WE ARE PROFESSIONAL SUPPLIER
OF MINERAL PROCESSING & EQUIPMENT
Alsancakli Makine Enerji Ve Gida ithalat ihracat Sanayi Ticaret ltd.sti
Turkiye Merkez : 1421 Sk. No:63 K:1 D:2 Mimar Sinan Mh.
Alsancak Izmir Turkiye Tel:+90 2324224596, Fax : Tel:+90 232422
2
GENERAL BUSINESS SCOPE OF AMEG
Alsancakli Makine Enerji Ve Gida ithalat ihracat Sanayi Ticaret ltd.sti
Turkiye Merkez : 1421 Sk. No:63 K:1 D:2 Mimar Sinan Mh.
Alsancak Izmir Turkiye Tel:+90 2324224596, Fax : Tel:+90 232422
Engineering Textile Energy Trade Autoparts Food
AMEG
3
WE ARE PROFESSIONAL SUPPLIER
OF MINERAL PROCESSING & EQUIPMENT
EQUIPMENT LIST
CRUSHING EQUIPMENT PEF Jaw crusher
PEX Jaw crusher
Impact crusher
PC Hammer Crusher
PCZ Single stage heavy hammer crusher
PXJ fine crusher
DPC single-stage series fine crushers
Double roll crusher
PCH Ring hammer crusher
PCK Reversible Hammer Crusher
Vertical composite crusher
Cone crusher
GRINDING EQUIPMENT
Ball mill
Energy Saving Ball mill
High Efficiency Energy Saving Ball mill
Rod Mill
FEEDING & SCREENING EQUIPMENT
Vibrating feeder
Jig feeder
Trough feeder
Electromagnetic vibrating feeder
Vibrating Screen
Linear Vibrating Screen
Drum Screen
Belt Conveyor Application
Bucket elevator
Sand Washer
Spiral sand washer
Spiral chute
4
CRUSHING EQUIPMENT
PEF Jaw crusher
Jaw crusher
It is one of the most popular equipments in mining
industry production. It is widely used in all kinds of
materials with primary crushing or secondary crushing,
with the crush resistance below 320 MPa. It has the
features of high crushing ratio, simple structure, stable
operation, easy maintenance and low operation cost.
Jaw Crusher Working principle
The structure of jaw crusher contains the frame, eccentric shaft, big belt pulley, flywheel, movable
jaw, side guard plate, toggle plate, rear seat of toggle plate, modulation gap screw, returning
spring, fixed jaw plate and movable jaw plate, etc, among which the toggle plate is used for safety.
The working mode of this series jaw crusher is pressing deviously.
This crushing machine working theory is: The motor drives belt and belt wheel, the eccentric shaft
causes the movable jaw to move down and up, forward and backward, the angle between toggle
plate and movable jaw becomes bigger when the movable jaw moves up, so that the movable jaw
moves toward the fixed jaw, and the materials are pressed, crushed, or cut, as a result, the aim of
crushing is accomplished.
The angle between toggle plate and movable jaw becomes smaller when the movable jaw moves
down, the movable jaw leaves the fixed jaw because of the function of drag link and spring, here
the crushed materials are discharged from the bottom hole of crushing chamber. Along with the
continuous turning of motor, the movable jaw of crusher moves periodically to crush and discharge
materials, so that the mass production is obtained.
Model
Max feed
size
(mm)
Discharge
size
(mm)
Capacity
(T/H)
Power
(KW)
Main shaft
Rotation speed
(r/min)
Equip.
Weight
(T)
PEF150X250 125 10-40 1-3 7.5 285 0.7
PEF200X300 180 20-70 2-8 11 285 0.8
PEF-250X400. 210 20-80 4-14 15 310 2.8
PEF-400X600 350 40-160 20-120 30 300 6.5
PEF500X750 425 50-100 40-110 55 275 11.3
PEF-600X900 480 72-200 56-192 75 255 17.6
PEF750X 1060 630 80-200 100-250 90 250 29
PEF900X 1200 750 95-200 120-280 110 250 50
PEF1000X 1200 850 110-260 180-340 130 200 53
PEF1200X 1500 1020 150-300 300-500 160 180 101
5
CRUSHING EQUIPMENT
PEX Jaw crusher
Jaw crusher
It is one of the most popular equipments in mining
industry production. It is widely used in all kinds of
materials with primary crushing or secondary crushing,
with the crush resistance below 320 MPa. It has the
features of high crushing ratio, simple structure, stable
operation, easy maintenance and low operation cost.
Jaw Crusher Working principle
The structure of jaw crusher contains the frame, eccentric shaft, big belt pulley, flywheel, movable
jaw, side guard plate, toggle plate, rear seat of toggle plate, modulation gap screw, returning
spring, fixed jaw plate and movable jaw plate, etc, among which the toggle plate is used for safety.
The working mode of this series jaw crusher is pressing deviously.
This crushing machine working theory is: The motor drives belt and belt wheel, the eccentric shaft
causes the movable jaw to move down and up, forward and backward, the angle between toggle
plate and movable jaw becomes bigger when the movable jaw moves up, so that the movable jaw
moves toward the fixed jaw, and the materials are pressed, crushed, or cut, as a result, the aim of
crushing is accomplished.
The angle between toggle plate and movable jaw becomes smaller when the movable jaw moves
down, the movable jaw leaves the fixed jaw because of the function of drag link and spring, here
the crushed materials are discharged from the bottom hole of crushing chamber. Along with the
continuous turning of motor, the movable jaw of crusher moves periodically to crush and discharge
materials, so that the mass production is obtained.
PEX jaw crusher technical parameters
Model Max feed size
(mm)
Discharge
size(mm)
Capacity
(T/H)
Power
(KW)
Weight
(T)
PEX150x750 120 8-25 10-40 15 3.5
PEX250x750 210 12-25 15-50 30 5.5
PEX250x1000 210 12-50 30-95 37 6.4
PEX250x1200 210 12-65 40-100 37 8.8
PEX350x750 300 15-50 20-50 30 6.5
PEX300xI300 250 20-90 45-130 75
6
CRUSHING EQUIPMENT
Impact crusher
Impact crusher
Impact crusher is acknowledged in this field for a long
time and gives smooth running resulting power
economy and higher efficiency. Jinma brand Impact
Crusher is mainly used to crush many kinds of large,
medium, small materials such as rock or stone whose
side length is less than 500mm, and compression
resistance less than 250Mpa. The impact crusher is
widely used in hydroelectricity, highway, artificial rock,
stone and sand, building material, etc
Impact Crusher Working Principle
When the impact crusher works, the motor drives the rotor rotate with high speed, on the rotor
where installed the hammers. When the materials get into the area which the hammers affect,
under the impact function of the hammer at a high speed, the materials are thrown to the impact
device above the rotor continuously. And then the materials are rebounded from the impact liner to
the area where the hammers effects for being recrushed. The materials from large to small all to
be crushed at the impact chamber repeatedly. The process won’t stop till the material are crushed
to the required size and then discharged from outlet
Impact crusher Specification
Model Rotor size(mm) Feed opening Max.feed
size(mm)
Capacity(
T/H)
Power
(KW)
Weight
(Ton) Diameter L W L
PF-0607 Φ644 740 320 730 100 5-15 30 4
PF-0807 Φ850 700 400 730 200 10-25 45 8
PF-1007 Φ1000 700 400 730 250 25-45 37-55 9.2
PF-1008 Φ1000 800 400 830 260 30-50 55-75 10.5
PF-1010 Φ1000 1050 400 1080 300 50-80 75-90 14
PF-1210 Φ1250 1050 400 1080 300 70-120 110-132 17
PF-1214 Φ1250 1400 400 1430 300 130-180 132-180 21
PF-1315 Φ1320 1500 860 1520 450 160-250 180-250 25
PF-1320 Φ1320 2000 860 2030 500 160-300 300-375 30
7
CRUSHING EQUIPMENT
PC Hammer Crusher
PC Hammer Crusher
The hammer crusher crushes through the collisions
between high-speed hammer and materials, and the
hammer crusher has good quality features like simple
structure, high reduction ration, high efficiency, etc. The PC
hammer crusher(hammer mill) are suitable for both dry and
wet brittle, medium-hard materials of the mining, cement,
coal, metallurgic, construction material, road building,
petroleum & chemical industries, etc.
