Model in photo is shown with optional accessories.
A2-Plus Size Multi-Color Offset Presses
RYOBI 680 series682 / 682P / 684 / 684P / 685 / 685P / 686 / 686P / 688P / 6810P
Quick task changing capability to accommodate today's shorter-run, more diversified jobs. Consistent high print quality even at high speeds of 15,000 sheets per hour. These are the biggest advantages of the RYOBI 680 Series. In pursuit of production efficiency, RYOBI 680 Series presses incorporate an abundance of advanced automatedsystems. Yet, they require less operation skill thanks to their numerous user-friendly features. Designed to further increase profitability, these versatile presses are the ideal solution to the strict demands for productivity and quality of today's commercial printing industry.
RYOBI 680 series
RYOBI 684/684PA2-Plus Size 4-Color Offset Press
RYOBI 686 (Type 6-A : 6-color)
02 03
RYOBI 685/685PA2-Plus Size 5-Color Offset Press
RYOBI 682/682PA2-Plus Size 2-Color Offset Press
RYOBI 686/686PA2-Plus Size 6-Color Offset Press
RYOBI 688PA2-Plus Size 8-Color Offset Press
RYOBI 6810PA2-Plus Size 10-Color Offset Press
The Ideal Press for Boosting Profitability
04
Efficient job changeover improves profitability.RYOBI believes that shortening the make-ready time during job changeovers _ including paper changing, cleaning, plate changing, registration, and color adjustment _ is key to raising operating rates and improving profitability.
RYOBI Program Inking for Quick Printing SetupRYOBI Program Inking has been upgraded.RYOBI Program Inking automatically sets the conversion curve for each color accord-ing to the image area ratio data calculated at prepress. The ink settings, ink fountain roller speed, and number of contacts by the ink ductor roller are all controlled based on the conversion curves to assure the opti-mum ink volume.
Start Inking
Minimum amount of inksupplied to rollers
Correction of Inking
Correct amount of inkon rollers
Measure the density on the printed sheet and inputs the data *1
Set No. of printsfinished
Preset Inking
Automatic ink supplyto match image
Smart End Inking
Ink on rollers returnedto even state
Printing startsautomatically
Production printingInk ductor control function
for small image
1st job
after 2nd job
Ink kneading
No ink on rollers
*1:Only for the press with RYOBI PDS-E AUTO/RYOBI PDS-E
RYOBI Program Inking Flowchart
05
RYOBI Semiautomatic Plate Changer
Automatic Cleaning Devices
Automatic blanket cleaning device
RYOBI semiautomatic plate changerFanout clamp Plate mounting mechanism
The various automatic cleaning devices of the RYOBI 680 series [automatic blanket cleaning device, automatic impres-sion cylinder cleaning device (option), automatic ink roller cleaning device (option)] reduce the time and effort involved in cleaning and changing colors, reducing the burden on the operator.The RYOBI PCS-G Printing Control System at the delivery side of the press allows the operator to turn each device ON and OFF, as well as select the cleaning pattern according to the degree of cleaning required.
(Option)
Note: The pull side guide preset system comes as standard equipment. Feeder head preset, delivery section preset, and impression pressure preset systems are available as options. (The impression pressure preset system includes pro-gram-controlled impression cylinder cleaning function.)
*682P/684P/685P/686P/688P/6810P: –2 mm (0.079")
Productivity
Paper Size and Impression Pressure PresetsThe RYOBI 680 Series allows the operator to enter preset val-ues for paper size and thickness using the touch-panel dis-play. Positions of the feeder head and delivery section guides as well as pull side guides can be preset. Plus, an impression pressure preset system is also available.
Plate Register Remote Control DeviceThis system allows the operator to make minute vertical, lat-eral and diagonal image position adjustments at the delivery side. Adjustments can be made in increments of 0.01mm (0.0004") within a range of ±1.0 mm* (0.039") vertically, ±2.0 mm (0.079") laterally and ±0.20 mm (0.008") diagonal-ly (at maximum printing area).
The RYOBI semiautomatic plate changer comes as standard equipment and allows plates to be changed quickly and accu-rately. The operator merely sets the plate on the positioning pins and presses the button. A plate bending device is unnec-essary as there is no need to bend the leading edge or the tail edge of the plate. This automated system allows easy reuse of the stored printing plate and can handle polyester-based plates as well as metal plates. Plus, lateral image inaccuracy that may occur due to paper stretching can be adjusted with the fanout clamp.
