GS1 Industry & Standards EventMarch 21-25, 2011 – Brooklyn, NY
Creating value together with global standards
Sustainability Global Packaging Project- GDSN
9:00-12:30, Thursday March 24 2011
Meeting for Everyone (IE meeting)
Facilitator : Diane Taillard, GS1
Chair : Leon Hall, Wal Mart
Sponsored by
© 2011 GS1Creating value together with global standards 2
Anti-Trust Caution
GS1 and the GSMP operate under the GS1 anti-trust caution. Strict compliance with anti-trust laws is and always has been the policy of GS1.
The best way to avoid problems is to remember that the purpose of the committee is to enhance the ability of all industry members to compete more efficiently.
This means:– There shall be no discussion of prices, allocation of customers, or
products, etc. – If any participant believes the group is drifting towards an impermissible
discussion, the topic shall be tabled until the opinion of counsel can be obtained.
– The full anti-trust caution is available in the Community Room if you would like to read it in its entirety
© 2011 GS1Creating value together with global standards 3
Meeting Etiquette
Meetings will begin promptly at designated start times
Avoid distracting behaviour:• Place all mobile devices on silent mode
• Avoid cell phones
• Avoid sidebar conversations
Speak in turn and be respectful of others
Be collaborative in support of the meeting objectives
© 2011 GS1Creating value together with global standards
Agenda
4
Topic Speaker
Introduction Chair : Leon Hall, Wal-Mart
Sustainability and GS1 Diane Taillard, GS1
GPP : The Consumer Goods Forum Metrics for Packaging Sustainability
Leon Hall, Wal-Mart
How will GDSN support GPP metrics Pete Alvarez, GS1
Sharing experience : GS1 Canada and Sustainability
Antonella Candido, GS1 Canada
Status and next steps overview Diane Taillard, GS1
Preparing the launch of the GSMP group Mike Mowad, GS1
Conclusion Chair : Leon Hall, Wal-Mart
Sustainability and GS1Diane Taillard, GS1
© 2011 GS1Creating value together with global standards
Did you know?
“76% of companies have incorporated sustainability criteria into some or all of their supply chain management processes.”
Source: Aberdeen report, The Sustainable Supply Chain (2010) – survey on 360 companies
6
What is GS1 doing to support sustainability ?
© 2011 GS1Creating value together with global standards
GS1 : a key enabler of sustainable supply chain
7
1) by supporting the exchange of sustainability-related information throughout the value chain
2) by reducing wasted ressources in the supply chain thanks to the implementation of GS1 standards
© 2011 GS1Creating value together with global standards
Sustainability Associations and initiatives (non exhaustive)
8
CARBON DISCLOSURE PROJECT
© 2011 GS1Creating value together with global standards
Roles & Relationships in Sustainability
Trading Partners Supplying
Input and RequirementsRetailers, Distributors, Operators, Manufacturers, Raw Material Suppliers Governmental and Non-
Governmental Organizations, Academia
Technology and Solution Partners Supplying Solutions
Dashboards, Data Pools, ERPs, Reporting Tools
Industry alignment CGF (Global), CCGD, FCPC, CFIG, RCC (CA);
FMI, GMA,RILA (US) and other trade associations
Standards and Implementation Support
Global Office and Member Organizations
Research and SciencesSustainability Consortium and other
organizations
9
GPP : The Consumer Goods Forum Metrics for Packaging Sustainability
Leon Hall
Wal-Mart
© 2011 GS1Creating value together with global standards 11
© 2011 GS1Creating value together with global standards 12
© 2011 GS1Creating value together with global standards 13
© 2011 GS1Creating value together with global standards 14
© 2011 GS1Creating value together with global standards 15
© 2011 GS1Creating value together with global standards 16
© 2011 GS1Creating value together with global standards 17
© 2011 GS1Creating value together with global standards 18
© 2011 GS1Creating value together with global standards 19
© 2011 GS1Creating value together with global standards 20
© 2011 GS1Creating value together with global standards 21
© 2011 GS1Creating value together with global standards 22
© 2011 GS1Creating value together with global standards 23
How will GDSN support the GPP MetricsPete Alvarez, GS1
© 2011 GS1Creating value together with global standards
The GPP and the GDSN
• Manufacturers and retailers are planning to exchange packaging data to fulfill specific sustainability metrics
• They would like to leverage the Global Data Synchronization Network, GLN and GTIN to facilitate this exchange of data
25
© 2011 GS1Creating value together with global standards
Metrics and the GDSN
• The GPP metrics are set by the Consumer Goods Forum and specifically the Global Packaging Group (CGF)
• GS1 does not set or chance the GPP metrics
• GDSN attributes simply provide a means for trading partners to exchange the data needed to satisfy the metrics
• GS1 maintains the standards required to satisfy the data needs of the GPP metrics
• The CGF maintains the metrics
26
© 2011 GS1Creating value together with global standards 27
From pilots to automated exchange of information?
