2
Introduction
BBrrooookk CCrroommppttoonnBrook Crompton is a leading manufacturer of electric
motors for the global industrial market.
Brook Crompton motors are used in almost every
industrial activity including water treatment, building
services, chemical/petrochemicals, general processing
and manufacturing. They drive fans, pumps, compressors
and conveyors.
Brook Crompton incorporates many well known names
including Brook Motors, Crompton Parkinson,
Electrodrives, Newman, Bull Electric and Hawker
Siddeley Electric Motors.
There are extensive stocks of motors around the world,
backed-up by a network of distributors, ensuring
excellent local support wherever needed.
QQuuaalliittyy aassssuurraanncceeStringent quality procedures are observed from first
design to finished product in accordance with the ISO9001
documented quality systems.
All factories have been assessed to meet these
requirements.
SSeerriieess 1100The Brook Crompton Series 10 range is a high quality
standard range of electric motors with a specification
suitable for most industrial applications.
It covers outputs from 0.06kW up to 900kW in frame sizes
56 to 450.
BBeenneeffiittss iinncclluuddee::• Full output range to meet your
requirements
• Efficiencies are within the IE1 & IE2 bands
(where applicable).
• Robust construction for long life
• Mountings: foot, flange, face or
combination
• Multi-mount - aluminium range
• Integrated feet cast iron 180 frame & above.
• Euro voltage: up to 3kW 230/400V; 4kW
and above 400/690V
• Dual frequency (50 / 60Hz)
• IP55
• Metal fan cover
• Metric entries
• Thermistors fitted as standard
• Inverter duty
MMEEPPSSTThhee nneeww ssttaannddaarrdd
The EU MEPS scheme sets new mmaannddaattoorryy minimum
efficiency levels for most single speed 3ph induction
motors up to 375kW rated up to 1000V, unlike the narrow
definition of the CEMEP voluntary scheme which only
covered a small number of standard motors.
The Voluntary Agreement, since 1998, of CEMEP for
motor manufactures is running out
(classes EFF3 /EFF2/EFF1).
The new standard for motors will be a mmaannddaattoorryy
regulation in Europe.
The scope of EU MEPS covers 2, 4 & 6 pole single speed
3ph induction motors from 0.75 to 375kW, rated up to
1000V based on continuous duty operation.
Aiming to reduce energy consumption throughout Europe
and the rest of the world, it comes into effect in 3 stages .
The effect of this is to maximise potential savings in
electric motor driven systems.
Base of the regulation is a new international IEC 60034-30
standard. It defines the following efficiency classes :
IIEE11 - Standard Efficiency (comparable to EFF2)
IIEE22 - High Efficiency (comparable to EFF1 and USA
EPACT 60 Hz)
IIEE33 - Premium Efficiency (comparable to USA “NEMA
Premium” 60 Hz)
NNeeww EEffffiicciieennccyy lleevveellss iinn EEuurrooppee ((TTiimmee LLiinnee))
Current situation:
Voluntary Agreement 2 and 4 pole,
1.1 to 90 kW Efficiencies: EFF3, EFF2, EFF1 (voluntary)
MMaannddaattoorryy ffrroomm::
From 16 June 2011:
Minimum efficiency requirement at IE2 for all motors
covered 0.75 - 375kW
From 1 January 2015:
Minimum efficiency requirement at IE3 level for ≥ 7.5 -375kW for stand alone motors, with a requirement at IE2
level for ≥ 7.5 - 375kW motors to be equipped with anappropriate variable speed drive.
From 1 January 2017:
Minimum efficiency requirement at IE3 level for ≥ 0.75 -375kW for stand alone motors, with a requirement at IE2
level for ≥ 0.75 - 375kW motors to be equipped with anappropriate variable speed drive.
3
Standards and enviroment
DDiirreeccttiivveess
SSttaannddaarrddss SSppeecciiffiiccaattiioonn
PPeerrffoorrmmaannccee IEC 60034-1
DDiimmeennssiioonnss IEC 60072-1
MMoouunnttiinngg IEC 60034-7
EEnncclloossuurree pprrootteeccttiioonn IEC 60034-5
VViibbrraattiioonn IEC 60034-14 (grade A)
NNooiissee IEC60034-9
SSttaannddaarrddss
FFrraammee mmaatteerriiaall
FFaann ccoovveerr
EEnncclloossuurree
VVoollttaaggee
FFrreeqquueennccyy
LLuubbrriiccaattiioonn
IInnssuullaattiioonn
TTeemmppeerraattuurree rriissee
PPaaiinntt ccoolloouurr
TThheerrmmiissttoorr pprrootteeccttiioonn
IInnvveerrtteerr DDuuttyy (with derate)
AAmmbbiieenntt tteemmppeerraattuurree
56 - 160 aluminium
180 -450 cast iron
steel
IP55
3 kW and below: 230 / 400
4 kW and above: 400 / 690
50 Hz
56 - 160 double-shielded bearings
180-450 through greasing
class F
class B
water blue (RAL 5021)
56 - 450
Variable Torque: 10:1
Constant Torque: 2:1
- 30°C to + 40°C
-
-
-
-
-
-
60 Hz
-
-
-
-
-
-
-
-
-
OptionStandard product
SSppeecciiffiiccaattiioonn
RReeffeerreennccee nnuummbbeerrss
MMoottoorr CCEE mmaarrkkeedd
SSttaannddaarrddss
DDooccuummeennttaattiioonn ffoorr ccuussttoommeerrss’’ tteecchhnniiccaall ffiillee
SSaaffeettyy iinnssttrruuccttiioonnss wwiitthh eevveerryy mmoottoorr
CCoommmmeenntt
CCoommpplliiaannccee wwiitthh EEuurrooppeeaann ddiirreeccttiivveess aappppllyyiinngg ttoo AACC iinndduuccttiioonn mmoottoorrss
73/23/EEC
93/68/EEC
2006/95/EC
Yes
EN 60034
Declaration of conformity
Yes
Relevant electrical equip-
ment operating between
50 to 1000 volts AC
DDiirreeccttiivveess Low voltage(LV)
2006/42/EC
98/79/EC
98/37/EC
93/44/EEC
89/392/EEC
No
Not applicable
Certificate of incorporation
Yes
Statement(2)
Machinery(MD)
89/336/EEC
92/31/EEC
93/68/EEC
2004/108/EC
No
EN 60034-1
Statement(1)
Yes
Component
Electromagnetic compatibility(EMC)
(1) Motors operating from a correctly applied, sinusoidal (AC) supply meet the requirements of the EMC directive and are within the limits specified in standard EN 60034-1(2) When installed in accordance with our customer safety and installation and maintenance instructions, they can be put into service only when the machinery into which they
are being incorporated, has been declared to be in conformity with the machinery directive in accordance with Article 4(2) and Annex IIB of that Directive (98/37/EEC)
Series 10 motors are manufactured to theinternational standards listed below:
EEnnvviirroonnmmeenntt EEnncclloossuurreeAll motors have degrees of IP protection
as defined in IEC EN 60034-5.
EEuurrooppeeaann ddiirreeccttiivveessThe following European directives apply:
MMoottoorr ccoooolliinnggMotors are cooled in accordance with
IEC 60034-6. The normal arrangement is IC411
(Totally Enclosed Fan Ventilated) via a fan
mounted at the non-drive end.
Alternative methods of cooling available on
request.
