Transcript

How to shutdown computer after backupOct 13, 2014

In Backup4all you can set different actions to be executed after the backup: shutdown, log off, stand by orhibernate. Such an action will be executed only after the backup is finished and the result of the action afterbackup will not be logged in Backup4all.

Summary

In Backup4all you can set different actions to be executed after the backup: shutdown, log off, stand by orhibernate. Such an action will be executed only after the backup is finished and the result of the action afterbackup will not be logged in Backup4all.

On this page:

How to set shutdown / stand by / log off / hibernate computer after backupHow to set additional options for action after backup

How to set shutdown / stand by / log off / hibernate computer after backup

To set the action after backup (shutdown, log off, stand by or hibernate), please open Backup Properties andgo to “Advanced” page. In the “Run action after backup” section, you will find the “Run program or action”checkbox. Please select it and you will be able to access the action field.

Available predefined actions are:

<Stand by> - selecting this option, the computer will enter in the Stand by state after the backup isexecuted.<Hibernate> - selecting this option, the computer goes in Hibernate (if available) after the backupexecution.<Log off> - selecting this option, the computer will close all applications and will logs off current user.When force parameters is set (example: <Log off /f>), the system will force applications to be closed.Force parameter might cause some applications to loose unsaved data.<Shut down> - selecting this option, the computer will be Shut down. When force parameters is set(example: <Shut down /f>), the system will force applications to be closed. Force parameter mightcause some applications to loose unsaved data.

How to set additional options for action after backup

Run only once

If this option is set, the action will run only once at the next backup execution and the Run program/actionoption will be reset and disabled.

How to shutdown computer after backup http://www.backup4all.com/kb/how-to-shutdown-computer-after-backup...

1 of 2 1/19/2015 10:48 AM

Run program or action on

You can set conditions to run the action after the backup: on Success, on Warnings or on Errors. You cancheck multiple options or a single one, but at least one option must be checked.

Please note Backup4all won’t wait for the after backup action in order to finish the backup. It will onlytrigger the action at the end of the backup.

Applies to:

Backup4all 5.x

NEW: Backup4All 5.2.663

How to shutdown computer after backup http://www.backup4all.com/kb/how-to-shutdown-computer-after-backup...

2 of 2 1/19/2015 10:48 AM


Recommended