MP-175 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
• Architectural (solid substrate) or structural (open framing) applica-tions.
• Integral snap-lock design provides continuous interlock at sidelap.
• Roof slopes as low as 3:12. Vertical walls and fascia systems.
• Continuous panel lengths. Field forming available.
• Panels expand and contract freely.
• ASTM E-1680-95 air infiltration tested.
• ASTM E-1646-95 water penetration tested.
• ASTM E-1592 tested for structural performance.
• UL90 uplift resistance classified assemblies.
• 35 year finish warranty.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
The MP-175 Panel is one of the industry’s most popular panel profile options. The snap lock seam
provides to the installer a faster installation without compromising seam integrity and strength. This
is due to the modest seam height and anti-siphoning design unlike that of other snap seam designs.
MATERIALS STANDARD WIDTHS OPTIONAL WIDTHS
24 ga. Steel 18” 12”, 14”, 15”, 16”
22 ga. Steel 18” 14”, 15”, 16”
.040 Aluminum 18” 12”, 16”
.032 Aluminum 18” 12”, 16”
20 oz. Copper 14” 12”, 18”
16 oz. Copper 14” 12”, 18”
NS-100 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The NS-100 Panel is a cost-effective concealed fastener panel with a continuous integral locking
seam that does not require the use of separate clips.
• An architectural panel installed over solid substrate.
• Integral snap-lock design provides continuous interlock at sidelap.
• Applicable for roof slopes as low as 3:12. May also be utilized in vertical wall and
fascia systems installations.
• Continuous panel lengths.
• Panels expand and contract freely.
• No clip required (fasteners only).
• Standard silicone-modified polyester finish (30 year warranty) available in 12
standard colors.
• Optional Kynar finish (35 year warranty) is available.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
MATERIAL STANDARD WIDTHS OPTIONAL WIDTHS
Siicone Modified Polyester Finish
26 ga. Steel 16" 12", 20"
Kynar Finish
24 ga. Steel 16" 12", 20"
.032" Aluminum 16" 12", 20"
Unfinished
26 ga. Galvalume 16" 12", 20"
24 ga. Galvalume 16" 12", 20"
16 oz. Copper 16" 12", 20"
MPS SL 150/100 SURE-LOK PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The Sure-Lok Panel has a traditional look with a time proven seam profile. This versatile panel al-
lows designers aesthetic flexibility without compromising the integrity of the roof system. From low
to steep slope, straight to curved, structural to architectural applications, the Sure-Lok Panel is the
perfect choice for a multifaceted project.
• Architecturally (solid substrate) or structural (open framing) applica-tions.
• Mechanically seamed sidelap with option of single or double lock.
• Low slope less than 3:12 available with optional in-seam sealant.
• Slopes down to 2:12.
• Continuous panel lengths. Field forming available.
• ASTM E-1680-95 air infiltration tested.
• ASTM E-1646-95 water penetration tested.
• ASTM E-1592 tested for structural performance.
• UL90 uplift resistance classified assemblies.
• Curving: Sure-Lok Panel can be curved to a minimum radius of 9’-0” in steel and 4’-0” in aluminum and copper.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
MATERIAL 1-1/2” SEAM HEIGHT
STANDARD / OPTIONAL
1” SEAM HEIGHT
STANDARD / OPTIONAL
24 ga. Steel 16” / Optional Widths Available 17” / Optional Widths Available
22 ga. Steel 16” / Optional Widths Available 17” / Optional Widths Available
.032” Aluminum 12” / Optional Widths Available 13” / Optional Widths Available
16 oz Copper 16” / Optional Widths Available 17” / Optional Widths Available
20 oz Copper 16” / Optional Widths Available 17” / Optional Widths Available
MP-200 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The MP-200 Panel is the preferred panel for low sloped and/or structural applications. This panel
has been designed and tested to meet the most demanding of performance requirements. Superior
wind uplift resistance can be achieved with the double lock seam profile.
• Architectural (solid substrate) or structural (open framing) applica-tions.
• Mechanically seamed sidelap with option of single or double lock.
• Low slope less than 3:12 available with optional in-seam sealant.
• Slopes down to 1/2:12.
• Concealed clip (fixed or expansion).
• ASTM E-1680-95 air infiltration tested.
• ASTM E-1646-95 water penetration tested.
• ASTM E-1592 tested for structural performance.
• UL 90 uplift resistance classified assemblies.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
MATERIAL STANDARD WIDTHS OPTIONAL WIDTHS
24 ga. Steel 18” 12”, 14”, 15”, 16”
22 ga. Steel 18” 12”, 14”, 15”, 16”
.032” Aluminum 18”
.040” Aluminum 18”
MP-100 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The MP-100 Panel is the ideal panel for complicated roof planes involving many hips and valleys.
