13
2
9
17
18
19
20
13
14
15
16
10
11
12
4
6
5
21
22
23
24
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
L 11
.5
3.
9-
5
25
MGUIDE Surgical Kit Content:
3
MG-BM055Guided bone mill 5.50mm
MG-D0624Guided pilot drill 2.40 L6mm
4
1
MG-TP055Guided tissue punch 5.50mm
MG-BM047Guided bone mill 4.70mm
2
CG-D1333MGUIDE coni. con. drill: imp. 3.30 L13mm
12
CG-D0850MGUIDE coni. con. drill: imp. 5 L8mm
21
CG-D1050MGUIDE coni. con. drill: imp. 5 L10mm
22
CG-D1150MGUIDE coni. con. drill: imp. 5 L11.50mm
23
CG-D1350MGUIDE coni. con. drill: imp. 5 L13mm
24
CG-D0839MGUIDE coni. con. drill: imp. 3.90 L8mm
13
CG-D1133MGUIDE coni. con. drill: imp. 3.30 L11.50mm
11
14
CG-D1039MGUIDE coni. con. drill: imp. 3.90 L10mm
CG-D1139MGUIDE coni. con. drill: imp. 3.90 L11.50mm
15
CG-D1339MGUIDE coni. con. drill: imp. 3.90 L13mm
16
5
MG-D0824Guided pilot drill 2.40 L8mm
Guided pilot drill 2.40 L10mm
6
MG-D1024
7
MG-D1124Guided pilot drill 2.40 L11.50mm
8
MG-D1324Guided pilot drill 2.40 L13mm
10
CG-D1033MGUIDE coni. con. drill: imp. 3.30 L10mm
CG-D0833MGUIDE coni. con. drill: imp. 3.30 L8mm
9
MG-DLG55Guided Drill Length Gauge dia. 5.5mm
25
Drills Kitwall chart
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
CG-D0843MGUIDE coni. con. drill: imp. 4.30 L8mm
17
CG-D1143MGUIDE coni. con. drill: imp. 4.30 L11.50mm
19
CG-D1043MGUIDE coni. con. drill: imp. 4.30 L10mm
18
CG-D1343MGUIDE coni. con. drill: imp. 4.30 L13mm
20
7
8
Conical Connection
13
2
9
17
18
19
20
13
14
15
16
10
11
12
4
6
5
21
22
23
24
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
L 11
.5
3.
9-
5
25
MGUIDE Surgical Kit Content:
3
MG-BM055Guided bone mill 5.50mm
MG-D0624Guided pilot drill 2.40 L6mm
4
1
MG-TP055Guided tissue punch 5.50mm
MG-BM047Guided bone mill 4.70mm
2
CG-D1333MGUIDE coni. con. drill: imp. 3.30 L13mm
12
CG-D0850MGUIDE coni. con. drill: imp. 5 L8mm
21
CG-D1050MGUIDE coni. con. drill: imp. 5 L10mm
22
CG-D1150MGUIDE coni. con. drill: imp. 5 L11.50mm
23
CG-D1350MGUIDE coni. con. drill: imp. 5 L13mm
24
CG-D0839MGUIDE coni. con. drill: imp. 3.90 L8mm
13
CG-D1133MGUIDE coni. con. drill: imp. 3.30 L11.50mm
11
14
CG-D1039MGUIDE coni. con. drill: imp. 3.90 L10mm
CG-D1139MGUIDE coni. con. drill: imp. 3.90 L11.50mm
15
CG-D1339MGUIDE coni. con. drill: imp. 3.90 L13mm
16
5
MG-D0824Guided pilot drill 2.40 L8mm
Guided pilot drill 2.40 L10mm
6
MG-D1024
7
MG-D1124Guided pilot drill 2.40 L11.50mm
8
MG-D1324Guided pilot drill 2.40 L13mm
10
CG-D1033MGUIDE coni. con. drill: imp. 3.30 L10mm
CG-D0833MGUIDE coni. con. drill: imp. 3.30 L8mm
9
MG-DLG55Guided Drill Length Gauge dia. 5.5mm
25
Drills Kitwall chart
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
CG-D0843MGUIDE coni. con. drill: imp. 4.30 L8mm
17
CG-D1143MGUIDE coni. con. drill: imp. 4.30 L11.50mm
19
CG-D1043MGUIDE coni. con. drill: imp. 4.30 L10mm
18
CG-D1343MGUIDE coni. con. drill: imp. 4.30 L13mm
20
7
8
Conical Connection
13
2
9
17
18
19
20
13
14
15
16
10
11
12
4
6
5
21
22
23
24
Batch Code
Catalog Number Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
Drill's laser marks:
Side 1: drill cutting diameters
Side 2: implant length
L 11
.5
3.