06
An optimized digital workflow gives you total control over production and quality.RYOBI believes that an optimized digital workflow is key to survival in the printing industry, as it enables smooth connection of prepress, printing, and postpress operations as well as consistent control by a CIP4/JDF-compliant management information system for handling everything from the receipt of orders to delivery.
Printing Density Control SystemRYOBI PDS, PDS-E AUTO, PDS-EThe RYOBI PDS, PDS-E AUTO and PDS-E Printing Density Control System measure the color bar of the printed sheet using a spectrophotometer with special sensors (a densitometer is used for the PDS-E AUTO and PDS-E). Values needed to correct the color densities to match those of the OK sheet are calculated and provided as feedback to the RYOBI PCS-G, which appropriately adjusts the openings of the ink fountain keys. Quality control that previously re-lied on human experience and intuition is now done using precise numerical val-ues, contributing to consistent printing.
RYOBI PDS-E AUTO
Almost the entire operation flow from make-ready through printing _ including paper changing, cleaning, printing settings, registration, color adjustment, water control, and other operations - can be centrally controlled by the RYOBI PCS-G printing control system.
RYOBI PCS-G Printing Control System
(Option)
07
MIS
dataPS
DEMIA
NETWORK (image area ratio data)
(CIP3/CIP4)
Ink Volume Setter software (for PS)Ink Volume Setter-CIP4(PPF) software
Floppy disk (image area ratio data)
filePPF
RYOBI PDS controls a total of 6 presses(2 standard and 4 optional)
Transmits corrected color data
Printing Control System RYOBI PCS-G
RYOBI PDS / PDS-E AUTO / PDS-EPrinting Density Control System
Spectrophotometer measures color bar of printed sheet
(Densitometer is used for PDS-E AUTO / PDS-E)
Job Direction Data
Job Result Data
For more detailed information on the MIS, consult your dealer.
MIS (Management Information System)
MIS connection software (for CIP4-JDF)
RYOBI RP780-425M
The image area ratio data is calculated by the Ink Volume Set-ter software (option) using PostScript data created on either a Macintosh*1 or Windows*2 computer, and then converted by the RYOBI PCS-G to preset the ink fountain keys. Ink Vol-ume Setter-CIP4 (PPF) software (option) allows the image area ratio data to be calculated from PPF files.Effective use of prepress data can dramatically reduce the la-bor involved in adjusting the ink fountain keys prior to pro-duction printing.
The CCD camera scans the register marks exposed on the plate, and the register marks are displayed on the center moni-tors. By checking the monitors, diagonal, vertical and lateral micro-adjustments can be done easily by dial operation, assuring accurate plate punching with simple lever operation.The RYOBI RP740-425AUTO, available as an option, enables fully automatic serial punching.
High-Precision Register PunchInk Volume Setter Ink Volume Setter-CIP4 RYOBI RP740-425AUTO/RYOBI RP780-425M
(for PostScript data)
(PPF) (Option) (Option)
*1: Macintosh is a registered trademark of Apple Computer, Inc.*2: Windows is a registered trademark of Microsoft Corporation in the United States and other countr ies.
(Option)
MIS Connection Software (for CIP4-JDF) (Option)
Digital Workflow
The MIS connection software links a CIP4-JDF compatible management information systems and RYOBI printing presses to enable printing process management from the MIS (Management Information System).MIS connection software for CIP4-JDF enables real-time ex-change using the CIP4-JDF data format for sharing job direc-
tion data (including job name, number of printing sheets, pa-per size) and production data (including the printing start time, end time, and number of printed sheets) between the MIS and RYOBI PCS-G printing control system.
08
RYOBI-matic Continuous Dampening SystemRYOBI-matic-D / RYOBI-matic-D Remote Continuous Dampening System
The RYOBI-matic-D Continuous Dampening System with Hickey Removing Function and RYOBI-matic-D Remote Continuous Dampening System with Remote ON/OFF Hick-ey Removing Function substantially reduce hickeys on plates by adopting a drive mechanism for the water form roller that creates a rotational speed difference between the water form roller and plate cylinder.A hickey picker is also available as a standard.
The RYOBI-matic continuous dampening system assures a uniform dampening supply on the plate surface to reproduce sharp halftone dots, glossy solids and finely detailed text. Starting is quick and is designed to minimize wasted sheets. Switching between integrated mode and separated mode from the touch-panel display is easy, in order to exactly match the image and characteristics.
