trafi met.com
FUMEEXTRACTIONSYSTEM
EN
Legend
Index
1 m ØAir Flow Delivery head
AIR DEPURATION CLASS
Weight Dimensionslength x higth x
depth
Power
DEPRESSION NOISE LEVEL
Air Depuration ClassDepression Noise Level
Page 4-5
Page 6-21
Page 22-23
Page 24-35
Page 36-37
Page 38-39
Page 40
Page 41
Page 42-43
Introduction
TURBOPLUS hand torches
TURBOPLUS automatic torches
EXTRAPLUS hand torches
CYCLONE 2/0.9Kw and 2/1.8Kw Fume Exhausting Systems
CYCLONE 3/3.0Kw and 3/4.0Kw Fume Exhausting Systems
CYCLONE 3B Fume Exhausting System
Accessories and trolleys
Balanced arms and giant balanced arms
Weight at 1 metre high
Air cooling Liquid cooling
Voltage
Wire diameter Duty cycle amperage
The Trafimet fume extraction system is the most efficient and convenient way to safeguard the welding operators’ health.The range consists of 15 torches, 5 fume vacuum extractors and a full set of accessories suitable for any
operational needs.Compared to the classical solutions, the Trafimet fume extraction system cares also about the respect for the environment, thanks to high energy savings.100% A Green System!
The Trafi met fume extraction system, health in the workplace
TRAFIMET FUME EXTRACTION
SYSTEMSTANDARD WELDING
4
trafi met.comFUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
Healthier is strongerThe tests run with the Trafimet fume extractor system confirm that, during the welding of different steel alloys, the smoke concentration in the breathing zone is between 1.5 and 1.7 mg/m3.This is certainly a guarantee for the health of the operators: increasing of blood oxygenation, less fatigue, therefore a better quality of life in the workplace.
Health first of allThe workers good health is the most precious thing for a company. This is also required by the main directives and guidelines on safety and health at work.It is stated that the welding fumes contain a variety of metals and different kind of gasses are produced during welding.Welding fumes can cause serious health problems for workers if inhaled. Trafimet guarantees almost complete vacuum system capturing fumes even before the breathing zone and by any position of the operator, ensuring a TLV of -1.7 1.5 mg/min.
Energy savingWith the traditional systems, a Ø100mm suction arm requires approximately 30 kWh to provide a sufficient suction to prevent the operator from breathing the welding fumes. The Trafimet fume extraction system requires only 1 kWh every 8-hours work (tested with T350 torch with Ø 1.0/1.2 mm wire). How is it possible?For 3 simple reasons:1. the Trafimet fume extraction torches are studied for a high vacuumefficiency;2. compared to the classic aspiration torches, the Trafimet suction cone ismuch closer to the welding area, so it requires a lower suction power;3. While traditional systems are always on, the Trafimet suction systemturns on only during welding and off during periods of inactivity.Thanks to this efficiency we benefit of over 95% reduction of the energyrequired, compared to the traditional suction arms.
5All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
Economical savingThe Trafimet fume extraction system highly reduces the amount of air consumption.A traditional suction arm consumes approximately 2000 m3/h in a 8 hours shift. The Trafimet fume extraction system, connected to the torch T350, consumes only 80 m3h/, allowing significant savings in heating or conditioning costs.The Trafimet fume extraction torches cones work also as protection for the welding puddle. This way the gas amount needed for the protection is 1/4 compared to standard torches.
FCT - Flux Control Trafimet The FCT Torches are fitted with the Trafimet Flux control system. Through this system the operator can adjust the depression by pressing an additional handle button.The FCT system is required when you are welding in corner or narrow places, to avoid air floating that might disturb the shield gas.By pressing the FCT button, the aspirator stops (or close the vents in the case of centralized suction). The FCT system ensures excellent weld quality having the suction control in all circumstances.
Light and handyAftet the last restyling and innovations, the new Trafimet aspiration torches allow more performances at the same time are handier and more ergonomic.Our R&D especially focused on creating a very small handle with rotating metal joint that guarantees excellent grip and less effort.The new cable and the new outer hose are more performant, softer and handier. Consumables are made of selected raw materials for increased reliability and durability.
6
trafi met.com
TECHNICAL DA TACODE
MA1472 3 m 10’
EURO
MA1473 4 m 12’
MA1474 5 m 16.4’
TURBOPLUS T 250A
EN60974-7
1 m 1,29 kg 2,84 lb
Ø 0,8 ÷ 1,0 mm .030”÷. 040”
250A CO2 - 225A Mix
103 m³/h
1540 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
7
TURBOPLUS T 250A
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0471 Ø14mm nozzle round thread 14 mm 36 mm
1 MC0480 Ø16mm nozzle round thread 16 mm 36 mm
2 MD0009-08 M6 - Cu 0,8 mm .030” 28 mm 140.0051 20
2 MD0009-10 M6 - Cu 1,0 mm .040” 28 mm 140.0242 20
6 GM0500 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 3 m 10’ 124.0011 1
6 GM0501 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 4 m 12’ 124.0012 1
6 GM0502 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 5 m 16.4’ 124.0015 1
6 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
6 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
6 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
3 MQ0350 insulator gas D.12/14
3 MQ0352 insulator
4 FB0711 Threaded suction head round D.24
5 MQ0351 insulating toch body
7 MF0340 mig torch head
8 FB0680 Threaded suction head round D.22
9 BW0590 Bush nozzle D.22
10 MP0210 handle
11 BX0021 trigger
12 EA1270 Spiral sping
13 BW0591 Slider of adjustment suction Turboplus
14 BW0592 Cursor control apiration
15 EA1271 Handle screws
16 FB0690 Metal turning connection for hose D.40
17 MQ0396 Leather and velcro hose cover
18 MQ0190 Smoke hose 3.5 m D.40 Soft
18 MQ0307 Smoke hose 2.5 m D.40 Soft
18 MQ0308 Smoke hose 4.5 m D.40 Soft
19 EA1381 Hose support spring D.50/40
20 BW0497 Smoke deviating connection D.50
21 EA1275 Fixing screw for smoke deviating connection
22 MH0591 Separate gas hose mig cable 2,7 m - 16 mm²
22 MH0592 Separate gas hose mig cable 3,7 m - 16 mm²
22 MH0593 Separate gas hose mig cable 4,7 m - 16 mm²
23 BX1042 Control Lead 3m with connectors
23 BX1043 Control Lead 4m with connectors
23 BX1044 Control Lead 5m with connectors
24 AR0231 EURO connection
25 FA0026 Nut stops internal liner
26 FB0685 Conical suction device D.24 (INCLUDED)
27 EA1272 Scraper gas nozzle (OPTION)
28 EA1273 Argon-CO2 gas fl ow checker (OPTION)
1 MC0470 Ø12mm nozzle round thread 12 mm 36 mm
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
trafi met.com
TECHNICAL DA TACODE
MA2472 3 m 10’
EURO
MA2473 4 m 12’
MA2474 5 m 16.4’
TURBOPLUS T 250A FCT
EN60974-7
1 m 1,29 kg
Ø 0,8 ÷ 1,0 mm .030”÷. 040”