4
Performance data
3000 min-1 (2 pole)
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
355.0
400.0
450.0
500.0
560.0
630.0
710.0
800.0
900.0
2750
2750
2720
2720
2740
2740
2840
2840
2840
2840
2860
2880
2900
2900
2930
2930
2930
2940
2950
2950
2960
2965
2970
2970
2975
2975
2975
2975
2980
2980
2975
2975
2975
2982
2982
2892
2988
2986
2985
BB--DDAA5566MMAA
BB--DDAA5566MMBB
BB--DDAA6633MMAA
BB--DDAA6633MMBB
BB--DDAA7711MMAA
BB--DDAA7711MMBB
BB--DDAA8800MMAA
BB--DDAA8800MMBB
BB--DDAA9900SSAA
BB--DDAA9900LLAA
BB--DDAA110000LLAA
BB--DDAA111122MMAA
BB--DDAA113322SSAA
BB--DDAA113322SSBB
BB--DDAA116600MMAA
BB--DDAA116600MMBB
BB--DDAA116600LLAA
BB--DDFF118800MMAA
BB--DDFF220000LLAA
BB--DDFF220000LLBB
BBUU--DDFF222255MM
BBUU--DDFF225500MM
BBUU--DDFF228800SS
BBUU--DDFF228800MMAA
BBUU--DDFF331155SSAA
BBUU--DDFF331155MMAA
BBUU--DDFF331155LLAA
BBUU--DDFF331155LLBB
BBUU--DDFF335555MM
BBUU--DDFF335555LL
BBUU--DDFF335555LLBB
BBUU--DDFF335555LLCC
BBUU--DDFF335555LLDD
BBUU--DDFF440000LLAA
BBUU--DDFF440000LLBB
BBUU--DDFF440000LLCC
BBUU--DDFF445500LLAA
BBUU--DDFF445500LLBB
BBUU--DDFF445500LLCC
0.15
0.20
0.25
0.33
0.5
0.75
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
430
475
535
600
670
750
840
950
1080
1200
MAMN
IAIN
MKMN
Jkgm2
0.32
0.38
0.53
0.69
0.99
1.4
1.9
2.65
3.51
4.93
6.41
8.29
11.2
15.0
21.4
28.8
34.9
41.2
55.8
68.4
82.7
101
137
161
197
235
281
351
438
552
618
696
783
853
952
1072
1195
1340
1507
0.30
0.36
0.50
0.66
0.94
1.33
1.8
2.51
3.33
4.68
6.09
7.88
10.6
14.3
20.3
27.4
33.2
39.2
53.0
65.0
78.5
95.7
130
153
187
224
267
333
416
524
585
660
741
814
908
1019
1138
1276
1435
0.29
0.32
0.48
0.63
0.91
1.28
1.74
2.42
3.21
4.51
5.87
7.59
10.3
13.8
19.6
26.4
32.0
37.7
51.1
62.6
75.7
92.2
125
147
180
216
258
321
401
505
566
637
717
781
871
981
1092
1227
1380
62.0
67.0
65.0
68.0
70.0
73.0
72.1
75.0
77.2
79.7
81.5
83.1
84.7
86.0
87.6
88.7
89.3
89.9
90.7
91.2
91.7
92.1
92.7
93.0
93.3
93.5
93.8
94.0
94.0
94.0
95.9
95.9
96.0
96.3
96.3
96.3
96.6
96.7
96.7
2.1
2.1
2.2
2.2
2.2
2.2
2.3
2.4
2.3
2.4
2.4
2.3
2.2
2.3
2.2
2.3
2.4
2.3
2.2
2.3
2.3
2.1
2.3
2.2
2.2
2.3
2.2
2.2
2.2
2.2
1.23
1.64
1.47
1.20
0.98
1.38
1.20
1.20
1.20
5.2
5.2
5.5
5.5
6.1
6.1
6.1
6.3
6.5
6.8
6.9
7.0
7.2
6.9
6.8
7.0
7.0
6.9
7.1
7.1
6.8
6.8
7.1
7.1
7.1
6.9
7.0
7.0
7.0
7.0
5.80
7.11
6.42
6.14
5.46
7.29
7.00
7.00
7.00
2.2
2.2
2.3
2.3
2.3
2.3
2.4
2.4
2.3
2.5
2.4
2.4
2.3
2.4
2.3
2.3
2.5
2.3
2.3
2.4
2.5
2.2
2.3
2.4
2.3
2.4
2.3
2.3
2.3
2.3
2.53
2.03
2.72
2.90
2.57
3.42
2.00
2.00
2.00
0.00018
0.00023
0.00031
0.0006
0.00075
0.0009
0.0012
0.0014
0.0029
0.0055
0.0109
0.0126
0.0377
0.0499
0.055
0.075
0.124
0.075
0.124
0.139
0.233
0.312
0.579
0.675
1.18
1.82
2.08
2.38
3.0
3.5
12.52
13.26
14.21
20.07
20.07
27.1
27.6
28.1
28.1
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
0.70
0.72
0.80
0.81
0.81
0.82
0.83
0.84
0.84
0.85
0.87
0.88
0.88
0.88
0.89
0.89
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.91
0.91
0.91
0.92
0.92
0.92
0.92
0.91
0.91
0.91
0.92
0.92
0.93
0.94
0.94
0.94
0.31
0.41
0.61
0.96
1.26
1.88
2.52
3.7
5.0
7.4
10.0
13.3
18.1
24.7
35.9
48.9
60.3
71.5
97.1
119.8
145.2
177.2
241.2
289.4
353.1
423.7
513.6
642
801.2
1009
1281
1440
1681
1790
2016
2270
2269
2666
2879
Full load
torque
MNNm
MSMN
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Direct on line
pull up torque
LPAdB(A)
-
-
-
-
-
-
56
56
61
62
64
65
68
68
73
73
73
75
78
78
78
79
80
80
82
82
85
86
88
89
-
-
-
-
-
-
-
-
-
Mean Sound pressure
level @ 1m on no load
IE1 efficiency 0.75 to 375kW
IIEE11
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
kg
Weight
kg
3.6
3.9
4.8
5.1
6.0
6.5
8.7
9.5
11.8
13.5
21.0
28.0
39.0
44.5
69.5
78.0
88.5
165
218
230
280
365
495
565
890
980
1055
1110
1900
2300
2604
3035
3122
3340
3340
4020
4200
4400
4650
Weight
5
Performance data
1500 min-1 (4 pole)
0.06
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
355.0
400.0
450.0
500.0
560.0
630.0
710.0
800.0
900.0
1325
1325
1310
1310
1330
1330
1390
1390
1390
1390
1390
1410
1410
1435
1440
1440
1460
1460
1470
1470
1470
1475
1475
1480
1480
1480
1480
1480
1480
1490
1490
1485
1485
1485
1492
1492
1492
1492
1492
1492
BB--DDAA5566MMAA
BB--DDAA5566MMBB
BB--DDAA6633MMAA
BB--DDAA6633MMBB
BB--DDAA7711MMAA
BB--DDAA7711MMBB
BB--DDAA8800MMAA
BB--DDAA8800MMBB
BB--DDAA9900SSAA
BB--DDAA9900LLAA
BB--DDAA110000LLAA
BB--DDAA110000LLBB
BB--DDAA111122MMAA
BB--DDAA113322SSAA
BB--DDAA113322MMAA
BB--DDAA116600MMAA
BB--DDAA116600LLAA
BB--DDFF118800MMAA
BB--DDFF118800LLAA
BB--DDFF220000LL
BB--DDFF225555SS
BBUU--DDFF222255MM
BBUU--DDFF225500MMAA
BBUU--DDFF228800SS
BBUU--DDFF228800MMAA
BBUU--DDFF331155SS
BBUU--DDFF331155MM
BBUU--DDFF331155LLAA
BBUU--DDFF331155LLBB
BBUU--DDFF335555MM
BBUU--DDFF335555LL
BBUU--DDFF335555LLBB
BBUU--DDFF335555LLCC
BBUU--DDFF335555LLDD
BBUU--DDFF440000LLAA
BBUU--DDFF440000LLBB
BBUU--DDFF440000LLCC
BBUU--DDFF445500LLAA
BBUU--DDFF445500LLBB
BBUU--DDFF445500LLCC
0.08
0.12
0.16
0.25
0.33
0.5
0.75
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
430
475
535
600
670
750
840
950
1070
1200
0.28
0.39
0.44
0.62
0.79
1.12
1.57
2.08
2.89
3.73
5.17
6.81
8.91
11.9
15.7
22.7
30.2
36.4
43.1
58.4
70.8
85.7
104
141
169
203
243
291
363
449
565
636
716
797
869
971
1092
1222
1373
1571
0.27
0.37
0.42
0.59
0.75
1.06
1.49
1.97
2.74
3.55
4.91
6.47
8.46
11.3
15.0
21.6
28.7
34.5
41.0
55.5
67.2
81.4
98.9
134
160
193
231
276
345
426
537
604
680
757
831
924
1043
1164
1308
1496
0.26
0.35
0.41
0.57
0.72
1.02
1.43
1.90
2.64
3.42
4.74
6.24
8.16
10.9
14.4
20.8
27.8
33.3
