Based on the US Government M50/JSGPM (Joint Services General Purpose Mask) Program, the 53-Series Protective Mask was specifically developed to meet the unique requirements of Special Operations Units. The 53-Series Protective Mask was developed to counter the multiple threats encountered on the modern battlefield, war on terrorism and peace keeping operations around the world. It provides excellent protection against traditional chemical and biological warfare agents, select Toxic Industrial Materials (TIMs) and particulate matter including radioactive dust.
The M53 will function as a conventional negative pressure mask as well as with a range of SCBA (Self Contained Breathing Apparatus) and PAPR (Powered Air Purifying Respirator). This is achieved without the need to remove or change any components. CCBA (Closed Circuit Breathing Apparatus) capability is provided with an exhalation valve adapter.
ONE M
ASK,
ALL
MIS
SION
S
■ The unique chlorobutyl/silicone blend face piece material ensures the mask is not only high in protection but also provides a better seal and is more comfortable to wear for extended periods
■ Flexible polyurethane lens minimizes eye stress and maximizes field of view
■ The lens provides improved ballistic protection as well as excellent scratch resistance
■ Additional outserts are available to provide sunlight and laser protection
■ A clear outsert is also offered for additional scratch protection in extreme environments and blue blocker to reduce haze while also improving overall ballistic protection
■ The harness and buckles provide improved comfort and compatibility with ballistic helmets and communication gear
■ New reflex seal provides high levels of protection and comfort
■ Available in 4 sizes and interchangeable silicone nosecup for custom fit
■ Right- or left-handed which provides the best cheek-to-stockweld available on the market
Operator Protection and Comfort
M53+ParticulateParticulate and CS/CN Protection
M53+General Purpose NBC filter configuration
■ Equipped with a standard Electronic Communications Port (ECP) for radio and voice amplification interface
■ Internal microphone assembly offers enhanced speech performance
■ Low profile, exterior mounted amplifier is available for inter-team communication
■ 2-pin pass-through allows for simple integration with a variety of off -the- shelf communications devices
Filtration
Communications
■ The flexible, panoramic eyelens minimizes visual stress and maximizes field of view; provides ballistic protection and scratch resistance
■ Vision correction assembly for prescription lenses
■ 6 point skull cap head harness with low profile pre-adjusted brow and temple straps
■ Fail safe, high flow hydration system connects to hydration bladders and canteens
Operational Flexibility
Key Features
■ The most operationally flexible mask
■ The Valve Cassette Assembly (VCA) provides the unique capability to use the 53-Series Protective Mask with a variety of PPE (Personal Protective Equipment) without the need to remove or change any components.
■■ APR (Air Purify Respirator)- A negative pressure mask using NATO thread filters
■■ SCBA (Self Contained Breathing Apparatus)
■■ PAPR (Powered Air Purifying Respirator)
■■ CCBA (Closed Circuit Breathing Apparatus)
■ Combination SCBA and PAPR Apparatus
The 53-Series mask is operational in the following modes:
ONE MASK, ALL MISSIONS.
The M53 respirator falls within the definition of Significant Military Equipment in the United States Munitions List, International Traffic in Arms Regulations and may only be supplied outside of the United States of America to customers who are licensed by the US Department of State, Directorate of Defense Trade Controls.
M53 Mask Specifications
CBRN Agent Resistance
Mustard (H)
Greater than 24 HoursSarin (GB)
Soman (GD)
VX
Laboratory Protection Factor performance (Sodium chloride) Greater than 10,000
Breathing Performance (excluding filter)
Re-breathing CO2 0.8%
Inhalation Resistance at:
85 l/Min 15 mm WG
160 l/min 32 mm WG
Exhalation resistance negative pressure mode:
85 l/min 15 mm WG
160 l/min 30 mm WG
Exhalation resistance positive pressure mode: 40 mm WG
Weight
M53 mask (excluding filter) 1.6 lbs.
Field of view
Visual field Score - NIOSH CBRN standard 96
Materials used
M53 Mask Visor Flexible polyurethane
M53 Mask Facepiece Chlorobutyl/Silicone Rubber
Hydration
Drinking Flow Rate >230 ml/min
GS07F0285V www.avon-protection.com1 888 AVON 440
MADE IN AMERICA
GR0
0326
-08
ONE MASK, ALL MISSIONS.
Based on the US Government M50/JSGPM (Joint Services General Purpose Mask) Program, the 53-Series Protective Mask was specifically developed to meet the unique requirements of Special Operations Units. The 53-Series Protective Mask was developed to counter the multiple threats encountered on the modern battlefield, war on terrorism and peace keeping operations around the world. It provides excellent protection against traditional chemical and biological warfare agents, select Toxic Industrial Materials (TIMs) and particulate matter including radioactive dust.
The M53 will function as a conventional negative pressure mask as well as with a range of SCBA (Self Contained Breathing Apparatus) and PAPR (Powered Air Purifying Respirator). This is achieved without the need to remove or change any components. CCBA (Closed Circuit Breathing Apparatus) capability is provided with an exhalation valve adapter.
ONE M
ASK,
ALL
MIS
SION
S
■ The unique chlorobutyl/silicone blend face piece material ensures the mask is not only high in protection but also provides a better seal and is more comfortable to wear for extended periods
■ Flexible polyurethane lens minimizes eye stress and maximizes field of view
■ The lens provides improved ballistic protection as well as excellent scratch resistance
■ Additional outserts are available to provide sunlight and laser protection
■ A clear outsert is also offered for additional scratch protection in extreme environments and blue blocker to reduce haze while also improving overall ballistic protection
■ The harness and buckles provide improved comfort and compatibility with ballistic helmets and communication gear
■ New reflex seal provides high levels of protection and comfort
■ Available in 4 sizes and interchangeable silicone nosecup for custom fit
■ Right- or left-handed which provides the best cheek-to-stockweld available on the market
Operator Protection and Comfort
M53+ParticulateParticulate and CS/CN Protection
M53+General Purpose NBC filter configuration
■ Equipped with a standard Electronic Communications Port (ECP) for radio and voice amplification interface
■ Internal microphone assembly offers enhanced speech performance
■ Low profile, exterior mounted amplifier is available for inter-team communication
■ 2-pin pass-through allows for simple integration with a variety of off -the- shelf communications devices
Filtration
Communications
■ The flexible, panoramic eyelens minimizes visual stress and maximizes field of view; provides ballistic protection and scratch resistance
■ Vision correction assembly for prescription lenses
■ 6 point skull cap head harness with low profile pre-adjusted brow and temple straps
■ Fail safe, high flow hydration system connects to hydration bladders and canteens
Operational Flexibility
Key Features
■ The most operationally flexible mask
■ The Valve Cassette Assembly (VCA) provides the unique capability to use the 53-Series Protective Mask with a variety of PPE (Personal Protective Equipment) without the need to remove or change any components.
