GRUNDFOS DATA BOOKLET
TP 80-70/4-A-F-A-BQQE 400Y 50HZ Grundfos pump 96108601
Thank you for your interest in our products. Please contact us for more information, or visit our website
https://www.lenntech.com/grundfos/TP000/96108601/TP-80-70-4-A-F-A-BQQE.html
[email protected]. +31 152 610 900 fax. +31 152 616 289
BE > THINK > INNOVATE
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. Description1 TP 80-70/4 A-F-A-BQQE
Product No.: On request
Single-stage, close-coupled, volute pump with in-line suction and discharge ports of identical diameter.The pump is of the top-pull-out design, i.e. the power head (motor, pump head and impeller) can beremoved for maintenance or service while the pump housing remains in the pipework.The pump is fitted with an unbalanced rubber bellows seal. The shaft seal is according to EN 12756.Pipework connection is via PN 16 DIN flanges (EN 1092-2 and ISO 7005-2).The pump is fitted with a fan-cooled asynchronous motor.
Further product detailsPumpPump housing and pump head are electrocoated to improve the corrosion resistance.Electrocoating includes:1) Alkaline-based cleaning.2) Pretreatment with zinc phosphate coating.3) Cathodic electrocoating (epoxy).4) Curing of paint film at 200-250 °C.
1: Pump housing2: Impeller3: Stub shaft4: Pump head/motor stool5: Wear rings
The pump housing is provided with a replaceable brass neck ring to reduce the amount of liquid runningfrom the outlet side of the impeller to the inlet side. The impeller is secured to the shaft with a nut.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the springand around the bellows. Due to the bellows, the seal does not wear the shaft, and the axial movementis not prevented by deposits on the shaft.Primary seal:
• Rotating seal ring material: silicon carbide (SiC)• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of thismaterial pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
A circulation of liquid through the duct of the air vent screw ensures lubrication and cooling of the shaftseal.The flanges have tappings for mounting of pressure gauges.
1/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionThe motor stool forms connection between the pump housing and the motor, and is equipped with amanual air vent screw for venting of the pump housing and the shaft seal chamber. The sealingbetween motor stool and pump housing is an O-ring.The central part of the motor stool is provided with guards for protection against the shaft and coupling.The pump shaft is fastened directly on the motor shaft with key and set screws.
MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.Electrical tolerances comply with IEC 60034.
The motor is flange-mounted with free-hole flange (FF).Motor-mounting designation in accordance with IEC 60034-7: IM B 5, IM V 1 (Code I) / IM 3001, IM3011 (Code II).
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.The motor does not incorporate motor protection and must be connected to a motor-protective circuitbreaker which can be manually reset. The motor-protective circuit breaker must be set according to therated current of the motor (I1/1).
The motor can be connected to a variable speed drive for adjustment of pump performance to any dutypoint. Grundfos CUE offers a range of variable speed drives. Please find more information in GrundfosProduct Center.
Technical data
Liquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³
Technical:Rated flow: 45.8 m³/hRated head: 5.9 mActual impeller diameter: 149 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3B
Materials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Cast ironEN-JL1030ASTM A48-30 B
Installation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 80Pump inlet: DN 80Pump outlet: DN 80Pressure rating: PN 16(@): 440 mmFlange size for motor: FF165
Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 4.85/2.80 A
2/12
Printed from Grundfos Product Centre [2018.06.003]
Position Qty. DescriptionStarting current: 820-900 %Cos phi - power factor: 0.71-0.64Rated speed: 1450-1460 rpmEfficiency: IE3 84,1%Motor efficiency at full load: 84.1 %Motor efficiency at 3/4 load: 84.6 %Motor efficiency at 1/2 load: 82.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): F
Others:Minimum efficiency index, MEI ≥: 0.68ErP status: EuP Standalone/Prod.Net weight: 70 kgGross weight: 84 kgShipping volume: 0.39 m³Danish VVS No.: 381715070Norwegian NRF no.: 9043582
3/12
Printed from Grundfos Product Centre [2018.06.003]
On request TP 80-70/4 A-F-A-BQQE 50 HzH