39.5
53.4
64.8
78.5
95.3
129
154
186
223
266
332
411
517
582
655
729
795
889
1000
1119
1257
1438
56.0
58.0
57.0
60.0
65.0
67.0
71.1
72.1
75.0
77.2
79.7
81.5
83.1
84.7
86.0
87.6
88.7
89.3
89.9
90.7
91.2
91.7
92.1
92.7
93.0
93.3
93.5
93.8
94.0
94.0
94.0
96.4
96.4
96.4
96.4
96.4
96.4
96.4
96.6
96.6
2.0
2.0
2.1
2.1
2.1
2.1
2.3
2.3
2.3
2.4
2.3
2.5
2.4
2.3
2.3
2.2
2.2
2.2
2.2
2.3
2.2
2.3
2.1
2.2
2.1
2.2
2.1
2.1
2.1
2.2
2.1
1.93
1.80
1.80
1.83
2.02
1.75
1.30
1.53
1.75
4.0
4.0
4.4
4.4
5.2
5.2
5.2
6.1
6.3
6.1
6.5
6.5
7.0
7.0
7.0
6.5
7.2
7.5
7.2
7.1
7.1
6.9
6.8
7.5
7.2
6.9
6.9
6.7
6.9
6.9
6.9
6.50
6.50
6.50
6.19
6.64
5.81
6.17
6.91
5.81
2.1
2.1
2.2
2.2
2.2
2.2
2.3
2.3
2.4
2.4
2.4
2.5
2.4
2.4
2.3
2.3
2.2
2.3
2.3
2.4
2.2
2.3
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.6
2.6
2.6
2.52
2.67
2.34
2.57
2.28
2.34
0.0003
0.0004
0.0005
0.0006
0.0008
0.0013
0.0018
0.0021
0.0023
0.0027
0.0054
0.0067
0.0095
0.0214
0.0296
0.0747
0.0918
0.139
0.158
0.262
0.406
0.469
0.66
1.12
1.46
3.11
3.62
4.13
4.73
6.5
8.2
9.5
10.6
11.5
18.41
19.62
21.33
41.00
49.50
49.50
0.58
0.61
0.72
0.73
0.74
0.75
0.75
0.76
0.77
0.79
0.81
0.82
0.82
0.83
0.84
0.84
0.85
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0.87
0.88
0.88
0.89
0.89
0.90
0.90
0.88
0.88
0.89
0.90
0.90
0.91
0.91
0.93
0.92
0.43
0.64
0.84
1.26
1.73
2.56
3.75
5.15
7.56
10.3
15.1
20.3
27.1
36.6
49.7
72.9
98.1
121
143
195
240
291
356
484
581
710
852
1032
1291
1602
2019
2283
2572
2894
3203
3587
4035
4530
5100
5740
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
47
49
49
52
52
53
59
59
62
63
64
64
66
68
68
70
72
73
80
80
84
84
88
88
-
-
-
-
-
-
-
-
-
IE1 efficiency 0.75 to 375kW
IIEE11
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
3.6
3.9
4.8
5.1
6.0
6.3
9.4
10.8
12.0
13.8
20.8
23.5
29.5
41.0
47.5
72.5
85.6
164
182
245
258
290
388
510
606
910
1000
1055
1128
1700
1900
2150
2300
2460
3132
3548
3589
4055
4724
4732
6
Performance data
1000 min-1 (6 pole)
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
355.0
400.0
450.0
500.0
560.0
630.0
710.0
800.0
840
850
850
850
885
885
910
910
920
935
960
960
960
970
970
970
980
980
980
980
980
980
985
985
985
985
985
985
985
990
990
990
994
994
994
994
994
994
BB--DDAA6633MMAA
BB--DDAA6633MMBB
BB--DDAA7711MMAA
BB--DDAA7711MMBB
BB--DDAA8800MMAA
BB--DDAA8800MMBB
BB--DDAA9900SSAA
BB--DDAA9900LLAA
BB--DDAA110000LLAA
BB--DDAA111122MMAA
BB--DDAA113322SSAA
BB--DDAA113322MMAA
BB--DDAA113322MMBB
BB--DDAA116600MMAA
BB--DDAA116600LLAA
BB--DDFF118800LLAA
BB--DDFF220000LLAA
BB--DDFF220000LLBB
BBUU--DDFF222255MM
BBUU--DDFF225500MM
BBUU--DDFF228800SS
BBUU--DDFF228800MMAA
BBUU--DDFF331155SSAA
BBUU--DDFF331155MMAA
BBUU--DDFF331155LLAA
BBUU--DDFF331155LLBB
BBUU--DDFF335555MMAA
BBUU--DDFF335555MMBB
BBUU--DDFF335555LL
BBUU--DDAA335555LLAA
BBUU--DDFF335555LLBB
BBUU--DDFF440000LLAA
BBUU--DDFF440000LLBB
BBUU--DDFF440000LLCC
BBUU--DDFF445500MMBB
BBUU--DDFF445500LLAA
BBUU--DDFF445500LLBB
BBUU--DDFF445500LLCC
0.15
0.20
0.25
0.33
0.5
0.75
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
420
480
544
612
680
760
850
960
1080
0.52
0.63
0.74
0.95
1.30
1.78
2.26
3.14
4.04
5.65
7.52
9.80
13.1
17.4
22.2
32.0
39.1
45.1
60.1
71.9
86.8
106
143
171
208
246
295
367
459
590
663
730
819
908
918
1152
1297
1450
0.49
0.60
0.70
0.90
1.23
1.69
2.15
2.98
3.83
5.36
7.14
9.31
12.4
16.6
21.1
30.4
37.2
42.8
57.1
68.3
82.5
100
136
162
197
234
280
349
436
557
628
701
783
871
874
1097
1235
1381
0.47
0.58
0.68
0.87
1.19
1.63
2.07
2.87
3.70
5.17
6.88
8.97
12.0
16.0
20.3
29.3
35.8
41.3
55.0
65.8
79.5
96.7
131
156
190
226
270
336
420
540
607
668
750
831
840
1055
1187
1327
44.0
48.0
56.0
59.0
62.0
65.0
70.0
72.9
75.2
77.7
79.7
81.4
83.1
84.7
86.4
87.7
88.6
89.2
90.2
90.8
91.4
91.9
92.6
92.9
93.3
93.5
93.8
94.0
94.0
95.5
95.7
95.9
95.9
96.1
96.0
96.1
95.9
96.5
1.8
1.8
1.9
1.9
1.9
1.9
2.1
2.0
2.0
2.2
2.0
2.0
2.2
2.0
2.2
2.1
2.2
2.1
2.1
2.1
2.0
2.1
2.1
2.0
2.0
2.0
1.9
1.9
1.9
2.10
2.10
2.08
2.07
1.86
1.64
1.65
1.71
1.52
3.5
3.5
4.0
4.0
4.7
4.7
5.5
5.5
6.0
6.0
6.5
6.5
6.5
6.7
6.7
6.7
6.7
6.7
7.0
7.0
7.0
7.0
7.0
6.7
6.7
6.7
6.7
6.7
6.7
6.50
6.50
6.38
6.31
5.72
5.99
5.99
6.13
5.47
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.0
2.2
2.1
2.1
2.2
2.1
2.3
2.2
2.2
2.2
2.1
2.2
2.1
2.2
2.2
2.1
2.1
2.1
2.0
2.0
2.0
2.40
2.40
2.48
2.43
2.19
2.32
2.30
2.33
2.06
0.00025
0.0004
0.0011
0.0014
0.0016
0.0019
0.0029
0.0035
0.0069
0.014
0.0286
0.0357
0.0449
0.081
0.116
0.207
0.315
0.36
0.547
0.843
1.39
1.65
4.11
4.78
5.45
6.12
9.5
10.4
12.4
13.5
14.3
21.86
22.31
23.52
54.10
60.60
67.90
67.90
0.60
0.60
0.66
0.68
0.70
0.72
0.7
0.73
0.75
0.76
0.76
0.76
0.77
0.77
0.78
0.81
0.81
0.83
0.84
0.86
0.86
0.86
0.86
0.86
0.86
0.87
0.88
0.88
0.88
0.85
0.85
0.86
0.86
0.86
0.86
0.86
0.86
0.87
1.02
1.35
2.02
2.80
3.99
5.94
7.8
11.5
15.6
22.5
29.8
39.8
54.7
73.8
108.3
147.7
180.3
214.4
292.3
360.6
438.5
536
727
873
1066
1280
1551
1939
2424
3039
3425
3843
4323
4804
4785
6025
6790
7680
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
45
45
49
53
57
57
57
61
61
61
64
64
64
66
68
68
73
73
73
73
80
80
80
-
-
-
-
-
-
-
-
-
IE1 efficiency 0.75 to 375kW
IIEE11
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
4.8
5.1
6.0
6.3
8.9
10.4
12.1
13.7
23.0
28.2
40.3
43.0
47.2
70.6
85.0
178
200
228
265
370
490
540
900
980
1045
1100
1550
1600
1700
2310
2490
3560
3840
3870
4200
4620
5080
5080
7
Performance data
750 min-1 (8 pole)
0.09
0.12
0.18
0.25
0.37
0.55
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
355.0
400.0
450.0
500.0
600
600
645
