11
ApplicationSurge arrester designed toprotect 12 and 24 kV classcomponents, includingtransformers, equipment, cableand accessories from highvoltage surges resulting fromlightning or switching.
Up to 24 kV
156SAINTERFACE A
SURGE ARRESTER
Technical characteristics• This surge arrester is a metal
oxide varistor surge arrester inan elbow configuration.
• Each arrester is tested forAC withstand and partialdischarge prior to leaving thefactory.
Surgearrester
type
Nominaldischarge
currentIn (kA)
Ratedvoltage
Ur(kV)
Max. continuousoperatingvoltageUc (kV)
Steep currentresidual
voltage @ 5 kA[1/20 µs] (kV)
Lightning currentresidual
voltage @ 5 kA[8/20 µs] (kV)
High currentimpulse
withstand(kA)
156SA-12156SA-15156SA-18156SA-21156SA-24
55555
1519222630
12.515.518.021.024.5
62.577.087.0
101.5116.5
54.569.079.093.5108.5
4040404040
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
DesignSurge arrester comprising:
1. Bail restraint.2. Conductive EPDM insert.3. Type A - 250 A interface
as described by CENELECEN 50180 and 50181.
4. Pin contact.5. Contact disc.6. Copper shunt.7. Metal oxide valve elements.8. Aluminium spacer.9. Steel cap.
10. Earth connection.11. Insulating EPDM layer
moulded between the insertand the jacket.
12. Conductive EPDM jacket.
12
11
9
10
5
2
6
3
4
5
8
6
1
7
12
Typical application anddimensions
Ordering instructionsTo order the surge arrester,specify the surge arrester type,as described on previous page.
Example:For a maximum continuousoperating voltage (rms) of 21 kV.Order a 156SA-21 surgearrester.
330
K400TE/G orK400TB/Gconnector
K400RTPAreducing tap plug
220 195
156
131
415
Surge arrester156SA-24