Model Curriculum Lead Furniture Maker-Bamboo
(Option: Round Bamboo)
SECTOR: FURNITURE & FITTINGS SUB-SECTOR: Cane and Bamboo Furniture OCCUPATION: Furniture Making REF ID: FFS/Q4102, V2.0 NSQF LEVEL: 4
ii Lead Furniture Maker- Bamboo (Option: Round Bamboo)
iii Lead Furniture Maker- Bamboo (Option: Round Bamboo)
TABLE OF CONTENTS
1. Curriculum 01
2. Trainer Prerequisites 12
3. Annexure: Assessment Criteria 13
1 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Lead Furniture Maker- Bamboo (Option: Round Bamboo)
CURRICULUM / SYLLABUS
This program is aimed at training candidates for the job of a “Lead Furniture Maker- Bamboo (Option:
Round Bamboo)”, in the “Furniture & Fittings” Sector/Industry and aims at building the following key
competencies amongst the learner.
Program Name
Lead Furniture Maker-Bamboo (Option: Round Bamboo)
Qualification Pack Name & Reference ID
FFS/Q4102, V2.0
Version No. 2.0 Version Update Date 03/12/2019
Pre-requisites to Training
Class VIII
Training Outcomes
After completing this programme, participants will be able to:
Use various hand and power tools required in production of bamboo furniture.
Interpret technical drawings and sketches of bamboo furniture.
Estimate cost for making the bamboo furniture.
Carry out cutting, trimming and joining of bamboo pieces according to the requirement.
Assemble different parts to make the final product
Check the quality of the finished product.
Maintain the work area, tools and equipment properly.
Follow health, safety and environment norms at workplace.
Work effectively with all the stakeholders for various functional activities.
2 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
This course encompasses 5 out of 5 Compulsory NOS (National Occupational Standards), 2 out of 2
Optional NOS of “Lead Furniture Maker-Bamboo (Option: Round Bamboo) - FFS/Q4102” Qualification
Pack issued by “Furniture & Fittings Skill Council”.
Sr No Module Key Learning Outcomes Equipment required
1 Introduction to the furniture and fittings industry Theory Duration (hh:mm) 08:00 Practical Duration (hh:mm) 00:00 Corresponding NOS Code Bridge Module
Discuss about the furniture and fittings industry
Discuss about the market scenario of bamboo furniture in India
Explain the role of a lead furniture maker-bamboo and its job opportunities in the industry
Discuss about the career path of a lead furniture maker-bamboo
2 Organizational context/ company/ employer Theory Duration (hh:mm) 08:00 Practical Duration (hh:mm) 00:00 Corresponding NOS Code FFS/N4103
Explain the importance of code of conducts, policies, manuals, rules and regulations followed in a typical organization
Describe organization structure and hierarchy followed in a typical organization
Describe functions of different divisions/ teams of an organization
3 Health and safety at workplace Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N8601
Explain the importance of maintaining a healthy and safe work environment
Differentiate between the potential risk, hazard and threat at the workplace
List the safety, ergonomic, physical, biological, and chemical hazards at workplace
Explain the precautionary measures to be taken to prevent different hazards
Discuss the ways of undertaking the first aid activities in case of different types of accidents
Demonstrate the use of personal protective equipment/ protective clothing
Gloves, safety shoes, safety cap/helmet, earplugs, goggles, nose mask, first aid box, apron, different types of fire extinguisher
3 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Demonstrate how to keep correct body posture while standing, working, lifting and carrying heavy materials
List various do’s and don’ts of good housekeeping practices
Demonstrate the methods of doing basic safety checks for all machines, tools, and electrical equipment before work
Explain various safety signs/ instructions
Ensure general health and safety equipment are available at the workplace
Comply with restrictions imposed on harmful materials while working at workplace
4 Handling emergencies Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N8601
List the precautionary measures for prevention of accidents at the workplace
List various common causes and types of fires
List the common types of fire extinguishers
Demonstrate the use of fire extinguishers on different types of fires
Describe the evacuation procedures to be followed in case of an emergency, accident, fire, or a natural calamity
Demonstrate how to free a person from electrocution
Demonstrate the correct rescue techniques applied during fire hazards
Explain the importance of responding promptly and accurately to an accident situation
Gloves, safety shoes, safety cap/helmet, earplugs, goggles, nose mask, first aid box, apron, different types of fire extinguisher
5 Communication skills Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N8801
State the importance of possessing effective communication skills
Explain the importance of setting up good working relationship with others
Explain the significance of active listening, correct receiving of information and instructions
Describe the importance of seeking assistance/ clarification from supervisor/ senior
Describe the importance of discipline, ethics, and integrity for professional success
Explain the reporting protocol in case of queries on procedures, products, or any problem
Demonstrate how to communicate effectively with others
4 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
6 Team work Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N8801
Discuss the importance of coordination with colleagues to achieve work objectives