250A CO2 - 225A Mix
103 m³/h
1540 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
9
TURBOPLUS T 250A FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
3 MQ0350 Insulator gas D.12/14
3 MQ0352 insulator
4 FB0711 Threaded suction head round D.24
5 MQ0351 insulator torch body
7 MF0340 mig torch head
8 FB0680 Threaded suction head round D.22
9 BW0590 Bush nozzle D.22
10 MP0213 handle
11 BX0021 trigger
12 EA1270 Spiral sping
13 BW0593 Lever for microswitches
15 EA1271 Handle screws (6 pcs.)
16 FB0690 Metal turning connection for hose D.40
17
18 MQ0190 Smoke hose 3.5 m D.40 Soft
18 MQ0307 Smoke hose 2.5 m D.40 Soft
18 MQ0308 Smoke hose 4.5 m D.40 Soft
19 EA1381 Hose support spring D.50/40
20 BW0497 Smoke deviating connection D.50
21 EA1275 Fixing screw for smoke deviating connection
22 MH0591
22 MH0592
22 MH0593
23 BX1042 Control Lead 3m with connectors
23 BX1043 Control Lead 4m with connectors
23 BX1044 Control Lead 5m with connectors
24 AR0231 EURO connection
25 FA0026 Nut stops internal liner
26 FB0685 Conical suction device D.24 (INCLUDED)
27 EA1272 Scraper gas nozzle (OPTION)
28 EA1273 Argon-CO2 gas fl ow checker (OPTION)
29 BX0718 FCT trigger
30 BX0744 FCT cable with pin Jack without buttom
1 MC0471 Ø14mm nozzle round thread 14 mm 36 mm
1 MC0480 Ø16mm nozzle round thread 16 mm 36 mm
2 MD0009-08 M6 - Cu 0,8 mm .030” 28 mm 140.0051 20
2 MD0009-10 M6 - Cu 1,0 mm .040” 28 mm 140.0242 20
6 GM0500 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 3 m 10’ 124.0011 1
6 GM0501 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 4 m 12’ 124.0012 1
6 GM0502 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 5 m 16.4’ 124.0015 1
6 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
6 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
6 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
1 MC0470 Ø12mm nozzle round thread 12 mm 36 mm
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Separate gas hose mig cable 2,7 m - 16 mm²
Separate gas hose mig cable 3,7 m - 16 mm²
Separate gas hose mig cable 4,7 m - 16 mm²
MQ0396 Leather and velcro hose cover
10
trafi met.com
TECHNICAL DA TACODE
MA1478 3 m 10’
EURO
MA1479 4 m 12’
MA1480 5 m 16.4’
TURBOPLUS T 350A
EN60974-7
1 m 1,37 kg 3,02 lb
Ø 1,0 ÷ 1,2 mm .040” ÷ .045”
350A CO2 - 310A Mix
120 m³/h
1385 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
11
TURBOPLUS T 350A
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0474 Ø14mm nozzle round thread 14 mm
1 MC0475 Ø16mm nozzle round thread 16 mm 5/8”
2 MD0005-10 M8 - Cu 1,0 mm .040” 30 mm 140.0313 20
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-80 M8 - CuCrZr 1,0 mm .040” 30 mm 140.0316 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
3 ME0442 Diffuser M8 30 mm
7 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
7 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
7 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
7 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
7 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
7 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
4 MQ0355 Cylindric insulator L.33
5 FB0712 Threaded suction head round D.30
6 MQ0356 insulator D.19
8 MF0343 mig torch head
9 FB0681 mig torch head 50° D.28
10 MP0210 handle
11 BX0021 trigger
12 EA1270 Spiral sping
13 BW0591 Slider of adjustment suction Turboplus
14 BW0592 Cursor control apiration
15 EA1271
16 FB0690 Metal turning connection for hose D.40
17
19 EA1380 Hose support spring
20 BW0497 Smoke deviating connection D.50
21 MH0594 Separate gas hose mig cable 2,7 m - 25 mm²
21 MH0595 Separate gas hose mig cable 3,7 m - 25 mm²
21 MH0596 Separate gas hose mig cable 4,7 m - 25 mm²
22 BX1042 Control Lead 3m with connectors
22 BX1043 Control Lead 4m with connectors
22 BX1044 Control Lead 5m with connectors
23 EA1275 Fixing screw for smoke deviating connection
24 AR0231 EURO connection
25 Nut stops internal liner
26 FB0686 Conical suction device D.30 (OPTION)
27 FB0687 Short conical suction device D.30 (INCLUDED)
28 EA1274 Scraper gas nozzle (OPTION)
29 EA1273 Argon-CO2 gas fl ow checker (OPTION)
30 MQ0132 Smoke hose 2.2 m D.40 Soft
30 MQ0133 Smoke hose 3.2 m D.40 Soft
30 MQ0134 Smoke hose 4.2 m D.40 Soft
31 FA0062 Intermediate fi tting D.50/40
32 MQ0135 Smoke hose 0.3 m D.50 Soft
1 MC0473 Ø12mm nozzle round thread 12 mm
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
12
trafi met.com
TECHNICAL DA TACODE
MA2478 3 m 10’
EURO
MA2479 4 m 12’
MA2480 5 m 16.4’
TURBOPLUS T 350A FCT
EN60974-7
1 m 1,37 kg
Ø 1,0 ÷ 1,2 mm .040” ÷ .045”
350A CO2 - 310A Mix
120 m³/h
1385 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
13
TURBOPLUS T 350A FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
4 MQ0355 Insulator L.33
5 Threaded suction head round D.30
6 MQ0356 Insulator D.19
8 MF0343 mig torch head
9 FB0681 mig torch head 50° D.28
10 MP0213 handle
11 BX0021 trigger
12 EA1270 Spiral sping
13 BW0593 Lever for microswitches
15 EA1271
16 FB0690 Metal turning connection for hose D.40
17
19 EA1380 Hose support spring
20 BW0497 Smoke deviating connection D.50
21 MH0594
21 MH0595
21 MH0596
22 BX1042 Control Lead 3m with connectors
22 BX1043 Control Lead 4m with connectors
22 BX1044 Control Lead 5m with connectors
23 EA1275 Fixing screw for smoke deviating connection
24 AR0231 EURO connection
25 Nut stops internal liner
26 FB0686 Conical suction device D.30 (OPTION)
27 FB0687 Short conical suction device D.30 (INCLUDED)
28 EA1274 Scraper gas nozzle (OPTION)
29 EA1273 Argon-CO2 gas fl ow checker (OPTION)
30 MQ0132 Smoke hose 2.2 m D.40 Soft
30 MQ0133 Smoke hose 3.2 m D.40 Soft
30 MQ0134 Smoke hose 4.2 m D.40 Soft
31 FA0062 Intermediate fi tting D.50/40
32 MQ0135 Smoke hose 0.3 m D.50 Soft
33 BX0718 FCT trigger
34 BX0744 FCT cable with pin Jack without buttom
1 MC0474 Ø14mm nozzle round thread 14 mm
1 MC0475 Ø16mm nozzle round thread 16 mm 5/8”
2 MD0005-10 M8 - Cu 1,0 mm .040” 30 mm 20 140.0313
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 20 140.0442
2 MD0005-80 M8 - CuCrZr 1,0 mm .040” 30 mm 20 140.0316
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
3 ME0442 Diff user M8 30 mm
7 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
7 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
7 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
7 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
7 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
7 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
1 MC0473 Ø12mm nozzle round thread 12 mm
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Separate gas hose mig cable 2,7 m - 25 mm²
Separate gas hose mig cable 3,7 m - 25 mm²
Separate gas hose mig cable 4,7 m - 25 mm²
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FB0712
FA0026
14
trafi met.com
TECHNICAL DA TACODE
MB0909 3,3 m
EURO
MB0910 4,3 m
MB0911 5,3 m
TURBOPLUS TR 400A