PC Hammer Crusher Specification
Model Feed size
(mm)
Discharge size
(mm)
Capacity
(T/H)
Power
(KW)
Equipment Weight
(T)
PC400X300 ≤100 ≤10 5-10 11 0.8
PC600X400 ≤120 ≤15 10-25 18.5 1.5
PC800X600 ≤120 ≤15 20-35 55 3.1
PC1000X800 ≤200 ≤15 20-40 90 7.9
PC1000X1000 ≤200 ≤15 30-70 132 8.7
PC1250X1250 ≤250 ≤25 50-100 185 10.5
PC1300X1200 ≤250 ≤29 60-150 240 13.6
PC1400X1400 ≤280 ≤30 120-170 280 16.2
PC1600X1600 ≤350 ≤30 200-280 450 19.6
8
CRUSHING EQUIPMENT
PCZ Single stage heavy hammer crusher
PCZ Single stage heavy hammer crusher
This crusher is suitable for crushing limestone,
silica, dolomite, wind fossils, coal gangue, coal,
coke, shale, gypsum, etc. The PCZ single stage
heavy hammer crusher with large feed size, small
discharge size, integrate two stages crushing into
single stage. It can crush materials from
300mm-1200mm directly to 0-60mm, replaces
the jaw crusher and impact crusher, reduces
operation cost.
PCZ single-stage heavy hammer crusher Specification
Model Rotor D*L
(mm)
Feed size
(mm)
Discharge size
(mm)
Capacity
(T/h)
Power
(KW)
Weight
(T)
0806 800x600 ≤300-400 0-40 60 55 3.8
0808 800400 ≤400-500 0-50 80-100 75 6.5
1008 1000400 ≤500-650 0-60 100-120 90 8
1010 1000x1000 ≤600-750 0-70 120-150 132 11.5
1210 1200x1000 ≤650-800 0-70 150-200 185 14
1510 1500x950 ≤800 0-80 160-250 200 17.5
1512 1500x1160 ≤800 0-80 250-300 250 19
1600 1600X1500 ≤800 0-80 280-350 280 28
1615 1650x1450 ≤900 0-80 300-380 280 28
2015 2000x1500 ≤1200 0-80 400-500 400 32
9
CRUSHING EQUIPMENT
PXJ fine crusher
PXJ fine crusher, sand maker characteristics:
Small discharge size, even particles, large capacity, long
lifetime of the hammers, little power involved; change
two stage crushing into single stage, simplified flow chart,
simple structure, easy maintenance, stable running, etc.
It is very suitable for limestone, coal, gypsum, new
building materials, etc
The investment is 35%-50% lower than the same size of
the traditional technique and equipments; (take
limestone as an example: the crushed product size less
than 5mm account for 85%). Long-run maintenance
costs would be 35%-50% lower than the traditional
technique and equipments. It is widely used in industry (limestone, river gravel, cobblestone,
weathered rock, quartz, etc.), cement, refractory and metallurgical industries.
PXJ fine crusher technical parameters
Rotor D*W
(mm)
Input opening
(mm)
Max feed
size(mm)
Discharge
size(mm)
Capacity(TPH) Power
(kw) Cement Clinker limestone
Φ800X 400 400X 185 120 0-5 20-30 35-45 37-45
Φ800X600 500X250 180 0-5 35-40 45-55 45-55
Φ800X800 550X330 180 0-5 35-45 55-65 45-55
Φ1000X 1000 1000X350 180 0-5 45-55 65-75 55-75
Φ1200X 1000 1200X400 180 0-5 55-80 75-100 100-110
Φ1200X1200 1200X450 180 0-5 75--90 90-100 100-132
Φ1400X 1400 1500X 500 190 0-5 90-430 100-150 160
Φ1600X1600 1600X550 190 0-5 170-210 190-250 250
Φ1800X1800 1800X800 190 0-5 250-270 280-310 315
10
CRUSHING EQUIPMENT
DPC single-stage series fine crushers
DPC single-stage series fine crushers are widely used
for crushing basic industrial raw materials like limestone,
gypsum, coal, duns, coke, land waste, shale, etc. It has
many advantages such as large feed size, small
discharging size, long time life of hammers, large capacity,
easy maintenance, low operation cost, etc.
Large materials are fed into the crushing chamber, and are
stockpiled on the special middle carrier in the machine, the
hammer runs between the space of the carrier and
smashes the big pieces of materials continually; the falling
small pieces of materials are smashed by high rotating
speed hammers, the fine crushed materials enter into
grating grid, and finally come out from the discharge
opening.
DPC single-stage series fine crusher s Technical parameters
Model Feed size
(mm)
Discharge size
(mm)
Capacity
(T/H)
Power
(KW)
Weight
(T)
DPC-15 500 ≤5mm 80% 15-35 22-45 11
DPC-35 700 ≤5mm 80% 35-60 55-75 16
DPC-65 <800 ≤5mm 80% 60-90 90--132 19
DPC-90 900 ≤5mm 80% 90-125 132-200 23
DPC-125 ≤1100 ≤6mm80% 125-180 200-280 28
DPC-180 ≤1100 ≤6mm80% 180-250 280-380 33
DPC-250 ≤1300 ≤6mm80% 250-400 450--630 43
DPC-300 ≤1300 ≤6mm80% 450-650 630-800 55
11
CRUSHING EQUIPMENT
Double roll crusher
Double roll crusher are widely used to
crush brittle and flexible stuff in cement,
metallurgy, chemical, coal, hydroelectric,
etc
Double roll crusher Specification
Model 2PG-400X250 2PG-610X400
Roller Dia. (rum) 400 610
Roller length (mm) 250 400
Max. feeding size(mm) 25 85
Discharging size (mm) 0-8 0-30
Output (T/H) 5-10 12-40
Power (KW) 11 30
Overall dimension(L*W*H) 1430*1481*816 2235*1722*810
Weight (Ton) 1.3 3.5
12
CRUSHING EQUIPMENT
PCH Ring hammer crusher
PCH Ring hammer crusher
It is a new technology, and widely used in mining,
cement, coal, metallurgy, highway, fuel and other
industries. The particle size can be changed by
adjusting the screen meshes according different
users' requirements.