(Option)
Various Innovative Mechanisms GuaranteeHigh-Quality Printing.A double-diameter configuration using cylinders with a large curvature ratio assures stable sheet transport. Superior inking and dampening mechanisms supply ink and water at a stable rate from low to high speeds.The infeed system maintains high registration accuracy even during high-speed printing of 15,000 sheets per hour. RYOBI’s printing mechanisms support high-quality printing and have an outstanding reputation among customers.
09
Ink roller temperature control system
High Quality
High-Speed Infeed MechanismBy utilizing an underswing and drop-away front lay infeed system in the registration section, high registration accuracy is maintained even during high-speed operation at 15,000 sheets per hour.
High Durability and PrecisionTo cope with market demand for shorter delivery times for printed materials, we have made press durability a top priority.The use of cylinders supported by ultra-precision bearings, precision induction-hardened helical gears, and special cast-iron side frames which offer solid support to these compo-nents-all ensure the highest durability and accuracy over the long term, even at high operating speeds of 15,000 sheets per hour.
Double-Diameter Printing MechanismThe printing unit consists of a double-diameter impression cylinder and a double-diameter transfer drum.These cylinders, which have a large curvature ratio, transport paper with minimum flapping, providing stable paper trans-port even when printing on heavy stock.
Grippers for Reliable Sheet TransportStrong, lightweight gripper mechanism offer high reliability and durability. Ryobi also utilizes cam-closed and double sprung gripper mechanisms which employ torsion bars on all gripper shafts. Achieving reliable sheet gripping, whether at low or high speeds, results in consistent registration accuracy.
Superior Inking PerformanceAn optimum ink roller configuration designed by computer analysis assures stable ink supply and superb response to ink volume adjustments. The motor-driven ink fountain rollers are programmed to automatically operate in synchronization with the speed of printing, and this enables a stable supply of ink at any operation speed.
Ink Roller Temperature Control SystemBy circulating temperature-controlled water inside the oscillat-ing rollers and fountain rollers, roller temperature is main-tained at the optimum level.Minimum variations in ink roller temperature ensure consis-tent print quality, even during long print runs.
(Option)
10
Boost Productivity and Add ValueAn inline coating unit further boosts productivity and adds value by enabling application of aqueous or UV varnish coating.A variety of dryer units help to shorten delivery time, provide high added value to printing jobs, and expand capabilities.
Choice of Three Delivery Systems to Match Drying SystemsThe delivery section comes in three types: semi-long delivery and long delivery, both of which can be equipped with a dry-er, and standard delivery. Drying aqueous coatings is done with a system that uses a combination of heat from an infra-red dryer as well as heated and ambient air knives. The infra-red dryer and the air knives can be adjusted to provide opti-mum drying of inks and coatings, and deliver ample drying capacity even during high-speed operation. A UV curing unit can be built into the press for applications such as print-ing that demands quick drying times and glossy printing. RYOBI 685
(Type 5-D : 5-color with coating and semi-long delivery)
11
Coating Unit
Inline Coating
Inline Coating SystemAqueous or UV varnish coating can be processed inline using a retractable coating unit. In addition to adding value to prin-ted materials, such as surface protection and glossy finishes, this system also shortens drying time for a shorter delivery time.The universal clamp can accommodate either a blanket with an aluminum bar or a nylon plate attached to a metal plate, enabling spot coating as well as overall coating.During printing the device enables easy adjustment of the coat-ing position vertically, laterally or diagonally, greatly simplify-ing spot coating.When the varnish coating system is not being used, the entire coating cylinder and anilox roller can be easily slid upward at the touch of a button to prevent marking on the sheet. Then, a safety guard between the main press unit and coating cylinder allows maintenance work (such as cleaning the coating cylinder or mounting blankets) even while the press is in operation. This enables faster switchover to the next printing job.