EN60974-7
REFRIGERANTLIQUIDUTI000158
1 m 1,40 kg 3,09 lb
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
400A CO2 - 350A Mix
125 m³/h
1350 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
15
TURBOPLUS TR 400A
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0474 Ø14mm nozzle round thread 14 mm 1
1 MC0475 Ø16mm nozzle round thread 16 mm 5/8”
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0442 30 mm
16 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
16 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
16 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
16 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
16 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
16 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
16 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
16 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
16 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
4 MQ0355 Cylindric insulator L.33
5 FB0713 Threaded suction head round D.32
6 MQ0356 Insulator D.19
7 MG0250 mig torch head
8 FB0682 mig torch head 50° D.30
9 MP0211 handle
10 BX0021 trigger
11 EA1270 Spiral sping
12 BW0593 Lever for microswitches
13 BW0592 Cursor control apiration
14 EA1271
15 FB0690 Metal turning connection for hose D.40
17 MH0517 Guide liner hose 3 m
17 MH0518 Guide liner hose 4 m
17 MH0519 Guide liner hose 5 m
18 QB0014 Water inlet hose 4 m
18 QB0117 Water inlet hose 3 m
18 QB0118 Water inlet hose 5 m
19 MQ0199 Water outlet hose 0.6 m
20 MH0203 Current/water cable 3 m - 10’
20 MH0204 Current/water cable 4 m - 12’
20 MH0205 Current/water cable 5 m - 16.4’
21 BX1042 Control Lead 3m with connectors
21 BX1043 Control Lead 4m with connectors
21 BX1044 Control Lead 5m with connectors
22
24 EA1380 Hose support spring
25 BW0498 Smoke deviating connection D.50 H2O
26 EA1275 Fixing screw for smoke deviating connection
27 FA3020 water - Ø 6 mm
28 AR0233 EURO connection
29 Nut stops internal liner
30 FB0707 Cylindric suction device D.32 (OPTION)
31 FB0182 Short cilindric suction device D.32 (INCLUDED)
32 EA1274 Scraper gas nozzle (OPTION)
33 EA1273 Argon-CO2 gas fl ow checker (OPTION)
34 MQ0190 Smoke hose 3.5 m D.40 Soft
34 MQ0307 Smoke hose 2.5 m D.40 Soft
34 MQ0308 Smoke hose 4.3 m D.40 Soft
35 FA0062 Intermediate fi tting D.50/40
36 MQ0135 Smoke hose 0.3 m D.50 Soft
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1 1
1
1
1
1
1
1
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Diffuser M8 1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
16
trafi met.com
TECHNICAL DA TACODE
MB2909 3,3 m
EURO
MB2910 4,3 m
MB2911 5,3 m
TURBOPLUS TR 400A FCT
EN60974-7
1 m 1,40 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
400A CO2 - 350A Mix
125 m³/h
1350 mm/H2O
REFRIGERANTLIQUIDUTI000158
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
17
TURBOPLUS TR 400A FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0474 Ø14mm nozzle round thread 14 mm 1
1 MC0475 Ø16mm nozzle round thread 16 mm 5/8”
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0442 30 mm
16 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
16 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
16 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
16 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
16 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
16 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
16 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
16 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
16 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
4 MQ0355 Cylindric Insulator L.33
5 Threaded suction head round D.32
6 MQ0356 Insulator D.19
7 MG0250 mig torch head
8 FB0682 mig torch head 50° D.30
9 MP0213 handle
10 BX0021 trigger
11 EA1270 Spiral sping
12 BW0593 Lever for microswitches
13 BW0592 Cursor control apiration
14 EA1271
15 FB0690 Metal turning connection for hose D.40
17 MH0517
17 MH0518
17 MH0519
18 QB0014 Water inlet hose 4 m
18 QB0117 Water inlet hose 3 m
18 QB0118 Water inlet hose 5 m
19 MQ0199 Water outlet hose 0.6 m
20 MH0203 Current/water cable 3 m - 10’
20 MH0204 Current/water cable 4 m - 12’
20 MH0205 Current/water cable 5 m - 16.4’
21 BX1042 Control Lead 3m with connectors
21 BX1043 Control Lead 4m with connectors
21 BX1044 Control Lead 5m with connectors
22
24 EA1380 Hose support spring
25 BW0498 Smoke deviating connection D.50 H2O
26 EA1275 Fixing screw for smoke deviating connection
27 FA3020 water - Ø 6 mm
28 AR0233 EURO connection
29 Nut stops internal liner
30 FB0707 Cylindric suction device D.32 (OPTION)
31 FB0182 Short cilindric suction device D.32 (INCLUDED)
32 EA1274 Scraper gas nozzle (OPTION)
33 EA1273 Argon-CO2 gas fl ow checker (OPTION)
34 MQ0190 Smoke hose 3.5 m D.40 Soft
34 MQ0307 Smoke hose 2.5 m D.40 Soft
34 MQ0308 Smoke hose 4.5 m D.40 Soft
35 FA0062 Intermediate fi tting D.50/40
36 MQ0135 Smoke hose 0.3 m D.50 Soft
37 BX0718 FCT trigger
38 BX0744 FCT cable with pin Jack without buttom
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Diffuser M8
Guide liner hose 3 m
Guide liner hose 4 m
Guide liner hose 5 m
1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FB0713
FA0026
18
trafi met.com
TECHNICAL DA TACODE
MB0920 3,3 m
EURO
MB0921 4,3 m
MB0922 5,3 m
TURBOPLUS TR 480A
EN60974-7
REFRIGERANTLIQUIDUTI000158
1 m 1.50 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
480A CO2 - 420A Mix
125 m³/h
1350 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
19
TURBOPLUS TR 480A
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0193 Ø 16 mm 16 mm 48 mm 1
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0442 30 mm
15 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
15 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
15 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
15 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
15 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
15 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
15 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
15 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
15 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
4 MQ0355 Cylindric Insulator L.33
5 MG0244 mig torch head 50° Ø32
6 MQ0356 Insulator D.19
7 MG0243 mig torch head
8 MP0211 handle
9 BX0021 trigger
10 EA1270 Spiral sping
11 BW0593 Lever for microswitches
12 BW0592 Cursor control apiration
13 EA1271
14 FB0690 Metal turning connection for hose D.40
16 MH0517
16 MH0518
16 MH0519
17 MQ0199 Water outlet hose 0.6 m
18 QB0014 Water inlet hose 4 m
18 QB0117 Water inlet hose 3 m
18 QB0118 Water inlet hose 5 m
19 MH0203
19 MH0204
19 MH0205
20 BX1042 Control Lead 3m with connectors
20 BX1043 Control Lead 4m with connectors
20 BX1044 Control Lead 5m with connectors
21
23 EA1380 Hose support spring
24 BW0498 Smoke deviating connection D.50 H2O
25 EA1275 Fixing screw for smoke deviating connection
