For technical support call 619-661-6477 (7am to 5pm PST) • 24 hour fax: 619-661-6466 • www.crower.com190
Crower Rods incorporate only the finest aircraft quality premium steel and titanium materials,heat treated to obtain that perfect balance of strength and durability.
Note: Titanium rods are available by replacing “B” with “T” before p/n
For titanium rods, replace “B” with “T” in front of p/n on all of rods listed on this page.Ex: T93089B-4
Note: To order the upgraded rod bolts (rated to 280,000 psi), refer to the rod bolt part numbers above and add the desired
bolt to the end of the rod number.Ex: B93089B-4 / 90845
DUCATIPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93095B-2B93078B-2B93079B-2
4.881"5.118"4.882"
996 Corsa900SS / 906 / 907
851 / 748 / 916
1.772"1.772"1.772"
.863"
.863"
.863"
.748" / 19mm
.748" / 19mm
.826" / 20mm
.865"
.865"
.860"
CUSTOM APPLICATIONSPart No. Engine DescriptionB93976B-4T93976B-4B93975B-2T93975B-2
4 cyl4 cyl2 cyl2 cyl
Steel Alloy - Any Desired Specifications Titanium - Any Desired Specifications
Steel Alloy - Any Desired Specifications Titanium - Any Desired Specifications
Proper bolt torque: Torque rod bolts to 10 ft lbs on both sides, then torque to proper spec with one pull.
Crower motorcycle connecting rods are available for most popular engines and come in your choice of I-Beam or H-Beam design. H-11 alloy 220,000 p.s.i. rod bolts come standard, 280,000 p.s.i. rod bolts upgrade available upon request.
ROD BOLTS
220,000280,000220,000280,000 280,000
90824-190845-190827-190842-1 90847-1
25 ft lbs30 ft lbs45 ft lbs60 ft lbs
275 in. lbs
Part No. Torque DimensionP.S.I.5⁄16 x 1.5005⁄16 x 1.5003⁄8 x 1.6003⁄8 x 1.600 1⁄4 x 1.375
Motorcycle Connecting Rods
KAWASAKIPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93072B-4B93091B-4B93073B-4B93076B-4B93096B-4
3.937"4.112"4.192"4.370"4.231"
ZXR750ZX9
ZX10 (04-up)ZX11ZX12
1.456"1.496"1.477"1.536"1.575"
.898"
.899"
.822"
.900"
.932"
.708" / 18mm
.708" / 18mm
.669" / 17mm
.708" / 18mm
.827" / 21mm
.710"
.710"
.630"
.900"
.750"
HONDAPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93094B-4B93090B-4B93098B-4
3.732"4.301"4.084"
CBR600 F3CBR1100XX Blackbird
CBR1000RR (04-up)
1.338"1.693"1.551"
.821"
.852"
.855"
.669" / 17mm
.748" / 19mm
.669" / 17mm
.600"
.710"
.630"
TRIUMPHPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93130B-2B93131B-2B93132B-3 B93930B-3
6.500"6.000"4.587"
Custom
650 Twin T120750 Twin T140Triple (95-up)
3Cyl
1.770"1.770"1.732"
Custom
1.041"1.041".875"
Custom
.687"
.750".748" / 19mm
Custom
1.000"1.000".875"
Custom
YAMAHAPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93120B-4B93121B-4B93122B-4B93123B-4B93124B-4B93125B-4B93126B-2B93127B-1B93128B-1B93129B-1
4.055"4.350"3.603"3.622"4.665"4.310"4.882"5.374"5.710"5.335"
R1 (04-up)YZF R1
R6 (01-03)YZF R6 (99-00)FJ 1100/1200
FZR 1000V-Max
XTZ 660 RaptorTT 500 / XT 500
XT 600
1.456"1.536"1.299"1.299"1.614"1.536"1.614"1.772"1.645"1.693"
.885"
.819"
.701"
.701"
.936"
.819"
.784"
.864"
.943"
.865"
.669" / 17mm
.669" / 17mm
.629" / 16mm
.629" / 16mm
.708" / 18mm
.748" / 19mm
.748" / 19mm
.866" / 22mm
.826" / 20mm
.866" / 22mm
.630"
.715"
.630"
.700"
.800"
.630"
.675"
.866"
.945"
.865"
SUZUKIPart No. C-to-C B.E. Bore P.E. BoreB.E. ThickEngine P.E. Thick
B93071B-4B93084B-4 B93087B-4B93086B-4B93088B-4B93089B-4
3.750"
4.060"4.370"4.606"4.704"
GSXR 600 (01-up)GSXR 1300 Hayabusa(2008)
GSXR 750 (00-up)GSXR 1000
GSXR 1100 (Watercool)GSXR 1300 Hayabusa
1.338"
1.417"1.496"1.614"1.614"
.786"
.786"
.786"
.826"
.826"
.590" / 15mm
.590" / 15mm
.629" / 16mm
.787" / 20mm
.787" / 20mm
.635"
.635"
.632"
.826"
.826"
Call for Specs. Call for Specs. Call for Specs.
Note: If using stretch method, Crower recommends .004" to .006".
For rod bushing specs. see pg. 197
Recommended