Explain the importance of sharing information with team wherever and whenever required to enhance quality and productivity at workplace
Discuss how to manage interpersonal conflict
Describe the significance of interacting politely with team members
State the importance of following dress code at workplace
Describe the importance of professional skills such as planning and organizing, problem solving, objection handling, and critical thinking
Participate in team building activities effectively
7 Understand the requirement of tools and materials Theory Duration (hh:mm) 08:00 Practical Duration (hh:mm) 20:00 Corresponding NOS Code FFS/N4103
List different species of bamboo used in furniture making
Distinguish among bamboo strips, slates, panels and culms
Identify different types of consumables, tools, machines, materials and their usage
Demonstrate methods of cleaning and maintaining tools, equipment and materials
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
8 Interpreting drawing and design specification Theory Duration (hh:mm) 08:00
Explain different shapes, symbols and abbreviations in the drawing of bamboo furniture
Explain the measurement units mentioned in the drawing
Demonstrate how to read and interpret the drawing
5 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N4103
9 Calculating cost Theory Duration (hh:mm) 08:00 Practical Duration (hh:mm) 16:00 Corresponding NOS Code FFS/N4103
Discuss various factors which effect the cost of a furniture product
Calculate the cost considering furniture styles, durability, patterns, comfort, materials, accessories and labour
Calculate cost benefit ratio of the final furniture product
10 Preparing work area for bamboo furniture making Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 12:00 Corresponding NOS Code FFS/N4103
Demonstrate how to check working condition/ shortage/ defect of the selected tools, machines and materials
Demonstrate how to check material for any splits, defects or treatment against insects, fungus and weather exposures
Discuss the importance of reporting any shortage or defect of materials/ hardware to the supervisor/ senior before commencement of work
Discuss the importance of keeping work area clutter free before commencement of work
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
11 Measuring, marking and cutting procured bamboo Theory Duration
Discuss the techniques of measurement and marking of bamboo materials
Demonstrate the method of marking techniques on bamboo pieces
Explain the importance of correct
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-
6 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
(hh:mm) 08:00 Practical Duration (hh:mm) 28:00 Corresponding NOS Code FFS/N4104
cutting techniques to minimise waste
Demonstrate the correct method of cutting procured bamboo safely into different sizes after doing the test run
shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
12 Making bamboo furniture components Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 28:00 Corresponding NOS Code FFS/N4104
Discuss about different components of bamboo furniture
Explain the importance of making components in sequence depending upon the type of furniture
Demonstrate the way of making furniture components
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
13 Assembling and joining Theory Duration (hh:mm) 04:00
Explain about various joints and their importance in bamboo furniture making
Demonstrate the method of making joints, joint pin, bamboo plug, bamboo nails and dowels for bamboo furniture
Explain about smoothening the
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-
7 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Practical Duration (hh:mm) 28:00 Corresponding NOS Code FFS/N4104
surface, assembling and sealing the joints
Demonstrate the steps of assembling bamboo furniture components appropriately using bamboo joining techniques
shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
14 Quality checking of bamboo furniture (hh:mm) 04:00 Practical Duration (hh:mm) 28:00 Corresponding NOS Code FFS/N8401
Explain the importance of quality checks of the products at intervals
Explain the ways of taking appropriate action for rectification of the faults
Explain the importance and process of communication to the supervisor/ senior when product is not as per the standard
Demonstrate the process of checking and rectifying symmetry, angles, structural strength and any irregularities in final finish of the product
COMPULSORY NOS: Total Duration Theory Duration 80:00 Practical Duration 180:00
Unique equipment required for the QP: Gloves, earplugs, goggles, nose mask, safety shoes, apron, safety cap/helmet, first aid box, fire extinguisher Steel rule, measurement tape, inside and outside calliper Dado, chisel set, dropping knife, width seizers, scissors, hammer, round planer/knot remover, scrapper, blow torch, vice, grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container Power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler Bamboo of required diameter, slats adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire Classroom aids: Blackboard, chalks, duster
8 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
OPTIONS (Optional to choose any or all or none)
OPTION 1: Round Bamboo
Sr No Module Key Learning Outcomes Equipment required
1 Understand the requirement of tools and materials Theory Duration (hh:mm) 02:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N4101
List the tools, equipment and materials required for round bamboo furniture making
Demonstrate method of selection of right aged, coloured round bamboo poles suitable for furniture making