9-
5
25
MGUIDE Surgical Kit Content:
3
MG-BM055Guided bone mill 5.50mm
MG-D0624Guided pilot drill 2.40 L6mm
4
1
MG-TP055Guided tissue punch 5.50mm
MG-BM047Guided bone mill 4.70mm
2
CG-D1333MGUIDE coni. con. drill: imp. 3.30 L13mm
12
CG-D0850MGUIDE coni. con. drill: imp. 5 L8mm
21
CG-D1050MGUIDE coni. con. drill: imp. 5 L10mm
22
CG-D1150MGUIDE coni. con. drill: imp. 5 L11.50mm
23
CG-D1350MGUIDE coni. con. drill: imp. 5 L13mm
24
CG-D0839MGUIDE coni. con. drill: imp. 3.90 L8mm
13
CG-D1133MGUIDE coni. con. drill: imp. 3.30 L11.50mm
11
14
CG-D1039MGUIDE coni. con. drill: imp. 3.90 L10mm
CG-D1139MGUIDE coni. con. drill: imp. 3.90 L11.50mm
15
CG-D1339MGUIDE coni. con. drill: imp. 3.90 L13mm
16
5
MG-D0824Guided pilot drill 2.40 L8mm
Guided pilot drill 2.40 L10mm
6
MG-D1024
7
MG-D1124Guided pilot drill 2.40 L11.50mm
8
MG-D1324Guided pilot drill 2.40 L13mm
10
CG-D1033MGUIDE coni. con. drill: imp. 3.30 L10mm
CG-D0833MGUIDE coni. con. drill: imp. 3.30 L8mm
9
MG-DLG55Guided Drill Length Gauge dia. 5.5mm
25
Drills Kitwall chart
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
CG-D0843MGUIDE coni. con. drill: imp. 4.30 L8mm
17
CG-D1143MGUIDE coni. con. drill: imp. 4.30 L11.50mm
19
CG-D1043MGUIDE coni. con. drill: imp. 4.30 L10mm
18
CG-D1343MGUIDE coni. con. drill: imp. 4.30 L13mm
20
7
8
Conical Connection
MP-WCG05 Rev. 1 Jan 2016
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 Quality Management
System and CE Directive for Medical Devices 93/42/
EEC. MIS products are cleared for marketing
in the USA and CE approved.
(type 3&4) (type 1&2)Soft Hard
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
3.30 mm
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
400-600
2.40 2.40
400-600
3.30
15-25
2.303.25
200-400Drilling Speed (RPM)
Diameter
Starter DrillMG-D0624
3.75/3.90 mm
Drilling Speed (RPM)
Diameter 2.40
400-600
3.75
15-25
2.303.25
200-400
2.903.85
200-400
400-600
2.40
Starter DrillMG-D0624
4.20/4.30 mm
2.40
400-600
2.303.25
200-400
4.20
15-25Drilling Speed (RPM)
Diameter 3.404.25
200-400
2.903.85
200-400
400-600
2.40
Starter DrillMG-D0624
5 mm
Drilling Speed (RPM)
Diameter
400-600
2.40 2.303.25
2.903.85
3.404.25
52.40
400-600
200-400
200-400
200-400 15-25
3.904.95
200-400
Starter DrillMG-D0624
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
BONE TYPE
MP-WCG05 Rev. 1 Jan 2016
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 Quality Management
System and CE Directive for Medical Devices 93/42/
EEC. MIS products are cleared for marketing
in the USA and CE approved.
