8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
1/31
FLUE GAS DESULFURIZATION (FGD)GYPSUM PRODUCTION, PROCESSING
AND DISPOSAL
Presented ByE. Cheri Miller
Specialist, Fuel By-Products and MarketingTennessee Valley Authority
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
2/31
WHAT ARE FGD SCRUBBERS?
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
3/31
FGD PRODUCTS
Many different products from the variousFGD processes, primarily: Lime/limestone force oxidized (LSFO) =
Calcium sulfate dihydrate (gypsum) Lime/limestone unoxidized = Calcium sulfite
Fluidized bed ash and dry scrubbers =mixtures of char/fly ash and spent bed
material or sorbent containing CaO, CaSO4,CaSO3 and ash
Wet ammonia = ammonium sulfate
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
4/31
FGD PRODUCTS (cont.)
Products of Lime/Limestone Forced Oxidation processesare most often sought for agricultural use Readily dewater to 7-12% moisture even without mechanical
dewatering equipment Are easily reclaimed from ponds, stored, transported and spread
using conventional equipmentUnoxidized Lime/Limestone FGD products arethixotropic sludges (consistency of toothpastemayliquify when shaken) Difficult to dewater
Require some sort of processing or admixture such as fly ash orlime to achieve moisture levels that can be handled Cannot be easily stored, transported or spread with conventional
agricultural equipment
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
5/31
FGD Gypsum ManagementIn once-through systems, bleed stream from
the scrubber absorber tank is usually at 12-30% solids and low chloride levels. Filtratefrom gypsum dewatering is not recycled
In closed loop systems, absorber tank willconcentrate chloride levels to very high levels(20,000 ppm or more) as filtrate from gypsumdewatering is recycled back into the scrubber
cycle
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
6/31
Limestone Forced Oxidation
Process
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
7/31
FGD Gypsum Management(cont.)
Gypsum can be mechanically dewatered
using vacuum filters, rotary drum filters orcentrifugesMechanical dewatering results in a gypsum
cake product which can have moisture levels
as low as 5%Mechanical dewatering also allows for
control of particle size, chloride content andremoval of impurities
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
8/31
Vacuum Filter Belt
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
9/31
FGD Gypsum Management(cont.)
Gypsum can also be dewatered in ponds
managed as rim ditch stacksThe large size of FGD gypsum particles (average
45 microns) allows the material to readily dewaterin ponds
Gypsum ponds/stacks can dewater product to
7-12% moisture by natural gravity drainage anddrying depending on temperature and rainfall
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
10/31
Overview of LSFO Operation
Gypsum Pond with Fly Ash Silosin Foreground
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
11/31
Rim Ditch Stacking
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
12/31
Rim Ditch Stacking (cont.)
FGD Gypsum which has been
deposited in a pond or stack is easilyreclaimed for marketing using eitherconventional earth moving equipment,
orCan be reclaimed using a hydraulic
dredge and re-slurried back through the
mechanical dewatering system
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
13/31
Hydraulic Dredging from GypsumStack
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
14/31
Mining Gypsum from RimDitch Stack Using Earthmoving
Equipment
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
15/31
FGD Gypsum Handling Issues
Dewatered gypsum is usually stored in a
roofed storage shed to avoid accumulatingadditional moisture from precipitation and toprovide wind screens to prevent dusting
Reclaimed gypsum on ponds will form acrust which helps shed water and preventsdusting so long as it is undisturbed. If thecrust is broken it can cause a dusting
problem
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
16/31
Loading Trucks with GypsumInside Covered Storage Shed
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
17/31
FGD Gypsum Handling Issues
Even at moisture contents as low as
5% loading does not usually cause adust problem
Covered conveyors help prevent dustproblems at transfer points
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
18/31
Gypsum Truck Dump-CoveredConveyor
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
19/31
Loading Barge
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
20/31
Aerial View of Barge
Loadout
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
21/31
Cost/BenefitMarketing/Disposal
The O&M cost of FGD gypsum disposal in rimditch ponds is very low1 million tons/year because in reality you aremoving less than 10-20% of the material in theperimeter dikesthe rest stacks itself in the center ofthe rim ditch stack
Non-routine O&M is also lowPlacement of cover material and revegetation on side slopesRaising spillwaysDust controlGW/Surface water monitoring
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
22/31
Cost/BenefitMarketing/Disposal(cont.)