■■ APR (Air Purify Respirator)- A negative pressure mask using NATO thread filters
■■ SCBA (Self Contained Breathing Apparatus)
■■ PAPR (Powered Air Purifying Respirator)
■■ CCBA (Closed Circuit Breathing Apparatus)
■ Combination SCBA and PAPR Apparatus
The 53-Series mask is operational in the following modes:
ONE MASK, ALL MISSIONS.
Based on the US Government M50/JSGPM (Joint Services General Purpose Mask) Program, the 53-Series Protective Mask was specifically developed to meet the unique requirements of Special Operations Units. The 53-Series Protective Mask was developed to counter the multiple threats encountered on the modern battlefield, war on terrorism and peace keeping operations around the world. It provides excellent protection against traditional chemical and biological warfare agents, select Toxic Industrial Materials (TIMs) and particulate matter including radioactive dust.
The M53 will function as a conventional negative pressure mask as well as with a range of SCBA (Self Contained Breathing Apparatus) and PAPR (Powered Air Purifying Respirator). This is achieved without the need to remove or change any components. CCBA (Closed Circuit Breathing Apparatus) capability is provided with an exhalation valve adapter.
ONE M
ASK,
ALL
MIS
SION
S
■ The unique chlorobutyl/silicone blend face piece material ensures the mask is not only high in protection but also provides a better seal and is more comfortable to wear for extended periods
■ Flexible polyurethane lens minimizes eye stress and maximizes field of view
■ The lens provides improved ballistic protection as well as excellent scratch resistance
■ Additional outserts are available to provide sunlight and laser protection
■ A clear outsert is also offered for additional scratch protection in extreme environments and blue blocker to reduce haze while also improving overall ballistic protection
■ The harness and buckles provide improved comfort and compatibility with ballistic helmets and communication gear
■ New reflex seal provides high levels of protection and comfort
■ Available in 4 sizes and interchangeable silicone nosecup for custom fit
■ Right- or left-handed which provides the best cheek-to-stockweld available on the market
Operator Protection and Comfort
M53+ParticulateParticulate and CS/CN Protection
M53+General Purpose NBC filter configuration
■ Equipped with a standard Electronic Communications Port (ECP) for radio and voice amplification interface
■ Internal microphone assembly offers enhanced speech performance
■ Low profile, exterior mounted amplifier is available for inter-team communication
■ 2-pin pass-through allows for simple integration with a variety of off -the- shelf communications devices
Filtration
Communications
■ The flexible, panoramic eyelens minimizes visual stress and maximizes field of view; provides ballistic protection and scratch resistance
■ Vision correction assembly for prescription lenses
■ 6 point skull cap head harness with low profile pre-adjusted brow and temple straps
■ Fail safe, high flow hydration system connects to hydration bladders and canteens
Operational Flexibility
Key Features
■ The most operationally flexible mask
■ The Valve Cassette Assembly (VCA) provides the unique capability to use the 53-Series Protective Mask with a variety of PPE (Personal Protective Equipment) without the need to remove or change any components.
■■ APR (Air Purify Respirator)- A negative pressure mask using NATO thread filters
■■ SCBA (Self Contained Breathing Apparatus)
■■ PAPR (Powered Air Purifying Respirator)
■■ CCBA (Closed Circuit Breathing Apparatus)
■ Combination SCBA and PAPR Apparatus
The 53-Series mask is operational in the following modes:
but also provides a better seal
ballistic protection as well as
Operator Protection and Comfort
M53+ParticulateParticulate and CS/CN
M53+General Purpose NBC filter configuration
ONE MASK, ALL MISSIONS.
The M53 respirator falls within the definition of Significant Military Equipment in the United States Munitions List, International Traffic in Arms Regulations and may only be supplied outside of the United States of America to customers who are licensed by the US Department of State, Directorate of Defense Trade Controls.
M53 Mask Specifications
CBRN Agent Resistance
Mustard (H)
Greater than 24 HoursSarin (GB)
Soman (GD)
VX
Laboratory Protection Factor performance (Sodium chloride) Greater than 10,000
Breathing Performance (excluding filter)
Re-breathing CO2 0.8%
Inhalation Resistance at:
85 l/Min 15 mm WG
160 l/min 32 mm WG
Exhalation resistance negative pressure mode:
85 l/min 15 mm WG
160 l/min 30 mm WG
Exhalation resistance positive pressure mode: 40 mm WG
Weight
M53 mask (excluding filter) 1.6 lbs.
Field of view
Visual field Score - NIOSH CBRN standard 96
Materials used
M53 Mask Visor Flexible polyurethane
M53 Mask Facepiece Chlorobutyl/Silicone Rubber
Hydration
Drinking Flow Rate >230 ml/min
Weight
www.avon-protection.com1 888 AVON 440
MADE IN AMERICA
GR0
0326
-08a
ONE MASK, ALL MISSIONS.
PROTECTING TODAY’S WARFIGHTERWITH TOMORROW’S TECHNOLOGY.
AIR
PU
RIF
YIN
G R
ES
PIR
ATO
R
UNIQUE VISOR TECHNOLOGY
■ Unique polyurethane visor is highly flexible plus scratch and impact resistant
■ Optically correct across the whole field of view
■ Panoramic visor design gives excellent field of vision and wearer recognition while enhancing compatibility with weapon sights
■ The Vision Correction System allows prescription lenses to be mounted inside the mask
■ Clear outserts for extreme environments
■ Sunlight outserts for high intensity light situations
■ BlueBlocker outsert delivers sharper images by filtering out specific light wavelengths
■ Laser outserts for protection against specific wavelengths
■ Heat build up minimized ■ Low inhalation resistance ■ Low re-breathed carbon dioxide ■ Excellent de-mist properties
AIR FLOW MANAGEMENT
Avon Protection Systems, Inc. is a leader in the development and manufacture of respiratory protection products for use in Chemical, Biological, Radiological and Nuclear (CBRN) applications.