(type 3&4) (type 1&2)Soft Hard
(type 3&4) (type 1&2)Soft Hard
BONE TYPE
3.30 mm
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
400-600
2.40 2.40
400-600
3.30
15-25
2.303.25
200-400Drilling Speed (RPM)
Diameter
Starter DrillMG-D0624
3.75/3.90 mm
Drilling Speed (RPM)
Diameter 2.40
400-600
3.75
15-25
2.303.25
200-400
2.903.85
200-400
400-600
2.40
Starter DrillMG-D0624
4.20/4.30 mm
2.40
400-600
2.303.25
200-400
4.20
15-25Drilling Speed (RPM)
Diameter 3.404.25
200-400
2.903.85
200-400
400-600
2.40
Starter DrillMG-D0624
5 mm
Drilling Speed (RPM)
Diameter
400-600
2.40 2.303.25
2.903.85
3.404.25
52.40
400-600
200-400
200-400
200-400 15-25
3.904.95
200-400
Starter DrillMG-D0624
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
The drilling sequence is demonstrated by a 11.5mm C1 implant.
Procedure recommended by MIS cannot replace the judgment and professional experience of the surgeon.
Do not use the last drill for bone type 3&4
BONE TYPE
Tools Kitwall chart
MP-WCG06 Rev. 1 Jan 2016
Batch Code
Catalog Number
Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 Quality Management
System and CE Directive for Medical Devices 93/42/EEC.
MIS products are cleared for marketing in the USA
and CE approved.
After each use, the ratchet wrench's adapter should be removed and instruments numbers 1, 4, 7, 11 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
Conical Connection
MGUIDE Tools Kit Content:
NARROW V3
MGUIDE direct ratchet insertion tool, coni. con., V3, NP
VG-GRN01
4
VG-GMN10MGUIDE motor insertion tool, coni. con., V3, NP
5
VG-GRN10MGUIDE ratchet insertion tool, coni. con., V3, NP
6
MGUIDE direct ratchet insertion tool, coni. con., WP
CG-GRW01
11
CG-GMW10MGUIDE motor insertion tool, coni. con., WP
12
CG-GRW10MGUIDE ratchet insertion tool, coni. con., WP
13
{ {
{ { {
NARROW C1
CG-GMN10MGUIDE motor insertion tool, coni. con., C1, NP
2
2 5 8 12 14
13
7
3
15
9
CG-GMS10MGUIDE motor insertion tool, coni. con., SP
8
CG-GRN01MGUIDE direct ratchet insertion tool, coni. con., C1, NP
CG-GRS01MGUIDE direct ratchet insertion tool, coni. con., SP
7
CG-GRN10MGUIDE ratchet insertion tool, coni. con., C1, NP
3
CG-GRS10MGUIDE ratchet insertion tool, coni. con., C1, SP
9
VG-GRS10MGUIDE ratchet insertion tool, coni. con., V3, SP
10
STANDARD C1/V3 WIDE C1
16
15
17
14
MG-FP020MGUIDE fixation pin, 2mm
CG-TAS55MGUIDE template anchoring screw, coni. con., SP
MT-RDL30Long hex. drive 0.05 inch
MT-RI030
18
Ratchet wrench
MG-DFP20MGUIDE drill for fixation pin, dia.2 mm
41
1
16 17
18
4 11
6 10
MGUIDE Tools Kit Content:
NARROW V3
MGUIDE direct ratchet insertion tool, coni. con., V3, NP
VG-GRN01
4
VG-GMN10MGUIDE motor insertion tool, coni. con., V3, NP
5
VG-GRN10MGUIDE ratchet insertion tool, coni. con., V3, NP
6
MGUIDE direct ratchet insertion tool, coni. con., WP
CG-GRW01
11
CG-GMW10MGUIDE motor insertion tool, coni. con., WP
12
CG-GRW10MGUIDE ratchet insertion tool, coni. con., WP
13
{ {
{ { {
NARROW C1
CG-GMN10MGUIDE motor insertion tool, coni. con., C1, NP
2
2 5 8 12 14
13
7
3
15
9
CG-GMS10MGUIDE motor insertion tool, coni. con., SP
8
CG-GRN01MGUIDE direct ratchet insertion tool, coni. con., C1, NP
