A Glimpse of Industrial Polymers
CONTENTS 2
What is ‘polymer’ and ‘plastic’?
Two types of polymerization reactions
Chain polymerization examples
Step growth polymerization examples
Comparison of two types
Rubber, Vulcanization, Synthetic elastomers
Synthetic Fibers
Synthetic Films
Biodegradable plastic
• Polymers are large molecules that are formed from
relatively small molecular fragments known as monomers
that are bonded together repetitively.
• Wool, cotton, silk, wood and leather are examples of
natural polymers that have been known and used since
ancient times. This group includes biopolymers such as
proteins and carbohydrates that are constituents of all
living organisms.
• Synthetic polymers, which includes the large group known
as plastics, came into prominence in the early twentieth
century.
3
POLYMERIZATION REACTION
Converts monomers into macromolecule. May involve catalysts.
(i) Step growth or Condensation and (ii) Addition or Chain reactions are the two main types of polymerization reactions.
Condensation reaction
• Addition reaction
4
5
6
7
ADDITION POLYMERS 8
One of the major breakthroughs in polymer chemistry
occurred in the early 1950s when the German chemist Karl
Ziegler discovered a group of catalysts that could efficiently
polymerize ethylene.
At about the same time, Giulio Natta (Italian) made the first
isotactic (and crystalline) polyethylene.
The Zieglar - Natta catalysts revolutionized polymer
chemistry by making it possible to control the stereo-
regularity of these giant molecules. The two shared the
1963 Nobel Prize in Chemistry.
9
Step growth polymerization requires that the monomers
possess two or more kinds of functional groups that are
able to react with each other in such a way that parts of
these groups combine to form a small molecule (often
H2O) which is eliminated from the two pieces. The now-
empty bonding positions on the two monomers can then
join together .
10
11
12
13
Thermoset polymer Bakelite 14
Phenolic resins
These are made by condensing one or more types of phenols
(hydroxy - substituted benzene rings) with formaldehyde, as
illustrated above. This was the first commercialized synthetic
molding plastic.
The brown material (usually bulked up with wood powder)
was valued for its electrical insulating properties (light
fixtures, outlets and other wiring devices).
15
Making plastics from polymer
• A plastic contains a polymerized organic substance of large
molecular weight as an essential ingredient, is solid in its
finished state, and in its processing into finished articles
can be shaped by flow. Plasticizers, fillers etc., are also
added to alter the properties of the plastic products.
• Thermosetting plastics are processed by heat curing to
produce an infusible or insoluble product.
• Thermoplastics are processed by heating to soften them
and cooling to harden them. Process may be repeated.
16
17
Commercial step growth polymers
18
19
Raw Materials
Monomers: vinyl chloride, ethylene, propylene and similar simple hydrocarbons
Chemical intermediates : phenol, formaldehyde, hexamethylenetetramine, phthalic anhydride, methyl acrylate and methacrylate
Other raw materials: plasticizers, fillers, and reinforcements are also added to alter the properties of the plastic products.
20
RUBBER
Vulcanization creates disulfide cross-links that prevent the
polyisoprene chains from sliding over each other. The
degree of cross-linking can be controlled to produce a
rubber having the desired elasticity and hardness. More
recently, other kinds of chemical treatment (such as
epoxidation) have been developed to produce rubbers for
special purposes.
21
Vulcanization creates disulfide cross-links that prevent the
polyisoprene chains from sliding over each other. The
degree of cross-linking can be controlled to produce a
rubber having the desired elasticity and hardness. More
recently, other kinds of chemical treatment (such as
epoxidation) have been developed to produce rubbers for
special purposes.
22
Synthetic Fibers and their Applications
Polyamides –They are used in home furnishings, especially carpets.
Acrylics and Modacrylics – polyacrylonitrile is the major component of several industrial textile fibers.
Spandex – It is used in foundation garments, hose, swimwear and other elastic products.
23
Other Synthetic Fibers
Polyolefins – They excel in special cases, such as ropes, laundry nets, carpets, blankets and backing for tuffed carpets, but are difficult to dye and their melting point is low.
Fluorocarbons – It is widely used in pump packings and shaft bearings.
Glass Fibers – are used for electrical insulation in motors and generators, structural reinforcement of plastics, fire-proof wall coverings and tire cords.
24
25
Films
are made from different polymers such as polyesters, polyvinyl chloride, etc.
26
3 Common Types of Film Processing
Slit-die process – produces flat sheets by extruding the molten polymer through a slit-die into a quenching water bath or onto a chilled roller.
Blow-extrusion Process – produces tubular film by using air pressure to force the molten polymer around a mandrel.
Calendering – preparation of film is produced by feeding a plastic mix of polymer, stabilizer, and plasticizers between two heated roll where it is squeezed into a film.
Biodegradable disposable plastic 27
Interest in biodegradable disposable plastic items has steadily grown
because of the environmental problems caused by non-degradable
synthetic polymers.
Disposable packaging materials used to ship and protect purchased
items as well as disposable containers used for food and drink are of
special interest.
The idea that one time use items can be disposed of with the peace of
mind, that they will not remain for centuries in a landfill, or as litter, is
one of the tenets driving the recent interest in "green" technologies and
lifestyles.
28
With packaging materials, the reduction in usage of raw
materials, re-use and recycling is of course the best route to
sustainable lifestyle.
However, for various reasons, in practice, much of the
material ends up being discarded to a landfill or accidentally
shows up as litter.
For these instances, it is advantageous to have a plastic
material that would biodegrade when exposed to
environments where other biodegradable materials are
undergoing decay.
29
What is Biodegradable?
Biodegradation is degradation caused by
biological activity, particularly by enzyme action
leading to significant changes in the material's
chemical structure. In essence, biodegradable
plastics should breakdown cleanly, in a defined
time period, to simple molecules found in the
environment such as carbon dioxide and water.
Polymer Science and Technology Books 30
F. W. Billmayer, Textbook of Polymer Science 3rd
edition, 1984, John Wiley & Sons, Singapore
F. Rodriguez, Principles of Polymer systems, 4th
edition, 1996, Taylor & Francis.
Dryden’s Outline of Chemical Technology for 21st
Century, 3rd edition, chapter V a) Polymerization
Fundamentals, b) Polymerization Technology.