The M50/JSGPM (Joint Services General Purpose Mask) has been selected by the U.S. Department of Defense to replace existing respiratory protective masks used by several branches of the military.
The M50 provides outstanding protection from battlefield concentrations of CB agents, toxic industrial materials, toxic chemicals and particulate matter. The streamlined design offers unique twin conformal filters for low breathing resistance and reduced burden, excellent weapons integration and balanced weight distribution.
The M51 variant has been specifically designed for combat vehicle operators. Consisting of the M50 mask in conjunction with a CVC hood for head and neck protection (constructed from Gore Chempak™ barrier technology), a communication lead and hose to integrate with vehicle blowers and COLPRO systems.
■ Available in 3 sizes
■ Chlorobutyl rubber silicone blend giving the mask a high degree of flexibility and comfort for extended use
■ Unique twin low profile conformal filters
■ Unique head harness eliminates pressure points for a more comfortable fit
■ Advanced reflex seal for helmet compatibility
■ Extended chin flap for garment compatibility with JSLIST suits
■ High flow fail safe drinking device enables connection to a canteen or bladder type system
■ Second-skin hood/mask interface allows mask to integrate with the Gore Chempak™ material protective hood
■ Minimal replacement parts for simple maintenance
USER BENEFITS
■ Provides clear communication while wearing mask
■ Electronic Communication Port (ECP) allows an Audio Amplifier to be safely connected in a CBRN environment to an internal microphone.
■ Additional communication systems can be attached via this ECP using an appropriate lead. ■ Twin filter design significantly
reduces breathing resistance and improves weight distribution
■ Bayonet fit provides quick and efficient filter attachment
■ Filters can be replaced without breaking the protective seal through self sealing valves
■ Conformal filter technology improves integration with equipment
COMMUNICATIONS
FILTRATION
The M50 respirator falls within the definition of Significant Military Equipment in the United States Munitions List, International Traffic in Arms Regulations and may only be supplied outside of the United States of America to customers who are licensed by the US Department of State, Directorate of Defense Trade Controls.
Mustard (H) / Sarin (GB) Soman (GD) / VX
Laboratory Protection Factory Performance (Sodium Chloride)
Greater than 36 Hrs
Greater than 10,000
a. Nerve Agents
Mustard
Lewisite
Any thickened form of agent
Hydrogen Cyanide
Cyanogen Chloride
Chloropicrin
c. Blood Agents
CS
CN
OC (Pepper Spray)
d. Riot Control Agents
M50 mask (including twin filters)1.9 lbs
(860 grams)
Weight
Re-breathed CO₂
Inhalation Resistance at:
30 L/Min
95 L/Min
160 L/Min
0.8%
10 mm WG
30 mm WG
64 mm WG
2 mm WG
8 mm WG
12 mm WG
Mask Only: Mask & Filters:
M50 Mask Performance
M50 Technical Data
M50 Filter PerformanceThe M50 filter canister protects the wearer against all chemical and biological agents in aerosol, liquid and vapour form including:
The M50 has been designed to be compliant with the latest US and NATO military CBRN requirements. The following data gives a good indication of its performance.
Cyclohexane
Hydrogen Cyanide (AC)
Cyanogen Chloride (CK)
Phosgene
>20 mins
>45 mins
>45 mins
>100 mins
15 mins
15 mins
15 mins
15 mins
NIOSH CBRN Cap 1 Requirement
Typical Performance
NIOSH CBRN Test Agent
Description
M50 Mask Assembly LGE
M50 Mask Assembly MED
M50 Mask Assembly SML
M50 Mask Assembly
Part Number
71050/1
71050/2
71050/3
NSN
4240-01-512-4437
4240-01-512-4434
4240-01-512-4431
CBRN Agent Resistance M50 Performance Breathing Performance
Exhalation resistance at:
85 L/Min
160 L/Min
7 mm WG
12 mm WG
Field of View
Visual Field Score – NIOSH CBRN APR Standard 96
The Americas t: +1 888 286 6440 e: [email protected] Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
“G” Series
“V” Series
Any thickened form of agent
AIR
PU
RIF
YIN
G R
ES
PIR
ATO
R
The Avon C50 protective mask is based on the U.S. M50/ JSGPM (Joint Services General Purpose Mask) and sharing key technologies, provides maximum operational flexibility to counter multiple threat scenarios, including chemical, biological, nuclear and radiological (CBRN) agents, Toxic Industrial Chemicals (TICs), and Toxic Industrial Materials (TIMs).
The C50 offers high protection, outstanding field of vision and superior comfort. The innovative design features optimize the user’s time in the operational area.
Battlefield CBRN protection
First Responders
Corrections Officers
Specialist law enforcement
Counter terrorism operations
IDEAL FOR:
UNIQUE VISOR TECHNOLOGY
The Vision Correction System allows prescription lenses to be mounted inside the mask
Clear outserts for extreme environments
Sunlight outserts for high intensity light situations
BlueBlocker outsert delivers sharper images by filtering out specific light wavelengths
Polyurethane visor is highly flexible plus scratch and impact resistant and will not yellow over time
Optically correct across the whole field of view
Panoramic visor design gives excellent field of vision and wearer recognition while enhancing compatibility with weapon sights
AIR FLOW MANAGEMENT
Heat build up minimized
Low inhalation resistance
Excellent de-mist properties
Common valves for simplicity and lower through-life cost
C50 single & twin port masks are approved for CE Marking and suitable for use in a CBRN environment when used with a suitable approved filter (Type-examination approval: PPE Regulation 2016/425/EU - Module B: Certificate CE 684841).