PCH Ring hammer crusher Working principle
the main working part of this is the rotor with a hammer(or hammer head), which consists of
spindle, hammer and other parts. The motor drives the rotor spinning with high-speed in the cavity,
and the materials needed to crush are conveyed into the cavity from the inlet, and being crushed
by high-speed movement of the hammer blowing and impact, squeezing, and grinding among the
materials. There is a screen plate at the bottom of the rotor, which can screen the crushed
materials: materials size smaller than the sieve can come out through the sieve, while the
materials with bigger size than than the sieve will still be shot and grinded bu the hammer, and
finally be discharged out from the plate
PCH Ring hammer crusher Specification
Model Max feed size
(mm)
Discharge
size
(mm)
Capacity
(t/h)
Rotation speed
(r/min)
Power
(KW)
Weight
(T)
dimension
(mm)
PCH0402 ≤200 ≤30 8-12 960 5.5 0.8 810*890*560
PCH0404 ≤200 ≤30 16-25 970 11 1.05 980*890*570
PCH0604 ≤200 ≤30 22-33 970 15 1.43 1050*1270*800
PCH0606 ≤200 ≤30 30-60 980 30 1.77 1350*1270*1080
PCH0808 ≤200 ≤30 70-105 740 45 3.6 1750*1620x1080
PCH1010 ≤300 ≤30 160-200 740 90 6.1 2100*2000*1340
PCH1016 ≤300 ≤30 300-350 740 155 9.2 2700*2000*1350
PCH1216 ≤350 ≤30 620-800 740 355 15.0 4965*2500*1600
PCH1322 ≤400 ≤30 800 595 400 24.9 6333*3295*2505
13
CRUSHING EQUIPMENT
PCK Reversible Hammer Crusher
PCK Reversible Hammer Crusher is used for
crushing brittle materials with medium hardness,
such as: coal, coal gangue, dolomite, limestone,
gypsum, wind fossils, shale, bentonite, soft
refractory etc; also specially adapt coal of fine
crushing work before large coal-fired power
plants, refractory plant, pottery factory,
aluminium, steel company before furnace of and
also suitable for artificially mechanism fine
crushing sand work to limestone, dolomite
whose compressive strength is below 200 Mpa
(Mpa) of raw material.
PCK Reversible Hammer Crusher Specification
Model Unit PCK--0808 PCK--1010 PCK-4212 PCK--1413 PCK--1416
Rotor Diameter mm 800 1000 1250 1430 1410
Rotor Length mm 800 1000 1250 1300 1608
Rotor Speed r/min 960 900 900 885 885
Input Size mm ≤70 ≤80 ≤80 ≤100 ≤100
Discharge Size mm ≤3 ≤3 ≤3 ≤3 ≤3
Work Capacity t/h 35-65 100-150 150-200 200-260 400-600
Motor Power kw 75 220 280 300 380
Weight kg 4800 11460 16060 20060 21860
Dimension
mm
(L)1600 (L)3800 (L)4600 (L)4753 (L)6443
(W)1400 (W)2400 (W)2700 (W)3180 (W)3380
(I-[)1800 (H)1800 (H)2100 (14)2278 (H)2870
14
CRUSHING EQUIPMENT
Vertical composite crusher
Vertical composite crusher
it is mainly used for medium and small cement clinker
or raw materials (broken for cement limestone) in
combination with domestic and international pre
crushing technology, developed by the main
structure parameter optimization rotogravure as an
ideal secondary crushing equipment for technical
transformation or new production line. This series
crusher is suitable for crushing iron ore, aluminum
ore, sandstone, gypsum, blast furnace slag, coal
gangue phosphate rock and coal etc medium harden
ore and also can be used in building materials,
mining and metallurgy, coal and chemical industries.
.
Vertical Composite Crusher Specification
Model
Inner
Dia
(mm)
Capacity
(t/h)
Feeding
Size(mm)
Discharge
Size(mm)
Shaft
Speed
(r/min)
Motor Dimension Weight
(t) Model Power
(kw)
(LXWXH)
(mm)
PCL750 750 12-15 80 0-5 720 Y200L-4 30 2000*1100*1375 3.1
PCLI000 1000 25-30 90 0-6 500 Y280M-6 55 2690*1500*1600 4.6
PCL1250 1250 35-40 100 0-7 420 Y315M1-8 75 3270*1600*1900 6
PCL1500 1500 55-70 120 0-8 400 Y315M3-8 110 3400*2000*2300 9.5
PCL1750 1750 80-100 <150 0-9 380 Y315M3-8 160 3710*2360*2390 15
PCL2000 2000 110-130 180 0-10 370 Y315M3-8 185 4100*2660*2620 20
15
CRUSHING EQUIPMENT
Cone crusher
Cone Crusher
Introduction
This series crusher is suitable for crushing medium above
hardness of various ore and rock. It has characters such as
simple structure, high efficiency, simple to adjust, economic
use.
Characteristics: Crushing cavity types is based on minerals.
Standard (PYB) is suitable for crushing, Medium (PYZ)
applying to middle crushing, short head type (PYD) applying
to fine crushing
Cone crusher Specification
Model Cone
Diameter(mm)
Max Feed
Size(mm)
Adjustable
Range(mm)
Capacity
(t/h)
Power
(KW)
Weight
(T)
Dimension
(L*W*H) (mm)
PYB-900 900 115 15-50 50-110 55 10.8 2692*1640 * 2350
PYZ-900 900 60 5-20 20-65 55 10.8 2692*1640*2350
PYD-900 900 40 3-13 15-50 55 10.9 2692*1640*2350
PYB-1200 1200 145 20-50 110-200 110 25 2790*1878*2844
PYZ-1200 1200 100 8-26 50-150 110 25 2790*1878*2844
PYD-1200 1200 50 3-15 18-105 110 25.7 2790*1878*2844
PYB-1750 1750 215 25-60 280-510 155-160 50.3 3910*2894*3809
PYZ-1750 1750 185 10-30 115-320 155-160 50.3 3910*2894*3809
PYD-1750 1750 85 5-15 75-230 155-160 50.5 3910*289*3809
16
GRINDING EQUIPMENT
Ball mill
Ball mill Structure:
Ball mill is composed of feeding part, discharging part, turning part and driving part (reducer, small
driving gear, electric motor and electric control). The quill shaft adopts cast steel part and the liner
is detachable. The turning gearwheel adopts casting hobbing process and the drum is equipped
with wear-resistant liner, which has good wear-resistance. The machine is with stable and reliable
working condition. Moreover, according to different materials and discharging methods, there are
dry ball mills and wet ball mills for choice.
Ball mill Working Principle:
The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are
transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and
ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused
by rotation of barrel brings the steel balls to a certain height and impact and grind the materials.
The ground materials are discharged through the discharging board thus the grinding process is
finished.
17
GRINDING EQUIPMENT
MQG Ball mill
Ball mill is the key equipment for grinding
after the crushing process, which is widely
used in the manufacture industries, such
as cement, silicate, new building material,
refractory material, fertilizer, ferrous metal,
nonferrous metal and glass ceramics, etc.