645
670
670
680
680
690
705
705
720
720
720
730
730
730
730
735
735
735
735
735
735
735
740
740
740
740
740
745
745
745
745
BB--DDAA7711MMAA
BB--DDAA7711MMBB
BB--DDAA8800MMAA
BB--DDAA8800MMBB
BB--DDAA9900SS
BB--DDAA9900LLAA
BB--DDAA110000LLAA
BB--DDAA110000LLBB
BB--DDAA111122MMAA
BB--DDAA113322SS
BB--DDAA113322MM
BB--DDAA116600MMAA
BB--DDAA116600MMBB
BB--DDAA116600LL
BB--DDFF118800LL
BB--DDFF220000LL
BBUU--DDFF222255SS
BBUU--DDFF222255MM
BBUU--DDFF225500MM
BBUU--DDFF228800SS
BBUU--DDFF228800MM
BBUU--DDFF331155SSAA
BBUU--DDFF331155MMAA
BBUU--DDFF331155LLAA
BBUU--DDFF331155LLBB
BBUU--DDFF335555MMAA
BBUU--DDFF335555MMBB
BBUU--DDFF335555LL
BBUU--DDFF335555LLBB
BBUU--DDFF335555LLCC
BBUU--DDFF440000LLBB
BBUU--DDFF440000LLCC
BBUU--DDFF445500LLBB
BBUU--DDFF445500LLCC
0.15
0.20
0.25
0.33
0.5
0.75
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
340
420
480
540
600
675
0.60
0.71
0.88
1.15
1.49
2.17
2.40
3.32
4.40
6.04
7.9
10.3
13.6
17.8
25.1
34.1
41.1
47.4
63.4
77.8
94.1
111
151
178
217
261
315
387
511
642
667
750
858
959
0.57
0.70
0.84
1.10
1.41
2.07
2.28
3.15
4.18
5.73
7.51
9.76
12.9
16.9
23.9
32.4
39
45
60.2
73.9
89.4
106
144
169
206
248
299
368
485
610
641
723
817
913
0.55
0.65
0.80
1.06
1.4
1.99
2.2
3.04
4.0
5.5
7.2
9.4
12.5
16.3
23
31.2
37.6
43.4
58.1
71.2
86.1
102
139
163
199
239
288
355
468
588
610
687
785
878
40.0
45.0
51.0
54.0
62.0
63.0
71.0
73.0
75.0
78.0
79.0
81.0
83.0
85.5
87.5
88.0
90.0
90.5
91.0
91.5
92.0
92.8
93.0
93.8
94.0
93.7
94.2
94.5
95.3
95.5
95.6
95.6
95.7
95.7
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.9
2.0
2.0
2.0
2.0
1.9
1.9
1.9
1.9
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.80
1.80
1.72
1.96
1.62
1.74
2.8
2.8
3.3
3.0
4.0
4.0
4.0
5.0
5.0
6.0
6.0
6.0
6.0
6.0
6.0
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.6
6.4
6.4
6.4
6.4
6.5
6.5
5.84
6.39
5.43
5.65
1.9
1.9
1.9
1.9
1.9
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.25
2.44
2.18
2.23
0.0008
0.0010
0.0025
0.0030
0.0051
0.0065
0.0095
0.0110
0.0245
0.0314
0.0395
0.0753
0.0931
0.1260
0.203
0.399
0.491
0.547
0.834
1.93
3.65
4.79
5.58
6.37
7.23
7.9
10.3
12.3
14.53
15.39
29.76
31.34
75.20
79.30
0.57
0.57
0.61
0.61
0.61
0.61
0.67
0.69
0.69
0.71
0.73
0.73
0.74
0.75
0.76
0.76
0.76
0.78
0.79
0.79
0.79
0.81
0.81
0.82
0.82
0.82
0.82
0.83
0.78
0.78
0.85
0.85
0.83
0.83
1.3
2.16
2.5
3.5
5.1
7.6
10.2
15.0
20.5
19.6
40.4
53.1
72.6
99.5
143.9
196.2
242.0
287.8
382.5
484.0
580.7
709.8
967.9
1161.5
1419.6
1692.1
2051.0
2563.4
3226
4065
4557
5128
5740
6675
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
48
48
48
48
53
53
56
56
59
61
61
65
65
65
70
73
73
73
75
76
76
82
82
82
82
90
90
90
-
-
-
-
-
-
IIEE11
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
6.0
6.3
8.9
10.4
12.1
13.7
23.0
25.1
28.2
40.3
45.0
68.5
76.0
86.2
160
228
242
265
368
472
538
900
1000
1055
1118
2000
2150
2250
2460
2750
3592
3949
4660
4870
8
Performance data
3000 min-1 (2 pole)
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
2875
2875
2890
2890
2891
2914
2937
2940
2930
2930
2937
2940
2950
2950
2960
2965
2970
2970
2975
2975
2975
2975
2980
2980
AA--DDAA8800MMAA
AA--DDAA8800MMBB
AA--DDAA9900SSAA
AA--DDAA9900LLAA
AA--DDAA110000LLAA
AA--DDAA111122MMAA
AA--DDAA113322SSAA
AA--DDAA113322SSBB
AA--DDAA116600MMAA
AA--DDAA116600MMBB
AA--DDAA116600LLAA
AA--DDFF118800MMAA
AA--DDFF220000LLAA
AA--DDFF220000LLBB
AAUU--DDFF222255MM
AAUU--DDFF225500MM
AAUU--DDFF228800SS
AAUU--DDFF228800MMAA
AAUU--DDFF331155SSAA
AAUU--DDFF331155MMAA
AAUU--DDFF331155LLAA
AAUU--DDFF331155LLBB
AAUU--DDFF335555MM
AAUU--DDFF335555LL
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
430
1.77
2.50
3.32
4.72
6.17
8.04
11.2
14.6
21.0
28.4
34.7
41.6
56.2
68.2
82.5
99.5
135
160
194
233
278
348
434
547
1.68
2.37
3.16
4.48
5.86
7.64
10.6
13.9
19.9
26.9
33.0
39.5
53.4
64.8
78.4
94.5
128
152
185
221
265
330
412
520
1.62
2.29
3.04
4.32
5.65
7.36
10.2
13.4
19.2
26.0
31.8
38.1
51.5
62.5
75.6
91.1
123
146
178
213
255
318
398
501
77.4
79.6
81.3
83.2
84.6
85.8
87.0
88.1
89.4
90.3
90.9
91.3
92.0
92.5
92.9
93.2
93.8
94.1
94.3
94.6
94.8
95.0
95.0
95.0
2.5
3.2
2.7
2.4
3.2
2.5
2.7
2.4
2.2
2.3
2.3
2.8
2.6
2.6
2.4
2.3
2.5
2.8
2.4
2.6
2.5
2.5
2.5
2.5
5.3
7.0
7.1
6.9
8.0
7.5
7.5
7.5
7.6
7.6
7.4
7.8
7.8
7.7
7.5
7.1
7.4
7.6
6.9
7.1
7.1
6.9
7.0
7.0
3.0
3.8
3.5
3.0
4.0
3.0
3.5
3.3
2.9
3.0
3.1
3.2
3.0
3.0
2.6
2.8
2.8
2.8
2.8
2.9
2.9
2.8
2.8
2.9
0.0012
0.0014
0.0029
0.0055
0.0109
0.0126
0.0377
0.0499
0.055
0.075
0.124
0.075
0.124
0.139
0.233
0.312
0.579
0.675
1.18
1.82
2.08
2.38
3.0
3.5
0.83
0.84
0.84
0.85
0.87
0.88
0.86
0.88
0.89
0.89
0.89
0.88
0.88
0.89
0.89
0.90
0.90
0.91
0.91
0.91
0.92
0.92
0.92
0.92
2.49
3.65
4.96
7.27
9.91
13.1
17.9
24.4
35.9
48.9
60.2
71.5
97.1
119.8
145.2
177.2
241.2
289.4
353.1
423.7
513.6
642
801.2
1009
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
56
57
61
61
63
65
68
68
72
73
73
74
77
77
77
80
80
80
81
81
85
85
88
88
IE2 efficiency 0.75 to 375kW
IIEE22
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
12.0
13.5
17.5
22.0
29.0
32.0
47.5
53.0
96.0
105
115
187
241
261
348
400
540
588
948
1009
1111
1142
1938
2346
9
Performance data
1500 min-1 (4 pole)
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
315.0
1390
1390
1390
1390
1410
1410
1435
1440
1440
1460
1470
1470
1470
1480
1480
1480
1480
1480
1485
1485
1485
1485
1490
1490
AA--DDAA8800MMBB
AA--DDAA9900SSAA
AA--DDAA9900LLAA
AA--DDAA110000LLAA
AA--DDAA110000LLBB
AA--DDAA111122MMAA
AA--DDAA113322SSAA
AA--DDAA113322MMAA
AA--DDAA116600MMAA