The C50 twin port mask is NIOSH CBRN Cap 1 approved with the CBRNF12B filter (TC-14G-0285) and NIOSH 42 CFR 84 riot control CS/CN/P100 approved with the CTF12 filter (TC-14G-0278)
�The C50 meets the latest NATO military requirements
USER BENEFITS
HYDRATION
FILTRATION
The unique chlorobutyl/silicone blend face piece material ensures the mask is not only high in protection but also provides a better seal and is more comfortable to wear for extended periods
Compatibility with helmets, CBRN protective clothing and NFPA Class 3 Suits due to the low profile, close contour brow, flat buckles and extended chin flap
Quick donning due to the pre-adjusted buckles
3 sizes providing secure and comfortable fit for all facial shapes and sizes
High flow fail safe drinking device allows connection to either a canteen or bladder type hydration system
COMMUNICATIONS
Front mounted exhale valve allows clear direct communication
For enhanced communication, an optional Voice Projection Unit (VPU) with internal microphone is easily connected via the Electronic Communication Port (ECP)
Additional external communication systems can be attached via this ECP using available leads
Filter canisters are side mounted on either left or right side minimizing interference and allowing improved capability for shoulder mounted devices
Standard STANAG round thread 40 x 1/7 mm
Allows for PAPR devices for improved protection
C50 Mask Specifications
Filter Part Number Classification Application
CSCF50 72601/71/4 Riot ControlAll particulate hazards including dust, fume, bacteria and virus, plus riot agent CS (meets 8 hour NIOSH test standards) and CN (<1 hour NIOSH test standards).
CTCF50 72606/3 Riot ControlRemoval of aerosols, particulate matter, smoke, fumes and vapours. Specifically designed for removal of tear gases including CS, CN and OC pepper spray.
MILCF50 72604/3 NATO CBRN
CBRN filter canister designed to meet the relevant criteria specified in the NIOSH CBRN APR standard at the 15-minute classification level (CAP 1). The EUROPEAN STANDARD, EN 14387 (A1B2E1K1P3), and chemical and biological warefare agents in aerosols, liquid and vapour form.
CBRNCF50 72601/2
NIOSH
Approved
CBRN CAP 1
Dual classification for industrial and CBRN applications. All particulate hazards including dust, mist, fume, bacteria and virus plus all NIOSH specified CBRN gases and vapors including nerve, blood, choking and blister agents and toxic industrial materials.
CBRNF12CE 70010/23/1CE ApprovedEN14387:04
A1 B2 E1 K1 P3
Dual classification for indstrial and CBRN applications. All particulate hazards including dust, mist, fume, bacteria and virus plus all vapours including nerve, blood, choking and blister agents and toxic industrial materials.
C50 Technical Data
CBRN Agent Resistance Requirement C50 performance
Mustard (H) / Sarin (GB) Soman (GD) / VX
36 hoursGreater than
36 hours
Laboratory protection factor performance (sodium chloride)
2,000 Greater than 10,000
Re-breathed CO2 Less than 1% 0.8%
Inhalation resistance at:
30 l/min 5 mm WG 3 mm WG
95 l/min 15 mm WG 13 mm WG
160 l/min 25 mm WG 23 mm WG
Exhalation resistance at 160 l/min
30 mm WG 15 mm WG
Mask weight N/A 490 grams
NIOSH Visual Field Score (VFS)
90 96
www.avon-protection.com
The Americas t: +1 888 286 6440 e: [email protected]
Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
GR13188-04
Avon products and associated technical information are controlled under U.S. export laws and regulations and are subject to the Export Administration Regulations (EAR) under the U.S. Department of Commerce (DOC), Bureau of Industry and Security (22 CFR 730-774). Prior authorization from the U.S. Government may be required for any export, re-export, diversion, or transfer.
Industry Certified Protection Factors NATO standard protection factors givereassurance that the mask has beenrigorously tested to optimum levels.NIOSH CBRN approved TC-14G-0318.NIOSH approved 42 CFR 84 CS/CN/P100TC-149-0278.
C50 single & twin filter port masks are CE certified for use in a CBRN environment. Type-examination approval: PPE Regulation 2016/425/EU - Module B: Certificate CE 684841.
C50 Twin Filter Port Mask
Description Part Number
C50 Mask Assembly Twinport RH LGE 70501/187
C50 Mask Assembly Twinport RH MED 70501/188
C50 Mask Assembly Twinport RH SML 70501/189
C50 Single Filter Port Mask
C50 Mask Assembly RH LGE 70501/193
C50 Mask Assembly RH MED 70501/194
C50 Mask Assembly RH SML 70501/195
C50 Mask Assembly LH LGE 70501/199
C50 Mask Assembly LH MED 70501/200
C50 Mask Assembly LH SML 70501/201
C50 Twin Filter Port Mask
C50 CE Mask Assembly Twinport LGE 70501/562
C50 CE Mask Assembly Twinport MED 70501/563
C50 CE Mask Assembly Twinport SML 70501/564
AIR
PU
RIF
YIN
G R
ES
PIR
ATO
R
The Avon FM53 protective mask was developed to operate with the wide range of respiratory protection equipment used by specialist operators in the field.
The mask, based on the U.S. M50/JSGPM (Joint Services General Purpose Mask) and sharing key technologies, provides maximum operational flexibility to counter multiple threat scenarios, including chemical, biological, nuclear and radiological (CBRN) agents, Toxic Industrial Chemicals (TICs), and Toxic Industrial Materials (TIMs).
Special Response Teams
EOD (Explosive Ordinance
Disposal) Operators
Civil Support Teams
IDEAL FOR:
KEY FEATURES
6 point skull cap head harness with low profile pre-adjusted brow straps
Fail safe, high flow hydration system
The flexible, panoramic eyelens minimizes visual stress and maximizes field of view; provides ballistic protection and scratch resistance
OPERATOR COMFORT
Available in four sizes for customized protection to accommodate all operators
Interchangeable silicone nosecups for custom fit
Comfortable reflex seal with low profile brow for helmet compatibility
Removable outserts are available to provide additional ballistic protection, comfortable operation in sunlight, and blue light filtration for sharper sighting
*Avon FM53 mask with GPCF50 filter as shown is not a NIOSH-certified configuration.
FM53 is certified to the European PPE Regulation 2016/425/EU - Module B: Certificate CE 684837.