CG-GRS01MGUIDE direct ratchet insertion tool, coni. con., SP
7
CG-GRN10MGUIDE ratchet insertion tool, coni. con., C1, NP
3
CG-GRS10MGUIDE ratchet insertion tool, coni. con., C1, SP
9
VG-GRS10MGUIDE ratchet insertion tool, coni. con., V3, SP
10
STANDARD C1/V3 WIDE C1
16
15
17
14
MG-FP020MGUIDE fixation pin, 2mm
CG-TAS55MGUIDE template anchoring screw, coni. con., SP
MT-RDL30Long hex. drive 0.05 inch
MT-RI030
18
Ratchet wrench
MG-DFP20MGUIDE drill for fixation pin, dia.2 mm
41
1
16 17
18
4 11
6 10
MGUIDE Tools Kit Content:
NARROW V3
MGUIDE direct ratchet insertion tool, coni. con., V3, NP
VG-GRN01
4
VG-GMN10MGUIDE motor insertion tool, coni. con., V3, NP
5
VG-GRN10MGUIDE ratchet insertion tool, coni. con., V3, NP
6
MGUIDE direct ratchet insertion tool, coni. con., WP
CG-GRW01
11
CG-GMW10MGUIDE motor insertion tool, coni. con., WP
12
CG-GRW10MGUIDE ratchet insertion tool, coni. con., WP
13
{ {
{ { {
NARROW C1
CG-GMN10MGUIDE motor insertion tool, coni. con., C1, NP
2
2 5 8 12 14
13
7
3
15
9
CG-GMS10MGUIDE motor insertion tool, coni. con., SP
8
CG-GRN01MGUIDE direct ratchet insertion tool, coni. con., C1, NP
CG-GRS01MGUIDE direct ratchet insertion tool, coni. con., SP
7
CG-GRN10MGUIDE ratchet insertion tool, coni. con., C1, NP
3
CG-GRS10MGUIDE ratchet insertion tool, coni. con., C1, SP
9
VG-GRS10MGUIDE ratchet insertion tool, coni. con., V3, SP
10
STANDARD C1/V3 WIDE C1
16
15
17
14
MG-FP020MGUIDE fixation pin, 2mm
CG-TAS55MGUIDE template anchoring screw, coni. con., SP
MT-RDL30Long hex. drive 0.05 inch
MT-RI030
18
Ratchet wrench
MG-DFP20MGUIDE drill for fixation pin, dia.2 mm
41
1
16 17
18
4 11
6 10
Tools Kitwall chart
MP-WCG06 Rev. 1 Jan 2016
Batch Code
Catalog Number
Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 Quality Management
System and CE Directive for Medical Devices 93/42/EEC.
MIS products are cleared for marketing in the USA
and CE approved.
After each use, the ratchet wrench's adapter should be removed and instruments numbers 1, 4, 7, 11 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
Conical Connection
Tools Kitwall chart
MP-WCG06 Rev. 1 Jan 2016
Batch Code
Catalog Number
Non sterile
Key to code used:
Manufacturer
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
For cleaning and sterilization instructions, please refer to the included 'Cleaning and Maintenance Instructions for Surgical Instruments'.
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park, 2015600, ISRAELWebsite: www.mis-implants.com
0483MIS Implants Technologies GmbHSimeonscarre 2, 32423 Minden, GermanyTel: +49 571-972-7620Email: [email protected]
EC REP
refers to drills only
MIS Implants Technologies Ltd. www.mis-implants.com
MIS Quality System complies with international quality standards: ISO 13485:2003 - Quality
Management System for Medical Devices, ISO 9001: 2008 Quality Management
System and CE Directive for Medical Devices 93/42/EEC.
MIS products are cleared for marketing in the USA
and CE approved.
After each use, the ratchet wrench's adapter should be removed and instruments numbers 1, 4, 7, 11 should be disassembled prior to cleaning. Reassembly prior to sterilization is required.
Conical Connection