8/3/2019 Modelling a Lantern 02 - Lightwave 3D
1/32
Rendering The LanternBy Erik Brimstedt
Chapter 1 Basic Scene
Before we start texturing this Lantern we are going to create a very simple scene for it.This scene will contain of a single box with the polygons flipped inwards, which will act
like a room. Start the Lightwave Modeler and activate the Box Tool, then use thefollowing settings in the Numeric Panel.
Picture 131: The Box Tool settings
Close down the Numeric Panel and press Space to deselect the Tool. Flip the polygons bypressing f on your keyboard. The room is finished; all we need to do is apply a surfaceto it.
Press q to bring up the Change Surface Panel and create a new surface for this roomcalled Walls, just use the default settings and click OK. This is it for the modelling part,save this object now, you can call it Box.lwo.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
2/32
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
3/32
Okay, lets set the lights up, select the Light Item and open up the Item Properties Panel
by pressing p on your keyboard. Change the Properties of the Lightsource to thefollowing.
Picture 135: The Lightsource properties
Close down the Properties Panel when youre done. We need to move, rotate and scalethis Lightsource a bit to fit our scene, so with the Light still selected, activate the Move
Tool and use the following settings.
Picture 136: The First Lightsources Position
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
4/32
Before we continue, lets change some of the Display Options in Layout. Press d to bring
up the Display Options Panel, then use the following settings in the OpenGL section.
Picture 137: OpenGL settings
Were only using 1 OpenGL light for this scene; since we are adding a second Lightsourcelater on the OpenGL preview might get too bright.
Keep the Lightsource selected and activate the Rotate Tool, then use the followingsettings.
Picture 138: The First Lightsources Rotation
Once youve rotated the Light, press Enter twice to create a keyframe. Next activate
the Size Tool and use the following settings.
Picture 139: The First Lightsources Scaling
Once youre done, create that keyframe. Before we continue, lets save this scene as
Scenery.lws, just in case. With the Lightsource still select, select Add -> CloneCurrent Item to duplicate it, then activate the Move Tool and move this newLightsource to the following position.
Picture 140: The Second Lightsources Position
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
5/32
Once youve moved it, create a keyframe for it. Next activate the Rotate Tool and rotate
the second Lightsource using the following settings.
Picture 141: The Second Lightsources Rotation
And once again keyframe it once youre done. Since we cloned the first Lightsource we
dont need to scale it down, but we are going to change some of the properties for thissecond Lightsource. Open up the Properties Panel by pressing p, then use the followingsettings.
Picture 142: The Second Lightsource Properties
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
6/32
There were only 2 things you needed to change for the second Lightsource. The Light
Intensity should be 70% and the Shadow Type should be set to Off. Okay, now weredone with the Camera and the Lights, so lets take care of the Box Surface. Open up theSurface Editor and select the Walls Surface there. The Surface Preview will most likely
be a very bright white ball now, so lets change that first. Right click on the SurfacePreview window and a small menu should pop up. There should be an option there called
Use Scene Lights, and we dont need that one right now so turn it off.
The Surface for the Walls will not be very advanced at all, we are just going to add aprocedural texture in the diffuse channel to get some variation in the material, but firstlets change some of the basic settings. Use the following settings for the basic WallsSurface.
Picture 143: The Basic settings for the Wall surface
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
7/32
Click the T for the Diffuse Channel, then use the following procedural texture.
Picture 144: The Procedural Texture for the Diffuse Channel
Click Use Texture when youre done, and thats it for the Walls Surface. Our simpleBox Scene is done, but lets see what it looks like when rendered.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
8/32
Open up the Render Options Panel and set the Render Display to Image Viewer
FP, leave the rest to the default values and close down the panel. Now press F9 torender a test frame, the result should look something like picture 145.
Picture 145: A test render of the scene
Okay, save all the objects now to make sure the Surface attributes stays, then save thescene as well.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
9/32
Before we add the Lantern to this scene we are going to edit it a bit in the Modeler, so
start up the Modeler now and load in the Lantern Object. Open up the Surface Editor andselect the Metal Surface, for now we are going to give it a basic grey surface, so use thefollowing basic settings.
Picture 146: The Metal surface for now
Once youre done, close down the Surface Editor. Switch to Layer 9 and also switch toPolygon Mode. Later on in Layout we are going to make the main steel wire (the one thatis connected to the handles) rotate a bit, but to do this we need to put it in its own Layer.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
10/32
In the Bottom Right Viewport, click somewhere on this steel wire to select a few of its
polygons, like in picture 147.