The FM53 mask is NIOSH certified in the following configurations:
FM53 mask with CTFCF50 filter Certified under 42 CFR 84
FM53 mask with CBRNCF50 filter Certified under CBRN APR Standard Cap1
FM53 mask is a component of the ST53 SCBA system, which is certified under 42 CFR 84
SPECIALIST MASK
*FM53 mask is currently NIOSH certified in Negative Pressure mode ONLY.
**Mask shown with VPU (Voice Projection Unit).
The unique chlorobutyl/silicone blend face piece material ensures the mask is not only high in protection but also provides a better seal and is more comfortable to wear for extended periods
Flexible face piece provides superior cheek-to-stock weld for weapons integration
Reduced buckle size for suit/helmet integration
Mask integrates with NFPA Class 2 and 3 suits
Second-skin hood/mask interface allows mask to integrate with the Gore Chempak™ material protective hood
Available in single port and twin port models
MODES OF OPERATION
FM53 functions in *both negative and positive pressure modes (APR, SCBA and PAPR)
Lever located on VREU (Variable Resistance Exhalation Unit), switches mode from positive to negative pressure without removal of VPU (Voice Projection Unit) or loss of protection
Integrated voice communications capability with internal microphone for radio and voice projection unit use**
Provides clear communication while wearing mask
Electronic pass-through for external radio use
COMMUNICATIONS FILTRATION
FM53 + GPCF50 Filter
NBC response configuration
*The FM53 with GPCF50 filter is not a NIOSH certified configuration
FM53 + CTCF50 Filter Crowd control configuration
NIOSH certified configuration
FM53 + CBRNCF50 Filter CBRN response configuration
NIOSH certified configuration
www.avon-protection.com
The Americas t: +1 888 286 6440 e: [email protected]
Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
GR13190-05
Industry Certified Protection Factors NATO standard protection factors givereassurance that the mask has beenrigorously tested to optimum levels.NIOSH CBRN certified TC-14G-0319.
Type - examination approval: PPE Regulation 2016/425/EU - Module B: Certificate CE 684837.
FM53 Mask Specifications
CBRN Agent Resistance FM53 performance
Mustard (H)
Greater than 36 hours
Sarin (GB)
Soman (GD)
VX
Laboratory protection factor performance (sodium chloride)
Greater than 10,000NIOSH certified at 2000PF
Breathing Performance (excluding filter)
Re-breathed CO2 0.8%
Inhalation resistance at:
85 l/Min 15 mm WG
160 l/min 32 mm WG
Exhalation resistance negative pressure mode:
85 l/min 15 mm WG
160 l/min 30 mm WG
Exhalation resistance positive pressure mode:
40 mm WG
Weight
FM53 mask (excluding filter)
1.6 lbs.
Field of view
Visual field Score - NIOSH CBRN standard
96
Materials used
FM53 Mask Visor
Flexible polyurethane
FM53 Mask Facepiece
Chlorobutyl/Silicone Rubber
Hydration
Drinking Flow Rate
>230 ml/min
NIOSH certifications
FM53 with CTCF50 filter
NIOSH certified to 42CFR84 Approval number TC-14G-0323
FM53 with CBRNCF50 filter
NIOSH CBRN APR standard Cap 1Approval number TC-14G-0319
Avon products and associated technical information are controlled under U.S. export laws and regulations and are subject to the Export Administration Regulations (EAR) under the U.S. Department of Commerce (DOC), Bureau of Industry and Security (22 CFR 730-774). Prior authorization from the U.S. Government may be required for any export, re-export, diversion, or transfer.
Avon MP-PAPR shown in MOLLE Mount configuration
PO
WER
ED
AIR
PU
RIF
YIN
G R
ES
PIR
ATO
RMULTI - POSITION POWERED AIR PURIF YING RESPIR ATOR
MODULAR CONSTRUCTION
■ Military ■ Law Enforcement ■ Special Operations ■ Federal Security/Border Control ■ HAZMAT ■ Post-Fire Clean Up
APPLICATIONS
Avon MP-PAPR shown in MOLLE Mount Configuration
■ Optional remote power switch for simple operation at the mask
■ Addition of combination hose module for use with supplied air cylinders of varying sizes (Option)
■ Removal of Flexible PAPR Module reverts system back to Avon EZAir mode
Avon Protection introduces a new generation of CBRN Powered Air Purifying Respirator (PAPR), the Avon MP-PAPR system.
A departure from traditional rigid plastic construction systems, the Avon MP-PAPR is the world’s first flexible PAPR unit, constructed from the same field proven chlorobutyl rubber, as used for the Avon 50 series masks range.
The Avon MP-PAPR module delivers a compact and easily integrated PAPR unit providing cooling, lower user burden and reduced pulmonary stress.
The unique shape and construction allows the wearer to mount the PAPR in multiple ways, maximizing integration while delivering higher protection levels and improved well being.
Multiple product approvals allow the user to add Avon MP-PAPR to existing fielded systems such as the 50 Series APR’s, convert into a combination PAPR (Avon CS-PAPR) or revert back to an Avon EZAir configuration.
POWERED CBRN FILTRATION ■ Increased protection factors ■ Reduced breathing burden ■ Increased operational time
AVON EZAir(Hose and Battery not shown)
■ Flexible PAPR Module
Avon MP-PAPR shown in Belt Mount Configuration
INCREASED OPERATIONAL TIME INTELLIGENT CONTROL SYSTEMS
OPTIMIZED INTEGRATION NOVEL MATERIAL TECHNOLOGIES
CBRN FILTERS
■ Multiple long duration battery packs including electronic fuel gauge on Li-Ion rechargeable variant
■ Constant flow rate through filter dramatically reduces inhalation resistance and fatigue
■ Hot swap battery allows for rapid exchange even in a contaminated zone
■ Ergonomically back mounted carrier system with integrated hydration option
■ Direct MOLLE mount to ballistic vests or other protective equipment
■ Traditional belt mount fits waists up to 70”
■ S-Shape hose with crush proof technology delivers superior integration, resolving ‘snag and grab’ issues associated with traditional air supply hoses
■ FLEXIBLE PAPR MODULE: Outer flexible chlorobutyl rubber body with inner crush resistant core conforms to the wearer while providing superior impact resistance
■ UNIVERSAL HOSE: Unique one size lightweight and flexible hose. Dual wall construction with CBRN hardened outer and metal reinforced crush proof polyurethane inner
■ Automatic flow control adjusts to filter type and maximizes battery life
■ Low flow and battery alarms alert wearer to potential issues (Can be silenced for stealth operation)
■ Dual speed function – automatically reduces flow of Avon EZAir when removed from Flexible PAPR Module for single filter use
■
Power Options
Description
Replaceable Battery 2800
Li-Ion Rechargeable Battery 5200
Battery Charger
Filtration Options
Description
CBRNCF50e/i Filter
CTCF50/e Filter
Description
Remote Power Switch
The Americas t: +1 888 286 6440 e: [email protected] Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
GR1
3222
-08
MP-
PAPR
Bro
chur
e
Front Cover: MP-PAPR shown in back mount position.