The seam design allows panels to be installed in two directions from a center panel. This allows for
better roof symmetry and easier installation with less waste. The MP-100 Panel is ideal for curved
roofs; concave or convex.
• Architectural (solid substrate) applications.
• Separate snap-on seam allows panels to be installed in two directions.
• Application on 3:12 slopes and greater.
• Continuous panel lengths. Field forming available.
• Easy panel to install on complicated and multiple roof planes.
• Ideal for roof slope transitions or eave turn-downs.
• CURVING: MP-100 Panels can be installed over barrel style roofs (consult MPS for minimum radius requirements).
• Can be tapered for conical shaped roofs.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
MATERIAL STANDARD WIDTHS OPTIONAL WIDTHS
24 ga. Steel 14-1/2” 12”, 18-1/2”
22 ga. Steel 14-1/2” 12”, 18-1/2”
.032” Aluminum 14-1/2”
.040 Aluminum 14-1/2”
16 oz. Copper 13-1/2” 12”, 18-1/2”
MP-150 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The MP-150 Panel is ideal for complicated roofs planes involving many hips and valley’s, and the
taller seam height provides a bolder appearance. The seam design allows panels to be installed in
two directions from a center panel. This allows for roof symmetry and easier installation with less
waste. The panel is ideal for roofs with slope transitions.
• Architectural (solid substrate) applications.
• Separate snap-on seam allows panels to be installed in two direc-tions.
• Applications on 3:12 slopes and greater.
• Continuous panel lengths. Field forming available.
• Easy panel to install on complicated and multiple roof planes.
• Ideal for roof slope transitions.
• Surface patterns include smooth, striated, pencil ribs, and bead ribs.
MATERIAL STANDARD WIDTH OPTIONAL WIDTH
24 ga. Steel 13”, 17” 19”, 21”
22 ga. Steel 13”, 17”
.032” Aluminum 13”, 18-1/2”
.040” Aluminum 13”, 18-1/2”
FP-100 PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
The FP-100 Panel is for soffit, wall, and liner applications. It can be installed over solid substrate or
on open framing (36” o.c.). Ideal applications include vertical fascias, soffit, equipment screen, and
mansard walls. The FP-100 Panel is available with perforated vent strips for soffit vent application.
• Versatile panel for soffit, fascia, façade, and walls.
• Install over solid substrate or open framing (up to 36” o.c.).
• Available smooth or with pencil ribs.
• Venting: two rows of perforations for soffit venting.
• Panels expand and contract freely.
• Flush seam connections with hidden fasteners.
• Roll-formed to exact lengths.
• Standard finish is PVDF fluoropolymer coating in 30 standard colors (custom colors available).
• 35 Year finish warranty.
MATERIAL STANDARD WIDTHS OPTIONAL WIDTHS
24 ga. Steel 12” 16”, 18”
22 ga. Steel 12”
.032” Aluminum 12”
.040” Aluminum 12”
PREMIER PBR PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
Premier PBR Panel is a structural panel exposed fastener panel that can be used for both roof and
wall applications. The minimum roof slope for PBR is ½:12.
• Available in 26 and 24 gauge grade 50 Galvalume.
• SMP paint finish w/30 year warranty in 26 ga.
• Kynar 500 finish w/35 year warranty for 24 ga.
• 39” wide panel with 36” coverage.
• 1-1/4” overall thickness, 4 ribs @ 12” o.c. and two mi-nor ribs in-between.
• Lengths available in 1” increments, 2’-0” min. up to 40’-0” max.
• Weight per lineal foot: 26 ga. 3.08 lbs., 24 ga. 3.60 lbs.
• Max skid weight is 2000 lbs. (26 ga. 650 lf., 24 ga. 555 lf.).
PREMIER AG PANEL METAL PANEL SYSTEMS
For technical assistance call 513-554-6120 or visit our website at www.metalpanelsystems.com
Premier AG Panel is great for residential, light commercial, agricultural and storage buildings and also for
canopies. The Premier AG Panel should be installed over a solid, waterproofed deck when used as a roof
panel in a residential application. Great for exterior wall panels or interior ceilings and walls.
• Available in 29 or 26 gauge grade 50 Galvalume.
• SMP paint finish w/30 year warranty.
• Roof slopes as low as 3:12. Vertical walls and fascia sys-tems.
• 38” wide panel with 36” coverage.
• 3/4” overall thickness, 5 ribs @ 9” o.c. and two minor ribs in-between.
• Lengths available in 1” increments, 2’-0” minimum up to 40’-0” max.
• Weight per lineal foot: 29 ga 2.28 lbs., 26 ga. 3.08 lbs.
• Max skid weight is 2000 lbs. (29 ga. 877 lf., 26 ga. 650 lf.).