Picture 147: A few polygons selected on the main steel wire
We want to select all the connected polygons to this steel wire, and theres a tool for this
purpose. Switch to the Display Tab and click on the Sel Connect button which you willfind in the Tools list to the left, like in picture 148.
Picture 148: Click the Sel Connect button
This should select all the polygons of this steel wire, so press x now to cut them out of
Layer 9, then switch to Layer 10 and paste it in there. Thats it, press s now to save the
changes, then close down Modeler and switch back to Layout.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
11/32
Load the Lantern into this scene now, once done it should look something like picture
149.
Picture 149: The Lantern added to the scene
First of all we are going to group all the Layers of this Lantern together, so that we canrotate all the parts simultaneously yet move them all at the same time. Select Add ->Objects -> Add Null and name this null Lantern_Null. Open up the Scene Editorand select all the Lantern Layers like in picture 150.
Picture 150: The Scene editor; select all the Lantern Layers
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
12/32
Once youve selected all the Layers, simply click and hold down your mouse button on
one of them, then drag them over the Lantern_Null object in the list to parent themto it. Picture 151 shows my Lantern Layers after they were parented.
Picture 151: The parented Lantern Layers
The Lantern_Null should now be on top of all the Lantern Layers, and you should seea small white arrow in the beginning of the Lantern_Null object in the list. This whitearrow indicates that objects are parented to it. If you click the white arrow all the LanternLayers should disappear, or hide within the Lantern_Null. This is it for the Scene
Editor; you can close it down now. Okay, lets rotate that steel wire a bit, so that it restsdownwards sort of. Make Layer 10 as Selected Item now, then select Pivot -> MovePivot Point Tool in the Tools list to the left of Layout. We want this steel wire to rotatearound where it is connected on the handles of the Lantern. Change the View of theLayout to Back and fit the Lantern in the Viewport using the Zoom and Pan Tools, sothat it looks something like picture 152.
Picture 152: Move the Pivot Point to where the steel wire is connected to the handles
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
13/32
So move the pivot point upwards now, and to make things a bit easier you can zoom in
on the section where the steel wire connects to the handles. Picture 153 shows a close upof my Pivot Point after I moved it.
Picture 153: Pivot Point Moved
Okay, keep Layer 10 as selected Item and activate the Rotate Tool, then use thefollowing settings for the rotation.
Picture 154: The Rotation for the steel wire (Layer 10)
Create a keyframe after youve rotated it.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
14/32
Open up the Render Options Panel and turn on Ray Trace Shadows, then make a test
render by pressing F9, it should look something like picture 155.
Picture 155: A test render at this point
Now lets rotate the whole Lantern a bit so that we see it more in-front sort of. Select the
Lantern_Null as the Selected Item, then activate the Rotate Tool and use thefollowing settings.
Picture 156: The Rotation for the Lantern_Null
Create a keyframe after youve rotated it.
Okay, were done with the basic scene for our Lantern, so select Save All Objects now
from the menu, and also save the scene file.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
15/32
Chapter 2 Surfacing
Alright, were going to create a shiny metal surface with a few flaws here and there forthis lantern. Most important when creating a metal surface is the surrounding area, i.e.
what will be reflected, and this simple scene weve built will create a very nice result onthat part. We will start out with the glass surface though, so well have that one ready
when we start out on the metal. Open up the Surface Panel and select the Glass surface,then use the following basic settings.
Picture 157: The Basic settings for the glass surface
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
16/32
Lets add some noise in some of the texture channels, click the T for the Specularity
Channel, then use the following settings.
Picture 158: The Procedural texture for the Specularity Channel
Click Use Texture once youre done, then continue with adding the following procedural inthe glossiness channel.
Picture 159: The Procedural texture for the Glossiness Channel
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
17/32
Click Use Texture once youre done. This glass material will reflect the surroundings as
well, but were going to tone down the reflectivity as the polygons of the glass turnsaway from the camera, know what I mean? We will do this by using a Gradient Map, soclick the T for the Reflection Channel now and use the following settings.