It can be used for the dry and wet grinding
for all kinds of ores and other grind-able
materials
MQG Ball Mill Specification
Model
Rotation
speed
(r/min)
Grinding
media loading
(t)
Feed
size
(mm)
Discharge
size(mm)
Capacity
(t/h)
Power
(KW)
Weight
(T)
Φ900*1800 38 1.5 20 0.075-0.89 0.65-2 18.5 3.6
Φ900*3000 38 2.51 20 0.075-0.89 1.1-3.5 22 4.6
Φ1200*2400 32 3.8 < 25 0.075-0.6 1.5-4.8 30-45 12.5
Φ1200*3000 32 5 25 0.074-0.4 1.6-5 30-45 12.8
Φ1200*4500 32 7 25 0.074-0.4 1.6-5.5 55 13.8
Φ1500*3000 27 8 25 0.074-0.4 2-5.8 75-90 17
Φ1500*4500 27 14 25 0.074-0.4 3-6.5 90-110 21
Φ1500*5700 27 15 25 0.074-0.4 3.5-8 110-132 24.7
Φ1830*3000 24 11 25 0.074-0.4 4-10 132-180 28
Φ1830*6400 24 23 25 0.074-0.4 6.5-15 210 34
Φ1830*7000 24 25 25 0.074-0.4 7.5-17 210-245 36
Φ2200*5500 21 30 25 0.074-0.4 10-22 370 48
Φ2200*6500 21 31 25 0.074-0.4 14-26 380 50
Φ2200*7500 21 33 <25 0.074-0.4 15-29 475 56
Φ2400*7000 21 39 25 0.074-0.4 16-33 475 69
Φ2400*l1000 21 51.5 <25 0.04-0.08 16-35 630 99
Φ2700*3600 21 39 25 0.074-0.4 16-29 475 74
Φ2700*4500 21 43.5 25 0.074-0.4 20-35 500 80
Φ3200*4500 18 65 25 0.074-0.4 25-40 800 137
Φ2400*13000 21 65 ≤25 0.045-0.18 20-23 800-1180 116
Φ2600*13000 19.61 75 ≤25 0.045-0.18 20-32 800-1180 149
Φ3000*11000 18.08 95 ≤25 0.045-0.18 25-35 1250-1430 148
Φ3200*13000 17.8 128 ≤25 0.045-0.18 30-46 1430-1600 218
18
GRINDING EQUIPMENT
GZMY Energy Saving Ball mill
GZMY Energy Saving Ball Mill specification
Model Rotation
Speed
(r/min)
Grinding media
loading (t)
Feed size
(mm)
Discharge
size (mm)
Capacity
(t/h)
Power
(kw)
Weight
(t)
Φ900*2100 38 1.5 ≤15 0.075-0.89 0.5-2 15 3.9
Φ900*2400 38 1.8 ≤15 0.075-0.89 0.7-2.8 18.5 4.5
Φ900*3000 38 2.51 ≤15 0.075-0.89 0.8-3.5 22 5.0
Φ1200*2400 32 3.8 ≤20 0.074-0.4 0.9-4.8 30 9.2
Φ1200*2800 32 4.0 ≤20 0.074-0.4 1.0-5.0 30 9.5
Φ1200*3000 32 4.5 ≤20 0.074-0.4 1.2-5.6 37 11.5
Φ1200*4500 30 5.5 ≤20 0.074-0.4 1.5-6.0 55 13.6
Φ1500*3000 27 7.0 ≤25 0.074-0.4 2.5-6.5 75, 15.0
Φ1500*3500 27 8.5 ≤25 0.074-0.4 3.0-8.2 75 15.6
Φ1500*4500 27 11 ≤25 0.07470.4 4-10 95 21
Φ1500*5700 27 12 ≤25 0.074-0.4 4-13 110 23.5
Φ1830*3000 24 12 ≤25 0.074-0.4 5-15 130 31
Φ1830*3600 24 13 ≤25 0.074-0.4 5-16 130 32
Φ1830*4500 24 14 ≤25 0.074-0.4 5-18 155 33.5
Φ1830*7000 24 21 ≤25 0074-04 6-20 210 36
Φ2100*3000 24 18 ≤25 0074-04 7-26 210 38
Φ2100*3600 24 21 ≤25 0.074-0.4 7-35 215 39.5
Φ2100*4500 24 26 ≤25 0.074-0.4 8-42 246 43.5
Φ2200*3000 21 28 ≤25 0.074-0.4 8-43 245 46
Φ2200*4800 21 35 ≤25 0.074-0.4 9-45 285 48
Φ2400*3000 21 23 ≤25 0.074-0.4 8-60 285 55
Φ2700*4500 21 48 ≤25 0.074-0.4 12-83 475 79
19
GRINDING EQUIPMENT
High Efficiency Energy Saving Ball mill
MQGZ super energy-saving ball mill
it was changed from edge drive to drum middle drive;
the normal ball mills’ bull gear is at one side, but the
MQGZ ball mills’ bull gears are assembled in the
middle of drum, it changes the torque of the drive,
greatly reduce the power of 40% to 50%.
MQGT super energy-saving ball mill
MQGT super energy-saving ball mill, also names
carrier roller type ball mill, it uses supporting roller,
ring gear connects speed reducer as drive, and the power can be reduced by 50% compared with bearing
type ball mill. The machine consists of feeding unit, discharging unit, roller rings, roller, gear, motor,
etc. with reasonable structure, well-made, high output, low energy consumption, and convenient operation;
it is an innovation to the old type ball mill, and a technological revolution for grinding equipments.
Specification
Model Rotation
speed(r/min)
Grind. media
loading (t)
Feed size
(mm)
Discharge
size (mm)
Capacity
(t/h)
Power
(kw)
Weight
(t)
Φ900*1800 38 1.5 ≤20 0.075-0.89 0.65-2 11 46
Φ900*3000 36 2.51 ≤20 0.075-0.89 0.8-3.5 15 5.6
Φ1200*2400 32 3 ≤25 0.075-0.6 0.9-4.8 22 12
Φ1200*3000 32 3.5 ≤25 0.074-0.4 1.2-5.6 22 12.8
Φ1200*4500 30 5 ≤25 0074-04 1.5-6 30 13.8
Φ1500*3000 27 7.5 ≤25 0.074-0.4 2.5-6.5 45 15.6
Φ1500*4500. 27 11 ≤25 0.074-0.4 4-10 55 21
Φ1500*5700 27 12 ≤25 0.074-0.4 4-13 75 24.7
Φ1830*3000 24 11 ≤25 0.074-0.4 5-15 90 28
Φ1830*4500 24 15 ≤25 0.074-0.4 5-18 90 32
Φ1830*6400 24. 21 ≤25 0.074-0.4 6.5-15 110 34
Φ1830*7000 24 23 ≤25 0.074-0.4 6-20 130 36
Φ2100*3000 24 18 ≤25 0.074-0.4 7-26 130 34
Φ2100*4500 24 24 ≤25 0.074-0.4 8-42 150 42
Φ2100*7000 24 26 ≤25 0.074-0.4 8-48 185 50
Φ2200*4500 21 27 ≤25 0.074-0.4 9-45 185 48.5
Φ2200*6500 21 35 ≤25 0.074-0.4 14-26 210 52.8
Φ2200x7000 21 35 ≤25 0.074-0,4 15-28 245 54
Φ2200x7500 21 35 ≤25 0.074-0.4 15-30 245 56
Φ2400x300
0
21 23 ≤25 0.074-0.4 8-60 185 54
Φ2400x4500 21 30 ≤25 0.074-0.4 8.5-60 185 65
Φ2700x4000 20.7 40 ≤25 0.074-0.4 12-80 285 94
20
GRINDING EQUIPMENT
HS Rod Mill
Rod mill is widely used grinding mill to grind all
kinds of ore and rocks in metal and nonmetal
mining, water conservation, building materials,
sand making industry and so on. The rod mill is
composed by the cylinder part, feeding part,
discharging part, main bearing part and driving
part, which is similar with the other mills
Rod mill Specification
Model Cylinder Dia.