AA--DDAA116600LLAA
AA--DDFF118800MMAA
AA--DDFF118800LLAA
AA--DDFF220000LL
AA--DDFF225555SS
AAUU--DDFF222255MM
AAUU--DDFF225500MMAA
AAUU--DDFF228800SS
AAUU--DDFF228800MMAA
AAUU--DDFF331155SS
AAUU--DDFF331155MM
AAUU--DDFF331155LLAA
AAUU--DDFF331155LLBB
AAUU--DDFF335555MM
AAUU--DDFF335555LL
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
430
1.88
2.66
3.57
4.88
6.50
8.55
11.5
15.3
22.1
29.6
35.8
42.3
57.3
69.7
84.3
103
139
167
201
240
288
359
443
559
1.78
2.53
3.39
4.64
6.18
8.12
10.9
14.5
21.0
28.1
34.0
40.2
54.4
66.2
80.1
97.5
132
158
191
228
273
341
421
531
1.72
2.44
3.27
4.47
5.95
7.83
10.5
14.0
20.3
27.1
32.8
38.8
52.5
63.8
77.2
94.0
127
153
184
220
263
328
406
511
79.6
81.4
82.8
84.3
85.5
86.6
87.7
88.7
89.8
90.6
91.2
91.6
92.3
92.7
93.1
93.5
94.0
94.2
94.5
94.7
94.9
95.1
95.1
95.1
2.4
3.0
3.2
3.0
2.6
3.5
2.2
2.4
2.5
2.5
2.6
2.6
2.4
2.5
2.5
2.6
2.7
2.7
2.7
2.7
3.0
3.0
2.8
2.6
5.0
6.0
6.8
7.0
7.0
7.5
6.4
7.0
6.9
7.5
7.8
7.5
7.1
7.5
7.6
7.3
7.6
7.5
7.1
7.3
7.4
7.6
7.5
7.4
2.9
3.5
3.8
3.5
3.3
4.0
2.8
3.0
2.9
3.0
3.1
3.1
2.9
2.7
2.8
2.7
2.7
2.7
2.9
2.9
3.0
3.0
2.9
2.8
0.0021
0.0023
0.0027
0.0054
0.0067
0.0095
0.0214
0.0296
0.0747
0.0918
0.139
0.158
0.262
0.406
0.469
0.66
1.12
1.46
3.11
3.62
4.13
4.73
6.5
8.2
0.76
0.77
0.77
0.81
0.82
0.82
0.83
0.84
0.84
0.85
0.86
0.86
0.86
0.87
0.87
0.87
0.87
0.87
0.88
0.88
0.89
0.89
0.90
0.90
5.12
7.3
9.9
14.6
19.9
26.4
36.1
49.2
71.9
98.1
120
143
195
239
291
355
484
581
707
849
1029
1286
1602
2019
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
46
48
48
52
52
53
59
59
62
62
64
64
64
64
65
66
69
69
77
77
82
82
84
84
IE2 efficiency 0.75 to 375kW
IIEE22
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
14.5
18.5
21.0
31.0
37.0
42.0
52.5
64.0
99.0
114
185
200
270
310
340
413
530
630
950
1037
1107
1225
1734
1940
10
Performance data
1000 min-1 (6 pole)
0.75
1.1
1.5
2.2
3.0
4.0
5.5
7.5
11.0
15.0
18.5
22.0
30.0
37.0
45.0
55.0
75.0
90.0
110.0
132.0
160.0
200.0
250.0
934
945
945
960
964
965
965
970
970
975
980
980
980
980
980
980
985
985
985
985
990
990
990
AA--DDAA9900SSAA
AA--DDAA9900LLAA
AA--DDAA110000LLAA
AA--DDAA111122MMAA
AA--DDAA113322SSAA
AA--DDAA113322MMAA
AA--DDAA113322MMBB
AA--DDAA116600MMAA
AA--DDAA116600LLAA
AA--DDFF118800LLAA
AA--DDFF220000LLAA
AA--DDFF220000LLBB
AAUU--DDFF222255MM
AAUU--DDFF225500MM
AAUU--DDFF228800SS
AAUU--DDFF228800MMAA
AAUU--DDFF331155SSAA
AAUU--DDFF331155MMAA
AAUU--DDFF331155LLAA
AAUU--DDFF331155LLBB
AAUU--DDFF335555MMAA
AAUU--DDFF335555MMBB
AAUU--DDFF335555LL
1.0
1.5
2.0
3.0
4.0
5.5
7.5
10
15
20
25
30
40
50
60
75
100
125
150
175
215
270
335
2.08
2.97
3.80
5.37
7.19
9.43
12.6
16.7
24.1
31.4
38.3
44.3
59.2
70.8
85.8
104
141
169
206
243
291
363
454
1.98
2.82
3.61
5.10
6.83
8.96
12.0
15.9
22.9
29.8
36.4
42.0
56.2
67.3
81.5
99.2
134
160
196
231
277
345
432
1.90
2.72
3.48
4.92
6.58
8.63
11.5
15.3
22.1
28.7
35.1
40.5
54.2
64.8
78.5
95.6
129
155
189
223
267
333
416
75.9
78.1
79.8
81.8
83.3
84.6
86.0
87.2
88.7
89.7
90.4
90.9
91.7
92.2
92.7
93.1
93.7
94.0
94.3
94.6
94.8
95.0
95.0
2.2
2.4
1.8
2.3
1.8
2.3
1.9
2.0
2.4
2.0
2.3
2.3
2.2
2.5
2.2
2.4
2.8
2.7
2.9
3.0
3.1
3.0
3.1
4.5
4.5
4.2
4.5
4.5
5.0
5.5
6.5
7.5
6.4
7.0
7.0
6.5
6.9
7.0
7.1
7.3
7.1
7.4
7.6
7.6
7.8
7.7
2.4
2.6
2.2
2.8
2.4
2.7
2.8
3.0
3.3
2.7
3.0
2.8
2.7
2.7
2.4
2.5
3.0
2.9
2.9
3.1
3.1
3.0
3.0
0.0029
0.0035
0.0069
0.014
0.0286
0.0357
0.0449
0.081
0.116
0.207
0.315
0.36
0.547
0.843
1.39
1.65
4.11
4.78
5.45
6.12
9.5
10.4
12.4
0.72
0.72
0.75
0.76
0.76
0.76
0.77
0.78
0.78
0.81
0.81
0.83
0.84
0.86
0.86
0.86
0.86
0.86
0.86
0.87
0.88
0.88
0.88
7.67
11.1
15.2
21.9
29.7
39.6
54.4
73.8
108.3
147
180
214
292
361
439
536
727
873
1066
1280
1543
1929
2412
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
45
45
49
53
53
55
55
57
57
58
58
61
62
62
63
64
68
68
73
73
78
78
78
IE2 efficiency 0.75 to 375kW
IIEE22
kW hp
PN
nmin–1
380 VA
400 VA
415 VA
h1.0 PN
MAMN
IAIN
MKMN
Jkgm2
IN
Rotor inertia WK2
Direct on line
pull out torque
Direct on line
starting current ratio
Direct on line
starting torque ratio
Power factor
Efficiency
Full load current at
rated voltage
Frame reference
and size
Full load speed in
revolutions per minute
Rated power
TypeCos Ø1.0 PN
Full load
torque
MNNm
MSMN
Direct on line
pull up torque
LPAdB(A)
Mean Sound pressure
level @ 1m on no load
kg
Weight
18.5
21.0
28.5
33.5
44.0
53.0
63.5
100
113
198
236
251
317
397
513
562
933
1013
1086
1208
1581
1632
1734
11
Performance data notes
Speed / torque & speed / current curves
DOL starting
Typical speed/current curve Typical speed/torque curve
(IA) Starting current(IN) Full load current(MA) Starting torque or locked rotor torque(MS) Pull up torque or run up torque(MK) Pull out torque or breakdown torque(MN) Full load torque
Torque/speed curves for specific motors can besupplied on request.
J (WK2 or WR2) =
J in lb ft2 =
GD2
4kgm2
0.042
During the run up period in Star, there must be anadequate excess of motor torque over the loadtorque. The change to Delta must not occur untilthe motor is near the operating speed. Refer toBrook Crompton for running up against a load inexcess of 70% full load during Star Delta starting.
Performance figures are subject to IECtolerances. Performance figures are based on a400 volt winding.
Connection diagrams
W2
D.O.L
∆
Y∆
U2 V2
W2 U2 V2
U1 V1 W1
L1 L2 L3
U1 V1 W1
W2 U2 V2
W2 U2 V2
U1 V1 W1
L1 L2 L3
U1 V1 W1
∆
Y
SSttaarr DDeellttaa DDuuaall vvoollttaaggee
Motors => 4kW
TThheerrmmiissttoorrss
P1 P2
Connect to thermistor control unit.