6
5
1
2
4 3
(1) Anilox roller(2) Coating cylinder(3) IR dryer(4) UV curing unit(5) Air suction(6) Water-cooled plate
12 13
Mechanical configuration:RYOBI 688P (type 8-Eb4)
4-color press
4-color press
8-color convertible perfector
Blank paper
Front-side-printed sheets
Completed work
1
2
3
1
1
12
2
3
3
3
Make-ready for front-side printing
Plate changing
Registration and color adjustments
Drying time for front sidePrinting
Make-ready for back-side printing
Plate changing
Registration and color adjustments
Printing
Postpress process
Postpress process
Time savedMake-ready
Plate changing
Registration and color adjustments
Printing
Using a conventional 4-color straight printing press
Comparison of 4-color Perfecting ProcessUsing the RYOBI 688P offset press
One-pass full-color perfecting RYOBI 688P/6810P
Ryobi’s Fully Automatic Convertible PerfectingDevice Boosts Productivity.The perfecting device on the Ryobi 682P, 684P, 685P, 686P, 688P and 6810P can be converted between straight printing and perfecting fully automatically, boosting productivity by significantly reducing time loss for the mode change. Moreover, perfecting is possible at a rate of 15,000 sheets an hour, one of the fastest in the industry.
Fully Automatic Convertible Perfecting DeviceSwitching between straight printing and perfecting can be performed remotely from the delivery side via the RYOBI PCS-G Printing Control System. The operator simply inputs the paper size and selects a printing mode from the touch panel display. Various perfecting device settings switch auto-matically to match the paper size. These include the open/close timing of the grippers on the stor-age drum and turning drum, the position of the paper tail edge suction mechanism, and the phase of the turning drum and storage drum. Thanks to this fully automatic device, switchover operation can be finished within 2 minutes without using any tools, contributing to minimum time loss for the mode change.
The biggest advantage of a convertible perfector is one-pass full-color perfect-ing. Unlike a straight printing press, no time is lost waiting for the front side to dry after printing or for paper piling when printing the back side. Printing takes only half the time, of course, com-pared to printing both sides with two pas-ses on a 4-color straight printing press. Mounting an interdeck UV curing unit over the impression cylinder makes possi-ble quick-dry perfecting. This boosts pro-ductivity and enables flexible handling of jobs a with short turnaround time.
Economical efficiency and a clean work environmentImage registration for both sides is per-formed in a one-pass process, so there is much less paper waste compared to print-ing both sides with a straight 4-color printing press.A convertible perfector can perform more work than two straight 4-color print-ing presses. Moreover, no space is needed for drying after printing the front side, conserving valuable printing factory space.
Perfecting
Automatic ink roller cleaning device
Automatic blanket cleaning device
Automatic impression cylinder cleaning device
Storage drum
Transfer drum
Turning drum
Inter-deck UV curing unit
Air blower
UV curing unit
IR dryer
Anilox roller
Coating cylinder
Water-cooled plate Air guide plate
14 1615
Versatile Lineup
Combination Chart RYOBI 684 / 685 / 686
Full Product Lineup Meets Diverse Needs.
4-A
4-B
4
4
4-C 4
4-D 4
4-E 4
RYOBI 684 Combination Chart
RYOBI 686 Combination Chart
5-A
5-B
5
5
5-C 5
5-D 5
5-E 5
RYOBI 685 Combination Chart
6-A
6-B
6
6
6-C 6
6-D 6
6-E 6
Combination Chart RYOBI 688P / 6810P
RYOBI 688P Combination Chart
RYOBI 6810P Combination Chart
8-Aa4
8-Ba4
8/0,4/4
8/0,4/4
8-Bb4 8/0,4/4
8-Ca4 8/0,4/4
8-Cb4 8/0,4/4
8-Da4
8-Ea4
8/0,4/4
8/0,4/4
8-Eb4 8/0,4/4
10-Aa5 10/0,5/5
10-Aa4 10/0,6/4
10-Ba5 10/0,5/5
10-Ba4 10/0,6/4
10-Bb5 10/0,5/5
10-Bb4 10/0,6/4
10-Ca5 10/0,5/5
10-Ca4 10/0,6/4
10-Cb5 10/0,5/5
10-Cb4 10/0,6/4
10-Ea5 10/0,5/5
10-Ea4 10/0,6/4
10-Eb5 10/0,5/5
10-Eb4 10/0,6/4
10-Da5 10/0,5/5
10-Da4 10/0,6/4
TypeNumber of
printingunits
Coating unit*2 Standard Semi-long
Delivery type
Long Infrareddryer
UV curingunit
DryerInter-deckUV curing
unit*3
Mechanical side view
*1 *1
*1 *1
Type 8-Da4
Type 10-Aa5
Type 10-Aa4
Type 10-Bb5
Type 10-Bb4
Type 8-Bb4
Type 8-Aa411,073 mm (36’4")
12,340 mm (40’6")
12,851 mm (42’2")
12,845 mm (42’2")
14,112 mm (46’4")
14,112 mm (46’4")
13,226 mm (43’5")
Convertible perfecting device
*1: A drying unit is not provided for standard delivery models. In addition to the drying unit shown above, special orders are also accepted. For details, please contact a sales representative.*2: There are some limitations for coating and drying when perfecting. For more information, please ask your dealer.*3: When mounting the UV curing unit in the delivery, the inter-deck UV curing unit is mounted over the storage drum of the convertible perfecting device. For other configurations or other applications, please ask your dealer.