(mm)
Cylinder length
(mm)
Feed size
(mm)
Discharge
Size(mm)
Capacity
(T/H)
Power
(KW)
Weight
(KG)
HS-0930 Φ900 3000 6-25 0-5 3-8 22 4500
HS-1224 Φ1200 2400 6-25 0-5 525 45 12000
HS-1245 Φ1200 4500 6-25 0-5 6-35 55 13800
HS-1530 Φ1500 3000 6-25 0-5 7-45 90 17000
HS-1545 Φ1500 4500 6-25 0-5 3.6-11 110 21500
HS-1557 Φ1500 5700 6-25 0-5 10-85 132 24700
HS-1860 Φ1800 6000 6-30 0-5 20-100 210 34000
HS-2136 Φ2100 3600 6-40 0-5 30-110 215 45000
21
FEEDING & SCREENING EQUIPMENT
ZZJ Vibrating feeder
Vibrating feeder
Vibrating Feeder features
1 .Small body, light weight, strict
structure.
2. Easy installation and maintenance,
low cost operation.
3. High efficiency, big feeding capacity.
4. Little electric expedition, high power
efficiency.
Vibrating Feeder Specification
Model Max. Input
Size(nm)
Capacity
(t/h)
Eccentric shaft
speed(r/min)
Power
(KW)
Weight
(kg)
ZZJ-3800*950 520 96-160 500-714 11 4082
ZZJ-4200*1100 590 120-240 500-800 15 4740
ZZJ-4900*960 550 120-240 500-800 15 5351
ZZJ-4900*1100 620 120-280 500-800 15 5330
ZZJ-5900*1100 650 220-350 500-800 22 6130
ZZJ-6000*1300 650 220-350 500-800 22 7500
22
FEEDING & SCREENING EQUIPMENT
Jig feeder
Jig feeder can be adjusted to
change the motor speed and
control flow, it has convenient
adjustment, flow stability, little
power consumption, it is good for
adding materials to the ball mill.
Jig feeder Technical parameters
Jig feeder Specification
Name Jig feeder Jig feeder
Model 400*400 600*600
swinging times(time/min) 47 45.8
Output opening(mm) W 400 600
H 400 600
swing stroke(mm) 0-170 0-220
Max feed size(mm) 35 50
Capacity(t/h) 0-12 3-25
Motor Model Y90S-4 Y100L-4
Power(kw) 1.1 2.2
Equipment Weight (kg) 270 560
23
FEEDING & SCREENING EQUIPMENT
CG Trough feeder
Trough feeder is mainly used to feed before crusher. It is suitable for the even feeding of granules
below 3 50mm and block shape materials.
Trough feeder Specification
Model Max input size(mm) capability(t/h) power(kw) Weight(kg)
CG500*600 200 ≤50 4 1100
CG980*1240 250 ≤90 7.5 2000
CG900*2100 300 ≤160 7.5 2450
24
FEEDING & SCREENING EQUIPMENT
Electromagnetic vibrating feeder
Series GZ electromagnetic vibrating feeder can feed bulk or
granule materials from the storage bin to the receiving
device evenly and continuously. It can realize even feeding
for crushers in sand stone production line and make rough
screening for materials. Electromagnetic vibrating feeder is
widely applied in combined operation of crushing and
screening in the industries like metallurgy, mine, mine
selection, building materials, chemicals, etc.
Electromagnetic vibrating feeder Specification
Model Capacity(tlh) Feed size(mm) Power(KW) Weight(kg)
GZ1 5 50 0.06 73
GZ2 10 50 0.15 146
GZ3 25 75 0.2 217
GZ4 50 100 0.45 412
GZ5 100 150 0.65 656
GZ6 150 200 1.5 1252
GZ7 250 250 3 1920
GZ8 400 300 4 3040
GZ9 600 350 5.5 3750
GZIO 750 500 4.0*2 6491
GZ11 1000 500 5.5*2 7680
GZ-T100(-10) 300 5.5*2 9800
25
FEEDING & SCREENING EQUIPMENT
YK Vibrating Screen
The Vibrating Screen (Vibratory Screen) is of
many layers and high efficiency. The vibratory
screen adopts the barrel type of eccentric shaft
vibration exciter and eccentric block to adjust the
swing. The screen is of the flowing
characteristics, the screening line is long and
specification of materials screened is various,
and it is also of reliable structure, strong exciting
force, high screening efficiency, low vibrating
noise, long durability, convenient maintenance, safe operation, etc, and the vibratory screen is
widely used for screening in wide range including mines, building material, transportation, energy
sources, chemical industry, etc.
Vibrating Screen Specification
Model Mesh
size
(mm)
Max feed
size(mm)
Capacity
(m3/h)
Power
(kw)
Weight
(kg)
Dimensions
(L*W*H)(mm)
2YK1225 4-50 400 8-60 5.5 2500 3040*1840*800
3YK1225 4-50 400 10-70 5.5 2850 3040*1840*1200
2YK1230 4-50 400 12-78 7.5 3000 3390*1900*800
3YK1230 4-50 400 13-80 7.5 3600 3537*1900*1200
2YK1237 4-50 400 15-86 7.5 3600 4090*1900* 800
3YK1237 4-50 400 16-90 7.5 4200 4400*1950*1200
2YK1535 5-50 400 20-125 11 4890 4552*2250*900
3YK1535 5-50 400 21-125 11 5700 4552*2250*1600
2YK1545 5-50 400 22-150 15 5330 5400*2250*1600
3YK1545 5-50 400 22-150 15 5800 5400*2250*1700
2YK1548 5-50 400 22.5-162 15 5980 5300*2200*860
3YK1548 5-50 400 22.5-162 15 6600 5752*2200*1600
2YK1848 5-80 400 25-206 15 7080 6140*2470*1380
3YK1848 5-80 400 32-276 18.5 7600 6140*2710*1780
2YK1854 5-80 400 32-312 18.5 8150 6500*2600*1300
3YK1854 5-80 400 32-312 22 8840 6960*2600*1630
2YK2160 5-100 400 50-475 30 9780 7300*2950*2000
3YK2160 5-100 400 50-475 30 10800 7300*2950*2000
2YK2460 5-100 400 65-550 37 13600 7450*3230*1500
3YK2460 5-100 400 70-620 37 15600 7450*3230*1910
26
FEEDING & SCREENING EQUIPMENT
ZDS Linear Vibrating Screen
Linear Vibrating Screen (line screen) is a new
type, efficient screening equipment, widely
used in mining, coal, metallurgy, building
materials, refractoriness, light industry,
chemical industry. Linear Vibrating Screen
(linear sieve) is stable and reliable, low
consumption, low noise, long life, steady
vibration, high efficiency screening
Linear vibrating screen Specification
Model capacity voltage
(V)
power
(kw)
Amplitude
(mm) size T/h
ZDS-0.4x1.2 ≤0.3 6 380 0.4*2 2-4
ZDS-0.5x1.2 ≤3 7 380 0.75*2 2-4
ZDS-0.6x1.2 ≤3 8 380 0.75*2 2-4
ZDS-0.7x1.5 ≤50 12 380 1.5*2 2-4
ZDS-0.8x1.6 ≤50 14 380 1.5*2 2-4
ZDS-0.9x1.8 ≤50 15 380 1.5*2 2-4
ZDS-0.9x2.4 ≤60 16 380 2.0*2 3-5
ZDS-1.2x2.4 ≤60 20 380 2.0*2 3-5
ZDS-1.2x3.0 ≤60 24 380 2.5*2 3-5
ZDS-1.5x3.0 ≤60 28 380 2.5*2 3-5
27
FEEDING & SCREENING EQUIPMENT
GTS Drum Screen
GTS drum screen is special screening
equipment produced by our company for the
power plant, coking plant, building materials,
metallurgy, chemical, mining and other
industries. It overcomes blockage on the mesh
when vibrating sieve separates relatively wet
materials to improve screening output and
reliability. It is appropriate for screening
various kinds of materials which are wet and
easier to be blocked, such as coal, coal gangue, coke raw materials, slaked lime. The maximum
size is 100mm under, screen, also available to screen less than 3mm for 10-50 mm medium size.