12
Dimensions
Foot, flange and face mounting - frame sizes 56 to 160 aluminium
IM B3IM 1001
Mounting options
IM B14/IM B34IM 3601/IM 2101
Mounting options
IM B5/IM B35IM 3001/IM 2001
Mounting options
B CRS
L
EBTBW
E C
BB
KKED
L
LA
P N
T
A CRS
AB
AA
K
HA
HHE
HD
TBH
AC
AA
4 HOLES SON M PCD
45°
L
LA
P N
T
HOLES SON M PCD
45°
IIEE11
13
Dimensions
Foot, flange and face mounting - frame sizes 56 to 160 aluminium
BB--DDAA5566MM
BB--DDAA6633MM
BB--DDAA7711MM
BB--DDAA8800MM
BB--DDAA9900SS
BB--DDAA9900LL
BB--DDAA110000LL
BB--DDAA111122MM
BB--DDAA113322SS
BB--DDAA113322MM
BB--DDAA116600MM
BB--DDAA116600LL
90
100
112
125
140
140
160
190
216
216
254
254
General
A
71
80
90
100
100
125
140
140
140
178
210
254
B
36
40
45
50
56
56
63
70
89
89
108
108
C
56
63
71
80
90
90
100
112
132
132
160
160
H
5.8 x 8.3
7 x 9.5
7 x 11
10 x 14
10 x 14
10 x 14
12 x 16
12 x 16
12 x 16
12 x 16
15 x 18
15 x 18
K KKL AA AB AC BB HA HD TBW
1 x M20
1 x M20
1 x M20
1 x M20
1 x M20
1 x M20
1 x M20
2 x M32
2 x M32
2 x M32
2 x M40
2 x M40
199
217
245
287
310
335
383
401
475
513
609
653
23
24
26
35
37
37
40
41
51
51
55
55
111
123
138
157
173
173
196
227
262
262
304
304
113
120
136
155
175
175
195
219
258
258
315
315
88
100
110
125
125
150
172
180
186
224
260
304
7
7
8
9
10
10
11
12
15
15
18
18
153
166
183
205
228
228
252
294
320
320
397
397
86
101
101
101
109
109
109
119
119
119
155
155
86
101
101
101
109
109
109
119
119
119
164
164
TBH
IM B5 mounting
100
115
130
165
165
165
215
215
265
265
300
300
M
80
95
110
130
130
130
180
180
230
230
250
250
N
120
140
160
200
200
200
250
250
300
300
350
350
P
8
10
10
12
11
11
13
14
14
14
15
15
LA
7
10
10
12
12
12
14.5
14.5
14.5
14.5
18.5
18.5
S
3
3
3.5
3.5
3.5
3.5
4.0
4.0
4.0
4.0
5.0
5.0
T
IM B14 mounting
65
75
85
100
115
115
130
130
165
165
215
215
M
50
60
70
80
95
95
110
110
130
130
180
180
N
80
90
105
120
140
140
160
160
200
200
250
250
P
-
-
-
-
14
14
15
15
17
17
-
-
LA
M5
M5
M6
M6
M8
M6
M8
M8
M10
M10
M12
M12
S
2.5
2.5
2.5
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4
4
T
TTyyppee
Shaft
For tolerance details and notes - see page 22
BB--DDAA5566
BB--DDAA6633
BB--DDAA7711
BB--DDAA8800
BB--DDAA9900
BB--DDAA110000
BB--DDAA111122MM
BB--DDAA113322
BB--DDAA116600
9
11
14
19
24
28
28
38
42
D
M4
M4
M5
M6
M8
M10
M10
M12
M16
DH
3
4
5
6
8
8
8
10
12
F
20
23
30
40
50
60
60
80
110
E
7.2
8.5
11
15.5
20
24
24
33
37
G
16
16
25
30
40
50
50
65
90
EB
TAPPED
HOLE DH
F
D
GD
G
BB--DDAA5566MM
BB--DDAA6633MM
BB--DDAA7711MM
BB--DDAA8800MM
BB--DDAA9900SS
BB--DDAA9900LL
BB--DDAA110000LL
BB--DDAA111122MM
BB--DDAA113322SS
BB--DDAA113322MM
BB--DDAA116600MM
BB--DDAA116600LL
3
4
5
6
7
7
7
8
8
GDAluminium
2
3.5
2.5
5
5
5
5
7.5
10
ED
Terminal box}
IIEE11
TTyyppee
Aluminium
TTyyppee
Aluminium
Flange & Face
HE
72
78
87
102.5
107.5
107.5
121.5
147.5
153.5
153.5
194.5
194.5
14
Dimensions
Foot and flange mounting - frame sizes 180 to 355 cast iron
IM B3IM 1001
Mounting options
IM B5/IM B35IM 3001/IM 2001
Mounting options
B CRS
L
EBTBW
E C
BB
KKED
L
LA
P N
T
A CRS
AB
AA
K
HA
HHE
HD
TBH
AC
AA
4 HOLES SON M PCD
45°
8 HOLES SON M PCD (1)
22.5°
8 holes at 22.5° for flanges to suit 225 frames and above to European specification
Up to 200 frame
IIEE11
15
Dimensions
Foot and flange mounting - frame sizes 180 to 355 cast iron
For tolerance details and notes - see page 22
TAPPED
HOLE DH
F
D
GD
G
BB--DDFF118800MM
BB--DDFF118800LL
BB--DDFF220000LL
BBUU--DDFF222255SS
BBUU--DDFF222255MM
BBUU--DDFF225500MM
BBUU--DDFF228800SS
BBUU--DDFF228800MM
BBUU--DDFF331155SS
BBUU--DDFF331155MM
BBUU--DDFF331155LL
BBUU--DDFF335555MM
BBUU--DDFF335555LL
279
279
318
356
356
406
457
457
508
508
508
610
610
GeneralTerminal box
A
241
279
305
286
311
349
368
419
406
457
508
560
630
B
121
121
133
149
149
168
190
190
216
216
216
254
254
C
180
180
200
225
225
250
280
280
315
315
315
355
355
H
14.5
14.5
16.5
18.5
18.5
24
24
24
28
28
28
28
28
K
2 x M40
2 x M40
2 x M50
2 x M50
2 x M50
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
KK
688
726
771
824
849
910
982
1033
1208
1318
1318
1556
1556
L
70
70
70
75
75
80
85
85
120
120
120
116
116
AA
349
349
388
431
431
484
542
542
628
628
628
726
726
AB
355
355
397
446
446
485
547
547
620
620
620
698
698
AC
311
349
369
368
393
445
485
536
570
680
680
750
750
BB
22
22
25
28
28
30
35
35
45
45
45
52
52
HA
450
450
504
552
552
613
667
667
842
842
842
997
997
HD
162
162
210
210
210
248
248
248
320
320
320
380
380
TBH
152
152
190
190
190
218
218
218
280
280
280
330
330
TBW
IM B5, IM B35 mounting
300
350
400
500
500
600
740
M
250
300
350
450
450
550
680
N
350
400
450
550
550
660
800
P
15
17
20
22
22
22
25
LA
18.5
18.5
18.5
18.5
18.5
24
24
S
5
5
5
5
5
6
6
T
BB--DDFF118800MM//LL
BBUU--DDFF220000LL
BBUU--DDFF222255SS
BBUU--DDFF222255MM
BBUU--DDFF225500MM
BBUU--DDFF228800SS//MM
BBUU--DDFF331155SS//MM//LL
BBUU--DDFF335555MM//LL
Shaft
48
55
60
60
65
75
80
100
D
M16
M20
-
M20
M20
M20
M20
M20
DH
14
16
18
18
18
20
22
25
F
42.5
49
53
53
58
67.5
71
90
G
90
100
125
125
125
125
160
160
EB
48
55
_
55
60
65
65
75
D
110
110
_
110
140
140
140
140
E
14
16
_
16
18
18
18
20
F
42.5
49
_
49
53
58
58
67.5
G
110
110
140
140
140
140
170
210
E
90
100
_
100
125
125
125
125
EB
9
10
11
11
11
12
14
16
GD
9
10
_
10
11
11
11
12
GD
10
5
7.5
7.5
7.5
7.5
5
25
ED
10
5
-
5
7.5
7.5
7.5
7.5
ED
M16
M20
M20
M20
M20
M20
M20
M24
DH
2 pole4 pole +
HE
229
229
249
270
270
299
333
333
445
445
445
544.5
544.5
688
726
771
-
819
910
982
1033
1178
1288
1288
1487
1487
L
4 Pole +
2 Pole
BB--DDFF118800MM//LL
BB--DDFF220000LL
BBUU--DDFF222255SS//MM
BBUU--DDFF225500
BBUU--DDFF228800
BBUU--DDFF331155SS//MM//LL
BBUU--DDFF335555MM//LL
}
IIEE11
Flange
TTyyppee
Cast iron
TTyyppee
Cast iron
TTyyppee
Cast iron
16
Dimensions
Foot, flange and face mounting - frame sizes 80 to 160 aluminium