Option , Not availableStandard equipment , Option (field installation possible) ,
*1: A drying unit is not provided for standard delivery models. In addition to the drying unit shown above, special orders are also accepted. For details, please contact a sales representative.*2: Either infrared dryer or UV curing unit can be equipped.*3: The semi-long delivery model can equip with either coating unit or UV curing unit.*4: There are some limitations for coating and drying when perfecting. For more information, please ask your dealer.*5: When mounting the UV curing unit in the delivery, the inter-deck UV curing unit can be mounted over the storage drum of the convertible perfecting device as a special order. For other configurations or other applications, please ask your dealer.
Option , Not availableStandard equipment , Option (field installation possible) ,
*1: A drying unit is not provided for standard delivery models. In addition to the drying unit shown above, special orders are also accepted. For details, please contact a sales representative.*2: Either infrared dryer or UV curing unit can be equipped.*3: The semi-long delivery model can equip with either coating unit or UV curing unit.
Option , Not availableStandard equipment , Option (field installation possible) ,
6-A1
6-A2
6(6/0,5/1)
6(6/0,4/2)
6-B1 6(6/0,5/1)
6-B2 6(6/0,4/2)
6-C1 6(6/0,5/1)
6-C2
6-D1
6(6/0,4/2)
6(6/0,5/1)
6-D2 6(6/0,4/2)
6-E1 6(6/0,5/1)
6-E2 6(6/0,4/2)
5-A1
5-A2
5(5/0,4/1)
5(5/0,3/2)
5-B1 5(5/0,4/1)
5-B2 5(5/0,3/2)
5-C1 5(5/0,4/1)
5-C2
5-D1
5(5/0,3/2)
5(5/0,4/1)
5-D2 5(5/0,3/2)
5-E1 5(5/0,4/1)
5-E2 5(5/0,3/2)
RYOBI 686P Combination Chart
RYOBI 685P Combination Chart
4-A
4-B
4(4/0,2/2)
4(4/0,2/2)
4-C4
(4/0,2/2)
4-D4
(4/0,2/2)
4-E4
(4/0,2/2)
RYOBI 684P Combination Chart
Combination Chart RYOBI 684P / 685P / 686P
TypeNumber of
printingunits
Coating unit*4 Standard Semi-long
Delivery type
Long Infrareddryer
UV curingunit*5
DryerType
Number ofprinting
units
Coatingunit Standard Semi-long
Delivery type
Long Infrareddryer
UV curingunit
DryerMechanical side viewMechanical side view
Type 4-A
Type 5-A1
Type 6-A1
Type 6-D2
Type 6-E1
Type 5-D2
Type 5-E1
Type 4-D
Type 4-E
7,529 mm (24’8")
8,415 mm (27’7")
10,569 mm (34’8")
11,521 mm (37’10")
9,301 mm (30’6")
11,455 mm (37’7")
12,408 mm (40’9")
1,87
0 m
m
(6’2
")
7,166 mm (23’6")
8,052 mm (26’5")
8,938 mm (29’4")
11,092 mm (36’5")
12,045 mm (39’6")
10,206 mm (33’6")
11,158 mm (36’7")
9,319 mm (30’7")
10,272 mm (33’8")
1,87
0 m
m
(6’2
")
9,682 mm (31’9")
10,635 mm (34’11")
*1 *1
Type 4-A
Type 5-A
Type 5-D
Type 5-E
Type 6-A
Type 6-D
Type 6-E
Type 4-D
Type 4-E
*1 *1
*2 *2 *3
*1 *1
*2 *2 *3
*1 *1
*2 *2 *3
*2 *2 *3
*1 *1
*2 *2 *3
*1 *1
*2 *2 *3
17
Standard Equipment Optional Equipment
RYOBI PCS-G Printing Control System
(Network kit for Ink Volume Setter is included.)