26 FA3020 water - Ø 6 mm
27 AR0233 EURO connection
28 Nut stops internal liner
29 FB0182 Short cilindric suction device D.32 (INCLUDED)
30 FB0707 Cylindric suction device D.32 (OPTION)
31 EA1274 Scraper gas nozzle (OPTION)
32 EA1273 Argon-CO2 gas fl ow checker (OPTION)
33 MQ0190 Smoke hose 3.5 m D.40 Soft
33 MQ0307 Smoke hose 2.5 m D.40 Soft
33 MQ0308 Smoke hose 4.5 m D.40 Soft
34 FA0062 Intermediate fi tting D.50/40
35 MQ0135 Smoke hose 0.3 m D.50 Soft
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Diffuser M8
Guide liner hose 3 m
Guide liner hose 4 m
Guide liner hose 5 m
Current/water cable 3 m - 10’
Current/water cable 4 m - 12’
Current/water cable 5 m - 16.4’
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
20
trafi met.com
TECHNICAL DA TACODE
MB2920 3,3 m
EURO
MB2921 4,3 m
MB2922 5,3 m
TURBOPLUS TR 480A FCT
EN60974-7
1 m 1,50 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
480A CO2 - 420A Mix
125 m³/h
1350 mm/H2O
REFRIGERANTLIQUIDUTI000158
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
21
TURBOPLUS TR 480A FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0193 Ø 16 mm 16 mm 48 mm 1
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0442 30 mm
15 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
15 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
15 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
15 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
15 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
15 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
15 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
15 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
15 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
4 MQ0355 Cylindric insulator L.33
5 MG0244 mig torch head
6 MQ0356 Insulator D.19
7 MG0243 mig torch head
8 MP0213 handle
9 BX0021 trigger
10 EA1270 Spiral sping
11 BW0593 Lever for microswitches
12 BW0592 Cursor control apiration
13 EA1271
14 FB0690 Metal turning connection for hose D.40
16 MH0517
16 MH0518
16 MH0519
17 MQ0199 Water outlet hose 0.6 m
18 QB0014 Water inlet hose 4 m
18 QB0117 Water inlet hose 3 m
18 QB0118 Water inlet hose 5 m
19 MH0203
19 MH0204
19 MH0205
20 BX1042 Control Lead 3m with connectors
20 BX1043 Control Lead 4m with connectors
20 BX1044 Control Lead 5m with connectors
21
23 EA1380 Hose support spring
24 BW0498 Smoke deviating connection D.50 H2O
25 EA1275 Fixing screw for smoke deviating connection
26 FA3020 water - Ø 6 mm
27 AR0233 EURO connection
28 Nut stops internal liner
29 FB0182 Short cilindric suction device D.32 (INCLUDED)
30 FB0707 Cylindric suction device D.32 (OPTION)
31 EA1274 Scraper gas nozzle (OPTION)
32 EA1273 Argon-CO2 gas fl ow checker (OPTION)
33 MQ0190 Smoke hose 3.5 m D.40 Soft
33 MQ0307 Smoke hose 2.5 m D.40 Soft
33 MQ0308 Smoke hose 4.5 m D.40 Soft
34 FA0062 Intermediate fi tting D.50/40
35 MQ0135 Smoke hose 0.3 m D.50 Soft
36 BX0718 FCT trigger
37 BX0744 FCT cable with pin Jack without buttom
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Diffuser M8
Current/water cable 3 m - 10’
Current/water cable 4 m - 12’
Current/water cable 5 m - 16.4’
Guide liner hose 3 m
Guide liner hose 4 m
Guide liner hose 5 m
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
22
trafi met.com
TECHNICAL DA TACODE
MB2930 1,8 m
EURO
MB2931 2,8 m
MB2932 3,8 m
MB2933 4,8 m
TURBOPLUS 480R AUT
EN60974-7
1 m 1,40 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
420A CO2 - 380A Mix
132 m³/h
1328 mm/H2O
REFRIGERANTLIQUIDUTI000158
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
23
TURBOPLUS 480R AUT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0193 Ø 16 mm 16 mm 48 mm 1
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0442 30 mm
9 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
9 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
9 GM0576 black steel liner 1,6 ÷ 2,4 mm 5 m 16.4’ 1
9 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
9 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
4 MQ0355 cylindrical insulator L.33
5 FB0697 Threaded suction head cooling 180° D.32
6 MQ0356 Insulating washer D.19
7 MG0253 mig torch head
8 MP0172 handle
10 MH0572 Guide liner hose 1,58 m
10 MH0573 Guide liner hose 2,58 m
10 MH0574 Guide liner hose 3,58 m
10 MH0575 Guide liner hose 4,58 m
11 QB0145 W ater inlet hose 1.6 m
11 QB0146 W ater inlet hose 2.6 m
11 QB0147 W ater inlet hose 3.6 m
11 QB0148 W ater inlet hose 4.6 m
12 MQ0199 Water outlet hose 0.6 m
13 FA3020 water - Ø 6 mm
15 MH0681 Current/water cable 1,5 m
15 MH0682 Current/water cable 2,5 m
15 MH0683 Current/water cable 3,5 m
15 MH0684 Current/water cable 4,5 m
16 MQ0380 Smoke hose 1.3 m D.50
16 MQ0381 Smoke hose 2.3 m D.50
16 MQ0382 Smoke hose 3.3 m D.50
16 MQ0383 Smoke hose 4.3 m D.50
17 EA1380 Hose support spring
18 BW0498 Smoke deviating connection D.50 H2O
19 EA1275 Fixing screw for smoke deviating connection
21 Nut stops internal liner
22 FB0182 Short cilindric suction device D.32 (INCLUDED)
23 EA1274 Scraper gas nozzle (OPTION)
24 EA1273 Argon-CO2 gas fl ow checker (OPTION)
25 FA5166 water hose joint
28 AR0232 EURO connection
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Diffuser M8 1
FA0026
24
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 25 EN60974-7
CODE
MA1515 3 m 10’
EURO
MA1516 4 m 12’
MA1517 5 m 16.4’
1 m 1,40 kg
Ø 0,8 ÷ 1,2 mm .030” ÷ .045”
250A CO2 - 225A Mix
103 m³/h
1540 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
25
CODE CODE
EXTRAPLUS 25
CODE Ø REF
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
5 MF0323 mig torch head
6 FB0360 Extraction nozzle
7 MP0210 handle
8 BX0021 trigger
9 EA1270 Spiral sping
10 BW0591 Slider of adjustment suction Turboplus
11 BW0592 Cursor control apiration
12 EA1271
13 FB0690 Metal turning connection for hose D.40
14
15 MQ0190 Smoke hose 3.5 m D.40 Soft
15 MQ0307 Smoke hose 2.5 m D.40 Soft
15 MQ0308 Smoke hose 4.5 m D.40 Soft
16 EA1381 Hose support spring D.50/40
17 BW0497 Smoke deviating connection D.50
18 EA1275 Fixing screw for smoke deviating connection
19 BX1042 Control Lead 3m with connectors
19 BX1043 Control Lead 4m with connectors
19 BX1044 Control Lead 5m with connectors
20 MH0591 Separate gas hose current cable 2,7 m - 16 mm²
20 MH0592 Separate gas hose current cable 3,7 m - 16 mm²
20 MH0593 Separate gas hose current cable 4,7 m - 16 mm²
21 AR0231 EURO connection
22 Nut stops internal liner
23 FB0361 Suction device (INCLUDED)
24 FB0687 Short conical suction device D.30 (OPTION)
25 EA1273 Argon-CO2 gas fl ow checker (OPTION)
1 MC0023 Ø 15 mm 15 mm 57 mm 145.0076 10
1 MC0024 Ø 18 mm 18 mm 57 mm 145.0042 10
2 MD0009-08 M6 - Cu 0,8 mm .030” 28 mm 140.0051 20
2 MD0009-10 M6 - Cu 1,0 mm .040” 28 mm 140.0242 20
2 MD0009-12 M6 - Cu 1,2 mm .045” 28 mm 140.0379 20
3 ME0016 M6 - copper 35 mm 142.0001 10