Explain traditional/ chemical treatment of bamboo poles before making furniture
Demonstrate the ways of handling and maintaining tools
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
2 interpreting sketches, drawings and designs Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4101
Explain the details of furniture drawing
Demonstrate how to read and interpret details of furniture drawing
3 Preparing cost estimates Theory Duration (hh:mm) 04:00
Discuss various factors which effect the cost of a furniture product
Calculate the cost considering furniture styles, durability, patterns, comfort, appearance, materials and labour
9 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4101
4 Preparing work area for furniture making Theory Duration (hh:mm) 02:00 Practical Duration (hh:mm) 04:00 Corresponding NOS Code FFS/N4101
Discuss the importance of checking working condition/ shortage/ defect in selected tools, machines and materials
Demonstrate ways of checking round bamboo for any splits, defects or treatment against insects, fungus and weather exposures
5 Measuring, marking and cutting activities Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4102
Explain measuring, marking and cutting methods of round bamboo
Demonstrate the correct technique of marking round bamboo
Demonstrate the correct method of cutting round bamboo into required pieces
6 Making round bamboo furniture Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4102
Explain about the components of round bamboo furniture
Demonstrate the way of making different furniture components from round bamboo culms
Explain joining and lashing techniques
Demonstrate the steps of making different joints
Demonstrate the method of assembling furniture components using joints
Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife, pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, pencil, marker, staple gun, power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler, bamboo cross cutting machine, hand
10 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, bamboo of required diameter, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire
7 Finishing Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4102
Explain the sanding method of bamboo furniture
Explain the method of filling cracks or unwanted cavities
Demonstrate sanding of the surface for smoothness
Demonstrate the method of filling cracks and unwanted cavities
Buffing wheel, hand buff, wax polish clothe, sand paper, oil pad, lacquer spray gun, paint brush, roller coating
8 Working Safely Theory Duration (hh:mm) 04:00 Practical Duration (hh:mm) 08:00 Corresponding NOS Code FFS/N4102
Explain the importance of health and safety legislation/ regulations/ other relevant guidelines
Demonstrate the ways of handling and using tools and equipment safely
Gloves, safety shoes, safety cap/helmet, earplugs, goggles, nose mask, first aid box, fire extinguisher
Option 1: Total Duration Theory Duration: 28 hours Practical Duration: 56 hours
Grand Total Duration Minimum duration for the QP= 260 hrs Theory: 80 hrs Practical: 180 hrs
Unique equipment required for the QP: Gloves, earplugs, goggles, nose mask, safety shoes, safety cap/helmet, safety cap/helmet, first aid box, fire extinguisher Dado, chisel set, dropping knife, hammer, round planer/knot remover, scrapper, blow torch, vice, angle grinder, hand plane, V-shaped knife,
11 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Maximum duration for the QP= 344 hrs Theory: 108 hrs Practical: 236 hrs
pointed knife, mallet, wood saw, hacksaw, pliers, hand drill and bits, sand container, staple gun Power saw, power drill, hand cutting machine, hand splicer, surface planer, trowel, tumbler Bamboo of required diameter, slats, adhesive, sand paper, nails, cane (3-4mm for binding), wood pegs, bending wire Bamboo cross cutting machine, hand held bamboo splitter, hot air gun, edge trimmer machine, hand engraver machine, stand drill machine, stand zig saw, chalk liner, buffing wheel, hand buff, sand paper, wax polish clothe, oil pad, lacquer spray gun, paint brush, roller coating Classroom aids: Blackboard, chalks, duster
(This syllabus/ curriculum has been approved by Furniture & Fittings Skill Council)
12 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Trainer Prerequisites for Job role: “Lead Furniture Maker- Bamboo (Option: Round Bamboo)” mapped to Qualification Pack: “FFS/Q4102, V2.0”
Sr. No.
Area Details
1 Description To deliver accredited training service, mapping to the curriculum detailed above, in accordance with the Qualification Pack “FFS/Q4102, V2.0”.
2 Personal Attributes
Aptitude for conducting training, and pre/ post work to ensure competent, employable candidates at the end of the training. Strong communication skills, interpersonal skills, ability to work as part of a team; a passion for quality and for developing others; well organized and focused, eager to learn and keep oneself updated with the latest in the mentioned field
3 Minimum Educational Qualifications
Minimum 10th pass
Minimum age 25 years
4a Domain Certification
Certified for Job Role: “Lead Furniture Maker- Bamboo (Option: Round Bamboo)” mapped to QP: “FFS/Q4102,V2.0”. Minimum accepted score 80% as per the FFSC guideline.
4b Platform Certification
Recommended that the Trainer is certified for the Job Role: “Trainer”, mapped to the Qualification Pack: “MEP/Q2601”. Minimum accepted score as per respective FFSC guideline is 80%.
5 Experience Minimum five years of experience in furniture making especially in bamboo furniture making
13 Lead Furniture Maker- Bamboo (Option: Round Bamboo)
Annexure: Assessment Criteria
Please refer to the QP PDF for the Assessment Criteria.