And this product is consistently popular by users.
Drum Screen Specification
Model
Capacity Power Screen
Diameter
Screen
Length
Discharge
Size
Input
Size
Dimension Weight
(t/h) (kw) (mm) (mm) (mm) (mm) (mm) (kg)
GTS1015 150 3.0 1000 1500 0-100 ≤300 2600*1400*1700 2200
GTS1020 100 4.0 1000 2000 0-100 ≤300 3390*1400*2140 2800
GTS1225 160 5.5 1200 2500 0-100 ≤300 4146*1600*2680 4200
GTS1530 250 7.5 1500 3000 0-100 ≤300 4460*1900*2820 5100
GTS1545 350 11 1500 4500 0-100 ≤400 5960*1900*3080 6000
GTS1848 450 15 1800 4800 0-100 ≤400 6500*2350*4000 7500
GTS2055 600 22 2000 5500 0-100 ≤400 7500*2550*4800 9600
GTS2265 800 30 2200 6500 0-100 ≤400 8500*2750*5000 12800
28
BELT CONVEYING & WASHING EQUIPMENT
Belt Conveyor Application
The belt conveyor manufactured by our company has
the advantages of big conveying capacity, simple
structure, convenient repair and standard parts, so it is
widely use in the industries of mine, metallurgy and
coal to convey loose materials and finished products.
According to different technique requirements, the
machine can convey material singly or be formed
conveying system with other conveying equipments to
meet different requirements of working line.
Belt conveyor and the Specification
Transmission length (m) Transmission
speed(m/s)
Capacity
(t/h) Belt width(mm) Power(KW)
500 12 20-30 20-30
1.3-1.6 78-191 3 4-5.5 5.5-7.5
650 12 12-20 20-30
1.3-1.6 131-323 4 5.5 7.5-11
800 ≤6 6-15 15-30
1.3-1.6 278-546 4 5.5 7.5-15
1000 10 10-20 20-40
1.3-2.0 435-853 5.5 7.5-11 11-12
1200 S10 10-20 20-40
1.3-2.0 655-1284 7.5 11 15-30
29
BELT CONVEYING & WASHING EQUIPMENT
Bucket elevator
Bucket elevator is suitable for vertical transmission of
powder, granular and small-block and less abrasive bulk
materials, which has a small requirement for the types
of materials, characteristics and block degrees; it can
raise powder, granular and bulk materials, and abrasive
materials such as grain, coal, cement, crushed ore, etc;
it also can raise high temperature products that below
250 °C with the max height of 40m.
Bucket elevator Specification
Mode
l Type
Capacity (m3/h) Hopper Drive shaft
Rotation
speed
(rpm)
Materials
max size
(mm)
Lifting
height
(m)
Deep
hopper
Shallow
hopper
Volume (L) Space
(mm)
Width
(mm)
Speed
(m/s) Deep
hopper
Shallow
hopper
D160 Rubber 8 3.1 1.1 0.65 300 160 1.0 47.5 25 4.82-30.02
D250 Rubber 21.6 11.8 3.2 2.6 400 250 1.25 47.5 35 4.48-30.08
D350 Rubber 42 25 7.8 7 500 350 1.25 47.5 45 4.3-30.3
D450 Rubber 69.6 48 15 14.5 640 450 1.25 37.5 55 4.54-34
HL300 Remark 1) 28 16 5.2 4.4 500 300 1.25 37.5 40 4.66-30.16
HL400 Remark 1) 47.2 30 10.5 10 600 400 1.25 37.5 50 4.52-30.32
PL350 Remark 2) 50 59 10.2 10.2 250 350 0.4 15.5 110 4-30
PL450 Remark 2) 85 100 22.4 22.4 320 450 0.4 11.8 150 5.12-30.08
Remark 1): Loop chain centrifugation
Remark 2) Plate China Gravity
30
BELT CONVEYING & WASHING EQUIPMENT
GX Sand Washer
Sand washer or sand washing machine used to remove dust
sand. It aims at improving the quality of sand.
Sand
washing machine Specification
Model handling
capacity(t/h)
Rotation
speed(r/min)
Power(KW) Weight(kg)
GX2000 8-40 1.2 4 1900
GX2600 20-100 1.2 5.5 2500
GX2800 50-130 1.2 7.5 3100
GX3200 240-300 1.2 11 9800
GX3600 280-500 1.2 15 14200
31
BELT CONVEYING & WASHING EQUIPMENT
FG Spiral sand washer
Spiral sand washer can wash and separate the
soil and foreign material in the sand. Its novel structure,
adjustable overflow dam baffle and reliable arrangement
can make sure the result of wash. It is widely used to wash,
classify, rid impurities, and choose the course from the fine
in the industries of highway, hydropower, construction, and
so on. It is better to wash construction and road sandstone.
Spiral sand washer Specification
Model Spiral diameter (mm) Capacity (T/h) Power (KW) Weight (T)
FG-60 600 20 3 2.55
FG-75 750 50 5.5 3.82
FG-100 1000 75 7.5 4.87
FG-120 1200 95 11 6.9
FG-150 1500 130 18.5 8.8
32
MINERAL PROCESSING EQUIPMENT
5LL Spiral chute
Spiral chute has the following features: simple structure, easily being
made, reliable operation, easy maintenance, small floor area, high
capacity. It is a high efficiency gravity concentrator of the international
advanced standard. It is the newly re-selecting equipment It is used to
separate the iron , sternums , tungsten, tantalum, niobium, gold ore ,
colliery, monazite , rutile and zircon of the size between 0.3 and 0.02mm ,
and the other metals and nonmetal minerals of enough proportion
deviation.