4 GM0500 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 3 m 10’ 124.0011 1
4 GM0501 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 4 m 12’ 124.0012 1
4 GM0502 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 5 m 16.4’ 124.0015 1
4 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
4 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
4 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover FA0026
26
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 25 FCT
EN60974-7
CODE
MA1520 3 m 10’
EURO
MA1521 4 m 12’
MA1522 5 m 16.4’
1 m 1,40 kg
Ø 0,8 ÷ 1,2 mm .030” ÷ .045”
250A CO2 - 225A Mix
103 m³/h
1540 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
27
CODE CODE
EXTRAPLUS 25 FCT
CODE Ø REF
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0023 Ø 15 mm 15 mm 57 mm 145.0076 10
1 MC0024 Ø 18 mm 18 mm 57 mm 145.0042 10
2 MD0009-08 M6 - Cu 0,8 mm .030” 28 mm 140.0051 20
2 MD0009-10 M6 - Cu 1,0 mm .040” 28 mm 140.0242 20
2 MD0009-12 M6 - Cu 1,2 mm .045” 28 mm 140.0379 20
3 ME0016 M6 - copper 35 mm 142.0001 10
4 GM0500 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 3 m 10’ 124.0011 1
4 GM0501 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 4 m 12’ 124.0012 1
4 GM0502 blue steel liner 0,6 ÷ 0,9 mm .023” ÷ .035” 5 m 16.4’ 124.0015 1
4 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
4 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
4 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
5 MF0323 mig torch head
6 FB0360 Extraction nozzle
7 MP0213 handle
8 BX0021 trigger
9 EA1270 Spiral sping
10 BW0593 Lever for microswitches
12 EA1271
13 FB0690 Metal turning connection for hose D.40
14
15 MQ0190 Smoke hose 3.5 m D.40 Soft
15 MQ0307 Smoke hose 2.5 m D.40 Soft
15 MQ0308 Smoke hose 4.5 m D.40 Soft
16 EA1381 Hose support spring D.50/40
17 BW0497 Smoke deviating connection D.50
18 EA1275 Fixing screw for smoke deviating connection
19 BX1042 Control Lead 3m with connectors
19 BX1044 Control Lead 5m with connectors
19 BX1043 Control Lead 4m with connectors
20 MH0591
20 MH0592
20 MH0593
21 AR0231 EURO connection
22 Nut stops internal liner
23 FB0361 Suction device (INCLUDED)
24 FB0687 Short conical suction device D.30 (OPTION)
25 EA1273 Argon-CO2 gas fl ow checker (OPTION)
26 BX0718 FCT trigger
27 BX0744 FCT cable with pin Jack without buttom
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Separate gas hose current cable 2,7 m - 16 mm²
Separate gas hose current cable 3,7 m - 16 mm²
Separate gas hose current cable 4,7 m - 16 mm² Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover FA0026
28
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 36 EN60974-7
CODE
MA1530 3 m 10’
EURO
MA1531 4 m 12’
MA1532 5 m 16.4’
1 m 1,60 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
350A CO2 - 310A Mix
112 m³/h
1480 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
29
EXTRAPLUS 36
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0027 Ø 16 mm 2,5 mm 16 mm 5/8” 84 mm 145.0078 10
1 MC0028 Ø 19 mm 2,5 mm 19 mm 3/4” 84 mm 145.0045 10
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0017 plastic 32,8 mm 014.0261 10
3 ME0517 ceramic 32,8 mm 014.0023 10
4 MD0064-00 M8 - brass 28 mm 142.0020 20
5 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
5 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
5 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
5 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
5 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
5 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
6 MF0325 mig torch head
7 MP0211 handle
8 BX0021 trigger
9 EA1270 Spiral sping
10 BW0593 Lever for microswitches
11 BW0592 Cursor control apiration
12 EA1271
13 FB0690 Metal turning connection for hose D.40
14
16 EA1380 Hose support spring
17 BW0497 Smoke deviating connection D.50
18 EA1275 Fixing screw for smoke deviating connection
19 BX1042 Control Lead 3m with connectors
19 BX1043 Control Lead 4m with connectors
19 BX1044 Control Lead 5m with connectors
20 MH0597 Separate gas hose current cable 2,7 m - 35 mm²
20 MH0598 Separate gas hose current cable 3,7 m - 35 mm²
20 MH0599 Separate gas hose current cable 4,7 m - 35 mm²
21 AR0231 EURO connection
22 Nut stops internal liner
23 FB0603 Long suction device D.30 (INCLUDED)
24 FB0687 Short conical suction device D.30 (OPTION)
25 EA1273 Argon-CO2 gas fl ow checker (OPTION)
26 MQ0132 Smoke hose 2.2 m D.40 Soft
26 MQ0133 Smoke hose 3.2 m D.40 Soft
26 MQ0134 Smoke hose 4.2 m D.40 Soft
27 FA0062 Intermediate fi tting D.50/40
28 MQ0135 Smoke hose 0.3 m D.50 Soft
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
30
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 36 FCT
EN60974-7
CODE
MA1525 3 m 10’
EURO
MA1526 4 m 12’
MA1527 5 m 16.4’
1 m 1,60 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ 1/16”
350A CO2 - 310A Mix
112 m³/h
1480 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
60%
ANTISPATTER SPRAY CERAMIC BASEDUTI000089 - 500ml
Ideal for fume extraction torches.It avoids obstructing the passage of fumes and extends the life of consumables.
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
31
EXTRAPLUS 36 FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0027 Ø 16 mm 2,5 mm 16 mm 5/8” 84 mm 145.0078 10
1 MC0028 Ø 19 mm 2,5 mm 19 mm 3/4” 84 mm 145.0045 10
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0017 plastic 32,8 mm 014.0261 10
3 ME0517 ceramic 32,8 mm 014.0023 10
4 MD0064-00 M8 - brass 28 mm 142.0020 20
5 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
5 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
5 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
5 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
5 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
5 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
6 MF0325 mig torch head
7 MP0213 handle
8 BX0021 trigger
9 EA1270 Spiral sping
10 BW0593 Lever for microswitches
12 EA1271
13 FB0690 Metal turning connection for hose D.40
14
16 EA1380 Hose support spring
17 BW0497 Smoke deviating connection D.50
18 EA1275 Fixing screw for smoke deviating connection
19 BX1042 Control Lead 3m with connectors
19 BX1043 Control Lead 4m with connectors
19 BX1044 Control Lead 5m with connectors
20 MH0597 Separate gas hose current cable 2,7 m - 35 mm²
20 MH0598 Separate gas hose current cable 3,7 m - 35 mm²
20 MH0599 Separate gas hose current cable 4,7 m - 35 mm²
21 AR0231 EURO connection
22 Nut stops internal liner
23 FB0603 Long suction device D.30 (INCLUDED)
24 FB0687 Short conical suction device D.30 (OPTION)
25 EA1273 Argon-CO2 gas fl ow checker (OPTION)
26 MQ0132 Smoke hose 2.2 m D.40 Soft
26 MQ0133 Smoke hose 3.2 m D.40 Soft
26 MQ0134 Smoke hose 4.2 m D.40 Soft
27 FA0062 Intermediate fi tting D.50/40
28 MQ0135 Smoke hose 0.3 m D.50 Soft
29 BX0718 FCT trigger
30 BX0744 FCT cable with pin Jack without buttom