IM B3IM 1001
Mounting options
IM B14/IM B34IM 3601/IM 2101
Mounting options
IM B5/IM B35IM 3001/IM 2001
Mounting options
B CRS
L
EBTBW
E C
BB
KKED
L
LA
P N
T
A CRS
AB
AA
K
HA
HHE
HD
TBH
AC
AA
4 HOLES SON M PCD
45°
L
LA
P N
T
HOLES SON M PCD
45°
IIEE22
17
Dimensions
Foot, flange and face mounting - frame sizes 80 to 160 aluminium
AA--DDAA8800MM
AA--DDAA9900SS
AA--DDAA9900LL
AA--DDAA110000LL
AA--DDAA111122MM
AA--DDAA113322SS
AA--DDAA113322MM
AA--DDAA116600MM
AA--DDAA116600LL
125
140
140
160
190
216
216
254
254
General
A
100
100
125
140
140
140
178
210
254
B
50
56
56
63
70
89
89
108
108
C
80
90
90
100
112
132
132
160
160
H
10 x 14
10 x 14
10 x 14
12 x 16
12 x 16
12 x 16
12 x 16
15 x 18
15 x 18
K KKL AA AB AC BB HA HD TBW
1 x M20
1 x M20
1 x M20
1 x M20
2 x M32
2 x M32
2 x M32
2 x M40
2 x M40
290
325
350
398
440
475
513
609
653
35
37
37
40
41
51
51
55
55
157
173
173
196
227
262
262
304
304
158
175
175
198
219
258
258
315
315
125
125
150
172
180
186
224
260
304
8
10
10
11
12
15
15
18
18
213
233
233
260
281
320
320
402
402
101
109
109
109
119
119
119
155
155
101
109
109
109
119
119
119
164
164
TBH
IM B5 mounting
165
165
165
215
215
265
265
300
300
M
130
130
130
180
180
230
230
250
250
N
200
200
200
250
250
300
300
350
350
P
12
11
11
13
14
14
14
15
15
LA
12
12
12
14.5
14.5
14.5
14.5
18.5
18.5
S
3.5
3.5
3.5
4.0
4.0
4.0
4.0
5.0
5.0
T
IM B14 mounting
100
115
115
130
130
165
165
215
215
M
80
95
95
110
110
130
130
180
180
N
120
140
140
160
160
200
200
250
250
P
-
14
14
15
15
17
17
-
-
LA
M6
M8
M6
M8
M8
M10
M10
M12
M12
S
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4
4
T
TTyyppee
Shaft
For tolerance details and notes - see page 22
AA--DDAA8800
AA--DDAA9900
AA--DDAA110000
AA--DDAA111122MM
AA--DDAA113322
AA--DDAA116600
19
24
28
28
38
42
D
M6
M8
M10
M10
M12
M16
DH
6
8
8
8
10
12
F
40
50
60
60
80
110
E
15.5
20
24
24
33
37
G
30
40
50
50
65
90
EB
TAPPED
HOLE DH
F
D
GD
G
AA--DDAA8800MM
AA--DDAA9900SS
AA--DDAA9900LL
AA--DDAA110000LL
AA--DDAA111122MM
AA--DDAA113322SS
AA--DDAA113322MM
AA--DDAA116600MM
AA--DDAA116600LL
6
7
7
7
8
8
GDAluminium
5
5
5
5
7.5
10
ED
Terminal box}
IIEE22
TTyyppee
Aluminium
TTyyppee
Aluminium
Flange & Face
HE
104
112
112
124
135
153.5
153.5
194.5
194.5
18
Dimensions
Foot and flange mounting - frame sizes 180 to 355 cast iron
IM B3IM 1001
Mounting options
IM B5/IM B35IM 3001/IM 2001
Mounting options
B CRS
L
EBTBW
E C
BB
KKED
L
LA
P N
T
A CRS
AB
AA
K
HA
HHE
HD
TBH
AC
AA
4 HOLES SON M PCD
45°
8 HOLES SON M PCD (1)
22.5°
8 holes at 22.5° for flanges to suit 225 frames and above to European specification
Up to 200 frame
IIEE22
19
Dimensions
Foot and flange mounting - frame sizes 180 to 355 cast iron
For tolerance details and notes - see page 22
TAPPED
HOLE DH
F
D
GD
G
AA--DDFF118800MM
AA--DDFF118800LL
AA--DDFF220000LL
AAUU--DDFF222255SS
AAUU--DDFF222255MM
AAUU--DDFF225500MM
AAUU--DDFF228800SS
AAUU--DDFF228800MM
AAUU--DDFF331155SS
AAUU--DDFF331155MM
AAUU--DDFF331155LL
AAUU--DDFF335555MM
AAUU--DDFF335555LL
279
279
318
356
356
406
457
457
508
508
508
610
610
GeneralTerminal box
A
241
279
305
286
311
349
368
419
406
457
508
560
630
B
121
121
133
149
149
168
190
190
216
216
216
254
254
C
180
180
200
225
225
250
280
280
315
315
315
355
355
H
14.5
14.5
16.5
18.5
18.5
24
24
24
28
28
28
28
28
K
2 x M40
2 x M40
2 x M50
2 x M50
2 x M50
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
2 x M63
KK
688
726
779
824
849
910
982
1033
1224
1334
1334
1516
1516
L
70
70
70
75
75
80
85
85
120
120
120
116
116
AA
349
349
388
431
431
484
542
542
628
628
628
726
726
AB
355
355
397
446
446
485
547
547
620
620
620
698
698
AC
311
349
369
368
393
445
485
536
570
680
680
750
750
BB
22
22
25
28
28
30
35
35
45
45
45
52
52
HA
450
450
504
561
561
610
669
669
842
842
842
997
997
HD
162
162
210
210
210
248
248
248
320
320
320
380
380
TBH
152
152
190
190
190
218
218
218
280
280
280
330
330
TBW
IM B5, IM B35 mounting
300
350
400
500
500
600
740
M
250
300
350
450
450
550
680
N
350
400
450
550
550
660
800
P
15
17
20
22
22
22
25
LA
18.5
18.5
18.5
18.5
18.5
24
24
S
5
5
5
5
5
6
6
T
AA--DDFF118800MM//LL
AAUU--DDFF220000LL
AAUU--DDFF222255SS
AAUU--DDFF222255MM
AAUU--DDFF225500MM
AAUU--DDFF228800SS//MM
AAUU--DDFF331155SS//MM//LL
AAUU--DDFF335555MM//LL
Shaft
48
55
60
60
65
75
80
100
D
M16
M20
-
M20
M20
M20
M20
M20
DH
14
16
18
18
18
20
22
25
F
42.5
49
53
53
58
67.5
71
90
G
90
100
125
125
125
125
160
160
EB
48
55
_
55
60
65
65
75
D
110
110
_
110
140
140
140
140
E
14
16
_
16
18
18
18
20
F
42.5
49
_
49
53
58
58
67.5
G
110
110
140
140
140
140
170
210
E
90
100
_
100
125
125
125
125
EB
9
10
11
11
11
12
14
16
GD
9
10
_
10
11
11
11
12
GD
10
5
7.5
7.5
7.5
7.5
5
25
ED
10
5
-
5
7.5
7.5
7.5
7.5
ED
M16
M20
M20
M20
M20
M20
M20
M24
DH
2 pole4 pole +
HE
226.5
226.5
249
278
278
303
333
333
445
445
445
540
540
688
726
771
-
819
910
982
1033
1194
1304
1304
1487
1487
L
4 Pole +
2 Pole
AA--DDFF118800MM//LL
AA--DDFF220000LL
AAUU--DDFF222255SS//MM
AAUU--DDFF225500
AAUU--DDFF228800
AAUU--DDFF331155SS//MM//LL
AAUU--DDFF335555MM//LL
}
IIEE22
TTyyppee
Cast iron
TTyyppee
Cast iron
TTyyppee
Cast iron
Flange
20
Dimensions
Foot and flange mounting - frame sizes 355LB to 450 cast iron
TBW
L
EBED
E CBB
B1
B2
AC
TBH
AA
A CRSAB
HD
H
HA
K
KK
TBW
L
EBED
E CBB
B1
B2
AC
TBH
AA
A CRSAB
HD
H
HA
K
KK
IM B3IM 1001
Mounting options
IM B35IM 2001
Mounting options
8 HOLES SON M PCD (1)
22.5°
L
LA
P N
T
8 HOLES SON M PCD (1)
22.5°
L
LA
P N
T
21
Dimension
Foot and flange mounting - frame sizes 355LB to 450 cast iron
TAPPED
HOLE DH
F
D
GD
G
BBUU--DDFF335555BB ++
BBUU--DDFF440000MM
BBUU--DDFF440000LL
BBUU--DDFF445500MM
BBUU--DDFF445500LL
630
686
686
800
800
GeneralTerminal box
A
800
630
630
900
900
B1
224
280
280
250
250
C
355
400
400
450
450
H
35
36