Once a utility has paid to place material in a disposalfacility, the cost of disposal is a sunk cost which cannotbe recovered
In order to avoid disposal costs, material must be
diverted beforedisposalreclaiming material afterdisposal has no cost savings benefits
In addition, even if you divert material before disposal,you will not realize any cost savings unless you moveenough material to be able to reduce manpower or
equipment at the disposal facilityWhy? Because the relationship between disposal costand tons is not a straight-line relationship
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
23/31
Avoided Cost of Disposal
Tons to Landfill
To
talCost
FixedCost
Average
Cost
ActualCost
Averagewith
FixedCost
Break Points
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
24/31
Cost/BenefitMarketing/Disposal(cont.)
Example:
Total annual O&M cost of facility = $500K
Total tons disposed = 500K/year
Nominal disposal cost = $1/ton/year
Sell 50,000 tons/year
No cost savings because your manpower and
equipment costs have not been reduced In fact, your cost/ton actually increases (e.g.
$500K/450K tons = $1.11/ton)
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
25/31
Cost/BenefitMarketing/Disposal(cont.)
In order to divert FGD gypsum prior to disposal, the material mustbe mechanically dewatered Cost of dewatering facility = $3-6 M capital Costs about $3/ton to operate dewatering facility
It is doubtful that mechanical dewatering can be justified basedsolely on an agricultural market
At sites where FGD gypsum must be mechanically dewatered sothat it can be hauled to a stacking area for disposal, the utility mayavoid a significant disposal cost by developing agricultural marketsCost of hauling to a stacking area for disposal will be very sitespecific dependent upon the distance hauled, site developmentcosts and regulatory requirements.Rule-of-Thumb for estimating trucking costs: $1/ton to load truck,$1/ton for first mile, $0.10/ton for each additional mile hauled.
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
26/31
Potential Markets for FGDGypsum
North American Production2004 =
12 M tons
Use - 2004Wallboard = 8.1 M tons
Cement = 0.74 M tons
Agriculture = 0.13 M tons
Other = 0.025 M tons
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
27/31
Potential Markets for FGDGypsum
Future North American Production
2015 = over 20 million tonsWallboard
Five new wallboard plants have been announced
which will run on FGD GypsumTotal usage in these plants will approach 3-5 M
tons/yr accounting for 12 M tons/yr
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
28/31
New Wallboard PlantsDesigned for Synthetic Gypsum
1
8
7
9
5
6
2
4
3
10 11
12**
United States Gypsum Company - February 17, 2005
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
29/31
Potential Markets for FGDGypsum
Cement
Although several newcement kilns are planned forNorth America, use in cement(as a set retardant and
grinding aid) will notsignificantly increase FGDGypsum use
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
30/31
Potential Markets for FGDGypsum
AgricultureUse of FGD Gypsum in agriculture is
the market with the greatest potentialfor expanding gypsum use
Application rates will average 1-5tons/acre
Concerns about heavy metals in
FGD Gypsum may dampenacceptance in this market
8/12/2019 Miller - FGD Gypsum Production, Processing, And Disposal
31/31
Conclusions
Total amount of FGD gypsum available for agricultural use will be ~ 7-8 million tons/year by 2015Not all FGD gypsum will be acceptable for agricultural use because ofhigh chloride content and potential perception issues associated withheavy metalsMany FGD gypsum sources will not be located in areas where the
cost/benefit of using FGD gypsum for soil amendment will justify thecost of transporting and handling the materialAgricultural use of FGD gypsum will probably be opportunistic,developing primarily in agricultural areas very close to sources ofmaterial, or at sites where the utility has disposal costs that are veryhighAt power plants where the FGD gypsum cannot be diverted prior to
disposal and/or where significant quantities cannot be marketed, theutility will not be able to justify paying subsidies to market FGDgypsumIf FGD gypsum is to be accepted as a bona fidecommodity, the cost ofutilizing the material should be borne by the end userpayment ofsubsidies for use of byproduct materials is usually viewed withsuspicion by regulators