© 2011 GS1Creating value together with global standards
Source Source
Data PoolData PoolRecipientRecipient
Data PoolData Pool
GS1 GS1
Global Global
RegistryRegistryTMTM
GDSN
GDSN Support for GPP Metrics
28
Unit Case Pallet
GTIN
1. Load GTIN Data
2. Register Data
4. Publish Data
3. SubscriptionRequest
4. Publish Data
3. SubscriptionRequest
3. SubscriptionRequest
GLN
GLN
Retailer
GLN
Manufacturer
GLN
GS1 Canada and Sustainability
Antonella Candido, GS1 Canada
© 2011 GS1Creating value together with global standards
GS1 Canada Engagement History
• June 2009 Retailers in Canada engaged at trade association level regarding different sustainability initiatives
• Evident that that subject permeated supply chain• GS1 Canada was asked to engage based on
successful implementation of supply chain standards• North American (and global) alignment determined as
critical
© 2011 GS1Creating value together with global standards
GS1 Canada Roles
© 2011 GS1Creating value together with global standards
GS1 Canada’s Role in Packaging Sustainability Project
Role in Packaging Sustainability initiative:
• Facilitate community consensus standards development for packaging sustainability
• Ensure that all supply chain stakeholders are consulted in developing this industry standard
• Liaise with GS1 US in order to ensure consensus in North America
• Bring Canadian/North American requirements to a global standards building forum
© 2011 GS1Creating value together with global standards
Packaging Sustainability Working Group and Stewardship Initiative
• Working group to help prioritize community implementation in Canada for standardized GPP metrics
• Moving forward with local recycling program initiative
34
Contact Details
GS1 Canada
1500 Don Mills Road
Toronto, Ontario CANADA
T 416.380.2511
W www.gs1ca.org
Status and next steps overviewDiane Taillard, GS1
© 2011 GS1Creating value together with global standards
Status of GPP-GDSN
• GPP metrics Version 2 under finalisation
• Work Request and Statement of Business Needs done
• GSMP Group Charter under preparation
37
© 2011 GS1Creating value together with global standards
GPP V2- GDD gap analysis learnings
• Metrics have multiple components• Definitions to clarify or to complete• GDD cross over• Metrics may be linked to party or to packaging (not
GTIN level)• Links to other work efforts (Chemical ingredients)
38
© 2011 GS1Creating value together with global standards
Next steps
• GPP Metrics V2 will be « made GS1 ready »
• Call To action for GSMP GPP-GDSN group to be issued
39
Status and next steps overviewMike Mowad, GS1
Global Standards Management Process ©2011 GS141
Enabling the Global Packaging Project Metrics & Indicators
February, 2011
GPP-GDSN : A collaboration
Global Standards Management Process ©2011 GS142
Due Process Influence & Importance
• GS1 has a strong reputation as a Standards Development Organization that delivers globally acceptable standards as progressed by user working groups to ratification
• Due process and open reviews ensure consideration of and response to comments by interested parties as the proposed technical standard progresses toward ratification
• Standards Development Organizations [ISO, ITU-T, GS1, etc.] must ensure due process and open review to avoid scrutiny of standards that could be subject to claims of development for self interest
Global Standards Management Process ©2011 GS143
Step 4 Deployment
Step 3 Development
Step 2 Requirements
Step 1Business Need
GSMP 4 Step Process Overview
Virtual Motion to Develop
Virtual Motion to Develop
Public Review
(30 days)
• Community• Architecture
Public Review
(30 days)
• Community• Architecture
SBNSBN
GS1 Working GroupGS1 Working Group
Business Requirements Identified and Documented
(BRAD)
Business Requirements Identified and Documented
(BRAD)
Public Review
(30 days)
• Community• Architecture
Public Review
(30 days)
• Community• Architecture
Community eBallot
Community eBallot
Integration into GDSN
Integration into GDSN
IP Review & Ratification
IP Review & Ratification
GS1 Industry EngagementGS1 Industry Engagement
BMSBMS
BSD(Paper)
BSD(Paper)
TSD(Code)
TSD(Code)
Working Group
Charter
Working Group
Charter
POC Approval
POC Approval
Global Standards Management Process ©2011 GS144
GSMP Working Group Dependencies
• The Working Group Charter is approved a GSMP governance group called the Process Oversight Committee
• Minimum of 18 organisations opt-in as participants in order for the GSMP Working Group to form:
• 6 End Users from one side of the trading relationship (supplier)
• 6 End Users from the other side of the trading relationship (retailer)
• 6 MOs ( or Certified Data Pools)
• CGF GPP final approved Metrics & Indicator Requirements with completed Definitions and Use Cases
Global Standards Management Process ©2011 GS145
Working Group Voting Minimums
• A minimum of 12 organisations must vote
• Within the minimum number, a minimum balance of different participant roles must be achieved:
• At least 2 End Users from one side of the trading relationship (supplier)
• At least 2 End Users from the other side of the trading relationship (retailer)
• At least 2 MOs ( or Certified Data Pools)
• The vote carries if the at least 2/3 of the total votes are cast as “yes” votes
Contact Details
Mike MowadGlobal Standards Manager, GS1T +1 (609) 557-4568E [email protected]
Kerry AngeloSr. Director GS1 Standards Mgmt & TechnologyT +1 (609) 557-4532E [email protected]
Conclusion
Contact Details
GS1 Global Office
Avenue Louise 326, bte 10
B-1050 Brussels, Belgium
T + 32 2 788 78 00
W www.gs1.org