36
36
36
K
3 x M63
3 x M63
3 x M63
3 x M63
3 x M63
KK
1898
1881
1881
2200
2200
L
116
120
120
150
150
AA
760
806
806
950
950
AB
745
860
860
950
950
AC
1140
1090
1090
1200
1200
BB
52
52
55
62
62
HA
1120
1080
1080
1400
1400
HD
572
485
485
530
530
TBH
392
430
430
460
460
TBW
IM B5, IM B35 mounting
840
940
1040
M
780
880
980
N
800
1000
1100
P
-
-
-
LA
24
28
32
S
6
6
8
T
BBUU--DDFF335555
BBUU--DDFF440000
BBUU--DDFF445500
Shaft
110
110
130
D
M20
M24
M24
DH
28
28
32
F
86
100
119
G
160
180
180
EB
80
85
90
D
170
170
170
E
22
22
25
F
67.5
76
86
G
210
210
250
E
130
140
140
EB
16
16
16
GD
14
14
14
GD
5
15
15
ED
5
15
15
ED
M24
M24
M24
DH
2 pole4 pole +
1863
1820
1820
2050
2050
L
4 Pole
2 Pole
BBUU--DDFF335555
BBUU--DDFF440000
BBUU--DDFF445500
}TTyyppee
Cast iron
TTyyppee
Cast iron
TTyyppee
Cast iron
Flange
1918
1881
1881
2200
2200
L
6, 8 Pole
-
710
710
1000
1000
B2
For tolerance details and notes - see page 22
22
Dimension pages notes & mounting codes
Page notes
Horizontal shaft:Horizontal shaft:
Vertical shaft:Vertical shaft:
IM B3IM B3IM 1001IM 1001
foot mounted
IM B5IM B5IM 3001IM 3001
flange at DEno feet
IM B14IM B14IM 3601 IM 3601 face at DE
no feet
IM B6IM B6IM 1051IM 1051
foot wall mounted withfeet on left-hand sidewhen viewed from DE
IM B7IM B7IM 1061IM 1061
foot wall mounted withfeet on right-hand sidewhen viewed from DE
IM B8IM B8IM 1071IM 1071
ceiling mountedwith feet
above motor
IM V1IM V1IM 3011IM 3011
flange at DEshaft down
no feet
IM V3IM V3IM 3031IM 3031
flange at DEshaft upno feet
IM V5IM V5IM 1011IM 1011
vertical footwall mountedshaft down
IM V6IM V6IM 1031IM 1031
vertical footwall mounted
shaft up
IM V18IM V18IM 3611IM 3611
face at DEshaft down
no feet
IM V19IM V19IM 3631IM 3631
face at DEshaft upno feet
110
130
230 to 250
300
350
450
550
680
FFllaannggee
j6
j6
j6
j6
j6
j6
j6
js6
DDiimm NN
+0.013
–0.009
+0.014
–0.011
+0.016
–0.013
+0.016
-0.016
+0.018
-0.018
+0.020
-0.020
+0.022
-0.022
+0.025
-0.025
TTooll LLiimmiittss
70 and 80
95 and 110
130
230
FFaaccee
j6
j6
j6
j6
DDiimm NN
+0.012
–0.007
+0.013
–0.009
+0.014
–0.011
+0.016
–0.013
TTooll LLiimmiittss
TAPPED
HOLE DH
F
D
GD
G
All dimensions in millimetres
Cable entry can be arranged in any one of fourpositions at 90° intervals
Dimensions should not be used for installationpurposes unless specially endorsed
11 to 14
19 to 28
38 to 48
55 to 80
85 to 110
SShhaafftt
j6
j6
k6
m6
m6
DDiimm DD
+0.008
–0.003
+0.009
–0.004
+0.018
+0.002
+0.030
+0.011
+0.035
+0.013
TTooll LLiimmiittss
IIEECC 6600007722
B5 mounted motors have suffix ‘-D’ in the frame reference, eg A-DA132MA-D and B3/B5mounted motors have suffix ‘-H’ in the framereference, eg A-DA132MA-H
B14 mounted motors have suffix ‘C’ in the frame reference, eg A-DA132MA-C and B3/B14mounted motors have suffix ‘-H’ in the framereference, eg A-DA132MA-H
Note355LB frame and above, flange only availablewhen B35 mounted (foot & flange).
IIEECC 6600007722
Mounting codes
23
Technical information
Mechanical
__
__
__
__
__
__
__
__
__
BB // AA--DDFF118800MM//LL
BB // AA--DDFF220000LL
BB // AAUU--DDFF222255SS//MM
BB // AAUU--DDFF225500SS//MM
BB // AAUU--DDFF228800SS//MM
BB // AAUU--DDFF228800SS//MM
BB // AAUU--DDFF331155SS//MM//LL
BB // AAUU--DDFF331155SS//MM//LL
BB // AAUU--DDFF335555MM//LL
BB // AAUU--DDFF335555MM//LL
BBUU--DDFF440000
BBUU--DDFF440000
BBUU--DDFF445500
BBUU--DDFF445500
BBeeaarriinngg rreeffeerreenncceess aanndd ooiillsseeaallss ffoorr hhoorriizzoonnttaallllyy mmoouunntteedd mmoottoorrss oonnllyy
All
All
All
All
All
All
All
All
All
All
All
All
All
2
4 up
2
4 up
2
4 up
2
4 up
2
4 up
(1) Frame sizes 56-160 have sealed for life bearings with C3 clearances. Frame sizes 180-355 have bearings with C3 clearance.(2) Sizes given are in mm and represent bore x outside diameter x width.The seal material used on all frame sizes and all polarity is nitrile rubber (NBR).
TTyyppee
BB // AA--DDAA5566
BB // AA--DDAA6633MM
BB // AA--DDAA7711MM
BB // AA--DDAA8800MM
BB // AA--DDAA9900SS//LL
BB // AA--DDAA110000LL
BB // AA--DDAA111122MM
BB // AA--DDAA113322SS//MM
BB // AA--DDAA116600MM//LL
__
__
__
__
__
__
__
__
__
__
__
__
__
__
Cast ironAluminium Poles
Bearings((11)) Oilseals((22))
Bearing arrangements
6201ZZ
6201ZZ
6202ZZ
6204ZZ
6205ZZ
6206ZZ
6206ZZ
6208ZZ
6309ZZ
6311
6312
6313
6314
6314
6317
6317
NU319
6319
NU322
NU2194E &6219
NU326E
NU222E & 6222
6328
12 x 25 x 7
12 x 25 x 7
15 x 30 x 7
20 x 35 x 7
25 x 40 x 7
30 x 47 x 7
30 x 47 x 7
40 x 62 x 7
45 x 62 x 12
55 x 75 x 12
60 x 80 x 12
65 x 90 x 12
70 x 90 x 12
70 x 90 x 12
85 x 110 x 12
85 x 110 x 12
95 x 120 x 12
95 x 120 x 12
110 x 140 x 14
84.5 x 97 x 10
119 x 140 x 14
110 x 124 x 12
140 x 154 x 15
6201ZZ
6201ZZ
6202ZZ
6204ZZ
6205ZZ
6206ZZ
6206ZZ
6208ZZ
6309ZZ
6311
6312
6313
6314
6314
6317
6317
6319
6319
6322
7219B
6326
7222B
6328
Drive end Non-drive end Drive end Non-drive end
12 x 25 x 7
12 x 25 x 7
15 x 30 x 7
20 x 35 x 7
25 x 40 x 7
30 x 47 x 7
30 x 47 x 7
40 x 62 x 7
45 x 62 x 12
55 x 75 x 12
60 x 80 x 12
60 x 90 x 12
70 x 90 x 12
70 x 90 x 12
85 x 110 x 12
85 x 110 x 12
95 x 120 x 12
95 x 120 x 12
110 x 140 x 14
84.5 x 97 x 10
119 x 140 x 14
110 x 124 x 12
140 x 154 x 15
Brook CromptonSt Thomas’ Road HuddersfieldWest Yorkshire HD1 3LJ UKTel: +44 (0) 1484 557200Fax: +44 (0) 1484 557201E-mail: [email protected]: www.brookcrompton.com
Printed in Englanddh1002/*/*/03/10 20101E Issue 1 (Series 10)
© Copyright 2010. Brook Crompton. All rights reserved.
Every care has been taken to ensure the accuracy of the
information contained in this publication, but, due to a policy of
continuous development and improvement the right is reserved
to supply products which may differ slightly from those
illustrated and described in this publication