RYOBI Semiautomatic Plate Changer
RYOBI Program Inking (built-in, with the RYOBI PCS-G)
Pull Side Guide Preset System
RYOBI-matic Continuous Dampening System
Dampening Solution Cooling / Circulation Device
Plate Register Remote Control Device (vertical, lateral, diagonal)
Automatic Blanket Cleaning Device for normal offset printing
Static Eliminator (blower type at the feeder side)
Suction Tape Feeder Board
Pull Side Guide Suction Wheel
Side Lay Sensor
Front Lay Blower
Double Sheet Detector (mechanical & electronic)
Slewed Paper Detector
Paper Transfer Jam Detector
Delivery Jam Detector
Preset Repeat Counter with Batch Function (electronic, 5-digit)
Print Counter (total number of printed sheets, non-resettable)
Machine Counter (total number of machine rotations, non-resettable)
OK Monitor
Powder Spray Device
Delivery Decuring Device
Nonstop Delivery Racking System
Hickey Picker
Open Type Doctor Blade Coating System for Models Equipped with Coating Unit
Movable Type Paper Guide
Printing Density Control System RYOBI PDS/PDS-E/PDS-E AUTO
Paper Size Preset System*1
Impression Pressure Preset System
(includes Program-Controlled Impression Cylinder Cleaning Function)*1
Ink Roller Temperature Control System*1
Automatic Impression Cylinder Cleaning Device*2
(For normal printing, for UV printing)
Automatic Blanket Cleaning Device for UV printing
Automatic Ink Roller Cleaning Device*1
(For normal printing, for UV printing)
Nonstop Feeder*1
Skid Type Paper Pile Board*1
Racking Board Back Guide*1
Infrared Dryer *2
UV Curing Unit *2
RYOBI RP740-425AUTO (automatic punch)
RYOBI RP780-425M (manual punch)
Ink oscillating form roller
RYOBI-matic-D Continuous Dampening System with Hickey
Removing Function
RYOBI-matic-D Remote Continuous Dampening System with Remote
ON / OFF Hickey Removing Function*1
UV Roller/UV Blanket
Ink Volume Setter Software (for PS)
Ink Volume Setter -CIP4 (PPF) Software
MIS connection software
Ultrasonic Type Double Sheet Detector*1
Automatic Dampening Solution Supply Device
(includes automatic alchohol / etching solution supply device)
Intermediate Tank for Dampening Solution Cooling / Circulation Device
Mechanical Dimensions
*1 Factory installation only*2 Factory installation recommended
RYOBI PCS-G Operation StandRYOBI PDS Operation StandInfrared Dryer Control BoxAqueous Coating Circulation DeviceCoating BarrelAir CompressorDampening Solution Cooling/Circulation Device
The illustration shows the RYOBI 684 with a coating unit and infrared dryer in a semi-long delivery system (type 4-D). Since installation space and peripheral equipment will vary ac-cording to the model, please consult your sales representative for further details.
*Standard delivery: 2,293 mm (7’7") Long delivery: 4,513 mm (15’)
Design and specifications are subject to change without notice.The specifications may differ slightly depending on the country.
1
2
3
4
5
6
7
1,90
0 m
m(6
’3")
2,30
0-2
,400
mm
(7’7
"-7’
10")
1,70
0 m
m(5
’8")
1,87
0 m
m (6
’2")
4,873 mm (16’2")3,560 mm* (11’10")886 mm(2’11")
2,91
0 m
m (9
’7")
600
mm
(2’)
580 m
m(1
’11")
1,18
5 m
m(3
’11")
1,61
0 m
m(5
’3")
930 mm(3’1")
1,060 mm(3’6")
Specifications
Copyright ' 2007 RYOBI LimitedCat.No.680(P18) Apr.’07 E01 HB10
Order No. H5794 01 02Printed in Japan
GRAPHIC SYSTEMS DIVISION:800-2 UKAI-CHO, FUCHU, HIROSHIMA 726-0002, JAPAN
TEL. 81-847-40-1600, FAX. 81-847-40-1601
RYOBI home page. http://www.ryobi-group.co.jp/
*1 There are some limitations to print thick paper depending on paper types.*2 Local conditions, ink, stock, and printing plate types, and printing quality required will affect the printing speed.*3 Type A. Weight does not include the peripheral devices of the press.
