals for All Fluids and Flow Rates
Level Gauges, Transmitters, Transducers, Valves, Thermometers, Sensors, & Controls
System Components
(11)
Sensors and Transmitter Kits are made by Economy Controls for Systems and OEM use.
Automation Systems, Custom Networks, &Programs for Bulk Plants insure that wecomplete our customer�s needs, both now andinto the future.
Solid State Optical Relays and all Circuitry insure trouble freeservice
All electrical components Plug-In, for easy service. Every Computermade by Economy Controls has Print or RS232 Upload Capaibility,and Real Time Clocks with Battery Backup
Stainless Steel Enclosures are Availablefor Corrosive or Wash Down Locations
Computers and Automation
Transmitters and Sensors
(12)
Our facility on 1+ Acre in St. Louis County is centrally located for National Distribution
Production Areas are designed for Quality and Efficiency.
Facility
(13)
Product and Services Guide
Liquid Dispensing ProductsCanister Volumetric TypesAir Compressor DispensersPump DispensersChemical Injection SystemsFlowmeter & Scale DispensersEnclosure, Skid, or Portable Wheeled Carts
Container Filling ProductsContainer Fillings Systems with Pressure Test & Documentation12VDC Truck Dispensers & Fillers
ElectronicsEconotrol ™ Flow ComputersMicrocontroller System Design & ManufacturingMicroprocessor ProgrammingLiquid Level TelemetryTicket PrintersHall Effect & Proximity Sensors & Transmitters for OEMsControl Panels & WiringBatching & Blending ControlsPump Monitoring & Speed Controls
Repair & CalibrationState Certified Meter & Scale CalibrationMeter & Pump RepairPressure Testing Facilities
ServicesPipe Cutting, Beveling, & ThreadingProcess Pipe Assemblies, Iron, Steel& Continuously Welded Stainless SteelHose Supplies, Swivels, & CouplersNIST, NCWM (Weights & Measures) ConsultantsSystem PackagingDrawings & Documentation Services
MechanicalMicro-Matic Valves & CouplersParker & OPW Dry DisconnectsClosed Loop (Vapor Recovery) ComponentsContainersHose Swivels & CouplersFlowmeters, Pumps, Valves, & Gauges
Facility1+ Acre St. Louis CountyStaging AreaTwo 14 Ft. Drive In BaysLoading DockFork Lift TruckCentrally Located for National Distribution
Product Support StaffToll Free Product Support7 Day/24 Hour Emergency ServiceNo Voice Mail
(14)
Liquid Name(s) #/gal or Sr. Gr.
Viscosity Of Liquids Operating Temperatures
Maximum Pump Lift Maximum Discharge Pressure
Required Flow Rate(s) (min. & max.) Minimum & Maximum Batch Size
Container Size(s) (Scale Systems)
Are any of the Liquids Flammable, or could they be in the future?
Would the System be used in any area where Flammables are stored?
Use Environment (indoors, outdoors, dust, wash down)
What Withdrawal Tubes, Couplers, and Fittings are needed or used?
Length of Suction Line
What Discharge Valves, Nozzles, or Couplers are needed or have been used?
Length of Discharge Line
What hose materials have been used in the past?
What are the Power Requirements (pneumatic, electric/voltage)
What materials are compatible with the liquid such as Iron, Brass, Steel, Stainless Steel, Plastics, Others?
Is the Liquid compatible with EPDM, Viton, Teflon, Others?
Describe what Pumps, Meters, or Valves you may have used with this Liquid
Are any special devices required, such as Air Eliminators, Strainers, Filters, Driers, or Moisture Indicators?
Is a System of Measurement Required?
Flow Rate (min. & max) of Main Flow Stream (Injection Systems)
Ratio of Additive to Main flow Stream (min. & max.) (Injection Systems)
Description of Intended Use:
Design Considerations
(15)
Quotations & Technical Support: 1-800-350-9797
24 Hour Emergency Service Support: 314-988-4086
Economy Controls CorporationPrinted in USA
CAT 2
©
9801 Gravois RoadSt. Louis, MO USA 63123-4205Telephone (314) 544-3700Telefax (314) 544-5373 email [email protected]
Fluid transfer systemsthat measure up!
Economy Controls
City Of St. Louis
Airport
64 40 Stadium
N270
Mis
siss
ippi
Riv
er
Forest Park
70
44
270
170
55
44
70
Kansas City
Tulsa
Memphis
Lacl
ede
Sta
tion
Rd
Hanley Road
Big Bend Blvd.
Eagar Road
Manchester Road
Poplar Street Bridge
270
55
Rock Hill Rd
Gravois Road
J B Bridge
GravoisAve
255
255270
Chain Of Rocks Bridge
270
64
Illinois
55
70
55
255
70
Indianapolis
Chicago
Louisville
270
Missouri
70 64 55 44
Mac
kenz
ie Revis BarracksRd.
GrantsFarm
Economy Controls9801 Gravois Road
R R
Harster Heating
Building
Watson Rd
Gravois Road
Lindbergh Blvd.
Hotels