Download pptx - How to extrude from existing material with associative constraints

CAE/FEM supplemental slides Arizona State University

1

How to extrude from existing material with associative constraints

• Create new plane on face• Sketch

– Draw– Dimension– (Optional) constrain– Generate

• Extrude– Select sketch– Select add or cut material– Set depth and direction– Generate


2


3


4

Click 1 2 3 4

1

2

3

4


5

In modeling select the new plane.Switch to sketching and draw the sketch.


6

Dimension to edge: Click 1 2 3 4 5

1 234

5

Right click dimension name to delete mistake


7

(Optional) Another approach: symmetry constraints

1

2

3


8

(Optional) Another approach: symmetry constraints

1

2

3


9

Constraining the reference lineNote constrained objects turn blue

1

2 (line)

3 (pt)

4 5


10

Applying symmetry constraintNote constrained objects turn blue

123

4


11

Creating extrude featureNote: hard to select lines out of a sketch. Best to extrude the whole sketch. Make multiple sketches if needing different features.

1

2

3

4


12

Check or modify Direction, Depth, then Generate


13

Edit constraints and dimensions till Done!


14

Note 1

• Sketching>Modify>Trim to remove mistakes.• Sketching>Details>Show constraints.

Occasionally you may want to delete inferred constraints.

• Click the “select mode” button to escape zoom commands.


15

Note 2: can create “named selections” to speed up repeated selection process in Setup

12

3 5

4