Implant Crown and FPD Treatment Planning
The codes D6065 – D6067 refer to implant crowns that are screwed directly to the implant fixture with no intermediate
abutment (UCLA type crowns for example). The codes D6075 – D6077 refer to implant FPD retainers that are screwed
directly to the implant fixture with no intermediate abutment (NOT CEMENTED)
Typical implant crowns and implant FPD retainers have either pre-fabricated or custom abutments to support the crown
or FPD retainer on the implant fixture. The new codes for treatment planning purposes are as follows:
D6056: A prefabricated abutment selected for an implant fixture that will support a fixed unit.
D6057: A custom made abutment that will be placed on an implant fixture to support a fixed unit
D6058 – D6064: Various single unit fixed units to be used in combination with either abutment code
D6068 – D6074: Various FPD Retainer fixed units to be used in combination with either abutment code
See the following examples for correct use and sequencing of these codes.
If there is some doubt as to the type of abutment (pre-fab vs. custom) please treatment plan with the more commonly
used prefabricated abutment code. If it needs to be changed at a later date contact the Axium Clinical Systems
Administrator ([email protected]) for assistance.
COMMONLY USED CODES FOR IMPLANT CROWNS
CODE DESC
D6056 prefabricated abutment - includes placement D6057 custom abutment - includes placement D6058 abutment supported porcelain/ceramic crown D6059 abutment supported porcelain fused to metal crown (high noble metal) D6060 abutment supported porcelain fused to metal crown (predominantly base metal) D6061 abutment supported porcelain fused to metal crown (noble metal) D6062 abutment supported cast metal crown (high noble metal) D6063 abutment supported cast metal crown (predominantly base metal) D6064 abutment supported cast metal crown (noble metal) D6065 implant supported porcelain/ceramic crown D6066 implant supported porcelain fused to metal crown (titanium, titanium alloy, high noble metal) D6067 implant supported metal crown (titanium, titanium alloy, high noble metal) D6068 abutment supported retainer for porcelain/ceramic FPD D6069 abutment supported retainer for porcelain fused to metal FPD (high noble metal) D6070 abutment supported retainer for porcelain fused to metal FPD (predominantly base metal) D6071 abutment supported retainer for porcelain fused to metal FPD (noble metal) D6072 abutment supported retainer for cast metal FPD (high noble metal) D6073 abutment supported retainer for cast metal FPD (predominantly base metal) D6074 abutment supported retainer for cast metal FPD (noble metal) D6075 implant supported retainer for ceramic FPD
D6076 implant supported retainer for porcelain fused to metal FPD (titanium, titanium alloy, or high noble metal)
D6077 implant supported retainer for cast metal FPD (titanium, titanium alloy, or high noble metal)
Treatment Plan For:
Single implant crown supported by a pre-fabricated abutment
v
Treatment plan For:
Two single implant crowns supported by a pre-fabricated abutments
NOTE CORRECT SEQUENCING
Treatment plan after approval
NOTE CORRECT SEQUENCING
Treatment Plan For:
Three unit implant FPD supported by a custom abutments
NOTE CORRECT SEQUENCING
Final treatment after approval of two pre-fabricated abutment
supported PFM crowns and a three unit custom abutment supported
FPD properly sequenced (viewed using the “Planned/In Process tab
and turning off the notes and deleted lines to remove the chart clutter)