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
32
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 500 EN60974-7
CODE
MB0905 3,3 m
EURO
MB0906 4,3 m
MB0907 5,3 m
REFRIGERANTLIQUIDUTI000158
1 m 1,70 kg 3.31 lb
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
500A CO2 - 450A Mix
125 m³/h
1350 mm/H2O
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
33
EXTRAPLUS 500
CODE Ø REF
CODE CODE
STANDARD
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0268 Ø 16 mm 2,5 mm 16 mm 5/8” 76 mm 145.0085 10
1 MC0291 Ø 20 mm 2,5 mm 20 mm 76 mm 145.0051 10
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0390 M8 - copper 25 mm - 10
4 ME0079 plastic 29 mm 300029 10
4 ME0579 ceramic 16 mm 5/8” 28 mm - 10
17 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
17 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
17 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
17 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
17 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
17 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
17 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
17 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
17 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
5 FB0179 Body torch insulator D.20
6 FB0180 Bushing insulator L=25 torch body
7 FB0181 Threaded suction head D.30
8 MG0395 mig torch head
9 FB0178 Extraction nozzle 50° D.30
10 MP0211 handle
11 BW0593 Lever for microswitches
12 EA1270 Spiral sping
13 BX0021 trigger
14 BW0592 Cursor control apiration
15 EA1271
16 FB0690 Metal turning connection for hose D.40
18 MH0517
18 MH0518
18 MH0519
19 QB0143 Gas pipe 4 mt
19 QB0144 Gas pipe 5 mt
20
22 EA1380 Hose support spring
23 BW0498 Smoke deviating connection D.50 H2O
24
QB0014 Water inlet hose 4 m 24
QB0117 Water inlet hose 3 m
24 QB0118 Water inlet hose 5 m
25 MQ0199 Water outlet hose 0.6 m
26 FA3020 water - Ø 6 mm
27 EA1275 Fixing screw for smoke deviating connection
28 BX1042 Control Lead 3m with connectors
28 BX1043 Control Lead 4m with connectors
28 BX1044 Control Lead 5m with connectors
29 MH0203
29 MH0204
29 MH0205
30 AR0232 EURO connection
31 Nut stops internal liner
32 FB0182 Short cilindric suction device D.32 (OPTION)
32 FB0183 Long conical suction device D.32 (OPTION)
33 FB0688 Suction device D.32 (INCLUDED)
34 EA1273 Argon-CO2 gas fl ow checker (OPTION)
35 MQ0190 Smoke hose 3.5 mt D.40 Soft
35 MQ0307 Smoke hose 2.5 mt D.40 Soft
35 MQ0308 Smoke hose 4.5 mt D.40 Soft
36 FA0062 Intermediate fi tting D.50/40
37 MQ0135 Smoke hose 0.3 mt D.50 Soft
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Current/water cable 3 m - 10’
Current/water cable 4 m - 12’
Current/water cable 5 m - 16.4’
Liner guide hose 3 m
Liner guide hose 4 m
Liner guide hose 5 m
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
34
trafi met.com
TECHNICAL DA TA
EXTRAPLUS 500 FCT
EN60974-7
CODE
MB2905 3,3 m
EURO
MB2906 4,3 m
MB2907 5,3 m
1 m 1,70 kg
Ø 1,2 ÷ 1,6 mm .045” ÷ .1/16”
500A CO2 - 450A Mix
125 m³/h
1350 mm/H2O
REFRIGERANTLIQUIDUTI000158
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
MQ0397 . 2,5 m MQ0398 . 3,5 m MQ0399 . 4,5 m
Ideal for protecting fume extraction tubes against spatter, heat and wear.
EXTERNAL PROTECTION Leather and velcro, Ø 40 mm
(OPTION)
35
EXTRAPLUS 500 FCT
STANDARD
CODE Ø REF
CODE CODE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
1 MC0268 Ø 16 mm 2,5 mm 16 mm 5/8” 76 mm 145.0085 10
1 MC0291 Ø 20 mm 2,5 mm 20 mm 76 mm 145.0051 10
2 MD0005-12 M8 - Cu 1,2 mm .045” 30 mm 140.0442 20
2 MD0005-16 M8 - Cu 1,6 mm 1/16” 30 mm 140.0587 20
2 MD0005-82 M8 - CuCrZr 1,2 mm .045” 30 mm 140.0445 20
2 MD0005-86 M8 - CuCrZr 1,6 mm 1/16” 30 mm 140.0590 20
3 ME0390 M8 - copper 25 mm - 10
4 ME0079 plastic 29 mm 300029 10
4 ME0579 ceramic 16 mm 5/8” 28 mm - 10
17 GM0510 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 3 m 10’ 124.0026 1
17 GM0511 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 4 m 12’ 124.0031 1
17 GM0512 red steel liner 1,0 ÷ 1,2 mm .040” ÷ .045” 5 m 16.4’ 124.0035 1
17 GM0540 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 124.0041 1
17 GM0541 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 124.0042 1
17 GM0542 yellow steel liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 124.0044 1
17 GM0736 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 3 m 10’ 1
17 GM0737 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 4 m 12’ 1
17 GM0738 black Nylon® + 12% Graphite liner 1,2 ÷ 1,6 mm .045” ÷ 1/16” 5 m 16.4’ 1
5 FB0179 Body torch insulator D.20
6 FB0180 Bushing insulator L=25 torch body
7 FB0181 Threaded suction head D.30
8 MG0395 mig torch head
9 FB0178 Extraction nozzle 50° D.30
10 MP0213 handle
11 BX0021 trigger
12 EA1270 Spiral sping
13 BW0593 Lever for microswitches
15 EA1271
16 FB0690 Metal turning connection for hose D.40
18 MH0517 Liner guide hose 3 m
18 MH0518 Liner guide hose 4 m
18 MH0519 Liner guide hose 5 m
19 QB0143 Gas hose 4 mt
19 QB0144 Gas hose 5 mt
20
22 EA1380 Hose support spring
23 BW0498 Smoke deviating connection D.50 H2O
24
QB0014 Water inlet hose 4 m 24
QB0117 Water inlet hose 3 m
24 QB0118 Water inlet hose 5 m
25 MQ0199 Water outlet hose 0.6 m
26 FA3020 water - Ø 6 mm
27 EA1275 Fixing screw for smoke deviating connection
28 BX1042 Control Lead 3m with connectors
28 BX1043 Control Lead 4m with connectors
28 BX1044 Control Lead 5m with connectors
29 MH0203
29 MH0204
29 MH0205
30 AR0232 EURO connection
31 Nut stops internal liner
32 FB0182 Short cilindric suction device D.32 (OPTION)
32 FB0183 Long conical suction device D.32 (OPTION)
33 FB0688 Suction device D.32 (INCLUDED)
34 EA1273 Argon-CO2 gas fl ow checker (OPTION)
35 MQ0190 Smoke hose 3.5 mt D.40 Soft
35 MQ0307 Smoke hose 2.5 mt D.40 Soft
35 MQ0308 Smoke hose 4.5 mt D.40 Soft
36 FA0062 Intermediate fi tting D.50/40
37 MQ0135 Smoke hose 0.3 mt D.50 Soft
38 BX0718 FCT trigger
39 BX0744 FCT cable with pin Jack without buttom
1
1
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Current/water cable 3 m - 10’
Current/water cable 4 m - 12’
Current/water cable 5 m - 16.4’
Handle screws (6 pcs.)
MQ0396 Leather and velcro hose cover
FA0026
36
trafi met.comFUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
Cyclone System 2/1.8 kW FCT + arm + wheels + hose
connection
Cyclone 2/1.8 kW Fume Exhausting unit FCT
Balanced arm torch holder 2,5m without strut
4 wheels trolley for CYCLONE 2/1,8 kW FCT
2m hose connection, complete of Ø50 mm
ring fi tting
CODE
1 MU0213 Cyclone 2/0,9 kW Fume Exhausting unit FCT
CYCLONE 2/0.9 kW SINGLE-PHASE Small, light, handy (only 15 kg and a length of 55 cm) but very sturdy and powerful thanks to the metal structure and 0.9 kW motor. Including pre-filter and cone for welding fumes expulsion. Ideal for non-intensive use with 60% duty cycle. Recommended for torches with air cooling. Start Stop activation device included (BX0236).