Type-examination approval: PPE Regulation 2016/425/EU - Module B: Certificate CE 684847.
Unit Size 420mm L (16.5“) x 115mm H (4.5“) x 140mm W (5.5“)
Unit Weight (No battery or filter)
1.28 Kg (2.82 lbs)
Unit Weight (No Filter (6xCR123)
1.5 Kg (3.30 lbs)
Flow Rate 120 lpm controlled flow
Operational Noise @120lpm
<60 dBa
Run time
CR123, Lithium battery 4+ hours
Li-Ion Rechargeable battery 8+ hours
Operational Temperature
-32°C to 49°C -26°F to 120°F
Protection Factor PAPR
10,000 (PAPR On), 2000 (PAPR Off)
Alarms Low Battery, High Resistance, Restricted Flow (all can be silenced)
NIOSH Approved CBRN PAPR Statement of Standard and Title 42 CFR 84 TC-14G-0347 with C50TC-14G-0348 with FM54TC-14G-0349 with FM53 * MP-PAPR certified in back mount position with PAPR Back Harness only.
Construction CBRN Hardened Butyl and Noryl
Operation
Smart integrated power button on unit Remote power button on hose (optional)
Interface with APRCrush proof hose with close fit 40mm (STANAG) APR connection, one size fits all
MP-PAPR Base Kit
Avon EZAir Blower
Flexible PAPR Module
Universal Hose
Universal Hose Cover
PAPR Back Harness
Flow meter
* Many configurations available. Please contact Customer Service for further options.
TECHNICAL DATA
THE FIRST ADAPTABLE POWERED AIR SYSTEM
BREATH ASSIST APR PAPR CUR INTEGRATION
BREATH ASSIST AIR PURIFYING RESPIRATOR
POWERED AIR PURIFYING RESPIRATOR
COMBINATION UNIT RESPIRATOR INTEGRATION
Configure AvonAir protection level to meet mission requirements
50% lower price than purchasing separate systems
THE FIRST ADAPTABLE POWERED AIR SYSTEM
BREATH ASSIST APR 2000 PROTECTION FACTOR
■ The Smallest CBRN Powered Air Respirator ■ For Small Size and Lightweight Powered Air
PAPR
■ The lowest profile and most comfortable PAPR ■ For high physical exertion and long term comfort
CUR INTEGRATION
■ Enables advanced CUR integration ■ For IDLH situations
GR14069-01 AvonAir Range Brochure
10,000 PROTECTION FACTOR
100,000 PROTECTION FACTOR
Compact CBRN Blowerat the core of all three systems with:
■ Smart Flow Control Technology ■ Diagnostic Alerts and Alarms
■ Hot Swap Batteries ■ Remote On/Off Function
SE
LF
-CO
NTA
INE
D B
RE
ATH
ING
AP
PA
RA
TU
S (
SCB
A)
Avon’s state-of-the-art ST54™ Tactical Operator SCBA has been developed specifically for the tactical officer and technician applications where the operator needs to respond to ever changing operational conditions.
The ST54™ SCBA is the base to a multi-mission Respiratory Protection System which provides for operational flexibility to the operator and mission commanders in the field to tailor the PPE response based on the available intelligence. Depending on the threat or operational situation at the scene of an incident, the ST54 SCBA can be configured to provide the appropriate protection.
The ST54™ SCBA combines Avon Protection Systems’ M53A1, FM53 and FM54 respirators (see respirator datasheets for further details) with new and innovative modular breathing apparatus technology to provide positive pressure SCBA and/or PAPR capability. The ST54™ system provides the operator with total flexibility to select the necessary level of protection quickly and efficiently without degradation of operational effectiveness. Designed with the tactical mission in mind, the system incorporates non-reflective black components and warning whistle which can be silenced.
The standard ST54™ backframe two piece composite assembly with universal cylinder band to accommodate a variety of DOT approved stealth black cylinders from 4500- 5500 psi; 30, 45, 60, and 70 minute duration (70 minute only available with 5500 psi system).
Cylinder Valve The ST54™ includes a non-locking black painted brass cylinder valve.
Cylinder MonitoringThe ST54™ backframe option includes a remotely accessible, chest mounted pressure gauge for monitoring pressure and a whistle end of service alarm which has the option to be disabled if required.
Compact Demand Valve (CDV) 40mm The world’s smallest, most compact chemically hardened demand valve provides constant positive pressure.
The CDV can be mounted to either side of the respirator. It is unobtrusive and allows excellent integration with weapons and other tactical gear.
FM53|M53A1 FM54
APRPAPRSCBA
SCBA
COMMUNICATIONS
RESPIRATOR
FILTER/CANISTER OPTIONS
The Avon CS-PAPR™ is the newest generation of CBRN Powered Air Purifying Respirator (PAPR) designed for use in Combination Unit Respirators (CUR). The capability to change levels of protection dependent on the threat, now provides the wearer with increased duration on target and safer operation. Utilizing the Avon MP-PAPR module along with the patented combination hose module, the wearer can seamlessly switch between APR, PAPR and SCBA modes of protection. The single air hose connection for all modes allows the operator to retain a clear mask cheek for optimum weapon sighting.
ACCESSORIES/OPTIONS
■ Heads-up display (HUD) providing the operator with remaining air and battery life.