Spiral Chute specification
Model 5LL-1200 5LL-900 5LL-600 5LL-400
Diameter(mm) 1200 900 600 400
Spire distance(mm) 900,720,540 675,540,405 450,360,270 240,180
Landscape obliquity(') 9 9 9 9
Max spiral head qty 4 4 3 2
Feed size(mm) 0.3-0.03 0.3-0.03 0.2-0.02 0.2-0.02
Slurry density (%) 25-55 25-55 25-55 25-55
Capacity (Ton per hour) 4-6 2-3 0.8-1.2 0.15-0.2
Overall dimensions
L(mm) 1360 1060 700 460
W(mm) 1360 1060 700 460
H(mm) 5230 4000 2600 1500
Weight (KG) 600 400 150 50
33
MINERAL PROCESSING EQUIPMENT
L-S Shaking table
Application of shaking table
Concentrating Tables are designed to wet gravity-based
separation of minerals and other granular materials.
There are many applications where the concentrating table is
of particular value and cannot be equaled for economical and
efficient performance. They are effective in processing
precious and base metal, rare metal and non-metallic
minerals.
Shaking Table Specification
Model L-S
type(6-s)
Washing water capacity(t/h) 0.4-0.8
length of stroke(mm 10-30 Dimensions of table top(mm) 1.52*1825*4500
frequency of stroke per minute 240-360 Power(KW) 1.1
Horizontal Cape(°) 0-8 capacity(t/h) 0.5-1.2
feeding size(mm) 2-0.074 weight(kg) 1012
Feeding ore density(%) 15-30 Overall dimension(mm 5454*1825*1242
34
MINERAL PROCESSING EQUIPMENT
FG Spiral classifiers
Spiral classifiers are widely used in the distribution of ore
in closed circuits with ball mills, grading ore and fine slit
in gravity mills, grading granularity and flow of metal
ore-dressing, and de-sliming and dehydrating in washing.
This product features simple structure, reliable working
conditions and convenient operation. Because different
grains have different specific gravity and sedimentation
rates in liquid, this product allows the fine ore to flow in
the water, while
coarse ore sinks to the bottom. This classifier can filter materials and send coarse materials to the
feeding mouth and discharge fine materials from the pipe. The seat of the machine features
channel steel material, while the body is armor plated and the spiral axle is made of cast iron for
durability. The machine's lifting equipment can be used manually or electronically.
Spiral classifier Specification
Model Spiral
Speed
(r/min)
Output (T/day) Water
obliquity
(degree)
Motor power
Circulating Load Overflow Quantity Model Power (KW)
FG-500 8-12.5 135-210 32 14-18.5 Y90L-6 1. 1
FG-750 6-10 340-570 65 14-18.5 Y132S-6 3
FG-1000 5-8 675-1080 110 14-18.5 Y132M-6 5.5
FG-1200 5-8 1170-1870 115 14-18.5 Y160M-6 5.5
FG-1500 4-6 1830-2740 235 14-18.5 Y160M-6 7.5
FG-2000 3-5 3240-5400 400 14-18.5 Y160M-6 11
FG-2400 3.6 4650-7450 580 14-18.5 Y160M-6 15
2FG-1200 5.0-8.0 2340-3740 310 14-18.5 Y132M-6 5. 5*2
2FG-1500 4.0-6.0 3660-5480 470 14-18.5 Y160M-6 7. 5*2
2FG-2000 3.0-5.5 7780-11880 800 14-18.5 Y160M-6 11*2
2FG-2400 3.6 13600 1160 14-18.5 Y160M-6 15*2
35
MINERAL PROCESSING EQUIPMENT
GPS High-Frequency Screen
High-Frequency Screen consists of vibration exciter,
ore pulp distributor, screen frame, machine frame,
suspension springs and sieve, etc.
High-Frequency Screen Specification
Model Mesh area(M2) Input intensity (%) Capacity(t/h) Power(kw)
GPS-4 4.5 30%-40% 15-25 0.72
GPS-5 5.2 30%-40% 20-30 1. 1
GPS-6 6 30%-40% 24-36 1.5
GPS-8 8.1 30%-40% 32-48 2.2
36
MINERAL PROCESSING EQUIPMENT
CTB Magnetic Separator
Magnetic Separator has the advantages of simple
structure, large throughput, convenient operation, easy
maintenance, etc.
Magnetic Separator Application:
Magnetic separator can separate raw materials with
different magnetic rigidities. The machine works by
using magnetic force and the machine force. Magnetic
separators are designed to recover ferromagnetic
materials. The separators are available in designs and
sizes to provide solutions for all applications.
Wet magnetic separator Specification
Model Capacity(t/h) Magnetic intensity(OE) Power(kw) Weight(T)
CTB600x900 8-15 1450 1.1 0.91
CTB600x1800 15-25 1500 2.2 1.34
CTB750x1200 25-30 1550 2.8 1.49
CTB750x1800 30-45 1550 3 2.05
CTB900x1800 35-60 1550 4 3
CTB105Ox2400 55-90 1550 5.5 5
CTB1200x3000 80-150 1550 7.5 7.8
CTB1500x3000 120-200 1550 11 9.6
37
MINERAL PROCESSING EQUIPMENT
XB Mixer
Mixer
In the mineral product agitation barrel, the slurry will be well mixed with
the medicament to create conditions for mining operations. Application:
Mixing Barrel is used for mixing pulp before the floatation process,
makes the pulp and medicament mixed intensively, and creates
condition for the ore beneficiation working.
Mixer Specification
Model
Inside
Diameter
(mm)
Inside
height
(mm)
Volume
(m3)
impeller
diameter
(mm)
Rotation
speed
(r/min)
Dimension (mm) Power
(kw)
Weight
(kg) L W H
XB-1000 1000 1000 0.7 250 530 1240 1130 1501 1.5 470
XB-1500 1500 1500 2.6 400 340 1846 1738 2265 3 1000
XB-2000 2000 2000 5.6 550 290 2421 2166 2846 5.5 1500
XB-2500 2500 2500 11.2 650 270 2966 2716 3528 17 3400
XB-3000 3000 3000 19 750 250 3500 3516 4446 22 5190
XB-3500 3500 3500 31 850 230 3920 3740 4970 22 7100
XB-4000 4000 4000 45 1000 210 4520 4320 5567 40 12510
38
MINERAL PROCESSING EQUIPMENT
XJK Flotation Machine
Flotation machine is applicable for the separation of
nonferrous metal and ferrous metals, such as fluorite
and talc. The impeller is driven by V-belts, which can
bring the centrifugal effect to form negative pressure.
While extracting sufficient air to mix with ore pulp, the
machine stirs ore pulp and mixes it with chemicals to
form mineralized froth.
By adjusting the height of the flash board to control, the
liquid level, the useful froth can be scraped from the
loam board. The height of the strobe must be adjusted carefully to keep the stabilization of liquid
level and scrape the mineralized froth to the launder. The impellers and stators should be kept at a
distance and should be changed when worn. The bearing in the pump should be maintained every
three months.