Number of Printing Units
Max. Paper size (W x L)
Min. Paper Size (W x L)
Max. Printing Area (W x L)
Paper Thickness*1
Plate Size
Printing Speed*2
Plate Thickness(Cylinder packing total)
Blanket Type
Feeding System
Feeder Pile Capacity /Delivery Pile Capacity
Diagonal Image Micro Adjustment Range
Vertical ImageMicro Adjustment Range
Vertical Image Rough Adjustment Range
Lateral Image Micro Adjustment Range
Infeed System
Number of Rollers
Gripper Margin
Oiling System
Electric Current
Power Consumption*3
Dimensions*3
Length
Width
Height
Weight*3
686 x 508 mm (27" x 20")
3,000 - 15,000 S.P.H (15,500 S.P.H is possible on special reguest.)
Standard: 650 x 550 mm (25.59" x 21.65") Max: 670 x 550 mm (26.38" x 21.65")
Blanket with aluminum bar, Size: 701 x 594 x 1.95 mm (27.60" x 23.39" x 0.077") [Cylinder packing total 2.35 mm (0.093")]
Rotary type stream feeder
0.4 mm (0.016")
800 mm (31.5") / 925 mm (36.42")
Underswing gripper and paper feed drum
Ink roller : 19 (form roller : 4 ) / unit Water roller : 4 (form roller : 1) / unit
10 – 1 mm (0.39" – 0.039")
– 0.2 mm (– 0.008") (plate cylinder)(at max. printing area)
682/684/685/686 : – 20 mm (– 0.79"), 682P/684P/685P/686P/688P/6810P : – 250 mm (– 9.84")
– 2.5 mm (– 0.098") (pull side guide), – 2 mm (– 0.079") (plate cylinder)
Automatic centralized oiling system
3-phase 200V 50/60Hz or other voltages
4 (4 / 0 . 2 / 2)2 (2 / 0 . 1 / 1) 5 (5 / 0 . 4 / 1)5 (5 / 0 . 3 / 2)
6 (6 / 0 . 5 / 1)6 (6 / 0 . 4 / 2)
10 (10 / 0 . 5 / 5)10 (10 / 0 . 6 / 4)
8 (8 / 0 . 4 / 4)
682/684/685/686: 279 x 200 mm (10.98" x 7.87"), 682P/684P/685P/686P/688P/6810P: Straight printing: 279 x 200 mm (10.98" x 7.87") Perfecting: 279 x 279 mm (10.98" x 10.98")
682/684/685/686: 660 x 495 mm (25.98" x 19.49"), 682P/684P/685P/686P/688P/6810P: Straight printing: 660 x 495 mm (25.98" x 19.49") Perfecting: 660 x 488 mm (25.98" x 19.21")
– 1 mm (– 0.039") (front lay), 682/684/685/686 : – 1 mm (– 0.039") (plate cylinder) 682P/684P/685P/686P/688P/6810P : – 2 mm (– 0.079") (plate cylinder)
682/684/685/686: 0.04 - 0.6 mm (0.0016" - 0.024"), 682P/684P/685P/686P/688P/6810P: Straight printing: 0.04 - 0.6 mm (0.0016" - 0.024") Perfecting: 0.04 - 0.4 mm (0.0016" - 0.016")
23kW/26kW
5,394 mm/5,757 mm(17’8"/18’11")
2,910 mm(9’7")
1,870 mm(6’2")
9.5 t / 10.5 t(20,950lbs / 23,150lbs)
31kW/35kW
7,166 mm/7,529 mm(23’6"/24’8")
2,910 mm(9’7")
1,870 mm(6’2")
17 t / 18 t(37,480lbs / 39,700lbs)
37kW/40kW
8,052 mm/8,415 mm(26’5"/27’7")
2,910 mm(9’7")
1,870 mm(6’2")
20.5 t / 21.5 t(45,200lbs / 47,400lbs)
63kW
11,073 mm(36’4")
3,241 mm(10’8")
1,870 mm(6’2")
31.5 t (69,500lbs)
72kW
12,845 mm(42’2")
3,380 mm(11’1")
1,870 mm(6’2")
38.5 t (84,900lbs)
43kW/46kW
8,938 mm/9,301 mm(29’4"/30’6")
2,910 mm(9’7")
1,870 mm(6’2")
24 t / 25 t(52,910lbs / 55,120lbs)
682 / 682P 684 / 684P 685 / 685P 686 / 686P 688P 6810P
Specifications