■ Rapid Intervention Crew (RIC) fitting located at the cylinder valve allows for emergency filling of a cylinder in operation
■ Remote quick fill located on the right waist strap allowing rapid filling by a single operator to extend mission time
■ Next generation voice projection unit (VPU)/amplifier with internal water proof microphone assembly
■ 3-pin electronic communications port (ECP) for radio interface
■ Hydration systems including traditional canteen and bladder systems
■ Vision Correction system supporting +8 to -10 diopter
■ Quick attach outserts: clear, sunlight, blue blocker, laser, mirrored and shade-5
■ Range of stowage carriers
■ Respirator options include unique conformal close fitting filter/canister design, providing the operator with greater visibility and improved weapon sighting and ergonomics
■ NIOSH approved options include the CBRNCF50 (CBRN) and CTCF50 (Riot Agent)
■ MIL-SPEC options include General Purpose (GP) filter and CS/CN filter
Modular methodology allows the operator to either add the Avon CS-PAPR to the ST54 Tactical Officer SCBA, use a stand-alone PAPR or breath assist Avon-EZAir Configurations. Optional Auto Filter Covers limit exposure of CBRN canisters to IDLH or unknown atmospheres when in SCBA mode.
The Americas t: +1 888 286 6440 e: [email protected] Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
Cylinders
Part Number
Pressure (psi) Material Free Air Capacity
NIOSH Rated Duration @ 40 lpm
Cylinder & Valve Charged Weight
Cylinder Diameter
Hydrostatic Interval
124053
4500 Full wrapped carbon, black
1274 liters 45 cu. ft. 30 min. 11.0 lbs. 5.4 in.
5 years
124054 1840 liters65 cu. ft. 45 min. 14.8 lbs. 6.3 in.
124055 2462 liters 88 cu. ft. 60 min. 19.2 lbs. 6.9 in.
124028
4500 Full wrapped carbon, natural
1274 liters 45 cu. ft. 30 min. 11.0 lbs. 5.4 in.
124029 1840 liters65 cu. ft. 45 min. 14.8 lbs. 6.3 in.
124030 2462 liters 88 cu. ft. 60 min. 19.2 lbs. 6.9 in.
602318 5500 Full wrapped carbon, black
3113 liters110 cu. ft 70 min. 20.4 lbs. 7.1in.
Certifications
The Avon ST54 carries a NIOSH Industrial Approval under the provisions of 42 CFR 84 TC-13F in a variety of cylinders and facepiece size combinations.
Approval Number Description
TC-13F-0955 30 MIN 4500 PSIG
TC-13F-0956 45 MIN 4500 PSIG
TC-13F-0957 60 MIN 4500 PSIG
TC-13F-0958 70 MIN 5500 PSIG
Breathing Performance SCBA Mode Breathing Performance PAPR Mode
Breathing rate 103 lpm Breathing Rate 120-130 lpm
Environmental rage -30º to +60º C
End of cylinder air Able to sustain positive pressure down to 10 Bar (145 psi) cylinder pressure
Breathing Performance in APR Mode
Breathing resistance Exhalation breathing resistance of no greater than 20mm of water at 85 lpm in a negative pressure mode
Inhalation resistance including canister 50mm of water at 85 lpm
Live Agent Performance
Challenge chemical
Requirements Actual
Test agent NIOSH CBRN requirements
Typical perfor-mance
Max Peak (mg/m3)
Max Cumulative (mg-min/m3)
Max Peak (mg/m3)
Max Cumulative (mg-min/m3)
Sarin (GB) 0.600 6 0.004 0.203 Sarin (GB) 6 Hours > 6 Hours
Mustard (HD) 0.087 6 0.005 0.800 Mustard (HD) 6 Hours > 6 Hours
Material Used
53/54 Series Masks Chlorobutyl / silicone rubber and polyurethane visor
Harness on ST54 SCBA Kevlar webbing with stainless steel and nylon hardware
Backplate Glass reinforced polycarbonate
Cylinder valve Nickel-plated brass
CS-PAPR CBRN hardened butyl and PPE
TECHNICAL DATA
GR0
3833
-00
ST54
Bro
chur
e
Copyright © 2019 Avon Protection. All rights reserved.
AIR
PU
RIF
YIN
G R
ES
PIR
ATO
R
Cylinder Options
Note: These are minimum durations based on the NIOSH & CE breathing rates of 40 litres per minute.
OptionsFree air volume
DurationLitres cu.ft
4.7 litre, 300 bar / 4500 psi / carbon wrapped 1269 45 30 minutes
6.8 litre, 300 bar / 4500 psi / carbon wrapped 1836 65 45 minutes
9.0 litre, 300 bar / 4500 psi / carbon wrapped 2430 86 60 minutes
Avon’s revolutionary ST53™ multi-role Respiratory Protective Equipment (RPE) system has been developed specifically for specialist applications where the user needs to respond to changing operational conditions.
For the first time, the operational flexibility required by specialist users from their respiratory protection system is being offered in a purpose designed product. Depending on the threat or operational circumstances at the scene of an incident ST53™ can be configured to provide the required protection mode.
The ST53™ combines Avon Protection Systems’ FM53™ mask (see FM53 datasheet for further details) with new and innovative modular breathing apparatus technology to provide positive pressure SCBA and/or PAPR capability. The ST53™ system provides the operator with total flexibility to select the necessary level of protection quickly and efficiently whilst continuing to operate effectively. Designed with stealth applications in mind, the system incorporates non-reflective black components and a warning whistle which can be silenced.
OPTION
C
Cylinder Valve
The ST53™ includes a nickel-plated brass cylinder valve with the option of locking and non-locking configurations.
Cylinder Content Monitoring
The ST53™ backframe option includes a remotely accessible, chest mounted pressure gauge for monitoring of pressure and a whistle for end of service alarm which has the option to be disabled if required.
Compact Demand Valve (CDV)
The world’s smallest, most compact chemically hardened demand valve provides constant positive pressure.
With the option to mount on either side of the mask, it is unobtrusive and allows excellent integration with weapons and other personal equipment.
The CDV is attached to the mask via the standard 40mm thread connection.
The standard ST53™ with full back frame offers 4.7 litre, 6.8 litre and 9 litre lightweight carbon cylinder options.
OPTION
A
The Avon CS-PAPR™ is the newest generation of CBRN Powered Air Purifying Respirator (PAPR) designed for use in Combination Unit Respirators. The capability to change levels of protection dependent on the threat, now provides the wearer with increased duration on target and safer operation.