TECHNICAL DATA Cyclone 2/0.9 kW single-phase
220 V
0,9 kW
215 m³/h
60%
15 Kg
290xh350x550 mm
DEPRESSION 17.000 Pa
NOISE LEVEL 71 Db
CODE
8 DM0057
MU0214 INCLUDED
DM0060 INCLUDED
MU0216 INCLUDED
QB0134 INCLUDED
TECHNICAL DATA Cycone 2/1.8 kW single-phase
CODE
1 MU0214 Cyclone 2/1,8 kW Fume Exhausting unit FCT
220 V
1,8 kW
240 m³/h
60%
31 Kg
820xh460x320 mm
DEPRESSION 22.000 Pa
NOISE LEVEL 72 Db
AIR DEPURA TION CLASS 10 (0,3 µm at 98%)
CYCLONE 2/1.8 kW SINGLE-PHASE Extremely powerful and sturdy, thanks to the metal structure and the two 0.9 kW motors. Including pre-filter, microfilter and cone for the expulsion of welding fumes. Possibility of filtering fumes with the activated carbon filter as an option. Ideal for all uses, with air and water cooled torches. 60% duty cycle. Start Stop activation device included (BX0236).
CYCLONE 2/0.9 Kw Single-phase
CYCLONE 2/1.8 Kw Single-phase
37
CODE OPTIONAL CODE OPTIONAL
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
BW0094 Connection ring for the torche D.50/40 1
BW0309 Connection ring for the torche D.60/50 1
BW0495 Connection ring for the torche D.50/50 1
BW0691 “Y” connection for two torches fi tting 1
BX0209 2m extension for STAR/STOP device 1
BX0220 4m extension for STAR/STOP device 1
BX0227 6m extension for STAR/STOP device 1
BX0230 Jack connection to connect the second automatic
START/STOP 1
QB0133 10m hose connection, complete of D.50 ring fi tting
QB0135 4m hose connection, complete of D.50 ring fi tting
QB0136 6m hose connection, complete of D.50 ring fi tting
QB0137 8m hose connection, complete of D.50 ring fi tting
QB0138 Exhausting hose D.60 50m roll 50
QB0172 Exhausting hose D.60 5m 1
QB0173 Exhausting hose D.60 10m 1
QB0174 Exhausting hose D.60 15m 1
QB0175 Exhausting hose D.60 20m 1
QB0176 Exhausting hose D.60 25m 1
CODE
2 GB5096
3 GB5097
1 BX0236
5 MU0306
6 GB5094
7 FE0881
CODE
CODE
2 GB5114
1 BX0236
3 MU0306
CYCLONE 2/0.9 kW SPARE PARTS
CYCLONE 2/1.8 kW SPARE PARTS
CYCLONE 2/1.8 kW OPZIONAL ACCESSORIES FOR AIR FILTRATION
11
1
Automatic STAR/STOP clamp with 2 m
Filter/Output support boxfiltered air
Activated carbon fi lters 25x265x23mm - 1 Kg
0,35m/s
OPTIONAL (ORDER WITH
5-6)
OPTIONAL (ORDER WITH
5-6)
Automatic STAR/TOP clamp with 2 m
Cartridge pre-fi lter D. 280x390mm - 98% 1µ - 127g/m²
Cartridge micro-fi lter D. 180x375mm - 98% 0.3µ - 220g/m²
Single-phase motor 220V 50Hz 900W
Single-phase motor 220V 50Hz 900W
CYCLONE 2/0.9 kW - CYCLONE 2/1.8 kW SINGLE-PHASE
Pre-filter cartridge Ø280x390mm - 98% 1µ - 127 g/m²
1
1
1
1
38
trafi met.comFUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
CODE
DM0056
MU0209 INCLUDED
MU0211 INCLUDED
DM0055
MU0209 INCLUDED
DM0060 INCLUDED
MU0212 INCLUDED
QB0134 INCLUDED
CODE
MU0209
TECHNICAL DATA Cyclone 3/3.0 kW
380 V
3,0 Kw
260 m³/h
100%
58 Kg
650xh600x500 mm
DEPRESSION 33.000 Pa
NOISE LEVEL 71 Db
AIR DEPURATION CLASS 10 (0,3 µm at 98%)
MU0207
Trolleys and arms of the Cyclone 3 / 3.0 kW can also be used with the Cyclone 3 / 4.0 kw supplied separately.
TECHNICAL DATA Cyclone 3/4.0 kW
380 V
4,0 kW
270 m³/h
100%
60 Kg
650xh600x500 mm
DEPRESSION 31.000 Pa
NOISE LEVEL 71 Db AIR DEPURATION
CLASS 10 (0,3 µm at 98%)
CYCLONE 3/4.0 kW TRIPHASEThe most powerful fume vacuum extractor of Trafimet range, ideal for all double torch applications (2 air-cooled torches or 2 water cooled torches). 100% duty cycle.
Cyclone 3 are the top fume vacuum extractors of the Trafimet range, versatile and adaptable to the customer's needs. Possibility of :- connecting up to two aspiration torches thanks to the double outlet;- fixing on a two-wheeled trolley or on a four-wheeled trolley with balanced arm;- welding fumes filtration (progressive filter + absolute filter + active carbons filter) in option.Start Stop activation device included (BX0236).
CODE
CODE
2 wheels trolley for CYCLONE 3/3.0 kW
Cyclone 3/3.0 kW Fume Exhausting unit 50-60 Hz
FCT
Cyclone System 3/3.0 kW FCT + 2 wheels
Cyclone 3/3.0 kW Exhausting unit 50-60 Hz FCT
Cyclone System 3/3.0 kW FCT + arm + hose connection + 4 wheels
Cyclone 3/3.0 kW Exhausting unit 50-60 Hz
FCT
Balanced arm torch holder 2,5m without strut
4 wheels trolley for CYCLONE 1.5 Kw
2m hose connection, complete of d.50 ring fi tting
Cyclone 3/4.0 kW Exhausting unit 50-60 Hz FCT
CYCLONE 3/3.0 kW TRIPHASE Recommended for most applications. 100% duty cycle, ideal for all models of Trafimet suction torches. Recommended for 2 air cooled torches.
CYCLONE 3/3.0 kW Three-Phase CYCLONE 3/4.0 kW Three-Phase
39
CYCLONE 3/3.0 kW - CYCLONE 3/4.0 kW THREE-PHASE
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
Automatic STAR/STOP clamp with 2 m INCLUDED
Spacer frame fi lter Cyclone 3/3.0
OPTIONAL (ORDER WITH
2-3-4)
Progressive panel fi lter, mm310x460x25 98% 1µ
OPTIONAL (ORDER WITH
2-3-4)
Absolute panel fi lter, mm305x457x68 98% 0.3µ
OPTIONAL (ORDER WITH
2-3-4)
CODE OPTIONAL CODE OPTIONAL
BW0094 Connection ring for the torche D.50/40 1
BW0309 Connection ring for the torche D.60/50 1
BW0495 Connection ring for the torche D.50/50 1
BW0691 “Y” connection for two torches fi tting 1
BX0209 2m extension for BX0236 STAR/STOP device 1
BX0220 4m extension for BX0236 STAR/STOP device 1
BX0227 6m extension for BX0236 STAR/STOP device 1
BX0230 Jack connection to connect the second
automatic START/TOP device 1
GB5092 Cylindrical container for carbon fi lters 1
GB5093 Cartridge carbons fi lter 1,5 Kg 0,35m/s 1
QB0133 10m hose connection, complete of D.50 ring fi tting
QB0135 4m hose connection, complete of D.50 ring fi tting
QB0136 6m hose connection, complete of D.50 ring fi tting
QB0137 8m hose connection, complete of D.50 ring fi tting
QB0138 Exhausting hose D.60 50m roll 50
QB0172 Exhausting hose D.60 5m 1
QB0173 Exhausting hose D.60 10m 1
QB0174 Exhausting hose D.60 15m 1
QB0175 Exhausting hose D.60 20m 1
QB0176 Exhausting hose D.60 25m 1
CODE
1 BX0236
4 FE0882
2
GB5112 3
GB5113
STANDARD METALLIC PRE-FILTER OPTIONAL FILTERS
1
1
1
1
1
40
trafi met.com
CYCLONE 3B/3.0 kW Three-Phase
FUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
TECHNICAL DATA Cyclone 3B
MU0208 Cyclone 3B 3.0 kW fume exhausting unit FCT
380 V
3,0 Kw
260 m³/h
100%
50 Kg
400xh700x540 mm
DEPRESSION 30.000 Pa
NOISE LEVEL 71 Db
CYCLONE 3B THREE-PHASE New entry in the Trafimet range, Cyclone 3B is a compact and powerful fume vacuum extractor (same CYCLONE 3/3.0 kW turbine); suitable for all welding applications. Ideal for users who do not need to filter the aspirated fumes, and prefer to install the fume extractor in a fixed position (possibility to be placed on the ground thanks to the rubber feet or to be mounted on the wall thanks to the optional bracket) or to filter the fumes aspirated. Possibility of connecting two aspiration torches thanks to its double output. Start Stop activation device included.
