HiQ Solar TrueString Inverters A Natural Fit for Rapid Shutdown
690.12 Rapid Shutdown Evolution*
No Requirement <30V Beyond 10ft of the Array Boundary Within 10s#
<30V Beyond 1ft of the Array Boundary Within 30s
<80V Within the Array Boundary
NEC 2011 and prior ✔
NEC 2014 ✔
NEC 2017 ✔
NEC 2017 after 1st Jan, 2019
✔
NEC Compliant• Satisfies NEC 2014 Rapid Shutdown ‘10 foot rule’
requirements, within 10 seconds• Satisfies NEC 2017 Rapid Shutdown ‘1 foot rule’
requirements• Install under the array, throw the switch and the array
is isolated as per code requirements
Easy Design• Zero footprint within mandated walkways• Does not require cumbersome additional cradles to comply• Each string can be a different length
Easy Installation• AC and DC connectors are the certified means of disconnect,
saving cost• No special mounting, cradles, shade structures or
fireproofing required• Easy on, easy off, without hoists
Easy Maintenance• None required• Easy one-person replacement:
• 24 lb. is easy to carry onto and off the most demanding rooftop
• Connectors make install and replacement fast and simple• No fans, filters or airflow requirements
* Abbreviated requirements. Refer to respective NFPA 70® National Electrical Code® editions for more details. www.nfpa.org# As published, extended to 30s through TIA 14-10, effective date August 24th, 2016
© HiQ Solar Inc. 7th-Feb-2017, RPS-01-USData subject to change without notice
2030 Duane Avenue, Santa Clara, CA [email protected], www.hiqsolar.com
Examples 2014 & 2017 Compliant TrueString Installs