Utilizing the Avon MP-PAPR module along with the patented combination hose module, the wearer can seamlessly switch between APR, PAPR and SCBA modes of protection. The single air hose connection for all modes allows the wearer to retain a clear mask cheeks for optimum weapon sighting.
The low profile shape of the Avon CS-PAPR delivers best in class integration
CS-PAPR
ST53
FM53
Cylinder Options
Note: These are minimum durations based on the NIOSH & CE breathing rates of 40 litres per minute.
The short duration variant provides a belt or harness carry option with 1 and 2 litre cylinder options meeting the needs of law enforcement and special forces for short-term tactical operations.
ACCESSORIES
OPTION
B
The FM53™ system includes a unique close fitting filter design, giving the user greater visibility and improved weapon sighting and ergonomics.
The Avon filter range provides protection from a wide range of CBRN hazards.
The lower inhalation resistance particulate filters can be used specifically for particulate challenges.
Filter mounted left or right side – 40mm standard NATO connection.
FILTER OPTIONS
Airline / decontamination attachments are available with the ST53™.
Optional Rapid Intervention Coupling (RIC) and airline attachment are available.
Operator replaceable spare parts available, easy to maintain with access to key components.
A wide range of fully compatible accessories such as hydration canteens, communication connections, vision correction system, clear and sunlight outserts and a range of storage and carry bags.
For enhanced voice amplification, an optional Voice Projection Unit (VPU) with internal microphone can be connected via the Electronic Communication Port (ECP).
Additional external communication systems can be attached via the ECP using an appropriate lead.
OPTIONAL EXTRAS
COMMUNICATION
Cylinder Valve
The ST53SD™ includes a nickel-plated brass cylinder valve in the non-locking configuration. Cylinder Content Monitoring
The ST53SD™ provides the option of a remote pressure gauge or a single pressure gauge attached directly to the regulator body. Compact Demand Valve (CDV)
The world’s smallest, most compact chemically hardened demand valve provides constant positive pressure.
With the option to mount on either side of the mask, it is unobtrusive and allows excellent integration with weapons and other personal equipment.
The CDV is attached to the mask via the standard 40mm thread connection.
Options Free air volume Duration
1.0 litre / 11 cu.ft carbon wrapped, 4500 psi 270 litres / 11 cu.ft 7 minutes
2.0 litre / 17 cu.ft carbon wrapped, 4500 psi 540 litres / 17 cu.ft 14 minutes
OPTION
D
with SCBA systems, benefiting the wearer with reduced weight and size compared to traditional systems.
The patented combination hose allows the user to switch modes in one simple action
Re-configurable to work as Avon EZAir or MP-PAPR
*The CS-PAPR is not NIOSH approved with an SCBA.
ST53SD
www.avon-protection.com
The Americas t: +1 888 286 6440 e: [email protected]
Europe, Middle East, Asia, Africa & Australasia t: +44 (0) 1225 896705 e: [email protected]
GR13187-05
Avon products and associated technical information are controlled under U.S. export laws and regulations and are subject to the Export Administration Regulations (EAR) under the U.S. Department of Commerce (DOC), Bureau of Industry and Security (22 CFR 730-774). Prior authorization from the U.S. Government may be required for any export, re-export, diversion, or transfer.
The Avon ST53 Carries a NIOSH Industrial Approval under the provisions of 42 CFR 84 TC-13F in a variety of cylinders and facepiece size combinations.
* The CS-PAPR with ST53 featured in this brochure is not a NIOSH approved configuration.
Type-examination approval: PPE Regulation 2016/425/EU - Module B: Certificate CE 684849.
FM53 mask
Harness on ST53 SCBA
Harness on ST53SD SCBA
Backplate
Cylinder valve
CS-PAPR
Chlorobutyl / Silicone rubber and polyurethane visor
Kevlar webbing with stainless steel and nylon hardware
Nylon cordura
Glass reinforced polycarbonate
Nickel-plated brass
CBRN Hardened butyl and noryl
Materials used
Challenge chemical
Sarin (GB)
Mustard (HD)
Test agent
Sarin (GB)
Mustard (HD)
Max Peak (mg/m3)
0.6
0.087
Requirements Typical performance
>6 Hours
>6 Hours
NIOSH CBRN requirements
6 Hours
6 Hours
Actual
Max Cumulative (mg-min/m3)
6
6
Max Peak (mg/m3)
0.004
0.005
Max Cumulative (mg-min/m3)
0.203
0.8
Live agent permeation performance
ST53 (excluding cylinder and mask)
4.7 litre, 300 bar / 4500 psi / carbon wrapped
6.8 litre, 300 bar / 4500 psi / carbon wrapped
9 litre, 300 bar / 4500 psi / carbon wrapped
3.0 kg (6.6 lbs)
3.8 kg (8.4 lbs)
4.7 kg (10.4 lbs)
5.8 kg (12.7 lbs)
Weight for ST53 units (based on empty cylinders)
ST53SD 2.0 litre / 17 cu.ft (includes 2 litre cylinder but no mask)
ST53SD 1.0 litre / 11 cu.ft (includes 1 litre cylinder but no mask)
2.4 kg (5.2 lbs)
1.8 kg (4.0 lbs)
Weight for ST53SD units (based on empty cylinders)
Unit weight (no battery or filter)
Unit weight (no filter - 6 x CR123)
1.75 kg (3.8 lbs)
1.97 kg (4.3 lbs)
Weight for CS-PAPR
FM53 mask (excluding filter)
Weight for mask only
Breathing performance in SCBA mode
Breathing rate
125 - 165 litres per minute
Breathing performance in ST-PAPR mode
Breathing rate
Environmental range
End of cylinder air
Breathing resistance
Inhalation resistance including General Purpose Filter
Exhalation breathing resistance of no greater than 20mm of water at 85 lpm in a negative pressure mode
50mm of water at 85 lpm
Breathing performance in APR mode
ST53 Technical Data
0.6 kg (1.3 lbs)
103 litres per minute with mask pressure above ambient
The operating range is -30ºC to +60ºC
Able to sustain positive pressure down to 10 bar cylinder pressure