Flotation Machine Specification
Model volume
(m3/cell)
Blade
diameter(mm)
Capacity
(m3/min)
Rotation
Speed(r/min)
Power
(kw)
dimension
(mm/cell)
Weight
(T/cell)
XJK-0.35 0.35 300 0.15-0.5 470 2.2 700x700x700 0.45
XJK-0.62 0.62 350 0.3-0.9 400 3 900x900x850 0.85
XJK-l.1 1.1 500 0.6-1.6 330 5.5 110Ox1100x1000 1.4
XJK-2.8 2.8 600 1.5-3.5 280 11 1750x1600x1100 2.43
XJK-5.8 5.8 750 3-7 240 30 2200x2200x1200 3.53
XJC-4 4 700 3-6 190 10 l700x1700x1600 3.1
XJC-8 8 900 4-8 170 22 2200x2200x1800 3.95
XJQ-40 4 400 2-5 290-315 11 1600x2100x1350 3.3
XJQ-160 16 700 8-20 170-180 37 2800x3800x1700 9.46
39
MINERAL PROCESSING EQUIPMENT
NZ Centre drive concentrator
NZ (S) type (also called TNZ type) centre drive concentrator is
earlier traditional concentrated equipments, machines diameter
less than 12m work in manual condition, machines above 12m in
general way, using electric lift rake device. Large concentrator
usually adopts the concrete pool and have overload instructions
or alarm device. This machine structure is simple with small
wear, easy maintenance.
Specification of NZ(S) Centre Drive Concentrator
Model Concentration Pool Deposit
Area
(m)
Rake Rotary
Speed
(r/min)
Capacity
(t/d)
Motor Rotary
Speed
(r/min)
Dimension
(mm)
(LxWxH)
Weight
(kg) Diameter
(m)
Depth
(m)
Model Power
(kw)
NZ-1.8 1.8 1.8 2.55 0.5 1.3-5.6 Y90L-6 1.1 910 2000*1960*2900 1490
NZ-3.6 3.6 1.8 10.2 0.4 5-24 Y90L-6 1.1 910 3917*3787*3194 2875
NZ-6 6 3 28 0.3 14-62 Y90S-4 1.1 1430 6170*5170*5153 8575
NZ-9 9 3 63.5 0.26 32150 Y132S-6 3 960 10000*10000*5337 5370
NZ-12 12 3.5 113 0.19 <250 Y132S-6 3 960 15500*12000*6625 8880
NZ-15 15 3.6 176 0.113 390 Y132M2-6 5.5 940 17240*16000*7500 10557
NZ-18 18 3.6 250 0.1 552 Y132M2-6 5.5 940 19700*18860*7650 12338
40
MINERAL PROCESSING EQUIPMENT
GW Filter
Detailed introduction:
Filter is a kind of mining machinery filtering equipment for
filtering use.
1. Product Characteristics
GW out-cylinder filter, belonging to common normal filter, is
mainly used for filtering fine granularity and requests the
product for low aqueous pulp, through adjusted motor to
realize stepless speed. It has characters such as simple
structure, low price, easy use easy maintenance, less easy
worn parts etc.
2. Auxiliary Equipment
Need to work with suction system and gas water separation system (water automatically filtrate
tank).
Specification of GW Filter
Model
Filter
Area
(M2)
Cylinder
Speed
(r/min)
Stirrin
g
Times
(r/min)
Capacit
y
(t/h)
Reducer Motor
Dimension
(mm)
(LxWxH)
Weigh
t(
kg) Cylinder Mixer Cylinder Agitator
GW-3 3 0.066-0.662 25 0.3-4.2 YCT1324A WD4-59-0.8 1.1 0.8 2231x2450x1850 2500
GW-5 5 0.066-0.662 25 0.5-2 YCT1324A WD4-59-0.8 1.1 0.8 2531x2450x1850 2756
GW-8 8 0.13-0.26 23 0.7-3.8 YCT160-413 WD4.59-0.8 3 0.8 3043x2892x2370 5000
GW-10 10 0.13-0.26 23 1-4 YCT160-413 WD4-59-0.8 3 0.8 3443x2892x2370 5200
GW-12 12 0.3-0.2 23 1-4.8 YCT160-413 WD4-59-0.8 3 0.8 3843x2892x2370 5910
GW-20 20 0.14-0.54 23 3-8 YCT200-4A WD5-59-1.5 5.5 1.5 4480x4085x2890 10600
41
MINERAL PROCESSING EQUIPMENT
Dry magnetic separator
The Dry Magnetic Separator is one kind of efficient
equipment for processing fine, feebly magnetic
minerals, such as hematite, limonite, wolfram,
limonite, and tantalum-niobium, etc. Its magnetic
system is a ring-shape chain closed magnetic
circuit with energizing coils made of copper tube
and cooled internally by water. Grooved plates
made of magnetic conductive stainless steel are
used as magnetic matrix. It possesses the following
advantages: short magnetic circuit, little magnetic
flux leakage, high magnetic intensity, low energy consumption, fine beneficiating results, simple
structure and easy to maintain.
Dry magnetic separator Specification
Model 7518 9018 1018 1021 1024 1230 1530
body(DXLmm) 750*1800 900*1800 1050*1800 1050*2100 1050*2400 1200*3000 1500*3000
Capacity(tlh) 4050 4555 100120 125145 130-180 150-220 170-250
Feed size(mm) 08 08 08 010 010 0-10 0-10
Power(KW) 3 4 5.5 5.5 5.5 7.5 11
Ore humidity (%) ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
Rotation speed(r/min) 34 30 24.5 24.5 24.5 21 18
Magnetic intensity(OE) 2000-8000 2000-8000 2000-8000 2000-8000 2000-8000 2000-8000 2000-8000
42
MINERAL PROCESSING EQUIPMENT
GZ Rotary Dryer
Rotary Dryer is suitable for drying materials with
humidity in mineral dressing, building material,
metallurgy, chemical, etc.
Rotary Dryer is used for drying material which has
a certain temperature and size. It is mainly used
for building material industry drying slag, clay,
coal, carbon stone, sand etc; It can also be used
for metal mining processing and drying all kinds of
metal ore, leaching slag and tailings etc; It also
applies to steel plants drying coal, fluorite, iron
scale etc, and chemical industry, fertilizer industry and other industries.
Rotary Dryer Specification
Model Rotation
speed (r/inin)
Inclinati
on (%)
Input
temperature
(° C)
Capacity
(t/h)
Power
(kw)
Weight
(T)
GZΦ800x8000 3.8 5 700 0.8-2 5.5 3.5
GZΦ900xl0000 3.8 5 700 1-3 7.5 5.6
GZΦl200xl0000 3 5 700 2-6 11 9.6
GZΦl500xl2000 2.08 5 800 4-12 15 17.76
GZΦl800x 14000 2.08 5 800 8-25 18.5 29
GZΦ2200x 14000 4.7 5 800 12-30 22 33
GZΦ2400x18000 4 5 800 18-40 37 53.3
43
Contact to us
Tel:+90 2324224596,
Fax:+90 2324224596
http://www.ameg.com.tr
Alsancakli Makine Enerji Ve Gida ithalat ihracat Sanayi Ticaret ltd.sti
Turkiye Merkez : 1421 Sk. No:63 K:1 D:2 Mimar Sinan Mh.
Alsancak Izmir Turkiye Tel:+90 2324224596, Fax : Tel:+90 232422