CODE
1
CODE
2 FE0099 Wall support bracket
CODE
1 BX0236 INCLUDED
OPTIONAL
CODE OPTIONAL CODE OPTIONAL
BW0094 Connection ring for the torche D.50/40 1
BW0309 Connection ring for the torche D.60/50 1
BW0495 Connection ring for the torche D.50/50 1
BW0691 “Y” connection for two torches fi tting 1
BX0209 2m extension for BX0236 STAR/STOP device 1
BX0220 4m extension for BX0236 STAR/STOP device 1
BX0227 6m extension for BX0236 STAR/STOP device 1
BX0230 Jack connection to connect the second automatic START/
TOP 1
QB0133 10m hose connection, complete of D.50 ring fi tting
QB0135 4m hose connection, complete of D.50 ring fi tting
QB0136 6m hose connection, complete of D.50 ring fi tting
QB0137 8m hose connection, complete of D.50 ring fi tting
QB0138 Exhausting hose D.60 50m roll 50
QB0172 Exhausting hose D.60 5m 1
QB0173 Exhausting hose D.60 10m 1
QB0174 Exhausting hose D.60 15m 1
QB0175 Exhausting hose D.60 20m 1
QB0176 Exhausting hose D.60 25m 1
2
Automatic STAR/STOP clamp with 2 m
CYCLONE 3B/3.0 Kw THREE-PHASE
1
1
1
1
41All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
CODE
FB0689
TROLLEYS 2- or 4-wheel trolleys allow to move the Trafimetaspirators next to the workplace.
RECTANGULAR COLLECTOR It can be connected to all Trafimet aspirators. It works at high vacuum, it must be positioned near the point of emission of the fumes.On Cyclone 3 and 3B fume exhausting units, it can be combined with an aspiration torch.
MU0216
MU0212
CODE
MU0211
1
1a
2
2
11a
Rectangular collector 140x45 mm with magnetic clamp with hose 5 m
4 wheel trolley for CYCLONE 1.5 Kw
2 wheel trolley for CYCLONE 3/3.0 Kw
4 wheel trolley for CYCLONE 2/1,8 Kw FCT
ACCESSORIES & TROLLEYS
3
3
42
trafi met.comFUME EXTRACTION SYSTEM
All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
Balanced arm torch holder 2,5m without strut
ASSOCIABLE TO DM0065 - MU0212
- MU0216
Universal arm holder for DM0060
Balanced arm torch holder 2,5m trolling
ASSOCIABLE TO WITH DM0066
Arm holder for synergic welding machines
BALANCED ARMS
CODE
1
DM0060
1
2
DM0065
3 DM0061 1
4 DM0066
1
1
BALANCED ARMSComplete range of balanced arms. Possibility of fixing on:- 4-wheel trolleys (DM0060 + MU0212 or MU0216)- universal arm holder for compact machines (DM0065)- machines with wire feed unit (DM0061)- support for synergistic machines (DM0066)All arms can be adjusted up to 2.5 meters length, and are supplied with straps for pipe fixation included.Ideal both for aspiration and standard MIG torches. Recommended with 5 meters long torches.
1
2
3
4
5
6
Belt for torch locking 5 SPL000370 1
Handle for adjustment of the arm length 6 SPL000371 1
43All trademarks are of exclusive property of the respective companies. Data and images are indicative and may be changed in any time without notice. Copyright © 2016 Trafimet Group Spa
GIANT BALANCED ARMS
CODE
CODE
1 DM0071 1
1 DM0072 1
1 DM0073 1
1a DM0078 1
2a DM0074 1
2 DM0079 1
3 QB0134
1a DM0077 1
1a DM0076 1
3 QB0134
GIANT BALANCED ARMS WITH STABILIZED BASE WITH WHEELES
1a
1
2
2a
3
3
GIANT BALANCED ARMSRange of "giant" balanced arms up to 5 meters long. Possibility of fixing on the ground (1.83 meter column) or on a stabilized platform (1.53 meter column). The horizontal arm is hollow and allows the passage of fumes. Possibility of mounting any type of wire feed unit. Liner support included. Recommended torches length 5 meters.
GIANT BALANCED ARMS WITH FIXED FLOOR COLUMN
2m hose connection, complete of d.50 ring fi tting
2m hose connection, complete of d.50 ring fi tting
Big balanced arm torch holder 3,5m column 1,53 base
Big balanced arm torch holder 4,5m column 1,53 base
Big balanced arm torch holder 5m column 1,53 base
Stabilized base with wheels 1,25X1,40X0,4m
Arm holder for Cyclone 3/3.0
Big balanced arm torch holder 5m column 1,83M from fl oor
Big balanced arm torch holder 3,5m column 1,83M from fl oor
Big balanced arm torch holder 4,5m column 1,83M from fl oor
1
1
Distributor
Trafimet Shanghai Welding & Cutting Torches Co. Ltd20B01 No. 360, Heng Tong Road 200070 Shanghai, P.R. ChinaPh. +86 2134040500/01Fax +86 [email protected]
Representative officeTrafimet NordicStefan LindqvistSales Manager NordicPh. +46 304661020Fax +46 304661020Mobile +46 [email protected]
trafimetgroup.com
Trafimet Group SpA a socio unicoVia del Lavoro, 8 36020 CastegneroVicenza, ItalyPh. +39 0444739900Fax +39 [email protected]
Trafimet Schweisstechnik GmbH Im Gewerbegebiet 20 36289 FriedewaldDeutschlandPh. +49 66749000Fax +49 [email protected]
Trafimet Kaynak Sistemieri A.Ş. İkitelli O.S.B. Heskop H Blok Sinpaş İş Modern Ticaret Merkezi Kat3 no.66/1 Başakşehir 34490 İstanbul, TürkiyePh. +90 212 8091700Fax +90 212 [email protected]
ItalyPh. +39 0444 739800Fax +39 0444 739899
ExportPh. +39 0444 739900Fax +39 0444 739999
TCS SroRybnicna 38/G Street 83106 BratislavaSlovakiaPh. +42 1249112311Fax +42 [email protected]
Trafimet USA2237 West 77th StreetHialeah, FL 33016, USA Ph. +1 786 309 9329Toll free +1 800 535 1185 [email protected]
Jinan Trafimet Welding & Cutting Tools Co. LtdNo. 25 XinMaoQiLu Sci-tech Zone Zidong Road Tianqiao District 250119 Jinan City ShandongP.R. ChinaPh. +86 531 88090610Fax +86 531 88010828604 [email protected]
© 2016 Trafimet Group SpA a socio unico Edition 09/2019Code EA1328
FUME EXTRACTION SYSTEM