[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
Q [m³/h]0 5 10 15 20 25 30 35 40 45 50 55 60
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 80-70/4, 3*400 V, 50Hz
P[W]
0
200
400
600
800
1000
1200
1400
NPSH[m]
0
1
2
3
4
5
6
7
P1
P2
4/12
Printed from Grundfos Product Centre [2018.06.003]
H[m]
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
Q [m³/h]0 10 20 30 40 50
eta[%]
0
10
20
30
40
50
60
70
80
90
100
TP 80-70/4, 3*400 V, 50Hz
P[W]
0
200
400
600
800
1000
1200
NPSH[m]
0
1
2
3
4
5
6P1
P2
80
180 164
110180 180
178200
440
612
011
517
614
4
220
Rp 1/4
M16
L1 L2 L3
L3L2L1
LOW VOLTAGEDIRECTION OF ROTATION
HIGH VOLTAGEDIRECTION OF ROTATION
Description ValueGeneral information:Product name: TP 80-70/4 A-F-A-BQQEProduct No: On requestEAN number: On requestTechnical:Rated flow: 45.8 m³/hRated head: 5.9 mHead max: 70 dmActual impeller diameter: 149 mmPrimary shaft seal: BQQECurve tolerance: ISO9906:2012 3BPump version: AModel: AMaterials:Pump housing: Cast iron
EN-JL1040ASTM A48-40 B
Impeller: Cast ironEN-JL1030ASTM A48-30 B
Material code: AInstallation:Range of ambient temperature: -30 .. 60 °CMaximum operating pressure: 16 barFlange standard: DINPipe connection: DN 80Pump inlet: DN 80Pump outlet: DN 80Pressure rating: PN 16(@) 440 mmFlange size for motor: FF165Connect code: FLiquid:Pumped liquid: WaterLiquid temperature range: -25 .. 120 °CLiquid temperature during operation: 20 °CDensity: 998.2 kg/m³Electrical data:Motor type: 90SBIE Efficiency class: IE3Rated power - P2: 1.1 kWPower (P2) required by pump: 1.1 kWMains frequency: 50 HzRated voltage: 3 x 220-240D/380-415Y VRated current: 4.85/2.80 AStarting current: 820-900 %Cos phi - power factor: 0.71-0.64Rated speed: 1450-1460 rpmEfficiency: IE3 84,1%Motor efficiency at full load: 84.1 %Motor efficiency at 3/4 load: 84.6 %Motor efficiency at 1/2 load: 82.9 %Number of poles: 4Enclosure class (IEC 34-5): 55 Dust/JettingInsulation class (IEC 85): FMotor protec: NONEMotor No: 87220316Others:Minimum efficiency index, MEI ≥: 0.68ErP status: EuP Standalone/Prod.Net weight: 70 kgGross weight: 84 kgShipping volume: 0.39 m³Danish VVS No.: 381715070
80
180164
110
180180
178
200
440
220
Rp 1/4
M16
5/12
Printed from Grundfos Product Centre [2018.06.003]
Description ValueNorwegian NRF no.: 9043582
6/12
Printed from Grundfos Product Centre [2018.06.003]
On request TP 80-70/4 A-F-A-BQQE 50 Hzcos phi
eta
0.0
0.2
0.4
0.6
0.8
P2 [kW]0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4
I[A]
0.0
1.0
2.0
3.0
4.0
TP80-70/4 + 90SB 1.1 kW 3*400 V, 50 Hz
eta
cos phi
I
n[rpm]
1200
1300
1400
1500
1600
P1[kW]
0.0
0.4
0.8
1.2
1.6
n
P1
7/12
Printed from Grundfos Product Centre [2018.06.003]
On request TP 80-70/4 A-F-A-BQQE 50 Hz
Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.
80
180 164
110180 180
178200
440
612
011
517
614
4
220
Rp 1/4
M16
8/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view
301a
219
92
7
7a
77
301a
92
11
9
51
100
49
105
45
215a
215
18
217215a
534a534
531531a
28
17
251d
251a
6
11b
66a
67
530530a
9/12
Printed from Grundfos Product Centre [2018.06.003]
Sectional drawing (TM058200 for TPE2,TPE3)
4
2 13
5
TM058200
10/12
Printed from Grundfos Product Centre [2018.06.003]
Exploded view ( TM057026 for MGE model H/I )
251d
251b
290
287277a
286
277
273a
273
268268a289a289
288b288288a
251a
252b
156c
159d
156b
156d188
275a
153
154
158
178
185
192
191
159e
156c 156
151152
266
187
291
293
252a
172
150
287a
502
273b
157
11/12
Printed from Grundfos Product Centre [2018.06.003]
Parts list TP 80-70/4, Product No. On requestValid from 1.1.2011 (1152)
Pos Description Annotation Données de classification Référence Quantité Unité+ Motor 1 pcs- Nut 1 pcs
66 Washer 166a Spring lock washer 167 Nut Thread: M14 1
- Motor stool cpl. 1 pcs1a Motor stool 17 Coupling guard 29 Hex socket head cap screw Length (mm): 30 4
Thread: M1077a Pan head screw 4
- Pump housing cpl. 1 pcs6 Pump housing 119 Plug 120 Pipe plug Thread: R 3/8 236 Nut Thread: M10 6
- Shaft seal cpl. 1 pcs72a O-ring Diameter: 177,39 1
Material type: EPDMThickness: 3,53
105 Shaft seal 1- Stub shaft 1 pcs
9 Socket set screw Length (mm): 6 2Thread: M8
11 Parallel key Dimension: 6X6X35 151 Pump shaft 119 Plug 2 pcs49 Impeller 1 pcs
12/12
Disclaimer: The information about the Grundfos pump in this document may be outdated. Data may be subject to alterations without further notice. Please contact us to verify the data above is still accurate/up-to-date.
All information is copyright Grundfos.
[email protected]://www.lenntech.comtel. +31 152 610 900 fax. +31 152 616 289