Picture 160: The Gradient map for the Reflection Channel
The Top Key should have the following settings:
Value: 100%Alpha: 100%
Parameter: 0.0
And the Lower Key should have the following settings:
Value: 100%
Alpha: 0%Parameter: 90
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
18/32
Thats it for the Glass Material, lets get on with the Glass_Solid surface now. The
Glass_Solid surface will be very simple. All this surface will do later on in the renderingprocess is to tell the light to stop bending as it has passed through the glass. Use thefollowing basic settings for the Glass_Solid Surface.
Picture 161: The Basic settings for the Glass_Solid surface
Thats it, were not going to do anything more to this surface.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
19/32
Switch to the Metal Surface and use the following basic settings.
Picture 162: The basic settings for the Metal surface
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
20/32
Close down the Surface panel for now, then open up the Properties Panel for the Camera
and set the Rendering Resolution to 800x600, thats what well use for test rendering.You can use more or less if you want to though. Also open up the Rendering OptionsPanel and use the following settings for now.
Picture 163: The Rendering Options
Now press F9 for a test render, it should look something like picture 164.
Picture 164: A test render
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
21/32
Open up the Surface Editor again and select the Metal surface, lets start adding some
textures in the channels. We are going to add quite many layers in the Colour Channel.Different textures in different colours to make small variations in the material. Click the Tfor the Colour Channel and use the following settings for the first layer.
Picture 165: First Layer in the Colour Channel
Add another Layer and use the following settings.
Picture 166: The Second Layer in the Colour Channel
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
22/32
Add another layer with the following settings.
Picture 167: The Third Layer in the Colour Channel
Add yet another Layer with the following settings.
Picture 168: The Fourth Layer in the Colour Channel
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
23/32
Add another Layer with the following settings.
Picture 169: The Fifth Layer in the Colour Channel
Okay, just one more and were done with the Colour Channel! Add another one with thefollowing settings
Picture 170: The Sixth and last Layer in the Colour Channel
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
24/32
Now, all these Layers will create variations in the colour for our material, a test render at
this point should look something like picture 171.
Picture 171: A new test render
Since the opacity of the layers we just added are all quite low, you wont notice much
difference, but thats just fine, we dont want heavy colour variations.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
25/32
Lets add some dark variations as well. Click the T for the Diffuse Channel and use the
following settings.
Picture 172: The texture for the Diffuse Channel
Thats it for the Diffuse Channel.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
26/32
Next were going to add some variations for the specularity. Click the T for the
Specularity Channel and use the following settings.
Picture 173: The Texture for the Specularity Channel
Thats it for the Specularity Channel, click Use Texture when youre done.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
27/32
Now, for the Reflection Channel we are going to use another Gradient Map. We are going
to use the same technique as with the glass earlier, where the polygons of the object willreflect less as they turn away from the camera. Click the T for the Reflection Channel anduse the following settings.
Picture 174: The Gradient Map for the Reflection Channel
The Top Key should have the following settings:
Value: 100%Alpha: 100%
Parameter: 0.0
And the Lower Key should have the following settings:
Value: 100%
Alpha: 0%Parameter: 90
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
28/32
Click Use Texture once youre done. A test render should look something like picture 175
at this point.
Picture 175: Another Test render
Note that the material will look dull until we choose to raytrace reflections. This will takesome more rendering time so Im keeping it turned OFF for now. Lets add some bumps
to this surface as well, so click the T for the Bump Channel and use the following settingsfor the first layer.
Picture 176: The first Bump Layer
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
29/32
Add another Layer and use the following settings.
Picture 177: The second Bump Layer
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
30/32
Add a third Layer and use the following settings.
Picture 178: The third and last Bump Layer
The last Layer we added here will create more drastic holes in the metal, as if the metal
was damaged. Thats pretty much it for the Metal surface, and our Lantern is now fullytextured and ready for some rendering.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
31/32
Open up the Properties Panel for the Camera and turn Anti Aliasing on, Im using
Enhanced Medium. Ill be rendering this in 1024x768 but you can choose whichresolution you want. Further on, in the Rendering Options Panel, use the followingsettings.
Picture 179: The Rendering Options
Also, make sure you choose to save the finished Render in the Output Files tab.
8/3/2019 Modelling a Lantern 02 - Lightwave 3D
32/32
Thats it, press F10 to start the rendering. This will take some time due the reflections inthis scene. I hope you enjoyed this Tutorial and I wish to thank you for reading it! Picture180 shows the Final Render!
Picture 180: The final render!